Zanussi FA1023 Manuale utente

Marca: Zanussi

Modello: FA1023

Categoria: Lavatrici

Tipo: Manuale utente

Questo manuale è adatto anche per

fa 1023

INSTRUCTION BOOKLET

РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ

132978280

RUS

132978280 gb.qxd 17/01/2007 10:05 Pagina 1

WASHING MACHINE

СТИРАЛЬНАЯ МАШИНА

FA 1023

AQUACYCLE 1050

30°- 60°

30°- 40°

30°- 60°

60°- 90°

40°- 60°

30°- 40°

60°- 90°

The symbols you will see on some paragraphs of this booklet have the following meaning:

The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is

particularly important for your safety or correct functioning of the appliance.

The information marked with this symbol provides additional instructions and practical tips on the use

of the appliance.

Tips and information about economical and ecological use of the machine are marked with this symbol.

Our contribution to the protection of the environment: we use recycled paper.

Transport damages

When unpacking the appliance, check that it is not

damaged. If in doubt, do not use it and contact the

Service Centre.

Dear customer,

Please read these operating instructions carefully

and pay particular attention to the safety notes

indicated in the first pages. We recommend that you

keep this instruction booklet for future reference and

pass it on to any future owners.

Temperatures 9

Before loading the laundry 9

Maximum loads 9

Laundry weights 9

Removing stains 9

Detergents and additives 10

Operating sequence 11-12

International wash code symbols 12

Washing programmes 13-14

Maintenance 15

Bodywork 15

Door seal 15

Detergent dispenser drawer 15

Drain pump 15

Water inlet filter 16

Emergency emptying out 16

Frost precautions 16

Something not working? 17-18

Warnings 3-4

Disposal 4

Tips for environmental protection 4

Technical specifications 4

Installation 5

Unpacking 5

Positioning and levelling 5

Water inlet 5

Water drainage 6

Electrical connection 6

Your new washing machine 7

Description of the appliance 7

Detergent dispenser drawer 7

Use 8

Control panel 8

Controls 8

Washing hints 9

Sorting the laundry 9

Contents

132978280 gb.qxd 17/01/2007 10:05 Pagina 2

ENGLISH

Installation

• All internal packing must be removed before using

the appliance. Serious damage may be caused to

the machine or adjacent furniture if the protective

transit devices are not removed or are not

completely removed. Refer to the relevant

paragraph in the instruction book.

• Any electrical work required to install this

appliance must be carried out by a qualified

electrician.

• Any plumbing work required to install this

appliance must be carried out by a qualified

plumber.

• After having installed the machine, check that it is

not standing on its electrical supply cable.

• If the appliance is placed on a carpeted floor,

ensure that air can circulate freely between the

feet and the floor.

Use

• This appliance is designed for domestic use. It

must not be used for purposes other than those

for which it was designed.

• Only wash fabrics which are designed to be

machine washed. Follow the instructions on each

garment label.

• Do not overload the appliance. Follow the

instructions in the instruction book.

• Make sure that all pockets are empty. Objects

such as coins, safety pins, pins and screws can

cause extensive damage.

• Do not machine wash garments saturated with

petroleum, methylated spirits, trichlorethylene, etc.

If such fluids have been used to remove stains

prior to washing, wait until they have completely

evaporated from the fabric before placing

garments in the appliance.

• Place small items such as socks, belts, etc. in a

cloth bag or pillowcase to prevent them getting

trapped between the drum and the tub.

• Use only the recommended quantities of fabric

softener. An excessive amount could damage the

laundry.

• Leave the porthole door slightly ajar when the

appliance is not in use. This preserves the door

seal and prevents the formation of musty smells.

• Always check that water has emptied out before

opening the door. If not, drain the water following

the instructions in the instruction book.

Warnings

• Always unplug the appliance and shut the water

tap after use.

General safety

• Repairs to the machine must be carried out only

by qualified personnel. Repairs carried out by

inexperienced persons could cause serious

danger. Contact your local Service Centre.

• Never pull the power supply cable to remove the

plug from the socket; always take hold of the plug

itself.

• During high temperature wash programmes the

door glass may get hot. Do not touch it!

Child safety

• Children are often not aware of how dangerous

electrical appliances can be. When the machine is

working, children should be carefully supervised

and not be allowed to play with the appliance.

• The packaging components (e.g. plastic film,

polystyrene) can be dangerous to children -

danger of suffocation! Keep them out of children’s

reach.

• Keep all detergents in a safe place out of

children’s reach.

• Make sure that children or pets do not climb into

the drum. To avoid this the machine incorporates

a special feature. To activate this device, rotate

the button (without pressing it) inside the door

clockwise until the groove is horizontal. If

necessary use a coin. To disable this device and

restore the possibility of closing the door, rotate

the button anti-clockwise until the groove is

vertical.

• When the appliance is to be scrapped, cut off the

electrical supply cable and destroy the plug with

the remaining cable. Disable the door catch in

order to prevent children from becoming trapped

inside while playing.

P1131

The following warnings are provided in the interests of overall safety. You must read them carefully before

installing or using the appliance.

132978280 gb.qxd 17/01/2007 10:05 Pagina 3

DIMENSIONS Height 85 cm

Width 60 cm

Depth 59 cm

MAXIMUM LOAD Cotton 5 kg

Synthetics 2 kg

Delicates 2 kg

Woollens 1 kg

SPIN SPEED 1050 rpm max.

POWER SUPPLY VOLTAGE/FREQUENCY 220-230 V/50 Hz

TOTAL POWER ABSORBED 2200 W

MINIMUM FUSE PROTECTION 10 A

WATER PRESSURE Minimum 0.05 MPa

Maximum 0.80 MPa

This appliance complies with the following EEC Directives:

73/23/EEC of 19/02/73 relating to low voltage

89/336/EEC of 03/05/89 relating to electromagnetic compatibility.

