Groupe Brandt DVF742XE1 Manuale del proprietario

Categoria
Lavastoviglie
Tipo
Manuale del proprietario

Questo manuale è adatto anche per

33
Dear Customer,
You have just acquired a
DE DDIETRICH
dishwasher and we would like to thank you.
Our research teams have created this new generation of appliances for you. Their quali-
ty, design, features and technological advances make them exceptional products, and
reveal our unique know-how.
Your new
DE DDIETRICH
dishwasher will blend harmoniously into your kitchen and will
perfectly combine washing and drying performance and ease of use. We wanted to offer
you a product of excellence.
In the
DE DDIETRICH
product range, you will also find a wide choice of hobs, ovens,
microwaves, hoods, cookers, fridges, freezers, that you can coordinate with your new
DE
DIETRICH
dishwasher.
Visit our website
www.dedietrich-eelectroomenager.coom
, where you will find our latest inno-
vations as well as useful and complementary information.
DE DDIETRICH
Setting New Values
As part of our commitment to constantly improving our products, we reserve the right to
make changes to them based on technical advances to their technical and functional fea-
tures and appearance.
WWaarrnniinngg ::
BBeeffoorree iinnssttaalllliinngg aanndd uussiinngg yyoouurr aapppplliiaannccee,, pplleeaassee ccaarreeffuullllyy rreeaadd tthhiiss GGuuiiddee
ttoo IInnssttaallllaatti
ioonn aanndd UUssee,, wwhhiicchh wwiillll aallllooww yyoouu ttoo qquuiicckkllyy ffaammiilliiaarriissee yyoouurrsseellff wwiitthh iittss
ooppeerraattiioonn..
34
EN
35
ENEN
CONTENTS
1/ FOR THE USER’S ATTENTION
Safety instructions ______________________________________ 36
Environmental protection ________________________________ 37
Economical, environmentally friendly washing ________________ 37
2/ DESCRIPTION OF YOUR APPLIANCE
General presentation of the dishwasher ____________________ 38
Presentation of the control panel __________________________ 39
3/ INFORMATION ______________________________________________ 40
4/ WHAT TO DO BEFORE FIRST USING THE MACHINE
Measure the water hardness and select the type of detergent __ 41
Hardness table__________________________________________ 41
5/ DETERGENT PRODUCTS AND ADJUSTING THE WATER SOFTENER
For traditional products __________________________________ 42
For multi-purpose products
________________________________ 43
6/ LOADING OF REGENERATING SALT __________________________ 44
7/ LOADING OF RINSING PRODUCT ____________________________ 45
8/ YOUR DISHWASHER’S EQUIPMENT
The lower basket ________________________________________ 46
The upper basket ________________________________________ 47
The cutlery basket ______________________________________ 48
9/ SETTING THE PARAMETERS__________________________________ 49
10/ WASHING PROGRAMMES __________________________________ 50
11/ PROGRAMMING __________________________________________ 52
12/ CLEANING YOUR APPLIANCE
Cleaning the waste filters ________________________________ 53
13/ YOUR DISHWASHER’S SAFETY SYSTEMS ____________________ 55
14/ IF OPERATING ABNORMALITIES OCCUR ______________________ 56
Changing the bulb ______________________________________ 61
15/
AFTER-SALES SERVICE ____________________________________ 62
16/ INDICATIONS FOR THE TESTING LABORATORIES ______________ 63
36
EN
1/ FOR THE USER’S ATTENTION
Important :
Keep this user’s manual with your appli-
ance. If the appliance is sold or transferred to
someone else, ensure that the manual is with
it. Please take note of these instructions
before installing and using your appliance.
They have been drawn up for your own and
other people’s safety.
• SAFETY INSTRUCTIONS
• Installation
— When you receive your appliance, unpack it
or have it unpacked immediately. Check that it
has not suffered any damage during transport.
Express any reservations in writing on the
delivery note, of which you keep a copy. Never
connect up a damaged machine. If your appli-
ance is damaged, please contact your dealer.
— Before proceeding to connect up your
machine, please refer to the instructions in
your Installation Guide.
