Quickie Quickie IRIS Manuale del proprietario

Owner’s Manual



Quickie

®

IRIS



Zippie

®

IRIS



SE



Folding



With transit



Without transit

Supplier:

This manual must be given to the user of this wheelchair.

User:

Before using this wheelchair read this entire manual and save for future

reference.

SECTION

ENGLISH

IRIS

Manual de Instrucciones

Distribuidor:

Este manual debe ser entregado al pasajero de esta silla de ruedas.

Pasajero:

Antes de usar esta silla de ruedas, lea este manual en su totalidad y

guárdelo para futura referencia.

Cada una de las sillas se envía con un manual de instrucciones en inglés. El manual en español o

francés está disponible en formato PDF en nuestra página en Internet: www.SunriseMedical.com.

Ingrese a la página del producto específico para descargar el manual, o comuníquese con el

proveedor autorizado de Sunrise Medical.

Mode d’emploi

Fournisseur:

Ce manuel doit être remis à l’utilisateur / utilisatrice de ce fauteuil

roulant.

Utilisateur / Utilisatrice:

Avant d’utiliser ce fauteuil roulant, lisez entièrement ce

manuel et conservez le pour le consulter ultérieurement.

Chaque fauteuil est livré avec un manuel d’instructions en anglais. Les versions en espagnol et en

francais sont à ançais est à votre disposition en format PDF sur le site:

www.SunriseMedical.com. Veuillez vous rendre à la page de votre produit pour télécharger le

manuel dans la langue souhaitée, ou contactez un fournisseur agréé Sunrise Medical.

Benutzeranweisungen

Fachhändler :

Dieses Handbuch muss dem Benutzer des Rollstuhls ausge-

händigt werden.

Benutzer :

Vor dem Gebrauch des Rollstuhls lesen Sie bitte das gesamte

Handbuch, und bewahren Sie es für zukünftigen Bedarf auf.

Zum Lieferumfang jedes Rollstuhls gehört ein Bedienungshandbuch in englischer Sprache. Diese

übersetzte Version des Handbuchs steht im PDF-Format auf unserer Website zur Verfügung:

www.SunriseMedical.com. Gehen Sie bitte zu der betreffenden Produktsite für den Download

der übersetzten Version oder wenden Sie sich an Ihren authorisierten Sunrise Medical

Fachhändler.

Manuale d'uso

Rivenditore :

Il presente manuale va consegnato all'utente della carrozzina.

Utente :

Prima di usare la carrozzina, leggere il presente manuale per intero

e conservarlo per riferimento futuro.

Ogni carrozzina è accompagnata da un manuale d’uso scritto in inglese. La versione tradotta è

reperibile nel formato PDF sul nostro sito web: www.SunriseMedical.com. Visitare la pagina del

prodotto specifico da scaricare, o contattare il fornitore Sunrise Medical autorizzato.

ENGLISH

I. INTRODUCTION

SUNRISE MEDICAL LISTENS

Thank you for choosing a Quickie/Zippie IRIS 7iltin6pace :heelchair.

We want to hear your questions or comments about this manual, the

safety and reliability of your chair, and the service you receive from

your Sunrise supplier. Please feel free to write or call us at the

address and telephone number below:

6

815,6(0(',&$/86//&

Customer Service Department

2842 Business Park Avenue

Fresno, CA 93727

(800) 333-4000

Be sure to return your warranty card, and let us know if you change

your address. This will allow us to keep you up to date with informa-

tion about safety, new products and options to increase your use and

enjoyment of the wheelchair. If you lose your warranty card, call or

write and we will gladly send you a new one

.

FOR ANSWERS TO YOUR QUESTIONS

Your authorized supplier knows your wheelchair best, and can answer

most of your questions about chair safety, use and mainte-nance. For

future reference, fill in the following:

Supplier:

___________________________________________________________________________

Address: ___________________________________________________________________________

______________________________________________________________________________________

Telephone:________________________________________________________________________

Serial #:_____________________________ Date/Purchased: ________________________

ADDITIONAL INFORMATION YOU SHOULD KNOW

No component of this chair was made with Natural Rubber Latex.

DISPOSAL AND RECYCLING INFORMATION

When this product reaches the end of its life, please take it to an

approved collection or recycling point designated by your local or

state government. This wheelchair is manufactured using a variety of

materials, Your product should not be disposed of as ordinary

household waste. You should dispose of your wheelchair properly,

according to local laws and regulations. Most materials that are used

in the construction of this product are fully recyclable. The separate

collection and recycling of your product at the time of disposal will

help conserve natural resources and ensure that it is disposed in a

manner that protects the environment.

Ensure you are the legal owner of the product prior to arranging for

the product disposal in accordance with the above recommendations.

MK-100151 Rev. D

2

ENGLISH

II. TABLE OF CONTENTS

I. INTRODUCTION ...........................................................................2

II. TABLE OF CONTENTS.................................................................3

III. YOUR CHAIR AND ITS PARTS..................................................4

IV. NOTICE– READ BEFORE USE ....................................................4

V. GENERAL WARNINGS .......................

..........................................5

A.Weight limits ...............................................................................5

B. Intended Use...............................................................................5

C. Attendants and Caregivers .....................................................5

D. Accessories.................................................................................5

E. Know your Chair .......................................................................5

F.

Reduce the risk of an Accident...............................................5

G.Safety Checklist...........................................................................5

H.Changes and Adjustments ........................................................5

I. Environmental Conditions........................................................6

J. Terrain ..........................................................................................6

K.Street Use ...................................................................................6

L. Motor Vehicle Safety .................................................................6

M.When you need help.................................................................6

V

I. SAFETY WARNINGS: FALLS & TIP-OVERS.............................7

A.Center of Balance.......................................................................7

B. Dressing or Changing Clothes ................................................7

C.Obstacles......................................................................................7

D.Front Caster Lift.........................................................................7

E.

Reaching or Leaning...................................................................7

F. Moving Backward........................................................................7

G.Escalators......................................................................................8

H. Ramps, Slopes, and Sidehills....................................................8

I. Transfer.........................................................................................8

J. Curbs and Single Steps...............................................................9

K.Climbing a Curb or Single Step...............................................9

L. Descending a Curb or Single Step .......................................10

M.Stairs............................................................................................10

N. Climbing Stairs.........................................................................10

O. Descending Stairs ...................................................................10

P. Tilt Use and Back Angle Adjustment (Mono Back).........10

V

II. WARNINGS: COMPONENTS & OPTIONS..........................11

A.Anti-tip Tubes ...........................................................................11

B. Armrests.....................................................................................11

C.Push Handles .............................................................................11

D.Stroller Handle..........................................................................11

E. Cushions.....................................................................................11

F.

Fasteners ....................................................................................11

G. Footrests...................................................................................11

H. Pneumatic Tires........................................................................11

I. Positioning Belts .......................................................................12

J. Quick Release Axle .................................................................12

K.Rear Axles..................................................................................12

L. Rear Wheel Locks ...................................................................12

M. Modified Seat Systems...........................................................12

N. Tray for vent and battery .....................................................12

O. Accessory Hook .....................................................................12

V

III. USE AND MAINTENANCE ......................................................13

A. Introduction ............................................................................13

B. Critical Maintenance Tips.......................................................13

C.Maintenance Chart...................................................................13

D.Cleaning......................................................................................13

E. Troubleshooting Chart...........................................................13

F. To Mount and Remove Rear Wheels.................................14

G.Cushion Installation .................................................................14

H. Wheel Locks............................................................................14

I. Hub Lock....................................................................................14

J. Anti-Tip Tubes-Rear.................................................................14

K. Dual-Post Armrests ................................................................15

L. Height-Adjustable Armrests..................................................15

M.Adjustable Locking Flip-up Armrests ..................................15

N.Cantilever Armrests................................................................16

O.Swing-away Hangers/Footrests.............................................16

P. Heavy-duty, Lift-off Footrests ...............................................16

Q.Articulating Legrest .................................................................16

R. Elevating Legrest.......................................................................17

S.

