High End Systems Cyberlight 2.0 Manuale utente

High End Systems
Marca
High End Systems
Modello
Cyberlight 2.0
Categoria
Proiettori
Tipo
Manuale utente

Questo manuale è adatto anche per

Cyberlight
®
2.0
User Manual
©High End Systems, 2010, All Rights Reserved
Information and specifications in this document are subject to change without notice. High End Systems
assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual.
Trademarks used in this text:
Cyberlight, High End Systems, WholeHog, and Lithopatterns are registered trademarks; and Internal Effects,
the High End Systems globe logo, Light Burst, the Hog logo are trademarks of High End Systems, Inc. or High
End Systems Europe Ltd. Hog is a registered trademark of Flying Pig Systems. Belden is a registered
trademark of Belden, Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the
marks and names or their products. High End Systems disclaims any proprietary interest in trademarks and
trade names owned by others.
Cyberlight
®
User Manual
Version 2.0
February, 2010
ii Cyberlight
®
2.0 User Manual
Contact Information
U.S. and the Americas
Sales Department
Customer Service
World Wide Web:
High End Systems
2105 Gracy Farms Lane
Austin, TX 78758 USA
voice: 512.836.2242
fax: 512.837.5290
Toll Free: 800.890.8989
High End Systems
2105 Gracy Farms Lane
Austin, TX 78758 USA
voice: 800.890.8989
fax: 512.834.9195
toll free: 800.890.8989
http://www.highend.com
Cyberlight
®
2.0 User Manual iii
Declaration of Conformity
according to ISO/IEC Guide 22 and EN45104
Manufacturer’s name: High End Systems
Manufacturer’s address: 2105 Gracy Farms Lane
Austin, Texas 78758 USA
Distributor’s name: High End Systems, Inc.
Distributor’s address: 2105 Gracy Farms Lane
Austin, Texas 78758 USA
Declares that the product:
Product Name: Cyberlight, Cyberlight 2.0
Product Options: All
conforms to the following EEC directives:
73/23/EEC, as amended by 93/68/EEC
89/336/EEC, as amended by 92/31/EEC and 93/68/EEC
Equipment referred to in this declaration of conformity was manufactu
red in compliance
with the following standards beginning in 1995:
Safety: EN 60598-1 : 2004
EN 60598-2-17: 1989
A1-A3 : 1993
EMC: EN 550103-1 1996 Class A
EN55103-2: 1996
USA, Wednesday, February 10, 2010
Kenneth Stuart Hansen, Compliance Engineer
iv Cyberlight
®
2.0 User Manual
Product Modification Warning
High End Systems products are designed and manufactured to meet the requirements of United States and
International safety regulations. Modifications to the product could affect safety and render the product non-
compliant to relevant safety standards.
Mise En Garde Contre La Modification Du Produit
Les produits High End Systems sont conçus et fabriqués conformément aux exigences des règlements
internationaux de sécurité. Toute modification du produit peut entraîner sa non conformité aux normes de
sécurité en vigueur.
Produktmodifikationswarnung
Design und Herstellung von High End Systems entsprechen den Anforderungen der U.S. Amerikanischen und
internationalen Sicherheitsvorschriften. Abänderungen dieses Produktes können dessen Sicherheit
beeinträchtigen und unter Umständen gegen die diesbezüglichen Sicherheitsnormen verstoßen.
Avvertenza Sulla Modifica Del Prodotto
I prodotti di High End Systems sono stati progettati e fabbricati per soddisfare i requisiti delle normative di
sicurezza statunitensi ed internazionali. Qualsiasi modifica al prodotto potrebbe pregiudicare la sicurezza e
rendere il prodotto non conforme agli standard di sicurezza pertinenti.
Advertencia De Modificación Del Producto
Los productos de High End Systems están diseñados y fabricados para cumplir los requisitos de las
reglamentaciones de seguridad de los Estados Unidos e internacionales. Las modificaciones al producto podrían
afectar la seguridad y dejar al producto fuera de conformidad con las normas de seguridad relevantes.
Important Safety Information
Instructions pertaining to continued protection against fire, electric shock, and injury to persons are
found in Appendix B: Important Safety Information on page 43. Please read all instructions prior to
assembling, mounting, and operating this equipment.
