soundsation MOOD L100 BEAM Manuale utente
- Categoria
- Stroboscopi
- Tipo
- Manuale utente
MOOD L100 BEAM
100W BEam moving head
TESTA MOBILE BEAM 100W
USER MANUAL
Please read this manual carefully and proper take care of this manual.
MANUALE D’USO
Si prega di leggere aentamente il presente manuale e di averne cura.
Dear customer,
First of all thanks far purchasing a SOUNDSATION® product. Our mission
is to satisfy all possible needs of musical instrument, professional audio and
lighting users offering a wide range of products using the latest technologies.
We hope you will be satised with this item and, if you want to collaborate, we
are looking for a feedback from you about the operation of the product and
possible improvements to introduce in the next future. Go to our website www.
soundsationmusic.com and send an e-mail with your opinion, this will help
us to build instruments ever closer to customer’s real requirements.
One last thing: read this manual before using the instrument, an incorrect
operation can cause damages to you and to the unit. Take care!
The SOUNDSATION Team
4
ENGLISH
TABLE OF CONTENTS
1.1. Important Safety Symbols ...................................................................................5
1.2. Important Safety Instructions ..............................................................................6
1.3. Before You Start ...................................................................................................7
2. FEATURES ...............................................................................................................8
3. SETUP .......................................................................................................................9
3.1. Installation .............................................................................................................9
3.2. Connections ........................................................................................................10
3.3. Front Panel ..........................................................................................................12
3.4. Rear Panel ...........................................................................................................13
3.5. Control Menu ......................................................................................................14
3.6. DMX Protocol ......................................................................................................14
4. WARRANTY AND SERVICE ..................................................................................16
5. WARNING ..............................................................................................................17
5
ENGLISH
MOOD L100 beam User manual
1.1. Important Safety Symbols1.1. Important Safety Symbols
The symbol is used to indicate that some hazardous live termi-
nals are involved within this apparatus, even under the normal
operating conditions, which may be sufcient to constitute the
risk of electric shock or death.
The symbol is used in the service documentation to indicate
that specic component shall be replaced only by the compo-
nent specied in that documentation for safety reasons.
Protective grounding terminal
Alternating current/voltage
Hazardous live terminal
Denotes the apparatus is turned on
Denotes the apparatus is turned off
WARNING: Describes precautions that should be observed to prevent the
danger of injury or death to the operator.
CAUTION: Describes precautions that should be observed to prevent dan-
ger of the apparatus.
To protect the environment, please try to recycle the packing material
as much as possible
The projector is for indoor use only, IP20. Use only in dry locations.
Keep this device away from rain and moisture, excessive heat, humid-
ity and dust. Do not allow contact with water or any other uids, or
metallic objects.
Don’t throw this product away just as general trash, please deal with
the product follow the abandon electronic product regulation in your
country.
0.5m
Locate the xture in a well ventilated spot, away from any ammable
materials and/or liquids. The xture must be xed at least 50cm from
surrounding walls
6
ENGLISH
MOOD L100 beam User manual
1.2. Important Safety Instructions
fRead these instructions
fKeep these instructions
fHeed all warning
fFollow all instructions
Water / Moisture
This lighting is intended to indoor use only. To prevent risk of re or shock,
do not expose xture to rain or moisture. Make sure there are no ammable,
explosive or corrosive materials surrounded in 10 meters while operating.
Heat
The apparatus should be located away from heat sources such as radiators,
stoves or other appliances that produce heat. Fixture may carry high heat, do
not aim at objective exceeding 2 minutes.
Ventilation
The unit must be installed in a location with adequate ventilation, at least 5m
away from adjacent surfaces. Be sure that no ventilation slots are blocked.
Object and Liquid Entry
Objects do not fall into and liquids are not spilled into the inside of the appara-
tus for safety.
Installation
Always secure xture using a safety chain and carrying handles. Never carry
the xture by its cord.
Power Cord and Plug
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two poles; a grounding-type plug has two poles and a third
grounding terminal. The third prong is provided for your safety. If the provided
plug does not t into your outlet, refer to an electrician for replacement.
