Sames 04C240 Manuale utente

DOCUMENTATION

PUMP 04C240

PNEUMATIC

Manual : 582.041.110-UK - 2203

Date : 31/03/22

Supersede : 27/02/19

Modif.: Update

TRANSLATION FROM THE ORIGINAL MANUAL

IMPORTANT : Before assembly and start-up, please read and clearly understand all the documents relating

to this equipment (professional use only).

THE PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR NOTICE.

SAMES KREMLIN SAS

l

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

SAMES KREMLIN N° : 578.123.130-1902

578.123.130 1902

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

FR UK DE

Pour une utilisation sure, Il est de votre

responsabilité de :

 Lire attentivement tous les documents contenus

dans le CD joint avant la mise en service de

l’équipement,

 D’installer, d’utiliser, d’entretenir et de réparer

l’équipement conformément aux préconisations de

SAMES KREMLIN ainsi qu’aux réglementations

nationales et/ou locales,

 Vous assurez que les utilisateurs de cet

équipement ont été formés, ont parfaitement compris

les règles de sécurité et qu’ils les appliquent.

To ensure safe use of the machinery, it is your

responsibility to:

 Carefully read all documents contained on the

enclosed CD before putting the machinery into service,

 Install, use, maintain and repair the machinery in

accordance with SAMES KREMLIN's

recommendations and national and/or local

regulations,

 Make sure that the users of the machinery have

received proper training and that they have perfectly

understood the safety rules and apply them.

Eine sichere Nutzung setzt voraus, dass Sie: :

 alle in der CD enthaltenen Dokumente vor der

Inbetriebnahme der Anlage aufmerksam lesen,

 die Anlage im Einklang mit den Empfehlungen von

SAMES KREMLIN sowie mit den nationalen und/oder

lokalen Bestimmungen installieren, verwenden,

warten und reparieren,

 sich vergewissern, dass die Nutzer dieser Anlage

angemessen geschult wurden, die

Sicherheitsbestimmungen verstanden haben und sie

anwenden.

ES IT PT

Para una utilización segura, será de su

responsabilidad:

 leer atentamente todos los documentos que se

incluyen en el CD adjunto antes de la puesta en

servicio del equipo,

 instalar, utilizar, efectuar el mantenimiento y

reparar el equipo con arreglo a las recomendaciones

de SAMES KREMLIN y a la normativa nacional y/o

local,

 cerciorarse de que los usuarios de este equipo han

recibido la formación necesaria, han entendido

perfectamente las normas de seguridad y las aplican.

Per un uso sicuro, vi invitiamo a:

 leggere attentamente tutta la documentazione

contenuta nel CD allegato prima della messa in

funzione dell'apparecchio,

 installare, utilizzare, mantenere e riparare

l'apparecchio rispettando le raccomandazioni di

SAMES KREMLIN, nonché le normative nazionali e/o

locali,

 accertarvi che gli utilizzatori dell'apparecchio

abbiano ricevuto adeguata formazione, abbiano

perfettamente compreso le regole di sicurezza e le

applichino.

Para uma utilização segura, é da sua

responsabilidade:

 Ler atentamente todos os documentos incluídos

no CD em anexo antes de pör o equipamento em

funcionamento,

 Proceder à instalação, utilização, manutenção e

reparação do equipamento de acordo com as

preconizações de SAMES KREMLIN, bem como com

outros regulamentos nacionais e/ou locais aplicáveis,

 Assegurar-se que os utilizadores do equipamento

foram devidamente capacitados, compreenderam

perfeitamente e aplicam as devidas regras de

segurança.

NL SE FI

Voor een veilig gebruik dient u:

 alle document op de bijgevoegde cd aandachtig te

lezen alvorens het apparaat in werking te stellen,

 het apparaat te installeren, gebruiken,

onderhouden en repareren volgens de door SAMES

KREMLIN gegeven aanbevelingen en overeenkomstig

de nationale en/of plaatselijke reglementeringen,

 zeker te stellen dat de gebruikers van dit apparaat

zijn opgeleid, de veiligheidsregels perfect hebben

begrepen en dat zij die ook toepassen.

För en säker användning av utrustningen ansvarar ni

för följande:

 Läs noga samtliga dokument som finns på den

medföljande cd-skivan innan utrustningen tas i drift.

 Installera, använd, underhåll och reparera

utrustningen enligt anvisningarna från SAMES

KREMLIN och enligt nationella och/eller lokala

bestämmelser.

 Försäkra er om att användare av denna utrustning

erhållit utbildning, till fullo förstått

säkerhetsföreskrifterna och tillämpar dem.

Käytön turvallisuuden varmistamiseksi

velvollisuutesi on:

 Lukea huolella kaikki CD:llä olevat asiakirjat ennen

laitteiston käyttöönottoa,

 Noudattaa laitteiston asennuksessa, käytössä,

kunnossapidossa ja huollossa SAMES KREMLIN in

suosituksia sekä kansallisia ja/tai paikallisia

määräyksiä,

 Varmistaa, että laitteiston käyttäjät ovat

koulutettuja ja ymmärtävät täysin

turvallisuusmääräykset ja miten niitä sovelletaan.

PL CS SL

Dla zapewnienia bezpiecznego użytkowania na

użytkowniku spoczywa obowiązek:

 Uważnego zapoznania się ze wszystkimi

dokumentami znajdującymi się na załączonej płycie CD

przed pierwszym uruchomieniem urządzenia,

 Instalowania, użytkowania, konserwacji i naprawy

urządzenia zgodnie z zaleceniami firmy SAMES

KREMLIN oraz z przepisami miejscowymi,

 Upewnienia, że wszyscy przeszkoleni użytkownicy

urządzenia zrozumieli zasady bezpieczeństwa i stosują

się do nich.

