Trendnet TV-IP322WI Manuale utente

TRENDnet User’s Guide

Table of Contents

i

Contents

Contents ............................................................................................... i

Product Overview ................................................................................ 3

Package Contents ........................................................................................................... 3

Features .......................................................................................................................... 3

Product Hardware Features ........................................................................................... 4

Warnings: ....................................................................................................................... 5

Cautions: ......................................................................................................................... 5

Plan for Installation .............................................................................. 5

Setup Camera with CD.......................................................................... 6

Option 1: Manually Connect Camera to Wireless Network ........................................... 6

Option 2: Connect Camera to a Wireless Network by WPS Button ............................. 10

Option 3: Connect Camera by Using a Network Cable (PoE)........................................ 14

Install Web Browser Plug-In for Camera Management Interface ......... 17

WiFi Camera Mounting ...................................................................... 19

Access Camera through the Web Browser .......................................... 20

System Management and Default Settings ................................................................. 20

Logging-in to the Camera ............................................................................................. 20

Basic Settings ..................................................................................... 22

Live View ....................................................................................................................... 22

Playback ........................................................................................................................ 23

Log ................................................................................................................................ 26

System .......................................................................................................................... 27

Advanced Settings .............................................................................. 27

System ............................................................................................... 27

Device Settings ............................................................................................................................ 27

User Accounts .............................................................................................................................. 28

Time Settings ............................................................................................................................... 29

Daylight Savings ........................................................................................................................... 29

Live View Settings ........................................................................................................................ 30

Maintenance ................................................................................................................................ 31

Network ............................................................................................. 32

TCP/IP .......................................................................................................................................... 32

Port .............................................................................................................................................. 33

DDNS ............................................................................................................................................ 33

PPPoE (ADSL) ............................................................................................................................... 34

SNMP ........................................................................................................................................... 34

802.1X .......................................................................................................................................... 36

IP Address Filter ............................................................................................................ 36

QoS (Quality of Service)................................................................................................ 37

UPnP ............................................................................................................................. 38

Wi-Fi ............................................................................................................................. 38

Video .................................................................................................. 39

Video Format ................................................................................................................ 39

Display Settings ............................................................................................................ 40

On Screen Display (OSD) Settings ................................................................................................ 43

Text Overlay ................................................................................................................................. 43

Privacy Mask ................................................................................................................................ 44

Video Recording ........................................................................................................................... 44

Event .................................................................................................. 45

Motion Detection......................................................................................................................... 45

Exception ..................................................................................................................................... 49

Snapshot ...................................................................................................................................... 49

Email ............................................................................................................................................ 50

TRENDnet User’s Guide

Table of Contents

ii

Storage .............................................................................................. 51

Storage Management .................................................................................................................. 51

SD Card Slot ................................................................................................................................. 52

Network Storage .......................................................................................................................... 52

FTP Server ..................................................................................................................... 53

Troubleshooting ................................................................................. 54

TRENDnet User’s Guide

TV-IP322WI

3

Product Overview

TV-IP322WI

Package Contents



TV-IP322Wi



Quick Installation Guide



CD-ROM (Utility, Software & User's guide)



Camera Mounting hardware (Drill template, mounting screws, network

cable waterproof cap)



Network cable (6 ft / 2M)



Power Adapter (12V 1A)

Features

TRENDnet’s Outdoor 1.3 MP HD WiFi IR Network Camera, model TV-IP322WI, provides

powerful 1.3 megapixel night vision (higher than 720p) in complete darkness for up to

30 meters (100 ft.). This ultra-compact camera is outdoor ready with an IP66 weather

rated housing, embedded WiFi N, and a MicroSD card slot. It comes with a free iOS and

Android™ mobile app and complimentary pro-grade software to manage up to 32

TRENDnet cameras.

.