— Your dishwasher must be kept disconnected
from the mains supply throughout the whole
of the installation process.
— The electrical connection details on your
appliance’s description plate must comply
with those for the mains supply.
— The socket must still be accessible once
your appliance has been installed.
— Do not alter or attempt to alter the appli-
ance’s characteristics. This could put you at
risk.
— If your installation has to be altered, only
entrust the electrical and plumbing work to a
qualified electrician or plumber respectively.
— Your appliance is designed for normal
domestic use. Do not use it for industrial or
commercial purposes or for any other purpose
than that for which it has been designed.
— The dishwasher’s walls must not be pierced
under any circumstances.
• Children’s safety
— This appliance is not intended for use by
young children or infirm persons unless they
have been adequately supervised by a respon-
sible person to ensure that they can use the
appliance safely.
— This appliance must only be used by adults.
Ensure that children do not touch it and do not
use it as a toy. Ensure that they do not operate
the appliance’s controls.
— Keep young children away from the appli-
ance when it is operating.
— Detergents contain irritant and abrasive sub-
stances. These products can have caustic
effects on the eyes, the mouth or the throat.
They can be extremely dangerous if ingested.
Avoid any contact with the skin and the eyes.
Ensure that the appliance’s detergent contain-
er is empty at the end of the washing cycle.
— Place detergents out of children’s reach and
do not put any detergent in the machine until
just before you start the washing programme.
— The water in your dishwasher is not drinking
water; this is why children must not go near
the appliance when its door is open.
— Do not let your children play or sit on the
door when it is open.
— Once you have unpacked your appliance,
place the packaging out of children’s reach.
— Keep all the packaging materials (e.g. plastic
bags, polystyrene, etc.) out of children’s reach
because they can be dangerous for children
(ie. risk of suffocation).
• Use
— This appliance is not intended for use by per-
sons (including children) with reduced physi-
cal, sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction concern-
ing use of the appliance by a person responsi-
ble for their safety.
— When machine is running, do not open door.
This may provoke steam leakage or splattering
of water.
37
EN
1/ FOR THE USER’S ATTENTION
— Only use products specially designed for your dishwasher (water softening salt, detergent and
rinsing products).
— As far as possible, avoid opening the dishwasher’s door when it is operating, and in particular
during the heating phases, because scalding steam may escape or you may be splashed with hot
water. The machine is fitted
with a safety system that immediately blocks the dishwasher’s operation if the door is opened.
— Never use chemical solvents in your appliance because these could cause an explosion.
— Always close your appliance’s door after loading or removing your items.
— Do not lean or sit on your appliance’s door when it is open.
— You are strongly advised to disconnect the machine after use and turn off the water supply.
— Unplug your machine before carrying out any technical work on it.
— Avoid placing your machine immediately next to a cooking or heating appliance to prevent any
risk of heat damage;
— Do not place any items in your machine, which are not certified as dishwasher safe.
— If you have removed an item before the end of the washing programme, it is important to rinse it
carefully to remove any residual washing products.
— If your appliance breaks down, never attempt to repair it yourself. Any repairs made by non-qual-
ified personnel can cause significant damage or lack of control.
— The machine complies with applicable safety regulations. Any repairs should be carried out by
qualified technicians. Repairs or changes that do not conform may be dangerous for the users. In
case of replacement, only use original parts.
— If the machine malfunctions due to other causes than those mentioned in this booklet, disconnect
the machine (remove the plug) or break the circuit concerned and contact after-sales service.
ENVIRONMENTAL PROTECTION
This appliance’s packaging material is recyclable. Help recycle it and protect the environment by
dropping it off in the municipal receptacles provided for this purpose.
Your appliance also contains a great amount of recyclable material. It is marked with this
label to indicate that in countries that are a members of the European Union the used
appliances should not be mixed with other waste. This way, the appliance recycling orga-
nised by your manufacturer will be done under the best possible conditions, in compliance
with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your
town hall or your retailer for the used appliance collection points closest to your home.
We thank you doing your part to protect the environment.
• ECONOMICAL, ENVIRONMENTALLY FRIENDLY WASHING
— Remove any food residue from your crockery (bones, pips, etc.)
