Pulse Pacesetter BES Lettering 2 Manuale utente

Pacesetter

BES Lettering 2

Instruction Manual

ii Pacesetter BES Lettering 2

Instruction Manual

Copyright

This instruction manual and software are copyrighted by the

developer of the software, Pulse Microsystems Ltd. All rights

reserved. US Patent Nos. 5 270 939; 5 343 401; 5 430 658; 5

506 784; 5 510 994; 5 541 847; 5 668 730; 5 771 173; 5 809

921; 6 196 146; 6 216 618; 6 390 005; 6 968 255. European

Patent Nos. 0545773. Other patents pending.

Information in this document is subject to change without

notice.

The software described in this document is furnished under a

license agreement and/or nondisclosure agreement. The

software may be used or copied only in accordance with the

terms of those agreements. No part of this publication and the

software may be copied, photocopied, reproduced, translated,

or reduced to any electronic medium or machine-readable form

without the manufacturer’s written permission.

Commercial or industrial use of trademark and copyrighted

works (For example, books, paintings, drawings, photos,

fanciful characters, and so forth) owned by other companies or

persons, for creation of embroidery patterns without permission

is illegal and may result in either criminal or civil liability.

Microsoft®, Windows® XP, Windows® Vista, and Windows® 7

are registered trademarks of Microsoft Corporation. All other

product names are copyrighted and registered trademarks or

trademarks of their respective holders. All computer and

software names identified by TM or tm are trademarks of their

respective manufacturers.

1

Table of Contents

Learning about the Workspace...........................................5

Parts of the Workspace ................................................................... 6

Title Bar .................................................................................... 6

Pacesetter Button..................................................................... 6

Quick Access Toolbar............................................................... 7

Toolbar and Ribbon Buttons .......................................................... 13

Pacesetter Menu Tools........................................................... 13

Extra Tools.............................................................................. 14

Ribbon Tools........................................................................... 14

The View Tab.......................................................................... 18

Simulator ................................................................................ 19

Status Line.............................................................................. 20

Color Palette........................................................................... 21

Using Scrollbars ..................................................................... 21

Correcting Mistakes................................................................ 22

Setting up your Workspace Environment ...................................... 22

Changing Machine Format Properties.................................... 23

Adjusting the View of the Workspace ............................................ 24

Magnifying and Reducing the View ........................................ 24

Hiding the Sequence and Properties Panels

Automatically .......................................................................... 25

Viewing Different Parts of the Workspace

(Panning) ................................................................................ 26

Taking Measurements ............................................................ 27

Displaying the Hoop ...................................................................... 27

Viewing and Hiding the Hoop ................................................. 28

Selecting a Hoop .................................................................... 28

Creating a Custom Hoop........................................................ 29

Getting Help................................................................................... 30

Opening the Help ................................................................... 30

Using the Contents................................................................. 31

Using the Index ..................................................................... 31

Using Search.......................................................................... 31

Saving Favorite Help Topics ................................................... 32

Printing Help topics ................................................................ 33

2 Pacesetter BES Lettering 2

Instruction Manual

Creating Lettering...............................................................35

Creating Lettering .......................................................................... 36

Normal Text Tool..................................................................... 36

Path Text Tool......................................................................... 37

Custom Shapes for Text on a Path......................................... 39

Vertical Text Frame................................................................. 41

Circle Text Tool ....................................................................... 42

Creating Monograms .............................................................. 43

Text Frames - an Overview............................................................ 44

Adjusting Size of a Text Segment........................................... 44

Adjusting the Width of Text ..................................................... 45

Adjusting the Corners of Text Segments ................................ 45

Using the Envelope Handles .................................................. 46

Rotating Text........................................................................... 46

Adjusting the Slant of Text ...................................................... 47

Adjusting the Size of Text in the Circle Frame........................ 48

Adjusting Text Width in the Circle Frame................................ 48

Changing the Diameter of the Circle Frame........................... 49

Working with Individual Letters ...................................................... 50

Adjusting the Space between Letters (Kerning) ..................... 50

Moving Individual Letters........................................................ 51