Technical specifications

Disposal

Tips for environmental protection

Packaging materials

The materials marked with the symbol are

recyclable.

>PE<=polyethylene

>PS<=polystyrene

>PP<=polypropylene

This means that they can be recycled by disposing

of them properly in appropriate collection

containers.

Machine

Use authorised disposal sites for your old appliance.

Help to keep your country tidy!

The symbol on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it shall be handed over to

the applicable collection point for the recycling of

electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent

potential negative consequences for the environment

and human health, which could otherwise be caused

by inappropriate waste handling of this product. For

more detailed information about recycling of this

product, please contact your local city office, your

household waste disposal service or the shop where

you purchased the product.

To save water, energy and to help protect the

environment, we recommend that you follow these

tips:

• Normally soiled laundry may be washed without

prewashing in order to save detergent, water and

time (the environment is protected too!).

• The machine works more economically if it is fully

loaded. Do not overload!

• With adequate pre-treatment, stains and limited

soiling can be removed; the laundry can then be

washed at a lower temperature.

• Measure out detergent according to the water

hardness, the degree of soiling and the quantity of

laundry being washed.

132978280 gb.qxd 17/01/2007 10:05 Pagina 4

ENGLISH

Unpacking

All transit bolts and packing must be

removed

before using the appliance.

You are advised to keep all transit devices so that

they can be refitted if the machine ever has to be

transported again.

1. Using a spanner, unscrew and remove the two

rear bottom screws. Slide out the two plastic

pins.

2. Lay the machine on its back, taking care not to

squash the hoses. This can be avoided by

placing one of the corner packing pieces

between the machine and the floor.

3. Remove the polystyrene block from the bottom

of the machine and release the two plastic bags.

4. Very carefully slide out the left polythene bag,

removing it towards the right and then

downwards.

5. Very carefully slide out the right polythene bag,

removing it towards the left and then upwards.

P1127

P1126

P1124

P0001

P1129

6. Set the machine upright and remove the

remaining rear screw. Slide out the relevant pin.

7. Plug all the holes with the plugs which you will

find in the envelope containing the instruction

booklet.

Positioning and levelling

Install the machine on a flat hard floor.

Make sure that air circulation around the machine is

not impeded by carpets, rugs etc. Check that the

machine does not touch the wall or other kitchen

units.

Carefully level by screwing the adjustable feet in or

out. Never place cardboard, wood or similar

materials under the machine to compensate for any

unevenness in the floor.

Water inlet

Connect the water inlet hose to a tap with a 3/4"

thread.

P1088

P1051

P0002

P1128

Installation

132978280 gb.qxd 17/01/2007 10:05 Pagina 5

The other end of the inlet hose which connects to

the machine can be turned in any direction. Simply

loosen the fitting, rotate the hose and retighten the

fitting, making sure there are no water leaks.

The inlet hose must not be lengthened. If it is too

short and you do not wish to move the tap, you will

have to purchase a new, longer hose specially

designed for this type of use.

Water drainage

The end of the drain hose can be positioned in three

ways:

Hooked over the edge of a sink using the plastic

hose guide supplied with the machine. In this

case, make sure the end cannot come unhooked

when the machine is emptying.

This could be done by tying it to the tap with a piece

of string or attaching it to the wall.

In a sink drain pipe branch. This branch must be

above the trap so that the bend is at least 60 cm

above the ground.

Directly into a drain pipe at a height of not less

than 60 cm and not more than 90 cm.

The end of the drain hose must always be

ventilated, i.e. the inside diameter of the drain pipe

must be larger than the outside diameter of the drain

hose.

P0022

P0021

The drain hose must not be kinked.

For a correct functioning of the machine the

drain hose must remain hooked on the proper

support piece situated on the top part of the

back side of the appliance.

Electrical connection

This machine is designed to operate on a 220-230

V, single-phase, 50 Hz supply.

Check that your domestic electrical installation can

take the maximum load required (2.2 kW), also

taking into account any other appliances in use.

Connect the machine to an earthed socket.

The manufacturer declines any responsibility

for damage or injury through failure to comply

with the above safety precaution.

Should the appliance power supply cable

need to be replaced, this should be carried

out by our Service Centre.

Please ensure that when the appliance is

installed the power supply cable is easily

accessible.

P1118

132978280 gb.qxd 17/01/2007 10:05 Pagina 6

ENGLISH

This new machine meets all modern requirements for effective treatment of laundry with low water, energy and

detergent consumption.

• The temperature selector dial will allow you to choose the most suitable temperature for your laundry.

• The automatic cooling of the washing water from 90° to 60°C before draining will prevent old drain pipes

from being deformed.

• The ECO valve allows total use of detergent and reduces water consumption so saving energy.

• The unbalance detection device prevents vibration during spinning.

1 Detergent dispenser drawer

2 Programme chart

3 Control panel

4 Door handle

5 Drain pump

6 Adjustable feet

Detergent dispenser drawer

Prewash

Main wash

Fabric softener, starch

Your new washing machine

Description of the appliance

AQUACYCLE 1050

30°- 60°

30°- 40°

30°- 60°

60°- 90°

40°- 60°

30°- 40°

60°- 90°

C0094

132978280 gb.qxd 17/01/2007 10:05 Pagina 7

Use

1 Detergent dispenser drawer

2 Rinse hold (anti-crease) button

By depressing this button the water of the last rinse

is not emptied out to avoid any creasing in the

laundry.

To drain water and spin, depress button again.

To drain only, select programme P.

3 Speen speed reduction button

By depressing this button the final spin speed is

reduced as follows:

- from 1050 to 600 rpm on programmes for cotton

and linen

- from 750 to 400 rpm in programmes for

synthetics, delicates and wool.

