LG HW904PA Manuale del proprietario

LG
Marca
LG
Modello
HW904PA
Categoria
Lettori DVD
Tipo
Manuale del proprietario
Model : HW904TA (HW904TA-AHP, SH94TA-F/S/C/W, W94R)
HW904PA (HW904PA-AHP, SH94PA-F/S/C/W, W94R)
HW904SA (HW904SA-AHP, SH94SA-S/C/W, W94R)
P/NO : MFL60020777
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
As an ENERGY STAR
®
Partner,
LG has determined that this
product or product models meet
the E
NERGY STAR
®
guidelines for
energy efficiency.
ENERGY STAR
®
is a U.S. registered mark.
Full HD up-scaling (1080p)
(Go to page 8)
HDMI In
(Go to page 9)
Made for iPod
(Go to page 20)
USB Direct Recording
(Go to page 19)
Home theater Speaker ez Set-up
(Go to page 17)
Portable In
(Go to page 21)
HW904PA-AHP_BHKGLLK_ENG_0777 3/25/09 9:36 PM Page 1
2
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING : Do not install this equipment in a confined space such as a book case or
similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from over heating. The openings shall be
never be blocked by placing the product on a bed, sofa, rug or other similar surface.
This product shall not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instruction has been
adhered to.
CAUTION : This product employs a Laser System.
To ensure proper use of this product, please read this owner’s
manual carefully and retain it for future reference. Shall the unit
require maintenance, contact an authorized service center.
Use of controls, adjustments or the performance of procedures
other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and
no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit ;
That is, a single outlet circuit which powers only that appliance and has no additional
outlets or branch circuits. Check the specification page of this owner's manual to be
certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized service center.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord plug. When installing the
product, ensure that the plug is easily accessible.
For Wireless product European Union Notice
Products bearing the CE marking comply with the R&TTE Directive
(1999/5/EC), EMC Directive (2004/108/EC), and the Low Voltage
Directive (2006/95/EC) issued by the Commission of the European
Community. Indoor use only.
Compliance with these directives implies conformity to the following European Norms
(in parentheses are the equivalent international standards and regulations):
• EN 55022 (CISPR 22)-Electromagnetic Interference
• EN 55024 (IEC61000-4-2,3,4,5,6,8,11)-Electromagnetic Immunity
• EN 60065 (IEC 60065) - Product Safety
• EN 300 328-Technical requirements for radio equipment
• 301 489-1 and EN 301 489-17-General EMC requirements for radio equipment.
European representative :
LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere, The Netherlands
(Tel : +31-036-547-8940)
Safety Precaution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The cord grip for the plug fitted to this product is built
into the existing power cord as supplied. If, for any
reason you need to shorten the cord,
Anew plug must be used to ensure your continued
safety by securing the plug to the power cord in
accordance with Plug & Socket Regulations 1994.
IMPORTANT SAFETY NOTICE
DO NOT RE-USE THE PLUG.
HW904PA-AHP_BHKGLLK_ENG_0777 3/25/09 9:36 PM Page 2
Contents
Setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-6
LED indicator of Wireless Receiver . . . . . . . . . . . . . . . . . .5
Initial Setting an ID of Wireless . . . . . . . . . . . . . . . . . . . . .5
Setting an ID of Wireless . . . . . . . . . . . . . . . . . . . . . . . . . .5
Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-9
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
OSD Initial language settings - Optional . . . . . . . . . . . . . .11
Initial Setting the Area Code - Optional . . . . . . . . . . . . . .11
Adjusting the general settings . . . . . . . . . . . . . . . . . .11-13
5.1ch ez Set-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Enjoying a preprogrammed sound field . . . . . . . . . . . . . .13
Displaying Disc Information . . . . . . . . . . . . . . . . . . . . . . .14
Playing a disc or file . . . . . . . . . . . . . . . . . . . . . . . . . .14-16
Viewing photo files . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Home theater Speaker ez Set-up . . . . . . . . . . . . . . . . . . .17
Using an USB device . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Using an USB device . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Playing the iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Listening to music from your portable player or
external device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Other operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Types of Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . .24
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
What is SIMPLINK?
Some functions of this unit are controlled by TV’s remote control when this unit and
LG TV with SIMPLINK are connected through HDMI connection.
• Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop,
Power Off, etc.
• Refer to the TV owner’s manual for the details of SIMPLINK function.
• LG TV with SIMPLINK function has the logo as shown above.
• Use a higher version cable than 1.2A HDMI cable.
3
Welcome to your new DVD Receiver
France Notice
Pour la France métropolitaine
2.400 - 2.4835 GHz (Canaux 1à 13) autorisé en usage intérieur
2.400 -2.454 GHz (canaux 1 à 7) autorisé en usage extérieur
Pour la Guyane et la Réunion
2.400 - 2.4835 GHz (Canaux 1à 13) autorisé en usage intérieur
2.420 - 2.4835 GHz (canaux 5 à 13) autorisé en usage extérieur
Italy Notice
A general authorization is requested for outdoor use in Italy.
The use of these equipments is regulated by:
1. D.L.gs 1.8.2003, n. 259, article 104 (activity subject to general authorization) for
outdoor use and article 105 (free use) for indoor use, in both cases for private use.
