ProLights Revolutionary full colour event battery table lamp Manuale utente

USER MANUAL

MANUALE UTENTE

IT - EN

REVOLUTIONARY FULL COLOR EVENT

BATTERY TABLE LAMP

TABLEDC

2

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the

characteristics stated in this instruction manual at any time and without prior notice.

All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it

REV.04-10/19

1

TABLEDC

TABLE OF CONTENTS

Safety

General instructions

Warnings and installation precautions

1 Introduction

1. 1 Description

1. 2 Technical specifications

1. 3 Operating elements and connections

2 Installation

2. 1 Mounting

3 Functions and settings

3. 1 Operation

3. 2 Basic setup

3. 3 Recharge

3. 4 Menu structure

3. 5 DMX addressing

3. 6 DMX mode

3. 7 DMX configuration

3. 8 Wireless setting

3. 9 Display setting

3. 10 IR setup

3. 11 Lamp setting

3. 12 Fixture information

3. 13 Wireless operation

3. 14 DMX channels

4 Maintenance

4. 1 Maintenance and cleaning the unit

2

3

5

6

7

8

9

10

11

12

13

16

TABLEDC

2

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with .

• Supply voltage of this product is DC24V; never connect directly to AC220V. Leave servicing to skilled

personnel only. Never make any modiﬁcations on the unit not described in this instruction manual,

otherwise you will risk an electric shock.

• Connection of the power adapter must be made to a power supply system ﬁtted with eﬃcient earth-

ing (Class I appliance according to standard EN 60598-1). It is, moreover, recommended to protect the

supply lines of the units from indirect contact and/or shorting to earth by using appropriately sized

residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualiﬁed electri-

cal installer. Check that the voltage correspond to those for which the unit is designed as given on the

electrical data label.

• This unit is not for home use, only professional applications.

• Never use the ﬁxture under the following conditions:

- in places subject to vibrations or bumps;

- in places subject to excessive humidity.

• Make certain that no inﬂammable liquids, water or metal objects enter the ﬁxture.

• Do not dismantle or modify the ﬁxture.

• All work must always be carried out by qualiﬁed technical personnel. Contact the nearest sales point for

an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation deﬁnitively, take it to a local recycling

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• If this device will be operated in any way diﬀerent to the one described in this manual, it may suﬀer

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning the projector, cut oﬀ power from the main supply.

• Always additionally secure the projector with the safety rope. When carrying out any work, always com-

ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country

in which the ﬁxture’s being used.

• Install the ﬁxture in a well ventilated place.

• Keep any inﬂammable material at a safe distance from the ﬁxture.

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

that their eﬀectiveness is impaired.

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ﬂashing light, may

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

• Do not touch the product’s housing when operating because it may be very hot.

• This product was designed and built strictly for the use indicated in this documentation. Any other use,

• not expressly indicated here, could compromise the good condition/operation of the product and/or

be a source of danger.

• We decline any liability deriving from improper use of the product.

3

TABLEDC

- 1 - INTRODUCTION

1.1 DESCRIPTION

TABLED is an ingenious product which oﬀers beautiful table lighting for events whilst keeping the atmos-

phere of the room. Based on a stunning aesthetic design, it is not only a stylish centerpiece but fast to

deploy and easy to use. With local control and wireless DMX, it can either act as a standalone table light or

be part of a spectacular event lighting package.

