Sames Automatic spraying gun gun Manuale utente

Marca: Sames

Modello: Automatic spraying gun gun

Categoria: Spruzzatore di vernice

Tipo: Manuale utente

DOCUMENTATION

AUTOMATIC SPRAYING GUN

Manual : 582. 051.110-UK - 1904

Date: 19/04/19

Supersede : 06/07/17

Modif.:

TRANSLATION FROM THE ORIGINAL MANUAL

IMPORTANT : Before assembly and start-up, please read and clearly understand all the documents relating to

this equipment (professional use only).

THE PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR NOTICE..

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

SAMES KREMLIN N° : 578.112.130-1904

578.112.130 1904

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

FR UK DE

Pour une utilisation sure, Il est de votre

responsabilité de :

 Lire attentivement tous les documents contenus

dans le CD joint avant la mise en service de

l’équipement,

 D’installer, d’utiliser, d’entretenir et de réparer

l’équipement conformément aux préconisations de

SAMES KREMLIN ainsi qu’aux réglementations

nationales et/ou locales,

 Vous assurez que les utilisateurs de cet

équipement ont été formés, ont parfaitement compris

les règles de sécurité et qu’ils les appliquent.

To ensure safe use of the machinery, it is your

responsibility to:

 Carefully read all documents contained on the

enclosed CD before putting the machinery into service,

 Install, use, maintain and repair the machinery in

accordance with SAMES KREMLIN's

recommendations and national and/or local

regulations,

 Make sure that the users of the machinery have

received proper training and that they have perfectly

understood the safety rules and apply them.

Eine sichere Nutzung setzt voraus, dass Sie: :

 alle in der CD enthaltenen Dokumente vor der

Inbetriebnahme der Anlage aufmerksam lesen,

 die Anlage im Einklang mit den Empfehlungen von

SAMES KREMLIN sowie mit den nationalen und/oder

lokalen Bestimmungen installieren, verwenden,

warten und reparieren,

 sich vergewissern, dass die Nutzer dieser Anlage

angemessen geschult wurden, die

Sicherheitsbestimmungen verstanden haben und sie

anwenden.

ES IT PT

Para una utilización segura, será de su

responsabilidad:

 leer atentamente todos los documentos que se

incluyen en el CD adjunto antes de la puesta en

servicio del equipo,

 instalar, utilizar, efectuar el mantenimiento y

reparar el equipo con arreglo a las recomendaciones

de SAMES KREMLIN y a la normativa nacional y/o

local,

 cerciorarse de que los usuarios de este equipo han

recibido la formación necesaria, han entendido

perfectamente las normas de seguridad y las aplican.

Per un uso sicuro, vi invitiamo a:

 leggere attentamente tutta la documentazione

contenuta nel CD allegato prima della messa in

funzione dell'apparecchio,

 installare, utilizzare, mantenere e riparare

l'apparecchio rispettando le raccomandazioni di

SAMES KREMLIN, nonché le normative nazionali e/o

locali,

 accertarvi che gli utilizzatori dell'apparecchio

abbiano ricevuto adeguata formazione, abbiano

perfettamente compreso le regole di sicurezza e le

applichino.

Para uma utilização segura, é da sua

responsabilidade:

 Ler atentamente todos os documentos incluídos

no CD em anexo antes de pör o equipamento em

funcionamento,

 Proceder à instalação, utilização, manutenção e

reparação do equipamento de acordo com as

preconizações de SAMES KREMLIN, bem como com

outros regulamentos nacionais e/ou locais aplicáveis,

 Assegurar-se que os utilizadores do equipamento

foram devidamente capacitados, compreenderam

perfeitamente e aplicam as devidas regras de

segurança.

NL SE FI

Voor een veilig gebruik dient u:

 alle document op de bijgevoegde cd aandachtig te

lezen alvorens het apparaat in werking te stellen,

 het apparaat te installeren, gebruiken,

onderhouden en repareren volgens de door SAMES

KREMLIN gegeven aanbevelingen en overeenkomstig

de nationale en/of plaatselijke reglementeringen,

 zeker te stellen dat de gebruikers van dit apparaat

zijn opgeleid, de veiligheidsregels perfect hebben

begrepen en dat zij die ook toepassen.

För en säker användning av utrustningen ansvarar ni

för följande:

 Läs noga samtliga dokument som finns på den

medföljande cd-skivan innan utrustningen tas i drift.

 Installera, använd, underhåll och reparera

utrustningen enligt anvisningarna från SAMES

KREMLIN och enligt nationella och/eller lokala

bestämmelser.

 Försäkra er om att användare av denna utrustning

erhållit utbildning, till fullo förstått

säkerhetsföreskrifterna och tillämpar dem.