4 Half load button

Select this button to reduce water consumption on

the rinse cycle when washing a half load of cottons

or linens.

5 Mains on light

This light is on whilst the machine is operating and

goes out at the end of the programme.

6 Temperature selector dial

Turn this dial to select the washing temperature.

Position = cold wash.

7 Programme selector Dial / ON-OFF

switch

To select the required programme, turn this dial

clockwise until the programme letter is exactly

opposite the pointer.

Pull the dial outwards to start the machine.

Depress the dial to interrupt or change a programme

and to switch the machine off.

90°

80°

70°

60°

50°

40°

30°

FA 1023

AQUACYCLE 1050

30°- 60°

30°- 40°

30°- 60°

2345 6

60°- 90°

40°- 60°

30°- 40°

60°- 90°

Control panel

132978280 gb.qxd 17/01/2007 10:05 Pagina 8

ENGLISH

Washing hints

Sorting the laundry

Follow the wash code symbols on each garment

label and the manufacturer’s washing instructions.

Sort the laundry as follows:

whites, coloureds, synthetics, delicates, woollens.

Temperatures

90°

for normally soiled white cottons and linen

(e.g. tea cloths, towels, tablecloths,

sheets...)

60° for normally soiled, colour fast garments

(e.g. shirts, night dresses, pyjamas....) in

linen, cotton or synthetic fibres and for

lightly soiled white cotton (e.g.

underwear).

(cold) for delicate items (e.g. net curtains), mixed

30°-40° laundry including synthetic fibres and

woollens bearing the label «pure new

wool, machine washable, non-shrink».

Before loading the laundry

Never wash whites and coloureds together. Whites

may lose their “whiteness” in the wash.

New coloured items may run in the first wash; they

should therefore be washed separately the first time.

Make sure that no metal objects are left in the

laundry (e.g. hair clips, safety pins, pins).

Button up pillowcases, close zip fasteners, hooks

and poppers. Tie any belts or long tapes.

Remove persistent stains before washing. Rub

particularly soiled areas with a special detergent or

detergent paste.

Treat curtains with special care. Remove hooks or

tie them up in a bag or net.

Maximum loads

Recommended loads are indicated in the

programme charts.

General rules:

Cotton, linen: drum full but not too tightly packed;

Synthetics: drum no more than half full;

Delicate fabrics and woollens: drum no more than

one third full.

Washing a maximum load makes the most efficient

use of water and energy.

For heavily soiled laundry, reduce the load size.

Laundry weights

The following weights are indicative:

bathrobe 1200 g

napkin 100 g

quilt cover 700 g

sheet 500 g

pillow case 200 g

tablecloth 250 g

towelling towel 200 g

tea cloth 100 g

night dress 200 g

ladies’ briefs 100 g

man’s work shirt 600 g

man’s shirt 200 g

man’s pyjamas 500 g

blouse 100 g

men’s underpants 100 g

Removing stains

Stubborn stains may not be removed by just water

and detergent. It is therefore advisable to treat them

prior to washing.

Blood: treat fresh stains with cold water. For dried

stains, soak overnight in water with a special

detergent then rub in the soap and water.

Oil based paint: moisten with benzine stain

remover, lay the garment on a soft cloth and dab the

stain; treat several times.

Dried grease stains: moisten with turpentine, lay

the garment on a soft surface and dab the stain with

the fingertips and a cotton cloth.

Rust: oxalic acid dissolved in hot water or a rust

removing product used cold. Be careful with rust

stains which are not recent since the cellulose

structure will already have been damaged and the

fabric tends to hole.

Mould stains: treat with bleach, rinse well (whites

and fast coloureds only).

Grass: soap lightly and treat with bleach (whites and

fast coloureds only).

Ball point pen and glue: moisten with acetone (*),

lay the garment on a soft cloth and dab the stain.

Lipstick: moisten with acetone as above, then treat

stains with methylated spirits. Remove any residual

marks from white fabrics with bleach.

132978280 gb.qxd 17/01/2007 10:05 Pagina 9

Red wine: soak in water and detergent, rinse and

treat with acetic or citric acid, then rinse. Treat any

residual marks with bleach.

Ink: depending on the type of ink, moisten the fabric

first with acetone (*), then with acetic acid; treat any

residual marks on white fabrics with bleach and then

rinse thoroughly.

Tar stains: first treat with stain remover, methylated

spirits or benzine, then rub with detergent paste.

(*) do not use acetone on artificial silk.

Detergents and additives

Good washing results also depend on the choice of

detergent and use of the correct quantities to avoid

waste and protect the environment. Although

biodegradable, detergents contain substances

which, in large quantities, can upset the delicate

balance of nature.

The choice of detergent will depend on the type of

fabric (delicates, woollens, cottons, etc.), the colour,

washing temperature and degree of soiling.

All commonly available washing machine detergents

may be used in this appliance:

– powder detergents for all types of fabric,

– powder detergents for delicate fabrics (60°C max)

and woollens,

– liquid detergents, preferably for low temperature

wash programmes (60°C max) for all types of

fabric, or special for woollens only.

The detergent and any additives must be placed in

the appropriate compartments of the dispenser

drawer before starting the wash programme.

If using concentrated powder or liquid detergents, a

programme without prewash must be selected.

The washing machine incorporates a recirculation

system which allows an optimal use of the

concentrated detergent.

Pour liquid detergent into the dispenser drawer

compartment marked just before starting the

programme.

Any fabric softener or starching additives must be

poured into the compartment marked before

starting the wash programme.

Follow the product manufacturer’s

recommendations on quantities to use and do not

exceed the «MAX» mark in the detergent

dispenser drawer.

Quantity of detergent to be used

The type and quantity of detergent will depend on

the type of fabric, load size, degree of soiling and

hardness of the water used.

