Advent RW3 SERIES Manuale utente

RW3 SERIES NOTEBOOK PC

USER'S MANUAL

May 2005

ENGLISH

2

ENGLISH

FRANÇAIS

DEUTSCH

ESPAÑOL

ITALIANO

CONTENTS

BEFORE YOU START ............................................................................................. 5

Make sure you have everything ..................................................................................... 5

Familiarize yourself with the computer ........................................................................ 6

OPENING THE DISPLAY PANEL ................................................................................ 6

FRONT OVERVIEW .................................................................................................... 7

LEFT SIDE OVERVIEW .............................................................................................. 9

RIGHT SIDE OVERVIEW .......................................................................................... 10

BACK OVERVIEW ..................................................................................................... 11

BOTTOM OVERVIEW ................................................................................................ 12

GETTING STARTED ............................................................................................. 13

Power Sources ............................................................................................................. 13

CONNECTING THE POWER ADAPTERS ............................................................... 13

RECHARGING THE BATTERY ................................................................................. 14

Starting Your Notebook................................................................................................. 15

POWER ON .............................................................................................................. 15

Status Indicators ...................................................................................................... 16

Using Function Keys ................................................................................................ 18

Using the TouchPad................................................................................................. 19

Memory Module Upgrade......................................................................................... 20

TROUBLESHOOTING ........................................................................................... 21

Identifying the Problem................................................................................................. 21

APPENDIX ............................................................................................................ 22

Notebook Specifications .............................................................................................. 22

3

TAKING CARE OF YOUR NOTEBOOK PC

DO NOT place or drop objects on the computer

and DO NOT apply heavy pressure on it.

DO NOT subject the computer to magnetic

fields.

To prevent possible overheating of the computer's

processor, make sure you don't block the open-

ings provided for ventilation.

DO NOT press or touch the display panel.

DO NOT place on uneven or unstable work

surfaces.

DO NOT use your notebook computer under

harsh conditions.

DO NOT expose to direct sunlight. DO NOT use or store in extreme temperatures.

4

ENGLISH

FRANÇAIS

DEUTSCH

ESPAÑOL

ITALIANO

DO NOT expose to dust and/or corrosive

chemicals.

DO NOT spray water or any other cleaning flu-

ids directly on the display.

DO NOT slam your notebook shut and never

pick up or hold your notebook by the display.

If you are traveling with your computer, remem-

ber to carry it as hand luggage. Do not check it in

as baggage.

DO NOT place near fire or other sources of heat. DO NOT tamper with the batteries. Keep them

away from children.

Avoid sudden changes in temperature or humid-

ity by keeping it away fromA/C and heating vents.

DO NOT expose the computer to rain or

moisture.

5

BEFORE YOU START

Make sure you have everything

When you receive your notebook PC, unpack it carefully, and check to make sure you have all the

items listed below. For a pre-configured model you should have the following:

• Notebook Computer

• Lithium ion battery

• AC adapter with AC power cord

• Driver and Applications CD

• Quick Start Guide or User Guide

Depending upon the configuration of your notebook, you may also need following items:

• DVD Application CD

• DVD / CD-RW Combo Application CD

• DVD+/- RW Application CD

Once you have checked and confirmed that your notebook system is complete, read through the

following pages to learn about all of your notebook components.

BEFORE YOU START

6

ENGLISH

FRANÇAIS

DEUTSCH

ESPAÑOL

ITALIANO

Familiarize yourself with the computer

OPENING THE DISPLAY PANEL

The lid locks to the computer chassis automatically.

To open, simply lift the lid up. When closing it, be sure not to slam it shut.

BEFORE YOU START

7

Display Panel

Quick Start Buttons

Keyboard

TouchPad

Pointing Device

Stereo Speakers

Suspend/Resume/

Power On Button

Stereo Speakers

Status Indicator Lights

FRONT OVERVIEW

The following is an overview of the front of the notebook.

Display Panel

The display panel is a color LCD panel with back lighting for the display of text and graphics.

Keyboard

A full-size keyboard with dedicated Windows keys.

Stereo Speakers

The built-in dual speakers allow for stereo sound.

BEFORE YOU START

8

ENGLISH

FRANÇAIS

DEUTSCH

ESPAÑOL

ITALIANO

Status Indicator Lights

The Status indicator lights correspond to specific operating modes. These modes are: Power On/

Suspend Status, Battery Status, Hard Drive Activity, Wireless LAN Status, Scroll Lock, Caps

Lock, and NumLock.

TouchPad Pointing Device

The TouchPad pointing device is a mouse-like cursor control with two buttons (left, right

buttons).