1.2 TECHNICAL SPECIFICATIONS

LIGHT SOURCE

• Source: 6x3 W + 6x1W RGB + Neutral White

• CT: NW 4.000K

• CRI: 80

• Source life expectancy: > 50.000 h

OPTICS

• Beam angle: 360° designed to light up standard 160/180 cm ceremony tables

DYNAMIC EFFECTS

• Static colour mode: selection of static colour

• Manual colour mode: manual adjustment of colour

BODY

• Hardware on-board: magnetic base

• Body: sturdy die-cast aluminium body conceived for long-time durability

• Body colour: mirror and white ﬁnishing

CONTROL

• Protocols: W-DMX

• DMX channels: 4 / 7 / 10 / 12 channel

• W-DMX: included, wireless solution receiver

• Display: black OLED high resolution display

• Firmware upgrade: yes, via USB - DMX interface (UPBOX1) not included

• IR: infrared sensor controlled by remote

ELECTRONICS

• Dimmer: linear 0 ~ 100% electronic dimmer

• Dimmer curves: 4 diﬀerent dimming curves available

• Strobe / shutter: 1 - 30 Hz, electronic

• Operating temperature: -10° ~ +45°

ELECTRICAL

• Power supply: DC 24 V - 1 A

• Power consumption (at 230 V): 8,8W

BATTERY

• Battery: 2,20 Ah - 14,8V lithium

• Estimated battery life in colour change mode up to: 14,5h

TABLEDC

4

• Estimated battery life in single colour mode up to: R: 19h - G: 17,5h - B: 17,5h - W: 17,5h

• Estimated battery life in full-mode up to: 9h

• Re-charge connection: power cable fast-charge in pelican case

• Re-charge time: 4h/max

• Battery status: shown on display

PHYSICAL

• Sospension and ﬁxing: magnetic base to attach on every metal surface

• Data connection: W-DMX receiver

• IP rating: 30

• Dimensions (WxHxD): 140x307x220mm

• Weight: 1,18kg

Fig.1

Technical drawing Tabled

Technical drawing Tabled-Pack

140

220

65

307

536

381

83

5

TABLEDC

1.3 OPERATING ELEMENTS AND CONNECTIONS

1. TOP LED & PCB with removable cover

2. Tube / extension - junction system for

connecting two pipes to extend the height,

and battery compartment.

3. Metal plate.

4. Display OLED with display and 4 button used

to access the control panel functions and

manage them.

5. LED

6. ON/OFF SWITCH.

7. Wireless receiver

8. Magnetic base for mounting on metal

surfaces

Fig.3

1

2

3

4

5

7

6

8

TABLEDC

6

- 2 - INSTALLATION

2.1 MOUNTING

TABLED can be placed on a solid ﬂoor with ﬁxing possibility through the magnetic base that can be placed

on the table or under the tablecloth.

Moreover, thanks to the joint system to connect 2 pipes, the height can be extended.

The location area should have enough stability to support at least 10 times the weight of the unit.

Please take care to respect all warnings regarding safety

Fig.3

PLATE

MAGNETIC BASE

BATTERY TUBE

LED & PCB

TOP COVER

7

TABLEDC

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Switch on the TABLED with the power switch. The unit is ready for operation and can be operated via a

DMX controller or it independently performs its show program in succession.

After operation, switch oﬀ the unit with the power switch.

3.2 BASIC SETUP

The TABLED has a OLED display and 4 buttons for access to the functions of the control panel (ﬁg. 5).

MENU ENTER UP DOWN

Used to access the menu or

to return a previous menu

option

Used to select and store the

current menu or confirm the

current function value or

option within a menu

Button to select the values

in ascending order of the

function

Button to select the values

in descending order of the

function

Fig.5 - Functions of the buttons

3.3 RECHARGE

To recharge TABLED:

• connect the unit to the special battery charger through the lower connector

• connect the battery charger to the power supply

NOTE - The charging time are 4 h and autonomy is 12h

TABLEDC

8

3.4 MENU STRUCTURE

MENU

1 CONNECT

ð

DMX Address

ð

001 - 512

ð

DMX mode

ð

BASIC 4 Ch

STANDARD 7 Ch

EXTENDED 10 Ch

ADVANCED 12 Ch

ð

Wireless

ð

Receive On/Off

ð

On

Oﬀ

Receive connect

ð

No

Yes

ð

IR Setting

ð

On

Off

2 SETUP

ð

Screen

ð

Backlight

ð

On

10s

20s

30s

ð

Key lock

ð

No

Yes

3 ADVANCED

ð

Dimmer mode

ð

Off

Dimmer 1

Dimmer 2

Dimmer 3

ð

White Balance

ð

Adjust

Oﬀ

ð

Adjust

ð

Red

ð

000 - 255

Green

ð

000 - 255

Blue

ð

000 - 255

ð

Factory Reload

ð

No

Yes

4 INFORMATIOJN

ð

Fixture time

ð

9999 H

Version

ð

V 1.0

5 STAND ALONE

ð

Sequence

ð

Show 1

ð

speed (1-100)

Show 2

Show 3

Show 4

9

TABLEDC

3.5 DMX ADDRESSING

To be able to operate the TABLED with a light controller, set the unit DMX start address for the ﬁrst DMX

channel. To set the start address refer to following procedure:

• Use the UP/DOWN button until the display reads [DMX Address] and then press the ENTER button to

conﬁrm

• Press the UP/DOWN button to select the value [d 1-512] and then press the ENTER button .

