DigiWeigh DW-PRT24T Guida utente

Tipo
Guida utente
What You Should Know Before Starting Work
DIGIWIEGH Label Editor is a program for designing and printing labels, developed to
work with label printers DIGIWEIGH DW-PRT24T. It shows you onscreen just how the
label will look when printed, and allows you to make the necessary corrections before
printing or loading the label design in the printer. The exact correspondence guarantees
that every dot you can see on the screen will be printed at precisely the same area of the
label, as long as the label has the required size.
In order to use all the options of the printer, the program’s organization was developed so
as to follow the printer’s mode of operation. That is why the image editor looks
somewhat different from Paint or Photoshop for example.
Each label is made up of several, different graphic elements, known as objects. Each
object is independent and can be moved, edited or deleted on its own. Objects can be
created from the Draw menu item. Right-click on an object to bring up a properties dialog
box where you can change the location and appearance of the selected object. Left-click
to select, move or resize an object, if possible. The way you can move and resize an
object is not the same for all elements and is explained in the objects’ description.
Deleting an object is done by selecting an object and pressing the <Del> key on your
keyboard. Selection of multiple objects can be done by clicking on each of them with the
<Shift > key held down, or by group selection where you must zone at least one of the
corners of the selected object. Moving several objects is done by selecting them and
moving one of them they will all move together.
Basic Concepts Used
· Form
A form is a label design loaded in the printer. It is a text file containing commands for the
printer. The name of the form in the printer is limited to 8 symbols, only Latin letters and
digits are allowed. CAPS make no difference “Label1” and “
LABEL1” will be recognized as one and the same form. The form DOES NOT contain
the graphics and loadable fonts it uses. Therefore, if you manually delete a graphic from
the printer, the form that uses it will not be able to find it and the respective area on the
printed label will be empty (but no error or program /printer block will occur).
If you save the label design with “Save as Form” you will save on the disk exactly this
text file, which may not be enough for reproducing the label, since it does not carry the
graphics and fonts. This save option is left for compatibility with older label printer
versions, which support only this format. That is why, if this is not the case, save your
label designs with the “Save as Label” option.
There could be many forms with different names in the printer. However, only one of
them could be active at a particular moment, and only this active form will be issued at a
print command.
· Variables and Counters
The variables and counter are simply a location in the program or the printer allocated for
a text, which can be entered later, just before a print run. The counters also have the
quality to increase with a fixed step (increment) after a print command. You can use
variables and counters for those parts of a label, which will change often (e.g.: items’
names, prices, weight). This mode of work is obligatory, if you design a label for use
with a digital scale, because variables are the only way for the scales to send the weight
data to the printer. Variables are set in advance from Print->Define Variables or the
corresponding button, and their value can be changed later, usually before print from
Print->Update Variables, or by means of the button in the print dialog box itself.
The variables and counters have the following properties:
· Maximum length
· Prompt a reminder text, useful for reference when working with variables and
counters later.
· Alignment if their length is under the maximum, and in that case also- fill
characters.
· Increment step only for counters.
· Label
A label (label design) is the inner format of DIGIWEIGH Label Editor. It contains the
commands for the printer and all the additional information needed for printing the label
(graphics and fonts). This is not a text file and you cannot open it with a text editor,
unlike the form. Saving a label on the disk records all the information, including the
current contents of the variables and counters. When you open it later, you can proceed
with your design whence you left it.
When you save a label in the printer, the program automatically generates commands for
the respective form and sends them to the printer, and also saves all the graphics and
fonts the labels design uses.
· Graphics
A graphic is an object in the printer, which saves information about the graphic image
(picture). A graphic has a name by which any form can send for it. The requirements for
the graphic’s name are the same as those for the form.
· Font
A font is an object in the printer that saves information about a loadable font. The name
of the font is of one Latin letter, CAPS make no difference. The font is identified by this
name when send for from a print text command. If there is no font with such a name, the
print text command will not be executed. The loadable fonts may contain from 1 to 224
characters, which may be not successive.
· Printer’s memory
The forms, graphics and loadable fonts share the memory of the printer. They are
recorded there as are the files on the disk: they have names you can delete and export
them from the printer, as well as receive the list of the already loaded objects. The sum of
forms, graphics mad fonts must not exceed 500 KB, though this limit will be higher with
future versions of the printer. The number of objects that the printer can record is 512. If
you reach the number limit or have a full memory, you must delete some of the objects in
order to proceed, or work in Test print mode.