Pro bezpečné používání jste povinni:

 Před uvedením zařízení do provozu si pozorně

přečíst veškeré dokumenty obsažené na přiloženém

CD,

 Nainstalovat, používat, udržovat a opravovat

zařízení v souladu s pokyny firmy SAMES KREMLIN

a s národními a/nebo místními legislativními předpisy,

 Ujistit se, že uživatelé tohoto zařízení byli

vyškoleni, že dokonale pochopili bezpečnostní pravidla

a že je dodržují.

Za varno uporabo ste dolžni:

 natančno prebrati vse dokumente na CD pred

zagonom stroja,

 inštalirati, uporabljati, vzdrževati in popravljati

opremo po določilih SAMES KREMLIN in v skladu z

veljavnimi nacionalnimi in/ali lokalnimi predpisi,

 poskrbeti, da so uporabniki te opreme ustrezno

usposobljeni, poznajo varnostne predpise in da jih

upoštevajo.

SK HU RO

V záujme bezpečného je vašou povinnosťou:

 pozorne si prečítať všetky dokumenty obsiahnuté

na priloženom CD predtým, ako zariadenie uvediete do

prevádzky,

 nainštalovať, používať, udržiavať a opravovať

zariadenie v súlade s odporúčaniami spoločnosti

SAMES KREMLIN a národnými a/alebo miestnymi

predpismi,

 uistiť sa, že používatelia tohto zariadenia boli

zaškolení, riadne porozumeli pravidlám bezpečnosti a

používajú ich.

A biztonságos használat érdekében az Ön

felelőssége, hogy:

 a berendezés üzembe helyezése előtt figyelmesen

elolvassa a mellékelt CD által tartalmazott összes

dokumentumot,

 a berendezést a SAMES KREMLIN ajánlasainak

valamint a nemzeti és/vagy helyi szabályozásoknak

megfelelően helyezze üzembe, használja, tartsa

karban és javítsa,

 megbizonyosodjon róla, hogy a berendezés

felhasználói képzettek, tökéletesen megértették és

alkalmazzák a biztonsági előírásokat.

Pentru o utilizare sigură, este responsabilitatea dvs.

să:

 Citiţi cu atenţie toate documentele de pe CD-ul

anexat, înainte de punerea în funcţiune a

echipamentului,

 Instalaţi, utilizaţi, întreţineţi şi reparaţi

echipamentul conform instrucţiunilor SAMES

KREMLIN precum şi reglementărilor naţionale şi/sau

locale,

 Vă asiguraţi că utilizatorii acestui echipament au

fost instruiţi, au înţeles perfect regulile de securitate şi

le aplică integral.

Déclaration(s) de conformité au verso de ce document / Declaration(s) of conformity at the back of this document / Konformitätserklärung(en) auf der Rückseite dieser Unterlage

/ Declaración (es) de conformidad en el reverso de este documento / Dichiarazione/i di conformità sul retro del presente documento

/ Declaração(ções) de conformidade no verso do documento / Conformiteitsverklaring(en) op de keerzijde van dit document / Försäkran om överensstämmelse på omstående

sida av detta dokument / Vaatimustenmukaisuusvakuutukset tämän asiakirjan kääntöpuolella / Deklaracja(e) zgodności na odwrocie dokumentu

/ Prohlášení o shodě se nachází/nacházejí na zadní straně tohoto dokumentu / Deklaracija(e) o skladnosti na hrbtni strani tega dokumenta / Vyhlásenie/-a o zhode sa nachádzajú

na zadnej strane dokumentu / A dokumentum hátlapján szereplő megfelelőségi nyilatkoz(ok) / Declaraţii de conformitate pe versoul acestui document

SAMES KREMLIN - 2 - N° : 578.123.130-1902

DECLARATION UE DE CONFORMITE

EU DECLARATION OF CONFORMITY

EU- KONFORMITÄTSERKLÄRUNG

DECLARACIÓN UE DE CONFORMIDAD

DICHIARAZIONE DI CONFORMITÀ UE

DECLARAÇÃO UE DE CONFORMIDADE

EU-CONFORMITEITSVERKLARING

EU-FÖRSÄKRAN OM ÖVERENSSTÄMMELSE

EU- VAATIMUKSENMUKAISUUSVAKUUTUS

DEKLARACJA ZGODNOŚCI UE

EU PROHLÁŠENÍ O SHODĚ

IZJAVA EU O SKLADNOSTI

VYHLÁSENIE O ZHODE

EU-MEGFELELŐSÉGI NYILATKOZAT

DECLARAŢIA DE CONFORMITATE UE

Le fabricant / The manufacturer / Der Hersteller

/ El fabricante / Il produttore / O fabricante

/ De fabrikant / Tillverkare / Valmistaja / Producent / Výrobce

/ Proizvajalec / Výrobca / Gyártó / Fabricantul:

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - FRANCE

Tél. : 33 (0)4 76 41 60 60

Déclare que le matériel désigné ci-après / Herewith declares that the equipment / erklärt hiermit, dass die / Declara que el material designado a

continuación / Dichiara che il materiale sottoindicato / Declara que o material a seguir designado / verklaart dat de hieronder aangeduide apparatuur

/ Kungör att den utrustning som anges här nedan / ilmoittaa, että alla mainitut laitteistot / Oświadcza, że wymienione poniżej urządzenia / Prohlašuje,

že níže uvedené vybavení / Izjavlja, da je opisana oprema spodaj / Vyhlasuje, že zariadenie uvedené nižšie / Kijelenti, hogy a megjelölt anyag a

továbbiakban / Declară că echipamentul precizat mai jos:

POMPE INTENSIVE TM BASSE ET MOYENNE PRESSION POUR APPLICATION PNEUMATIQUE ET AIRMIX ®

A MOTEUR AVEC INVERSEUR / INTENSIVE TM AIRMIX ® & LOW PRESSURE PUMP - AIR MOTOR WITH

REVERSING BLOCK / INTENSIVE™ AIRMIX® PNEUMATISCHE PUMPE MIT UMSTEUERMOTOR

/ BOMBA NEUMÁTICA INTENSIVE TM Y BOMBA AIRMIX ® INTENSIVE TM CON MOTOR CON INVERSOR

04C240

Directive ATEX / ATEX Directive / ATEX Richtlinie / Directiva ATEX / Direttiva ATEX / Diretiva ATEX

/ ATEX-Richtijn / ATEX-direktivet / ATEX-direktivi / Dyrektywa ATEX / Směrnice ATEX / Директива ATEX

2014/34/UE

II 2G IIA T2

Procédure d’évaluation de la conformité : Module A Documentation technique (Annexe VIII) archivée par : / Conformity

assessment procedure: Module A Technical documentation (ANNEX VIII) recorded by: / Verfahren zur Konformitätsbewertung:

Modul A Technische Unterlagen (ANLAGE VIII) archiviert durch: / Procedimiento de evaluación de la conformidad: Módulo A

Documentación técnica (ANEXO VIII) archivada por: / Procedura di valutazione della conformità: Modulo A Documentazione

tecnica (ALLEGATO VIII) archiviata a cura di: / Procedimento de avaliação da conformidade: Módulo A Documentação técnica

(ANEXO VIII) arquivada por: / Conformiteitsbeoordelingsprocedure: Module A Technische documentatie (BIJLAGE VIII)

gearchiveerd door: / Förfarande för bedömning av överensstämmelse: Modul A Teknisk dokumentation (BILAGA VIII) arkiverad

av: / Vaatimustenmukaisuusarviointimenetelmä: moduuli A Tekninen dokumentaatio (LIITE VIII) arkistoitu:

/ Procedura oceny zgodności: Moduł A Dokumentacji technicznej (ZAŁĄCZNIK VIII) zarchiwizowane przez: / Postup

posuzování shody: Modul A Technická dokumentace (PŘÍLOHA VIII) archivována: / Процедура оценки соответствия: Модуль

A Техническая документация (ПРИЛОЖЕНИЕ VIII), архивированная:

ISSeP Zoning A. Schweitzer Rue de la Platinerie B - 7340 COLFONTAINE BELGIQUE

SAMES KREMLIN - 3 - N° : 578.123.130-1902

La présente déclaration de conformité est établie sous la seule responsabilité du fabricant / This declaration of conformity is issued under the sole

responsibility of the manufacturer / Die alleinige Verantwortung für die Ausstellung dieser Konformitätserklärung trägt der Hersteller / La presente

declaración de conformidad se expide bajo la exclusiva responsabilidad del fabricante / La presente dichiarazione di conformità è rilasciata sotto la

responsabilità esclusiva del fabbricante / A presente declaração de conformidade é emitida sob a exclusiva responsabilidade do fabricante / Deze

conformiteitsverklaring wordt verstrekt onder volledige verantwoordelijkheid van de fabrikant / Denna försäkran om överensstämmelse utfärdas på

tillverkarens eget ansvar / Tämä vaatimustenmukaisuusvakuutus on annettu valmistajan yksinomaisella vastuulla / Niniejsza deklaracja zgodności

wydana zostaje na wyłączną odpowiedzianość producenta / Toto prohláŝení o skodě se vydává na výhradní odpovědnost výrobce / Za izdajo te izjave

o skladnosti je odgovoren izključno proizvajalec / Toto vyhlásenie o zhode sa vydáva / na vlastnú zodpovednosť výrobcu / Ezt a megfelelőségi

nylatkozatot a gyártó kizárólagos felelőssége mellett adják ti / Prezenta declaraţie de conformitate este emisă pe răspunderea exclusivă a

producătorului.

Hervé WALTER

Directeur Innovation & Développement / Innovation & Development

Director / Direktor für Innovation & Entwicklung / Director de

Inovación y Desarrollo / Direttore Innovazione e sviluppo

/ Diretor de Inovação / Manager Innovatie en Ontwikkeling / Direktör

för Forskning och Utveckling / Innovaatio- ja kehitysjohtaja

/ Dyrektor ds. Innowacji I Rozwoju / Ředitel pro inovace a vývoj

/ Direktor za inovacije in razvoj / Riaditeľ pre inováciu a rozvoj

/ Innovációs és fejlesztési igazgató / Director Inovaţie şi Dezvoltare

Fait à Meylan, le / Established in Meylan, on / Geschehen zu Meylan, am / En Meylan, a / Redatto a Meylan, / Vastgesteld te Meylan, / Utformat i

Meylan, den / Meylan, Ranska, / Sporządzono w Meylan, dnia / Meylan, dnia / V Meylanu, / V Meylan dňa / Kelt Meylanban, / Întocmită la Meylan,

pe data de 15/02/2019 - 02/15/2019

SAMES KREMLIN N° : 578.001.130-UK-1804

INSTALLATION AND SAFETY

INSTRUCTIONS

TRANSLATION FROM THE ORIGINAL MANUAL

IMPORTANT : Before assembly and start-up, please read and clearly understand all the

documents relating to this equipment (professional use only).

THE PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT

PRIOR NOTICE.

SAMES KREMLIN SAS

l

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

SAMES KREMLIN - 1 - N° : 578.001.130-UK-1804

1. SAFETY INSTRUCTIONS

GENERAL SAFETY INSTRUCTIONS

CAUTION : Th

e equipment can be dangerous if you do not follow our

instructions concerning installation and servicing described in this manual

and in accordance with applicable European standards and local national safety

regulations.

Please carefully read all the

instruction literature before operating your

equipment.