If e. g. address 33 on the controller is provided for controlling the function of the ﬁrst DMX channel, adjust

the start address 33 on the TABLED.

The other functions of the light eﬀect panel are then automatically assigned to the following addresses.

An example with the start address 33 is shown in the page 13.

DMX

Channels

number

Start address

(example)

Busy DMX

address

Next possible start address

for unit n°1

Next possible start address

for unit n°2

Next possible start address

for unit n°3

4 33 33-36 37 41 45

7 33 33-39 40 47 51

10 33 33-42 43 53 63

12 33 33-34 45 55 67

3.6 DMX MODE

To enter the DMX mode, follow these steps:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Connect icon, then press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select the DMX Address and press the ENTER key.

• Press the arrow keys to select the desired value (001-512).

• Press the ENTER key to conﬁrm the setting.

• Press the LEFT button repeatedly to exit the menu and save changes.

4 channels DMX configuration example

ð

Static

ð

Preset

ð

R

G

B

RG

RB

GB

RGB

W

ð

Manual Color

ð

R

ð

000 - 255

G

ð

000 - 255

B

ð

000 - 255

W

ð

000 - 255

TABLEDC

10

3.7 DMX CONFIGURATION

The TABLED has 5 DMX channel conﬁgurations which can be accessed from the control panel.

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Set icon, then press the ENTER button to enter

the next menu.

• Press the UP/DOWN button to scroll through the menu, select Users and press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select User Mode and press ENTER to conﬁrm

your choice.

• Use the UP/DOWN button to select the desired DMX channel conﬁguration (Basic, Standard, Extended),

then press the ENTER button to conﬁrm your choice.

• Press the LEFT button repeatedly to exit the menu and save changes.

The tables on page 18 show the mode of operation and their values DMX.

The unit is equipped with 3/5-pole XLR connections.

3.8 WIRELESS CONTROL SETTINGS

To enable wireless control mode, proceed as follows:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Connect icon, then press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Wireless and press ENTER.

• Press the UP/DOWN and LEFT/RIGHT buttons to select the desired value (001-512).

• Press the ENTER key to conﬁrm the setting.

To change the settings of wireless control, proceed as follows:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Set icon, then press the ENTER button to enter

the next menu.

• Press the UP/DOWN button to scroll through the menu, select Wireless Set, and press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to select the option proposed and press the ENTER button to conﬁrm your

choice.

- Receive - Disable/enable the DMX signal cable. Select OFF to deactivate or ON to activate the func-

tion.

- Reset Connect - Reset the wireless connection of the unit. Select OFF to deactivate or ON to activate

the function.

• Press the ENTER button to conﬁrm your choice.

• Press the LEFT button repeatedly to exit the menu and save changes.

3.9 DISPLAY SETTINGS

You can change the following parameters related to the display, following the same procedure:

• Press the ENTER button to access the main menu.

• Press the UP / DOWN keys to scroll the menu, select the Setup icon, then press the ENTER button to

enter the next menu.

• Press UP / DOWN to scroll through the menu, then select UI Set, and press the ENTER button to enter

the next menu.

• Press UP / DOWN to scroll through the menu, and then select one of the following settings for the dis-

play and press the ENTER key to display it.

- Back Light - Backlight display Auto Oﬀ. This feature allows you to automatically turn oﬀ the backlight

11

TABLEDC

after a speciﬁed time that you can set using the arrow buttons. To have the display always on select

Always On or set a value of On - 10s - 20s - 30s to turn oﬀ the display after the amount of time you

choose.

- Key Lock - Lock keys. With this function, you can lock the buttons on the control panel. If this function

is activated, the keys are automatically locked. To disable or temporarily disable the key lock func-

tion, press the buttons in the following order to regain access to menu commands: UP, DOWN, LEFT,

RIGHT, ENTER. Select ON to activate or OFF to disable.

• Press the ENTER button to conﬁrm your choice.

• Press the LEFT button repeatedly to exit the menu and save changes.