1.3 Megapixel

Record up to 1280 x 960 pixel video (higher than 720p) at 30 fps in H.264 compression

Night Vision

Night vision up to 30 meters (100 ft.) in complete darkness

Adjustable Bracket

Adjustable integrated mounting bracket provides installation flexibility

WiFi N

Network the camera to an existing Wireless N (2.4 GHz) network

PoE

Supports a Power over Ethernet (IEEE 802.3af) network connection for an optional PoE

installation

Outdoor Ready

Outdoor IP66 weather rated and an operating temperature range of -30 – 60 °C (-22 –

140 °F)

Storage

Store video to a MicroSD (SDHC, SDXC) card up to 64 GB (sold separately) or set up SMB

or FTP Server storage

TRENDnet User’s Guide

TV-IP322WI

4

Smart IR

Dynamic IR adjustment optimizes night visibility

D-WDR

Digital Wide Dynamic Range improves video quality in high contrast lighting

environments

Advanced Playback

Advanced in-camera archived video review functionality

Motion Detection

Create motion detection windows with separate sensitivity settings and event triggers

Recording Schedule

Define a weekly recording schedule with a mixture of continuous and motion detection

recording

IPv6

IPv6 support

ONVIF

ONVIF Profile S compliant

Free Apps

See live video on a mobile device with free iOS and Android® apps

Complimentary Software

Complimentary pro-grade software to manage up to 32 TRENDnet cameras

Product Hardware Features

Camera Overview

 Power Connector: This model is designed to work on wireless or PoE. For

wireless PoE user, please connects the power adapter to camera.

 Ethernet/PoE Port: Plug the network cable to connect to supply power to the

camera if using PoE connection.

 Mounting Lock Ring: Loosen the lock ring to adjust and tighten the camera

position.

 IP66 Housing: Housing is rated with IP66.

 IR Sensor: Detect the light source.

 IR LEDs: The IR LEDs will be on when the sensor detect low light source.

 Sun Visor: Sun visor to prevent direct sun to the camera.

IR

Sensor

IR

LEDs

Sun Visor

IP66

Housing

Mounting

Lock Ring

Power

Connector

Ethernet/PoE

Port

TRENDnet User’s Guide

TV-IP322WI

5

Warnings:

 For PoE user, it is recommended to use the PoE injector or an IEEE 802.3at

compliant PoE switch.

 If the product does not work properly, please contact your dealer or the

nearest service center. Never attempt to disassemble the camera yourself.

Disassembling the product will void the warranty and may cause harm or

injury.

 The installation should be done by a qualified service person and should

conform to all construction and electric regulations and other local codes.

Cautions:

 Make sure the power supply voltage is correct before using the camera.

 Do not drop the camera or subject to physical shock.

 Do not touch sensor modules with fingers. If cleaning is necessary, use a clean

cloth with a bit of ethanol and wipe it gently. If the camera will not be used for

an extended period of time, put on the lens cap to protect the sensor from dirt.

 Do not aim the camera lens at the strong light such as the Sun or an

incandescent lamp. Strong light can damage the camera sensor.

 The sensor may be burned out by a laser beam. When any laser equipment is

being used, make sure that the surface of the sensor will not be exposed to the

laser beam.

 Do not place the camera in extremely hot, cold temperatures (the operating

temperature should be between -30°C to 65°C), dusty or damp environment,

and do not expose it to high electromagnetic radiation.

 To avoid heat accumulation, good ventilation is required for a proper operating

environment.

 While shipping, the camera should be packed in its original packing.

 Use water proof tape to cover all the wires, cables which will be exposed

outdoor after the camera installation.

There are a number of factors involved in successful camera installation. Follow the

suggested installation steps and go through the check lists. This guide will help you to

make your camera installation smooth and easy.

Plan for installation location

Setup Camera with CD

Hardware Installation

Plan for Installation

Viewing angle

The TV-IP322WI is a bullet camera with a focused viewing angle (71.6 horizontal) that

provides non-distorted and detailed images. Choose the location where has good angle

to shoot the image you expect to see. The motion detection area should also be

considered when installing the camera.

Weather Conditions

The camera is an outdoor dome camera, which fits most installations indoor and

outdoor. The camera can work under a wide range of weather conditions. For severe

weather conditions. Using the camera in milder weather conditions will help extend the

camera’s life and preserve the quality of the camera image.

Moisture: Avoid damp or moist environments whenever you can. The camera is an IP66

grade water proof camera, and it will work in moist environments. However, rain may

affect the picture quality, especially at night, water may reflect the light from the infra-

red illumination and degrade picture quality.

Temperature: Camera works within a specified temperature range. Areas with severe

temperatures should be avoided when installing the camera. It’s recommended that you

use an enclosure with a heater and blower if you plan on using this camera outside of

the specified temperature range.