Important: Informations De Sécurité
Les instructions se rapportant à la protection permanente contre les incendies, l’électrocution, excessif et aux
blessures corporelles se trouvent dans l’Annexe B. Veuillez lire toutes les instructions avant d’assembler, de
monter ou d’utiliser cet équipement.
Wichtige Sicherheitshinweise
Sicherheitsanleitungen zum Schutz gegen Feuer, elektrischen Schlag, und Verletzung von Personen finden Sie in
Anhang B. Vor der Montage, dem Zusammenbau und der Intbetriebnahme dieses Geräts alle Anleitungen
sorgfältig durchlesen.
Informazioni Importanti Di Sicurezza
Le istruzioni sulla protezione da incendi, folgorazione, e infortuni sono contenute nell’appendice B. Si prega di
leggere tutte le istruzioni prima di assemblare, montare e azionare l’apparecchiatura.
Informacion Importante De Seguridad
En el Apéndice B se encuentran instrucciones sobre protección continua contra incendios, descarga eléctrica, y
lesiones personales. Lea, por favor, todas las instrucciones antes del ensamblaje, montaje y operación de este
equipo.
Cyberlight
®
2.0 User Manual v
FCC Information
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the interference at his own expense.
Safety Symbols
The following international caution and warning symbols appear in margins throughout this manual to highlight
messages.
This symbol appears adjacent to Caution messages.
Not heeding these messages could result in personal
injury and/or damage to equipment.
This symbol appears adjacent to high voltage warning
messages. Not heeding these messages could result in
serious personal injury.
This symbol indicates the minimum focus distance
from a combustible object.
This symbol cautions against mounting the fixture on
or near a flammable surface.
This symbol indicates an explosion hazard.
This symbol cautions against an Ultraviolet Radiation
hazard.
This symbol indicates that eye protection should be
worn to prevent potential injury.
This symbol warns of a fire hazard.
This symbol indicates that, while operating, equipment
surfaces may reach very high temperatures. Allow the
fixture to cool before handling.
UV
vi Cyberlight
®
2.0 User Manual
Warranty Information
Limited Warranty
Unless otherwise stated, your product is covered by a one year parts and labor limited warranty. Dichroic filters
and LithoPatterns
®
high resolution glass gobos are not guaranteed against breakage or scratches to coating. It
is the owner’s responsibility to furnish receipts or invoices for verification of purchase, date, and dealer or
distributor. If purchase date cannot be provided, date of manufacture will be used to determine warranty period.
Returning an Item Under Warranty for Repair
It is necessary to obtain a Return Material Authorization (RMA) number from your dealer or point of purchase
BEFORE any units are returned for repair. The manufacturer will make the final determination as to whether or
not the unit is covered by warranty. Lamps are covered by the lamp manufacturer’s warranty.
Cyberlight 2.0 fixtures must be returned in its original roadcase. Any other parts returned to High End Systems
must be packaged in a suitable manner to ensure the protection of such Product unit or parts, and such package
shall be clearly and prominently marked to indicate that the package contains returned Product units or parts
and with an RMA number. Accompany all returned Product units or parts with a written explanation of the
alleged problem or malfunction. Ship returned Product units or parts to: 2105 Gracy Farms Lane, Austin, TX
78758 USA.
Note: Freight Damage Claims are invalid for fixtures shipped in non-factory
boxes and packing materials.
Freight
All shipping will be paid by the purchaser. Items under warranty shall have return shipping paid by the
manufacturer only in the Continental United States. Under no circumstances will freight collect shipments be
accepted. Prepaid shipping does not include rush expediting such as air freight. Air freight can be sent
customer collect in the Continental United States.
REPAIR OR REPLACEMENT AS PROVIDED FOR UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER. HIGH END SYSTEMS, INC. MAKES NO WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO
ANY PRODUCT, AND HIGH END SPECIFICALLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. HIGH END SHALL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGE, INCLUDING LOST PROFITS, SUSTAINED OR INCURRED IN CONNECTION WITH ANY
PRODUCT OR CAUSED BY PRODUCT DEFECTS OR THE PARTIAL OR TOTAL FAILURE OF ANY PRODUCT
REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT
LIABILITY OR OTHERWISE, AND WHETHER OR NOT SUCH DAMAGE WAS FORESEEN OR UNFORESEEN.