Suspend/Resume/Power On Button

This button turns your notebook on and off as well as puts it to sleep. (See Suspend/Resume/

Power On Button in the Power On section for more information.)

Quick Start Buttons

The three quick start buttons allow you to launch your favorite email and Internet applications

with the press of a button and one customize button.

BEFORE YOU START

9

Modem (RJ-11) Port

Kensington

Lock Port

IEEE 1394 Port

Microphone Jack

USB Ports

Headphone Jack

LEFT SIDE OVERVIEW

The following is a brief description of the left side of the notebook.

Kensington Lock Port

The Kensington lock slot allows you to secure your notebook to an immovable object through an

optional security cable.

Modem (RJ-11) Port

The modem (RJ-11) port is used to attach a telephone line to the internal 56K modem.

IEEE 1394 Port

The 1394 port is used to connect between your and a peripheral such as a digital video camera.

USB Port

The USB port allows you to connect a Universal Serial Bus device. It supports v2.0 of the USB

standard, which allows data exchange rates as high as 480 Mb/s.

Headphone Jack

The headphone jack allows you to connect headphones or external speakers and amplifiers.

Microphone Jack

The microphone jack allows you to connect an external mono microphone.

BEFORE YOU START

10

ENGLISH

FRANÇAIS

DEUTSCH

ESPAÑOL

ITALIANO

Optical Drive

Optical Drive Eject Button

PC Card Slot

Power Adapter Port

Memory Card Reader

USB Port

LAN Port (RJ-45)

Emergency

Tray Release

RIGHT SIDE OVERVIEW

The following is a brief description of the right side of the notebook.

Optical Drive

The Optical Drive allows you to play back a media discs, such as CDs and DVDs.

Optical Drive Eject Button

The Optical Drive Eject Button allows you to open the Optical Drive tray to remove or insert a

DVD or CD.

Emergency Tray Release

The Emergency Tray Release allows you to open the Optical Drive tray without powering on

your notebook.

Memory Card Reader

The memory card reader offers the fastest and most convenient method to transfer pictures, music

and data between your notebook and flash compatible devices such as digital cameras, MP3

players, mobile phones, and PDAs.

PC Card Slot

The PC Card Slot allows you to install one Type II PC Card.

USB Port

The USB port allows you to connect a Universal Serial Bus device. It supports v2.0 of the USB

standard, which allows data exchange rates as high as 480 Mb/s.

LAN Port (RJ-45)

The LAN port is designed to support a 10/100/1000 Base-T standard RJ-45 plug.

Power Adapter Port

The power adapter port allows you to plug in the AC adapter to power your notebook and charge

the internal Lithium ion battery.

BEFORE YOU START

11

USB Ports

External Monitor Port

BACK OVERVIEW

The following is an overview of the back of the notebook.

USB Ports

The USB ports allow you to connect Universal Serial Bus devices. They support v2.0 of the USB

standard, which allows data exchange rates as high as 480 Mb/s.

External Monitor Port

The external monitor port allows you to connect an external monitor.

BEFORE YOU START

12

ENGLISH

FRANÇAIS

DEUTSCH

ESPAÑOL

ITALIANO

Fan Outlets

Wireless LAN Card Compartment

Memory/HDD Compartment

Rating Label

Lithium Ion Battery Bay

BOTTOM OVERVIEW

The following is an overview of the bottom of the notebook.

Fan Outlets

These are open ports for the fan to dissipate heat from the computer's internal components. Do

not block or place the computer in such a position that you inadvertently allow the outlets to

become blocked.

Wireless LAN Card Compartment

This compartment contains the wireless LAN card.

Rating Label

The Rating label shows the model number and other information about your notebook.

Memory/HDD Compartment

The memory portion of the compartment contains the system RAM, while the HDD portion

contains the hard disk drive.

Lithium ion Battery Bay

The battery bay contains the internal Lithium ion battery. It can be drawn out for the removal of

the battery when stored over a long period of time or for swapping a discharged battery with a

charged Lithium ion battery.

13

GETTING STARTED

Power Sources

Your computer has two types of power source: a Lithium ion battery or an AC adapter.

CONNECTING THE POWER ADAPTERS

The AC adapter provides power for operating your notebook PC and charging the battery.

Connecting the AC Adapter

1. Plug the DC output cable into the DC power jack of your notebook PC.

2. Plug the AC adapter into an AC electrical outlet.

Switching from AC Adapter Power to Battery Power

1. Be sure that you have at least one charged battery installed.

2. Remove the AC adapter. Your notebook will automatically switch from DC power to battery

power.

The Lithium ion battery is not charged upon purchase. Initially, you will need

to connect the AC adapter to use your notebook PC.