· Print and Test Print
The standard method of working with the printer is to load a label design in the device,
make it active and pint the label (possibly with new values set for the variables). All the
information needed is already in the printer, except the variables, and what follows is a
print command. This is the only way of operating with digital scales.
0 Another method Is possible: If currently there is no active form, the printer will
automatically carry out any commands, and in case of a print command it will print on
the label the result of the received commands. This is used in test printing, which is a
print-out of the onscreen label, without loading it in the printer. This may be useful in
several cases:
· To print out a paper - preview of the current label design before loading it in the
printer.
· The label design contains a small piece of information that you will not need later.
· There is no free memory in the printer and you cannot or want not to choose what
to delete.
· You work with a large number of different labels, which you change often. It is
more convenient to keep them on the disk and load them only in case you need them
the memory limit will not be a problem.
The main difference between the two methods is that during the test printing what is
transferred through the serial port is all the data contained in the label design; while
during the standard method what is transferred is the new values of the variables. If the
label design has a large picture (graphic), or uses loadable fonts and you work at a lower
communication speed, the transfer may take quite a while. A combined approach is
possible if we know that the graphic we are using is loaded in the printer, we can order
the program to get the data directly from there, without sending it every time afresh. To
do this, go to Tools->Settings, or click the Settings button. The “Test print” field offers
two choices:
· “ Send fonts and graphics directly” – the program sends all the necessary
information to the printer repeatedly. The print will be correct, but eventually slower.
· “ Use stored fonts and graphics” – the printer will search for the graphics and
fonts in its memory. The sending of data will be fast, but if the graphics and fonts are not
in the memory, their respective place on the label will be empty.
What You Should Be Careful About
· When you enter text and barcode data bear in mind that you must follow the rules
stated in Text and barcode information format. If there is a mistake, the text will be
substituted with “@@@@”, and the barcode will appear on the screen with a red
strikethrough. This means that the printer will not receive the data and the object will not
be printed. You must find and correct the mistake. Note that most of the barcodes have
requirements number of symbols allowed and information length. If they are not met,
the barcode on the screen will be crossed out and will not be printed.
· When you print a batch of labels, the printing head may get overheated and the
printer will stop to cool out. It is advisable you don’t print more than some hundreds of
labels with one print command.
· The program does not keep track of changes in the label design. So before
opening a new label, loading a label from the disk, or exiting the program, be sure to save
the label design on the disk, or the printer. Otherwise it will be lost.
· The printer’s memory is power-independent (flash) and keeps all the saved data
after the device is switched off, unless you delete it or format the memory. Even though
the memory could be overwritten ten thousands times, but still a limited number of times,
it is not advisable that you perform actions that write or delete information in the memory
needlessly. When you design a new label, use the test print to make sure everything is
OK, and load the label in the printer only when the label design is ready. You can make
temporary saves on the disk of course.
· When you load a label design in the printer, the device also automatically saves
all the graphics and fonts, that were used, with names as those you set in the program. If
the memory of the printer contains graphics or fonts with such names, the new
information will overwrite them without warning. This could be a problem when some
other form uses a graphic/font with this name. Make sure the names of the graphics and
fonts do not match.
Object Types
· Text
The text object displays information with a set font and orientation. There are 5 in-built
fonts supported, with sizes: 8x12, 10x16, 12x20, 14x24 and 32x48 pxls. Font 5 (32x48)
contains only CAPS. You can use external fonts, which you must load in the program
beforehand from Tools->Add New Font. The text properties allow you to select: the
coordinates of the top left corner of the text object; font; font style (normal, bold, italic,
inverse); horizontal or vertical size-increase; rotation (0, 90, 180, 270 degrees);
information to be printed. The loadable fonts have only the normal print mode property.
See Text information format. To move a text object left - click on the text and drag with
the mouse key held down. Text objects cannot be resized the size depends on the font
and the font size.
· Barcode
The barcode object is a type of barcode. The program supports the most widely used
barcodes. The barcode properties allow you to select: coordinates of the barcode top left
corner; barcode type, narrow and wide bar thickness; height, rotation (0, 90, 180, and 270
degrees), show and justify barcode text. Some types of barcodes do not support wide bar
thickness. The Text information format is identical to that for the Text object. To move
the barcode object, left-click on it and drag with the key held down. Changing the size is
possible only by changing the height and clicking with the left mouse button on the lower
part of the barcode the object will appear surrounded by a frame.