Käytön turvallisuuden varmistamiseksi

velvollisuutesi on:

 Lukea huolella kaikki CD:llä olevat asiakirjat ennen

laitteiston käyttöönottoa,

 Noudattaa laitteiston asennuksessa, käytössä,

kunnossapidossa ja huollossa SAMES KREMLIN in

suosituksia sekä kansallisia ja/tai paikallisia

määräyksiä,

 Varmistaa, että laitteiston käyttäjät ovat

koulutettuja ja ymmärtävät täysin

turvallisuusmääräykset ja miten niitä sovelletaan.

PL CS SL

Dla zapewnienia bezpiecznego użytkowania na

użytkowniku spoczywa obowiązek:

 Uważnego zapoznania się ze wszystkimi

dokumentami znajdującymi się na załączonej płycie CD

przed pierwszym uruchomieniem urządzenia,

 Instalowania, użytkowania, konserwacji i naprawy

urządzenia zgodnie z zaleceniami firmy SAMES

KREMLIN oraz z przepisami miejscowymi,

 Upewnienia, że wszyscy przeszkoleni użytkownicy

urządzenia zrozumieli zasady bezpieczeństwa i stosują

się do nich.

Pro bezpečné používání jste povinni:

 Před uvedením zařízení do provozu si pozorně

přečíst veškeré dokumenty obsažené na přiloženém

CD,

 Nainstalovat, používat, udržovat a opravovat

zařízení v souladu s pokyny firmy SAMES KREMLIN

a s národními a/nebo místními legislativními předpisy,

 Ujistit se, že uživatelé tohoto zařízení byli

vyškoleni, že dokonale pochopili bezpečnostní pravidla

a že je dodržují.

Za varno uporabo ste dolžni:

 natančno prebrati vse dokumente na CD pred

zagonom stroja,

 inštalirati, uporabljati, vzdrževati in popravljati

opremo po določilih SAMES KREMLIN in v skladu z

veljavnimi nacionalnimi in/ali lokalnimi predpisi,

 poskrbeti, da so uporabniki te opreme ustrezno

usposobljeni, poznajo varnostne predpise in da jih

upoštevajo.

SK HU RO

V záujme bezpečného je vašou povinnosťou:

 pozorne si prečítať všetky dokumenty obsiahnuté

na priloženom CD predtým, ako zariadenie uvediete do

prevádzky,

 nainštalovať, používať, udržiavať a opravovať

zariadenie v súlade s odporúčaniami spoločnosti

SAMES KREMLIN a národnými a/alebo miestnymi

predpismi,

 uistiť sa, že používatelia tohto zariadenia boli

zaškolení, riadne porozumeli pravidlám bezpečnosti a

používajú ich.

A biztonságos használat érdekében az Ön

felelőssége, hogy:

 a berendezés üzembe helyezése előtt figyelmesen

elolvassa a mellékelt CD által tartalmazott összes

dokumentumot,

 a berendezést a SAMES KREMLIN ajánlasainak

valamint a nemzeti és/vagy helyi szabályozásoknak

megfelelően helyezze üzembe, használja, tartsa

karban és javítsa,

 megbizonyosodjon róla, hogy a berendezés

felhasználói képzettek, tökéletesen megértették és

alkalmazzák a biztonsági előírásokat.

Pentru o utilizare sigură, este responsabilitatea dvs.

să:

 Citiţi cu atenţie toate documentele de pe CD-ul

anexat, înainte de punerea în funcţiune a

echipamentului,

 Instalaţi, utilizaţi, întreţineţi şi reparaţi

echipamentul conform instrucţiunilor SAMES

KREMLIN precum şi reglementărilor naţionale şi/sau

locale,

 Vă asiguraţi că utilizatorii acestui echipament au

fost instruiţi, au înţeles perfect regulile de securitate şi

le aplică integral.

Déclaration(s) de conformité au verso de ce document / Declaration(s) of conformity at the back of this document / Konformitätserklärung(en) auf der Rückseite dieser Unterlage

/ Declaración (es) de conformidad en el reverso de este documento / Dichiarazione/i di conformità sul retro del presente documento

/ Declaração(ções) de conformidade no verso do documento / Conformiteitsverklaring(en) op de keerzijde van dit document / Försäkran om överensstämmelse på omstående

sida av detta dokument / Vaatimustenmukaisuusvakuutukset tämän asiakirjan kääntöpuolella / Deklaracja(e) zgodności na odwrocie dokumentu

/ Prohlášení o shodě se nachází/nacházejí na zadní straně tohoto dokumentu / Deklaracija(e) o skladnosti na hrbtni strani tega dokumenta / Vyhlásenie/-a o zhode sa nachádzajú

na zadnej strane dokumentu / A dokumentum hátlapján szereplő megfelelőségi nyilatkoz(ok) / Declaraţii de conformitate pe versoul acestui document

