Rega Apollo Manuale utente

compact disc player

2

user manual

English

3

English

Français

Deutsch

Italiano

Español

3

19

35

51

67

Português

Nederlands

Dansk

Svenska

Polski

83

99

115

131

147

Recommended ambient operating temperature 5 to 35°C. Allow adequate air circulation

around the whole of the Apollo CD player especially when running for extended periods

of time. This unit is intended for use in moderate climates. To reduce the risk of re, electric

shock or product damage, do not expose the unit to rain, moisture, dripping or splashing

and ensure that no objects lled with liquids, such as vases, shall be placed upon it. Do not

remove the case covers. There are no user serviceable parts inside. No naked ame sources,

such as lit candles, should be placed on the apparatus. Refer the servicing to qualied Rega

dealers only.

warning

English

4

The laser component in this product is capable of emitting radiation exceeding the limit for Class 1.

CLASS 1

LASER PRODUCT

This appliance is classied as a CLASS 1 LASER product.

To the best of our understanding, there have only ever been ve large multinational

companies with the technology and knowledge base to develop the remarkably complex

operating software for CD players. Development of this software and chip-sets to operate

CD transports was generally curtailed in the 1990’s. After this time, all development eort

was directed towards the design of DVD players and other advanced formats.

Rega and other specialist hi- manufacturers were totally reliant on companies like Sony and

Philips to supply transports and their operating chip-sets. In 2003 Sony stopped supply and

sent the specialist hi- industry into a urry of activity in search of feasible alternatives.

Many manufacturers were able to resource their supply from Far Eastern companies.

Rega worked hard to locate a British software company who were developing a totally

new disc operating system. A system, which was highly advanced, even in the early

development stages.

Rega was the only manufacturer to develop the unique new disc operating system. Due to

ever increasing computer processing power and memory capacity, it was possible to build

in an enormous increase in memory capability. This allowed the data retrieval to meet the

original CD ‘Red Book’ specications without compromise to the musical performance.

All previous chip-sets were unable to achieve this due to their limited memory and signal

processing capacity.

Rega’s British designed chip-set delivers superior error correction and signal processing

capacity. This enhances the sonic performance of the player and delivers a unique level of

musicality. The Apollo is the latest version of Rega’s bestselling CD player housed in a brand

new case. The Apollo’s unique sound harmonises with the rest of our products and will

integrate into any music system seamlessly.

We hope you enjoy this very special CD player. We have spent a very long time creating it,

drawing on more than 40 years of experience in specialist hi- manufacturing.

introduction

English

5

English

6

Ensure the operating voltage of the Apollo (stated on the rear) is the same as that of your

local power supply.

The Apollo will work well on most surfaces, such as a shelf, table, stand or wall bracket.

The Apollo should be placed to allow adequate access to the lid and aperture. If access is

limited, there is a danger of scratching the CD when placing it on the ball chuck system.

installation

A standard interconnect provides entirely satisfactory performance for the Apollo

CD player.

Audiophiles may wish to upgrade to a more exotic interconnect at a later stage, such as

Rega’s Couple 2.

interconnects

Outputs are made via RCA (Phono) type connector and the ‘Toslink’ optical connection.

The sockets on the Rega products are clearly marked to help identify them.

Line Out: For output to an audio amplier.

Right: Always the lower row and marked in RED.

Left: Always the upper row and marked in WHITE.

! CAUTION: SOME AMPLIFIERS AND INTERCONNECTS HAVE BLACK COLOUR

CODING FOR THE LEFT CHANNEL !

Digital Out: For output to digital components such as DAC, PC or Bluetooth transmitter.

Always check that the connecting component is compatible with 44.1k coaxial S/PDIF input.

IMPORTANT: ALWAYS TURN OFF THE PLAYER WHEN CHANGING LEADS.

output connections

English

7

rear panel connections

in use

power switch power on (illuminated)

display control functions

English

8

powering up

in use

track number cd symbol time music calendar

play/pause shufe program repeat mode(s) mp3/wma info

English

9

loading a disc

After the disc has been initialised, select the PLAY function on either the remote or front

panel. The disc will start playing from track 1 of the rst album on the disc regardless of

disc content.