2. D.M. 28.5.03, for supply to public of RLAN access to networks and telecom services.
L’uso degli apparati è regolamentato da:
1. D.L.gs 1.8.2003, n. 259, articoli 104 (attività soggette ad autorizzazione generale) se
utilizzati al di fuori del proprio fondo e 105 (libero uso) se utilizzati entro il proprio
fondo, in entrambi i casi per uso private.
2. D.M. 28.5.03, per la fornitura al pubblico dell’accesso R-LAN alle reti e ai servizi di
telecomunicazioni.
Brazil Notice
Este equipamento opera em caráter secundário, isto é, não tem direito a proteção
contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode
causar interferência a sistemas operando em caráter primário.
Latvia Notice
A license is required for outdoor use for operation in 2.4 GHz band
HW904PA-AHP_BHKGLLK_ENG_0777 3/25/09 9:36 PM Page 3
4
Setting up
Attaching the speakers to the DVD receiver
aa
You will have received four speaker cables.
Each one is colour-coded by a band near each end and connects one of
the four speakers to the DVD receiver.
bb
Connect the wires to the DVD receiver.
Match each wire’s coloured band to the same coloured connection
terminal on the rear of the DVD receiver. To connect the cable to the DVD
receiver, press each plastic finger pad to open the connection terminal.
Insert the wire and release the finger pad.
Connect the black end of each wire to the
terminals marked -(minus) and the other end
to the terminals marked + (plus).
cc
Connect the wires to the speakers.
Connect the other end of each wire to the correct speaker according to
the colour coding
:
To connect the cable to the speakers, press each plastic finger pad to open the
connection terminals on the base of each speaker. Insert the wire and release
the finger pad.
1Attach the speakers to the speaker stands by rotating the screw.
2 If you want to arrange the speaker cable, draw the speaker cable
through the hole on the speaker.
3 Connect the speaker cable.
The speakers are detached from the speaker stands.
Assembling the Speakers (HW904TA, HW904PA)
aa
bb cc
FRONT R
CENTER
SUB WOOFER
FRONT L
Red
Green
Orange
White
In front of you, to the right of the
screen.
Above screen, directly in front of you.
This can be placed in any front position.
In front of you, to the left of the
screen.
POSITION
SPEAKER
Main Unit
HW904PA-AHP_BHKGLLK_ENG_0777 3/25/09 9:36 PM Page 4
5
Be careful of the following
If there is a strong electromagnetic wave product nearby, interference may
occur. Put the unit (Wireless Receiver and main unit) away from there.
(Ex: Microwave oven)
If there is no audio signal for longer than 10 minutes, the Wireless Receiver will
automatically switch to standby mode. In power saving mode, both LEDs will
turn red. LEDs will turn blue when there is any audio signal back.
If you operate main unit then wireless speakers (rear speakers) sound within a
few seconds in standby mode.
LED indicator of Wireless Receiver
BLUE
The
Wireless Receiver is receiving the signal of
the
Wireless transmitter
.
RED The Wireless Receiver is in standby mode.
OFF (No display) The Wireless Receiver is turned off.
LED color
Operation
Setting an ID of Wireless
1Turn on the main unit and Wireless
Receiver: POWER Switch
2 Press and hold STOP(x) on the front of
unit and MUTE on the remote control.
“REMATE” appears in display window. -
3Turn off the Wireless Receiver: POWER Switch
4Turn on the Wireless Receiver:
A new ID is set. POWER Switch
When the unit is manufactured, the ID is already set. If an interference
occurs or you use a new Wireless Receiver, an ID should be set again.
ON Wireless
Receiver
Initial Setting an ID of Wireless
1 Connect the Wireless Receiver and the rear
speaker (right, left) with the speaker
cables.: -
2 Connect the power cord of the Wireless
Receiver to the outlet.: -
3Turn on the main unit and Wireless
Receiver:
The main unit and wireless receiver will be
automatically connected.
“MATE OK” appears in display window POWER Switch
ON Wireless
Receiver
HW904PA-AHP_BHKGLLK_ENG_0777 3/25/09 9:36 PM Page 5
6
Setting up
Be careful of the following
• Be careful to make sure children do not put their hands or any objects into
the *speaker duct.
*Speaker duct: A holl for plentiful bass sound on speaker cabinet(enclosure).
• Set the distance between this unit and Wireless Receiver within 10m.
• Optimum performance can be implemented only when the Wireless
Transmitter and the Wireless Receiver within distance of 2m to 10m is used
since communication failure may occur if longer distance is used.
• Be sure to match the speaker cable to the appropriate terminal on the
components: + to + and – to –. If the cables are reversed, the sound will be
distorted and will lack bass.
•
It takes a few seconds (and may take longer) for the
Wireless Transmitter
and
Wireless Receiver
to communicate with each other.
• Use the rear speaker at least 30 CM away from either TV screen or PC
monitor
About Ferrite Core (for EMI only)
Be sure to attach the ferrite core to the speaker cable (for connecting to
this unit and wireless receiver).
This ferrite core can reduce noises.
How to attach the ferrite core
1 Press the stopper [a] of the ferrite
core to open.
2 Wind the speaker cables once on
the ferrite core. (Refer to the fig.3
and comment.).
3 Close the ferrite core until it clicks.
The length
here is as
short as
possible.