NOTE

GETTING STARTED

14

ENGLISH

FRANÇAIS

DEUTSCH

ESPAÑOL

ITALIANO

RECHARGING THE BATTERY

The Lithium ion battery is recharged internally using the AC adapter. To recharge the battery,

make sure the battery is installed and the computer is connected to the AC.

There is no “memory effect” in Lithium ion batteries; therefore you do not need to discharge the

battery completely before recharging. The charge times will be significantly longer if your note-

book PC is in use while the battery is charging. If you want to charge the battery more quickly,

put your computer into Suspend mode, or turn it off while the adapter is charging the battery.

Low Battery State

When the battery charge is low, a notification message appears. If you do not respond to the low

battery message, the batteries continue to discharge until they are too low to operate. When this

happens, your notebook PC goes into Suspend mode. There is no guarantee your data will be

saved once the notebook reaches this point.

To protect your computer from damage, use only the power adapter that came

with it because each power adapter has its own power output rating.

Once your note computer goes into Suspend mode as a result of a dead battery you will be unable

to resume operation until you provide a source of power either from an adapter, or a charged

battery. Once you have provided power, you can press the Suspend/ Resume button to resume

operation. In Suspend mode, your data is maintained for some time, but if a power source is not

provided promptly, the Power indicator stops flashing and the goes out, in which case you have

lost the data that was not saved. Once you provide power, you can continue to use your com-

puter while an adapter charges the battery.

CAUTION

GETTING STARTED

15

Starting Your Notebook

POWER ON

Suspend/Resume/Power On Button

The suspend/resume/power on switch is used to turn on your notebook from its off state. Once

you have connected your AC adapter or charged the internal Lithium ion battery, you can power

on your notebook by pressing the suspend/resume/on button located above the keyboard. If you

need to take an extended break, press the button again to turn it off.

Do not carry your notebook around with the power on or subject it to shocks or

vibration, as you risk damaging the hard disk.

When you power on your notebook, it will perform a Power On Self Test (POST) to check the

internal parts and configuration for correct functionality. If a fault is found, your computer emits

an audio warning and or displays and error message.

Depending on the nature of the problem, you may be able to continue by starting the operating

system or by entering the BIOS setup utility and revising the settings.

After satisfactory completion of the Power On Self Test (POST), your notebook loads the

installed operating system.

Never turn off your notebook during the Power On Self Test (POST), or an

unrecoverable error may occur.

CAUTION

GETTING STARTED

16

ENGLISH

FRANÇAIS

DEUTSCH

ESPAÑOL

ITALIANO

Num Lock

Wireless LAN Activity

Hard Drive Activity Indicator

Power on/Suspend

Battery Indicator

Caps Lock

Scroll Lock

Status Indicators

The Status indicator lights correspond to specific operating modes. These modes are: Power On/

Suspend Status, Battery Status, Hard Drive Activity, Wireless LAN Status, Scroll Lock, Caps

Lock, and NumLock.

Power on/Suspend Indicator

The Power indicator lights con not whether your system is powered on. It has several different

states, each one indicating your notebook's operating mode.

• Steady On: This means that there is power to your notebook and that it is ready for use.

• Flashing: This means that your notebook is in Suspend mode.

• Steady Off (not visible): This means that your system is either in Save-to-Disk mode, or that

your notebook has been turned off with the power switch.

Battery Indicator

The Battery indicator light tells you whether the Lithium ion battery is charging or is already fully

charged.

• If you are charging your battery, the Battery indicator lights remains on even if your notebook

is shut off.

• If there is no battery activity, the power adapters are not connected, or the power switch is

Off, the Battery indicator will also be off.

• Batteries subjected to shocks, vibrations or extreme temperatures can be permanently damaged.

Suspend/Resume/Power On Button

Quick Start Button

GETTING STARTED

17

Hard Drive Activity Indicator

The Hard Drive Activity indicator tells you whether your internal hard drive is being accessed

and, if so, how fast.

Wireless LAN Activity Indicator

The Wireless LAN Activity indicator tells you whether your computer is connected to a wireless

network or not.

The Caps Lock Indicator

The Caps Lock indicator tells you that the keyboard is set to type in all capital letters.

The Num Lock Indicator

The Num Lock indicator states that the internal keyboard is set in ten-key numeric keypad mode.

The Scroll Lock Indicator

The Scroll Lock indicator states that the internal keyboard is set to Scroll Lock mode.

GETTING STARTED

18

ENGLISH

FRANÇAIS

DEUTSCH

ESPAÑOL

ITALIANO

Using Function Keys

Your computer has 12 function keys, F1 through F12. The functions assigned to these keys differ

for each application. You should refer to your software documentation to find out how these keys

are used.

The [FN] key provides extended functions for the notebook and is always used in conjunction

with another key.