Z-Finity

™

Footrest System......................................................17

T. Z-Finity

™

Swing-away Footrest.............................................17

U.Tilt-in-Space Mechanism.........................................................18

V. Stroller Handle Extension......................................................18

W.Reclining Back ..........................................................................18

X.Mono Back Stroller handle ....................................................19

Y. Folding the Mono back for Transport ................................19

Z. Folding/Unfolding frame.........................................................19

AA.I.......................................................................................19

IX. DEALER SERVICE & ADJUSTMENT.........................................20

A.Dealer Service Introduction ..................................................20

B. Critical Maintenance Tips.......................................................20

C.Cleaning......................................................................................20

D.Rear Axle ...................................................................................20

E. Hub Lock Adjustment.............................................................21

F. Wheel Locks .............................................................................21

G.Single-Post Armrest Receiver ...............................................21

H.Adjustable Locking Flip-up Armrests ..................................22

I. Cantilever Locking Flip-back armrests................................22

J. Swing-Away Height Adjustment...........................................23

L. Heavy-Duty Lift-Off Footrest................................................23

M. Articulating Legrest..................................................................23

N.Elevating Legrest.......................................................................23

O.Contracture Footrest .............................................................24

P. Z-Finity

™

Footrest System......................................................24

Q.Limb Support ............................................................................25

R. Tilt-in-Space Mechanism..........................................................25

T. Mono Back.................................................................................26

U.. Dynamic Mono Back................................................................27

V. Dynamic Mono Back Elastomer Replacement ..................27

W. Ventilator Hanger Bracket ...................................................28

X.Fixed Stroller Handle ..............................................................28

Y. Adjustable Stroller Handle (Mono Back) ..........................28

Z.Caster/Fork Assembly.............................................................29

AA.Frame Depth ..........................................................................29

BB.XLOCK™ Width Adjustment ...........................................30

CC.Frame Width...........................................................................30

DD.Seat Pan....................................................................................31

EE.

Removable Seat Pan...............................................................31

GG. Attendant Wheel Lock Installation...........

.....................

.33

HH.Footplate Adapter Bracket ................................................34

II.Lap Belt Instructions................................................................35

JJ.Inspect.......................................................................................35

X

. SUNRISE LIMITED WARRANTY ..........................................

....36

FF.

Carriage .....................................................................................32

K.Angle Adjustable Footplate ...................................................23

S. Standard Backrest ....................................................................25

3

MK-100151 Rev. D

ENGLISH

III. YOUR CHAIR AND ITS PARTS

IV. NOTICE– READ BEFORE USE

A.

CHOOSE THE RIGHT CHAIR & SAFETY OPTIONS

Sunrise provides a choice of many wheelchair styles to meet your needs. This

product is intended for single person use only. Final selection of the type of

wheelchair, options and adjustments rests solely with you and your health

care professional. Choosing the best chair and set-up for your safety depends

on such things as:

1. Your disability, strength, balance and coordination.

2. The types of hazards you must overcome in daily use (where you

live and work, and other places you are likely to use your chair).

3. The need for options that will improve your positioning, safety and

comfort (such as anti-tip tubes, positioning belts, or special seating

systems).

B. REVIEW THIS MANUAL OFTEN

Before using this chair you, and each person who may assist you, should

read this entire manual and make sure to follow all instructions. Review

the warnings often, until they are second nature to you.

C. WARNINGS

The word

“WARNING”

refers to a hazard or unsafe practice that may

cause

severe injury or death

to you or to other persons. The “Warnings”

are in Three main sections, as follows:

1

. V– GENERAL WARNINGS

Here you will find a safety checklist and a summary of risks you

need to be aware of before you ride this chair.

2. VI– SAFETY WARNINGS: FALLS & TIP-OVERS

Here you will learnabout practices for the safe use of your chair,

and how to avoid a fall or tip-over while you perform daily activi-

ties in your chair.

3. VII– WARNINGS– COMPONENTS & OPTIONS

Here you will learn about the components of your chair and options

you can select for safety. Consult your Premium Retailer and your

health care advisor to help you choose the best set-up and options

for safe use.

NOTE–

Where they apply, you will also find “Warnings” in other sections

of this manual. Heed all warnings in this section. If you fail to do

so a fall, tip-over or loss of control may occur and cause severe

injury to the rider or others.

1. Headrest

2. Push Handle/Back Cane

3. Armrest

4. Footrest Hanger

5. Footplate

6. Carriage

7. Caster fork

8. Caster tire

9. Wheel Lock

10. 12" Rear wheel

11. Anti-tip

12. Adjustable seat pan

13. Tilt-in-space mechanism release lever

NOTE– Not all options are available on both

the Quickie and Zippie IRIS.

Please refer to the order form for

specific option availability.

QUICKIE IRIS

1

2

3

4

5

6

7

8

9

13

12

11

10

MK-100151 Rev. D

4

ENGLISH

V. GENERAL WARNINGS

A. WEIGHT LIMITS

WARNING

NEVER exceed the weight limit specified by Sunrise Medical. The weight

capacity provided by your manufacturer is for the combined weight of a

rider and items carried using on-board storage. If you do exceed the weight

limit, damage to your chair, a fall, tip-over or loss of control may occur and

cause severe injury to the rider or others.

Weight Capacities

- 300lbs/(136kg).

400lbs/(181kg).

Quickie IRIS

Quickie IRIS HD

-

WARNING

DO NOT use this device for purposes other than what is intended by the

manufacturer

1. The wheelchiar is not designed for weight training and is unsafe for

use as a seat while weight training. Weight training from the wheel-

chair substantially changes the stability of the chair and may cause

tipping.

2. DO NOT stand on the frame of the wheelchair.

3. NEVER allow someone to stand on your chair or use it as a step

ladder.

4. This chair is designed for a single rider only.

5. Unauthorized modifications and use of parts or accessories not sup-

plied or approved by Sunrise Medical may change the chair struc-

ture. This will void the warranty and may cause a safety hazard. If

the warning is ignored, damage to your chair, and the potential

severe injury of the person using the chair for unintended purposes

can occur.

C. ATTENDANTS AND CAREGIVERS

WARNING

Before you assist a rider, be sure to read all warnings contained in this

manual, and follow all instructions that apply. Be aware that after consulting

a healthcare advisor, you will need to learn safe and proven body mechan-

ics to use and create assistive methods best suited to your abilities.

D. ACCESSORIES

WARNING

Unauthorized modifications or use of parts, or accessories not supplied or

approved by Sunrise Medical may change the chair structure. This will void

the warranty and may cause a safety hazard.

Some problems that may occur, but are not limited to:

1. Incorrect Wheels and/or tires that put the rider at risk of a fall or

tip-over.

2. Adding a component to the frame, changing the structural integrity of

the chair.

3. Any modification or disassembly can potentially create an unsafe situ-

ation where rider and/or attendant are put at risk.

E. KNOW YOUR CHAIR

WARNING

Every wheelchair is different. Take the time to learn the feel of this chair

before you begin riding. Start slowly, with easy, smooth strokes. If you are

used to a different chair, you may use too much force and tip over. If you

use too much force, damage to your chair, a fall, tip-over or loss of control

may occur and cause severe injury to the rider or others.

F. REDUCE THE RISK OF AN A

CCIDENT

WARNING

1. BEFORE riding, you should be trained in the safe use of this chair by

your health care advisor.

2. Practice bending, reaching and transfers until you know the limit of

your ability. Have someone help you until you know what can cause

a fall or tip-over and how to avoid doing so.

3. Be aware that you must develop your own methods for safe use

best suited to your level of function and ability.

4. NEVER try a new maneuver on your own until you are sure you

can do it safely.

5. Get to know the areas where you plan to use your chair. Look for

hazards and learn how to avoid them.

6. Sunrise recommends using anti-tip tubes in evey circumstance.

If you fail to heed these warnings, damage to your chair, a fall, tip-over or

loss of control may occur and cause severe injury to the rider or others.

G. SAFETY CHECKLIST

WARNING

Before Each Use Of Your Chair:

1. Make sure the chair rolls easily and that all parts work smoothly.

Check for noise, vibration, or a change in ease of use. (They may

indicate low tire pressure, loose fasteners, or damage to your

chair).

2. Immediately repair any problem. Your authorized supplier can help

you find and correct the problem.

3. Check to see that both quick-release rear axles are locked. When

locked, the axle button will “pop out” fully. If not locked, the wheel

may come off and cause you to fall.

4. If your chair has anti-tip tubes, lock them in place.

If you fail to heed these warnings, damage to your chair, a fall, tip-over or

loss of control may occur and cause severe injury to the rider or others.

H. CHANGES & ADJUSTMENTS

WARNING

1. If you modify or adjust this chair, it may increase the risk of a tip-

over UNLESS you make other adjustments as well.

2. Consult your authorized supplier BEFORE you modify or adjust

your chair.

3. We recommend that you use anti-tip tubes until you adapt to the

change, and are sure you are not at risk to tip over.

4. Unauthorized modifications by the end-user, dealer or any other

individual, including the use of parts not supplied or approved by

Sunrise may change the chair structure. This will void the

warranty and may cause a safety hazard.

If you fail to heed these warnings, damage to your chair, a fall, tip-over or

loss of control may occur and cause severe injury to the rider or others.