TRENDnet User’s Guide

TV-IP322WI

6

Sunlight: Avoid direct sun light exposure. Direct sun light will damage the image sensor.

If sunlight is necessary for your viewing purposes, provide protection for the image

sensor.

Lighting: Consider installing your camera faces the same direction of the light sources.

Shooting images with top-down position outdoor or next to the existing light source are

good choices. Avoid the light source if it creates a shade that darkens the viewing area.

Waterproof Cap

The TV-IP312PI is IP66 weather rated camera. There is a set of network cable

waterproof cap that comes with the package. Run the network cable going through the

cap and then using crimp the tool to crimp the cable with an RJ-45 modular. Plug in the

network cable and then tighten the waterproof cap to prevent water running into the

camera through the cable.

Setup Camera with CD

The autorun supports Windows operating system and included three types of network

connection method. Select your desire connection method and follow the instruction.

 Option1: Manually Connect Camera to Wireless Network.

 Option2: Connect Cameras to a wireless Network by WPS Button

 Option3: Connect Camera by Using a Network Cable (PoE)

Option 1: Manually Connect Camera to Wireless Network

1.

Insert the Installation CD into your computer’s CD-ROM drive to initiate the Auto-Run

program. Click the Install Camera.

TRENDnet User’s Guide

TV-IP322WI

7

2.

Write down the MAC ID of the camera. Click Next.

3.

Select “

Connect camera to your wireless network manually

”.

4.

Connect a network cable to the camera’s network port and then to the router.

Connect the power adapter to the camera. The IR LEDs will turn on dime red light.

Allow 60 seconds for the camera to boot up. Click Next.

5.

Wait while searching the cameras.

TRENDnet User’s Guide

TV-IP322WI

8

6.

The founded cameras will show on the screen. The camera already selected by

default if you have only one camera installed. If you have more than one camera in

the same Network, you will need to identify the camera by the MAC ID. Click Next.

7.

Select "DHCP" option to assign an IP by DHCP server or Select "Fixed IP" to set IP

address manually. Click Next.

8.

If you select "Fixed IP", fill out the IP address, subnet mask, default gateway, DNS

server. Please ensure that the IP address of the camera and the computer must

within the same network. Click Next.

9.

Enter Password. The default password is “admin”. You must change the default

password of the camera. Enter the default password: admin and enter the new

password. The password must be between 8 and 16 characters. (Alphanumeric: a-z,

A-Z, 0-9, !, @, #, $), and confirm the new password by entering the password twice.

TRENDnet User’s Guide

TV-IP322WI

9

10.

Select your wireless network from the Available Wireless Network dropdown

menu. If you don’t see your wireless station on the list, click Rescan. Enter

Wireless Network Password, then click Next.

11. Disconnect the network cable from the camera. Then click Next.

12.

Enter “admin” on username and enter new password you just created.

13.

Click the hyperlink to access to the camera’s web page or click Next. It is

recommended that you access the IP camera now if it was using a DHCP connection.

TRENDnet User’s Guide

TV-IP322WI

10

14.

Click Finish to exit the program or click Home to return to the main screen.

This device also supports the Mobile App. Using your mobile device to scan the QR

code to install the App.

Option 2: Connect Camera to a Wireless Network by WPS

Button

1.

Insert the Installation CD into your computer’s CD-ROM drive to initiate the

Auto-Run program. Click the Install Camera.

2.

Write down the MAC ID of the camera. Click Next.

TRENDnet User’s Guide

TV-IP322WI

11

3.

Select “

Connect camera to your wireless network using Wi-Fi

Protected Setup (WPS)

”.

4.

Using the include security wrench to loosen the screws and remove the panel on

the bottom of the camera. If you plan on using an SD card, insert an SD card into

the SD card slot.

5.

Connect the power adapter to the camera. The IR LEDs will turn on dime red

light. Allow 60 seconds for the camera to boot up. Click Next.

6.

Press the WPS button on your wireless router for 5 seconds. Within 2 minutes,

press and hold the WPS button on the camera for 5 seconds.

TRENDnet User’s Guide

TV-IP322WI

12

7.

Wait while searching the cameras.

8.

The founded cameras will show on the screen. The camera already selected by

default if you have only one camera installed. If you have more than one camera

in the same Network, you will need to identify the camera by the MAC ID. Click

Next.

9.

