Palm AT&T Treo 680 Guida utente

Treo 680 i

Table of Contents

Welcome to Cingular 1

Overview: Your Palm

®

Treo

™

680 smart device 1

Setup 2

Insert the battery 2

Complete setup 3

Navigation 4

Wake up the touchscreen and turn it off 4

Move around the touchscreen 5

Use the keyboard 6

Open applications 8

Your phone 9

Turn your phone on and off 9

Open the Phone application 10

Make and receive calls 11

Set up voicemail 12

What can I do when I’m on a call? 13

Your Push To Talk application 15

How Push To Talk works 15

Set up PTT 15

Create a PTT contact list 17

Create a group 18

Responding to Invitations 18

Make a PTT call 19

Your email 20

Choose the best email option 20

ii Treo 680

Set up personal email 20

Set up corporate email 23

Synchronization 29

Why synchronize information? 29

Synchronize for the first time 29

Your Contacts, Calendar, messages, and web 31

Contacts 31

Calendar 33

Messaging 34

Web browser 35

Your music and pictures 37

Listen to music 37

Take pictures 40

Troubleshooting 42

Tips a nd tri cks 44

Keyboard 44

Phone 44

Data 45

Typing 45

Browser 46

Navigation 46

General 46

Status indicators 47

Treo 680 1

Welcome to Cingular

Overview: Your Palm

®

Treo

™

680 smart device

Indicator light (phone

and charge indicator)

Calendar

Microphone

Earpiece

Menu

Send

Phone

Side button

Volume

Power/End

Xpress Mail

Applications

5-way navigator and

Center button

Multi-connector

Headset jack

Stylus

Ringer switchInfrared (IR) port

Stylus

2 Treo 680

Setup

Insert the battery

1. Remove the battery door.

2. Insert the battery into the compartment.

3. Slide the battery door back into place.

4. Connect the charger.

The touchscreen on your Palm

®

Treo

™

680 smart device turns on. Wait

for the progress bar to fill and the language selection screen to appear.

Tip

Your phone won't

work without a SIM

card. The SIM card

is usually pre-

installed in your

Treo 680, unless

you’re upgrading

from a Cingular

phone. Check the

SIM card tray to see

if the SIM card is

installed. The SIM

card tray is tucked

away in a drawer

in the battery

compartment. See

"I need to insert my

SIM card" on page

42 for more info.

If you need a SIM

card, call AT&T

Wireless at 1-800-

331-0500.

Align battery

contacts with

compartment

contacts

Press battery door

release

Treo 680 3

Complete setup

1. Select the language you want to use.

2. Follow the onscreen instructions to set the date and time.

Note: If you want your Treo 680 to obtain the date, time, and time zone from the

local network, accept the default setting on the Date & Time screen.

3. When the setup is complete, press Applications and select

Quick Tour .

4.

Recommended: Review the Basics and Phone sections of the Quick Tour

before using your Treo 680.

Note: If your Treo 680 doesn’t turn on after you charge it, do a soft reset by removing

the battery and reinserting it. For more information on resetting your Treo 680, see

User Guide: Your Palm

®

Treo

™

680 Smart Device on the CD.

Tip

You need a high-

speed data plan for

email, web

browsing, and

multimedia

messaging. Find

out if you have a

plan by checking

your AT&T Wireless

bill or calling AT&T

Wireless: dial 611

from your Treo 680

or call 1-800-331-

0500 from any

phone.

Tip

Need help setting

up your Treo 680?

Call the Palm Setup

Help desk for AT&T

Wireless customers

at 1-800-331-

0500.

4 Treo 680

Navigation

Wake up the touchscreen and turn it off

The phone and the touchscreen of your Palm

®

Treo

™

680 smart device can

be turned off and on separately. When you wake up the touchscreen and

leave the phone off, you can continue to use the other wireless features;

for example, when you’re on a plane, you can still manage your calendar,

play MP3 files, or write email offline.

If you’re taking your Treo 680 out of the box and turning it on for the first

time, the phone is already on. You just need to wake up the touchscreen.

1. Press and release

Power/End to

wake up the touchscreen.

2. Press Center to

turn off Keyguard.

3. Press and release

Power/End to turn

off the touchscreen and

lock the keyboard.

Tip

Press Phone,

Calendar, or Xpress

Mail to wake up the

touchscreen and

open the

corresponding app.

Press Applications

to wake up the

touchscreen and

open Applications

View.

Did You Know?

You can set how

long the

touchscreen stays

on. Press

Applications, select

Preferences, select

Power, and then

adjust the Auto-off

after setting.