Resizing Individual Letters...................................................... 51

Rotating Individual Letters...................................................... 52

Working with Color......................................................................... 53

Changing the Color of a Text Segment................................... 53

Creating Multi-color Text Segments ....................................... 53

Changing Colors in a Two-color Font ..................................... 55

Text Properties ...................................................................57

The Properties Panel..................................................................... 58

Adjusting Text Properties ............................................................... 58

Changing the Text .................................................................. 58

Changing the Font of Existing Text......................................... 60

Displaying a Font’s Available Characters ............................... 61

Spell Checker ......................................................................... 62

Changing the Height of Lettering............................................ 63

Changing Font Spacing .......................................................... 63

Width Percentage ................................................................... 64

Changing the Slant Setting..................................................... 64

Applying an Envelope............................................................. 65

3

Drop Caps .............................................................................. 66

Properties Specific to Particular Text Frames......................... 67

Changing Properties with the Context Menu

(Right-click)............................................................................. 68

Text Styles Option.......................................................................... 70

Run Style Text ........................................................................ 70

Steil Style Text ........................................................................ 71

Appliqué Style Text ................................................................. 72

Adjusting Fill Settings .................................................................... 78

Choosing a Fill Pattern ........................................................... 79

Fill Density Setting.................................................................. 80

Carved Fill Properties............................................................. 81

Underlay Properties ....................................................................... 82

Selecting the Underlay Type .................................................. 83

Specifying the Underlay Density............................................. 83

Specifying the Underlay Stitch Length.................................... 84

Changing the Inset Distance .................................................. 84

Pull Compensation Settings........................................................... 85

Displaying Special Characters....................................................... 86

Editing Designs ..................................................................91

Creating New Designs................................................................... 92

Opening and Closing Designs ....................................................... 93

Opening Files with the Browser..................................................... 94

Choosing the Default Recipe.................................................. 97

Saving a Design ............................................................................ 98

Selecting and Moving Parts of a Design........................................ 99

The Select Tool....................................................................... 99

Copying, Cutting, and Pasting Design

Components ......................................................................... 102

Aligning Items in the Design Horizontally

and Vertically ........................................................................ 103

Moving Parts of a Design Manually ...................................... 104

Nudging Design Components............................................... 105

Deleting Design Components............................................... 105

Rotating Design Components............................................... 106

Working with the Color Palette .................................................... 107

Selecting a Thread Chart ..................................................... 107

Searching for a Specific Color .............................................. 107

Changing a Thread Color ..................................................... 108

4 Pacesetter BES Lettering 2

Instruction Manual

Special Design Tools ................................................................... 109

Merging Design Files............................................................ 109

Add Designs Feature.............................................................111

Distorting Segments ............................................................. 113

Working with Name Drops ........................................................... 117

Adding Basting Stitches to Designs...................................... 120

Sequencing Outline Segments .................................................... 121

Sequencing Segments ......................................................... 121

Inserting Segments Earlier in the Segment

Sequence ............................................................................. 122

Moving a Segment Forward or Backward ............................ 123

Moving a Segment to the Start or End of

the Design ............................................................................ 124

Moving a Segment to the nearest Matching

Color Group.......................................................................... 126

Using the Color Sort tool ...................................................... 128

Printing Designs .......................................................................... 129

Previewing a Design before Printing .................................... 129

Printing Design Worksheets ................................................. 130

Changing the Print Settings.................................................. 131

Foreign Language Fonts..................................................133

Greek font.................................................................................... 134

Greek Block font .......................................................................... 135

Greek Mixed font ......................................................................... 136

Hebrew Traditional font................................................................ 137

Russian font................................................................................. 138

Glossary ...........................................................................139

Index..................................................................................145

Before you start using the software, we recommend that you

understand the Pacesetter BES Lettering 2 design workspace

and learn a few of the basic components outlined in this section.

Topics covered in this chapter:

• Setting up the design workspace environment.

• Showing a hoop in the workspace, and choosing the size of

hoop to be displayed

• Creating your own customized hoop.

• Using the Pacesetter BES Lettering 2 help.