Power Supply
Always make sure that you are connecting to the proper voltage and the line
voltage not higher than stated on the decal or rear panel of the xture. Unplug
this apparatus during lightning storms or when unused for long periods of time.
Fuse
To prevent the risk of re and damaging the unit, please use only of the rec-
ommended fuse type as described in the manual. Before replacing the fuse,
7
ENGLISH
MOOD L100 beam User manual
make sure the unit turned off and disconnected from the AC outlet.
Electrical Connection
Always disconnect from the power source before servicing or replacing fuse/
lamp and be sure to replace with same fuse/lamp size and type. Cut off power
before moving, repairing and cleaning the machine. Improper electrical wiring
may invalidate the product warranty.
To avoid electric shock, all xtures must be connected to circuits with a sui-
table ground. Do not power on and power off the xture in a short time.
DMX connection
When use DMX controller, please make sure that there is no interference
sources (e.g. intercom, high frequency radio waves and radiation source.
Cleaning
Clean only with a dry cloth. Do not use any solvents such as benzol or alcohol.
Servicing
In case of failure or misfunction occurred, stop using the unit immediately.
Never try to repair the unit by yourself. Repairs carried out by unskilled people
can lead to damage or malfunction. Please contact the nearest authorized
technical assistance center. Buy the same spare parts/components from ma-
nufacturer directly.
Any damage that is caused by violating this manual is out of insurance, our
company will not take the responsibility.
Warning
Avoid direct eye exposure to the light source while it is on.
1.3. Before You Start
1.3.1 UNPACKING
Thank you for purchasing MOOD L100 BEAM Moving Head. Every Moving Li-
ght has been well tested and has been shipped in perfect operating condition.
Carefully unpack the box and check the contents to ensure that all parts are
present and in good conditions.
• 1 Moving Head
• 1 DMX Cable (3pin XLR Male to Female)
• 1 Power cable (PowerCon)
• 1 Omega Clamp
• 1 User manual
•
8
ENGLISH
MOOD L100 beam User manual
If anything damaged during transport, notify the shipper immediately and keep
the packing material for inspection. Again, please save the carton and all
packing materials. If the xture must be returned to manufacturer, it is impor-
tant that the xture be returned in the original manufacturer box and packing.
Please do not take any action without rst contacting us.
1.3.2 Getting started
The MOOD L100 BEAM Moving Head is part of a wider range of SOUND-
SATION DMX intelligent Moving Head Lights. This light is compact and light
weight and very easy to use. It is ideal for any rental job or installation. The
unit can be controlled by any DMX controller or in standalone mode.
Make sure there is enough space around the unit for proper ventilation and
prevent overheating; do not place the unit on top of hot devices such as
radiators or power ampliers. The console is connected to mains through the
supplied cable. The product meets the required safety standards. Blown fuses
must be replaced with fuses of the same type and specication.
Make sure that all units must be properly grounded. For your safe-
ty, you should never remove any ground connector from electrical
devices or power cables, or make them inoperative.
2. FEATURES
MOOD L100 BEAM is a compact beam moving head equipped with a single
100W high-brightness white LED, extremely bright and reliable, with precise
and silent Pan/Tilt movements.
f100W high-brightness white LED with a 50.000 hours lifespan
fColor Wheel: 7 colors + White and Color rotation
fGobo Wheel: 7 gobos + White and Gobo rotation
fPrism: Static and Rotating
fBeam Angle: 2,5°
fElectronic dimmer: 0-100%
fStrobe:1-20Hz
fControl mode : 12 CH, DMX512, Master/slave, Auto, Sound
fPan/Tilt: 540° / 270°
fLED Display (English)
fVoltage: AC100V-240V - 50/60Hz
fRated Power: 100W
9
ENGLISH
MOOD L100 beam User manual
fMains socket: PowerCon
fSocket DMX IN: 3 pin XLR M
fSocket DMX OUT: 3 pin XLR F
fStock: Clean and Dry place
fRunning Temp.: 0-40°C
fNet Weight: 4 kg
fFixture Size (WxDxH): 230 x 155 x 300 mm
fGross Weight: 5 kg
fPacking size (WxDxH): 290 x 270 x 310 mm
Note: Our products are subject to a process of continuous further development. Specications are
subject to change without notice.