Quickie IRIS with Z-Finity

™

Footrest - 165lbs/(75kg).

Zippie IRIS

-

225lbs/(102kg).

Zippie IRIS with Z-Finity

™

Footrest - 165lbs/(75kg).

B. INTENDED USE

The Quickie and Zippie IRIS Series of wheelchair's intended use is to pro-

vide mobility to persons limited to a sitting position.

5

MK-100151 Rev. D

WARNING

If your chair is

N

OT

equipped with the Transit Option:

1. NEVER let anyone sit in this chair while in a moving vehicle.

a. ALWAYS move the rider to an approved vehicle seat.

b. ALWAYS secure the rider with proper motor vehicle restraints.

2. In an accident or sudden stop the rider may be thrown from the

chair. Wheelchair seat belts will not prevent this, and further injury

may result from the belts or straps.

3. NEVER transport this chair in the front seat of a vehicle. It may shift

and interfere with the driver.

4. ALWAYS secure this chair so that it cannot roll or shift.

5. Do not use any chair that has been involved in a motor vehicle acci-

dent. The frame and/or components may have been changed due to

the accident. Such items could be, but are not limited to: bent, loos-

ened, and/or broken components that were subjected to an impact.

I. ENVIRONMENTAL CONDITIONS

WARNING

1. Use extra care if you must ride your chair on a

wet or slick surface. If you are in doubt, ask for

help.

2. Contact with water or excess moisture may cause your chair to

rust or corrode. Avoid all extreme weather situations if possible.

a. Do not use your chair in a shower, pool or other body of

water. The chair tubing and parts are not water-tight and may

rust or corrode from the inside.

b. Avoid excess moisture (for example, do not leave your chair in

a damp bathroom while taking a shower).

c. Dry your chair as soon as you can if it gets wet, or if you use

water to clean it.

J. TERRAIN

WARNING

1. Based on ANSI/RESNA testing, Sunrise Medical recommends the

use of a caster wheel with a minimum diameter of 5”, if the wheel-

chair will be overcoming obstacles up to 1/2” on a regular basis.

2. Your chair is designed for use on firm, even surfaces such as con-

crete, asphalt, indoor flooring, and carpets.

3. Do not operate your chair in sand, loose soil, or over rocky terrain.

4. If you use your chair on terrain that is rougher than described

above there is a danger that screws and bolts will loosen prema-

turely, and that damage to wheels or axles could put the rider at

risk of a fall, tip-over, or loss of control.

If you fail to heed these warnings, damage to your chair, a fall, tip-over or

loss of control may occur and cause severe injury to the rider or others.

WARNING

1. This product is not intended for street use.

K. STREET USE

2. Avoid streets whenever possible.

3. Obey and follow all legal pedestrian pathways, and laws that apply to

pedestrians.

4. Be alert to the danger of motor vehicles in parking lots, or if you

must cross a road.

If you fail to heed these warnings, damage to your chair, a fall, tip-over or

loss of control may occur and cause severe injury to the rider or others

L. MOTOR VEHICLE SAFETY

If possible and feasible, the rider should transfer to the Original Equipment

Manufacturer vehicle seat and use the OEM vehicle restraint.

Sunrise Medical does provide a WC-19 Wheelchair Tie-Down and

Occupant Restraint System, otherwise called a Transit Option. To Identify

whether your wheelchair has been manufactured with the Transit Option

installed, look for four points of securement. Two Front points (A), and

two rear points (B). These points are recognized by the securement point

decal which can be found on or near the securement points. If your

wheelchair is equipped with the Transit Option please review the Transit

Securement supplement that was provided with the wheelchair for addi-

tional information and instructions. You can request a copy from your

authorized supplier, or Sunrise medical at 1-800-333-4000 if you don’t have

it.

21

V. GENERAL WARNINGS

ENGLISH

Front Transit hook

1

Rear Transit hook

2

A

B

Look for this symbol on your wheelchair. It indicates wheel-

chair securement points which conform to ANSI/RESNA (1998)

V.1 - Section 19 and/or ANSI/RESNA (2012) V.4 WC-19. For

more Transit related information, see the “Transit Securement

Supplement” included with your chair.

M. WHEN YOU NEED HELP

WARNING

For The Rider:

Make sure that each person who helps you reads and fol-

lows all warnings and instructions that apply.

For Attendants:

1. Work with the rider’s doctor, nurse or therapist to learn safe meth-

ods best suited to your abilities and those of the rider.

2. Tell the rider what you plan to do, and explain what you expect the

rider to do. This will put the rider at ease and reduce the risk of an

accident.

3. Make sure the chair has push handles. They provide secure points

for you to hold the rear of the chair to prevent a fall or tip-over.

Check to make sure push handle grips will not rotate or slip off.

4. To prevent injury to your back, use good posture and proper body

mechanics. When you lift or support the rider or tilt the chair, bend

your knees slightly and keep your back as upright and straight as you

can.

5. Remind the rider to lean back when you tilt the chair backward.

6. When you descend a curb or single step, slowly lower the chair in

one easy movement. Do not let the chair drop the last few inches

to the ground. This may damage the chair or injure the rider.

7. To avoid tipping, or getting hung up on objects, unlock and rotate

anti-tip tubes up, and out of the way.

8. Whenever you aren’t attending the wheelchiar, ALWAYS use the

wheel-lock to secure the rear wheels, and lock anti-tip tubes in

place if you must leave the rider alone, even for a moment. This will

reduce the risk of a tip over or loss of control of the chair.

If you fail to heed these warnings, damage to your chair, a fall, tip-over or

loss of control may occur and cause severe injury to the rider or others.

MK-100151 Rev. D

6

VI. SAFETY WARNINGS: FALLS & TIP-OVERS

6. If your chair has anti-tip tubes, do not go over an obstacle without

help.

7. Keep both of your hands on the handrims as you go over an obsta-

cle.

8. Never push or pull on an object (such as furniture or a doorjamb)

to propel your chair.

If you fail to heed these warnings, damage to your chair, a fall, tip-over or

loss of control may occur and cause severe injury to the rider or others.

D. FRONT CASTER LIFT

WARNING

Front caster lift can occur when the front wheels, ordinarily in contact

with the ground, are either intentionally, or unintentionally caused to lift

from the ground while the rear wheels remain in contact. Pitch control

(partial or full) should

N

EVER

be attempted without consulting your

healthcare advisor and making sure that anti-tips are installed.

If you fail to heed this warning, you are at a high risk of damage to your

chair, a fall, tip-over or loss of control that may occur and cause severe

injury to the rider or others.

E. REACHING OR LEANING

WARNING

If you reach or lean it will affect the center of balance of your chair. This

may cause you to fall or tip over. When in doubt, ask for help or use a

device to extend your reach.

1.

N

EVER

reach or lean if you must shift your weight sideways or rise up

off the seat.

2.

NEVER

reach or lean if you must move forward in your seat to do

so. Always keep your buttocks in contact with the backrest.

3.

NEVER

reach with both hands (you may not be able to catch your-

self to prevent a fall if the chair tips).

4.

NEVER

reach or lean to the rear unless your chair has anti-tip

tubes locked in place.

5.

DO NOT

reach or lean over the top of the seat back. This may

damage one or both backrest tubes and cause you to fall.

6. If You Must Reach Or Lean:

a. Do not lock the rear wheels. This creates a tip point and

makes a fall or tip-over more likely.

b. Do not put pressure on the footrests.

c. Move your chair as close as you can to the object you wish to

reach, then back up alongside it. Backing up will rotate the

casters forward.

d. Do not try to pick up an object from the floor by reaching

down between your knees. You are less likely to tip if you

reach to the side of your chair.

e. Rotate the front casters until they are as far forward as possi-

ble. This makes the chair more stable.

f. Firmly grasp a rear wheel or an armrest with one hand. This

will help to prevent a fall if the chair tips.

If you fail to heed these warnings, damage to your chair, a fall, tip-over or

loss of control may occur and cause severe injury to the rider or others.

F. MOVING BACKWARD

WARNING

Use extra care when you move your chair backward. Your chair is most

stable when you propel yourself forward. You may lose control or tip over

if one of the rear wheels hits an object and stops rolling.

1. Propel your chair slowly and smoothly.

2. If your chair has anti-tip tubes, make sure to lock them in place.

3. Stop often and check to be sure your path is clear.

If you fail to heed these warnings, damage to your chair, a fall, tip-over or

loss of control may occur and cause severe injury to the rider or others.

A. CENTER OF BALANCE

WARNING

The point where this chair will tip forward, back, or to the side depends on

its center of gravity and stability. How your chair is set up, the options you

select and the changes you make may affect the risk of a fall or tip-over.