(fig.3)
Rear of wireless
receiver
HW904PA-AHP_BHKGLLK_ENG_0777 3/25/09 9:36 PM Page 6
7
Hooking up the unit
a Connect jacks on the unit and your TV (DVD player or Digital Device etc.) using the cables.
Check the jacks of your TV, and choose the A, B or C connection. Picture quality improves in order from A to C.
b Plug the power cord into the power source.
AM/ FM connection
AM - Connect the AM loop
aerial to the DVD receiver.
FM - Connect the FM aerial.
The reception will be its best
when the two loose ends of
the aerial are in a straight and
horizontal line.
Component Video connection (B)
Connect the COMPONENT
VIDEO (PROGRESSIVE
SCAN) OUTPUT jacks on
the unit to the corresponding
input jacks on your TV using
a Y PB PR cable.
Audio In connection
The unit’s Audio jacks are colour
coded (red for right audio and white
for left audio). If your TV has only
one output for audio (mono),
connect it to the left (white) audio
jack on the unit.
Video Out connection (A)
Connect the VIDEO
OUTPUT(MONITOR) jack
on the unit to the
corresponding input jack on
your TV using a Video
cable.
HW904PA-AHP_BHKGLLK_ENG_0777 3/25/09 9:36 PM Page 7
8
Hooking up the unit
Resolution Setting
You can change the resolution for component video and HDMI output.
Press RESOLUTION repeatedly to select the desired resolution - 480i (or 576i),
480p (or 576p), 720p, 1080i, 1080p
The resolution may not be selected depending on the connection or TV.
• Depending on your TV, some of the resolution settings may result in the
picture disappearing or an abnormal picture appearing. In this case, press
RESOLUTION repeatedly until the picture re-appears.
You can set 1080p video resolution to enjoy Full HD picture quality. (Full
HD up-scaling)
Available resolution according to connection
Displayed resolution in display window and outputted resolution may different
according to connection type.
[HDMI OUT]: 1080p, 1080i, 720p and 480p(or 576P) and 480i(or 576i)
[COMPONENT VIDEO OUT]: 480p(or 576p) and 480i(or 576i)
[VIDEO OUT]: 480i(or 576i)
Notes on HDMI Out connection
• If your TV does not accept your resolution setting, abnormal picture appears
on the screen.(“TV do not support” will appears in screen)
Please read owner’s manual for TV, and then set the resolution that your TV
can accept.
• Changing the resolution when the unit is connected with HDMI connector
may result in malfunctions. To solve the problem, turn off the unit and then
turn it on again.
• When you connect a HDMI or DVI compatible device make sure of the
following :
-Try switching off the HDMI/ DVI device and this unit. Next, switch on the
HDMI/ DVI device and leave it for around 30 seconds, then switch on this
unit.
- The connected device’s video input is set correctly for this unit.
- The connected device is compatible with 720X480i(576i), 720X480p(576p),
1280X720p, 1920X1080i or 1920X1080p video input.
- The 1080p, 720p and 480p(576p) resolutions are the progressive scan
applied resolution.
• Not all HDCP-compatible DVI devices will work with this unit.
- The picture will not be displayed properly with non-HDCP device.
Enjoying audio from an external source and selecting the function
You can enjoy audio from an external source through your unit. And You can
select the function.
Press FUNCTION repeatedly to select the desired input source and the
function (DVD/CD, USB , OSD IPOD, IPOD, AUX, AUX OPT, PORTABLE,
HDMI IN, FM, AM).
HDMI Out connection (C)
Connect the HDMI OUTPUT jack
on the unit to the HDMI input jack
on a HDMI compatible TV using a
HDMI cable.
HW904PA-AHP_BHKGLLK_ENG_0777 3/25/09 9:36 PM Page 8
Hooking up the unit Main Unit
1 Power (
11
/
``
)
Turns the unit on and off.
2 DVD/CD Disc Drawer
3 Open/Close (
ZZ
)
4 Play/Pause(
BB
/
XX
)
5 Stop (
xx
)
6 TUNING (-/+) (
..>>
), Skip / Search
7 Function (FUNC.)
Selects the function and input source.
(DVD/CD, USB , OSD IPOD, IPOD, AUX, AUX OPT, PORTABLE, HDMI IN,
FM, AM)
8 Volume (VOLUME)
Controls the volume when using any function.
9
iPod Dock
10 PORT. (Portable) IN port
You can enjoy music from portable device on your unit.
11 USB port
You can play video, image and sound files by connecting the USB
device.
9
HDMI In connection
Connect the HDMI INPUT jack on
the unit to the HDMI output jack on
your Set-Top box (or Digital Device
etc.) using an HDMI cable. Set the
external source to HDMI IN by
pressing FUNCTION. In HDMI IN
mode, you can’t change the
resolution.
Digital Audio in connection
Connect the unit’s OPTICAL
IN jack to the optical out to
jack on your TV (or Digital
Device etc.)
12 34567 8
11 10 9
HW904PA-AHP_BHKGLLK_ENG_0777 3/25/09 9:36 PM Page 9
10
Remote control
a
b
c
d
FUNCTION : Selects the function and input source.
(DVD/CD, USB , OSD IPOD, IPOD, AUX, AUX OPT,
PORTABLE, HDMI IN, FM, AM)
SLEEP : Sets the System to turn off automatically at a
specified time. (Dimmer : The front panel display is
dimmed)
POWER : Switches the unit ON or OFF.