The display will show: The play symbol, track number and time.

NB: If playing CDR’s, they must be recorded at no greater than 8x as we cannot

guarantee the readability of the disc.

Once playing the CD, you can then activate the PAUSE function by pressing the PAUSE

button on the remote or pressing the PLAY/PAUSE button on the front panel. PAUSE will

then hold track position until the PLAY/PAUSE button is pressed on either the remote or

front panel.

Once PLAY is activated again, the display shows all information about the track and will

continue to play from the held position.

playing or pausing a cd audio disc

English

10

MP3 and WMA will show the name of the track, track number and time. It will also

show the album (index) number.

playing or pausing mp3/wma discs

Pressing the STOP button on either the remote or front panel will stop the current action

and return the player back to track 1 album 1.

Whilst in ‘stopping mode’ the player locks out all other functions.

stopping the player

Pressing once while the disc is playing, the current track will start again from the beginning.

Pressing again in quick succession will take you to the start of the previous track.

track previous

Pressing once while the disc is playing, the next track will start from the beginning.

Pressing again takes you to the beginning of the next track after that, etc.

If the TRACK buttons are pressed in PAUSE and STOP modes, a specic track can be

selected, and when the PLAY button is pressed, the selected track will start from the

beginning.

track next

English

11

Program

DAC

Input

Clear Time

Repeat

Mute

Shuffle

Input

Album Volume

OK

addtional cd functions

program

clear

repeat

not used

track previous

search backwards

album up

album down

time

shufe

track next

play/pause/ok

search forwards

stop

volume up *

volume down *

input selection *

mute *

* amplier functions

activated by the remote

English

12

The remote control supplied as standard is specic to this model and is necessary to

access the advanced functions of the player.

The Rega Solaris system remote will also control all the basic functions of the Apollo

(sold separately).

remote functions

The PLAY and PAUSE buttons on the remote control are the same as PLAY/PAUSE on the

front panel except they have been separated.

STOP, TRACK PREVIOUS, and TRACK NEXT work in the same way as on the front panel of

the player (See page 10).

play, pause, stop, track previous/next

Pressing the SEARCH BACK/SEARCH FORWARD buttons in PLAY mode searches the disc

at high speed, allowing you to nd a specic position in a track.

In PAUSE mode, the track is scanned at a higher speed without playing music.

To stop the search, press the SEARCH BACK/SEARCH FORWARD button again.

search back/forward

Pressing the ALBUM UP/ALBUM DOWN buttons allows you to skip to the next album

or previous when playing an MP3 or WMA disc.

album up/down

English

13

shufe

To play tracks in a random order, press SHUFFLE then press PLAY.

To play tracks in a random order whilst in PLAY mode, press the SHUFFLE button once:

RANDOM will be highlighted and the tracks will be played in a sequence generated by

the player.

To cancel shue play, press the SHUFFLE button again. The CD player will continue to

play in the discs original sequence after the current track being played has nished.

repeat

English

14

While playing a disc, the display shows the PLAY symbol, current track number, playing time

and the music calendar.

The track numbers in the music calendar disappear after they are played.

The TEXT button on the remote can be pressed to show information on WMA and MP3

les (this feature is only available when using the Solaris system remote).

display info whilst playing a disc

current track number time remaining on the track music calendar

This will show the track being played i.e. if its playing track 01 the calendar will only show 1.

The music calendar is active for CDA (WAV) Red Book and is not active for WMA, MP3 &

MIX.

music calendar

Pressing the DISPLAY button on the remote will turn o the display, pressing it again will

turn it back on (this feature is only available when using the Solaris system remote).

turning off the display

English

15

music calendar

displaying remaining time

Checking the remaining playing time of the track is done by pressing the TIME button on

the remote whilst the CD is playing. This button can be used to alternate between the track

playing time and the time remaining on the track.

current track number time remaining

on the track

music calendar

NB: The time function does not work for MP3, WMA or MIX les.

creating a program

memory location number

track number

programmed

The program function allows you to program up to 99 tracks from a disc or album in any

order you specify.

English

16

1) Press PROGRAM on the remote handset to create your new programme list: PROGRAM

will appear on the display.