1.

The Most Important Adjustment is:

a. The position of the rear wheels. The more you move the rear

wheels forward, the more likely your chair will tip over back-

ward.

b. The position of the carriage.

2.

The Center of Balance is also Affected by:

a. A change in the set-up of your chair, including:

• The seat height and seat angle.

• Backrest angle.

b. A change in your body position, posture or weight distribution.

c. Riding your chair on a ramp or slope.

d. The use of a back pack or other options, and the location and

amount of added weight can change the balance of your chair,

3.

To Reduce The Risk Of An Accident:

a. Consult your doctor, nurse or therapist to find out what axle

and caster position is best for you.

b. Consult your authorized dealer, BEFORE you modify or adjust

this chair. Be aware that you may need to make other changes

to correct the center of balance.

c. Have someone help you until you know the balance points of

your chair and how to avoid a tip-over.

d. Use anti-tip tubes.

If you fail to heed these warnings, damage to your chair, a fall, tip-over or

loss of control may occur and cause severe injury to the rider or others.

B. DRESSING OR CHANGING CLOTHES

WARNING

Your weight may shift if you dress or change clothes while seated in chair.

To reduce the risk of a fall or tip-over:

1. Rotate the front casters until they are as far forward as possible.

This makes the chair more stable.

2. Lock anti-tip tubes in place. (If your chair does not have anti-tip

tubes, back it up against a wall and lock both rear wheels).

If you fail to heed these warnings, damage to your chair, a fall, tip-over or

loss of control may occur and cause severe injury to the rider or others.

C. OBSTACLES

WARNING

Riding over curbs or obstacles can cause tipping and serious bodily harm.

If you have any doubt that you can safely cross any curb or obstacle,

ALWAYS ASK FOR HELP. Be aware of your riding skills and personal lim-

itations. Develop new skills only with the help of a companion.

T

o avoid the risk of traversing obstacles:

1. Keep a lookout for danger – scan the area well ahead of your chair

as you ride.

2. Make sure the floor areas where you live and work are level and free

of obstacles.

3. Remove or cover threshold strips between rooms.

4. Install a ramp at entry or exit doors. Make sure there is not a drop

off at the bottom of the ramp.

5. To Help Correct Your Center Of Balance:

a. Lean your upper body FORWARD slightly as you go UP over

an obstacle.

b. Press your upper body BACKWARD as you go DOWN from

a higher to a lower level.

ENGLISH

7

MK-100151 Rev. D

ENGLISH

VI. SAFETY WARNINGS: FALLS & TIP-OVERS

G. ESCALATORS

WARNING

NEVER

use this chair on an escalator, even with an attendant. If you do, a fall or tip-over is likely.

If you fail to heed these warnings, damage to your chair, a fall, tip-over or loss of control may occur and

cause severe injury to the rider or others.

H. RAMPS, SLOPES & SIDEHILLS

WARNING

Whenever possible, avoid riding on a slope, which includes a ramp or sidehill. This will change the cen-

ter of balance of your chair. Your chair is less stable and more difficult to manuever. when it is at an

angle. When moving up a hill, anti-tip tubes may not prevent a fall or tip-over.

 D

O NOT

use your chair on a slope steeper than .

 ALWAYS

go as straight up and as straight down as you can. (Do not “cut the corner” on a slope

or ramp.)

 D

O NOT

turn or change direction on a slope.

 When you have to use a ramp, always stay in the CENTER of the ramp. Make sure ramp is wide

enough that you have no risk of going off the edge.

 DO NOT

stop on a steep slope. If you stop, you may lose control of your chair.

 NEVER

use rear wheel locks to try to slow or stop your chair. This is likely to cause your chair

to veer out of control.

 ALWAYS

be aware of:

D Wet or slippery surfaces.

E A change in grade on a slope (or a lip, bump or depression). These may cause a fall or tip-

over.

F A drop-off at the bottom of a slope or ramp. A drop-off as small as 3/4 inch can stop a

front caster and cause the chair to tip forward.

 To Reduce The Risk Of A Fall Or Tip-Over:

a. Lean or press your body UPHILL. This will help adjust for the change in the center of bal-

ance caused by the slope or sidehill.

b. Keep pressure on the handrims to control your speed on a down slope. If you go too fast

you may lose control.

c.

ASK FOR HELP

any time you are in doubt.

9. Ramps At Home & Work– For your safety, ramps at home and work must meet all legal

requirements for your area:

a.

AVOID A DROP-OFF

Make sure there is a section at the top or bottom to smooth out the transition.

b.

ALWAYS

stay in the center of the ramp and control your speed.

If you fail to heed these warnings damage to your chair, a fall, tip-over or loss of control may occur and

can possibly cause severe injury to the rider or others.

I. TRANSFER

WARNING

It is dangerous to transfer on your own. It requires good balance and agility. Be aware that there is a

point during every transfer when the wheelchair seat is not below you. To Avoid A Fall:

1. Work with your health care advisor to learn safe transfer methods

a. Learn how to position your body and how to support yourself during a transfer.

b. Have someone help you until you know how to do a safe transfer on your own.

2. Lock the rear wheels before you transfer.

3. Be aware that the chair can still slide and/or tip. The wheel lock keeps the rear wheels from

rolling while you are perforrming the transfer.

4. Make sure that the pneumatic tires are properly inflated. Low tire pressure may allow the rear

wheel locks to slip. (see table in Section G “Pneumatic Tires”

5. Move your chair as close as you can to the seat you are transferring to.

6543

87

3

4

5

6

IF you need to go up a hill:

a. The Upslope should be less than 6°.

b. ALWAYS Go Straight up.

c. DON’T STOP.

d. NEVER turn on a hill.

e. ALWAYS lean forward.

IF you need to traverse a Sidehill:

a. The sidehill must be Less than 6° or you

are at risk of a tip over.

b. DON’T STOP.

c. NEVER turn on a hill.

If you need to traverse a Ramp:

a. Go Slowly.

b. Watch out for Drop-offs.

c. ALWAYS go straight up or straight down.

d. Stay centered on the Ramp.

IF you need to go down a hill:

a. The Downslope should be less than 6°.

b. GO SLOW Control your speed.

c. ALWAYS Go Straight down.

d. Never turn on a hill.

e. ALWAYS lean backward.

MK-100151 Rev. D

8

ENGLISH

J. CURBS & SINGLE STEPS

WARNING

Before riding over curbs, or negotiating even a single step, ALWAYS ask for assistance first. Curbs and steps

can cause tipping and serious bodily harm. When in doubt as to our ability to avoid, or traverse any obsta-

cle, ALWAYS ask for help. Be aware of your riding skills and personal limitations, develop new skills only

with the help of a companion.

For Attendant:

Each person who assists the rider with curbs and steps should read and follow all instruc-

tions and warnings pertaining to attendants, and caregivers.

1. Do not try to climb a high curb or step (more than 4 inches high) UNLESS you have help. Doing so may

cause your chair to exceed its balance point and tip over.

2. With the help of an attendant, go straight up and straight down a curb or step. If you climb or

descend at an angle, a fall or tip-over is likely.

3. Be aware that the impact of dropping down from a curb or step can damage your chair or loosen fas-

teners.

If you fail to heed these warnings damage to your chair, a fall, tip-over or loss of control may occur and can

possibly cause severe injury to the rider or others.

K. CLIMBING A CURB OR SINGLE STEP

For Attendant: follow these steps to help the rider climb a curb or single step moving BACKWARD:

1. Stay behind the chair.

2. Continue backward until the rear wheels contact the face of the curb or step. Lift and roll the rear

wheels to the top of the curb.

3. Pull the chair backwards until the caster wheels have cleared the edge of the curb and return the chair

to it’s rolling position.

If you fail to heed these warnings damage to your chair, a fall, tip-over or loss of control may occur and

cause severe injury to the rider or others.

9

VI. SAFETY WARNINGS: FALLS & TIP-OVERS

9

If possible, use a transfer board.

6. Rotate the front casters until they are as far forward as possible.

7. If you can, remove the footrests, or swing them out of the way.

a. Make sure your feet do not catch in the space between the footrests.

b. Avoid putting weight on the footrests as this may cause the chair to tip.

8. Make sure armrests are removed, or out of the way and do not interfere with the transfer.

9. Transfer as far back onto the seat surface as you can. This will reduce the risk that the chair will

tip or move away from you.

If you fail to heed these warnings, damage to your chair, a fall, tip-over or loss of control may occur and

cause severe injury to the rider or others.

