Trendnet TV-IP562WI Manuale utente

Cover Page

TRENDnet User’s Guide

Table of Contents

i

Contents

Product Overview ................................................................................. 2

Package Contents ...................................................................................................... 2

Features .................................................................................................................... 2

Product Hardware Features ...................................................................................... 3

Wall mount installation............................................................................................. 4

Using the Autorun Wizard ..................................................................... 4

Option A: Wired Connection by Using a Network Cable ............................................ 5

Option B: Connect Camera to Wireless Network by WPS Button .............................. 9

Option C: Manually Connect Camera to Wireless Network ..................................... 13

Mobile Apps........................................................................................ 17

Setup Wizard (Finding IP address of the cameras) ................................ 18

Web Browser Management ................................................................. 22

Main Web User Interface ........................................................................................ 24

Setup....................................................................................................................... 26

Wizard .................................................................................................................... 26

Step 1: LAN Settings ................................................................................................ 27

Step 2: Internet Settings ......................................................................................... 27

Step 3: DDNS Settings ............................................................................................. 27

Step 4: Camera Name Settings ................................................................................ 28

Step 5: Time Settings ............................................................................................... 28

Step 6: Setup Complete........................................................................................... 29

System .................................................................................................................... 30

Admin ...................................................................................................................... 30

Time and Date ......................................................................................................... 32

Network .................................................................................................................. 33

Wireless Setup ........................................................................................................ 34

Dynamic DNS ........................................................................................................... 35

Audio/Video............................................................................................................ 36

Audio and Video ...................................................................................................... 36

Image Setup ............................................................................................................ 38

Action ..................................................................................................................... 39

Recording ................................................................................................................ 39

Video Clip ................................................................................................................ 43

Snapshot ................................................................................................................. 45

SD Management ..................................................................................................... 47

Motion Detection .................................................................................................... 48

Sound Detection ..................................................................................................... 48

Tools ....................................................................................................................... 49

System ..................................................................................................................... 49

Firmware Update .................................................................................................... 50

Advanced ................................................................................................................ 50

Device Info .............................................................................................................. 50

Log ........................................................................................................................... 51

TRENDnetVIEW Pro Software .............................................................. 52

How to setup/access the camera remotely .......................................... 53

Troubleshooting ................................................................................. 56

TRENDnet User’s Guide

TV-IP562WI

2

Product Overview

TV-IP562WI

Package Contents

 TV-IP562WI

 Multi-Language Quick Installation Guide

 CD-ROM (Utility & User’s Guide)

 Network cable (1.8m/6ft)

 Power adapter (5V DC, 1A) (1.5m / 5ft)

 Camera mounting kit

If any package contents are missing or damaged, please contact the retail store, online

retailer, or reseller/distributor that the item was purchased.

Features

The Megapixel Wireless Day/Night Network Camera, model TV-IP562WI, provides

megapixel night vision in complete darkness for up to 5 meters (16 feet). A mounting

bracket and Wireless N networking support a variety of installations. Each camera

comes with a free Apple® and Android™ mobile app and Complimentary pro-grade

software to manage up to 32 TRENDnet cameras Easy Installation

Wireless N

Wireless N network increases installation options

HD Video

Experience high definition 720p HD video quality

Night Vision

Night vision up to 5 meters (16 ft.) in complete darkness

Digital Zoom

Zoom in by a factor of four

Motion Detection Emails

Receive snapshots and video clips of motion via email

Mounting Hardware

Mounting bracket supports upside down installation

Two-Way Audio

Hear sounds from the camera (install a third party speaker for two-way audio)

Storage

Store video to a network storage device or Micro SD card (up to 32 GB sold separately)

Free Apps

See live video on a mobile device with free Apple® and Android™ apps

Complimentary Software

Complimentary pro-grade software to manage up to TRENDnet 32 cameras

TRENDnet User’s Guide

TV-IP562WI

3

Product Hardware Features

Front Panel View

 Micro SD Slot – Insert a micro SD card into this slot to store video/image data.

 Mounting Stand – Portable adjustable stand.

 IR Light Sensor – Detects the light source to turn IR on or off.

 IR LED – Built-in IR LED for night vision use.

 Camera Lens –Fixed lens. The camera adjusts automatically.

 Microphone – Built-in microphone for audio can be turned on or off.

Rear Panel View

 Power Port – Connect the included power adapter from your camera to an

available power outlet. Note: Use only the adapter that came with your

camera.

 Speaker – Insert an external active speaker.

 WPS LED – This LED indicator is solid blue when your camera is powered on. If

this LED indicator is off, there is no power to your camera. This LED indicator is

blinking green when there is connection/data to your camera.

 WPS Button – Press this button to enable WPS.

 Power/Link LED – This LED indicator is solid blue when your camera is

powered on. If this LED indicator is off, there is no power to your camera. This

LED indicator is blinking green when there is connection/data to your camera.

 Reset Button – Use an item such as a paperclip to push and hold this button

for 6 seconds and release to reset your camera to its factory defaults.

 Network Port – Connect Network cables from the camera to your route or

switch.

