Grant Instruments XUB Digital Ultrasonic Bath Range Manuale utente

Digital Ultrasonic Bath

xub Series 230V

Operating Manual

ES

IT

DE

FR

EN

If you have any feedback on Grant products or services, we would like to hear from

you. Please send all feedback to:

Grant Instruments (Cambridge) Ltd

Shepreth

Cambridgeshire

SG8 6GB

UK

Tel: +44 (0) 1763 260 811

Email: [email protected]

Representative in the European Union

Grant Instruments Europe B.V

Strawinskylaan 411

WTC, Tower A, 4th Floor

1077 XX, Amsterdam

The Netherlands

Email: [email protected]

xub Series 29666 V5

Operating Manual

1

EN

Contents

Safety instructions ................................................................................................ 2

Installation ............................................................................................................. 3

Controls ................................................................................................................. 4

Quick guide ............................................................................................................ 5

Operator instructions ............................................................................................ 6

Operator menu ....................................................................................................... 8

Starting the cycle ................................................................................................. 13

Cycle abort modes .............................................................................................. 14

Advanced menu ................................................................................................... 16

Using the memory card ....................................................................................... 22

Recording and downloading the data ................................................................. 23

Ultrasonic detergents .......................................................................................... 24

Technical information ......................................................................................... 25

Specifications ...................................................................................................... 26

Maintenance ........................................................................................................ 28

Returning equipment to Grant ............................................................................ 28

Warranty .............................................................................................................. 29

Compliance .......................................................................................................... 30

Troubleshooting .................................................................................................. 31

Compliance with the Control of Noise at Work regulations ............................... 32

Service record ..................................................................................................... 33

Notes .................................................................................................................... 34

Grant ultrasonic baths are manufactured in the United Kingdom

and conform to exacting international standards.

XUB Series 29666 V5

Operating Manual

2

Safety instructions

Use of products

The following products are covered by this operating manual:

• xub5, xub10, xub12, xub18, xub25 230V

The products listed above are a series of general-purpose ultrasonic cleaning baths

designed for indoor use by a professional user.

Electrical

Connect the unit to a 230VAC fully earthed supply..

It would be dangerous to operate an ultrasonic bath without an earth connected.

The unit is supplied with a removeable power lead rated at 5A. Do not use a power

lead rated less than 5A.

The removeable mains lead is the disconnect device and should remain accessible

while the unit is in use.

Ensure that excess mains cable is stored neatly.

General use

Ensure that the bath contains liquid before you switch it on.

Always use a basket to support items to be cleaned.

Not doing so may damage the bath and invalidate your warranty.

Do not place hands or fingers in the bath.

Care should be taken when operating the bath at higher temperatures as external

surfaces may become hot.

Never use toxic, flammable, acidic, caustic or corrosive solutions in the bath.

Avoid moving the bath when it is full of water.

Read the whole of these instructions. Safety may be impaired if they are not followed.

Contact Grant or its agent for advice on cleaning techniques or detergents.

Grant will not be responsible for damage or injury caused by incorrect use of the

equipment.

xub Series 29666 V5

Operating Manual

3

EN

Installation

The following parts and accessories are included with the Grant digital ultrasonic bath:

- 1 x basket

- 1 x lid

- 1 x MC card and MC USB card reader

- 1 x 2m length of drain hose

- 1 x hose tail

- 1 x Grant M2 detergent sample

- 3 x power cables (UK, EU, AUS)

How to install

Screw the hose connector into the drain valve located on the rear of the unit.

Locate the unit close to a drain or sink.

Connect one end of the drain hose to the hose connector, and locate the other end over

a drain or sink.

Connect the mains lead into a suitable mains socket.

Ensure that the mains plug and the switch are easily accessible.

Your Grant digital ultrasonic bath is now ready to use.

XUB Series 29666 V5

Operating Manual

4

Controls

Ensure your Grant digital ultrasonic bath is plugged into a

230VAC fully earthed supply.

Once plugged in, switch on your Grant digital bath via the

power on/off switch at the rear of the unit.

The switch will then illuminate.

The Grant digital bath is operated through a menu driven control system:

The different keys perform the following functions:

KEY 1:  – Starts and ends the ultrasonic cycle

KEY 2: Menu – Scroll through the menu

KEY 3: Up/On – Adjust the settings in the options menu

KEY 4: Down/Off – Adjust the settings in the options menu

KEY 3

KEY 4

KEY 1

KEY 2

xub Series 29666 V5

Operating Manual

5

EN

Maximum

Fill Line

Quick guide

Pour cold water into the bath so that it reaches the liquid level sensor but does not go

over the maximum fill line.

Add the required dose of detergent (see page 24).

Switch on the machine via the switch at the rear of the unit, just above the electrical

mains lead.