— Do not pre-wash your items by hand (useless waste of water).
— Utilise your dishwasher’s capabilities to the full for an economical, environmentally friendly wash.
— Always select a washing programme suitable for the crockery type and how dirty they are.
— Avoid overdosing with detergent, regenerating salt and rinsing liquid. Follow the recommenda-
tions in this guide (pages 43-44-45) and the instructions on the product packs.
— Ensure that the water softener is correctly set (see pages 42-43).
38
EN
2/ DESCRIPTION OF YOUR APPLIANCE
Advice:
This user’s guide is applicable to several models. There may be some slight differences
in the details and the equipment between your appliance and the descriptions provided here.
• GENERAL PRESENTATION OF THE DISHWASHER
Upper basket
Washing products dispenser
Anti-blocking gauge wire
Lower sprinkler arm
Regenerating salt tank
Waste filter
Main filter
Rinsing product dispenser
Description plate (After-Sales
Ref)
Internal-lighting bulb
(according to model)
K
I
H
G
F
E
D
C
B
A
Fig. 01
B
C
D
E
F
G
H
I
J
A
K
39
EN
2/ DESCRIPTION OF YOUR APPLIANCE
• PRESENTATION OF THE CONTROL PANEL
On/Off:
Press this button to start your dishwasher.
Choosing a programme:
briefly
press one button or the other in succession
to select your programme.
:
IInntteelllliiggeenntt CCoonnttrrooll SSyysstteemm
press this button to select the Automatic pro-
gramme.
Set:
(see para. 9, adjustment of settings)
Holding down the
“Set
button brings up the
settings menu;
- choice of language,
- Set the water softener,
- Activate or deactivate the “Regenerating
Salt” and/or “Rinsing Product” lights, or the
“TABS
AUTO” function (depending on the water
softener setting on the following pages).
- Beep at end of programme,
- Set screen brightness.
Choice of delayed-start washing:
Press this button to delay the programme
by 1 to 12 hours.
Start/Cancel:
Briefly press this button
to start your programme.
If you make an error, to cancel a selection or
cancel a programme while it is running, hold
down this button for 3 seconds.
The indicator lights:
SSaalltt::
When lit, it indicates lack of regenerating salt
Rinsing liquid:
When lit, it indicates lack of rinsing product
Multipurpose products:
lit; shows you that the “TABS
AUTO” feature is
turned on and that the programmes are now
automatically adjusted if a multi-function tablet
is used.
Current programme:
on: shows current programme.
The front display screen:
Displays the current time, the programme end
time, the time
remaining and the
warning lights.
F
E
D
C
B
A
Advice:
A short audible signal (beep) confirm the button’s selection, except for the “On/Off” button.
In the interests of energy conservation, the front display light goes off after the dishwasher has been inac-
tive for a given time.
To ease loading, the dishwasher’s internal light comes on when the door is opened and goes off when you
push or close it, regardless of the position of the On/Off switch.
Fig. 02
A D E F
C
B
40
EN
3/ INFORMATION
Important:
To obtain impeccable washing and
drying results from your dishwasher without
any marks, you must set it carefully using the
water softening system, which utilises rege-
nerating salt.
- Use the most suitable washing products for
the hardness of your town’s water supply.
- There are several types of products:
As rainwater infiltrates into the ground it
picks up mineral salts; some minerals are
found in solid form and are commonly called
‘lime’. This reduces the detergent’s washing
performance and leaves white marks on the
crockery.
The more lime there is in the water, the ‘harder’
the water is.
For an impeccable clean, opt for
using traditional products together:
Washing product
for a perfect clean
(standard powder, liquid or tablets).
Regenerating salt
for your dishwa-
sher’s water softener to work correctly.
Rinsing liquid
to assist drying and eli-
minate drip marks.
Important:
Never use normal washing-up liquid.
For ease of use and in certain water
hardness conditions only (< 25°F),
multi-purpose products
can make the
use of regenerating salt and rinsing liquid
unnecessary.
“Two-in-one” tablets
contain deter-
gents and rinsing liquid or an agent serving
the function of the salt.