OPEN/CLOSE : Opens and closes the disc Drawer.
TITLE : If the current DVD title has a menu, the title
menu appears on the screen. Otherwise, the disc menu
may not appear.
DISPLAY : Accesses On-Screen Display.
MENU : Accesses the menu on a DVD disc.
SETUP : Accesses or removes setup menu
PRESET (
UU uu
) : Selects programme of Radio.
TUN. (-/+) : Tunes in the desired radio station.
UU uu II ii
(up/ down/ left/ right): Used to navigate on-
screen displays.
ENTER : Acknowledges menu selection.
RETURN (O) : moving backwards in the menu.or
exited the setup menu.
REC (z) : USB Direct Recording
STOP (x) : Stops playback or recording.
PLAY (B), MO./ST. : Starts playback. Selects Mono/
Stereo
PAUSE/STEP (X) : Pause playback
SKIP (
..
/
>>
) : Go to next or previous chapter/
track/ file.
SCAN (bb/BB) : Search backward or forward.
TV
tt
HT SPK (Home theater Speaker ez Set-up) :
Press TV
t
HT SPK to select the AUX OPT directly
MUTE : To mute the sound.
VOL (Volume) (+/-) :
Adjusts speaker volume.
NIGHT : The night mode is to improve listenalbe at
lower volumes. (NIGHT
y
NATURAL)
SPECIAL EQ (EQUALIZER effect) : You can choose
sound impressions.
REPEAT/RANDOM : To select a play mode. (Repeat,
Random)
SUBTITLE : During playback, press SUBTITLE
repeatedly to select a desired subtitle language .
0-9 numerical buttons : Selects numbered options in a
menu.
TV Control buttons : Controls the TV. (LG TV only)
PROG./MEMO. : Accesses or removes Program menu.
CLEAR : Removes a track number on the Program List.
RESOLUTION : Sets the output resolution for HDMI
and COMPONENT VIDEO OUT jacks.
: This button is not available.
Put the batterie into the remote control
Make sure that the + (plus) and – (minus) on the
battery match those on the remote control
.
a
b
c
d
Controlling the TV.
You can control the sound level, input source, and
power switching of LG TVs as well. Hold POWER (TV)
and press PR/CH (+/–) button repeatedly until the TV
turns on or off.
HW904PA-AHP_BHKGLLK_ENG_0777 3/25/09 9:36 PM Page 10
11
Adjusting the settings - more you can do
Adjusting the language settings
Menu Language – Select a language for the Setup menu and on-screen
display.
Disc Audio/ Disc Subtitle/ Disc Menu – Select a language for the Disc Audio/
Disc Subtitle/ Disc Menu.
[Original] : Refers to the original language in which the disc was recorded.
[Other] : To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language code list in
the reference chapter (see page 22). If you make a mistake before pressing
ENTER, press CLEAR.
[Off] (for Disc Subtitle) : Turn off Subtitle.
Adjusting the general settings
ON REMOTE
1Display setup menu : SETUP
2 Select a desired option on the first level :
UU uu
3 Move to the second level :
ii
4 Select a desired option on the second level :
UU uu
5 Move to the third level :
ii
6 Change the setting :
UU uu
, ENTER
OSD Initial language settings - Optional
1Turn the power on :
The language list appears POWER
2Select the language :
UU uu II ii
3 Press : ENTER
4To confirm press :
II ii
and ENTER
During the first use of this unit, the initial language setup menu
appears on your TV screen. You must complete initial language
selection before using the unit. English will be selected as the initial
language.
ON REMOTE
Initial Setting the Area Code - Optional
1Display setup menu : SETUP
2Select LOCK menu on the first level:
UU uu
3 Move to second level :
The activated Area Code appears on the
second level. :
ii
4 Move to the third level :
ii
5 Enter a new password : numerical buttons
(0-9) and ENTER
6 Recheck the entered new password : numerical buttons
(0-9) and ENTER
7 Select a code for a geographic area :
After select, Rating and Password will be
UU uu II
and
activated. (page 22) ENTER
8To confirm what you press :
Make sure to finish setting the Area Code
before leaving the setup menu if you cannot
set the rating and Password ENTER
When you use this unit for the first time, you have to set the Area
Code as shown below.
ON REMOTE
HW904PA-AHP_BHKGLLK_ENG_0777 3/25/09 9:36 PM Page 11
12
Adjusting the display settings
TV Aspect – Select which screen aspect to use based on the shape of your TV
screen.
[4:3] : Select when a standard 4:3 TV is connected.
[16:9] : Select when a 16:9 wide TV is connected.
Display Mode – If you selected 4:3, you’ll need to define how you would like
widescreen programs and films to be displayed on your TV screen.
[Letterbox] : This displays a widescreen picture with black bands at the top
and bottom of the screen.
[Panscan] : This fills the entire 4:3 screen, cropping the picture as necessary.
Adjusting the audio settings
DRC (Dynamic Range Control) – Make the sound clear when the volume is
turned down (Dolby Digital only). Set to [On] for this effect.
Vocal – Select [On] to mix karaoke channels into normal stereo.
This function is effective for multi-channel karaoke DVDs only.
HD AV Sync - Sometimes Digital TV encounters a delay between picture and
sound. If this happens you can compensate by setting a delay on the sound so
that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync. Use
UU uu
(on the remote control) to scroll up and down through the delay amount,
which you can set at anything between 0 and 300m sec.