• [FN+F1]: Pressing [F1] while holding [FN] places the notebook in suspend mode. Pressing

the Power button returns it to active mode.

• [FN+F2]: Pressing [F2] while holding down [FN] allows you to toggle between enabling and

disabling wireless network connection.

• [FN+F3]: Pressing [F3] while holding [FN] allows you to change your selection of where to

send your display video. Each time you press the combination of keys you will step to the

next choice. The choices, in order, are: built-in display panel only, both built-in display panel

and external monitor, or external monitor only.

• [FN+F4]: Pressing [F4] repeatedly while holding [FN] will lower the brightness of your

display.

• [FN+F5]: Pressing [F5] repeatedly while holding [FN] will increase the brightness of the

display.

• [FN+F6]: Pressing [F6] while holding [FN] will toggle the Audio Mute on and off.

• [FN+F7]: Pressing [F7] repeatedly while holding [FN] will decrease the volume of your

notebook PC.

• [FN+F8]: Pressing [F8] repeatedly while holding [FN] will increase the volume of your

notebook PC.

• [FN+F9]: Pressing [F9] while holding down [FN] allows you to toggle between playing and

pausing your optical drive.

• [FN+F10]: Pressing [F10] while holding [FN] stops the current media file.

• [FN+F11]: Pressing [F11] while holding [FN] goes back to the previous file.

• [FN+F12]: Pressing [F12] while holding [FN] goes to the next file.

• [FN+ESC]: Pressing [ESC] while holding [FN] enables Bluetooth.

GETTING STARTED

19

Using the TouchPad

A TouchPad pointing device comes built into your computer. It is used to control the movement

of the pointer to select items on your display panel.

The TouchPad consists of a cursor control, a left and right button. The cursor control works the

same way a mouse does, and moves the cursor around the display. It only requires light pressure

from the tip of your finger. The left and right buttons function the same as mouse buttons. The

actual functionality of the buttons may vary depending on the application that is being used.

Clicking

Clicking means pushing and releasing a button. To left-click, move the cursor to the item you wish

to select, press the left button once, and then immediately release it. To right click, move the

mouse cursor to the item you wish to select, press the right button once, and then immediately

release it. You also have the option to perform the clicking operation by tapping lightly on the

TouchPad once.

Double-Clicking

Double-clicking means pushing and releasing the left button twice in rapid succession. This

procedure does not function with the right button. To double-click, move the cursor to the item

you wish to select, press the left button twice, and then immediately release it. You also have the

option to perform the double-click operation by tapping lightly on the TouchPad twice.

Dragging

Dragging means pressing and holding the left button, while moving the cursor. To drag, move the

cursor to the item you wish to move. Press and hold the left button while moving the item to its

new location and then release it. Dragging can also be done using the TouchPad. First, tap the

TouchPad twice over the item you wish to move making sure to leave your finger on the pad after

the final tap. Next, move the object to its new location by moving your finger across the TouchPad,

and then release your finger.

GETTING STARTED

20

ENGLISH

FRANÇAIS

DEUTSCH

ESPAÑOL

ITALIANO

Memory Module Upgrade

Your notebook PC comes with either 128MB or 256MB of high speed Synchronous Dynamic

RAM (SDRAM) factory installed. To increase your notebook's memory capacity, you may

install an additional memory upgrade module. The memory upgrade must be a dual-in-line (DIMM)

SDRAM module.

Do not remove any screws from the memory upgrade module compartment except for the ones

specifically shown in the directions here.

Installing a Memory Module

To install a memory upgrade module follow these steps:

You must turn off the power before installing the memory upgrade module.

1. Turn off power to your notebook PC using the power switch, and remove any power adapter.

2. Place your notebook PC upside-down on a clean work surface.

3. Open the top cover all the way, so that it is lying flat on the work surface.

4. Remove the screws holding the memory/HDD compartment cover.

The memory upgrade module can be severely damaged by electrostatic discharge (ESD). Be sure

you are properly grounded when handling and installing the module.

5. Align the connector edge of the memory upgrade module, chip side up, with the connector slot

in the compartment.

6. Insert the memory upgrade module at a 45

o

C angle and press it firmly onto the connector.

7. Press the memory upgrade module down into the compartment until it locks underneath the

retaining clip. You will hear a click when it is properly in place.

8. Replace the cover and screw that were removed previously. Installation of the new memory

module is now complete.

The memory upgrade module is not something you routinely remove from your notebook PC.

Once it is installed, you should leave it in place unless you want to increase system memory

capacity.

La pagina sta caricando ...

Advent RW3 SERIES Manuale utente

Advent RW3 SERIES Manuale utente

in altre lingue

Altri documenti