SAMES KREMLIN - 2 - N° : 578.112.130-1904

DECLARATION UE DE CONFORMITE

UE DECLARATION OF CONFORMITY

EU- KONFORMITÄTSERKLÄRUNG

DECLARACIÓN UE DE CONFORMIDAD

DICHIARAZIONE DI CONFORMITÀ UE

DECLARAÇÃO UE DE CONFORMIDADE

EU-CONFORMITEITSVERKLARING

EU-FÖRSÄKRAN OM ÖVERENSSTÄMMELSE

EU- VAATIMUKSENMUKAISUUSVAKUUTUS

DEKLARACJA ZGODNOŚCI UE

EU PROHLÁŠENÍ O SHODĚ

IZJAVA EU O SKLADNOSTI

VYHLÁSENIE O ZHODE

EU-MEGFELELŐSÉGI NYILATKOZAT

DECLARAŢIA DE CONFORMITATE UE

Le fabricant / The manufacturer / Der Hersteller

/ El fabricante / Il produttore / O fabricante

/ De fabrikant / Tillverkare / Valmistaja / Producent / Výrobce

/ Proizvajalec / Výrobca / Gyártó / Fabricantul:

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - FRANCE

Tél. : 33 (0)4 76 41 60 60

Déclare que le matériel désigné ci-après / Herewith declares that the equipment / erklärt hiermit, dass die / Declara que el material designado a

continuación / Dichiara che il materiale sottoindicato / Declara que o material a seguir designado / verklaart dat de hieronder aangeduide apparatuur

/ Kungör att den utrustning som anges här nedan / ilmoittaa, että alla mainitut laitteistot / Oświadcza, że wymienione poniżej urządzenia / Prohlašuje,

že níže uvedené vybavení / Izjavlja, da je opisana oprema spodaj / Vyhlasuje, že zariadenie uvedené nižšie / Kijelenti, hogy a megjelölt anyag a

továbbiakban / Declară că echipamentul precizat mai jos:

PISTOLET AUTOMATIQUE DE PULVERISATION / AUTOMATIC SPRAYING GUN

AUTOMATIK LUFTSPRITZPISTOLE / PISTOLA AUTOMÁTICA DE PULVERIZACIÓN

# 151 120 300

Est conforme à la législation d’harmonisation de l’Union applicable suivante / Is in conformity with the relevant Union harmonisation legislation / Erfüllt

die einschlägigen Harmonisierungsrechtsvorschriften der Union / es conforme con la legislación de armonización pertinente de la Unión / è conforme

alla pertinente normativa di armonizzazione dell’Unione / in overeenstemming met de desbetteffende harmonisatiewetgeving van de Unie / med den

relevanta harmoniserade unionslagstiftningen / on asiaa koskevan unionin yhdenmukaistamislainsäädännön vaatimusten mukainen / jest zgodny z

odnośnymi wymaganiami unijnego prawodawstwa harmonizacyjnego / Shoduje se s následující příslušnou evropskou harmonizační legislativou

/ V skladu s harmonizirano zakonodajo Unije / Je v súlade s uplatniteľnými harmonizačnými právnymi predpismi EÚ / Megfelel a következő

alkalmazandó uniós harmonizációs szabályozásnak / Este conform cu legislaţia aplicabilă de armonizare de mai jos

Directive ATEX / ATEX Directive / ATEX Richtlinie / Directiva ATEX / Direttiva ATEX / Diretiva ATEX

/ ATEX-Richtijn / ATEX-direktivet / ATEX-direktivi / Dyrektywa ATEX / Směrnice ATEX / Direktiva ATEX / Smernica ATEX

/ ATEX-irányelv

2014/34/UE

II 2G IIA T6

EN 60079-0

EN 1953

La présente déclaration de conformité est établie sous la seule responsabilité du fabricant / This declaration of conformity is issued under the sole

responsibility of the manufacturer / Die alleinige Verantwortung für die Ausstellung dieser Konformitätserklärung trägt der Hersteller / La presente

declaración de conformidad se expide bajo la exclusiva responsabilidad del fabricante / La presente dichiarazione di conformità è rilasciata sotto la

responsabilità esclusiva del fabbricante / A presente declaração de conformidade é emitida sob a exclusiva responsabilidade do fabricante / Deze

conformiteitsverklaring wordt verstrekt onder volledige verantwoordelijkheid van de fabrikant / Denna försäkran om överensstämmelse utfärdas på

tillverkarens eget ansvar / Tämä vaatimustenmukaisuusvakuutus on annettu valmistajan yksinomaisella vastuulla / Niniejsza deklaracja zgodności

wydana zostaje na wyłączną odpowiedzianość producenta / Toto prohláŝení o skodě se vydává na výhradní odpovědnost výrobce / Za izdajo te izjave

o skladnosti je odgovoren izključno proizvajalec / Toto vyhlásenie o zhode sa vydáva / na vlastnú zodpovednosť výrobcu / Ezt a megfelelőségi

nylatkozatot a gyártó kizárólagos felelőssége mellett adják ti / Prezenta declaraţie de conformitate este emisă pe răspunderea exclusivă a

producătorului.