5.1 Speaker Setup
ON REMOTE
1 Open the settings menu: SETUP
2 Select to the audio icon:
UU uu
3 Select right to enter the audio menu, then
select 5.1 Speaker Setup:
ii UU uu
ENTER
4Select the speaker you want to adjust:
II ii
5 Select a option and change
the settings:
UU uu II ii
6 Set the output level (volume) of a speaker:
from -5dB to +5dB.
The speaker size setting are
fixed, so you cannot change the setting.
II ii
7 If you connect speakers to your unit,
setting the Distance lets the speakers to
know how far the sound has to travel to
reach your set listening point. This allows
the sound from each speaker to reach the
listener at the same time.
II ii
8Test the signals of each speaker:
Adjust the volume to your taste
according to these signals.
II ii
9 Save your settings and exit the Setup
menu: RETURN
HW904PA-AHP_BHKGLLK_ENG_0777 3/25/09 9:36 PM Page 12
13
Adjusting the lock settings
To access the lock options, you must enter the 4-digit password. If you have not
yet entered a password you are prompted to do so. Enter a 4-digit password
then press ENTER. Enter it again then press ENTER to verify. If you make a
mistake while entering number, press CLEAR then correct it.
If you forget your password you can reset it. First, remove the disc in the unit.
Press SETUP to display the Setup menu. Input ‘210499’ and press ENTER.
The password has now been cleared.
Rating – Select a rating level. The lower the level, the stricter the rating. Select
[Unlock] to deactivate the rating.
Password – Sets or changes the password for lock settings.
[New] : Enter a new 4-digit password using the numerical buttons then press
ENTER. Enter the password again to confirm.
[Change] : Enter the new password twice after entering the current password.
Area Code – Select a code for a geographic area as the playback rating level.
This determines which area’s standards are used to rate DVDs controlled by the
parental lock. See the Area Codes on page 22.
Adjusting the others settings
DivX(R) VOD – We provide you with the DivX
®
VOD (Video On Demand)
registration code that allows you to rent and purchase videos using the DivX
®
VOD service.
For more information, visit www.divx.com/vod.
Press ENTER when [DivX(R) VOD] is highlighted and you can view the
registration code of the unit.
Enjoying a pre-programmed sound field
This system has a number of pre-set surround sound fields. You can select a
desired sound mode by using SPECIAL EQ/ NIGHT. You can change the
SPECIAL EQ/ NIGHT using
II ii
arrow key while the SPECIAL EQ/ NIGHT
information is displayed on.
The displayed items for the Equalizer may be different depending on sound
sources and effects.
NATURAL You can enjoy comfortable and natural sound.
AUTO EQ Realizes the sound equalizer that is the most similar to the
genre of which is included in the MP3 ID3 tag of song files.
POP This program lends an enthusiastic atmosphere to the
CLASSIC sound, giving you the feeling you are at an actual rock
JAZZ pop, jazz or classic concert.
ROCK
MP3 OPT This function is optimized for compressible MP3, WMA file.
It improves the bass sound.
BASS Reinforce the treble, bass and surround sound effect.
CLEAR VOICE This program make Voice sound clear, improving the
quality of voice sound. (We encourage to use this EQ
when you watch the movie of 5.1 channel.)
GAME EQ You can enjoy more virtual sound while playing video
games.
NIGHT MODE This may be useful when you want to watch movies at low
volums late at night.
CINEMA MODE You can enjoy more virtual sound while watching movies.
VIRTUAL You can enjoy more virtual surround sound.
PLII MOVIE Dolby Pro Logic II enables you to play stereo source on
PLII MUSIC 5-channel. (We encourage a person to use the PLII MTRX.)
PLII MTRX(matrix)
NORMAL(OFF) You can enjoy the sound without equalizer effect
ON DISPLAY Description
HW904PA-AHP_BHKGLLK_ENG_0777 3/25/09 9:36 PM Page 13
14
Displaying Disc Information - more you can do
You can select an item by pressing
UU uu
and change or select the setting by
pressing
II ii
.
Current title (or track/ file)
number/ total number of titles (or tracks/ files)
Current chapter number/ total number of chapters
Elapsed playing time
Selected audio language or channel
Selected subtitle
Selected angle/ total number of angles
Selected sound mode
Symbol Used in this Manual
All discs and file listed below MP3 files
DVD and finalized DVD±R/RW WMA files
DivX files
Audio CDs
Playing a Disc or file - more you can do
Playing a DVD that has a menu
Most DVDs now have menus which load first before the film begins to play. You
can navigate these menus using
UU uu II ii
to highlight an option.
Press PLAY (B) to select.
Skipping to the next/ previous chapter/ track/ file
Press SKIP (>) to move to the next chapter/ track/ file.
Press SKIP (.) to return to the beginning of the current chapter/ track/ file.
Press SKIP (.) twice briefly to step back to the previous chapter/ track/ file.
Pauseing playback
Press PAUSE/STEP (X) to pause playback. Press PLAY (B) to continue
playback.
Frame-by-Frame playback
Press PAUSE/STEP (X) repeatedly to play title Frame-by-Frame.