Only trained operators can use the equipment.

The foreman must ensure that the operator has understood the safety instructions for this equipment as

well as the instructions in the manuals for the different parts and accessories.

Read carefully all instruction manuals, label markings before operating the equipment.

Incorrect use may result in injury. This equipment is for professional use only. It must be used only for

what it has been designed for. Never modify the equipment. The parts and accessories supplied must be

regularly inspected. Defective or worn parts must be replaced.

Guards (motor cover, coupling shields, connectors,…) have been designed for a

safe use of the equipment.

The manufacturer will not be held responsible for bodily injury or failure and / or

property damage due to destruction, the overshadowing or the partial or total

removal of the guards.

Never exceed the equipment components' maximum working pressure.

Comply with regulations concerning safety, fire risks, electrical regulations in force in the country of final

destination of the material. Use only products or solvent compatible with the parts in contact with the

material (refer to data sheet of the material manufacturer).

PICTOGRAMS

A

D

F

E

C

G

NIP HAZARD WARNING

MOVING

ELEVATOR

WARNING

MOVING PARTS

WARNING

MOVING SHOVEL

DO NOT

EXCEED THIS

PRESSURE

HIGH

PRESSURE

HAZARD

H

J

L

K

M

Q

RELIEF OR

DRAIN VALVE

WARNING

HOSE UNDER

PRESSURE

WEAR GLASSES

OBLIGATORY

WEAR OF

GLOVES IS

OBLIGATORY

PRODUCT

VAPOR

HAZARDS

WARNING

HOT PARTS OR

AREAS

N

P

R

ELECTRICAL

HAZARD

WARNING

FIRE HAZARDS

EXPLOSION

HAZARDS

GROUNDING WARNING

(USER)

WARNING

SERIOUS

INJURIES

SAMES KREMLIN - 2 - N° : 578.001.130-UK-1804

PRESSURE HAZARDS

Current legislation requires that an air relief valve be fitted in the air supply circuit to the air

motor to prevent over pressurisation. This safety feature,ensures that it is not possible to supply

the air motor with excessive air pressure that may cause injury.

Please ensure that a material drain valve is fitted in the fluid circuit to drain and depressurise the

circuit. Once depressurised and drained, work /servicing may then commence on the equipment

Please remember to close these valves when restarting the system.

HIGH PRESSURE INJECTION HAZARDS

When working with high pressure equipment, special care is required. Fluid leaks can occur.

There is a risk of material being injected to any exposed parts of body, this could cause severe

injury :

• medical care must be sought immediately if paint is injected under the skin or in other

parts of the body (eyes, fingers).

• never point the spray gun at any one. Never try to stop the spray with your hands or fingers

nor with rags or similars.

• follow the shut down procedure and always depressurize air and fluid circuits before

carrying out any servicing on the gun (cleaning, checking, maintenance of the material or

cleaning of the gun nozzles).

• for the guns equipped with a safety device, always lock the trigger when not in use.

FIRE - EXPLOSION - SPARKS - STATIC ELECTRICITY HAZARDS

A poor earth connection, inadequate ventilation, sparks or static electricity can cause an

explosion or fire. to avoid these risks when using or servicing SAMES KREMLIN equipment, the

following safety procedures must be followed :

• ensure a good earth connection and ground the parts to be handled i.e. solvents, materials,

components and equipment,

• ensure adequate ventilation,

• keep working area clean and free from waste solvents, chemicals, or solid waste i.e. rags,

paper and empty chemicals drums,

• never use electrical switches / power if in an atmosphere of volatile solvent vapour,

• stop working immediately in case of electrical arcs,

• never store chemicals and solvents in the working area.

• use paint whose flash point is the highest possible to prevent from any formation of gas

and inflammable vapours (refer to materials' safety instructions),

• install a cover on the drums to reduce the diffusion of gas and vapours in the spraybooth.

TOXIC PRODUCT HAZARDS

Toxic products or vapours can cause severe injury not only though contact with the body, but also

if the products are ingested or inhaled. It is imperative :

• to know the material products and their risks,

• notified or hazardous materials must be stored in accordance with the regulations,

• the material must be stored in an appropriate container, never place materials in a

container where there is a risk of spillage or leakage,

• a procedure must be applied for the safe disposal of waste material. It must comply with all

prevailing regulations and legislations of the country where the equipment is to be used,

• protective clothing should always be worn in compliance with the material manufacturers'

recommendations,

• depending on the application and chemical safety instructions, safety glasses, hearing

protective earplug, gloves, foot wear, protective masks and possible breathing equipment

should be worn to comply with the regulations (Refer to chapter "Safety equipment of

SAMES KREMLIN selection guide).

SAMES KREMLIN - 3 - N° : 578.001.130-UK-1804

CAUTION!

It is forbidden to use material containing high concentrations of halogenated hydrocarbon

solvents with aluminium or zinc fillers .Non-compliance with the instructions may cause

explosion risk causing serious or fatal injury.

EQUIPMENT REQUIREMENTS

Guards (motor cover, coupling shields, connectors,…) have been designed for

a safe use of the equipment.

The manufacturer will not be held responsible for bodily injury or failure

and / or property damage due to destruction, the overshadowing or the

partial or total removal of the guards.

PUMP

Before carrying out any work, it is imperative to read and clearly understand the disassembly and

reassembly instructions before servicing. The operator must understand the equipment and the

safety instructions. These instructions are available in the equipment manuals.

The air motor is designed to be mounted with a pump. Never modify any components or

couplings. When operating, please keep hands away from moving parts. Before starting up the

equipment, please read the PRESSURE RELIEF instructions. Please ensure that any relief or

drain valves fitted are in good working order.