Water hardness is classified in so-called “degrees”

of hardness. Information on hardness of the water in

your area can be obtained from the relevant water

supply company, or from your local authority.

Follow the product manufacturers’ instructions on

quantities to use.

Use less detergent if:

– you are washing a small load,

– the laundry is lightly soiled,

– large amounts of foam form during washing.

132978280 gb.qxd 17/01/2007 10:05 Pagina 10

ENGLISH

4. Select the desired option

Depress the required button.

5. Select the temperature

Turn the dial to the required setting.

6. Select the programme and start the

machine

Turn the programme selector dial clockwise to the

required programme and pull it outwards: the mains

on light comes on and the machine starts to

operate.

M0049

M0046S

M0045S

Operating sequence

Before the first wash we recommend that you pour 2

litres of water into the main wash compartment

of the detergent drawer in order to activate the ECO

valve. Then run a cotton cycle at 90°C, with the

machine empty, in order to remove any

manufacturing residue from the drum and tub.

Pour half a measure of detergent into the main wash

compartment and start up the machine.

1. Place the laundry in the drum

Open the door.

Place the laundry in the drum, one item at a time,

shaking them out as much as possible.

Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops. Measure

out the amount of detergent recommended by the

manufacturer in a graduated cup and pour it into the

main wash compartment .

If you wish to carry out the prewash, pour detergent

into the appropriate compartment marked .

3. Measure out the additive

If required, pour fabric softener into the

compartment marked , without exceeding the

«MAX» mark.

C0096

C0095

P0004

132978280 gb.qxd 17/01/2007 10:05 Pagina 11

7. At the end of the programme

The machine stops automatically. The mains on light

goes out.

If you have selected a programme which ends with

the water of the last rinse left in the tub (button

depressed), drain the water before opening the

door.

Wait one or two minutes before opening the door to

give the electric locking mechanism time to release

it.

Depress the programme selector dial to switch the

machine off.

Remove the laundry.

Turn the drum by hand to make sure it is completely

empty, so as to avoid any forgotten items being

damaged in a subsequent wash (e.g. shrinking) or

their colour running into a load of whites.

Release any buttons which have been pressed.

Turn the water tap off and unplug the machine.

Leave the door ajar to air the machine.

International wash code symbols

These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry.

Energetic wash

Delicate wash

Max. wash

temperature

95°C

Max. wash

temperature

60°C

Max. wash

temperature

40°C

Max. wash

temperature

30°C

Hand wash

Do not

wash

at all

Bleaching Bleach in cold water Do not bleach

Ironing Hot iron

max 200°C

Warm iron

max 150°C

Lukewarm iron

max 110°C

Do not iron

Dry cleaning Dry cleaning

in all solvents

Dry cleaning in

perchlorethylene,

petrol, pure alcohol,

R 111 & R 113

Dry cleaning

in petrol,

pure alcohol

and R 113

Do not

dry clean

Drying Flat On the line On clothes

hanger

Tumble dry

high

temperature

low

temperature

Do not

tumble dry

132978280 gb.qxd 17/01/2007 10:05 Pagina 12

ENGLISH

Programme table

Washing programmes for cotton and linen

Max. load: 5 kg

The temperatures indicated are the optimum temperatures for each programme and depend on the type of

laundry and degree of soiling.

In compliance with EC directive 92/75, the consumption figures indicated on the energy label refer to the 60°C

wash programme for cotton (programme “B”).

Progr.

Temp. Type of laundry Cycle description

Possible

options

60°-90°

WHITES WITH PREWASH,

for example work garments,

sheets, household linen,

underwear, towels

Prewash

Wash at 60°-90°C

3 rinses

Long spin

WHITES WITHOUT

PREWASH, for example

household linen, sheets,

shirts, underwear

Wash at 60°-90°C

3 rinses

Long spin

COLOUREDS WITHOUT

PREWASH, for example

shirts, blouses, terry cloths,

underwear, sheets

Wash at 40°-60°C

3 rinses

Long spin

Softeners

60°-90°

40°-60°

Long spin

Separate spin

for cotton and linen

Drain and long spin

1 rinse with liquid

additive

Long spin

Hand washed items

to be softened

QUICK WASH

lightly soiled cotton or linen

items

Wash at 30°-40°C

3 rinses

Long spin

30°-40°

Rinses

This programme can be

used for rinsing hand

washed garments.

4 rinses with liquid

additive, if required

Long spin

132978280 gb.qxd 17/01/2007 10:05 Pagina 13

Programme table

The temperatures indicated are the optimum temperatures for each programme and depend on the type of

laundry and degree of soiling.

Washing programmes for synthetics, mixed fabrics, delicates and wool

Max. load: 2 kg, wool 1 kg

Progr. Temp. Type of laundry Cycle description

Possible

options

SYNTHETICS WITHOUT

PREWASH, for example

shirts, blouses, mixed fabrics

Wash at 30°-60°C

3 rinses

Short spin

Delicate fabrics - Silk, for

example curtains

Wash at 30°-40°C

3 rinses

Short spin

SYNTHETICS WITH

PREWASH, for example

underwear, coloured items,

shirts, blouses

Rinses

Wash at 30°-40°C

3 rinses

Short spin

30°-40°

Wool

Special programme for

garments bearing the “Pure

new wool, non-shrink,

machine washable” label

30°-60°

30°-40°

Prewash

Wash at 30°-60°C

3 rinses

Short spin

Drain

For emptying out the last

rinse water of the

programmes with the

anticrease option .

Draining of water

3 rinses with fabric softener

Short spin

This programme can be

used for rinsing hand

washed garments.

Short spin

Drain and short spin

Separate spin for synthetics,

delicates and wool

132978280 gb.qxd 17/01/2007 10:05 Pagina 14

ENGLISH

Bodywork

Clean the outside of the machine with soap and

water only. Rinse with clean water and dry with a

soft cloth.