· Rectangle
Draws a rectangle area on the label design, which can be black, white or inverse. The
white and inverse option allow you to change the appearance of objects that were drawn
earlier and will be covered by the rectangle. For example, you can write some text and
make the letter white on a black background, by placing a rectangle over the text, with a
suitable size and inverse colour. The white colour deletes everything that comes under the
rectangle you can delete unwanted parts of other objects in that way. The rectangle
properties allow you to select: the coordinates of the top left corner of the rectangle;
rectangle’s width, height, and colour. To move the rectangle, left-click on the object and
drag the mouse with the mouse held down. To change the size, left click the object near
the corners the frame will appear as a thick red frame.
· Diagonal Line
Draws a line with a set thickness, which can be black, white or inverse. The use of the
white and inverse color option is the same as with the rectangle. You have the choice to
select: the coordinates of the two end points, thickness and color. Moving is done by left-
clicking the line and dragging it with the mouse to a new location on the label design
area. To change size and slant, left click the object at the end a thickened red frame will
appear.
· Box
Draws a rectangle box with a set thickness and black colour. You can set the coordinates
of the top left corner and box line thickness. Line thickening is done at the expense of the
internal space. To move the box object, select the item by clicking on some of the lines,
hold down the left mouse button and drag the object. Resize by selecting the object so as
the frame to appear indicating the stretch directions.
· Picture
Displays a black-and-white image on a selected area on the label design. The program
takes the picture data from a file, which must be monochrome, BMP/PCX format. What
is loaded is the whole image you cannot select parts of it. You can define the
coordinates of the top left corner, the file path and name. The picture will be loaded in the
printer as a graphic with the same name. This is useful when you want this picture to be
used by different label designs, no matter that the graphic was loaded only once (for
example you can load a graphic with your company logo). Move a picture by left-
clicking on it and dragging it to another area. Pictures cannot be resized. If you want to
use a colour image of BMP/JPG format, you must first convert the image from Tools-
>Color To Black & White Converter and save the file on the disk.
· 2-D barcode PDF417
Draws a barcode PDF417. The barcode properties allow you to select the position,
rotation (0, 90, 180, and 270 degrees), maximum width and height, maximum bar width
and height, maximum row and column count, the compression method and the barcode
data. The Text information format is described in a separate topic. To move the barcode
object, left-click on it and drag with the key held down. To change the size select the
right lower corner of the barcode (it’s position depends on the rotation) - the object will
appear surrounded by a frame.
Text and Barcode Information Format
The text and barcode information could be comprised of several fields that contain free
text, the current date and time and some of the set and initiated variables and counters.
The elements are arranged from left to right according to their description and form the
text that will be printed or encoded in the barcode. The fields are:
· Free text
The free text is entered directly, only it must be enclosed by quotation marks. If the text
itself must contain a quotation mark, its quotation mark must be preceded by a ‘\’. For 2D
barcode PDF417 only control symbols (ASCII codes bellow 32) can be encoded using
the syntax ‘\dd’, where dd is the decimal representation of the ASCII code.
· Current Date
The code is TD[m]. m is an optional integer from 3500 to 3500, and sets a difference
from the current date in days you can use this to set an expiry date. Date could be
formatted in several ways from File->Label Setup or by pressing the corresponding
button.
· Current Time
The time code is TT. Time format can be set from File->Label Setup.
· Variable
Format Vn[Modifiers].
n is the number of the variable and can have a value from 0 to 31.
The modifiers are indicators for separating symbols from the variable. Their number is
arbitrary. If there are no modifiers, the variable is added as it is by default and
initialization, without additional processing. In most cases, modifiers are not necessary.
The printer works with the following modifiers:
> Cuts off the leading symbols of the string that are identical with the symbol that
follows the modifier’s sign. It can be used to remove leading zeroes or spaces.
< Cuts off the end symbols of the string that are identical with the symbol that
follows the modifier’s sign.
Rn Leaves the right n symbols in the string.
Ln Leaves the last n symbols in the string.
Mm.n Gets n symbols from the string, starting at m position.
# Removes the leading zeroes, if the string could be interpreted as an integer.
Xmn Substitutes all symbols with value m with the n symbol.