TRENDnet User’s Guide

TV-IP562WI

4

Wall mount installation

To wall mount the camera, please following the steps below.

 Use the pencil to mark the three holes of the plate on the wall.

 Drill the holes

 Attached the camera to the plate

 Use the supplied screws to secure the camera stand to the wall.

Using the Autorun Wizard

The Autorun supports both Windows & Mac operating systems. Insert the Installation

CD-ROM into your computer’s CD-ROM drive to initiate the Autorun program. The

Autorun Wizard program will run automatically.

For Windows users: If the autorun wizard does not run, go to the CD-ROM folder and

run Autorun.exe to start installation wizard.

For Mac users: Please click InstallWizard to start installation wizard.

1. Select your desired language for Installation. There are five languages available

– English, French, German, Spanish, and Russian.

TRENDnet User’s Guide

TV-IP562WI

5

2. Click Install Camera and follow the on-screen steps to continue the

installation.

3. Write down the MAC address of your camera. This can be found on the device

label. Click Next to continue, Back to go to the previous screen or Home to

return to the main menu. The packaging also included a sticker with the same

information.

4. The most important part of the setup process is the network connection type.

There are three options:

a. Connect the camera to your network using a network cable

b. Connect the camera to your wireless network using Wi-Fi Protected Setup

(WPS) button (Verify your router has a WPS button. If not, select the next

option).

c. Connect the camera to your wireless network manually.

Option A: Wired Connection by Using a Network Cable

1. Click Connect camera to your network using a network cable. Cick Next to

continue.

TRENDnet User’s Guide

TV-IP562WI

6

2. Connect one end of the included power adapter to the camera and the other

end to the power outlet. The Power/Link LED will be blinking. Click Next to

continue.

3. Connect one end of the network cable to your camera and the other end to

your router. Click Next to continue.

5. The wizard will search the network for your camera.

6. Select your camera. The wizard will show all cameras in the network. If there

is only one camera in the network, the wizard will automatically select it. The

wizard provides the Model Name and MAC Address of the camera. If you do

not see any of your camera(s) in the wizard, click Retry to scan the camera

again. Click Next to continue.

TRENDnet User’s Guide

TV-IP562WI

7

7. Change Password. The default username and password is admin. Tick the

Change Password checkbox to enter the new password details. The password

should be between 8 and 30 characters. Click Next to continue.

Note:

If you enter the incorrect admin details, you will be prompted to change the

configuration, as shown below.

If the password length is less than 8 characters, you will also be prompted to

alter the configuration, as shown below.

8. The wizard will configure your parameters.

TRENDnet User’s Guide

TV-IP562WI

8

9. The initial setup is complete. Click the link to navigate to the camera’s Web

User Interface for further configuration or click product image to create a

shortcut. Click Next to continue.

10. Scan the barcode to download the TRENDnetVIEW App for Apple iOS or

Android™

1

devices. The app can also be found by searching TRENDnet from the

Apple App Store or Google Play™

2

.

Please refer to the Mobile Apps section for additional app features

information.

You are now ready to use your camera. Click Finish to exit.

1

Android is a trademark of Google Inc.

2

Google Play is a trademark of Google Inc.

TRENDnet User’s Guide

TV-IP562WI

9

Option B: Connect Camera to Wireless Network by WPS

Button

1. Click Connect camera to your wireless using Wi-Fi Protected Setup (WPS)

button radio button.

Please consider these points before using WPS.

 Find the access point (AP) or wireless router you wish to connect to from

the Available AP drop down menu.

 In most cases you should leave the Channel set to Auto as the AP will

determine the channel of operation.

 Select the type of authentication and encryption required by the access

point and enter the Key required to connect.

Click Next to continue, Back to go to the previous screen or Home to return to

the Main Menu.

2. Follow the instructions on the screen to Power up the Camera. Click Next to

continue.

TRENDnet User’s Guide

TV-IP562WI

10

3. Press the WPS button on your wireless router or access point for 5 seconds.

Within 2 minutes press and hold WPS button on the IP Camera for 5 seconds.

The WPS button will be start blinking. Wait until the WPS LED turns off and

Power/Link LED turn green. It can take up to 2 minutes for the camera to

connect to the wireless router or access point. Click Next to continue. If you

wish to go to the previous screen, click Back or click Home to return to the

main menu.

4. The wizard will now search for your camera.

5. Select your camera. The wizard will show all cameras in the network. If there

is only one camera in the network, the wizard will automatically select it. The

wizard provides the Model Name and MAC Address of the camera. If you do

not see any of your camera(s) in the wizard, click Retry to scan the camera

again. Click Next to continue.

TRENDnet User’s Guide

TV-IP562WI

11

6. Change Password. The default username and password is admin. Tick the

Change Password checkbox to enter the new password details. The password

should be between 8 and 30 characters. Click Next to continue.

Note:

If you enter the incorrect admin details, you will be prompted to change the

configuration, as shown below.

If the password length is less than 8 characters, you will also be prompted to

alter the configuration, as shown below.