“Three-in-one” tablets
contain
detergents and rinsing liquid as well as an
agent serving the function of the salt.
“Four-in-one” “Five-in-one”
tablets...
also contain additives that pre-
vent wear on poor quality glasses or the risk
of stainless items corroding.
Important:
Follow the instructions in the user’s
manual and the recommendations on the
multi-purpose detergent’s pack.
NB:
If in any doubt, please contact the
detergent’s manufacturer if the items are
very wet at the end of the programme or if
chalky deposits appear.
41
EN
4/ WHAT TO DO BEFORE FIRST USING THE MACHINE
In one simple action, you can test the your water’s lime content using the testing strip supplied with
your dishwasher. Alternatively, contact your local water utility to ascertain your water’s hardness.
— Let the water run from the tap for a few moments.
— Fill a glass with water.
— Take the test strip from its holder and immerse it for 3 seconds.
— Wait 1 minute, shake it and look at the colours to ascertain your water’s hardness.
• MEASURE THE WATER HARDNESS AND SELECT THE TYPE OF DETER-
GENT: TRADITIONAL OR MULTI-PURPOSE
• HARDNESS TABLE
Test sstrip
Hardness
0-10°F 10-18°F 18-25°F 25-40°F 40-55°F 55-70°F
> 70°F
Water
Soft
Slightly hard Slightly hard
Hard Hard Hard
Very hard
WWaatteerr ssooffttee-
nniinngg aanndd uussee
ooff ssaalltt
Optional
Essential if
using traditional
products
Essential if
using traditional
products
Mandatory Mandatory Mandatory Mandatory
Possible use of
traditional products
Use only of
traditional products
R
+
or or
oorr
Multi-purpose
+
Traditional pproducts: PP
:
P
owder detergent or
L
:
L
iquid detergent or single tablet
+
S
: Regenerating
S
alt +
R
:
R
insing product
Multi-ppurpose pproducts:
Multi-purpose tablets
R
+
or or
+
42
EN
5/ DETERGENT PRODUCTS AND ADJUSTING THE WATER SOFTENER
Important:
It is very important to set the water softener correctly.
- If the setting is too low, there is the risk of chalky marks appearing.
- if the setting is too high, there is the risk of causing clouding of the glasses.
If you relocate, adjust the water softener setting as required.
• Traditional tablets
Non-multipurpose tablets should be placed in the external compartment (Fig 04) or, for optimum
performance, pull out the dispenser drawer and lay the tablet inside (Fig 05).
• Powders or liquids (Fig 03)
Fill at least up to the minimum mark for slightly dirty crockery and to the maximum mark for dirty
crockery. If the crockery is very dirty and for programmes with a pre-wash we recommend that you
add 5g of detergent (a dessert spoonful) into your dishwasher’s tub in accordance with the pro-
grammes table.
Important:
Keep these products out of children’s reach and away from dampness.
Only use products specially designed for dishwashers.
Fig. 04 Fig. 05Fig. 03
• FOR TRADITIONAL PRODUCTS
• Your machine must be specially adjusted to use traditional products.
• Proceed as follows to adjust the water softener on the control panel:
— Access the settings menu by holding down the
“SET” button. Then briefly press twice times to adjust
the softener.
— This is then displayed on the screen from H0 to H6.
The softener factory setting is H4.
— To change this setting (according to water hardness), briefly press on one of the , repeatedly.
The screen will display the setting:
— Confirmation is automatic after about 10 seconds. Otherwise press
“SET
.
— You can turn off the settings menu at any time by pressing the
“Start/C”
button
Testing sstrip
Hardness
0-10°F 10-18°F 18-25°F
25-40°F
40-55°F 55-70°F > 70°F
Traditional
product
HIH0 H2 H3 H4 H5 H6
43
EN
5/ DETERGENT PRODUCTS AND ADJUSTING THE WATER SOFTENER
• Loading the multi-purpose tablet dispenser
To assist in loading the detergent, the distributor is situated on the front of the upper basket. It is
compatible with all the products recommended for dishwashers.
• Place the tablet
in the external compartment (Fig 04 on previous page) or, for optimum
results, pull out the distributor’s drawer and lay the tablet inside
(Fig 05 on previous page).