Enter Password. The default password is “admin”. You must change the default

password of the camera. Enter the default password: admin and enter the new

password. The password must be between 8 and 16 characters. (Alphanumeric:

a-z, A-Z, 0-9, !, @, #, $), and confirm the new password by entering the password

twice.

10.

Enter “admin” on username and enter new password you just created.

TRENDnet User’s Guide

TV-IP322WI

13

11.

Click the hyperlink to access to the camera’s web page or click Next. It is

recommended that you access the IP camera now if it was using a DHCP

connection.

12.

Close the panel.

13.

Click Finish to exit the program or click Home to return to the main screen.

This device also supports the Mobile App. Using your mobile device to scan the

QR code to install the App.

TRENDnet User’s Guide

TV-IP322WI

14

Option 3: Connect Camera by Using a Network Cable (PoE)

1.

Insert the Installation CD into your computer’s CD-ROM drive to initiate the

Auto-Run program. Click the Install Camera.

2.

Write down the MAC ID of the camera. Click Next.

3.

Connect a network cable to the camera’s network port to a PoE switch. The IR

LED will be on. Allow 60 seconds for the camera to boot up. Click Next.

4.

Wait while searching the cameras.

TRENDnet User’s Guide

TV-IP322WI

15

5.

The founded cameras will show on the screen. The camera already selected by

default if you have only one camera installed. If you have more than one camera

in the same Network, you will need to identify the camera by the MAC ID. Click

Next.

6.

Select "DHCP" option to assign an IP by DHCP server or Select "Fixed IP" to set IP

address manually. Click Next.

7.

If you select "Fixed IP", fill out the IP address, subnet mask, default gateway, DNS

server. Please ensure that the IP address of the camera and the computer must

within the same network. Click Next.

8.

Enter Password. The default password is “admin”. You must change the default

password of the camera. Enter the default password: admin and enter the new

password. The password must be between 8 and 16 characters. (Alphanumeric:

a-z, A-Z, 0-9, !, @, #, $), and confirm the new password by entering the password

twice.

TRENDnet User’s Guide

TV-IP322WI

16

9.

Enter “admin” on username and enter new password you just created.

10.

Click the hyperlink to access to the camera’s web page or click Next. It is

recommended that you access the IP camera now if it was using a DHCP

connection.

11.

Click Finish to exit the program or click Home to return to the main screen.

This device also supports the Mobile App. Using your mobile device to scan the

QR code to install the App.

TRENDnet User’s Guide

TV-IP322WI

17

Install Web Browser Plug-In for Camera Management

Interface

Windows

1. Access the camera management interface.

2. Enter your username and password. Then press OK.

3. Click on the link to download the plug-in and follow the instructions to

continue the installation.

4. Click Finish.

5. Restart the browser to live view.

TRENDnet User’s Guide

TV-IP322WI

18

Mac OS X

1. Access the camera management interface.

2. Enter your username and password. Then press Login.

3. Click on the link to download the plug-in. (If you don’t have the Internet access at the

time you are seting up, please find the plug-in on the CD. Under /Mac directory.)

4. Double click on the WebComponents.pkg file and follow the instructions to proceed the

installation.

5. Click Close.

6. Restart the browser to live view.

TRENDnet User’s Guide

TV-IP322WI

19

WiFi Camera Mounting

1. For a WiFi mounting, confirm your mobile device has at least 2 bars of WiFi

connection to the WiFi Network.

2. Loosen the adjustable locking ring and and manually position the camera as desired.

3. Place the provided drill template on the wall or ceiling.

4. Drill holes for the provided screw anchors at each marked position on the template.

Make sure the drill bit matches the size of the provided screw anchors.

5. You can run your cable from back of the camera, or route it through the side of the

base. Skip to step 6 if you are doing so. Drill a hole in the wall for the cables.

6. Pass the camera’s cables through the hole.

7. Connect the power adapter to the camera’s power port.

8. Insert the provided screw anchors into the holes.

9. Align the mounting bracket with the screw anchors, and then use the provided

screws to secure the camera to the mounting surface.

10. Seal edge of camera based with exterior grade caulking.

11. Loosen the lock ring to adjust the angle and tighten it to hold the position after

adjustment.

La pagina sta caricando ...

Trendnet TV-IP322WI Manuale utente

Trendnet TV-IP322WI Manuale utente

in altre lingue

Documenti correlati

Altri documenti