HOSES

• Keep hoses out of circulation areas, moving parts or hot surfaces,

• Never expose product hoses to temperature higher than + 60°C / 140° F or lower than 0°C

/ 32° F,

• Never pull or use the hoses to move the equipment,

• Tighten all fittings as well as the hoses before operating the equipment,

• Check the hoses regularly; change them if they are damaged,

• Never exceed the maximum working pressure (MWP) indicated on the hose.

USED PRODUCTS

Considering the wide variety of products that are available and can be used in our equipment it is

impossible to check and make recommendations for all chemical data,regarding the risks of

possible chemical attack and their long term chemical reaction

SAMES KREMLIN can not be held liable for :

• compatibility of wetted parts,

• risks to staff and the surroundings,

• for worn or defective parts, for faulty equipment or units, or the qualitiy of final product.

It is the responsibility of the user to know and prevent any possible risks such as toxic vapours,

fires or explosions. He shall determine the risks of immediate reactions or pursuant to repeated

exposures of the staff,

SAMES KREMLIN shall not be liable for physical injuries, direct or indirect material damages

caused by the use of chemicals.

SAMES KREMLIN - 4 - N° : 578.001.130-UK-1804

2. HANDLING



Check the weight and the dimensions of the equipment

(



refer to 'Technical features' section of the instruction manual

If weight and dimensions are too important, the unloading must be carried out by means of a forklift or

any other appropriate means with a qualified personnal and in a clear horizontal area to prevent from

risks of damage injury or an accident.

The centre of gravity is not in the centre of the machine : carry out by hand a stability-test after having

lifted the whole at 10 cm / 3.937" maximum.

After the unloading, the handling of the whole (eg: elevator pump) is carried out by means of a pallet

truck taking the bottom part of the frame.

Remark : Each pump motor is fitted with a ring. The ring is designed for the hoisting of one

pump and can not be used for the handling of the complete assembly.

3. STORING

Storing before installation :

- Storing ambient temperature : 0 / +50 °C / 0 / +122°F

- Protect the whole against dust, water trickling, dampness and shocks.

Storing after installation :

- Operating temperature : +15 / +35 °C / +59 / +138.2° F

- Protect the whole against dust, water tricling, dampness and shocks.

4. INSTALLATION OF THE EQUIPMENT

The machine is installed on a stable horizontal floor (for eg a concrete flag).

The machine shall be made stable by the use of holding down bolts or by the use of other anchoring

methods, strong enough to prevent unintended bodily movement of the equipment.

To avoid risks caused by static electricity, the equipment as well as its components must

be grounded.

• For the pumping equipments (pumps, pneumatic rams, frame…), a section wire of 2.5

mm² is fixed on the material. Use this wire to connect the material to “the general ground”.

In case of severe environments (mechanical protection of the wire of earthing insufficient,

vibrations, mobile material…) where function damages at the ground are probable, the user

have to replace the provided wire of 2.5 mm² by a device more adapted to its environment

(wire with a more important section, bonding strip, fixing by thimble with eyelet…).

The continuity of the ground must be controlled by a qualified electrician. If the continuity of

the ground is not ensured, check the terminal, the wire and the earthing point. Never use the

material without have solved this problem.

• In the severe cases of environments (mechanical protection of the wire of earthing

insufficient, vibrations, mobile material…) where damages of the function put at the ground

are probable, the user will have to replace the wire of 2.5 mm² provided, by a device more

adapted to its environment (wire of more important section, bonding strip, fixing by thimble

with eyelet…),

• The gun must be 'grounded' via a material hose or an air hose. In case of spraying by

means of a gun with cup, the air hose must be conductive,

• The materials to be painted must also be grounded.

All the materials situated in the working area shall be grounded.

SAMES KREMLIN - 5 - N° : 578.001.130-UK-1804

• Never store more than necessary inflammable materials inside the working area,

• The materials must be stored into approved drums and grounded,

• Use only grounded metals containers for the use of cleaning solvents,

• Cardboard and paper are prohibited.

5. MARKING OF THE EQUIPMENT

Each equipment has a label plate with the name of the manufacturer, the equipment part number,

the interesting informations to use correctly the equipment (pressure, voltage,…) and sometimes

the above pictogram.

The equipment is designed with and consists of high quality materials and components which can

be re-used.

The 2012/19/UE European Directive covers all equipments with a crossed-out bin pictogram.

Please inform yourself about the collection systems for electric and electronic equipments.

Please act in accordance with local rules and do not dispose of old equipment with household

wastes. A correct disposal of old equipment will help prevent negative consequences for the

environment and health.

SAMES KREMLIN N° : 578.165.110-UK-2203

AIRSPRAY

PNEUMATIC PUMP

04C240

Disassembly / Reassembly

TRANSLATION FROM THE ORIGINAL MANUAL

IMPORTANT : Before assembly and start-up, please read and clearly understand all the

documents relating to the equipment (professional use only).

THE PICTURES AND DRAWINGS ARE NOT CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT

PRIOR NOTICE.

SAMES KREMLIN SAS

l

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

SAMES KREMLIN - 1 - N° : 578.165.110-UK-2203

CAUTION :

Before any action on the pump, shut off the compressed air supply and

depressurize the system.

The pump is manufactured under the ATEX agreement and can not be modified.

SAMES KREMLIN will not be held responsible for any failure to comply with that instruction.

Guards (air motor cover, coupling shields, housings …) have been designed for

safe use of the equipment.

The manufacturer will not be held responsible for bodily injury or failure and / or

damage to property due to removal or partial removal of the guards

 SUCTION VALVE (REFER TO DOC. 573.049.050)

Unscrew suction valve (16) - (If cylinder (2) remains attached to the suction valve, unscrew the

whole. Then, hold cylinder (2) by inserting a rod into the cylinder holes designed for this

purpose).