- Close the dispenser.
• FOR MULTI-PURPOSE PRODUCTS (Water hardness < at 25°F)
• Proceed to set the water softener
This feature is adjusted using the “SET; button; hold down this button to access the menu. Then
press
twice
to set the softener level.
The softener level is then shown on the screen from
HH00
to
HH66
. The default level is
HH44
..
In order to use multi-function tablets, you need to adjust the setting. To do this, press either arrow but-
ton several times until you have selected
HH00
or
HH II
or
HH22
depending on the water hardness.
• Proceed to set the “ ” function (optional)
— Hold down the “S
ET” button until the “
TABS
AAUUTTOO
” light flashes, then press one or other of the
selection buttons
.
:deactivates the “
TABS
AAUUTTOO
” option.
: corresponds to activation of the “
TABS
AAUUTTOO
” function with the setting for “Sparkling
Clean”. This enables you to prioritise a brilliant finish for your crockery.
: corresponds to activation of the “
TABS
AAUUTTOO
” function with the setting for “Extra Dry”.
“Extra dry” enhances the drying results if performance is reduced.
— The setting is validated automatically after 10 seconds if the
SET
button in not pressed again.
— The “
TABS
AAUUTTOO
” light then illuminates permanently if this option has been selected.
• Your appliance automatically adapts to using multipurpose products when
the water hardness is < 25°F.
Testing sstrip
Hardness
0-10°F 10-18°F 18-25°F
Multi-ppurpose
products FFunction
Deactivated
Multi-ppurpose
pprroodduuccttss SSppaarrkklliinngg CClleeaann
Multi-ppurpose
products
Extra DDry
H0
OH
HI
OH
H2
OH
H0
OFF
H0
OH
HI
OFF
HI
OH
H2
OFF
H2
OH
44
EN
6/ LOADING OF REGENERATING SALT
• Loading of regenerating salt (Fig 06)
Important :
Only use special dishwasher regener-
ating salt. Do not use table salt or any type of
cooking salt, this could damage your appli-
ance’s water softener.
Unscrew and remove the stopper on the
salt tank.
Fill the tank with regenerating salt special-
ly designed for dishwashers.
Use the funnel supplied with your dish-
washer. The first time, top up with water up to
the rim of the tank.
Regenerating salt indicator:
This illuminates when salt must be added. After
the tank has been filled with regenerating salt,
the indicator light may remain lit until the salt
has dissolved sufficiently, usually after one
cycle (of if the tank has not been filled com-
pletely; for example, when first putting the
machine into service using the sample).
It may be deactivated when using multifunc-
tion tablets (see para.9, Adjusting the set-
tings).
Important
If the salt overflows when filling the tank,
to avoid oxidization of the tub it is advisable to
remove the salt crystals or to run a Prewash
programme (or Rapid programme -
depending on the model).
C
B
A
EAU
SEL
Fig. 06
A
B
C
Saalt
wwater
45
EN
7/ LOADING OF RINSING PRODUCT
Important :
Only use a rinsing product designed for
dishwashers. The rinsing product ensures
your items shine and are well dried.
When first putting the machine into
service, fill the tank until the level is flush with
the top of the adjustment lever. Pour in at least
all the rinsing product provided.
The original setting is 2.
After several cycles and if drying is incomplete or
there are stains, we recommend increasing the
setting by turning the knob (fig 07
) to posi-
tion 3.
- Close completely.
Tip::
Position 1 reduces the amount of rinsing
product needed and may be sufficient for your
use.
Rinsing liquid indicator light:
This illuminates when rinsing product is
required.
It may be deactivated when using multifunc-
tion tablets (see para. 9, Adjusting the set-
tings).
Important :
If any of the product overflows during
filling, sponge up the excess to avoid pro-
ducing foam.
C
BA
• Loading of rinsing product (Fig. 07)
Adjustment lever
Fig. 07
1
2
3
1
2
3
A
B
C
46
EN
8/ YOUR DISHWASHER’S EQUIPMENT
Arrange your items so that the water can cir-
culate freely and spray over all the utensils.
Place large diameter dishes and pans at the
sides.