Hervé WALTER

Directeur Innovation & Développement / Innovation & Development

Director / Direktor für Innovation & Entwicklung / Director de

Inovación y Desarrollo / Direttore Innovazione e sviluppo

/ Diretor de Inovação / Manager Innovatie en Ontwikkeling / Direktör

för Forskning och Utveckling / Innovaatio- ja kehitysjohtaja

/ Dyrektor ds. Innowacji I Rozwoju / Ředitel pro inovace a vývoj

/ Direktor za inovacije in razvoj / Riaditeľ pre inováciu a rozvoj

/ Innovációs és fejlesztési igazgató / Director Inovaţie şi Dezvoltare

Fait à Meylan, le / Established in Meylan, on / Geschehen zu Meylan, am / En Meylan, a / Redatto a Meylan, / Vastgesteld te Meylan, / Utformat i

Meylan, den / Meylan, Ranska, / Sporządzono w Meylan, dnia / Meylan, dnia / V Meylanu, / V Meylan dňa / Kelt Meylanban, / Întocmită la Meylan,

pe data de 11/04/2019 - 04/11/2019

SAMES KREMLIN N° : 578.001.130-UK-1804

INSTALLATION AND SAFETY

INSTRUCTIONS

TRANSLATION FROM THE ORIGINAL MANUAL

IMPORTANT : Before assembly and start-up, please read and clearly understand all the

documents relating to this equipment (professional use only).

THE PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT

PRIOR NOTICE.

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

SAMES KREMLIN - 1 - N° : 578.001.130-UK-1804

1. SAFETY INSTRUCTIONS

GENERAL SAFETY INSTRUCTIONS

CAUTION : Th

e equipment can be dangerous if you do not follow our

instructions concerning installation and servicing described in this manual

and in accordance with applicable European standards and local national safety

regulations.

Please carefully read all the

instruction literature before operating your

equipment.

Only trained operators can use the equipment.

The foreman must ensure that the operator has understood the safety instructions for this equipment as

well as the instructions in the manuals for the different parts and accessories.

Read carefully all instruction manuals, label markings before operating the equipment.

Incorrect use may result in injury. This equipment is for professional use only. It must be used only for

what it has been designed for. Never modify the equipment. The parts and accessories supplied must be

regularly inspected. Defective or worn parts must be replaced.

Guards (motor cover, coupling shields, connectors,…) have been designed for a

safe use of the equipment.

The manufacturer will not be held responsible for bodily injury or failure and / or

property damage due to destruction, the overshadowing or the partial or total

removal of the guards.

Never exceed the equipment components' maximum working pressure.

Comply with regulations concerning safety, fire risks, electrical regulations in force in the country of final

destination of the material. Use only products or solvent compatible with the parts in contact with the

material (refer to data sheet of the material manufacturer).

PICTOGRAMS

NIP HAZARD WARNING

MOVING

ELEVATOR

WARNING

MOVING PARTS

WARNING

MOVING SHOVEL

DO NOT

EXCEED THIS

PRESSURE

HIGH

PRESSURE

HAZARD

RELIEF OR

DRAIN VALVE

WARNING

HOSE UNDER

PRESSURE

WEAR GLASSES

OBLIGATORY

WEAR OF

GLOVES IS

OBLIGATORY

PRODUCT

VAPOR

HAZARDS

WARNING

HOT PARTS OR

AREAS

ELECTRICAL

HAZARD

WARNING

FIRE HAZARDS

EXPLOSION

HAZARDS

GROUNDING WARNING

(USER)

WARNING

SERIOUS

INJURIES

SAMES KREMLIN - 2 - N° : 578.001.130-UK-1804

PRESSURE HAZARDS

Current legislation requires that an air relief valve be fitted in the air supply circuit to the air

motor to prevent over pressurisation. This safety feature,ensures that it is not possible to supply

the air motor with excessive air pressure that may cause injury.

Please ensure that a material drain valve is fitted in the fluid circuit to drain and depressurise the

circuit. Once depressurised and drained, work /servicing may then commence on the equipment

Please remember to close these valves when restarting the system.

HIGH PRESSURE INJECTION HAZARDS

When working with high pressure equipment, special care is required. Fluid leaks can occur.

There is a risk of material being injected to any exposed parts of body, this could cause severe

injury :

• medical care must be sought immediately if paint is injected under the skin or in other

parts of the body (eyes, fingers).

• never point the spray gun at any one. Never try to stop the spray with your hands or fingers

nor with rags or similars.

• follow the shut down procedure and always depressurize air and fluid circuits before

carrying out any servicing on the gun (cleaning, checking, maintenance of the material or

cleaning of the gun nozzles).

• for the guns equipped with a safety device, always lock the trigger when not in use.