Important: do not use methylated spirits, solvents

or similar products to clean the bodywork.

Door seal

Check from time to time the door seal and eliminate

eventual possible objects that could be trapped in

the fold.

Detergent dispenser drawer

After a while, detergents and fabric softeners leave

deposits in the drawer.

Clean the drawer from time to time by rinsing it

under a running tap. To remove the drawer from the

machine, press the button in the rear left-hand

corner.

To facilitate cleaning, the top part of the additive

compartments can be removed.

Detergent can also accumulate inside the drawer

recess: clean it with an old toothbrush. Refit the

drawer after cleaning.

P0038

C0098

C0097

P1050

Drain pump

The pump should be inspected if

• the machine does not empty and/or spin

• the machine makes an unusual noise during

draining due to objects such as safety pins, coins

etc. blocking the pump.

Proceed as follows:

• Disconnect the appliance.

• If necessary wait until the water has cooled down.

• Open the pump door.

• Place a container close to the pump to collect any

spillage.

• Release the emergency emptying hose, place it in

the container and remove its cap.

• When no more water comes out, unscrew the

pump cover and remove it. Always keep a rag

nearby to dry up spillage of water when removing

the pump.

• Remove any objects from the pump impeller by

rotating it.

P1115

P1114

Maintenance

132978280 gb.qxd 17/01/2007 10:05 Pagina 15

• Put the cap back on the emergency emptying

hose and place the latter back in its seat.

• Screw the pump fully in.

• Close the pump door.

Water inlet filter

If you notice that the machine is taking longer to fill,

check that the filter in the water inlet hose is not

blocked.

Turn off the water tap.

Unscrew the hose from the tap.

Clean the filter with a stiff brush.

Screw the hose back onto the tap.

Emergency emptying out

If the water is not discharged, proceed as follows to

empty out the machine:

• pull out the plug from the power socket;

• close the water tap;

• if necessary, wait until the water has cooled down;

• open the pump door;

• place a bowl on the floor and place the end of the

emergency emptying hose into the bowl. Remove

its cap. The water should drain by gravity into the

bowl. When the bowl is full, put the cap back on

the hose. Empty the bowl. Repeat the procedure

until water stops flowing out;

P1090

P1117

• clean the pump if necessary as previously

described;

• replace the emergency emptying hose in its seat

after having plugged it;

• screw the pump again and close the door.

Frost precautions

If the machine is installed in a place where the

temperature could drop below 0°C, proceed as

follows:

• Remove the plug from the socket.

• Close the water tap and unscrew the water inlet

hose from the tap.

• Place the end of the emergency emptying hose

and that of the inlet hose in a bowl placed on the

floor and let water drain out.

• Screw the water inlet hose back on and reposition

the emergency emptying hose after having put the

cap on again.

By doing this, any water remaining in the machine is

removed, avoiding the formation of ice and,

consequently, breakage of the affected parts.

When you use the machine again, make sure that

the ambient temperature is above 0°C.

Important!

Every time you drain the water through the

emergency emptying hose you must pour 2 litres of

water into the main wash compartment of the

detergent drawer and then run the drain programme

“P”. This will activate the ECO valve avoiding that

part of the detergent remains unused at next

washing.

132978280 gb.qxd 17/01/2007 10:05 Pagina 16

ENGLISH

Something not working?

Problems which you can resolve yourself.

Problem Possible cause

• The machine does not start up:

• The door is not firmly closed.

• The machine is not plugged in or there is no power

at the socket.

• The main fuse has blown.

• The programme selector dial is not positioned

correctly and it has not been pulled out.

• The machine does not fill:

• The water tap is closed.

• The inlet hose is squashed or kinked.

• The filter in the inlet hose is blocked.

• The door is not properly closed.

• The machine fills then empties

immediately:

• The end of the drain hose is too low. Refer to

relevant paragraph in “water drainage” section.

• The machine does not empty and/or

does not spin:

• The drain hose is squashed or kinked.

• A gentle programme with option has been

performed.

• The drain pump is clogged.

• There is water on the floor:

• Too much detergent or unsuitable detergent

(creates too much foam) has been used.

• Check whether there are any leaks from one of the

inlet hose fittings. It is not always easy to see this

as the water runs down the hose; check to see if it

is damp.

• The drain hose is damaged.

• The drain pump has not been properly screwed on

after cleaning.

• The cap on the emergency emptying hose has not

been replaced after cleaning the pump.

• Unsatisfactory washing results:

• Too little detergent or unsuitable detergent has

been used.

• Stubborn stains have not been treated prior to

washing.

• The correct temperature was not selected.

• Excessive laundry load.

• The machine vibrates or is noisy:

• The transit bolts and packing have not been

removed.

• The support feet have not been adjusted.

• The laundry is not evenly distributed in the drum.

• Maybe there is very little laundry in the drum.

132978280 gb.qxd 17/01/2007 10:05 Pagina 17

If you are unable to identify or solve the problem,

contact our service centre. Before telephoning,

make a note of the model, serial number and

purchase date of your machine: the Service Centre

will require this information.

Mod. ..........

Prod. No. ...........

Ser. No. .........

. ......

....

. N

. .........

. No

. .........

P0042 BD

Problem Possible cause

• Water is not visible in the machine:

• The machine, which is the result of modern

technology, runs in a very economical way with

low water consumption. Performance is

nevertheless excellent.

• The door will not open:

• Spinning starts late or the machine

does not spin:

• The electronic unbalance detection device has cut

in because the laundry is not evenly distributed in

the drum. The laundry is redistributed by reverse

rotation of the drum. This may happen several

times before the unbalance disappears and

normal spinning can resume. If, after 6 minutes,

the laundry is still not evenly distributed in the

drum, the machine will not spin. In this case,

redistribute the load manually and select the spin

programme.