Playing repeatedly or randomly
Press REPEAT/RANDOM repeatedly, and the current title, chapter or track will
be played back repeatedly or randomly. To return to normal playback, press
REPEAT/RANDOM repeatedly.
- Random play mode : only music files.
ALL
DivXDVD
ALL
ALL
DVD
ACDDivX
WMA
DVD
MP3
ALL
Displaying Disc Information
1 Press DISPLAY :
DISPLAY
2 Select an item :
UU uu
3 Adjust the Display menu settings :
II ii
4To return the exit :
DISPLAY
ON REMOTE
Playing a Disc or file
ON REMOTE
1 Insert a disc on unit :
ZZ
OPEN/CLOSE
2 Select a DVD/CD : FUNCTION
3 Adjust the menu settings :
UU uu II ii
or Select a file from the menu :
UU uu
4Start the Disc playing :
BB
PLAY
5To stop the Disc playing :
xx
STOP
1/6
4/26
D
1 ENG
3/2.1CH
1 KOR
1/3
NORMAL
HW904PA-AHP_BHKGLLK_ENG_0777 3/25/09 9:36 PM Page 14
15
Fast forward or fast reverse
Press SCAN (m or M) to play fast forward or fast reverse during playback.
You can change the playback speed by pressing SCAN (m or M)
repeatedly. Press PLAY (B) to continue play at normal speed.
Selecting a subtitle language
During playback, press SUBTITLE () repeatedly to select a desired subtitle
language.
Slow down the playing speed
While playback is paused, press SCAN (bb or BB) to slow down forward or
reverse playback. You can change the various playback speed by pressing
SCAN (m or M) repeatedly. Press PLAY (B) to continue play at normal
speed. The DivX file cannot be slow down reverse playback.
1.5 times faster playback
Press PLAY (B) when a DVD is already playing to watch and listen to a DVD
1.5 times faster than normal playback speed. “B x1.5” will appear in the screen.
Press PLAY (B) again to return to normal playback speed.
Viewing the Title menu
Press TITLE to display the disc's title menu, if available.
Starting play from selected time
Searches for the starting point of entered time code. Press DISPLAY then
select clock icon. Enter a time then press ENTER. For example, to find a scene
at 1 hour, 10 minutes, and 20 seconds, enter “11020” by using numerical
buttons and press ENTER. If you enter the wrong number, press CLEAR to
enter again.
Last Scene Memory
This unit memorizes the last scene from the last disc that is viewed. The last
scene remains in memory even if you remove the disc from the player or switch
off (Stand-by mode) the unit. If you load a disc that has the scene memorized,
the scene is automatically recalled.
Mixed disc or USB Flash Drive – DivX, MP3/ WMA and JPEG
When playing a disc or USB Flash Drive containing with DivX, MP3/ WMA and
JPEG files together, you can select menu of files which you would like to play
by pressing MENU. If “This file has non-supperted type” pops up, select and
appropriate file by pressing MENU.
Viewing the DVD MENU
Press MENU to display the disc menu, if available.
Changing the character set to display DivX
®
subtitle correctly
If the subtitle does not display properly during playback, press and hold
SUBTITLE for about 3 seconds then press
II ii
or SUBTITLE to select another
language code until the subtitle is displayed properly and then press ENTER.
DivX file requirement
DivX disc compatibility with this player is limited as follows :
•Available resolution: within 720x576 (W x H) pixels
• The file name of the DivX subtitle should be entered within 45 characters.
• If there is impossible code to express in the DivX file, it may be displayed as
" _ " mark on the display.
• Frame rate : less than 30 fps
• If the video and audio structure of recorded files is not interleaved, either
video or audio is outputted.
• Playable DivX file : ".avi", ".mpg", ".mpeg", ".divx"
• Playable Subtitle format : SubRip (*.srt/ *.txt), SAMI (*.smi), SubStation Alpha
(*.ssa/ *.txt), MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/ *.txt)
Playable Codec format : "DIVX3.xx", "DIVX4.xx", "DIVX5.xx", "MP4V3",
"3IVX".
• Playable Audio format : "AC3", "DTS", "PCM", "MP3", "WMA".
• Sampling frequency : within 32 - 48 kHz (MP3), within 32 - 48kHz (WMA)
• Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)
• For Discs formatted in Live file system, you can not it on this player.
• If the name of movie file is different from that of the subtitle file, during
playback of a DivX file, subtitle may not be display.
• If you play a DivX file differ from DivX spec, it may not operate normally.
DivX
DivX
DVD
DVD
DivXDVD
DVD
DVD
DivXDVD
DivXDVD
ALL
HW904PA-AHP_BHKGLLK_ENG_0777 3/25/09 9:36 PM Page 15
16
Creating your own program
You can play the contents of a disc in the order you want by arranging the order
of the musics on the disc. To add a music(s) on the program list, press
PROG/MEMO to enter the program edit mode ( mark appears on the menu).
Select a desired music on the [List] by using the
UU uu
then press ENTER to add
the music to the program list. Select music from the program list then press
ENTER to start programmed playback. To clear a music from the program list,
select the music you want to clear by using the
UU uu
then press CLEAR in
program edit mode. To clear all music from the program list, select [Clear All]
then press ENTER in program edit mode. The program is cleared when the disc
is removed or the unit is turned off.
Displaying file information (ID3 TAG )
While playing an MP3/ WMA file containing file information, you can display the
information by pressing DISPLAY repeatedly.