3. SETUP
3.1. Installation
Pay attention to the safety! Please respectively consider the EN
60598-2-17 and the national standard during the installation. The
authorized dealer must only carry out the installation.
The installation of the xture has to be built and constructed in a way that it
can hold 10 times the weight for 1 hour without any harming demolishment.
The installation must always be secured with a secondary safety attachment,
e.g. an appropriate catch net. This secondary safety attachment must be
constructed in a way that no part of the installation can fall down if the main
attachment fails.
When rigging, de-rigging or servicing the xture staying in the area below the
installation place, on bridges, under high working places and other endange-
red areas is forbidden. The operator has to make sure that the safety measure
and the machine’s technical installation is approved by an expert before taking
into operation for the rst time and after changes before taking into operation
another time. He has also to make sure that an expert approves safety mea-
sure and the machine’s technical installation once a year.
WARNING:Thextureshouldnotbeinstalledinoutsideareaswhe-
re persons may walk by or be seated.
IMPORTANT:Overheadriggingrequiresextensiveexperience,inclu-
ding (but not limited to) calculating working load limits, lnowledge
10
ENGLISH
MOOD L100 beam User manual
of the installation material used, and periodic safety inspection of it
andtheprojector.Ifyoulackthesequalications,donotattemptthe
installation yourself, but instead consult a professional structural
rigger. Improper installation can result in bodily injury or property
loss.
If the xture shall be lowered from the ceiling or high joists, professional trus-
sing systems have to be used. The xture must never be xed swinging freely
in the room. Before rigging make sure that the installation area can hold a
minimum point load of 10 times the projector’s weight.
CAUTION:Fixturemaycausesevereinjurieswhencrashingdown.If
you have doubts concerning the safety of a possible installation, do
notinstallthexture!
CAUTION:Usetwoappropriateclampstorigthextureonthetruss.
Follow the instructions mentioned at the bottom of the base. Make
surethatthedeviceisxedproperly!Ensurethatthestructure
(truss)towhichyouareattachingthexturesissecure.
DANGER OF FIRE! When installing the device, make sure there is
nohighlyinammablematerial(decorationarticles,etc.)withina
distance of minimum 0.5 metre.
The moving-head light can be placed directly on the oor or rigged in any
orientation on a truss without altering its operation characteristics. Use the
rigging clamp to merge the M10 or M12 screw – please check the base.
3.2. Connections
3.2.1 Mains Connections
Connect the device to the mains with the power-plug. The wire corresponden-
ce is as follow:
Cable Pin Intermational
Brown Live L
Blue Neutral N
Yellow/Green Earth
The earth must to be connected! Pay attention to the safety!
11
ENGLISH
MOOD L100 beam User manual
Before taking into operation for the rst time, the installation has to be appro-
ved by an expert.
3.2.2 DMX-512 Connection
The wires must not come into contact with each other; otherwise the xtures
will not work at all, or will not work properly.
Only use a stereo-shielded cable and 3-pin XLR-plugs and connectors in order
to control the xture or one xture with another.
1 = Ground / Shield
2 = DMX +
3 = DMX -
OUTPUT
DMX use of XLR connectors
INPUT
If you are using the recommended controllers, you can connect the DMX-out-
put of the controller directly with the DMX-input of the rst xture in the DMX-
chain. If you wish to connect DMX-controllers with other XLR-output, you need
to use adapter-cables.
3.2.3. Building a Serial DMX Chain
Connect the DMX-output of the rst xture in the DMX-chain with the DMX-in-
put of the next xture. Always connect one output with the input of the next
xture until all xtures are connected.
DMX 512
DMX Terminator
A word on termination: DMX is a resilient communication protocol, however
errors still occasionally occur. Termination reduces signal errors, and there-
12
ENGLISH
MOOD L100 beam User manual
fore best practices include use of a terminator in all circumstances. If you are
experiencing problems with erratic xture behavior, especially over long signal
cable runs, a terminator may help improve performance.