The ball (17) is secured on the valve (16) by means of a circlips (18).

Clean the parts.

Reinstall suction valve (16) and seal (19). Replace them if necessary.

 CYLINDER

In order to make easier the disassembly, a hole is drilled in the cylinder (2) at each end.

In relation to the part which is unscrewed first, insert a rod into one of these holes to unscrew the

other part.

When reassembling be certain the two seals (19) are installed.

 EXHAUST VALVE AND MOBILE PACKING

Unscrew cylinder (2) and pull it downwards.

Unscrew exhaust valve (6) by holding piston (3).

Remove ball (8) and mobile packing (cup seal ind. 7).

Clean the parts and reinstall them. Replace seals if necessary.

SAMES KREMLIN - 2 - N° : 578.165.110-UK-2203

 UPPER PACKING

Separate motor piston rod from hydraulic piston (3).

Unscrew wetting-cup (4) by means of the wrench

supplied with the pump.

Remove cylinder (2) and pull piston (3) downwards

to remove upper packing seals (10 and 11).

Reinstall parts in reverse order. Be certain seals

(10 and 11) are installed properly (direction,

order and assembly dimension). On the support

washer (12), it is compulsory to install seal (11)

and then seal (12) according to the opposite

scheme.

Tighten wetting-cup (4) on upper flange (1).

After reassembly, fill up the pump with solvent

and increase pressure to maximum in the fluid

section. Then stop the pump and open exhaust

valve to depressurize.

Retighten wetting-cup (4) by means of the

wrench, in order to be in accordance with the

opposite drawing.

41

11

10

3 à 8 mm

12

 REVERSING BLOCK (REFER TO DOC. 573.087.040)

Guards (air motor cover, coupling shields, housings …) have been designed for

safe use of the equipment.

The manufacturer will not be held responsible for bodily injury or failure and / or

damage to property due to removal or partial removal of the guards

Disassemble cover (32) by removing screws CHc (33).

Dissociate female yoke (12) from reversing block lever (9).

Dismount reversing block by removing screws (10 and 8).

Reinstall the new reversing block in the reverse order of the

disassembly sequence.

CAUTION : The number

of spirals must equally be

distributed on each fastening parts in order to get the above

dimension.

31.85 mm ±0.5

Before reassembling the different components :

Clean the parts with the appropriate cleaning solvent,

Install new seals if it is necessary, after having lubricated them with PTFE grease.

Lubricate the piston and the inside of the cylinder to prevent from damaging the seals.

Install new parts if it is necessary.

9

SAMES KREMLIN - 3 - N° : 578.165.110-UK-2203

 ASSEMBLY INSTRUCTIONS

4

13

10

12

11

9

7

8

6

2

1

3

22

19

18

17

16

15

23

A 2

A 1

C 1

A 2

A 1

A 2

A 1

A 2

Index Instruction Description Part number

A 1 PTFE grease 'TECHNILUB' grease

(10 ml / 0.0026 US gal) 560.440.101

A 2 Anti-seize grease Grease box (450 g / 0.99 lb) 560.420.005

C 1 Medium strength

Aneorobic Pipe sealant

Loctite 5772 (50 ml / 0.013 US gal) 554.180.015

Doc. 573.072.050

Date/Datum/Fecha : 14/02/19

Annule/Cancels/

Ersetzt/Anula : 17/11/14

Modif. / Änderung : Mise à jour

/ Update / Aktualisierung

/ Actualización

KREMLIN REXSON  SAMES

KREMLIN; 04-120  04C240

+ Ind. / Pos.24 (051 790 201

 905 210 203)

Pièces de rechange

Spare parts list

Ersatzteilliste

Piezas de repuesto

POMPE PNEUMATIQUE, modèle 04C240 AIRSPRAY PNEUMATIC PUMP,

model 04C240

NIEDERDRUCK PUMPE, Modell 04C240 BOMBA NEUMÁTICA, tipo 04C240

SAMES KREMLIN 2 Doc. / Dok. : 573.072.050

POMPE MURALE, modèle 04C240

sans filtre, ni cannes WALL MOUNTED PUMP, model 04C240

without filter or rods #

WANDANLAGE, Modell 04C240

ohne Filter und Schläuche BOMBA MURAL, tipo 04C240

sin filtro y cañas 151.792.100

Ind # Désignation Description Bezeichnung Denominación Qté

- 151 792 000 Pompe 04C240 nue Bare pump,

model 04C240 Pumpe 04C240, nackt Bomba sola, tipo

04C240 1

*1 146 260 000  Moteur 500-4

(voir Doc. 573.031.050)  Air motor, model 500-4

(refer to Doc.

573.031.050)

 Luftmotor 500-4

(siehe Dok. 573.031.050)  Motor, tipo 500-4

(consultar Doc.

573.031.050)

1

*2 144 970 000  Hydraulique C240

(voir Doc. 573.049.050)  Fluid section, model

C240

(refer to Doc.

573.049.050)

 Hydraulikteil C240

(siehe Dok. 573.049.050)  Hidráulica, tipo C240

(consultar Doc.