CHAPTER 1:

Learning about the

Workspace

6 Pacesetter BES Lettering 2

Instruction Manual

Parts of the Workspace

The Pacesetter BES Lettering 2 workspace contains a number

of different areas which have distinct functions. The sections

that follow give an overview of what each of these areas does,

and the kinds of information about the design that they contain.

Title Bar

The Title Bar appears at the top of the Pacesetter BES Lettering

2 design window. The Title bar displays information about the

design that is open in the workspace: its name, the number of

stitches and colors in the design, and the overall width and

height.

Pacesetter Button

At the top left-hand corner of the window is the Pacesetter

Button . Clicking on the Pacesetter Button to gives you

access to a menu of useful tools, such as New, Save, Print, and

Learning about the Workspace 7

several others. For a complete list of the tools available on this

menu, and a summary of their functions, see “Pacesetter Menu

Tools” in the next section.

When you open the Pacesetter Menu, you will also see

displayed a list of recent files that you have been using. Just

double-click on the file name to open it.

Tools available on the Pacesetter Menu.

Quick Access Toolbar

The Quick Access Toolbar is located right along the top of your

workspace, to the left of the Title Bar. This toolbar contains tool

buttons that you will commonly use, such as Open, Save, and

Print; but it is fully customizable, meaning that you can add the

tools you personally use most often, for easy access. See

“Customizing the Quick Access toolbar”.

8 Pacesetter BES Lettering 2

Instruction Manual

To start out, the following default tools are included on the Quick

Access toolbar: New, New/Recipe, Open, Merge, Save, Print

Preview, Direct Print, Undo, and Redo.

Customizing the Quick Access Toolbar

One important advantage of the Quick Access toolbar is that it

is fully customizable. This means that you are able to select

tools from any of the Pacesetter BES Lettering 2 toolbars and

add them to the Quick Access toolbar. You do this by way of the

Customize function, which is accessed by clicking the small

down arrow to the right of the Quick Access toolbar.

To customize the Quick Access toolbar:

1 Click the down arrow at the right end of the Quick Access

toolbar.

You see a menu.

2 Click on More Commands...

You see the Customize dialog.

Learning about the Workspace 9

3 From the “Choose Commands from:” list, select the toolbar

containing the command you want.

The list of tools on that toolbar now appears in the

“Commands” box.

4 Select the desired tool from within the “Commands” box, and

click Add>>.

The selected tool appears in the list of Quick Access toolbar

tools.

5 Repeat steps 3-4 until you have added all the tools you want

to the Quick Access toolbar.

6 If there is a tool on the Quick Access toolbar that you do not

want to have on there, select it in the right-hand box and

click on the Remove button in the dialog.

7 When you have added and/or removed all the buttons you

want, click OK.

The dialog will close; the Quick Access toolbar will be

changed accordingly.

10 Pacesetter BES Lettering 2

Instruction Manual

Adding Separators in the Quick Access

Toolbar

You have the option of also adding separators in the Quick

Access Toolbar. These are small vertical marks which appear

on the Quick Access Toolbar, and divide the commands into

groups for ease of use. A separator is added just the same way

as you add commands; select <separator> in the “Choose

commands” list and then click the Add >> button.

Here is an example of how the separators work. If you create an

arrangement of separators and commands in the Customize

dialog that looks like this,

The Quick access toolbar will be organized to look like this:

For more details, see the procedure outlined above,

“Customizing the Quick Access Toolbar.

You can change the position of a separator, or any command in

the Quick Access Toolbar. Select it in the box to the right in the

Customize dialog, and click the up and down arrows on the

right. This will move the command or separator relative to the

other commands in the Quick Access Toolbar.

Learning about the Workspace 11

Customizing Keyboard Shortcuts

Another useful feature of the More Commands menu item (on

the Quick Access Toolbar) is that it gives you the option of

assigning your own custom keyboard shortcuts. Keyboard

shortcuts can be very useful for those tools that you use most

often.

To assign keyboard shortcuts:

1 Click the down arrow at the right end of the Quick Access

toolbar.

You see a menu.