Do not intersperse, jam together or superim-
pose flat plates and concave dishes (Fig. 08).
The flexible racking spikes makes it easier to
arrange your large dishes (Fig. 09).
Advice:
When you re-insert the lower basket,
ensure that nothing catches on the oversize
plate barrier to avoid blocking the rotating
spray arm.
Unloading your items
Empty the lower basket to avoid drips from
the upper basket falling onto the lower basket.
• THE LOWER BASKET
Very important
Items not suitable for washing in a dishwasher:
- Wooden cutting boards
- Stainless steel utensils or plastic utensils that are not heat-resistant
- Copper or pewter items
- Glued crockery and cutlery
- Cutlery with wooden, horn or mother-of-pearl handles
- Antique or hand-painted porcelain
When purchasing crockery, glasses or cutlery, ensure that it is dishwasher-safe
Fig. 09
Fig. 08
47
EN
8/ YOUR DISHWASHER’S EQUIPMENT
Fig. 11
• THE UPPER BASKET
This basket is particularly designed to take
glasses, cups, ramekins, small salad bowls,
bowls and saucers.
Arrange your items methodically to save on
space (arranging glasses, cups or bowls
together).
You can also arrange cups, ladles, etc. on the
folding cup racks (Fig. 10)
Advice:
Position the cavities of glasses, cups
or bowls facing downwards.
• Adjusting the height of the upper
basket
For large dishes to be loaded in the lower
basket, the upper basket must be set the to
high position. This can be done with the bas-
ket fully loaded (Fig. 11)
Setting in HIGH POSITION:
Gently raise your basket on each side until it
engages.
Setting in LOW POSITION:
Raise your basket completely on both sides to
unlock it and then lower it to the low position.
Important :
Check that the two slides are set to the
same height and the basket is horizontal.
Cutlery basket
Fig. 10
48
EN
8/ YOUR DISHWASHER’S EQUIPMENT
Movable grills are available for if you wish to
load your cutlery in an orderly manner
(Fig.
13).
For optimum washing and drying, use these
separation grills partially or totally.
Point the handles on the cutlery downwards.
Important :
For safety reasons, we recommend
that you place knives with pointed ends with
the point facing downwards in the cutlery
basket (to avoid the risk of an accident).
Long-bladed knives and other sharp kitchen
utensils must be placed flat in the upper bas-
ket.
Avoid washing cutlery with horn handles in
your dishwasher.
Separate silverware from other metals using
the separation grill.
• THE CUTLERY BASKET
Fig. 13
The cutlery basket slides to allow flexible
loading.
It can be placed anywhere in the lower basket.
You can therefore make a variety of loads
depending on the items (Fig. 12).
If your cutlery items or your dishes are too
large, alter the height setting for the upper
basket.
Fig. 12
49
EN 9/ SETTING THE PARAMETERS
Advice:
The setting is confirmed automatically when you move on to the next parameter or if the
“Set” button is not pressed again within the next 10 seconds.
> Setting the time (hour)
As above, press one of the selector buttons to set the hour.
> Setting the time (minutes)
As above, press one of the selector buttons to set the minutes.
> Setting the water softener
Set to the level corresponding to the hardness of your water:
HH00
to
HH66
.
> Product use
You can cancel display of the relevant indicators, depending on the products
used:
- Salt Set to
OOFFFF
if you do not use salt or f you are using multi-purpose
tablets.
- Rinsing product Set to
OOFFFF
if you do not use a rinsing product or if you are
using multi-purpose tablets.
> Multifunction tablets
For optimum product efficiency, it is important to set the softener correctly (see
para. 5 Washing products and softener setting). Adjust :
desactivation of function “
activation of function “
“completely ddry ((by ddefault)
activation of function “
“Sparkling cclean”
> Beep at the end of the programme
OOnn
to activate the function;
OOFFFF
if you do not wish not to hear the beep at the end
of the program.
> Screen brightness
Set the screen brightness to suit yourself from
LLuu11
minimum to
LLuu55
maximum.
Holding down the button gives access to the settings menu
Adjust the parameters using the programme selector buttons
Briefly pressing the “Set” button takes you to the next setting.