573.049.050)

1

3 051 770 001  Tirant  Tie-rod, connecting  Bolzen  Tirante 4

4 953 010 021  Ecrou HM 10  Nut, HM 10  Mutter HM 10  Tuerca HM 10 4

5 963 040 021  Rondelle MN 10  Washer, MN 10  Scheibe MN 10  Arandela MN 10 4

- 050 311 902  Ressort de protection  Protective spring  Feder  Muelle de protección 1

*- 151 775 010 Ensemble fixation Mounting assembly Montageplatte kpl. Conjunto de fijación 1

6 051 770 101  Plaque d’interface  Plate  Befestigungsplatte  Placa 1

7 933 011 279  Vis H 8 x 20  Screw, model H 8 x 20  Schraube M 8 x 20  Tornillo, tipo H 8 x 20 1

8 933 151 147  Vis CHc M 8 x 10  Screw,

model CHc M 8 x 10  Schraube

CHc M 8 x 10  Tornillo,

tipo CHc M 8 x 10 1

9 NC / NS  Vis HM 8 x 25  Screw,

model HM 8 x 25  Schraube HM 8 x 25  Tornillo,

tipo HM 8 x 25 2

14 88 664  Rondelle W8  Washer, model W8  Scheibe W8  Arandela, tipo W8 2

15 963 040 019  Rondelle MN 8  Washer, model MN 8  Scheibe MN 8  Arandela, tipo MN 8 2

16 953 010 019  Ecrou HM 8  Nut, model HM 8  Mutter, model HM 8  Tuerca, tipo HM 8 2

10 151 790 170 Equipement d'air (air

moteur)

(voir Doc. 573.403.050)

Air supply (motor air)

(refer to Doc.

573.403.050)

Luftausrüstung

(Luftmotor) (siehe Dok.

573.403.050)

Equipo de aire (aire

motor) (consultar Doc.

573.403.050)

1

13 905 150 012 Raccord coudé cannelé

M 1/4 BSP - T 8x12 Elbow connector

M 1/4 BSP - T 8x12 Winkelnippel,

AG 1/4 BSP - T 8x12 Racor acodado

M 1/4 BSP - T 8x12 1

18 050 102 448 Raccord inox

M 1" BSP - M 26 x 125

(entrée produit)

Fitting, stainless steel,

double male,

1" BSP - 26 x 125

(fluid inlet)

Doppelnippel, Edelstahl

AG 1" BSP - M 26 x 1,25

(Materialeingang)

Racor inox

M 1" BSP - M 26 x 125

(entrada producto)

1

SAMES KREMLIN 3 Doc. / Dok. : 573.072.050

POMPE MURALE, modèle 04C240

avec filtre et cannes WALL MOUNTED PUMP, model 04C240

with filter and rods #

WANDANLAGE, Modell 04C240

mit Filter und Schläuche BOMBA MURAL, tipo 04C240

con filtro y cañas 151.792.200

Ind # Désignation Description Bezeichnung Denominación Qté

- 151 792 100 Pompe murale sans filtre,

ni cannes Wall mounted pump

without filter or rods Wandpumpe ohne Filter

und Schläuche Bomba mural sin filtro ni

cañas 1

20 149 596 150 Canne d'aspiration Ø 25

(Lg. 600 mm) Suction rod Ø 25

(Length 600 mm) Saugschlauch Ø 25

(Länge 600 mm) Caña de aspiración Ø 25

(Longitud 600 mm) 1

21 149 596 152  Crépine Ø 25  Strainer Ø 25  Siebkörbe Ø 25  Piña Ø 25 1

22 155 580 300 Filtre AIRMIX® inox 3/8

(voir Doc. 573.299.050) AIRMIX® filter 3/8,

stainless steel (refer to

Doc. 573.299.050)

AIRMIX® Filter, 3/8

Edelstahl

(siehe Dok. 573.299.050)

Filtro AIRMIX® inox 3/8

(consultar Doc.

573.299.050)

1

23 055 580 301 Manchon inox

MM 3/8 NPT Sleeve, stainless steel

MM 3/8 NPT Muffe, Edelstahl

AG 3/8 NPT Manguito inox

MM 3/8 NPT 1

24 905 210 203 Raccord inox

M 1/2 - F 3/8 Fitting, stainless steel

M 1/2 - F 3/8 Nippel, Edelstahl

AG 1/2 - IG 3/8 Racor inox

M 1/2 - H 3/8 1

25 049 596 000 Canne de purge inox Drain rod, stainless steel Entleerungsschlauch,

Edelstahl Caña de purga inox 1

26 050 123 533 Raccord

M 3/8 NPS - F 1/2 JIC Fitting,

M 3/8 NPS - F 1/2 JIC Nippel

AG 3/8 NPS - IG 1/2 JIC Racor ,

M 3/8 NPS - H 1/2 JIC 1

POMPE 04C240 SUR CHARIOT CART MOUNTED PUMP, model 04C240 #

PUMPE 04C240 FAHRBAR BOMBA 04C240 SOBRE CARRETILLA 151.792.400

Ind # Désignation Description Bezeichnung Denominación Qté

- 151 792 200 Pompe murale avec filtre

et cannes Wall mounted pump with

filter and rods Wandpumpe mit Filter

und Schläuche Bomba mural con filtro y

cañas 1

- 051 221 000 Chariot (2 bras) Cart (2 arms) Fahrgestell (2 Arme) Carretilla (2 brazos) 1

- 056 100 199 Panneau de fixation Wall bracket unit Wandplatte Soporte de fijación 1

* Pièces de maintenance préconisées.

* Preceding the index number denotes a suggested spare part.

* Bezeichnete Teile sind empfohlene Ersatzteile.

* Piezas de mantenimiento preventivas.

N C : Non commercialisé.

N S : Denotes parts are not serviceable.

N S : Bezeichnete Teile gibt es nicht einzeln, sondern nur

komplett .

N S : no suministrado.

SAMES KREMLIN 4 Doc. / Dok. : 573.072.050

ACCESSOIRES - ACCESSORIES - ZUBEHÖR - ACCESORIOS

# Accessoires Accessories Zubehör Accesorios

- 149 990 020 Flacon de lubrifiant T

(125 ml) T lubricant

(125 ml / 4.4 oz) Spülmittel T (125 ml) Recipiente de TCP

(125 ml) 1

- 044 950 008 Clé (pour cuve presse-

garniture) Wrench (for wetting cup) Schlüssel (für

Spülmitteltasse) Llave (para

prensaestopa) 1

Nota : Dans le cas d'une pompe nue pour fixation murale, commander la pompe nue et le support réf. 044.910.121

(rep. 1 - Doc. 573.403.050).