Warranty is void if the product is misused, damaged, modified in any way, or for unauthorized repairs or parts.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Cyberlight
®
2.0 User Manual vii
Patents
This product may use one or more of the following patents: US 4,392,187; US 4,602,321; US 4,688,161;
US
4,701,833; US 4,709,311; US 4,779,176; US 4,800,474; US 4,962,687; US 4,972,306; US 4,980,806;
US
5,010,459; US 5,031,078; US 5,073,847; US 5,078,039; US 5,186,536; US 5,209,560; US 5,278,742;
US
5,282,121; US 5,307,295; US 5,329,431; US 5,331,822; US 5,367,444; US 5,402,326; US 5,414,328;
US
5,426,576; US 5,430,629; US 5,432,691; US 5,454,477; US 5,455,748; US 5,502,627; US 5,506,762;
US
5,515,254; US 5,537,303; US 5,545,951; US 5,588,021; US 5,590,954; US 5,590,955; US 5,640,061;
US
5,647,662; US 5,691,886; US 5,702,082; US 5,728,994; US 5,758,955; US 5,758,956; US 5,769,527;
US
5,769,531; US 5,774,273; US 5,788,365; US 5,794,881; US 5,795,058; US 5,798,619; US 5,806,951;
US
5,812,596; US 5,823,661; US 5,825,548; US 5,828,485; US 5,829,868; US 5,857,768; US 5,882,107;
US
5,921,659; US 5,934,794; US 5,940,204; US 5,945,786; US 5,953,151; US 5,953,152; US 5,969,485;
US
5,980,066; US 5,983,280; US 5,984,248; US 5,986,201; US 6,011,662; US 6,029,122; US 6,048,080;
US
6,048,081; US 6,054,816; US 6,057,958; US 6,062,706; US 6,079,853; US 6,126,288; US 6,142,652;
US
6,142,653; US 6,172,822; US 6,175,771; US 6,188,933; US 6,208,087; US 6,219,093; US 6,220,730;
US
6,241,366; US 6,249,091; US 6,255,787; US 6,256,136; US 6,261,636; US 6,278,542; US 6,278,545;
US
6,278,563; US 6,288,828; US 6,326,741; US 6,327,103; US 6,331,756; US 6,346,783; US 6,421,165;
US
6,430,934; US 6,459,217; US 6,466,357; US 6,502,961; US 6,515,435; US 6,523,353; US 6,536,922;
US
6,538,797; US 6,545,586; US 6,549,324; US 6,549,326; US 6,563,520; US 6,565,941; US 6,570,348;
US
6,575,577; US 6,578,991; US 6,588,944; US 6,592,480; US 6,597,132; US 6,600,270; US 6,601,974;
US
6,605,907; US 6,617,792; US 6,621,239; US 6,622,053; US 6,635,999; US 6,648,286; US 6,664,745;
US
6,682,031; US 6,693,392; US 6,696,101; US 6,719,433; US 6,736,528; US 6,771,411; US 6,775,991;
US
6,783,251; US 6,801,353; US 6,812,653; US 6,823,119; US 6,865,008; US 6,866,390; US 6,866,402;
US
6,866,451; US 6,869,193; US 6,891,656; US 6,894,443; US 6,919,916; US 6,930,456; US 6,934,071;
US
6,937,338; US 6,955,435; US 6,969,960; US 6,971,764; US 6,982,529; US 6,988,805; US 6,988,807;
US
6,988,817; US 7,000,417; US 7,011,429; US 7,018,047; US 7,020,370; US 7,033,028; US 7,048,838;
US
7,055,963; US 7,055,964; US 7,057,797; US 7,073,910; US 7,078,869; US 7,092,098; US 7,119,902;
US
7,161,562; US 7,175,317; US 7,181,112; US 7,206,023; US 7,210,798; US D347,113; US D350,408;
US
D359,574; US D360,404; US D365,165; US D366,712; US D370,080; US D372,550; US D374,439;
US
D377,338; US D381,740; US D409,771; AT E169413; CA 2142619; CA 2145508; CA 2245842;
DE
22588.4-08; DE 621495; DE 655144; DE 69320175.4; DE 69322401.0; DE 69331145.2; DE 69525856.7;
DE
69734744.3; DE 797503; DK 0655144; DK 1447702; EP 0475082; EP 0621495; EP 0655144; EP 0662275;
EP
0767398; EP 0797503; EP 0969247; EP 1447702; ES 0621495; FR 0621495; FR 0655144; FR 0662275;
FR
1447702; GB 2043769B; GB 2055842B; GB 2283808B; GB 2290134B; GB 2291814B; GB 2292530B;
GB
2292896B; GB 2294909B; GB 2295058B; GB 2303203B; GB 2306887B; GB 2307036B; GB 2316477B;
IE
0621495; IT 034244BE; 2005; IT 0621495; IT 0655144; JP 3495373; JP 3793577; NL 0621495;
NL
0797503; NL 0969247; UK 0621495; UK 0655144; UK 0662275; UK 0797503; UK 0969247; UK 1447702;
viii Cyberlight
®
2.0 User Manual
Cyberlight
®
2.0 User Manual 1
Table of Contents
Cyberlight® 2.0 User Manual ............................................................................. i
Contact Information ..........................................................................................ii
Declaration of Conformity .................................................................................iii
Product Modification Warning ............................................................................iv
Important Safety Information ............................................................................iv
FCC Information .............................................................................................. v
Safety Symbols ............................................................................................... v
Warranty Information ......................................................................................vi
Limited Warranty ..........................................................................................vi
Returning an Item Under Warranty for Repair ..................................................vi
Freight ........................................................................................................vi
Patents .........................................................................................................vii
Chapter 1: Product Overview
This chapter describes the features and specifications of the
Cyberlight® 2.0 fixture along with a list of related products and
accessories.