DMX Terminator
120ohm, 1/4W
resistor
To build your own DMX Terminator: Obtain a 120-ohm, 1/4-watt resistor, and
wire it between pins 2&3 of the last xture. They are also readily available
from specialty retailers.
Complimentarysignalcablecantransmitssignalsto20unitxtures
atmost.Signalamplierisamusttoconnectmorextures.
3.2.4. Master-Slave control mode
Set up one xture as Master xture (triggering) and other xtures as Slave x-
tures (receiving trigger signals). A xture is automatically set as Master when
it is the rst in the DMX chain, and xtures connected after it will behave as
Slave units. Make sure that all xtures have the same DMX address.
3.3. Front Panel
Front panel is composed by an LED display, a microphone, and four buttons
(MENU, UP, DOWN, ENTER), which help the user to adjust all functions de-
scribed in the following paragraphs. The xture is really easy to be controlled.
MENU UP DOWN ENTER
MIC
13
ENGLISH
MOOD L100 beam User manual
3.3.1 Buttons
MENU Scrolls through all functions
UP In sub-menu: next function
On numerical value: increases value
DOWN In sub-menu: previous function
On numerical value: decreases value
ENTER Enters function and conrms value
3.4. Rear Panel
DMX IN DMX OUT FUSE
ON
OFF
POWER IN
From left to right:
fDMX IN: 3-poles XLR Male connector
fDMX OUT: 3-poles XLR Female connector
fFuse Holder
fOn/Off switch
fPowerCon power input
14
ENGLISH
MOOD L100 beam User manual
3.5. Control Menu
Press the “MENU” button to scroll through the functions, which are shown on
the display. Press the “UP” and “DOWN” buttons to navigate the sub-menus
and values, then press “ENTER” to conrm. Press the “MENU” button again to
scroll through the next functions.
DISPLAY VALUES FUNCTION AND DESCRIPTION
d001 d001-d512 Sets the DMX channel of the xture be-
tween 1 and 512
SLoU
SLoU Fixture performs programs in Slow mode
FASt Fixture performs programs in Fast mode
SrUn
(Sound
Mode)
Fixture performs programs according to
sound detected. Sound sensitivity can be
adjusted between S-00 - S-99
PAn PAn Pan motor turns clockwise
rPAn Pan motor turns anticlockwise
tiL tiL Tilt motor turns in default direction
rTil Tilt motor turns in opposite direction
dIS dIS Display stays in the default position
rdIS Display turns upside down
rESt rEST Resets Pan and Tilt motors
LoAd LoAd Restores default settings
C--- C--- Fixture temperature
3.6. DMX Protocol
12 CH DMX Channel Mode
CH Function Value Description
1 Pan 000-255 Pan rotation
2 Pan Fine 000-255 Fine regulation of Pan movement
3Tilt 000-255 Tilt rotation
4Tilt ne 000-255 Fine regulation of Tilt movement
15
ENGLISH
MOOD L100 beam User manual
5Pan/Tilt
Speed 000-255 Adjusts Pan/Tilt speed, from fast to
slow
6 Dimmer 000-255 Dimmer function, 0%-100%
7 Strobe 000-015 White/Open
016-255 Strobe function, from slow to fast
8 Color
000-015 White
016-031 Red
032-047 Green
048-063 Blue
064-079 Yellow
080-095 Magenta
096-111 Cyan
112-127 Amber
128-255 Color rotation, from slow to fast
9Static Gobo
000-015 White/Open
016-031 Gobo 1
032-047 Gobo 2
048-063 Gobo 3
064-079 Gobo 4
080-095 Gobo 5
096-111 Gobo 6
112-127 Gobo 7
Gobo
Wheel 128-255 Gobo rotation, from slow to fast
10 Prism
000-127 White/Open
128-135 Static Prism
136-255 Prism rotation, from slow to fast
11 Auto Mode
000-050 White/Open
051-100 Automatic mode, slow pace
101-150 Automatic mode, fast pace
151-255 Sound mode
16
ENGLISH
MOOD L100 beam User manual
12 Reset
000-020 White/Open
020-100 Auto Pan
100-200 Auto Tilt
201-249 Auto Pan/Tilt
250-255 Pan/Tilt Reset
4. WARRANTY AND SERVICE
All SOUNDSATION products feature a limited two-year warranty. This two-
year warranty is specic to the date of purchase as shown on your purchase
receipt.