7

Optimum Transfer position

Before transferring:

1. Flip-back or remove the armrests.

2. Swing-away or remove the footrests.

3. Make sure the wheel lock is set.

GET READY

TRANSFER

ADJUST

8

1.

2.

3.

WARNING

9

MK-100151 Rev. D

L. DESCENDING A CURB OR SINGLE STEP

WARNING

For Attendant::

Follow these steps to help a rider descend a curb or single step going FORWARD:

1. Stay at the rear of the chair.

2. Several feet before your reach the edge of the curb or step, tip the chair slightly and pull it backward.

3. When the chair is at it’s balance point, carefully step forwards until the rear wheels reach the edge of

the curb or step. Then allow the rear wheels to slowly roll down onto the lower level.

4. Push the chair forward until you are standing on the lower level.

5. When the rear wheels are safely on the lower level, tilt the chair back to its balance point.

If you fail to heed these warnings damage to your chair, a fall, tip-over or loss of control may occur and

cause severe injury to the rider or others.

M. STAIRS

WARNING

1. NEVER use this chair on stairs UNLESS you have someone to help you. Doing so is likely to cause a

fall or tip-over.

2. Negotiating stairs with a wheelchair always requires at least 2 attendants for safety.

If you fail to heed these warnings, damage to your chair, a fall, tip-over or loss of control may occur and

cause severe injury to the rider or others.

WARNING

Before you assist a rider, be sure to read the warnings “For Attendants” in Section V, Part K and follow all

instructions that apply. Be aware that you will need to learn safe methods best suited to your abilities.

N. CLIMBING STAIRS

WARNING

1. Use at least two attendants to move a chair and rider up stairs.

2. Move the chair and rider BACKWARD up the stairs.

3. The person at the rear is in control. He or she tilts the chair back to its balance point.

4. A second attendant at the front firmly grasps a non-detachable part of the front frame and lifts the chair

up and over one stair at a time.

5. The attendants move to the next stair up. Repeat for each stair, until you reach the landing.

O. DESCENDING STAIRS

WARNING

1. Use at least two attendants to move a chair and rider down stairs.

2. Move the chair and rider FORWARD down the stairs.

3. The person at the rear is in control. He or she tilts the chair to the balance point of the rear wheels

and rolls it to the edge of the top step.

4. A second attendant stands on the third step from the top and grasps the chair frame. He or she low-

ers the chair one step at a time by letting the rear wheels roll over the stair edge.

5. The attendants move to the next stair down. Repeat for each stair, until you reach the landing.

P. TILT USE AND BACK ANGLE ADJUSTMENT (MONO BACK)

WARNING

BEFORE you operate the tilt mechanism, or back angle adjustment (MONO back):

1. Always verify that the arms of the rider are stable on the armrests or within the armrests.

2. Always verify that the legs of the rider are stable on the footrest/legrest.

3. Never place hands, feet or foreign objects into the tilt mechanism.

4. Never push or propel the chair with the seat tilted in a forward position.

5. Never add chair accessories that are not specifically designed for the IRIS.

6. Never exceed a tilted position that aligns the backrest parallel to the ground.

If you fail to heed these warnings, damage to your chair, a fall, tip-over or loss of control may occur and cause

severe injury to the rider or others.

9

10

VI. SAFETY WARNINGS: FALLS & TIP-OVERS

ENGLISH

10

MK-100151 Rev. D

10

VII. WARNINGS, COMPONENTS & OPTIONS

F. FASTENERS

WARNING

Many of the screws, bolts and nuts on this chair are special high-strength

fasteners. Use of improper fasteners may cause your chair to fail.

1. ONLY use fasteners provided by an authorized supplier (or ones of

the same type and strength, as indicated by the markings on the

heads).

2. Over- or under-tightened fasteners may fail or cause damage to

chair parts.

3. If bolts or screws become loose, tighten them as soon as you can.

If you fail to heed these warnings damage to your chair, a fall, tip-over or

loss of control may occur and cause severe injury to the rider or others.

G. FOOTRESTS

WARNING

1. At the lowest point, footrests should be AT LEAST 2 inches off the

ground. If set too LOW, they may “hang up” on obstacles you can

expect to find in normal use. This may cause the chair to stop sud-

denly and tip forward.

2. To Avoid A Trip Or Fall When You Transfer:

a. Make sure your feet do not “hang up” or get caught in the

space between the footrests.

b. Avoid putting weight on the footrests, as the chair may tip forward.

c. Footrests should be swung out of the way or removed whenever

entering or exiting the wheelchair.

3. NEVER lift this chair by the footrests. Footrests detach and will not

bear the weight of this chair. Lift this chair only by non-detachable

parts of the main frame.

If you fail to heed these warnings damage to your chair, a fall, tip-over or

loss of control may occur and cause severe injury to the rider or others.

H. PNEUMATIC TIRES

WARNING

Proper inflation extends the life of your tires and makes your chair easier

to use.

1. Do not use this chair if any of the tires is under- or over-inflated. Check

weekly for proper inflation level, as listed on the tire sidewall.

2. Low pressure in a rear tire may cause the wheel lock on that side to slip

and allow the wheel to turn when you do not expect it.

3. Low pressure in any of the tires may cause the chair to veer to one side

and result in a loss of control.

4. Over-inflated tires may burst.

If you fail to heed these warnings, damage to your chair, a fall, tip-over or loss

of control may occur and cause severe injury to the rider or others.

A. ANTI-TIP TUBES (OPTIONAL)

WARNING

Anti-tip tubes can help keep your chair from tipping over backward in

normal conditions.

1. Sunrise recommends the use of anti-tip tubes:

2. When locked in place (in the “down” position) anti-tip tubes should

be BETWEEN 1 1/2 to 2 inches off the ground.

a. If set

h

igher

than 2 inches, they may not prevent a tip-over.

b. If set

lower

than 1 1/2 inches, they may “hang up” on obstacles

and cause a fall or tip over.

3. If you have to climb or descend a curb, or overcome an obstacle, it

may be necessary to have an attendant make sure the anti-tip tubes

are rotated up, and out of the way, so that the chair and rider do

not get stuck and/or become unstable.

If you fail to heed these warnings damage to your chair, a fall, tip-over or

loss of control may occur and cause severe injury to the rider or others.

B. ARMRESTS

WARNING

Armrests detach and will not bear the weight of this chair.

1. NEVER lift this chair by its armrests. They may come loose or

break.

2. Lift this chair only by non-detachable parts of the main frame.

If you fail to heed these warnings damage to your chair, a fall, tip-over or

loss of control may occur and cause severe injury to the rider or others.

C. PUSH HANDLES

WARNING

When you have a attendant, make sure that this chair has push handles.

1. Push handles provide secure points for an attendant to hold the

rear of this chair, to prevent a fall or tip-over. Make sure to use

push handles when you have an attendant.

2. Check to make sure push handle grips will not rotate or slip off.

If you fail to heed these warnings, damage to your chair, a fall, tip-over or

loss of control may occur and cause severe injury to the rider or others.

D. STROLLER HANDLE

WARNING

1. Always keep hands away from the locking mechanism located at the

bottom of the back canes when folding the back down or pulling it

back up.

2. Always keep fingers away from the interior of the hinge when read-

justing the adjustable stroller handle.

E. CUSHIONS

WARNING

1. Quickie standard foam cushions are not designed for the relief of

pressure.

2. If you suffer from pressure sores or if you are at risk that they will

occur, you may need a special seat system or a device to control

your posture. Consult your doctor, nurse or therapist to find out if

you need such a device for your well-being.

3. Seat pans are not intended to be used as a direct seating surface. A

cushion or other seating surface should be placed on the seat pan

before use.

If you fail to heed these warnings, damage to your chair, a fall, tip-over or

loss of control may occur and cause severe injury to the rider or others.

ENGLISH

Recommended Tire Pressures

11

MK-100151 Rev. D

I. POSITIONING BELTS (OPTIONAL)

WARNING

The positioning belt is predominately used to support your posture. It

can also be used to limit slipping and/or sliding that you might experience

when the chair is in motion. The positioning belt is not a transit rated

safety belt and should not be used in the place of a seat belt while being

transported in a motor vehicle. Improper use of Positioning belts may

cause severe injury or death. If you use a positioning belt, be sure to

follow the recommendations in this section:

1. Make sure the rider does not slide down in the wheelchair seat. If

this occurs, the rider may suffer chest compression or suffocate due

to pressure from the belts.

2. The belts must be snug, but must not be so tight that they interfere

with breathing. You should be able to slide your open hand, flat,

between the belt and the rider.

3. A pelvic wedge or a similar device can help keep the rider from slid-

ing down in the seat. Consult with the rider’s doctor, nurse or

therapist to find out if the rider needs such a device.