G After this symbol other modifiers must follow. They will act as global modifiers
the whole text until the current position will be changed, not the last variable or counter.
· Counter
Format Cn [Modifiers]
n is the number of the counter and can have a value from 0 to 7.
The modifiers are as those for the variables.
The program and printer process the text and barcode data in the following order:
· They get the subsequent element.
· If the element is a variable or a counter, they get the current value. The text is
formatted depending on its definition. All the modifiers are executed from left to right.
· If the element is date or time, it is formatted as was set in Label Setup.
· The resulting text is then added at the end of the text that was a result from the
preceding elements.
· The procedure continues till data finishes.
Examples:
“Date:”TD” Time: “TT
will generate Date: 12.JAN.2003 Time: 16:30
“Expiry Date: “TD+90
will generate the text Expiry Date: 16.04.2003
if the current date is 16.01.2003.
“Price:”V2
will generate Price: 1.20
if the value of the variable V2 is “1.20” at the moment.
V0> < C1L3
will generate a string with a variable V0 with leading and end spaces removed and a
counter C1 with the three left symbols removed.
V0L1V0M3.2V0R1
will generate a string that includes the first, third, forth and last symbol of the variable
V0.
Creating a New Label Design Basic Steps
· Determine the size of the paper label - so that you will know the dimensions of
the working area.
· Clear the screen of the Label Editor from any previous label designs with File-
>New Label.
· Set a label size for the label design from Label Setup. If the label will contain date
and time, set the date and time format.
· Decide which part of the label information is to change often it is a good idea to
provide a variable for it. For example: - item’s name, weight, price. Set the necessary
variables from Define variables and counters. When defining variables, try to estimate
what length and justification would be best for the label outlook. Do not worry if you
cannot decide immediately these settings can be changed later. Set suitable and sensible
names for the variables this will greatly facilitate your work.
· Start adding the necessary elements on the label, one at a time: press the draw
button for the object and click on the label area where you want the object to appear. Of
the object is a rectangle, frame or diagonal line, you can roughly set the initial size hold
down the left-mouse button and drag to resize. The object’s current position and size will
be indicated by a thick red line or frame.
· When you let go the mouse button, the object’s dialog box will appear where you
can edit its parameters. When drawing text and barcodes, make sure you enter some data,
otherwise the objects will not be visible. You can edit the entered information later.
Choose font and enlargement, if necessary.
· Arrange the objects on the label, so as to cover the area regularly. Do not forger to
leave some empty space around barcode objects to ensure proper reading.
· Set the values for the variables used with Update variables and counters. In case
you have done that earlier, go around the text and barcode objects and check whether the
entered date is valid and the correct variables are stated. The label design should be
already finished make a test print to preview it on the paper.
· Save the new label on the disk with File->Save as Label. You can then save the
label design in the printer with File->Store Current Label. The new label will be
accessible for print with the Print button.
Description of the menu items
· File
Load and save files, get data from the printer, store data in the printer and label setup.
· Edit
Edit commands.
· View
Settings for the DIGIWEIGH Label Editor’s screen.
· Print
Print and test print; variables and counters.
· Draw
Insert a new object on the label design.
· Tools
Additional procedures fonts, color image conversion, terminal.
· Help
Toolbar Buttons
Draw Text
Opens a dialog for adding a text object.
Also available from the Draw menu item.
Draw Barcode
Opens a dialog for adding a barcode object.
Also available from the Draw menu item.
Draw Rectangle
Opens a dialog for adding a rectangle object.
Also available from the Draw menu item.
Diagonal Line
Opens a dialog for adding a diagonal line object.
Also available from the Draw menu item.
Draw Box
Opens a dialog for adding a box object.
Also available from the Draw menu item.
Draw Picture
Opens a dialog for adding a picture object.
Also available from the Draw menu item.
Grid Size and Adjustment
Opens a dialog box for adjustment.
Also available from the Edit menu item.
Files and Forms
Opens a dialog window where you can handle the files on the disk and forms, graphics
and fonts in the printer.
Also available from the File menu item.
Label Setup
Opens a dialog window where you can set the basic label parameters and print: size,
offset, print darkness and speed, date and time format, etc.
Also available from the File menu item.
Test Print
Opens a dialog for test print,
Also available from the Print menu item.
Print
Opens a dialog for print,
Also available from the Print menu item.
Define Variables and Counters
Opens a window where you can set variables and counters.
Also available from the Print menu item.