MP3/ WMA music file requirement
MP3/ WMA disc compatibility with this player is limited as follows :
• Sampling frequency : within 32 - 48 kHz (MP3), within 32 - 48kHz (WMA)
• Bit rate : within 32 - 320kbps (MP3), 40 - 192kbps (WMA)
• Support Version : v2, v7, v8, v9
• Maximum files : Under 999.
• File extensions : “.mp3”/ “.wma”
• CD-ROM file format : ISO9660/ JOLIET
•We recommend that you use Easy-CD Creator, which creates an ISO 9660
file system.
Viewing photo files - more you can do
Viewing photo files as a slide show
Use
UU uu II ii
to highlight ( ) icon then press PLAY (B) to start slide Show.
You can change slide show speed using
II ii
when ( ) icon is highlighted.
Depending on the size and resolution of JPEG files, it may take longer for slide
show to be set.
Skipping to the next/ previous photo
Press SKIP (. or >) or
II ii
to view the previous/ next photo.
Rotating a photo
Use
UU uu
to rotate the photo in full screen counterclockwise or clockwise while
viewing a photo in full screen.
Pausing a slide show
Press PAUSE/STEP (X) to pause a slide show. Press PLAY (B)or
PAUSE/STEP (X) to continue the slide show.
Listening to music during slide show
You can listen to music during slide show, if the disc contain music and photo
files together. Use
UU uu II ii
to highlight ( ) icon then press PLAY (B) to start
slide show. This function is available only in disc.
Photo file requirement
JPEG disc compatibility with this player is limited as follows :
• Max pixel in width : 2760 x 2048 pixel
• Maximum files : Under 999.
• Some discs may not operate due to a different recording format or the
condition of disc.
• File extensions: “.jpg”
• CD-ROM file format : ISO9660/ JOLIET
MP3
E
WMAMP3ACD
Viewing photo files
ON REMOTE
1 Insert a disc on unit :
ZZ
OPEN/CLOSE
2 Select a DVD/CD : FUNCTION
3 Select a photo file :
UU uu
4Display the selected file in full screen :
BB
PLAY
5To return to the menu :
xx
STOP
HW904PA-AHP_BHKGLLK_ENG_0777 3/25/09 9:36 PM Page 16
17
Listening to the radio - more you can do
Looking for radio stations automatically
Press and hold TUN.-/ TUN.+ for more than a second. The tuner will scan
automatically and stop when it finds a radio station.
Deleting all the saved stations
Press and hold PROG./MEMO. for two seconds. ERASE ALL will flash up on
the DVD receiver display. Press PROG./MEMO. to erase all saved radio
stations.
Improving poor FM reception
Press PLAY (
BB
) (MO./ST.) on the remote control. This will change the tuner
from stereo to mono and usually improve the reception.
Listening to the radio
1Turn the power on : POWER
2Select either FM or AM : FUNCTION
3 Select a radio station : TUN.-/+
4To ‘save’ a radio station :
A preset number will show in the display. PROG/MEMO.
5 Select the preset number :
Up to 50 radio stations can be saved. PRESET
UU uu
6To confirm press : PROG/MEMO.
7To select a ‘saved’ station input the preset
number : PRESET
UU uu
Be sure that both FM and AM aerials are connected.
ON REMOTE
Home theater Speaker ez Set-up
1 Connect the unit’s OPTICAL IN jack to jack on
optical out of your TV (or Digital Device etc.).:-
2 Select the AUX OPT:
To select the AUX OPT directly TV
tt
HT SPK
3 Listen sound with 5.1(2.1 or 2)ch speaker.: -
4To escape from AUX OPT: TV
tt
HT SPK
Function is retuned to previous one.
Listen to sound from TV, DVD and Digital Device with 5.1(2.1 or 2)ch
mode. Even in power off mode, if you press TVtHT SPK, then power is
on and automatically changed to AUX OPT mode.
ON REMOTE
HW904PA-AHP_BHKGLLK_ENG_0777 3/25/09 9:36 PM Page 17
18
Compatible USB Devices
• MP3 Player : Flash type MP3 player.
• USB Flash Drive : Devices that support USB2.0 or USB1.1.
• The USB function of this unit does not support all USB devices.
USB device requirement
• Devices which require additional program installation when you have
connected it to a computer, are not supported.
Look out for the follows.
• Do not extract the USB device while in operation.
• For a large capacity USB, it may take longer than a few minute to be searched
•To prevent data loss, back up all data.
• If you use a USB extension cable or USB hub, the USB device is not
recognized.
• Using NTFS file system is not supported. (Only FAT(16/32) file system is
supported.
• This unit is not supported when the total number of files is 1000 or more.
• External HDD, Card readers, Locked devices, or hard type usb devices are
not supported.
• USB port of the unit cannot be connected to PC. The unit can not be used as
a storage device.
Using an USB device
1 Connect the USB device to the USB
port of the unit. -
2Select the USB function FUNCTION
3 Select a file you want to play
UU uu
4 Start your media playing
BB
PLAY
5To stop, press
xx
STOP
6 Before disconnecting the portable USB
device, change to any other function. FUNCTION
You can enjoy media files saved on an USB device by connecting the
USB device to the USB port of the unit.
If you want to operate other function, see the CD playback section.