FIRE - EXPLOSION - SPARKS - STATIC ELECTRICITY HAZARDS

A poor earth connection, inadequate ventilation, sparks or static electricity can cause an

explosion or fire. to avoid these risks when using or servicing SAMES KREMLIN equipment, the

following safety procedures must be followed :

• ensure a good earth connection and ground the parts to be handled i.e. solvents, materials,

components and equipment,

• ensure adequate ventilation,

• keep working area clean and free from waste solvents, chemicals, or solid waste i.e. rags,

paper and empty chemicals drums,

• never use electrical switches / power if in an atmosphere of volatile solvent vapour,

• stop working immediately in case of electrical arcs,

• never store chemicals and solvents in the working area.

• use paint whose flash point is the highest possible to prevent from any formation of gas

and inflammable vapours (refer to materials' safety instructions),

• install a cover on the drums to reduce the diffusion of gas and vapours in the spraybooth.

TOXIC PRODUCT HAZARDS

Toxic products or vapours can cause severe injury not only though contact with the body, but also

if the products are ingested or inhaled. It is imperative :

• to know the material products and their risks,

• notified or hazardous materials must be stored in accordance with the regulations,

• the material must be stored in an appropriate container, never place materials in a

container where there is a risk of spillage or leakage,

• a procedure must be applied for the safe disposal of waste material. It must comply with all

prevailing regulations and legislations of the country where the equipment is to be used,

• protective clothing should always be worn in compliance with the material manufacturers'

recommendations,

• depending on the application and chemical safety instructions, safety glasses, hearing

protective earplug, gloves, foot wear, protective masks and possible breathing equipment

should be worn to comply with the regulations (Refer to chapter "Safety equipment of

SAMES KREMLIN selection guide).

SAMES KREMLIN - 3 - N° : 578.001.130-UK-1804

CAUTION!

It is forbidden to use material containing high concentrations of halogenated hydrocarbon

solvents with aluminium or zinc fillers .Non-compliance with the instructions may cause

explosion risk causing serious or fatal injury.

EQUIPMENT REQUIREMENTS

Guards (motor cover, coupling shields, connectors,…) have been designed for

a safe use of the equipment.

The manufacturer will not be held responsible for bodily injury or failure

and / or property damage due to destruction, the overshadowing or the

partial or total removal of the guards.

PUMP

Before carrying out any work, it is imperative to read and clearly understand the disassembly and

reassembly instructions before servicing. The operator must understand the equipment and the

safety instructions. These instructions are available in the equipment manuals.

The air motor is designed to be mounted with a pump. Never modify any components or

couplings. When operating, please keep hands away from moving parts. Before starting up the

equipment, please read the PRESSURE RELIEF instructions. Please ensure that any relief or

drain valves fitted are in good working order.

HOSES

• Keep hoses out of circulation areas, moving parts or hot surfaces,

• Never expose product hoses to temperature higher than + 60°C / 140° F or lower than 0°C

/ 32° F,

• Never pull or use the hoses to move the equipment,

• Tighten all fittings as well as the hoses before operating the equipment,

• Check the hoses regularly; change them if they are damaged,

• Never exceed the maximum working pressure (MWP) indicated on the hose.

USED PRODUCTS

Considering the wide variety of products that are available and can be used in our equipment it is

impossible to check and make recommendations for all chemical data,regarding the risks of

possible chemical attack and their long term chemical reaction

SAMES KREMLIN can not be held liable for :

• compatibility of wetted parts,

• risks to staff and the surroundings,

• for worn or defective parts, for faulty equipment or units, or the qualitiy of final product.

It is the responsibility of the user to know and prevent any possible risks such as toxic vapours,

fires or explosions. He shall determine the risks of immediate reactions or pursuant to repeated

exposures of the staff,

SAMES KREMLIN shall not be liable for physical injuries, direct or indirect material damages

caused by the use of chemicals.

SAMES KREMLIN - 4 - N° : 578.001.130-UK-1804

2. HANDLING



Check the weight and the dimensions of the equipment

(



refer to 'Technical features' section of the instruction manual

If weight and dimensions are too important, the unloading must be carried out by means of a forklift or

any other appropriate means with a qualified personnal and in a clear horizontal area to prevent from

risks of damage injury or an accident.

The centre of gravity is not in the centre of the machine : carry out by hand a stability-test after having

lifted the whole at 10 cm / 3.937" maximum.

After the unloading, the handling of the whole (eg: elevator pump) is carried out by means of a pallet

truck taking the bottom part of the frame.

Remark : Each pump motor is fitted with a ring. The ring is designed for the hoisting of one

pump and can not be used for the handling of the complete assembly.

3. STORING

Storing before installation :

- Storing ambient temperature : 0 / +50 °C / 0 / +122°F

- Protect the whole against dust, water trickling, dampness and shocks.

Storing after installation :

- Operating temperature : +15 / +35 °C / +59 / +138.2° F

- Protect the whole against dust, water tricling, dampness and shocks.

4. INSTALLATION OF THE EQUIPMENT

The machine is installed on a stable horizontal floor (for eg a concrete flag).

The machine shall be made stable by the use of holding down bolts or by the use of other anchoring

methods, strong enough to prevent unintended bodily movement of the equipment.