2 Click on More Commands...

You see the Customize dialog.

3 Click the Customize button.

You see the Customize Keyboard dialog.

12 Pacesetter BES Lettering 2

Instruction Manual

4 From the “Categories” list, select the category containing the

command you want.

The corresponding list of commands appears in the

“Commands” box.

5 Select a command to which you would like to assign a

shortcut.

6 Click in the “Press new shortcut key” field.

7 On your keyboard, press the sequence of keys that you want

to use; these keystrokes will appear in the field.

8 Click the Assign button to create the custom shortcut.

The shortcut sequence will be moved into the Current Keys

field.

9 Repeat steps 3 - 7 until you have created all the desired

keyboard shortcuts.

10 Click close.

If there are two or more keys used in the shortcut, a plus sign

(+) will be inserted between them, to indicate that they are to

be used in combination. The (+) on your keyboard is not part of

the shortcut sequence.

Learning about the Workspace 13

Toolbar and Ribbon Buttons

You can access the tools available in Pacesetter BES

Lettering 2 through the Pacesetter Button and the various

toolbars. The tables below show the buttons, grouped by

location (i.e. whether they are on the Quick Access Bar, or on

one of the tabs on the ribbon). A brief description of what the

button does is also included. Note that within each tab, some

buttons are grouped together by function.

Pacesetter Menu Tools

Tool What it means

New: Creates a new untitled design.

New/Recipe: Opens a new page and allows you to choose a

new recipe and machine format.

Open: Opens an existing design file.

Merge: Opens the Merge Design dialog, which you can use to

import existing stitch or outline files into the current design

Browser: Opens a the Browser window, a dialog box which

allows you to search all your computer’s disks and directories

for design files.

Save: Saves the current design.

Save As: Opens the Save As dialog, allowing you to choose

the destination and file type to save it as.

Print: Opens the printer dialog on your computer, allowing you

to choose your printer and adjust the printer’s properties.

Direct Print: Prints a copy of the design worksheet, bypassing

the printer dialog.

14 Pacesetter BES Lettering 2

Instruction Manual

Extra Tools

Ribbon Tools

The Ribbon appears below the Title Bar. The Ribbon has three

tabs, the Home tab, the Arrange tab, and the View tab. Clicking

on the tabs displays all the buttons for the functions that are

under that tab.

Tools on the Home Tab

Print Preview: Opens the print preview window, which in turn

will let you print the current design.

Print Setup: Opens the print preview window, which in turn

will let you print the current design.

Close: Closes the file that you are currently working on (the

active file) leaving any other files open.

Close All: Closes all files that are open on your computer.

Exit: Closes all open files and shuts down Pacesetter BES

Lettering 2; you will be prompted to save any open files.

Tool What it means

Undo: Reverses your last action.

Redo: Reverses the action of the Undo command.

Tool What it means

Select: Selects objects in the design window.

Select All: Accessed via the drop-down menu from the

Select tool.Selects all items in the design workspace.

Tool What it means

Learning about the Workspace 15

Cut : Cuts the selection and copies it to the clipboard.

Copy: Copies the selection to the clipboard.

Paste: Pastes the clipboard contents into the design, at

the end of the design sequence.

Insert: Pastes a copy of the clipboard selection into the

sewing sequence immediately following the selected

segment.

Delete: Removes the selected segment.

Text: Creates lettering placed along a straight baseline.

Text on Path: Creates text segment along a path. The

path may be chosen from a pre-defined list of shapes, or

you may create your own shape.

Vertical Frame: Creates vertical lettering.

Circle Frame: Creates lettering based on a circular

baseline.

Monogram Frame: Creates three-letter monogram text.

Name Drops: Quickly create a number of distinct

designs, based on a single design, but each with

different text string included.

Add Designs: Adds decorative features to your design -

accents, appliqués, borders, and frames.

Auto Baste: Automatically adds an outline of basting

stitches around the current design.

Color Sort: Automatically reduces the number of thread

changes that are required in a design, by re-arranging

the sewing sequence so that like colors are together.