Nota : For a bare pump with wall bracket, order bare pump and bracket - P.N°. 044.910.121

(ind. 1 - Doc. 573.403.050).

Anmerkung: Für eine nackte Pumpe mit Wandhalterung, bestellen Sie die nackte Pumpe und die Halterung

Bestell-Nr. 044.910.121 (ind. 1- Dok. 573.403.050).

Nota : En caso de una bomba sola con fijación mural, encargue Vd. la bomba sola y el soporte con la referencia

044.910.121 (índ. 1 - Doc. 573.403.050).

Doc. 573.031.050

Date/Datum/Fecha : 06/03/18

Annule/Cancels/

Ersetzt/Anula : 12/05/14

Modif. / Änderung :

# 044 630 400 NC

(ind. 9a / Pos. 9a)

+ # 144 630 720

(ind. 9b / Pos. 9b)

Pièces de rechange

Spare parts list

Ersatzteilliste

Piezas de repuesto

MOTEUR A AIR, modèle 500-4 AIR MOTOR, model 500-4

LUFTMOTOR, Modell 500-4 MOTOR DE AIRE, tipo 500-4

SAMES KREMLIN 2 Doc. / Dok. : 573.031.050

MOTEUR A AIR,

modèle 500-4 AIR MOTOR,

model 500-4 #

LUFTMOTOR,

Modell 500-4 MOTOR DE AIRE,

tipo 500-4 146.260.000

Ind # Désignation Description Bezeichnung Denominación Qté

2 046 260 901 Fond supérieur Upper flange Oberer Flansch Fondo superior 1

3 146 260 902 Fond inférieur Lower flange Unterer Flansch Fondo inferior 1

4 044 570 106 Bague de guidage Guide ring Führungsbuchse Anillo guía 1

5 144 579 923 Bague R 8 bis (x10) Ring, R 8 bis (x10) O-Ring R 8 bis (10Stck) Anillo R 8 bis (x10) 1

6 046 230 005 Embase bloc inverseur Base, reversing-block Grundplatte, Umsteuer-

block Base bloque inversor 1

7 109 420 257 Bague O Ring (x10) O Ring (x10) O-Ring (10Stck) Anillo O Ring (x10) 3

8 933 151 277 Vis CHc M 6 x 20 Screw, CHc M 6 x 20 Schraube CHc M 6 x 20 Tornillo CHc M 6 x 20 2

*9a NC / NS Bloc inverseur

(voir Doc. 573.087.040) Reversing block

(refer to Doc.

573.087.040)

Umsteuerblock

(siehe Dok. 573.087.040) Bloque inversor

(consultar Doc.

573.087.040)

1

*9b 144 630 720 Bloc inverseur droit avec

deux roulements (voir

Doc. 573.087.040)

Right reversing-block

with two bearings

(refer to Doc.

573.087.040)

Rechter Umsteuerblock

mit zwei Lagerbuchsen

(siehe Dok. 573.087.040)

Bloque inversor derecho

con dos rodamientos

(consultar Doc.

573.087.040)

1

10 930 151 446 Vis CHc M 8 x 35 Screw, CHc M 8 x 35 Schraube CHc M 8 x 35 Tornillo, CHc M 8 x 35 2

11 050 311 232 Ressort Spring Feder Muelle 1

12 044 570 131 Chape femelle Linkage, female Federhalterung Unión hembra 1

13 044 570 900

Fourchette de commande

équipée Control fork assembly Umsteuerstange komplett Horquilla de mando

equipada 1

14 902 202 002 Anneau truarc Retaining ring Sicherungsring Anillo truarc 1

15 046 180 003 Tige de pilotage Rod, driving Steuerstange Eje de mando 1

16 046 144 907 Ecrou Nut Mutter Tuerca 1

17 046 180 007 Tige de piston Rod, piston Luftkolbenstange Eje de pistón 1

18 046 180 010 Bague de frottement Seal, ring Abstreifring Anillo de deslizamiento 1

19 129 400 902 Joint (x10) Seal (x10) Dichtringe (10 Stck) Junta (x10) 2

20 046 144 901 Tube d'alimentation Tube,connecting Luftverbindungsrohr Tubo de alimentación 1

21 000 323 716 Contre écrou inférieur Lower locknut Untere Kontermutter Contratuerca inferior 1

22 046 180 009 Tirant Tie-rod Verbindungsstange Tirante 3

23 963 040 021 Rondelle MN 10 Washer, MN 10 Scheibe MN 10 Arandela MN 10 3

24 953 010 021 Ecrou HM 10 Nut, HM 10 Mutter HM 10 Tuerca HM 10 3

26 046 260 903 Rondelle de maintien Washer Flachdichtung Arandela 1

27 046 230 007 Silencieux Silencer Schalldämpfer Silenciador 1

29 909 420 291 Joint Seal Dichtring Junta 1

32 044 570 135 Cloche Cover Schutzhaube Campana 1

33 933 151 387 Vis CHc M 6 x 30 Screw, CHc M 6 x 30 Schraube CHc M 6 x 30 Tornillo CHc M 6 x 30 2

*40 046 260 001 Cylindre Cylinder Luftzylinder Cilindro 1

41 000 323 061 Joint de cylindre Seal, cylinder Zylinder - O-Ring Junta de cilindro 2

42 046 144 908 Ecrou de piston Nut, piston Obere Kolbenmutter Tuerca de pistón 1

La pagina sta caricando ...

Sames 04C240 Manuale utente

Sames 04C240 Manuale utente

in altre lingue

Documenti correlati

Altri documenti