Features ........................................................................................................... 1
Operation ....................................................................................................... 1
Optics ............................................................................................................ 2
Effects ........................................................................................................... 2
Construction ................................................................................................... 2
Specifications ................................................................................................... 3
Mechanical Specifications .................................................................................. 3
Wheel Components .......................................................................................... 3
Electrical Specifications .................................................................................... 4
Safety Standards ............................................................................................. 4
Environmental Specifications ............................................................................. 4
Cables and Connectors ..................................................................................... 5
Related Products and Accessories .................................................................... 5
Chapter 2: Installation and Setup
Installation includes mounting, connecting to power and establishing
Ethernet and DMX links. Setting a start channel configures the fixture
for DMX control.
Unpacking the Cybe
rlight® 2.0 Fixture ............................................................. 7
Installing the Power Cord Cap .......................................................................... 7
Power Cord Cap: UK Only ................................................................................. 7
VIGTIG FIKKER HEDS INFORMATION - DANMARK ................................................ 8
2 Cyberlight
®
2.0 User Manual
Installing the Yoke ........................................................................................... 9
Installing the yoke: .......................................................................................... 9
Mounting the Cyberlight 2.0 Fixture ............................................................... 10
Standing the Fixture on its End Handles ............................................................ 10
Mounting the Fixture on a Truss or Other Support System ................................... 10
Truss or Other Support System .................................................................... 10
Safety Cable .............................................................................................. 10
Clamps ...................................................................................................... 11
Mounting Procedure .................................................................................... 11
Linking Cyberlight 2.0 Fixtures ....................................................................... 12
Cable Connectors ........................................................................................... 12
Connecting to DMX512 Link ............................................................................. 13
Powering On the Fixture ................................................................................. 13
Setting the DMX Start Channel ....................................................................... 14
Shutting Down the Fixture .............................................................................. 14
Chapter 3: The Menu System
You can use the fixture’s onboard menu system to configure and test
the Cyberlight 2.0 fixture.
Navigating the Menu System .......................................................................... 15
Cyberlight 2.0 Menu Map ................................................................................ 16
Cyberlight 2.0 Menu Options ........................................................................... 18
Set Menu (SET) ............................................................................................. 19
Setting Factory Defaults (FACT) .................................................................... 19
Changing the Display Output (DSPL) ............................................................. 19
Inverting Pan (P/IN) .................................................................................... 19
Inverting Tilt (T/IN) .................................................................................... 20
Swapping Pan and Tilt (SWAP) ..................................................................... 20
Data Loss (DLOS) ....................................................................................... 20
Mode Menu (MODE) ....................................................................................... 21
Crossloading the Fixture (XLd) ...................................................................... 21
Selecting Lamp Power (LAMP) ...................................................................... 21
Test Menu (TEST) .......................................................................................... 22
Homing the Fixture (HOME) ......................................................................... 22
Lamp Test (LAMP) ....................................................................................... 22
Changing Boot Codes (BOOT) ....................................................................... 22
Performing Self Tests (SELF) ........................................................................ 23
Moving the Fixture to Setup Position (S/UP) ................................................... 23
Information Menu (INFO) ................................................................................ 24
Viewing the Current Software Version (VER) ................................................... 24
Viewing the Unique Fixture ID (UNIQ) ........................................................... 24
Cyberlight
®
2.0 User Manual 3
Monitoring Internal Fixture Temperature (TEMP) ..............................................24
Viewing Fixture Hours ..................................................................................25
Viewing DMX Data for the Link (DATA) ...........................................................26
Viewing Lamp Hours (L/HR) ..........................................................................26
Viewing Lamp Strikes (L/ST) .........................................................................27
Resetting Lamp Hours (L/RS) ........................................................................27
Monitoring the Fan Speed (FAN) ....................................................................27
Viewing Module Version Number (M/VR) .........................................................28
Chapter 4: Fixture Programming
Cyberlight® 2.0 fixtures can be programmed to provide hard edge
beam with full CMY color, multiple gobo patterns and effects, as well
as a variety of Shutter/Lamp functions.