Press the “ ” key to accept the programmed cleaning cycle settings and start the

cleaning cycle.

At the end of the cleaning cycle, remove the basket from the bath and rinse the cleaned

items under clean running water. The lid can be inverted and the basket placed on top

to catch excess liquid as the items dry.

REMEMBER

- Always keep the bath full of liquid when in operation

- Do not put hot water above 50°C into the bath

- Always use the basket

- Never expose hands, fingers or other body parts to cleaning solutions

- Never use toxic, flammable, acidic, caustic or corrosive solutions

- Never breathe the fumes from strong solutions

- Rinse the items in clean water once the cycle is complete

Subjecting the bath to improper treatment or misuse will invalidate the warranty.

XUB Series 29666 V5

Operating Manual

6

Operator instructions

When the Grant digital bath power is turned on and the bath is full of liquid, the

following screens will display alternately.

When the water temperature is at or above the temperature set, the message “Temp

OK” will display.

To immediately start the cycle using the already set cleaning parameters, press the 

key.

The Grant digital bath remembers the set parameters from the previous cycle. If the

operator wants to run the same cleaning cycle, it is therefore not necessary to run

through the menu each time.

xub Series 29666 V5

Operating Manual

7

EN

When the Grant digital ultrasonic bath power is turned on and the liquid level is too low,

the following screen will display.

The level sensor can be disabled for specialist cleaning applications where deionised

(DI) water is used (see page 19).

When the bath is filled with liquid to the correct level, you will be given the option to

degas (see page 25).

By choosing YES, your Grant digital ultrasonic bath will run an automatic degas cycle.

The following screen will display.

The degassing process is to remove all bubbles from the water as these impede the

cleaning performance. Once all of the bubbles have come to the surface, complete the

degassing cycle by pressing the  key.

Note: If the machine detects low liquid level for more than 5 seconds, it is assumed that

the bath has been filled with fresh water, and you will be given the option of running a

degas cycle.

XUB Series 29666 V5

Operating Manual

8

Operator menu

A number of the Grant digital ultrasonic bath cleaning parameters can be altered.

To access the options menu and scroll through the various changeable parameters,

press the MENU key, when the following screen is displayed.

To scroll through the menu, press the MENU key. To exit the MENU at any time, press

the  key.

xub Series 29666 V5

Operating Manual

9

EN

Screen 1: Setting the temperature

Your Grant digital ultrasonic bath is fitted with a thermostat and heaters to ensure the

temperature of the cleaning liquid is maintained at the set temperature.

Use the UP and DOWN keys to accurately set the desired temperature of the cleaning

liquid between ambient and 70°C.

During normal use, the water heaters in your Grant digital ultrasonic bath will switch on

if the cleaning liquid temperature is lower than the set temperature.

[As a safety feature, your Grant digital ultrasonic bath will only turn on when the bath is

full of liquid.]

Please note that during normal operation, ultrasonic energy will heat the cleaning liquid

by up to 15°C per hour.

Your Grant digital ultrasonic bath cannot cool the cleaning liquid. If the liquid

temperature becomes too hot, you must either let it cool down, or refill the bath with

cooler water.

When the correct temperature is selected, use the MENU key to move to the next screen.

SAFETY NOTICE: When the temperature is set above 54°C, the case of the Grant

digital ultrasonic bath will become hot and care should be taken when touching the case.

A warning label is included in the literature pack that may be applied to the

unit if deemed necessary following a risk assessment

(see ISO 13732-1:2006).

XUB Series 29666 V5

Operating Manual

10

Screen 2: Setting the cycle time

Your Grant digital ultrasonic bath is factory pre-set with a cycle time of 15 minutes.

Use this screen to amend the cycle time. Use the UP and DOWN keys to scroll

through the numbers in order to increase or decrease the time.

When the desired cycle time has been selected, use the MENU key to move to the

next screen. This time setting will be saved until changed again in the Operator menu.

Screen 3: Setting the power level

Your Grant digital ultrasonic bath allows the power level of the ultrasonic activity to be

adjusted. This allows the cleaning cycle to be accurately tailored to the specific

cleaning application.

Use the UP and DOWN keys to scroll through the numbers between 50 and 100%.

When the desired power level has been selected, use the MENU key to move to the

next screen.

xub Series 29666 V5

Operating Manual

11

EN

Screen 4: Degas

As well as the automatic degas function that you are offered when the machine is first

switched on, this menu function allows you to run a degas cycle whenever a cleaning

cycle is initiated.

Use the ON and OFF keys to select the required option (see page 25)

If you switch the degas function ON, your Grant digital ultrasonic bath will run a degas

cycle every time the cycle start key is depressed.

Once the desired option is selected, press the MENU key to move to the next screen.