Tool What it means

16 Pacesetter BES Lettering 2

Instruction Manual

3D: Realistically renders your design onscreen.

Grid: Displays a background grid, which helps with

alignment. This grid can be used for the alignment of

items on the display.

Hoop: Displays the hoop as it fits relative to the

embroidery. Clicking this button a second time will turn

the view of the hoop off.

Select Hoop: Accessed via the drop-down menu from

the Hoop tool. Opens up the Select Hoop window, in

which you can choose a new hoop.

/fit Hoop: Accessed via the drop-down menu from the

Hoop tool. Scales the design up to the maximum size of

the selected hoop on the design window.

Background: Two options are available from this button,

Select Color or Select Fabric. Depending on which one

you choose, a dialog box will open in which you select

either the color, or the fabric pattern, that appears in the

background of the active design window.

Ruler: Measures the distance between any two points in

a design.

Zoom: Magnifies the design to fit a rectangle drawn by

the user with the mouse pointer.

Zoom in: Magnifies the view of the design by a fixed

amount.

Zoom out: Shrinks the view of the design by a fixed

amount.

Fit to Window: Displays the entire design and loaded

images in the window.

Back to 1:1: Returns design to original size.

Slider: Drag the slider to choose a specific level of

magnification; displays percentage of original size.

Pan: Allows you to move the design around in the

workspace window by clicking and dragging.

Tool What it means

Learning about the Workspace 17

Tools on the Arrange Tab

Tool What it means

Select: Selects objects in the design window.

Select All: Accessed via the drop-down menu from the Select

tool. Selects all items in the design workspace.

Distort: Displays the Distortion dialog, which you can use to

add interesting effects to the selected design.

Align Left: Aligns all selected objects with the left-most item

selected.

Align Right: Aligns all selected objects with the right-most

item selected.

Align Top: Aligns all selected objects with the top-most item

selected.

Align Bottom: Aligns all selected objects with the bottom-

most item selected.

Horizontal Center: Takes all selected objects and centers

them in the selection box. The objects are moved so that they

are centered left-to-right with each other, but they are not

moved up or down.

Vertical Center: Takes all selected objects and centers them

in the selection box. The objects are moved so that they are

centered top-to-bottom with each other, but they are not

moved left or right.

Center: Centers one or more selected objects proportionally

within the current hoop. If more than one object is selected,

the entire group is moved together to the center of the hoop;

the objects selected remain in the same position relative to

each other as they had before being centered.

Flip Horizontal: Flips one or more selected objects

horizontally.

Flip Vertical: Flips one or more selected objects vertically.

Rotate Left: Rotates one or more selected objects to the left

by 90 degree increments.

Rotate Right: Rotates one or more selected objects to the

right by 90 degree increments.

18 Pacesetter BES Lettering 2

Instruction Manual

The View Tab

The controls on the View tab allow you to change what appears

on your workspace; which panels are displayed, whether or not

commands and stitch points are shown in the design, and so on.

The areas found on this tab are Windows, Show/Hide, and

Program Preferences.

Windows

In the windows area, check the box to show the corresponding

window or panel, and uncheck it to hide that window or panel.

• Sequence. Shows/hides the Sequence view.

• Palette. Shows/hides the thread palette.

• Properties. Shows/hides the properties panel.

• Simulator. Shows/hides the sewing simulator.

• Status. Shows/hides the status bar.

Show/Hide

Check the boxes to show the corresponding symbols in the

Design Workspace.

• Entry/Exit. Shows the position of the first and last points

in the sewing of a segment.

• Commands. Displays icons in the workspace that show

where the color changes and trims are.

• Stitch points. Shows the penetration points of the

stitches.

Program Preferences

Click on the Program Preferences button to open a dialog

in which you can set the default machine settings, change the

units of measure, and choose settings for the workspace grid.

For more information on this dialog, see “Setting up your

Workspace Environment”

La pagina sta caricando ...

Pulse Pacesetter BES Lettering 2 Manuale utente

Questo manuale è adatto anche per

Pulse Pacesetter BES Lettering 2 Manuale utente

in altre lingue

Altri documenti