3.10 IR SETUP

To start up the IR recevitor refer to the following steps:

• Press the MENU button so many times until the display shows [IR Setup].

• Press the ENTER button to conﬁrm.

• Press the UP/DOWN button, select one of the programs [ON] or [OFF].

• Press the ENTER button for save the setting.

NOTE - Make sure to point the controller directly at the receiver on the product.3.14 WIRELESS SETTING

Fig.6

FADE

SOUND

SENSIT.

AUTO

MACRO

POWER

STROBESPEEDDIMMERMANUAL

AMBER

UV

RED

YELLOW

CYAN

MAGENTA

STATIC

DEEP

ORANGE

LIGHT

ORANGE

SEA

GREEN

AQUA

MARINE

WARM

WHITE

COLD

WHITE

GREEN

BLUE VIOLET PURPLE

WHITE

3.11 LAMP SETTINGS

Reload Default

Select this function to reset the unit to factory settings:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Set icon, then press the ENTER button to enter

the next menu.

• Press the UP/DOWN button to scroll through the menu, select Reload Default and press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to select the favourite recovery mode Basic Reload/Program Reload/ Private

Reload/All Reload, then press the ENTER button to conﬁrm.

• Press the UP/DOWN button to select ON or OFF, then press the ENTER button to conﬁrm.

3.12 FIXTURE INFORMATION

To view all the information on the device, proceed as follows:

• Press the ENTER button to access the main menu.

TABLEDC

12

Fig.7

• Press the UP/DOWN button to scroll the menu, select the icon Information, then press the ENTER but-

ton to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, then select one of the following information

and press the ENTER button to display it.

- Fixture Time - Through the Time Information function you can display the operating time of the

projector.

- Version - Through Software Version function you can display the currently installed software version.

• Press the LEFT button repeatedly to exit the menu.

3.13 OPERATION WITH WIFI

This mode allows you to wirelessly connect more TABLED units, all managed through a unit W-DMX tran-

smitter (sold separately).