XUB Series 29666 V5

Operating Manual

12

Screen 5: Frequency leap

Your Grant digital ultrasonic bath is equipped with Frequency LEAP technology to

provide more homogeneous ultrasonic cleaning activity throughout the whole tank.

Using advanced software and generators, the Grant digital ultrasonic bath uses

Frequency LEAP to create a pseudo-random leaping action between a wider

frequency range, reducing standing waves and improving the cleaning action.

For different cleaning applications the operator can choose between Frequency LEAP

and fixed frequency ultrasonic activity.

Use the ON and OFF keys to select the required option.

Once the correct option is selected, press the MENU key to move to the next screen.

xub Series 29666 V5

Operating Manual

13

EN

Starting the cycle

Once all the Operator Menu options have been selected,

the following screen will display.

The Grant digital ultrasonic bath is now ready for use.

Press the  key to begin the cleaning cycle.

When the Grant digital ultrasonic bath is in operation, the following screen will display.

(The actual time and temperature may show different values.)

The operator can abort the cycle at any time by pressing the  key.

On successful completion of the cycle, the following message will be displayed for

three seconds.

XUB Series 29666 V5

Operating Manual

14

Cycle abort modes

If the cycle is aborted, the reason for the failure will be displayed.

If the operator aborts the cycle, the following screen will be displayed.

If the Level sensor is set to ON, and the liquid drops below the required level during

operation, the cleaning cycle will stop and the following screen will be displayed.

The Grant digital ultrasonic bath will not operate again until the tank is filled to the

correct level.

If the power to the ultrasonic generator should fall below a certain level during

operation, the cleaning cycle will stop and the following screen will be displayed.

xub Series 29666 V5

Operating Manual

15

EN

If the liquid temperature exceeds the allowed maximum of 70°C (160°F), the following

screen will be displayed

If the internal heater exceeds its allowed maximum, the following screen will be

displayed.

If the unit overheats due to prolonged use, the following message will be displayed

In each instance of a cycle abort, the cycle count in the Advanced Menu will still log

the cycle as complete.

XUB Series 29666 V5

Operating Manual

16

Advanced menu

The Advanced Menu allows different settings to be specified which may not require

regular changes and also allows the usage history of the individual Grant digital

ultrasonic bath to be seen.

To access the advanced menu, press and hold Keys 3 and 4 together.

The following screen will then appear:

In order to scroll through the settings available in the Advanced Menu, press the

MENU key.

You may exit the Advanced Menu at any time by pressing the  key.

Screen 1: Serial number

The first screen shows the unique serial number of your Grant digital ultrasonic bath

and the version of software (The numbers in the image below will not reflect your

model).

Press the MENU key to move to the next screen.

KEY 3

KEY 4

xub Series 29666 V5

Operating Manual

17

EN

Screen 2: Time used

This screen shows the total time your Grant digital ultrasonic bath has been in use in

days, hours and minutes; i.e. the sum of all the cleaning cycle times since new.

For example, the screen above shows that the bath has been in use for a total of 2

days, 5 hours and 27 minutes.

Screen 3: Clock

The Grant digital ultrasonic bath is fitted with a real time clock. This is factory set to

the correct time and date, but can be changed by the operator.

To change the time and date, scroll through the settings by pressing the MENU key

and amend by pressing the UP and DOWN keys. When all the settings are correct,

press the MENU key to move to the next screen.

Screen 4: Cycle count

The second screen shows the number of cycles which the Grant digital ultrasonic bath

has run since new.

The cycle count shows all cycles which the bath has begun and includes those cycles

which are not completed; i.e. those cycles aborted by the operator or because the

liquid level was low.

XUB Series 29666 V5

Operating Manual

18

Screen 5: Low power

In its factory pre-set mode, the Grant digital ultrasonic bath will maintain the set liquid

temperature. This means that it is consuming power when sitting idle (i.e. when the

sonics are not running).

The Grant digital ultrasonic bath can be set to save power when not in use.

Setting Low Power to ON means that after five minutes of inactivity, the Grant digital

ultrasonic bath will enter its SLEEP mode – the screen illumination will power down,

and the internal water heater will not operate.

The Grant digital ultrasonic bath uses less than 10 Watts of power whilst in SLEEP

mode.

By setting Low Power to OFF, the Grant digital ultrasonic bath screen will maintain the

set liquid temperature; i.e. when the liquid temperature falls below the specified

setting, the heaters will automatically switch on, meaning the bath is immediately

ready for use when required.

When the desired option is selected, use the MENU key to move to the next screen.

La pagina sta caricando ...

Grant Instruments XUB Digital Ultrasonic Bath Range Manuale utente

Grant Instruments XUB Digital Ultrasonic Bath Range Manuale utente

in altre lingue

Documenti correlati

Altri documenti