DMX Programming Overview .......................................................................... 29
Full Speed verses MSpeed Control ....................................................................29
DMX Programming Options ..............................................................................29
Programming with a DMX Console ....................................................................29
Cyberlight® 2.0 DMX Parameters ................................................................... 30
Pan and Tilt .................................................................................................... 30
Color Mixing Flags .......................................................................................... 31
CMY Color Mixing ............................................................................................31
Color Function ................................................................................................31
Tri Color Effect ...............................................................................................31
Static Color Wheel .......................................................................................... 32
Static Color Position ........................................................................................32
Static Color Function .......................................................................................32
Static Gobo Wheel .......................................................................................... 33
Static Gobo Position ........................................................................................33
Static Gobo Function .......................................................................................33
Rotating Gobo Wheel ...................................................................................... 34
Rotating Gobo Position ....................................................................................34
Rotating Gobo Function ...................................................................................34
Rotating Gobo Rotate Coarse/Rotating Gobo Rotate Fine ......................................34
Effect Wheel ................................................................................................... 35
Effect Position ................................................................................................35
Effect Function ...............................................................................................35
Frost .............................................................................................................. 36
Zoom .............................................................................................................. 36
Iris ................................................................................................................. 36
4 Cyberlight
®
2.0 User Manual
Dim ................................................................................................................. 36
Shutter and Lamp Effects ............................................................................... 37
Shutter/Lamp Function ................................................................................... 37
MSpeed (Motor Speed) ................................................................................... 38
Macros ............................................................................................................ 38
Control Settings .............................................................................................. 39
Appendix A: MSpeed Conversion Table ...............................................41
Appendix B: Important Safety Information.........................................43
APPENDICE B: IMPORTANTES INFORMATIONS SUR LA SÉCURITÉ ......................... 45
ANHANG B: WICHTIGE HINWEISE FÜR IHRE SICHERHEIT ................................... 46
APÉNDICE B: INFORMACIÓN IMPORTANTE DE SEGURIDAD ................................. 48
APPENDICE B: IMPORTANTI INFORMAZIONI PER LA SICUREZZA .......................... 49
CHAPTER 1
Product Overview
Cyberlight
®
2.0 User Manual 1
Chapter 1:
Product Overview
This chapter describes the features and specifications of the Cyberlight
®
2.0
fixture along with a list of related products and accessories.
The Cyberlight
®
2.0 luminaire updates the classic Cyberlight fixture with brighter lamp, and
improved electronics. The MSR 2000 short arc lamp boosts the light output to 30,000 lumens.
An onboard menu system with an LED display replaces dip switches for easy addressing and
fixture configuration. A universal power supply eliminates the need to set voltages and provides
for electronic strobing. Individual DMX control of the color flags enhance color mixing and allow
for a unique tri-color effect.
Cyberlight 2.0 features motorized variable frost from hard edge to sof
t edge; beam position and
movement speed; focus; variable zoom; litho and CYM color selection; color mixing; variable
iris; variable-speed rotating lithos; full optical dimming; and automatic cooling system
shutdown. The fixture still accepts stock and custom LithoPatterns, including high resolution
glass gobos, Art Glass and Special Effects lithos. Electronic lamp ballast provides lamp strobe
and dimmming.
These improvements along with updated DMX an
d RDM control make Cyberlight 2.0 brightest
mirror fixture with the most features and effects on the market.