• The programme is still running.

• The door lock has not been released.

• There is water in the drum.

132978280 gb.qxd 17/01/2007 10:05 Pagina 18

ëÓ‰ÂÊ‡ÌËÂ

ì‚‡Ê‡ÂÏ˚È ÔÓÍÛÔ‡ÚÂÎ¸!

èÓÒËÏ ‚‡Ò ‚ÌËÏ‡ÚÂÎ¸ÌÓ ËÁÛ˜ËÚ¸ ‰‡ÌÌÓÂ ÛÍÓ‚Ó‰ÒÚ‚Ó ÔÓ ˝ÍÒÔÎÛ‡Ú‡ˆËË Ë Ó·‡ÚËÚ¸ ÓÒÓ·ÂÌÌÓÂ

‚ÌËÏ‡ÌËÂ Ì‡ ÔË‚Â‰ﬁÌÌ˚Â Ì‡ ÔÂ‚˚ı ÒÚ‡ÌËˆ‡ı Ò‚Â‰ÂÌËﬂ ÔÓ ·ÂÁÓÔ‡ÒÌÓÒÚË.

êÂÍÓÏÂÌ‰ÛÂÏ ‚‡Ï ÒÓı‡ÌËÚ¸ ˝ÚÓ ÛÍÓ‚Ó‰ÒÚ‚Ó ‰Îﬂ ÔÓÎ¸ÁÓ‚‡ÌËﬂ ËÏ ‚ ·Û‰Û˘ÂÏ Ë ÔÂÂ‰‡Ú¸ Â„Ó

‚ÓÁÏÓÊÌ˚Ï ·Û‰Û˘ËÏ ‚Î‡‰ÂÎ¸ˆ‡Ï.

èÓ‚ÂÊ‰ÂÌËﬂ ‚Ó ‚ÂÏﬂ ÔÂÂ‚ÓÁÍË

ç‡¯ ‚ÍÎ‡‰ ‚ Á‡˘ËÚÛ ÓÍÛÊ‡˛˘ÂÈ ÒÂ‰˚: Ï˚

ËÒÔÓÎ¸ÁÛÂÏ ÔÓ‚ÚÓÌÓ ÔÂÂ‡·ÓÚ‡ÌÌÛ˛ ·ÛÏ‡„Û.

ëÓ‰ÂÊ‡ÌËÂ

ì‚‡Ê‡ÂÏ˚È ÔÓÍÛÔ‡ÚÂÎ¸!

èÓ‚ÂÊ‰ÂÌËﬂ ‚Ó ‚ÂÏﬂ ÔÂÂ‚ÓÁÍË

ê‡ÒÔ‡ÍÓ‚‡‚ Ï‡¯ËÌÛ, ÔÓ‚Â¸ÚÂ Âﬁ ÒÓı‡ÌÌÓÒÚ¸. Ç ÒÎÛ˜‡Â ÒÓÏÌÂÌËÈ ÌÂ ‚ÍÎ˛˜‡ÈÚÂ Âﬁ Ë Ó·‡ÚËÚÂÒ¸ ‚

ëÂ‚ËÒÌ˚È ˆÂÌÚ.

ç‡¯ ‚ÍÎ‡‰ ‚ Á‡˘ËÚÛ ÓÍÛÊ‡˛˘ÂÈ ÒÂ‰˚: Ï˚

ËÒÔÓÎ¸ÁÛÂÏ ÔÓ‚ÚÓÌÓ ÔÂÂ‡·ÓÚ‡ÌÌÛ˛ ·ÛÏ‡„Û.

ëÓ‰ÂÊ‡ÌËÂ

ì‚‡Ê‡ÂÏ˚È ÔÓÍÛÔ‡ÚÂÎ¸!

èÓ‚ÂÊ‰ÂÌËﬂ ‚Ó ‚ÂÏﬂ ÔÂÂ‚ÓÁÍË

é·ÓÁÌ‡˜ÂÌËﬂ, ÍÓÚÓ˚Â ‚˚ ‚ÒÚÂÚËÚÂ ﬂ‰ÓÏ Ò ÌÂÍÓÚÓ˚ÏË Ô‡‡„‡Ù‡ÏË ÛÍÓ‚Ó‰ÒÚ‚‡ ËÏÂ˛Ú

ÒÎÂ‰Û˛˘ÂÂ ÁÌ‡˜ÂÌËÂ:

èÂ‰ÛÔÂÊ‰‡˛˘ËÈ ÚÂÛ„ÓÎ¸ÌËÍ ÔÓ‰˜ﬁÍË‚‡ÂÚ Ò‚Â‰ÂÌËﬂ, ÍÓÚÓ˚Â ˜ÂÁ‚˚˜‡ÈÌÓ ‚‡ÊÌ˚ ‰Îﬂ

‚‡¯ÂÈ ·ÂÁÓÔ‡ÒÌÓÒÚË ËÎË Ô‡‚ËÎ¸ÌÓÈ ˝ÍÒÔÎÛ‡Ú‡ˆËË ÔË·Ó‡.

é·ÓÁÌ‡˜ÂÌÌ˚Â ˝ÚËÏ ÒËÏ‚ÓÎÓÏ Ò‚Â‰ÂÌËﬂ ÔÂ‰ÓÒÚ‡‚Îﬂ˛Ú ‰ÓÔÓÎÌËÚÂÎ¸ÌÛ˛ ËÌÙÓÏ‡ˆË˛ Ë

Ô‡ÍÚË˜Ì˚Â Ò‚Â‰ÂÌËﬂ ÔÓ ˝ÍÒÔÎÛ‡Ú‡ˆËË ÔË·Ó‡.