To avoid risks caused by static electricity, the equipment as well as its components must

be grounded.

• For the pumping equipments (pumps, pneumatic rams, frame…), a section wire of 2.5

mm² is fixed on the material. Use this wire to connect the material to “the general ground”.

In case of severe environments (mechanical protection of the wire of earthing insufficient,

vibrations, mobile material…) where function damages at the ground are probable, the user

have to replace the provided wire of 2.5 mm² by a device more adapted to its environment

(wire with a more important section, bonding strip, fixing by thimble with eyelet…).

The continuity of the ground must be controlled by a qualified electrician. If the continuity of

the ground is not ensured, check the terminal, the wire and the earthing point. Never use the

material without have solved this problem.

• In the severe cases of environments (mechanical protection of the wire of earthing

insufficient, vibrations, mobile material…) where damages of the function put at the ground

are probable, the user will have to replace the wire of 2.5 mm² provided, by a device more

adapted to its environment (wire of more important section, bonding strip, fixing by thimble

with eyelet…),

• The gun must be 'grounded' via a material hose or an air hose. In case of spraying by

means of a gun with cup, the air hose must be conductive,

• The materials to be painted must also be grounded.

All the materials situated in the working area shall be grounded.

SAMES KREMLIN - 5 - N° : 578.001.130-UK-1804

• Never store more than necessary inflammable materials inside the working area,

• The materials must be stored into approved drums and grounded,

• Use only grounded metals containers for the use of cleaning solvents,

• Cardboard and paper are prohibited.

5. MARKING OF THE EQUIPMENT

Each equipment has a label plate with the name of the manufacturer, the equipment part number,

the interesting informations to use correctly the equipment (pressure, voltage,…) and sometimes

the above pictogram.

The equipment is designed with and consists of high quality materials and components which can

be re-used.

The 2012/19/UE European Directive covers all equipments with a crossed-out bin pictogram.

Please inform yourself about the collection systems for electric and electronic equipments.

Please act in accordance with local rules and do not dispose of old equipment with household

wastes. A correct disposal of old equipment will help prevent negative consequences for the

environment and health.

SAMES KREMLIN N° : 578.130.110-UK-1904

AUTOMATIC

SPRAYING

GUN

DISASSEMBLY / REASSEMBLY

TRANSLATION FROM THE ORIGINAL MANUAL

IMPORTANT : Before assembly and start-up, please read and clearly understand all the

documents relating to the equipment (professional use only).

THE PICTURES AND DRAWINGS ARE NOT CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT

PRIOR NOTICE.

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

SAMES KREMLIN - 1 - N° : 578.130.110-UK-1904

CAUTION :

Before any intervention on the gun, shut off the compressed air supply and

depressurize the circuits controlling the opening of the gun.

The gun is manufactured under the ATEX agreement and can not be modified.

SAMES KREMLIN will not be held responsible for any failure to comply with that instruction.

Gun : # 151.120.300 (stainless steel version with recirculation)

01. REPLACEMENT OF THE NOZZLE

- Unscrew the cap (18).

- Take off the seal (17) or replace it if necessary.

- Clean the cap, the seal and the threading of the gun aircap (12).

- Change the nozzle.

- Install the new nozzle on the cap then the seal and screw the cap on the gun head.

A 1

C 2

C 1

C 2

C 1

SAMES KREMLIN - 2 - N° : 578.130.110-UK-1904

02. DISASSEMBLY OF THE GUN FLUID PART

- Unscrew the cap (18).

- Take off the seal (17); replace it if necessary.

- Take off the nozzle.

- Clean the cap, the nozzle, the seal and the threading of the gun aircap (12).

- Remove the fittings (21 + 22) on the gun aircap (12).

- Remove the seat (19).

- Take off the washer (20).

- Unscrew the screws (13).

- Take off the gun head (12).

- Remove the packing gland (9).

- Take off the seals (10) and the 'M' washer (11).

- Clean the parts with a solvent compatible with the material to dispense.

- Check the parts carefully.

- Carry out the assembly on the reverse order of the disassembly. Use grease or glue during the

reassembly when necessary. During the assembly, change the seals (refer to package) and the

other parts, if necessary.

03. DISASSEMBLY OF THE PNEUMATIC PART

- Unscrew the screws (1).

- Take off the cover (2), the spring (27) and the seal ( 6).

- Take off the piston (4) and the needle (5). If the piston is hard to remove, use compressed air by

means of a blower and inject air through the fitting (23) and orientate the piston outlet downwards.

- Remove the seals (26) and (24).

- Unscrew the nut (3); take off the washer (25).

- Take off the piston needle.

- Clean the parts with a dry rag.

- Check the parts carefully.

- Carry out the assembly on the reverse order of the disassembly. Use light oil, grease or glue during

the reassembly when necessary. During the assembly, change the seals (refer to package) and

the other parts, if necessary.