4. Use positioning belts only with a rider who can cooperate. Make

sure the rider can easily remove the belts in an emergency.

5. NEVER Use Positioning Belts:

a. As a patient restraint. A restraint requires a doctor’s order.

b. On a rider who is comatose or agitated.

c. As a motor vehicle restraint. In an accident or sudden stop the

rider may be thrown from the chair. Wheelchair seat belts will

not prevent this, and further injury may result from the belts or

straps.

If you fail to heed these warnings damage to your chair, a fall, tip-over or

loss of control may occur and cause severe injury to the rider or others.

J. QUICK-RELEASE AXLES

WARNING

1. Do not use this chair UNLESS you are sure that both quick-release

rear axles are locked.

2. An axle is not locked until the quick-release button pops out fully. If

the axle is not inserted fully, the wheel may come off during use,

endangering the rider.

3. Quick-release axles should be periodically cleaned and inspected for

function, and signs of wear or bending. Replace as necessary.

If you fail to heed these warnings, damage to your chair, a fall, tip-over or

loss of control may occur and cause severe injury to the rider or others.

K. REAR AXLES

WARNING

A change in set-up of the rear wheels will affect the center of balance

of your chair.

1. The farther you move the rear axles FORWARD, the more likely it

is that your chair will tip over backward.

2. Consult your doctor, nurse or therapist to find the best rear axle

set-up for your chair. Do not change the set-up UNLESS you are

sure you are not at risk to tip over.

3. Adjust the rear wheel locks after you make any change to the rear

axles.

a. If you fail to do so, the locks may not work.

b. Make sure lock arms embed in tires at least 1/8 inch when

locked.

If you fail to heed these warnings, damage to your chair, a fall, tip-over or

loss of control may occur and cause severe injury to the rider or others.

L. REAR WHEEL LOCKS

WARNING

Rear wheel locks are NOT designed to slow or stop a moving wheelchair.

Use them only to keep the rear wheels from rolling when your chair is at a

complete stop.

1. NEVER use rear wheel locks to try to slow or stop your chair when

it is moving. Doing so may cause a fall or tip-over

2. To keep the rear wheels from rolling, always set both rear wheel

locks when you transfer to or from your chair.

3. Low pressure in a rear tire may cause the wheel lock on that side

to slip and may allow the wheel to turn when you do not expect it.

4. Make sure lock arms embed in tires at least 1/8 inch when locked. If

you fail to do so, the locks may not work.

If you fail to heed these warnings damage to your chair, a fall, tip-over or

loss of control may occur and cause severe injury to the rider or others.

M. MODIFIED SEAT SYSTEMS

WARNING

Use of a seat system not approved by Sunrise may alter the center of bal-

ance of this chair. This may cause the chair to tip over.

1. Do not change the seat system of your chair UNLESS you consult

your authorized supplier first.

2. Use of a seating system not provided by Sunrise is prohibited for

transit use.

If you fail to heed these warnings damage to your chair, a fall, tip-over or

loss of control may occur and cause severe injury to the rider or others.

N. TRAY FOR VENT AND BATTERY

NOTE–

Vent tray only available on the Quickie IRIS.

NOTE–

This option is only compatible with wheelchairs having a mini-

mum floor-to-seat height of 15" (38 cm).

NOTE–

The battery tray components are not compatible with the

Attendant Wheel Lock option or foot release tilt.

WARNING

Never use this wheelchair as a seat in a motor vehicle unless all com-

ponents are removed from the battery tray, and properly secured

separately in the vehicle.

WARNING

Always contact Technical Service before installing or removing the

battery tray components to obtain the correct assembly locations of

the strut tubes, roller carriage assembly and caster brackets.

WARNING

The combined weight of the user plus the ventilator, battery and tray

components should not exceed 225 lbs (102 kg) on the Zippie IRIS,

250 lbs (114 kg) on the Quickie IRIS, and 350 lbs (159 kg) on the

heavy duty option.

O. ACCESSORY HOOK

WARNING

The weight limit for the accessory hook is 10lbs (total) for all items

If you fail to heed these warnings damage to your chair, a fall, tip-over or

loss of control may occur and cause severe injury to the rider or others.

VII. WARNINGS: COMPONENTS & OPTIONS

ENGLISH

MK-100151 Rev. D

12



  

Make sure tire pressure is cor-

rect and equal in both rear tires

and front caster tires, if pneu-

matic.

    Make sure all nuts and bolts

are snug.



Make sure all spokes and nipples

are tight on radial spoke wheels.



Use Tri-Flow Lubricant

(Teflon™-based) between all

modular frame connections and

parts.

  

Check for proper caster plate

adjustment. See instructions for

caster plate adjustment.

  

Make sure both front casters

touch the ground simultaneous-

ly. If they do not, add the prop-

er spacers between the bottom

bearing of the caster plate and

fork stem nut until they do.

Make sure you check for this

problem on a flat surface.



Consult with an authorized sup-

plier to adjust CG/CR forward



Consult with an authorized sup-

plier to adjust

ENGLISH

VIII. USE AND MAINTENANCE

WARNING

The owner and/or Caregiver is responsible for making sure that it has

been setup and adjusted by a trained service professional under the

advice of a healthcare professional. The chair may require periodic

safety and function checks or certain tool free adjustments that can be

performed by the owner, caregiver or authorized dealer if desired.

Always use parts and/or accessories that have been recommended or

approved by Sunrise Medical when servicing this chair.

A. INTRODUCTION

1. Proper maintenance will improve performance and extend the use-

ful life of your chair.

2. Clean your chair regularly. This will help you find loose or worn

parts and make your chair easier to use. You will need a mild

detergent solution and plenty of cleaning rags.

3. If discovered, repair or replace loose, worn, bent or damaged parts

b

efore using the chair

.

4. To protect your investment, have all major maintenance and repair

work done by your authorized dealer.

5. I

nspect and maintain this chair strictly per the maintenance chart.

6

. If you detect a problem, make sure to order parts, or have service,

and repair work done at your authorized dealer before use.

7

. At least once per year, have a complete inspection, safety check,

and service of your chair made by an authorized dealer.

D. CLEANING

 Paint Finish

D Clean the painted surfaces with mild soap or detergent at least once

a month.

E Protect the paint with a coat of non-abrasive auto wax every three

months.

 Axles and Moving Parts

D Clean around axles and moving parts WEEKLY with a slightly damp

(not wet) cloth.

E Wipe off or blow away any fluff, dust or dirt on axles or moving

parts.

 Upholstery

D Hand-wash (machine washing may damage fabric).

E Drip-dry only. DO NOT machine dry as heat will damage fabric.

 Basic Maintenance Materials available at local store

D Tire Pump

E 7LUHSUHVVXUHJDXJH

F Clean rags or cottRn cloth.

G Teflon-based Lubricant

H Mild Detergent.

B. CRITICAL SAFETY CHECKS

1. Tire Air Pressure:

Check air pressure in pneumatic tires at least

ONCE PER WEEK

. The

wheel locks will not grip properly if you fail to maintain the air pressure

shown on tire sidewall.

2. Axles & Axle Sleeves:

When checking axles and axle sleeves every six months, make sure they

are clean and tight.

Loose sleeves will damage the axle plate and will affect performance.

C. SAFETY CHECKLIST

NOTE– You do not need to grease or oil the chair.

E. TROUBLESHOOTING CHART

Weekly

3 Months

6 Months

Annually

 Tire inflation level

 Wheel locks



9LVXDOO\FKHFNIRUORRVHKDUGZDUH

 Armrests

 Axle and axle sleeves

 Quick-release axles

 Wheels, tires and spokes

 Casters

 Anti-tip tubes



)UDPH&DPEHUWXEHVDQG&URVVEUDFH

 Rollers

 Tilt cables and plunger

 Rocker arm



Service by authorized supplier

CHECK...

SOLUTIONS

S

Y

MP

TO

MS

Left turn in chair

Right turn in chair

Looseness in chair

Sluggish turning

Squeaks and rattles

Caster flutter

Chair drops fast into tilt

and is hard to return.

Chair is hard to tilt and

returns too fast.

1RWH7KHXVHURUFDUHJLYHUVKRXOGSHUIRUPWKHVHZHHNO\DQG

PRQWKO\FKHFNVWRPDLQWDLQWKHVDIHW\RIWKHLUFKDLU,IDQLWHPLV

QRWZRUNLQJSURSHUO\SOHDVHFRQWDFW\RXUDXWKRUL]HGGHDOHU.