• SETTINGS POSSIBLE WITH “SET” AND SELECTOR BUTTONS:
Hold
down
“SET”
Press
“Start” or
wait
10 sec.
Briefly press “SET” then press one
of the selector buttons
or
50
EN 10/ WASHING PROGRAMMES
• PROGRAMMES TABLE
Drying
by condenser
Resistant
Very ddirty
A large amount of
dried-on
residue,
baked-on stains,
grease, residue
from frying, cooked
cheese, sauce, etc.
Mixed
Hot rinse
Drying
by condenser
Hot rinse
Rinse
Rinse
Washing at 70°C
Washing at 55°C
Hot pre-wash
Normally ddirty
A normal amount of
dried-on, adhering
residue on every-
day items.
Normal
Drying
by condenser
Mixed
Normally ddirty
A normal amount of
dried-on
and greasy residue
on
everyday items.
Faster, but
consumes more
energy.
Hot rinse
Rinse
Washing at 65°C
Pre-wash Pre-wash
These values refer:
- to normal usage conditions with separated products (detergents, salt, rinsing product).
- only to multifunction product usage conditions
They may vary depending on the load, the water temperature, the softener setting, the presence of rins-
ing product and the supply voltage.
ITEM TTYPE
(porcelain, ppans, ccut-
lery, gglasses)
FOOD RRESIDUE:
Quantity, ttype aand
amount
PROGRAMMES
PROGRAMME
SEQUENCE
As aan iindication oonly:
Duration iin mmin
Water ((L)
Energy ((Kwh)
120’
- 140’
17
- 19
1,7
- 1,8
90’
- 120’
17
- 19
1,5
- 1,6
130’
- 150’
17
- 19
1,3
- 1,4
51
EN 10/ WASHING PROGRAMMES
Mixed
Mixed
Very sshort 330-
minute
wash
specially designed
for a small amount
of daily items with a
limited amount of
non-greasy residue,
not dried on.
Air Drying
Automatically
detects tthe aamount
of wwashing uup aand
the llevel oof ssoiling.
Normal amount of
dried on residue on
everyday items.
Faster, but
consumes more
energy.
Hot rinse
Rinse
Natural drying
Hot rinse
Rinse
Washing at 45°C Washing at
55/
65°C
Rapid
Pre-wash
Mixed
Air Drying
Hot rinse
Rinse
Washing at 50°C
Normally ddirty
Recommanded for
normally soiled
load, less consum-
ing in energy.
Mixte
Pre-wwash
Very sshort ccycle
(with no
detergent) for rins-
ing and
re-dampening the
items while
waiting for a wash
expected the fol-
lowing day or even
the day after
Cold pre-wash
100
- 130’
17
- 21
1,4
- 1,6
160’
- 165’
15
- 17
1,05
- 1,3
30’
11
0,8
15
4,5
0,02
52
EN
11/ PROGRAMMING
Advice:
Consult the Programmes table on the preceding pages to determine the programme you
end time
time remaining
panel lock
Fig. 02
A D E F
C
B
Waiting for delayed start
Immediate starting of a programme
Press “
On
/Off” to switch on the appliance.
Select a programme by pressing any button
,
or the
‘’ICS’
button if using automatic programming.
When a programme is selected the relevant light
comes on.
Press
Start
/C , the ‘current’ light comes on
and the programme starts.
Advice:
A short audible signal (beep) confirm the but-
ton’s selection, except for the “On/Off” button.
Delayed start of a programme
Delay a programme by 1 to 12 hours by successively
pressing or holding down the
‘’Delayed sstart’’
button
.
Confirm by pressing
Start
/C
.
The screen counts off the hours to the start of the
programme.
Cancelling a programme
Press “Start/
C
for a few seconds
Switching off the appliance
When the programme is finished, press “On/Off
.
A
F
F
E
F
A
Time remaining in programme:
Programme end time:
Time remaining in programme:
Programme end time:
End of programme:
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Groupe Brandt DVF742XE1 Manuale del proprietario

Categoria
Lavastoviglie
Tipo
Manuale del proprietario
Questo manuale è adatto anche per

in altre lingue