Index Instruction Description Part number

A 1 PTFE grease 'TECHNILUB' grease

(10 ml / 0.0026 US gal) 560.440.101

C 1 Medium strength

Aneorobic Pipe sealant

Loctite 577

(250 ml / 0.066 US gal) 554.180.015

C 2 Low strength

Aneorobic Adhesive

Loctite 222

(50 ml / 0.013 US gal) 554.180.010

Doc. 573.423.050

Date/Datum/Fecha : 30/11/18

Annule/Cancels/

Ersetzt/Anula : 15/06/17

Modif. / Änderung : Ind. / Pos. 1

(# 933 151 275  88 123) Pièces de rechange

Spare parts list

Ersatzteilliste

Piezas de repuesto

PISTOLET AUTOMATIQUE

DE PULVERISATION

(version inox avec recirculation)

SPRAYING AUTOMATIC GUN,

(stainless steel version

with recirculation)

AUTOMATIK SPRITZPISTOLE

(Edelstahlversion

mit Zirkulation)

PISTOLA AUTOMÁTICA

DE PULVERIZACIÓN

(versión de inox con circulación)

151.120.300

SAMES KREMLIN 2 Doc. / Dok. 573.423.050

PISTOLET AUTOMATIQUE

DE PULVERISATION

(version inox avec recirculation)

SPRAYING AUTOMATIC GUN

(stainless steel version

with recirculation)

AUTOMATIK SPRITZPISTOLE

(Edelstahlversion

mit Zirkulation)

PISTOLA AUTOMÁTICA

DE PULVERIZACIÓN

(versión de inox con circulación)

151.120.300

Ind # Désignation Description Bezeichnung Denominación Qté

1 88 123 Vis CHc M 5x20 Screw,

model CHc M 5x20 Schraube CHc M5x20 Tornillo,

tipo CHc M 5x20 4

2 203 018 Couvercle Cover Deckel Tapa 1

3 953 010 014 Ecrou Nut Mutter Tuerca 1

4 203 016 Piston Piston Luftkolben Pistón 1

*5 203 014 Aiguille Needle Materialnadel Aguja 1

*6 NC / NS Joint Seal Dichtung Junta 1

7 NC / NS Vis acier HM 6x10 Screw, model HM 6x10 Schraube HM 6x10 Tornillo de acero,

tipo HM 6x10 2

8 203 020 Corps Body Körper Cuerpo 1

9 203 011 Ecrou de presse-étoupe Nut Packungsmutter Tuerca de prensa estopa 1

*10 NC / NS Joint Seal Dichtung Junta 5

11 203 012 Rondelle presse joint M M washer Stützring konvex Arandela prensa junta M 1

12 203 013 Tête inox Stainless steel head Kopf in Edelstahl Cabezal de inox 1

13 88 133 Vis CHc 6x18 Screw, model CHc 6x18 Schraube CHc 6x18 Tornillo, tipo CHc 6x18 2

16 552 236 Bouchon Plug Stopfen Tapón 1

*17 NC / NS Joint Seal Dichtung Junta 1

18 630 390 Chapeau Cap Düsenaufnahme Capucha 1

*19 630 387 Siège Seat Sitz Asiento 1

*20 NC / NS Rondelle Washer Scheibe Arandela 1

21 203 081 Raccord coudé Elbow fitting Winkelnippel Racor acodado 2

22 905 210 501 Raccord inox

M 1/8" NPT - M 1/2" JIC Stainless steel adapter,

model double male

1/8" NPT - 1/2" JIC

Anschluss, ES

AG 1/8" NPT

- AG 1/2" JIC

Adaptador de inox,

tipo M 1/8" NPT

- M 1/2" JIC

23 552 261 Raccord coudé

MF 1/8 G x T4

Elbow fitting,

model MF 1/8 G x T4

Winkel Steckanschluss,

AG 1/8 G x Schlauch 4 Racor acodado,

tipo MH 1/8 G x T4

*24 NC / NS Joint torique FPM FPM O-Ring O-Ring aus FPM Junta tórica FPM 1

25 NC / NS Rondelle frein Stop washer Sicherungsscheibe Arandela freno 1

*26 NC / NS Joint torique FKM FKM seal O-Ring aus FKM Junta tórica FKM 1

*27 203 017 Ressort Spring Feder Muelle 1

28 552 251 Raccord air droit

1/8 G x T4 Fitting,

model 1/8 G x T4 Gerader Steckanschluss,

AG 1/8“ G x Schlauch 4 Racor de aire recto,

tipo 1/8 G x T4 1

SAMES KREMLIN 3 Doc. / Dok. 573.423.050

Ind # Désignation Description Bezeichnung Denominación Qté

* 101 331 Pochette de joints

(ind. 6, 10, 17, 20, 24,

26)

Package of seals

(ind. 6, 10, 17, 20, 24,

26)

Dichtungsatz

(Pos. 6, 10, 17, 20, 24,

26)

Bolsa de juntas

(índ. 6, 10, 17, 20, 24,

26)

* Pièces de maintenance préconisées.