Center

Power/End

Treo 680 5

Move around the touchscreen

To move around the touchscreen on your Treo 680, you can use the 5-way

navigator, or you can tap items on the touchscreen with the stylus. The 5-way

includes the following buttons:

Highlight and select items

The highlight identifies which item is affected by

your next action. Use Left , Right , Up ,

and Down on the 5-way to move the

highlight from one item to another. The

highlight can take two forms: A b

order glow

around an entire screen, an onscreen button, or

a pick list; and light text on a dark background.

After highlighting an item, you can select

(activate) it by pressing Center or by

tapping it with the stylus. When an entire screen

is highlighted, switch the highlight to the first

item by pressing Center .

Did You Know?

On most screens,

one item—a button,

a list entry, or a

check box—is

highlighted by

default.

Tip

If the item you want

doesn’t appear on

the touchscreen, try

tapping the

onscreen scroll

arrows to view

more info.

Up

Right

Left

Center

Down

6 Treo 680

Select menu items

Many applications have menus to

give you access to additional

features. These menus are usually

hidden from view, but they appear

when you press Menu .

1. Press Menu to display an

application’s menus.

2. Press Right and Left to

switch between menus.

3. Press Up and Down to highlight a menu item.

4. Press Center to select the menu item, or press Menu to close

the menu and cancel your selection.

Use the keyboard

Tip

Most menu items

have a shortcut. To

use a menu

shortcut, press

Menu + the

shortcut letter. For

example, in

Calendar, you can

press Menu + D to

delete an event.

Menu

shortcut

letter

Menu

Backspace

Return

Alt

Space

Option

Shift/Find

Backlight (Option

+ P)

Treo 680 7

Enter lowercase and uppercase letters

• To enter lowercase letters, press the key you want.

• To enter an uppercase letter, press Shift/Find and then press a letter

key—no need to hold Shift/Find while entering the letter.

• To turn Caps Lock on, press Shift/Find twice. The following symbol

appears . To turn it off, press Shift/Find once.

Enter numbers, punctuation, and symbols

Numbers, punctuation, and symbols appear above

the letters on the keys. To enter these characters,

do one of the following:

• Press Option , and then press the key with the character—no need to

hold Option while pressing the second key.

• To turn Option Lock on, press Option twice. The following symbol

appears . To turn it off, press Option once.

Enter more symbols and accented characters

1. Enter the character that corresponds to the character you want.

2. Press Alt .

3. Highlight the character you want on the pop-up list, and then press

Center to select the highlighted character.

Note: To enter characters such as _ • \ % =, press Alt by itself, after a space or at

the beginning or end of a line.

Did You Know?

Some application

views automatically

default to Option

Lock, such as the

Dial Pad in the

Phone application.

In this case, you do

not need to press

Option to enter

numbers.

Tip

Alternate

characters are

grouped by their

similarity to the

base key. For

example, the

alternate

characters for the

E key are: É, È, Ë,

and Ê. You can find

a complete table of

the alternate keys

in the User Guide.

Letter

Symbol

8 Treo 680

Open applications

When you open an

application, you

automatically close the

application you were

previously using and save

any information you created

in that app.

Use the quick buttons

The front of your Treo 680

has three quick buttons that

open applications. The

fourth button opens

Applications View.

Use Applications View

You can access all available applications

through Applications View.

1. Press Applications .

2. Use the 5-way to highlight the

application you want to use.

3. Press Center to open the selected

application.

Tip

In Applications

View, you can enter

the first few letters

of an application

name to highlight it.

For example, if you

press P,

you highlight

Phone; if you

quickly press PR,

you highlights

Prefs. If you pause

and then press R,

you highlight the

first application

that starts with R.

Did You Know?

Press Applications

repeatedly to cycle

through various

categories of

applications.

Phone

Calendar Xpress Mail

Applications

Treo 680 9

Your phone

Turn your phone on and off

When your phone is on, it is connected to the AT&T Wireless network

(provided you’re in a coverage area) so that you can make and receive phone

calls and use wireless services, such as email, messaging, and the web

browser.

During initial setup, your phone is automatically turned on, so you can use

wireless services right away. If you turn off your phone, you can still use the

organizer and media features such as Calendar and Pics&Videos.

1. Wake up the touchscreen.

2. If prompted, press Center to turn off

Keyguard.

3. Press and hold Power/End to turn

on your phone.

You know your phone is on and that you’re

inside a coverage area when you see the signal-

strength icon at the top of the Main tab of

the Phone app.

Note: If you’re prompted for a PIN code, your SIM

card is locked. If you don’t know your PIN code, ask

AT&T Wireless to provide you with the PIN code.