ë‚Â‰ÂÌËﬂ Ë ËÌÙÓÏ‡ˆËﬂ ÔÓ ˝ÍÓÌÓÏÌÓÏÛ Ë ˝ÍÓÎÓ„Ë˜ÌÓÏÛ ËÒÔÓÎ¸ÁÓ‚‡ÌË˛ Ï‡¯ËÌ˚ Ó·ÓÁÌ‡˜ÂÌ˚

‰‡ÌÌ˚Ï ÒËÏ‚ÓÎÓÏ.

ç‡¯ ‚ÍÎ‡‰ ‚ Á‡˘ËÚÛ ÓÍÛÊ‡˛˘ÂÈ ÒÂ‰˚: Ï˚

ËÒÔÓÎ¸ÁÛÂÏ ÔÓ‚ÚÓÌÓ ÔÂÂ‡·ÓÚ‡ÌÌÛ˛ ·ÛÏ‡„Û.

ëÓ‰ÂÊ‡ÌËÂ

ì‚‡Ê‡ÂÏ˚È ÔÓÍÛÔ‡ÚÂÎ¸!

èÓ‚ÂÊ‰ÂÌËﬂ ‚Ó ‚ÂÏﬂ ÔÂÂ‚ÓÁÍË

ç‡¯ ‚ÍÎ‡‰ ‚ Á‡˘ËÚÛ ÓÍÛÊ‡˛˘ÂÈ ÒÂ‰˚: Ï˚

ËÒÔÓÎ¸ÁÛÂÏ ÔÓ‚ÚÓÌÓ ÔÂÂ‡·ÓÚ‡ÌÌÛ˛ ·ÛÏ‡„Û.

ùÍÒÔÎÛ‡Ú‡ˆËﬂ 26

36-37

SoderΩanie

Ukazaniå po bezopasnoj

™kspluatacii maßiny 20-21

éı‡Ì‡ ÓÍÛÊ‡˛˘ÂÈ ÒÂ‰˚

êÂÍÓÏÂÌ‰‡ˆËË ÔÓ Óı‡ÌÂ

ÓÍÛÊ‡˛˘ÂÈ ÒÂ‰˚

Ustanovka

ê‡ÒÔ‡ÍÓ‚Í‡ 23

ê‡ÒÔÓÎÓÊÂÌËÂ 23

èÓ‰ÍÎ˛˜ÂÌËÂ Ï‡¯ËÌ˚ Í ‚Ó‰ÓÔÓ‚Ó‰Û 23

èÓ‰ÍÎ˛˜ÂÌËÂ Í Í‡Ì‡ÎËÁ‡ˆËË 24

èÓ‰ÍÎ˛˜ÂÌËÂ Í ˝ÎÂÍÚÓÒÂÚË 24

Vaßa novaå stiralwnaå

maßina

Opisanie maßiny

ÑÓÁ‡ÚÓ moæxego sredstva 25

ùÍÒÔÎÛ‡Ú‡ˆËﬂ 26

è‡ÌÂÎ¸ ÛÔ‡‚ÎÂÌËﬂ 26

êÂÍÓÏÂÌ‰‡ˆËË ‰Îﬂ ÒÚËÍË 27

ëÓÚËÓ‚Í‡ ·ÂÎ¸ﬂ 27

íÂÏÔÂ‡ÚÛ‡ 27

èÂÂ‰ Á‡„ÛÁÍÓÈ ·ÂÎ¸ﬂ 27

å‡ÍÒËÏ‡Î¸Ì‡ﬂ Á‡„ÛÁÍ‡ 27

ÇÂÒ ·ÂÎ¸ﬂ 27

Ç˚‚Â‰ÂÌËÂ ÔﬂÚÂÌ 27

åÓ˛˘ËÂ ÒÂ‰ÒÚ‚‡ Ë ‰Ó·‡‚ÍË 28

äÓÎË˜ÂÒÚ‚Ó ËÒÔÓÎ¸ÁÛÂÏÓ„Ó

ÏÓ˛˘Â„Ó ÒÂ‰ÒÚ‚‡ 28

Kak polwzovatwså maßinoj 29-30

Ètiketki na belwe s

ukazaniåmi po stirke 31

í‡·ÎËˆ‡ ÔÓ„‡ÏÏ 32-33

Âistka korpusa maßiny 34

Uplotnenie læka 34

Âistka dozatora stiralwnogo poroßka 34

óËÒÚÍ‡ ÁÓÌ˚ ÒÎË‚‡ 34

Âistka filwtra nalivnogo ßlanga 35

Avarijnyj sliv vody 35

èÂ‰ÓÚ‚‡˘ÂÌËÂ Á‡ÏÂÁ‡ÌËﬂ 35

Esli maßina

ne rabotaet

36-37

RUSSKIJ

Ustanovka i obsluΩivanie

ispolwzovaniå v domaßnem hozåjstve;

po™tomu, ee nado ispolwzovatw imenno tak,

kak ukazano v dannoj instrukcii. Esli

maßinu ispolwzuæt dlå inyh celej, to estw

stva.

• Tolwko specialist imeet pravo ustanovitw

takΩe, pri neobhodimosti, otkrytw i nala-

ditw ee mehanizm.

Esli ™to sdelaete Vy sami, to suxestvuet

opasnostw plohogo funkcionirovaniå

maßiny. Èto moΩet privesti k travmam ili

k povreΩdeniæ obstanovki pomexeniå, gde

ustanovlena maßina.

• Remont dolΩen proizvoditwså

pytajtesw samostoåtelwno remontirovatw

maßinu!

• Maßina ne dolΩna stoåtw na ßlangah:

nalivnoj i slivnoj ßlangi dolΩny leΩatw

svobodno, bez peregibov, a sama maßina

nosti.

ùÍÒÔÎÛ‡Ú‡ˆËﬂ ÒÚË‡Î¸ÌÓÈ

Ï‡¯ËÌ˚

• Polwzovatwså stiralwnoj maßinoj mogut tolwko

maßiny moΩet silwno nagrevatwså. Po™tomu, vo

vremå raboty maßiny vozle nee ne dolΩny

nahoditwså deti.