The following cases/components are not covered from the above warranty:
• Any accessories supplied with the product
• Improper use
• Fault due to wear and tear
• Any modication of the product effected by the user or a third party
SOUNDSATION shall satisfy the warranty obligations by remedying any
material or manufacturing faults free of charge at SOUNDSATION’s discretion
either by repair or by exchanging individual parts or the entire appliance. Any
defective parts removed from a product during the course of a warranty claim
shall become the property of SOUNDSATION.
While under warranty period, defective products may be returned to your local
SOUNDSATION dealer together with original proof of purchase. To avoid any
damages in transit, please use the original packaging if available. Alternatively
you can send the product to SOUNDSATION SERVICE CENTER – Via Enzo
Ferrari , 10 – 62017 Porto Recanati - Italy . In order to send a product to ser-
vice center you need an RMA number. Shipping charges have to be covered
by the owner of the product.
For further information please visit www.soundsationmusic.com
17
ENGLISH
MOOD L100 beam User manual
5. WARNING
PLEASE READ CAREFULLY – EU and EEA (Norway, Iceland and Liechten-
stein) only
This symbol indicates that this product is not to be disposed of with your
household waste, according to the WEEE Directive (2202/96/EC) and your
national law.
This product should be handed over to a designated collection point, e.g., on
an authorized one-for-one basis when you buy a new similar product or to an
authorized collection site for recycling waste electrical and electronic equip-
ment (WEEE).
Improper handling of this type of waste could have a possible negative impact
on the environment and human health due to potentially hazardous substanc-
es that are generally associated with EEE. At the same time, your cooperation
in the correct disposal of this product will contribute to the effective usage of
natural resources.
For more information about where you can drop off your waste equipment
for recycling, please contact your local city ofce, waste authority, approved
WEEE scheme or your household waste disposal service.
This product is imported in EU by
FRENEXPORT SPA – Via Enzo Ferrari, 10 - 62017 Porto Recanati - Italy
www.soundsationmusic.com
Soundsation® is a registered trademark of FRENEXPORT SPA - Italy
Gentile cliente,
innanzitutto grazie per aver acquistato un prodotto SOUNDSATION®. La
nostra missione è quella di soddisfare tutte le esigenze degli utenti di strumen-
ti musicali, audio professionale e illuminazione, offrendo una vasta gamma di
prodotti che utilizzano le tecnologie più avanzate.
Ci auguriamo che siate soddisfatti di questo prodotto e, se volete collabora-
re, siamo alla ricerca di un vostro feedback sul funzionamento del prodotto e
sui possibili miglioramenti da introdurre in futuro. Visitate il nostro sito www.
soundsationmusic.com e inviate un’e-mail con la vostra opinione: ci aiuterà
a costruire strumenti sempre più vicini alle reali esigenze dei clienti.
Un’ultima cosa: leggete questo manuale prima di utilizzare lo strumento,
un’operazione impropria può causare danni a voi e all’unità. Fate attenzione!
Il team SOUNDSATION
20
ENGLISH
SOMMARIO
1.1. Importanti simboli di sicurezza .........................................................................21
1.2. Cura del prodotto ...............................................................................................22
1.3. Prima di iniziare ..................................................................................................23
2. CARATTERISTICHE PRINCIPALI .........................................................................24
3. INSTALLAZIONE ....................................................................................................25
3.1. Occorrente e Assemblaggio ..............................................................................25
3.2. Connessioni ........................................................................................................27
3.3. Pannello Frontale ...............................................................................................29
3.4. Pannello Posteriore ............................................................................................29
3.5. Funzioni del Menu ..............................................................................................30
3.6. Modalità canale DMX ..........................................................................................31
4. GARANZIA E ASSISTENZA ..................................................................................33
5. AVVISO ..................................................................................................................34
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
soundsation MOOD L100 BEAM Manuale utente
- Categoria
- Stroboscopi
- Tipo
- Manuale utente