4. Press and hold Power/End again to turn off your phone.

You know your phone is off when you see Phone Off at the top of the Main

tab of the Phone app.

Tip

If you’re outside a

coverage area, the

name Cingular does

not appear in the

upper-left corner

and the indicator

light flashes red.

Tip

Don’t remember

your mobile phone

number? To find

your phone

number, press

Phone, press Menu,

select Options, and

then select Phone

Info.

Main tab

Signal-strength icon

10 Treo 680

Open the Phone application

Press Phone to open the Phone application. The phone application

has five tabs.

Dial Pad

Favorites

Main

Status icons

Contacts

Call Log

Treo 680 11

Make and receive calls

To make and receive calls, your phone must be on. When your phone is off,

your incoming calls go to voicemail.

Dial using the keyboard

1. Press Phone .

2. If prompted, press

Center to turn off

Keyguard.

3. Use the number keys

on the keyboard to

enter the phone

number. (You must be

on the Main or Dial Pad

tab to enter the phone

number.)

4. Press Send to make the call.

5. Press Power/End to end the call.

Answer calls

To answer a call, press Send or

select Answer.

Did You Know?

You can set which

tab of the Phone

app appears when

you open the

application. In the

Phone app, press

Menu, select

Options, and then

select Phone

Display Options.

Set the default

view to the tab

you want.

Did You Know?

If the headset is

attached, you can

press the headset

button to answer a

call and to end a

call. (

The headset

button may work

differently on

headsets other

than the one

provided with your

Treo 680.)

Center

Power/End

Number

keys

Send

Phone

12 Treo 680

Ignore calls

To ignore a call, do one of the following:

Send the call to voicemail: Press Power/End or select Ignore.

Send the caller a text message: Select Ignore with Text. This option

sends the call to voicemail and opens a text message addressed to the

caller. (Sending text messages to land-line phones may not be supported.)

Silence the ringer

To silence the phone while it is ringing, do one of the following:

• Press any key except Send, Power/End, or the 5-way.

• Slide the Ringer switch to Sound Off .

Set up voicemail

Your AT&T Wireless service includes voicemail. Keep in mind that airtime

and other charges apply when using voicemail from your Treo 680.

1. Press Phone .

2. Press and hold 1 to dial the AT&T Wireless automated voicemail system.

3. Follow the voice prompts to set up your voicemail.

To retrieve your voicemail later, press Phone and then press and

hold 1.

Tip

Pressing Phone

silences the ringer,

but it does not

answer the call.

Tip

You can also access

the AT&T voicemail

system by selecting

the Favorites tab

and then selecting

the Voicemail

favorite.

Tip

If you can’t connect

to the AT&T

Wireless voicemail

system, contact

AT&T Wireless for

assistance:

dial 611 from your

Treo 680 or call

1-800-331-0500

from any phone.

Treo 680 13

What can I do when I’m on a call?

When you make or receive a call, Active Call View appears.

Use the 5-way or stylus to select any of the following onscreen

buttons:

0

Tip

While a call is in

progress, press the

Volume button on

the side of your

Treo 680 to adjust

the call volume.

Did You Know?

You can add a

picture to a contact

entry. See the User

Guide for details.

Tip

If you’re using a

wired headset,

simply unplug the

headset to switch

to holding your Treo

to your ear.

Turns on the speakerphone so you can hear the caller

through the device’s speaker. This lets you check your

calendar, look up contact info, take notes, and use other

features during a call.

Turns off the speakerphone when it is on.

Replaces the Speakerphone button when you use a

Bluetooth

®

hands-free device. Select this button to stop

using the hands-free device.

Caller’s name and

number

Call duration

Button label

Call status

Caller ID photo (if assigned)

14 Treo 680

0

Did You Know?

If the touchscreen

dims during a call,

press any key

except Send or

Power/End to

restore the

touchscreen

brightness.

Puts a call on hold. To take the call off hold, select this

button again.

Lets you make another call while the first call is on hold.

Opens the Dial Pad so you can dial additional numbers, for

example, another phone number or an extension.

Dials any extra digits, such as phone-tree selections, if you

assigned these to a speed-dial favorite button. See the User

Guide for more information on assigning extra digits to a

speed-dial favorite button.

Mutes the microphone so that you can’t be heard on the

other end. When you want to speak, select this button again.

Treo 680 15

Your Push To Talk application

How Push To Talk works

Push To Talk from AT&T Wireless is a service that enables you to talk to as

many as 29 people at one time so long as they are members of the AT&T

Wireless Push To Talk service and they are available. It is a walkie-talkie type

of service, which means that only one person at a time can be heard by the

others on the call. When finished speaking, the speaker must signal that the

microphone is open and available for another person to begin speaking.