2) When the rst program location appears, you can enter the required track number.

Continue this until your programme is complete up to a maximum of 99 locations.

3) Use the TRACK NEXT and TRACK PREVIOUS buttons to enter the track numbers.

Press the OK button twice after each track is selected.

4) If you enter the wrong track number it can be deleted by pressing the CLEAR button.

This will clear the last location entered.

5) Press PROGRAM again to nish programming.

6) Pressing PLAY will activate your programme. The display now shows the rst track that

was entered into your programme.

7) If PROGRAM is pressed again, you can enter further tracks from the last location in your

programme. This can be done either when the Apollo is playing your programme or when

stopped.

8) To clear your programme, make sure the Apollo has stopped, then press the CLEAR

button.

creating a program

NB: The program function does not work for MP3, WMA or MIX les.

English

17

the handling of cds

To keep the CD clean, handle by its edge only. Do not touch the surface; natural oils from

skin can stop the laser from reading the disc accurately.

Do not expose the disc to bright sunlight, leave near hot places such as electrical equipment

or in a parked car. Excess heat can cause the disc to warp.

Do not use any cleaning uids or anti-static sprays on the disc as they could damage the disc

or the player.

Store the disc in its case when not in use to prevent it from becoming scratched.

care of player

warning

misuse of the player could invalidate your rega warranty.

Do not touch the lens or electronic parts inside the player. It is a very sensitive optical device

and is easily damaged. If dirt gets on the lens, the player may not work.

Do not attempt to clean the lens or lubricate in any way. Fluids and abrasive

materials could easily damage the lens. Your Rega dealer will be trained in cleaning

this component, but provided you take care with your player, it should not need any

servicing.

Do not leave the lid open, as dust will get into the player and onto the lens.

Do not drop objects into the player. If any objects fall into the player, switch o and

disconnect from the mains supply immediately and contact your Rega dealer.

Do not open the case or stick implements into it to retrieve the item.

If you are not going to use the player for a long time, we recommend that you switch it o.

Always pull the plug itself when disconnecting from the wall socket, never the cord.

English

18

apollo specications

Laser Semiconductor laser

Wavelength 790nm

Line Output Maximum Level 2.15V (minimum load impedance 10kΩ)

Digital Output Maximum Level 0.5V (load impedance 75Ω)

Digital Sampling Frequency 44.1kHz

Power Consumption:

13.5Watts at 230V (minimum 190V maximum 253V) @ 50/60Hz

13.5Watts at 115V (minimum 95V maximum 126.5V) @ 50/60Hz

Dimensions:

215Wx90Hx340D

Required Space for operation (lid fully open):

215Wx165Hx340D

Mains fuses:

230V / 20mm / T250mA L

115V / 20mm / T500mA L

CDP Remote Batteries:

AAA (1.5) x 2

WARNING: BATTERIES MAY EXPLODE OR LEAK IF RECHARGED,

DISPOSED OF IN FIRE OR DISECTED.

mode d’emploi

Français

19

English

Français

Deutsch

Italiano

Español

3

19

35

51

67

Português

Nederlands

Dansk

Svenska

Polski

83

99

115

131

147

Français

20

Température ambiante de fonctionnement 5 à 35°C. Laissez une libre circulation d’air autour

de votre lecteur CD Apollo, surtout lors de longues séances d’utilisation. Cet appareil est

prévu pour des climats tempérés. An d’écarter le risque d’incendie ou de choc électrique,

n’exposez pas cet appareil à l’humidité: assurez-vous de ne mettre aucun récipient contenant

des liquides tel qu’un vase sur le lecteur. N’ouvrez pas le boîtier. Aucune intervention de

dépannage ne peut être entreprise par l’utilisateur. Ne posez aucune amme nue – une

bougie par exemple – sur l’appareil. Contactez votre revendeur Rega pour toute intervention

technique.

warning

Le composant laser dans ce produit est capable d’émettre des rayons excédant les limites Classe 1.

CLASS 1

LASER PRODUCT

Cet appareil est classé comme PRODUIT LASER CLASSE 1.

La pagina sta caricando ...

Rega Apollo Manuale utente

Rega Apollo Manuale utente

in altre lingue

Altri documenti