Features
Operation
• 170° pan and 90° tilt movement
• Increased mirror movement speeds
• Auto-switching power supply
• LED display for addressing and configuration
• 200v-240v
• 28 DMX channels of standard USITT DMX 512 protocol control
• DMX/RDM Connector: 5-pin XLR
• Compliances: ETL, CE
• Pan and tilt swap; pan and tilt invert
• Remote system enable/disable
• GE 2000 watt MSR lamp with 7000K color temperature
• 750-hour rated lamp life
CHAPTER 1
Product Overview
2 Cyberlight
®
2.0 User Manual
• Quick lamp change and optimization
• Electronic Lamp ballast
Optics
• Computer-optimized cold-mirror reflector and lens assembly for maximum output
• Enhanced mirror increases efficiency
• Motorized zoom control
• Zoom angle 13° to 22° (16° to 26° using the wide angle effect)
• Field angle up to 36°
• Motorized focus control
• Motorized variable frost from hard edge to soft edge
• Smooth, precise micro-stepped beam positioning
• 100% dimming, fade to black
Effects
• 16 million colors available via sophisticated dichroic subtractive CYM (cyan-yellow-
magenta) color mode
l
•
Eight-position indexed color wheel with a versatile selection of richly-saturated dichroic
colors plus open (white), custom dichroic filters available
• Variable speed (forward and reverse 0-50 RPM) rotating lithopatterns (from 0° to 360°)
with replaceable patterns (4 lithos plus open)
• Eight-position fixed litho wheel with seven easily-replaceable LithoPatterns standard
• Litho mixing effects: rotating over fixed, or fixed over fixed
• Eight-position effects wheel including a multi-image prism effect, and a subtractive color
di
chroic mosaic effect
• Infinitely-variable frost effect
• Wide angle and Diffusion lens effects
• Variable speed motorized iris control
• Variable high-speed strobe shutter and variable high speed electronic strobing
• Variable speed mirror scan, litho, and color changes
Construction
• High-resolution micro-stepping motor control for smooth motion at all speeds
• Full cutaway access to optical system for service and cleaning
• Electronic cooling system control
• Interlocked rear lamp replacement system for easy access
• External lamp position adjustment controls
• Performance oriented exterior design prevents stray light scatter
• Break-resistant mirror
CHAPTER 1
Product Overview
Cyberlight
®
2.0 User Manual 3
Specifications
Mechanical Specifications
Fixture weight (including yoke): 45kg (99 lb)
Shipping weight (Bo
x + Fixture + Yoke): 51.3 kg (113 lb)
Dimensions (including yoke): 510 mm x 443 mm x 1141 mm (20.1 in x 17.5 in x 45 in)
Shipping Box Dimensions: 749 mm x 1200 mm x 724 mm (29.5 in x 47.25 in x 28.5 in)
365 mm
14.4 in
510 mm
20.1 in
1074 mm
42.3 in
370 mm
14.6 in
339 mm
13.3 in
1141 mm
45 in
443 mm
17.5 in
339 mm
13.3 in
Wheel Components
Dichroic Glass: Diameter: 1.745 in ± 0.010 in (44.323 mm ± 0.25 mm)
Thickness: 0.069 in (1.75 mm)
Effects Glass: Diameter: 2.060 in ± 0.010 in (52.32 mm ± 0.25 mm)
Thickness: 0.069 in (1.75 mm)
Lithopatterns: Diameter: 1.745 in ± 0.010 in (44.323 mm ± 0.25 mm)
Thickness: 0.069 in (1.75 mm)
Image Area: 1.465 in (37.21 mm)
CHAPTER 1
Product Overview
4 Cyberlight
®
2.0 User Manual
Electrical Specifications
Voltage selectable: 208V / 230V only
Power consumption: 12 Amps at 200V, 10 Amps at 240V
Rated power: 2000W
Rated frequency: 50-60Hz
Rated Lamp Life: 750 hrs
Warning: Class I equipment - For continued protection
against electric shock connect this equipment to an
earthed (grounded) power source only
This equipment for connection to branch circuit
having a maximum overload protection of 20 A
Safety Standards
• EN 60598-1: 1993
• EN 60598-2-17: 1989
• A1-A3: 1993
EMC Standards
• EN 50081-1: 1992
• EN 50082-1: 1992
Environmental Specifications
Maximum ambient temperature: 45° C (113° F)
Maximum exterior surface temperature: 110° C (144° F)
Minimum distance to lighted object: 3 m (9.8 ft)
Minimum distance to flammable objects: 1 m (3.28 ft)
Caution: Do not mount on a flammable surface
Not for residential use
Use in dry locations only
CHAPTER 1
Product Overview
Cyberlight
®
2.0 User Manual 5
Cables and Connectors
Belden
®
3107A or equivalent (meets specifications for EIA RS-485 applications) with the
following characteristics:
• Two twisted pairs plus a shield
• maximum capacitance between conductors - 30 pF/ft.