7. The wizard will configure your parameters.

TRENDnet User’s Guide

TV-IP562WI

12

8. The initial setup is complete. Click the link to navigate to the camera’s Web

User Interface for further configuration or click product image to create a

shortcut. Click Next to continue.

9. Scan the barcode to download the TRENDnetVIEW App for Apple iOS or

Android™

3

devices. The app can also be found by searching TRENDnet from the

Apple App Store or Google Play™

4

.

Please refer to the Mobile Apps section for additional app features

information.

You are now ready to use your camera. Click Finish to exit.

3

Android is a trademark of Google Inc.

4

Google Play is a trademark of Google Inc.

TRENDnet User’s Guide

TV-IP562WI

13

Option C: Manually Connect Camera to Wireless Network

1. Click Connect camera to your wireless network manually button

2. Follow the instructions in the next screen to Power up the Camera. Click Next

to continue.

3. Connect one end of the network cable to your camera and the other end to

your router. Click Next to continue, Back to go to the previous screen or Home

to return to the Main Menu.

4. The wizard will now search the network for your camera.

TRENDnet User’s Guide

TV-IP562WI

14

5. Select your camera. The wizard will show all cameras in the network. If there

is only one camera in the network, the wizard will automatically select it. The

wizard provides the Model Name and MAC Address of the camera. If you do

not see any of your camera(s) in the wizard, click Retry to scan the camera

again. Click Next to continue.

6. Change Password. The default username and password is admin. Tick the

Change Password checkbox to enter the new password details. The password

should be between 8 and 30 characters. Click Next to continue.

Note:

If you enter the incorrect admin details, you will be prompted to change the

configuration, as shown below.

TRENDnet User’s Guide

TV-IP562WI

15

If the password length is less than 8 characters, you will also be prompted to

alter the configuration, as shown below.

7. The wizard will now configure your parameters.

8. Once your wireless network has been discovered, the wizard will provide you

with an option to select the Available Wireless Network and also to provide a

Wireless Network Password. If you do not see your wireless network details,

click the Rescan link to scan the network again.

9. The wizard will search for wireless Access Points. Click the Rescan button if you

do not find your AP.

TRENDnet User’s Guide

TV-IP562WI

16

10. Disconnect your network cable from the camera/router. Click Next to

continue.

11. The camera will connect to the wireless network.

12. The initial setup is complete. Click the link to navigate to the camera’s Web

User Interface for further configuration or click product image to create a

shortcut. Click Next to continue.

TRENDnet User’s Guide

TV-IP562WI

17

13. Scan the barcode to download the TRENDnetVIEW App for Apple iOS or

Android™

5

devices. The app can also be found by searching TRENDnet from the

Apple App Store or Google Play™

6

.

Please refer to the Mobile Apps section for additional app features

information.

You are now ready to use your camera. Click Finish to exit.

5

Android is a trademark of Google Inc.

6

Google Play is a trademark of Google Inc.

Mobile Apps

Android Version

Using your mobile

7

device, an Android phone in this example, open the Bar Code

scanning app on your phone. Hold it up to the QR Code on the wizard that reads,

Android, and scan the image. The Bar Code app will read the QR Code and record it.

The app will copy the QR link and provides a HTML link to the TRENDnetVIEW app. You

will be directed to the Google Play™ Storefront to download the app. Download the

app, install it and use the app on your mobile device to view the TRENDnet camera.

7

Please use the Quick Installation Guide to install the mobile applications or learn how

to use mobile accessibility.

TRENDnet User’s Guide

TV-IP562WI

18

Apple iOS version

Scan the QR Code using one of IOS’s QR Code apps. The app will automatically create an

HTML link to the iTunes App Store. You will be immediately directed to the iTunes App

Store. Click the link to download.

Setup Wizard (Finding IP address of the cameras)

To locate the IP address of your camera(s) on the same network with your PC, please

install the Setup Wizard utility (for Windows only) from the SetupWizard folder .

1. Insert the included CD-ROM into your CD/DVD drive, browse to the CD drive of

the SetupWizard folder and run SetupWizardSetup_1.2.3.4804.msi to begin

the installation wizard.

2. The following screen will show up. Click Next and following the screen to

finish the installation.

3. Click Close to finish the installation.

TRENDnet User’s Guide

TV-IP562WI

19

4. Click Start > Programs > TRENDnet > SetupWizard > SetupWizard. The

TRENDnet Setup Wizard appears.

5. Connect an RJ-45 cable from a switch/router to the Ethernet port on the back

of the camera and connect the AC power adapter to the camera. Click Next to

proceed.

6. From the list of cameras that appears, select the camera and click Next to

continue. If your camera is not listed, please ensure your camera is powered

on and connected to the network then click Re-Scan to scan the camera from

your network.

7. Login to your camera by entering the ID and Password. By default, both the ID

and Password are set to admin. Click Next to continue.

8. It is strongly recommended that you change your password to secure the

camera from being accessed by others. Check the Change Password box and

enter the new password in both password fields to confirm the new password.

Click Next to continue.

La pagina si sta caricando...

Trendnet TV-IP562WI Manuale utente

Trendnet TV-IP562WI Manuale utente

in altre lingue

Documenti correlati

Altri documenti