Update Variables and Counters
Opens a window where you can set new values for variables and counters.
Also available from the Print menu item.
Settings and Diagnostic
Opens a dialog window, where you can set the serial port and the clock, and print a
diagnostic information from the printer.
Also available from the Tools menu item.
Shortcut Key Combinations
Ctrl-A Selects all the objects on the label design.
Ctrl-B Places the selected object at first position in the object list.
Ctrl-C Highlights the selected objects and marks them for copying. Except this the whole
label is stored in the clipboard.
Ctrl-J Opens the dialog for adjustment.
Ctrl-M Opens a list of all objects on the label.
Ctrl-R Rotates the label 90 degrees clockwise.
Ctrl-T Places the selected object at end position in the object list..
Ctrl-U Unselects all selected objects.
Ctrl-V Pastes a copy of all objects highlighted with Ctrl-C.
Del Deletes all selected objects, after confirmation.
F1 Opens the Help application.
F2 Opens the test print dialog.
F3 Opens the print dialog.
F4 Allows you to set new values for variables and counters.
Dialog boxes for creating and editing objects
· Draw Text
Create or edit a text object
· Draw Barcode
Create or edit a barcode object
· Draw Rectangle
Create or edit a rectangle object
· Draw Diagonal Line
Create or edit a diagonal line object
· Draw Box
Create or edit a box object
· Draw Picture
Insert or edit a graphic object
· Draw Barcode PDF417
Create or edit a 2-D barcode PDF417
Dialog boxes for program setup and printer settings
· Label Setup
Label setup and some print parameters.
· Settings and Diagnostic
Options for setting the serial port and clock, and print of diagnostic information.
· Align to Grid
Set grid step (the regular space between the points of the pattern) and adjust size (objects
will move in measured steps on the grid).
· Objects List
Opens a list of all the objects on the label where you can edit, rearrange or delete them.
Color to Black & White Converter
From this dialog you can convert color images of BMP or JPG format into a black-and-
white images to be used on the labels. You can clip off unwanted parts of the image,
resize it, as well as make brightness and contrast adjustments. The top are of the window
is the toolbar, and below is an area where the target and converted image are tiled
vertically. Smaller graphics are automatically converted, whereas to convert a larger
graphic, after adjusting the settings, you have to click the Convert button.
If you need only a part of the converted image, you can frame it by holding down the left-
mouse button. The framed area can then be clipped of with Cut.
· Load
Selects a graphic file for conversion.
· Convert
Starts conversion. Smaller graphics are automatically converted.
· Save
Saves the converted black-and-white graphic on the disk.
· Reset
Cancels the color corrections and resize changes of the black-and white image.
· Test
Sends the black-and-white image from the right pane of the screen to the printer to be
tested.
· Cut
Clips off a framed are from the image in the left pane. The cut part becomes the new
target image.
· Width
Changes the width of the graphic. If Constrain Proportions is checked, Height is also
automatically updated.
· Height
Changes the height of the graphic. If Constrain Proportions is checked, Width is also
automatically updated.
· Rotation
Rotates the graphic at 90, 180 and 270 degrees.
· Constrain Proportions
Determines whether the width/height ratio must be preserved. If checked, changes in the
width will automatically update the height value, and vice-versa.
· 50% Threshold
Check to use a simple conversion procedure. This is a simple check per dot for 50 %
brightness if higher, the dot becomes white, if lower black. In some cases this
procedure is a more suitable conversion method.
· Brightness
Changes the brightness of the black-and-white image.
· Contrast
Changes the contrast of the black-and-white image.
· Color Settings
The Red, Green and Blue color channels allow you to modify the color image in a way
that will affect the black-and-white image.
True Type to Label Printer Font Converter
From this window you can create a matrix font for the label, on the base of some of the
installed TrueType fonts.
The loadable fonts for the DW-PRT24T printers can consist of an arbitrary number of
symbols that may not be successive. Since the printer’s memory is limited, it is preferable
if the font contains only the symbols you will need. Working with loadable fonts is the
same as with the in-built fonts they can be rotated and multiplied by an integer along
the X and Y coordinate independently. The only difference is that they cannot be printed
in Bold or Inverse style. They are also proportional i.e. each symbol has a different
width (for example ‘w’ is wider that ‘i’) and it is difficult to assume what the width of the
whole text will be.
· Font
Use the drop-down menu to select a font to use.