* Preceding the index number denotes a suggested spare part.

* Bezeichnete Teile sind empfohlene Ersatzteile.

* Piezas de mantenimiento preventivas.

N C : Non commercialisé.

N S : Denotes parts are not serviceable.

N S : Bezeichnete Teile gibt es nicht einzeln, sondern nur ko-

mplett .

N S : no suministrado.

SAMES KREMLIN N° : 578.132.110-UK-1706

SPRAYING AUTOMATIC GUN

PREVENTIVE MAINTENANCE

TRANSLATION FROM THE ORIGINAL MANUAL

IMPORTANT : Before assembly and start-up, please read and clearly understand all the

documents relating to the equipment (professional use only).

THE PICTURES AND DRAWINGS ARE NOT CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT

PRIOR NOTICE.

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

SAMES KREMLIN - 1 - N° : 578.132.110-UK-1706

Safety instructions :

• Never try to stop the spray fan with any part of the body (hands, fingers…) or with

rags. Never point the spray gun at anyone or at any part of the body.

• The operator will need medical attention if the high pressure material spray is in

contact with the the body (eyes, fingers…).

• Always lock the gun trigger with the safety device when not operating the gun.

• Always depressurize air and hoses before carrying out any servicing on the gun.

In order to protect the operator, protective clothing (gloves, respirator

mask, glasses, hearing protective earplug, clothes…) are required.

Use the equipment in a properly ventilated area.

This spray gun is a precision tool. Its correct functioning requires regular maintenance, carried out with

care. When it is carried out directly after use, the cleaning of the gun is faster and easier.

Never use metallic brushes, files or pliers when dismantling the gun.

 STOPPING FOR A SHORT TIME (LESS THAN THREE HOURS)

Leave the equipment as it is. In any case, if the tip becomes a little clogged with material, it is best to

clean it with a brush and some solvent.

 STOPPING WORK FOR A LONG TIME

Depressurise the material circuits.

Unscrew the tip from the gun, put it in solvent to soak and then brush it clean.

Flush the installation and leave it full of solvent.



Never soak the gun itself in solvent.

SAMES KREMLIN N° : 578.131.110-UK-1706

SPRAYING AUTOMATIC GUN

TROUBLESHOOTING GUIDE

TRANSLATION FROM THE ORIGINAL MANUAL

IMPORTANT : Before assembly and start-up, please read and clearly understand all the

documents relating to the equipment (professional use only).

THE PICTURES AND DRAWINGS ARE NOT CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT

PRIOR NOTICE.

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

SAMES KREMLIN - 1 - N° : 578.131.110-UK-1706

The spraying quality depends directly on the shape of the tip. It is recommended to replace it regularly to

get a constant fan pattern.

A prematury wearing makes the tip opening oval, thus resulting in two troubles :

- fan pattern reduced and charged at the center,

- higher output.

TROUBLE CAUSE SOLUTION

Material is no longer coming out

of the gun.

Clogged tip.

Check material supply circuit.

Cut the pressure on the pump.

Remove and clean the tip.

Depressurise the hoses.

Insufficient command air

pressure to open the gun. Check command air pressure

and increase it if necessary

Spray fan is not uniform :

horn formation.

Not enough pressure at the gun. Increase pump air supply

pressure.

Pump filter is clogged. Clean it.

Material viscosity is too high. Dilute the material.

Unappropriate tip. Use a smaller tip size or install an

appropriate diaphragm.

Excessive delivery in the middle

of spray Worn tip. Replace it.

Fluid cannot be sprayed. Use another kind of spray gun.

Spray fan is not uniform :

division into several fans. Tip partly clogged or damaged Clean or replace it.

Spray fan is not uniform :

Overload of stripes. Material cannot be atomized. Increase pump air supply

pressure and use an appropriate

diaphragm.

Fluid leak in front of the gun. Bad tightness between the

needle ball and its seat. Clean seat or replace needle and

seat.

Fluid leak around the needle. Worn fluid packing. Clean or replace it.

SAMES KREMLIN N° : 578.054.120-UK-1904

AUTOMATIC SPRAYING GUN

OPERATING PRINCIPLE

TRANSLATION FROM THE ORIGINAL MANUAL

IMPORTANT : Before assembly and start-up, please read and clearly understand all the

documents relating to the equipment (professional use only).

THE PICTURES AND DRAWINGS ARE NOT CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT

PRIOR NOTICE.

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

La pagina sta caricando ...

Sames Automatic spraying gun gun Manuale utente

Marca: Sames

Modello: Automatic spraying gun gun

Categoria: Spruzzatore di vernice

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: Sames Automatic spraying gun gun User manual
română: Sames Automatic spraying gun gun Manual de utilizare

Documenti correlati

Altri documenti

Lutz Pump Set B200 PVDF Istruzioni per l'uso