• maximum capacitance between conductor and shield - 55 pF/ft.
• maximum resistance of 20Ω / 1000 ft.
• nominal impedance 100-140Ω
Related Products and Accessories
Name Part Number
Replacement Lamp MSR2000/SA (7000 K) 55030088
Cyberlight LithoPatterns Call
*
Cyberlight custom color wheel dichroic filters Call
*
Cyberlight touring yoke kit 55040005
Cyberlight narrow angle lens kit 55040012
Keal road case 19070004
Whole Hog
®
3 Lighting Console 25020001
Road Hog
®
Full Boar Lighting Console A6020001
Road Hog
®
Lighting Console A2020001
Heavy duty 5-pin XLR cable (10’) 55050017
Heavy duty 5-pin XLR cable (25’) 55050018
Heavy duty 5-pin XLR cable (50’) 55050019
Heavy duty 5-pin XLR cable (100’) 55050020
Galvanized safety cable 12040001
Cheeseborough clamp 55040014
Mega-Claw clamp 67040007
CHAPTER 1
Product Overview
6 Cyberlight
®
2.0 User Manual
CHAPTER 2
Installation and Setup
Cyberlight
®
2.0 User Manual 7
Chapter 2:
Installation and Setup
Installation includes mounting, connecting to power and establishing Ethernet
and DMX links. Setting a start channel configures the fixture for DMX control.
Unpacking the Cyberlight
®
2.0 Fixture
Carefully unpack your fixture and verify that it arrived complete and without any damage. If any
internal or external parts of the fixture are damaged you must notify both the shipping agent
and your sales agent immediately.
Do not discard the shipping carton and packing materials. The carton and packing materials
are specifically designed to protect the product during transport. High End Systems assumes no
responsibility for products damaged during transport. Any product being returned for repair
must be shipped in its original shipping carton and packing materials.
Note: Before sending anything to the factory, be sure to call your HES
dealer/distributor for a Return Authorization (RA) number. The factory
cannot accept any goods shipped without an RA number.
Installing the Power Cord Cap
You must obtain and install a power cord cap before you can connect the Cyberlight 2.0 to a
power outlet. The type of power cord cap you must obtain depends on the location in which the
Cyberlight 2.0 will be used; different locations (even within the same country) might have
different power cord cap requirements.
Note: Because of the wide variety of power cord caps used worldwide, High
End Systems cannot make specific recommendations for the
particular power cord cap you should use. Contact a local authority if
you are unsure which type of power cord cap you need.
Power Cord Cap: UK Only
The cores in the mains lead are colored in accordance with the following code:
• green and yellow: earth
• blue: neutral
• brown: live
Since the colors of the cores in the mains lead of this equipment may not correspond with the
colored markings identifying the terminals in your plug, proceed as follows:
CHAPTER 2
Installation and Setup
8 Cyberlight
®
2.0 User Manual
• The core which is colored green and yellow must be connected to the terminal in the plug
which is marked with the letter “E” or by the earth symbol , or colored green or green
and yellow
• The core which is colored blue must be connected to the terminal which is marked with the
letter “N” or colored black
• The core which is colored brown must be connected to the terminal which is marked with
the letter
“L” or colored red
VIGTIG FIKKER HEDS INFORMATION - DANMARK
ADVARSEI: RESKYTTEKSE MOD ELEKTRISK SHOCK
VIGTIGT!
LEDERE MED GROEN/GUL ISOLATION
MA KUN TILSLUTTES EN KLEMME MAERKET
ELLER =
CAUTION: Class 1 equipment. This equipment
must be earthed
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62

High End Systems Cyberlight 2.0 Manuale utente

High End Systems
Marca
High End Systems
Modello
Cyberlight 2.0
Categoria
Proiettori
Tipo
Manuale utente
Questo manuale è adatto anche per
Scarica il pdf
rapporto

in altre lingue

Documenti correlati

Altri documenti