· Style
Sets an attribute Regular, Bold, Italic, Bold Italic.
· Script
Select the character set for a country.
· Top Pane
This is the pane where you can select the symbols to be copied. Select a symbol, then in
the bottom pane position the mouse pointer at a cell where you want that symbol to be
placed and click Copy. To copy a symbol at exactly the same place in the bottom table,
double-click on it.
· Bottom Pane
This is the pane where you copy the symbols. The symbols listed in this pane will be
included in the font.
· Clear
Clears all the symbols listed in the bottom pane.
· Clear Marked
Clears a selected/highlighted symbol from the bottom pane.
· Copy
Copies the selected symbol from the top pane in the bottom pane the start position is
the position of the mouse pointer.
· Undo
Cancels a copy or delete operation.
· Preview
Opens a dialog box, where you can access some additional font setting. The options are:
· Width correction
Narrow or widen the symbols in horizontal direction up to 2 times.
· Size
Select the font height.
· Space
Sets a symbols interval. The label printers automatically add a white frame of 1 pixel
around a symbol and the printed text appears wider. To avoid this, for Space. select a
value 2. Allowed values are 16~16. Large negative values will result in overlapping
symbols. The Space value makes no difference to the size of the generated file.
· Remove Blank Lines
If you have not selected the whole font, probably it is possible to remove some top and
bottom lines without covering the symbols. This will decrease the amount of memory the
font will occupy. You can either set values for Top and Bottom or check Auto. The blank
lines will be colored in blue for easy observation.
· Save
Enter a file name as save the file. To load the new font in the label go to Tools->Add
New Font .
Character Set Viewer
You can see here the languages and the ASCII codes of the symbols for each of them,
supported by the Label Editor and the printers.
Drop list “Language” selects the character table and “Font” selects the font. If the current
label contains loadable fonts, they are in the list, too. When the mouse cursor moves over
a symbol, the ASCII code of the symbol is displayed on the right upper part of the
window in decimal and hexadecimal mode.
You can copy the character table using Ctrl-C to the Clipboard as graphics for use in
other programs. The same thing can be done clicking the right mouse button a popup
menu appears.
Frequently Asked Questions
Question: There is no connection with the printer. What may be the problem?
Answer: Possible Reasons:
· Check if the printer is switched on and properly connected to the computer.
· Check whether you have selected the correct serial port.
· Check if the selected baud rate and protocol for the serial port match the position
of the switches in the printer.
· Make sure the operation mode set by the switches is NOT DW-PRT24T
Compatibility the printer does not work with the program, when in this mode.
· Check if there is another application that uses the serial port.
· If when switching on the printer you have printed a diagnostic info with the LF
button, switch off /on the printer.
· Switch off /on the printer and try again. The printer may be trying to receive some
kind of data.
Question: How can I check what is the baud rate of the serial port?
Answer: When you switch on the printer, press down the LF button. The printer
will issue a diagnostic information printer’s version, language, baud rate, switches’
positions, printing head temperature, free memory space and current settings. Then you
MUST turn off/on the printer, because it is in Dump mode and does not run commands.
Question: What kind of labels and paper-rolls can I use with DW-PRT24T
Answer: DW-PRT24T label and paper roll width: 56 mm. Use the switch to select
paper/label mode. The length of the labels can be different, the maximum value is 170
mm. The label roll MUST NOT be with a black line.
Question: Can I use DIGIWEIGH Label Editor with other printers, except DW-PRT24T?
Answer: No, or at least to an limited extent. You can load a form that will be compatible
with the most commonly used label printers (those of them that use EPL2 as a program
language) if you: do not use modifiers in text and barcode data; do not use barcode text
justification; do not use white and inverse color for diagonal lines. You can even create a
font for such type of printer. But a reliable communication and print from the program
are possible only using the DIGIWEIGH printers.
Question: The graphic I use in the label is displayed onscreen, but does not print out.
Why?
Answer: If you use the test print command, go to Settings and Diagnostic and check
the status Test print. If the field selection is Use stored graphics and fonts and the graphic
is not loaded in the printer, it will not be printed out. The same problem may occur with
loadable fonts.
Question: The printer often fails to print some objects from the label, and the
program displays communication error?
Answer: The serial port is probably loaded almost to its limits. If the connecting
cable of the printer is longer that 2 meters, and especially if you are using two connected
cables, you may be experiencing some problem with the 115200 baud rate and must
change the speed.