ON REMOTE
HW904PA-AHP_BHKGLLK_ENG_0777 3/25/09 9:36 PM Page 18
19
Recording to USB - more you can do
Recording Music file in disc source to USB
One track recording
If the USB recording is played during playback of the CD, the one track/ file
would be recording into the USB.
All tracks recording
If the recording button is pressed at the CD stop, all tracks/ files would be
recording.
- The files in the sub-folders are not recorded during all track recording.
Program list recording
USB records after creating your own program if you want to record the track
you want (AUDIO CD Only).
When you are recording, look out for the following
•You can check the recording percentage rate for the USB record on the
screen during the recording.(AUDIO CD, MP3/ WMA CD only)
• During recording MP3/ WMA, there is no sound.
• When you stop recording during playback, the file that has been recorded at
that time will be stored.(AUDIO CD Only)
• Do not remove the USB device or turn off the unit during USB recording. If
not, an incomplete file may be made and not deleted on PC.
• Recording through microphones is not available.
• If USB recording does not work, the message like “NO USB”, “ERROR”,
“USB FULL” or “NO REC” is displayed on the display window.
• For the discs recorded in the format of DTS disc, USB recording is not
supported.
• Multi card reader device or external HDD can not be used for USB recording.
•Afile is recorded by 128Mbyte when you record for a long term.
• When you stop recording during playback, the file will not be stored.
• In the state CD-G, DTS disc USB record is not operated
•You may not record more than 999 files.
• It’ll be stored as follows.
Recording to USB
ON REMOTE
1 Connect the USB device to the unit -
2Select a mode in which you want
to record
(ex. CD/ TUNER....)
Play back a sound source first FUNCTION
If you want to record desired music file in
Disc to USB, record after playing back the file.
UU uu
and ENTER
3 Start the recording
zz
REC
4To stop recording, press
xx
STOP
The making of unauthorized copies of copy-protected material, including
computer programs, files, broadcasts and sound recordings, may be an
infringement of copyrights and constitute a criminal offense. This
equipment should not be used for such purposes.
Be responsible
Respect copyrights
MP3/ WMA
The other sources
(Tuner, AUX,
Portable)
AUDIO CD
HW904PA-AHP_BHKGLLK_ENG_0777 3/25/09 9:36 PM Page 19
20
Playing the iPod - more you can do
Pauseing playback
Press PAUSE/STEP (
XX
) or PLAY (
BB
) to pause playback. Press PAUSE/STEP
(
XX
) or PLAY (
BB
) to continue playback.
Skipping to the next/previous file
Press SKIP (
>>
) to move to the next file.
Press SKIP (
..
) to return to the beginning of the current file.
Press SKIP (
..
) twice briefly to step back to the previous file.
Fast forward or fast reverse
Audio files: During playback, press and hold SCAN (
mm
or
MM
) and then
release at a point you want.
Video files: During playback, press SCAN (
mm
or
MM
). Press PLAY (
BB
)
continue play at normal speed.
Playing repeatedly
Press REPEAT/RANDOM repeatedly to select an item to be repeated. The
current file will be played back repeatedly. To return to normal playback, press
REPEAT/RANDOM repeatedly. (
On video files, this function is not available.)
iPod message
“Please, check your iPod” - If the power of your iPod is insufficient or the
iPod is misconnected or unknown device. Reset the iPod if the iPod is not
operating normally (Refer to http://www.apple.com/support/)
“Connect Video Out(only composite) from the HTS to the TV and switch
TV input accordingly.”, “Please, Control through an iPod’s display.” -
When you connect the unit and TV to COMPONENT VIDEO OUT or HDMI
OUT, connect the unit and TV to VIDEO OUT.
Compatible iPod
• When the unit is connected with dock connector may result in malfunctions
• Compatibility with your iPod may vary depending on the type of your iPod.
• Depending on your iPod’s software version, it may not be possible to control
your iPod from the unit. We recommend installing the latest software version.
When you use iPod, look out for the following
•
Interference may happen depending on iPod devices.
• The video files are outputted only when you connect the unit to VIDEO OUT.
OSD iPod mode
Playing the iPod
1To open the iPod dock.: (On unit: iPod v)-
2 Connect your iPod to the dock on the front
of unit.: -
3Turn the power on: POWER
4Select the OSD iPod or iPod function: FUNCTION
5Select the menu:
UU uu
and ENTER
If you want to move backwards in the
menu, press MENU
6 Select a file:
UU uu
7 Start the file playing: B PLAY or ENTER
8To stop the file playing:
xx
STOP
9Before disconnecting the iPod, change to
any other function by pressing: FUNCTION
10 Remove the iPod:-
For detail refer to iPod guide.
iPod mode: You can operate your iPod by using the supplied remote
control and directly control on your iPod.
OSD iPod mode: You can operate your iPod by controlling OSD menu
on the TV screen with supplied remote control. The controls on your iPod
are not operational in the OSD iPod mode.
ON REMOTE
HW904PA-AHP_BHKGLLK_ENG_0777 3/25/09 9:36 PM Page 20
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
La pagina si sta caricando...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26

LG HW904PA Manuale del proprietario

LG
Marca
LG
Modello
HW904PA
Categoria
Lettori DVD
Tipo
Manuale del proprietario
Scarica PDF
rapporto

in altre lingue

Documenti correlati

Altri documenti