DMX512 Controller

wireless

solution

13

TABLEDC

3.14 DMX CHANNELS

BASIC

4 Ch

STD

7 Ch

EXT

10 Ch

TABLED

FUNCTION

DMX

Value

1 1 1

Red

0~100% 000 - 255

2 2 2

Green

0~100% 000 - 255

3 3 3

Blue

0~100% 000 - 255

4 4 4

White

0~100% 000 - 255

5 5 Dimmer

000 - 255

6 6

Strobe

Open

Strobe slow to fast

Open

Random slow to fast

Open

000 - 015

016 - 115

116 - 135

136 - 235

236 - 255

7

Color presets

No Function

R 100% G 0~100% B 0

R 100%~0 G 100% B 0

R 0 G 100% B 0~100%

R 0 G 100%~0 B 100%

R 0~100% G 0 B 100%

R 100% G 0 B 100%~0

R 100% G 0~100% B 0~100%

R 100%~0 G 100%~0 B 100%

R 100% G 100% B 100%

Color 1

Color 2

Color 3

Color 4

Color 5

Color 6

Color 7

Color 8

Color 9

Color 10

Color 11

000 - 010

011 - 030

031 - 050

051 - 070

071 - 090

091 - 110

111 - 130

131 - 150

151 - 170

171 - 200

201 - 205

206 - 210

211 - 215

216 - 220

221 - 225

226 - 230

231 - 235

236 - 240

241 - 245

246 - 250

251 - 255

8

Effects

NO function

Effect 1

Effect 2

Effect 3

Effect 4

000 - 051

052 - 102

103 - 153

154 - 204

205 - 255

TABLEDC

14

BASIC

4 Ch

STD

7 Ch

EXT

10 Ch

FUNCTION

DMX

Value

9

Effect speed

Slow to speed 000 - 255

7 10

Dimmer fade

Preset dimmer speed from display menu

Dimmer snap to fade

000 - 000

001 - 255

ADV

12 Ch

FUNCTION

DMX

Value

1

Dimmer

0~100% 000 - 255

2

Strobe

Open

Strobe slow to fast

Open

Random slow to fast

Open

000 - 015

016 - 115

116 - 135

136 - 235

236 - 255

3

Dimmer

Dimmer Snap to fade 000 - 255

4

Red

0~100% 000 - 255

5

Green

0~100% 000 - 255

6

Blue

0~100% 000 - 255

7

White

0~100% 000 - 255

8

Color presets

No Function

R 100% G 0~100% B 0

R 100%~0 G 100% B 0

R 0 G 100% B 0~100%

R 0 G 100%~0 B 100%

R 0~100% G 0 B 100%

R 100% G 0 B 100%~0

R 100% G 0~100% B 0~100%

R 100%~0 G 100%~0 B 100%

R 100% G 100% B 100%

Color 1

Color 2

Color 3

Color 4

Color 5

Color 6

Color 7

000 - 010

011 - 030

031 - 050

051 - 070

071 - 090

091 - 110

111 - 130

131 - 150

151 - 170

171 - 200

201 - 205

206 - 210

211 - 215

216 - 220

221 - 225

226 - 230

231 - 235

15

TABLEDC

ADV

12 Ch

FUNCTION

DMX

Value

8

Color 8

Color 9

Color 10

Color 11

236 - 240

241 - 245

246 - 250

251 - 255

9

Effects

NO function

Effect 1

Effect 2

Effect 3

Effect 4

000 - 051

052 - 102

103 - 153

154 - 204

205 - 255

10

Effect speed

Slow to speed 000 - 255

11

Crossfade

0~100% 000 - 255

12

CTO on colors

0~100% 000 - 255

TABLEDC

16

- 4 - MAINTENANCE

4.1 MAINTENANCE AND CLEANING THE UNIT

• Make sure the area below the installation place is free from unwanted persons during setup.

• Switch oﬀ the unit, unplug the main cable and wait until the unit has cooled down.

• All screws used for installing the device and any of its parts should be tightly fastened and should not

be corroded.

• Housings, ﬁxations and installation spots (ceiling, trusses, suspensions) should be totally free from any

deformation.

• The main cables must be in impeccable condition and should be replaced immediately even when a

small problem is detected.

• It is recommended to clean the front at regular intervals, from impurities caused by dust, smoke, or

other particles to ensure that the light is radiated at maximum brightness. For cleaning, disconnect the

main plug from the socket. Use a soft, clean cloth moistened with a mild detergent. Then carefully wipe

the part dry. For cleaning other housing parts use only a soft, clean cloth. Never use a liquid, it might

penetrate the unit and cause damage to it.

17

TABLEDC

Battery Guide

New Lithium Battery Initialisation

Any new fixture containing a Lithium battery should be initialised when first purchased to maximise its battery life.

To do this:

1. Fully charge the unit for a minimum of 5 to 6 hours.

2. Fully discharge, then fully recharge the battery.

3. Repeat this cycle another 2 times for optimum battery life.

Maximizing Battery Performance

1. Lithium batteries perform best when in regular use. Long idle periods will reduce the battery life.

2. Recharge the battery at the earliest opportunity, leaving batteries discharged for long periods will reduce battery life.

3. Store units containing Lithium batteries at cool temperatures. High ambient temperatures significantly reduce the life

of a Lithium battery.

4. Disconnect power from the unit when charging is complete.

5. Do not use fixtures whilst charging.

Long term storage

1. Charge your fixture’s battery to around 50%. If you store a fixture with a fully discharged battery, it could fall into a

deep discharge state. If you store it fully charged, the battery may lose some capacity, leading to shorter battery life.

2. Power down the device to avoid additional battery use.

3. Place your device in a cool, moisture-free environment that’s less than 32° C (90° F).

REV.04-10/19

Music & Lights S.r.l. si riserva ogni diritto di elaborazione in qualsiasi forma delle presenti istruzioni per l’uso.

La riproduzione - anche parziale - per propri scopi commerciali è vietata.

Al fine di migliorare la qualità dei prodotti, la Music&Lights S.r.l. si riserva la facoltà di modificare, in

qualunque momento e senza preavviso, le specifiche menzionate nel presente manuale di istruzioni.

Tutte le revisioni e gli aggiornamenti sono disponibili nella sezione 'Manuali' sul sito www.musiclights.it

La pagina sta caricando ...

ProLights Revolutionary full colour event battery table lamp Manuale utente

ProLights Revolutionary full colour event battery table lamp Manuale utente

in altre lingue

Documenti correlati

Altri documenti