Set up PTT

To use PTT, you must first subscribe to the AT&T Wireless Push to Talk service

and then set up the Push To Talk application on your Palm

®

Treo

™

680 smart

device.

Get ready to use PTT

To set up the Push To Talk application, do the following:

1. Press Applications .

2. Select Push To Talk.

3. Select Yes to set up Push To Talk.

4. Enter the name you want people to see

when you’re available to talk, and then select

OK.

5. Wait for the Welcome to Push To Talk screen

to appear. If an error appears instead, contact

AT&T Wireless for assistance.

6. Select Done.

Tip

Find out more

about Push To Talk

in the User Guide

by selecting My

Treo on your device

or selecting the

User Guide on your

computer.

16 Treo 680

When you first set up Push To Talk, your availability is automatically set to

Available. You can change your availability setting at any time.

a

Change your availability

1. Press the Side button to go to PTT.

2. Select the availability pick list in the

upper-right corner, and then select the icon

that describes your availability.

Here are the icons:

0

Note: The Available option appears in the availability pick list only when the

Ringer switch is set to Sound On . Similarly, the Silent option appears in the

availability pick list only when the Ringer switch is set to Sound Off .

Tip

To check your

availability setting,

just glance at the

availability icon in

the upper-right

corner of the PTT

screen. Your

availability status

also appears in the

main views of the

Phone application.

Tip

Remember, to

contact a person or

group via PTT, they

must also subscribe

to the AT&T

Wireless Push To

Talk service.

Available: Your Ringer switch is set to Sound On , and you

automatically hear incoming PTT calls.

Silent: Your Ringer switch is set to Sound Off . When a PTT call

comes in, you get an alert. You can choose whether to answer or

ignore the PTT call.

Do Not Disturb: You can make PTT calls, but you cannot receive

them.

Log Out: You cannot make or receive PTT calls.

Treo 680 17

[insert screen ptt_newcontact here]

Create a PTT contact list

To add a contact, do the following:

1. Press the Side button to go to PTT.

2. Select New, and then select New Contact from the pop-up menu.

3. Select Lookup.

4. Select the contact you want to add, and then select Add.

5. (Optional) Select the name and change it to the name you want to see in

your PTT list, for example, a nickname. You can use up to 20 characters for

the name.

6. Select OK to send the contact an invitation

to join your PTT list.

The contact’s name appears in your PTT list, and

the icon indicates that the contact has not

responded to the invitation. This icon changes

to reflect the contact’s current availability status

once they accept the invitation.

Tip

If a contact is not

listed in your

Contacts

application, you can

add a contact on

the spot by

entering the

person’s name and

mobile phone

number. Be sure to

include the area

code, but you don’t

need to enter

hyphens or

punctuation; PTT

enters those for

you.

Tip

Need to add a

group member who

is not already a

contact in your PTT

list? After the group

is created, you can

add new members

and contacts.

18 Treo 680

Create a group

Groups are an easy way to make calls or to send voice or text messages to

multiple PTT contacts at the same time. You can create up to 30 groups.

Each group can include up to 29 contacts.

1. Press the Side button to go to PTT.

2. Select New, and then select New Group from the pop-up menu.

The New Group dialog box shows you all the contacts in your PTT list.

3. Enter a name for the group (up to 20 characters).

4. Check the box next to each contact you want to add to the group, and

uncheck any contacts you do not want to include in this group.

5. Select OK.

Responding to Invitations

When you’re invited to join someone else’s PTT list, you receive an

invitation. Select one of the following to respond to an invitation:

Accept: Sends an acceptance message to the contact or group owner. The

group’s name appears in your PTT list and your name appears in the

requester’s PTT list or group.

Decline: Sends a message to the contact or group owner indicating that

you don’t want to join the PTT list or group.

Defer: Places the invitation in your Pending list so that you can respond

later by selecting the Pending invitation icon in the title bar or by

responding to an invitation reminder.

Tip

You can send a text

message to up to

ten recipients at a

time. To send a text

message to a group

of more than ten

members, select

the group, and then

select Dynamic call

in the

accompanying pick

list. Select up to ten

members. Send

your text message.

Repeat this process

until you have sent

your text message

to all the recipients

in the group.

La pagina si sta caricando...

Palm AT&T Treo 680 Guida utente

Questo manuale è adatto anche per

Palm AT&T Treo 680 Guida utente

in altre lingue

Documenti correlati

Altri documenti