If this is not the case, check if the program uses a hardware protocol, and the printer a
Xon/Xoff one. With a larger data transfer this could be a reason for the problem.
There may be some hardware problem with the computer or printer’s serial port.
Question: The print is too thin. Why?
Answer: Maybe you set low darkness print from . The label paper may be of poor
quality, or too old this makes the paper less sensitive.
Keep in mind that thermal print manages poorly the thin lines (of 1 pixel width),
especially horizontal lines so avoid using them.
Question: The printer cannot recognize the beginning of the label properly. Why?
Answer: You have probably set a continuous paper working mode, or the type of
labels you are using is not suitable. DW-PRT24T labels must not have a black line
If the printer recognizes every label but repeatedly fails to start at the beginning, go to
Label Setup and check the values of Offset, Left margin è Top margin for any
displacement.
Question: Why does the printer indicate “out of paper, when there is paper loaded?
Answer: See the answer above.
Question: Why does not the printer print on the whole label area?
Answer: With DW-PRT24T the width of the printing area is 48 mm, which is less
than the label width. You cannot change this, since it depends on the printing head width.
Question: How can I create a form containing variables and counters, that I want to
use with another program or printing device?
Answer: When you want to print a label from another program and device, all the
data that you want to change, must be placed in variables or counters. The elements of the
label can be arranged as you like. Make sure you provided enough space for the texts and
barcodes, when their data is of maximum length. Load the label in the printer.
What the different application or device has to do is to activate the form, send the new
values of the variables and counter and give a print order. This is done by sending direct
commands to the printer through the serial port.
Send <LF> (ASCII code 10) this will clear the printer’s buffer.
Send FR”FormName”<LF> command, where FormName is the name of the form in the
printer. The quotation marks are obligatory, space between symbols is not allowed, the
line finishes with <LF>. This command will set the form active.
Send ?<LF> command. This tells the printer to wait for new values of the variables and
counters.
For each of the variables and counters, defined in the form, send a single-line text ending
in <LF> (ASCII code 10). The variables are sent first, then the counters, by ascending
number. If you want to preserve the old value of a variable, send a blank line (only
<LF>).
Send print command Pn,m<LF>. m is the number of identical labels to be printed. n
defines how many sets of m labels will be printed. This can be used when we work with
counters after printing a set of labels their value will change automatically. To print one
label, the value of n and m must be 1.
For more information read the An example of creating a label for digital scales and the
manual for the printer.
Question: What is the largest size of a graphic the printer can load?
Answer: The file size depends on the free memory space, but it cannot exceed 48
KB. The printers support only PCX monochrome format, but the program can load also
monochrome BMP graphics by converting them before sending them to the printer. Since
the PCX files are compressed, you may assume that the size, after conversion will
decrease (graphics that are a result from a photo, make an exception usually they cannot
be compressed). If the graphic has X and Y values larger that the label’s, clip off the
unwanted parts or resize it beforehand not to occupy memory space unnecessarily.
Colour graphics can be converted to black-and-white images from Tools->Color to Black
& White Converter èëè or other application.
Question: The barcode element on the label is not printed out
Answer: You may have entered unalloyed barcode data. Usually this happens when
the barcode uses a variable the change in the variable made the barcode invalid. Invalid
barcode will be displayed on the screen as crossed with a red line. Check the barcode
data. You can reference EAN 13, EAN 8, UPC-A, UPC-E, Code 128, EAN 128, Code
39, Code 93
and Interleaved 2 of 5.
Question: Can I use DW-PRT24T to print from the standard Windows applications
(MS Word, Excel or Paint) and how?
Answer: Yes. If you install a driver for a printer working with EPL2 language, you
can print from any Win application. There are drivers for Windows 2000 and Windows
XP in the installation diskette. For Windows 95 and Windows 98 you can download
drivers at http://www.zebra.com. The Zebra LP2742 comes closest to the label size and
settings for DW-PRT24T The DW-PRT24T Compatibility switch MUST be turned off.
Question: Can I use DW-PRT24T to print text, not labels?
Answer: Yes. However you can use only one font, and no print text parameters as
bold, underlined etc. The commands for the printer are:
· @2<LF> Sets the printer in print text mode with font 2 (10x16).
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27

DigiWeigh DW-PRT24T Guida utente

Tipo
Guida utente

in altre lingue