• Ne peregruΩajte maßinu belwem (sm. razdel

“Maksimalwnoe zapolnenie”).

• ëÚË‡ÈÚÂ ÚÓÎ¸ÍÓ ·ÂÎ¸ﬁ, ÔÂ‰Ì‡ÁÌ‡˜ÂÌÌÓÂ ‰Îﬂ

Ï‡¯ËÌÌÓÈ ÒÚËÍË. ëÎÂ‰ÛÈÚÂ ËÌÒÚÛÍˆËﬂÏ Ì‡

˝ÚËÍÂÚÍÂ Í‡Ê‰ÓÈ ‚Â˘Ë.

goe belwe i povreditw mehanizm maßiny.

• Takie predmety, kak monety, gvozdi, zakolki,

bulavki, igolki, mogut serwezno povreditw

maßinu. Po™tomu pered zagruzkoj belwå v

maßinu nuΩno proveritw, pusty li karmany

stiraemyh izdelij. Zastegnite vse pugovicy i

molnii.

• Melkie predmety, takie kak, naprimer,

oni mogut zastråtw meΩdu bakom i baraba-

nom.

• Pri stirke belwå sledujte ukazaniåm proizvo-

ditelå stiralwnyh poroßkov i sredstv polo-

skaniå. àÒÔÓÎ¸ÁÛÈÚÂ ÚÓÎ¸ÍÓ ÒÚË‡Î¸Ì˚Â

ÔÓÓ¯ÍË Ò ÌÓÏËÓ‚‡ÌÌ˚Ï ÔÂÌÓÓ·‡ÁÓ‚‡ÌËÂÏ, ÚÓ

ÂÒÚ¸ ÔÓÓ¯ÍË, ÔÂ‰Ì‡ÁÌ‡˜ÂÌÌ˚Â ‰Îﬂ

‡‚ÚÓÏ‡ÚË˜ÂÒÍÓÈ Ï‡¯ËÌÌÓÈ ÒÚËÍË.

èÂÂ‰ÓÁËÓ‚Í‡ ÏÓ˛˘Ëı ÒÂ‰ÒÚ‚ ÏÓÊÂÚ ÔË‚ÂÒÚË

Í ÒÂ¸ﬁÁÌ˚Ï ÔÓ‚ÂÊ‰ÂÌËﬂÏ, Í‡Í ·ÂÎ¸ﬂ, Ú‡Í Ë

Ï‡¯ËÌ˚.

Ne proizvodite otbelivanie ili okrasku

belwå v stiralwnoj maßine. Te vexi, dlå

udaleniå påten s kotoryh byli ispolwzo-

propoloskatw v vode pered ih zagruzkoj v

maßinu.

ëÓ„Î‡ÒÌÓ á‡ÍÓÌÛ “é Á‡˘ËÚÂ Ô‡‚

ÔÓÚÂ·ËÚÂÎÂÈ”, ÔË Ì‡Û¯ÂÌËË

ÛÒÚ‡ÌÓ‚ÎÂÌÌ˚ı Ô‡‚ËÎ ustanovki

i ˝ÍÒÔÎÛ‡Ú‡ˆËË Û˘Â·, ÔË˜ËÌﬁÌÌ˚È

‚ÒÎÂ‰ÒÚ‚ËÂ Ú‡ÍËı Ì‡Û¯ÂÌËÈ, ÌÂ

‚ÓÁÏÂ˘‡ÂÚÒﬂ, ÚÂ·Ó‚‡ÌËﬂ ÔÓ ÌÂ‰ÓÒÚ‡ÚÍ‡Ï,

‚ÓÁÌËÍ¯ËÏ ‚ ÂÁÛÎ¸Ú‡ÚÂ Ú‡ÍËı Ì‡Û¯ÂÌËÈ,

ÌÂ Û‰Ó‚ÎÂÚ‚Óﬂ˛ÚÒﬂ.

• èÂÂ‰ ÓÚÍ˚ÚËÂÏ Á‡„ÛÁÓ˜ÌÓ„Ó Î˛Í‡

ÌÂÓ·ıÓ‰ËÏÓ Í‡Ê‰˚È ‡Á ÔÓ‚ÂﬂÚ¸ ÓÚÒÛÚÒÚ‚ËÂ

‚Ó‰˚ ‚ ·‡‡·‡ÌÂ. ÖÒÎË ‚Ó‰‡ ÌÂ ÒÎËÎ‡Ò¸, ÚÓ

ÒÎÂ‰ÛÈÚÂ ÛÍ‡Á‡ÌËﬂÏ ÛÍÓ‚Ó‰ÒÚ‚‡ ÔÓ

˝ÍÒÔÎÛ‡Ú‡ˆËË.

dolΩen bytw priotkrytym. Togda uplotnenie

™lasti©nosti.

Dlå polwzovatelå

Tot, kto posle Vas budet eæ polwzovatwså, dolΩen imetw vozmoΩnostw oznakomitwså s maßinoj i ee funk-

ciåmi, a takΩe s ukazaniåmi po ee bezopasnoj ™kspluatacii.

Ukazaniå po bezopasnoj ™kspluatacii maßiny

La pagina sta caricando ...

Zanussi FA1023 Manuale utente

Marca: Zanussi

Modello: FA1023

Categoria: Lavatrici

Tipo: Manuale utente

Questo manuale è adatto anche per

fa 1023

Scarica il pdf

rapporto

in altre lingue

English: Zanussi FA1023 User manual

Zanussi FA1023 Manuale utente

Questo manuale è adatto anche per

Zanussi FA1023 Manuale utente

in altre lingue

Documenti correlati

Altri documenti