13

MK-100151 Rev. D

ENGLISH

F. TO MOUNT AND REMOVE REAR WHEELS

Do not use this chair UNLESS you are sure both quick-release axles are locked. An unlocked axle may come

off during use and cause a fall.

NOTE–

Axle is not locked until the quick-release button (A) pops out fully.

2. To Install Wheel

a. Depress quick-release button (A) fully. This will release tension on ball bearings at other end.

b. Insert axle through hub of rear wheel (B).

c. Keep pressure on button (A) as you slide axle (C) into axle sleeve (D).

d. Release button to lock axle in sleeve. Adjust axle if it does not lock.

e. Repeat steps on other side.

3. To Remove Wheel

a. Depress quick-release button (A) fully.

b. Remove wheel by sliding axle (C) out of axle sleeve (D).

c. Repeat steps on other side.

WARNING

Wheel locks are installed at Sunrise and should be adjusted by your qualified service person. Inspect wheel locks

weekly per the maintenance chart. Do not use your chair UNLESS you are sure both wheel-locks can fully engage. A

wheel-lock that is not correctly adjusted may allow your chair to roll, or turn unexpectedly. Wheel-locks must be

adjusted after making sure the tires have the correct air pressure. When fully engaged, the arm should be imbedded

into the tire at least 1/8” to be effective. If you find the wheel locks have slipped or are not working correctly contact

your service provider for proper adjustment.

I . HUB LOCK

To operate Hub Lock

1. To Lock rear wheels, press button (E). Lever (F) will flip outward. Do not engage hub lock when chair is in

motion

2. To unlock wheels, press Lever (F) back down until Button (E) pops back out. Each lever operates one side of

the chair. To fully lock chair, both buttons must be pushed.

J. ANTI-TIP TUBES- REAR

Anti-tip tubes are recommended for all wheelchairs. Do not attempt to overcome Obstacles on your own.

1. Inserting Anti-Tip Tubes Into Receivers

a. Press in the rear anti-tip button(G) on the anti-tip so that both buttons are drawn inside.

b. Insert the anti-tip tube into the receiver (H).

c. Turn the anti-tip tube down until front release button pops through the receiver mounting hole.

d. Insert second anti-tip tube the same way.

2. Turning Anti-Tip Tubes Up

Turn the anti-tip tubes up when being pushed by attendant, and overcoming obstacles or climbing curbs.

a. Press in the rear anti-tip tube release button (G).

b. Hold button (G) in and turn anti-tip tube up (I).

c. Release the button.

d. Repeat with second anti-tip tube.

e. Remind attendant to return anti-tips to the down position after completing the maneuver.

3. Adjusting Anti-Tip Tube Wheel

The anti-tip tube wheels may have to be raised or lowered to achieve proper ground clearance (1-1/2" to 2").

a. Press the anti-tip wheel release button (J) so that the release pin is drawn inside.

b. Raise or lower to one of the three or six pre-drilled holes.

c. Release the button (J).

d. Adjust the second anti-tip tube wheel the same way. Both wheels should be at exactly the same height.

11

12

1413

13

A

B

C

D

E

F

I

G

H

11

12

14

J

VIII. USE AND MAINTENANCE

G. CUSHION INSTALLATION

H. WHEEL LOCKS

a. Place cushion on seat pan with hook material side down. The beveled edge of the cushion should be in

front, press it firmly into place.

MK-100151 Rev. D

14

ENGLISH

K. DUAL-POST ARMRESTS

1. Installation or Removal

a. The assembly is held securely in place when the securing lever (A) is facing outside.

b. Pull front securing lever (A) forward to release.

c. Insert or remove armrest.

d. Return securing lever to locked position.

2. Height-Adjustment (optional)

a. Release the upper securing lever (C).

b. Set armrest at desired height.

c. Return securing lever to locked position.

d. Move armrest up or down to allow armrest to snap into place.

3. Flip Back (optional)

a. Release the front securing lever only (A).

b. Flip the armrest back, it remains attached to the rear receiver.

c. To detach armrest completely pull rear securing lever (B) up.

d. Move armrest down into place.

e. Return securing lever to locked position.

L. HEIGHT-ADJUSTABLE ARMRESTS (optional)

1. Installation

a. Slide the outer armpost (1) into the receiver(7) mounted to the wheelchair frame.

b. The armrest will automatically lock into place.

2. Height Adjustment

a. Rotate release lever (2) to second stop.

b. Slide armrest pad (4) up or down to desired height.

c. Return lever (2) to locked position against armpost.

d. Push arm pad down until upper armpost locks firmly into place.

3. Removing Armrest

a. Grip release lever (3) and pull up to remove the armrest.

M. ADJUSTABLE LOCKING FLIP-UP ARMRESTS

1. Flip up and down

a. Release the upper securing lever (2).

b. Flip the armrest back (1), it remains attached to the back post.

c. Move armrest down into place.

d. The lever (2) locks itself in position automatically.

1615

17

18

Flip-Back receivers

Fixed receivers

1. Armrest Pad

2. Upper Securing Lever

3. Flip-back tube

4. Angle Adjust Bracket

5. Clamp

6. Back cane

Adjustable Locking Flip-Up

15

16

18

A

B

C

1

5

6

2

3

4

VIII. USE AND MAINTENANCE

 Armrest pad

 Height Release Lever

 Release lever

 Outer armpost

 Transfer bar

 Side panel

 Receiver

 Receiver adjustment hardware



15

MK-100151 Rev. D

ENGLISH

1. Flip Back the armrest for access and transfers.

a. Release the armrest (A) by pulling up on the securing lever (this will unlock the armrest).

N. CANTILEVER ARMRESTS

b. Rotate the armrest back.

2. Return the armrest to the riding position

a. Rotate the armrest back to riding position.

b. Be sure to lock the armrest by returning the securing lever to It’s locked position.

NOTE–

Figure shows Lever(A) in locked position.

O. SWING-AWAY HANGERS/FOOTRESTS

Swing-in-Swing-out Hangers and Footrests (60°, 70º, 80°)

1. Installation

a. Place swing-in/swing-out pivot saddle into the receiver (B) on front frame tube with the footrest

facing inward or outward from the frame.

b. Rotate the footrest inward until it locks into place on locking plate.

2. Removal

a. To remove footrest, release latch (C) by pulling lever upward or pushing lever downward.

b. Rotate footrest inward or outward and lift.

P. HEAVY-DUTY, LIFT-OFF FOOTRESTS (optional)

1. Installation

Slide pivot saddle (D) into receiver (E) on front frame tube until it locks into place.

2. Removal

To remove footrest, push release latch (F) while lifting up footrest from receiver.

Q. ARTICULATING LEGREST (optional)

1. Installation or Removal

To install or remove Articulating Legrest (ALR) see instructions for Swing-away Footrest installation.

2. Elevation Adjustment

a. To raise legrest, lift to desired position. Legrest will automatically lock in place.

b. To lower legrest, while seated in chair, press release lever (G) down and lower Legrest to desired posi-

tion. Legrest will automatically lock in place.

3. Height Adjustment of the Calf Pad

a. Rotate the tube clamp (H) towards the outside.

b. Slide calf pad assembly up or down.

c. Rotate calf pad assembly ( I ) back in the desired indented position.

19

20

21

22

20

21

D

E

F

B

C

19

A

VIII. USE AND MAINTENANCE

Articulating

legrest



*

I

H

MK-100151 Rev. D

16

ENGLISH

S. Z-FINITY™FOOTREST SYSTEM

CAUTION–

The Z-Finity™Footrest system is rated to 165lbs (75kg)

With the footrest system, Sunrise Medical offers either a single Flip-up Footplate (B), or dual footplates (C) that

are able to accomodate all of the possible heights and adjustment angles that the rider may require for their

comfort and support.

1. Basic Footrest Installation

a. From the side, place the pivot (E) into the top of the frame tube which guides the hanger into the cor-

rect alignment with the locking plate (F) on front frame tube.

b. Rotate the footrest towards the front of the chair until it locks into place on locking plate.

2. Removal

a. To remove footrest, release latch (G) by pulling lever upward or pushing lever downward.

b. Rotate footrest inward or outward and lift.

24 25

T. Z-FINITY™SWING-AWAY FOOTREST

25 26

The footrest system can also accomodate a swing-away hanger(D) with dual footplates (C) that are both height

adjustable and angle adjustable.

Swing-in-Swing-out Hangers and Footrests (80°)

VIII. USE AND MAINTENANCE

25

D

24

B

C

26

E

G

F

Elevating

Legrest



$

R. ELEVATING LEGREST (optional)

1. Installation or Removal

To install or remove Elevating Legrest (ELR) see instructions for Swing-away Footrest

installation.

2. Elevation Adjustment

a. To raise legrest, lift to desired position. Legrest will automatically lock in place.

b. To lower legrest, while seated in chair, press release lever (A) down and lower legrest to desired posi-

tion. Legrest will automatically lock in place.

23

17

MK-100151 Rev. D

ENGLISH

U. TILT-IN-SPACE MECHANISM

The tilt-in-space mechanism is installed by Sunrise. Two cable/trigger mechanisms positively lock the chair in

place from -5º to 60º depending on the set-up.

The Quickie/Zippie IRIS has the capability to provide from 0º to 5º of forward tilt. DO NOT ATTEMPT TO

MAKE THIS ADJUSTMENT. This adjustment must be done by an authorized supplier.

1. Trigger Tilt Operation

a. Depressing both triggers (A) at the same time disengages the locking mechanism and allows the seat

and back to rotate in space. Releasing the triggers positively locks the rockers in place.

b. The approximate degree of tilt the seat is at can be seen on the tilt indicator (C).

c. To lock out the tilting function, insert the locking pin (B) into the trigger holder.

2. Foot Release

a. Depressing foot pedal (D) disengages the locking mechanism and allows the seat and back to rotate in

space. Releasing the foot pedal positively locks the rockers in place.

b. The approximate degree of tilt the seat is at can be seen on the tilt indicator (C).

V. STROLLER HANDLE EXTENSION (option)

Installation

a. Press button (E) on the stroller handle so that release pins are drawn inside the tube.

b. Insert the tube into the back tube receiver (F) until the release pin protrudes through the receiver

mounting hole.

W. RECLINING BACK

The dual trigger reclining mechanism is installed by Sunrise.

To Recline or Raise Backrest

a. Depress both triggers (G) at the same time. Releasing the triggers positively locks the backrest in

place within its 60° range.

b. To lock out the adjustment system, insert the locking pin (H) into the trigger holder.

NOTE - ALWAYS

lock the dual trigger reclining mechanism securely in place after positioning the backrest

27

28

29

30

29

30

E

F

G

H

VIII. USE AND MAINTENANCE

27

28

A

B

C

D

MK-100151 Rev. D

18

ENGLISH

X. MONO BACK STROLLER HANDLE

Height/Angle Adjustment

a. Press button (A) on the stroller handle so that it releases the push handle.

b. Adjust the push handles to a comfortable position.

NOTE– ALWAYS

lock Push handles by moving them slightly being sure to hear the mechanism click into the

locked position.

Y. FOLDING THE MONO BACK FOR TRANSPORT

Height/Angle Adjustment

a. Push down on the release lever(B) and fold the backrest forward for easier transport of the chair.

b. To return the back to the riding position just pull up on the back until it locks into place at the original

position.

NOTE–

AFTER FOLDING OR UNFOLDING THE MONO BACK,

ALWAYS

check to make sure it is in the

locked position by moving it slightly and listening for the mechanism to click into the locked position.

Z. FOLDING / UNFOLDING FRAME (optional)

1. Unfolding

a. Attach the wheels and make sure they are locked in the axle sleeves

b. Push down on folding struts (C) until they Lock. Make sure lock handle(D) is down and double check

that the frame is locked by pushing inwards on the frames.

c. Add the seating system, and footrests,

2. Folding

a. Remove the rider, seating system, and Flip-up the footplates. Disengage the wheel-locks.

b. Unlock the mechanism by pulling up on the lock handle(D), then using both hands, grasp the folding

struts while pushing on the locking lever release buttons(E) with your thumbs.

c. Once the chair starts to fold, push the frames together until the chair is fully folded

d. Remove the Wheels using the Quick Release buttons. The chair is ready for transport or storage.

AA. INSPECT

Once the wheelchair is assembled and adjusted, it should roll smoothly and easily. All accessories should also

perform smoothly. If you have any problems, follow these procedures:

1. Review assembly and adjustment sections to make sure the chair was properly prepared.

2. Review the troubleshooting guide.

3. If your problem persists, contact your authorized supplier. If you still have a problem after contacting your

authorized supplier, contact Sunrise customer service. See the introduction page located in the front of this

User’s Manual for details on how to contact your authorized supplier, or Sunrise customer service.

31

32

33 34

31

A

32

B

33

C

D

34

E

D

E

VIII. USE AND MAINTENANCE

19

MK-100151 Rev. D

ENGLISH

WARNING

7KHRZQHURIWKLVFKDLULVUHVSRQVLEOHIRUPDNLLQJVXUHWKDWLWKDVEHHQVHWXSDQGDG

MXVWHGE\DWUDLQHG

VHUYLFHSURIHVVLRQDOXQGHUWKHDGYLFHRIDKHDOWKFDUHDGYLVRU6HUYLFHRUDGMXVWPHQWVVKRXOGRQO\EHGRQH

Z

LWKWKHDG

YLFHRIDKHDOWKFDUHSURIHVVLRQDO$OZD\VXVHSDUWVDQGDFFHVVRULHVWKDWKDYHEHHQ

UHFRPPHQGHGDQGD

SSURYHGE\6XQULVH0HGLFDOZKHQVHUYLFLQJWKLVFKDLU6HUYLFHDQGRUDGMXVWPHQWV

WKDWUHTXLUHWKHXVHRIWRROVVKRXOGRQO\EHGRQHE\DQDXWKRUL]HGVXSSOLHUXQGHUWKHDGYLFHRID

K

HDOWKFDUHSURIHVVLRQDO

A. DEALER SERVICE INTRODUCTION

1. At least once per year, this chair should have a complete inspection, safety check, and regular service

made by an authorized dealer.

2. If you have discovered a worn, bent, or damaged part, repair or replace them with recommended parts

before returning this chair t

o service..

3. All major maintenance and repair work should be done by the authorized dealer.

B. CRITICAL MAINTENANCE TIPS

1. Torque settings:

A torque setting is the optimum tightening which should be made on a particular fastener. It is important to

use proper torque settings where specified. When not specified, torque settings should be 60 in-lbs

2. Dealer Service and Adjustment Reference materials:

Go to www.sunrisemedical.com for parts manuals, instruction sheets, and instructional videos that will aid in the

repair of the Quickie/Zippie Family of wheelchairs.

C. CLEANING

1. Paint Finish

a. Clean the painted surfaces with mild soap or detergent.

b. Protect the paint with a coat of non-abrasive auto wax.

2. Axles and Moving Parts

a. Clean around axles and moving parts with a slightly damp (not wet) cloth.

b. Wipe off or blow away any fluff, dust or dirt on axles or moving parts.

c. DO NOT USE 3 in 1 oil, or WD-40 ® for lubrication. Only use Teflon based Lubricant when working

on this wheelchair.

D. REAR AXLE

1. Rear Wheel Axle Adjustment

Tight axle sleeves should be maintained for proper performance of the wheelchair.

a. To adjust the axle (A) you will need a 3/4" wrench (B) to turn the outside axle nuts (C).

b. You will also need a 1/2" wrench to hold the the opposite end of the axle (D), and prevent the axle from

turning, while you are adjusting the nut.

c. Turn the outside axle nut clockwise to tighten.

d. There should only be zero to ten thousandths of an inch (.010") of play.

2. Moving the Rear Axle for Weight Distribution

Weight distribution between the front and rear wheels is primarily adjusted by moving the rear axles forward

or rearward on the frame. Moving the axles REARWARD provides better forward and rearward tipping stabili-

ty. Moving the axles FORWARD shifts more of the rider’s weight onto the REAR wheels, providing the follow-

ing benefits: the front end of the wheelchair becomes lighter, thus reducing the turning effort, and with a short-

er wheelbase the turning radius is reduced.

CAUTION

- Moving the Rear axles can effect the stability of the device ALWAYS check stability with the rider

before putting the chair into service

IMPORTANT NOTE–

The axle adjustment on each side of the chair should be equal.

NOTE–

Use a torque setting of 120 in.-lbs. When setting-up the axle plate.

NOTE–

The frame must be kept horizontal when height adjustments are made. Refer to matrix in the ordering

guide for proper setting.

1

IX. DEALER SERVICE & ADJUSTMENT.

TOOLS YOU WILL NEED

1. Imperial Hex key set

2. Metric Hex key set

3. Imperial Open-end Wrench set

4. Metric Open-end Wrench set

5. Torque wrench

6. Imperial Hex bit Socket set

7. Metric Hex bit Socket set

8. Phillips and Flat screwdrivers

1

A

B

C

D

MK-100151 Rev. D

20

La pagina sta caricando ...

Quickie Quickie IRIS Manuale del proprietario

Questo manuale è adatto anche per

Quickie Quickie IRIS Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti