Viscount Legend ‘70s Editor Manuale del proprietario

Ed. 1.1

User Guide - EN

Guida Utente - IT

Legend 70’s Editor

User Guide

Legend 70's Editor

INDEX

NOTES ABOUT THIS GUIDE................................................................................................................................................ 1

GENERAL CHARACTERISTICS OF LEGEND '70s EDITOR ............................................................................................ 2

LEGEND '70s EDITOR ........................................................................................................................................................... 2

Minimum system requirements ......................................................................................................................................... 2

Instrument Requirements .................................................................................................................................................. 2

STARTING THE APPLICATION............................................................................................................................................ 3

Installing the application .................................................................................................................................................... 3

Connecting the Legend '70s ............................................................................................................................................. 3

Error messages displayed during connection ................................................................................................................. 5

Sections of the Legend '70s Editor ................................................................................................................................... 6

LIVE SECTION ........................................................................................................................................................................ 7

Song Mode ......................................................................................................................................................................... 8

Program Mode ................................................................................................................................................................... 9

Live Set 1 and Live Set 2 ................................................................................................................................................ 10

SONG SECTION ................................................................................................................................................................... 11

PROGRAM SECTION .......................................................................................................................................................... 13

File transfer between computer and iPad ...................................................................................................................... 14

TIMBRE SECTION ............................................................................................................................................................... 17

SYSTEM SECTION .............................................................................................................................................................. 20

NOTES ABOUT THIS GUIDE

 Please keep this user guide safe

 This user guide is an integral part of the product. The descriptions and illustrations contained in this

publication are subject to change.

 Without prejudice to the essential characteristics of the product, the manufacturer reserves the right to make

any changes to parts, details and accessories that it deems appropriate for the improvement of the product

or for construction or commercial needs, at any time and without undertaking to update this publication

promptly.

permission of the manufacturer.

 All trademarks mentioned in this manual are the property of their respective manufacturers.

 Please read the enclosed information carefully. You will avoid wasting time and get the best performance

from the product.

 The initials or numbers in square brackets [ ] indicate the names of the commands and connectors of the

instrument. For example, [VOLUME] indicates VOLUME potentiometer.

 The illustrations and screens are for information purposes only and may differ from your application.

 The information described in this guide refers to the application version when the document was written and

may not reflect the functionality of the version you are using. Therefore, please check the website

www.viscountinstruments.com periodically for the latest version and the availability of a more up-to-date

guide.

 For a description of the adjustable functions and parameters in the Legend '70s Editor but also present in

the Legend '70s instrument and not described in this user guide, please refer to the user manual of that

instrument.

This user guide is updated to version 1.02 of the application.

User Guide

Legend 70's Editor

GENERAL CHARACTERISTICS OF

THE LEGEND '70s EDITOR

The Legend '70s Editor is an application available for Windows, MacOS and iOS, which allows real-time

adjustment and storage of all parameters available in the Legend '70s instrument. The application also allows

the selection of various instrument models and the adjustment of additional sound parameters of the E.Piano,

Clavi and A.Piano modules. You can also save any Program in your computer and reload it quickly and easily.

The Legend '70s Editor has a clear and simple user interface, which works with any screen resolution.

Specifically, the Legend '70s Editor allows you to:

select the instruments’ Song mode and select the Songs and Programs they contain.

select the instruments’ Program mode and select Programs.

turn on/off and adjust the volumes of each installed module in a single screen.

create Live Sets, i.e. groups of up to 24 Programs that can be quickly recalled with a simple click.

program Songs and Lists.

adjust all Program parameters.

save the Programs to a computer and reload them back to the instrument when needed.

select the desired instrument model for each position of the E.Piano, Clavi and A.Piano timbre selector.

adjust additional sound generation parameters of the E.Piano, Clavi and A.Piano modules.

adjust the main parameters of the instrument's System menu.

Minimum system requirements

Operating System: Windows 7 (64 bit), Windows 8 (64 bit), Windows 10, Mac OS X ver. Lion 10.7 or later, iOS

ver. 9.2 or later.

Ports on computer: a standard USB

Computer connection: A USB type A-B cable no longer than 3 meters.

Connection with iPad: Camera Connection Kit. One USB cable type A-B not longer than 3 meters.

Instrument Requirements

Model: Legend '70s Artist-W, Artist or Compact

Firmware Release: 1.03 or higher (the release currently installed in the instrument is shown on the display when

the instrument is turned on or by the Legend '70s Editor at the top right as shown below).

User Guide

Legend 70's Editor

STARTING THE APPLICATION

Installing the application

The application installation varies depending on your operating system.

Windows

1. Download the file Legend ‘70s Editor Setup vX.yy.exe from www.viscountinstruments.com

2. Click on the downloaded file to start the installation and follow the prompts on the screen.

3. Once the installation is complete, click on the file icon or on the desktop icon to launch the application.

MacOS

1. Download the Viscount Legend '70s Editor (Mac OS X) vX.YY. app from www.viscountinstruments.com.

2. Open the .zip file and copy the contents to your "Applications" folder.

3. Once the installation is complete, launch the application from the "Applications" folder.

iOS

1. Download the Legend '70s Editor app from the App Store.

2. Once the installation is complete, click on the icon to launch the application.

Connecting the Legend '70s

Using PC or MacOS, plug a USB Type A connector into one of the USB ports of your computer and the Type B

connector into the [USB TO HOST] port on the instrument.

When using an iPad, connect the instrument via the optional Camera Connection Kit by plugging the Type A

connector into the USB port on the iPad Connection Kit.

You can connect while the instrument is already on and the application already open.

With Windows operating systems, if this is the first time you connect the instrument to your computer via USB,

the operating system will ask you to install the necessary drivers. To do so, follow the prompts on the screen.

USB CABLE CAMERA CONNECTION KIT

NOTES

- With iPad we recommend using the original Camera Connection Kit. If a non-Apple adapter is used, correct

operation is not guaranteed.

- If the instrument Local Off function (UTILITY / MIDI SETTINGS / LOCAL CONTROL screen) is active, for the

Legend '70s Editor to work correctly, on the connected computer or iPad the Thru function has to be activated

between the MIDI input and output ports used with the instrument.

- If the operating system denies saving the file due to lack of permissions, or if you are no longer able to overwrite a

file already present on your computer (without displaying an error message), right-click on the file icon (also on the

desktop shortcut), then choose "Properties". Now select the "Security" tab and check "Run this program as

administrator". Finally click on "Ok".

Connector

type A

Connector

type B

User Guide

Legend 70's Editor

When started, the application will show this page:

First, connect to the instrument, to do so click the

CONNECT button.

If the connection time is longer than expected, this

message is displayed:

The name of the connected Legend 70’s model will appear a

few seconds later (as in the picture) and Legend 70’s Editor

will show the current parameters of the instrument.

This means that all the adjustments performed through the

Legend 70’s Editor interface before connecting the instrument

will be lost.

NOTE

Subsequent restarts of the application will open the LIVE screen section last selected prior to closing the app.

NOTE

On older computers, you can be disconnected if many other

applications, in addition to the Legend 70’s Editor, are open and

there’s a high computer workload. In this case we recommended

you close unneeded applications.

User Guide

Legend 70's Editor

Error messages displayed during connection

Device not found

(Device not found! Please, check USB connection and retry...)

The Legend '70s Editor cannot connect to the instrument because it is not being detected between USB devices

connected to your computer or iPad.

If the instrument is properly connected to your computer or iPad, close the application, then turn the instrument

off and on again and restart the application.

MIDI port already in use

(The midi port may be in use by another application. Please, close it and retry)

The Legend '70s Editor cannot connect to the instrument if there are other applications open in the computer

that use the port connected to the Legend '70s and identified as "MIDI2 (Viscount Legend)" or "Viscount Legend

Port 2". If you want to use the Legend '70s Editor, close the other applications connected to this port.

Connection lost

(The connection to the device has been lost. Please, reconnect to the device)

The Legend '70s Editor has lost communication with the connected instrument. Make sure it is turned on and

that the USB cable or Camera Connection Kit (when used with an iPad) is connected and undamaged.

Data reception problems

(Failed to receive data. Please reconnect to the device)

The Legend '70s Editor cannot receive all the necessary data from the instrument.

If the instrument is properly connected to your computer or iPad, close the application, then turn the instrument

off and on again and restart the application.

Instrument firmware not updated

(Legend '70s firmware is out of date! Please, update the firmware to rel 1.03 or later)

In order to use the Legend '70s Editor, firmware version 1.03 or later must be installed on the instrument.

Download the latest available version from www.viscountinstruments.com

Legend '70s Editor version not updated

(Legend '70s Editor is too old. Please, download the latest editor)

You are running and older version of Legend ‘70s Editor which is not compatible with the firmware currently

installed on your instrument. Download the latest version of the editor at www.viscountinsntruments.com.

User Guide

Legend 70's Editor

Sections of the Legend '70s Editor

The top menu bar of the screen is where you’ll find the buttons for the Legend '70s Editor sections and for

connecting the editor to the instrument.

These buttons recall the following areas:

LIVE: to a live use of the instrument.

SONG: to create Songs and Lists.

PROGRAM: to edit Programs.

TIMBRE: to advanced adjustments of the timbres in the E.Piano, Clavi and A.Piano modules.

SYSTEM: to set the instrument system parameters.

CONNECT: to connect/disconnect the Legend '70s Editor to the instrument.

METHODS OF PARAMETER ADJUSTMENT

The adjustment of the parameters is simple and intuitive and can be done in two modes:

 Click on the + and - buttons to increase or decrease the value or ON/OFF buttons to activate or deactivate a

control.

 In continuous controls (slider) by moving the cursor or using the mouse wheel.

 Click once on the displayed value and enter the value with the keyboard.

User Guide

Legend 70's Editor

LIVE SECTION

The Live section of the Legend '70s Editor has been designed to help the musician to select Programs and

Songs during the live performance. Thanks to the editor user interface, the selection of Programs is much faster

as they are displayed in a single screen and with a single click you can immediately select a Program or Song

without the need to scroll through unnecessary ones.

It’s also possible to create two Live Sets, consisting of a group of 24 Programs, in which you can select one of

the available Programs with a single click.

Click the LIVE button described in the previous chapter to display the following screen:

There are four buttons on the left to choose the desired LIVE mode:

SONG MODE: to recall Lists and Songs on the instrument.

PROGRAM MODE: to recall Programs on the instrument.

LIVE SET 1: to recall the 24 Programs of Live Set 1.

LIVE SET 2: to recall the 24 Programs of Live Set 2.

User Guide

Legend 70's Editor

Song Mode

Below is a description of the areas on this screen:

List and Song Selection

Control of the modules

List selection area.

Click in this area to open the drop-down menu to select

the desired List.

Song selection area.

The boxes show the location and the name of the Song.

Click in the Song boxes to select the desired Song.

Volume slider control

of the modules.

Module names.

Shows the modules

Output Routing.

Module on/off buttons.

Timbre selected in each module.

Double click in these boxes to bring up the

timbre selection screen.

For the External module the selected Program

Change is indicated.

User Guide

Legend 70's Editor

Song Program Selection

Program Mode

These boxes show the four parts of the currently selected Song and

display the name and location of the Program in each block.

Click on the boxes to select the part and then the desired Program on the

instrument.

These boxes show the 16 Program banks.

Click on the boxes to view the 16 Programs of the desired bank.

These boxes show the location and name of the 16

Programs in the selected bank.

Click on the boxes to select the desired Program.

The box turns blue to confirm your selection.

Click this button to display the

module controls screen

described in Song Mode.

User Guide

Legend 70's Editor

Live Set 1 and Live Set 2

These boxes show the location and name of the 24 Programs in the

selected Live Set.

Click the boxes to select the desired Program on the instrument.

The box turns blue to confirm your selection.

Double-click on a box to display the menu where you can select the

Program to insert in the desired Live Set location.

Click this button to display the

module controls screen

described in Song Mode.

User Guide

Legend 70's Editor

SONG SECTION

In the Song section of the Legend '70s Editor you can edit both Lists and Songs, i.e. assign the Programs to the

four parts of the Song and define the order of the Songs within the Lists.

Click on the SONG button in the top menu of the Legend 70's Editor to display the Song section main screen.

Selecting Lists, Songs and assigning Programs to parts

List selection area.

Click in this area to open the drop-down menu

to select the desired List.

Song selection area. The boxes show the location

and the name of the Song.

Click in the Song boxes to select the Song you

have to modify.

Location and name of the currently

selected Song in the instrument.

Click this button to permanently

store the modified Song.

Click this button to display the

Edit List screen (described

below).

These boxes represent the four parts of the current Song.

Click on the boxes to select the desired part. The box turns

blue to confirm your selection.

Click on the black rectangle showing the location and name

of the Program to display the menu in which to select the

Program to assign to the part.

User Guide

Legend 70's Editor

Editing the List

Pressing the EDIT LIST button recalls the current List edit screen, selected in the drop-down menu shown in the

previous image (SONG LIST field).

EDIT BUTTONS

On the left are six buttons that allow you to perform the following operations:

CLEAR LIST: the List is initialized with all Init Song.

COPY LIST: the List is copied from the SOURCE List.

REMOVE: the selected Song (blue box) is removed.

INSERT: an Init Song is inserted in the position preceding the selected one.

MOVE UP: the selected Song is moved up one position.

MOVE DN: the selected Song is moved down one position.

The List you are editing is displayed here.

Click on this box to select the Source List from

which you want to choose the Songs to be

included in the List you are editing.

To insert a List Song on the right (SOURCE), drag it

with the mouse to the desired position in the List on

the left (EDIT LIST).

Click this button to undo the

changes you made and return to

the main screen of the Song

section.

Click this button to store the

modified List

User Guide

Legend 70's Editor

PROGRAM SECTION

In the Program section of the Legend '70s Editor you can edit the Programs. In this section you can find all the

parameters showed in the display menus of the Legend '70s, you can also save the individual Program to your

computer or iPad and reload it when desired.

Click the PROGRAM button on the top menu of the Legend 70's Editor to display the screen for a specific

section of the Program. The COMMON screen is shown below as an example:

NOTE

- Refer to the user's manual of the instrument for detailed description of all parameters.

- In order to load the Programs, saved on a computer or iPad, directly on the instrument, the .L7P files generated by

the Editor must be copied (or saved directly) in a "Legend'70s \ Program" folder (to be created if not already

present) on the USB stick for a later use with the instrument's Load Program function.

Click the SAVE button to save the current Program

to your computer or iPad.

Click the LOAD button to load a Program saved on

your computer or iPad into the instrument.

Program selection area.

Click in this area to open the drop-

down menu to select the Program

you have to modify.

Click this button to store on the

instrument the Program with the

changes made.

Click these boxes to view the relevant

sections of the current Program,

corresponding to the sections in the EDIT

menu of the instrument.

Display area of all the parameters available in the

Program section selected with the buttons on the left.

The names and function of the parameters are the same

as those in the EDIT menu sections of the instrument.

User Guide

Legend 70's Editor

File transfer between computer and iPad

It is possible to transfer .L7P files (i.e. the Programs saved through the SAVE command described in the

chapter "Program Section") from a computer to an iPad and vice versa.

To do this, you first need to install the iTunes application on your computer, which can be downloaded from

www.apple.com.

After installing the application, follow this procedure to transfer the files:

1. Connect the iPad to the computer using the cable supplied with the device and also used to connect the

charger.

2. Wait for iTunes to start on your computer.

3. Click on the button shown in the figure:

4. In the bar on the left click on "File sharing".

User Guide

Legend 70's Editor

5. In the "App" window click on "Legend '70s".

6. The "Legend '70s Documents" window displays the files currently stored on the iPad and used by the

Legend 70's Editor.

7. To transfer a file from computer to iPad click on "Add file".

User Guide

Legend 70's Editor

A window appears where you can select the file on your computer that you want to transfer to your iPad.

8. To transfer a file from iPad to computer, select it in the "Legend '70s Documents" window and click

"Save".

A window appears where you can select the folder on the computer in which you want to transfer the file

from your iPad.

User Guide

Legend 70's Editor

TIMBRE SECTION

The Timbre section of the Legend '70s Editor allows you to customize the timbres available in the E.Piano, Clavi

and A.Piano modules of the Legend '70s, providing several parameters not directly accessible on the

instrument, but only adjustable by the editor. The generation parameters available are strictly related to the type

of timbre selected.

Click on the TIMBRE button in the top menu of the Legend 70's Editor to display the TIMBRE area screen for

one of the available modules. Below is an example showing the E.PIANO screen, relative to the parameters of

the E.Piano module:

The adjustment parameters refer to the timbre of the module. This means that you can adjust them differently for

each position of the timbre selector switch, but they remain so for all instrument programs.

The adjustment parameters remain active in the instrument until it is switched off even without clicking the STORE

button. To make them definitive and available even after the instrument is switched off, click on the STORE button.

Module timbre selection area.

Click in this area to open the drop-down

menu with which you can select the

timbre you want to modify.

Click this button to store on the

instrument the timbre with the

changes made.

Click on these boxes to display the

timbre parameters screen for the

selected module.

Display area of all parameters available for the screen

selected with the buttons on the left.

The function of the parameters is described below.

User Guide

Legend 70's Editor

Parameters of the E.PIANO Timbre

E.Piano Model: selection of electric piano model. The available models depend on the selected electric

piano timbre (Rhod, Wurli, E.Grand).

Stretch Tuning: pitch curve along the keyboard extension. With a value of 0 the keyboard is in tune as in

the original instrument, then slightly lowered in the low end of the keyboard and slightly raised in the high

end. With positive values this effect is increased, while with negative values the pitch is attenuated.

Hammer: modifies the characteristics and dimensions of the hammer which, during impact with the tine,

determines the intensity and timbre of the sound. With positive values you increase the size of the hammer

that transfers larger energy to the tine and a richer sound produced, especially when playing at high

dynamics. Negative values decrease the size of the hammer, making the sound lighter.

Tine Position (Rhod): adjusts the position of the tine with respect to the pickup to control the harmonic

content of the sound. At negative values, the tine is closer to the pickup and the sound has more harmonic

content. At positive values, the tine is moved away from the pickup and the sound is more muted.

Tone Bar Decay (Rhod): adjusts the size of the tone bar and consequently the decay time of the sound.

Tone Bar Res. (Rhod): determines the body of the tone bar that affects the initial "bell" character of the

sound. With positive values the sound becomes very bright with exaltation of the "bell" component, while

with negative values it is more muted.

Reed Position (Wurli): adjusts the position of the reed allowing you to change the harmonic content of the

sound. At negative values the reed is closer to the pickup and the sound has a higher harmonic content. At

positive values, the reed is moved away from the pickup and the sound is more muted.

Reed Decay (Wurli): adjusts the reed size and consequently the decay time of the sound.

Reed Decay (E.Grand): adjusts the decay time of the sound.

Release Noise: adjusts the audio level of the noise generated by the dampers when the keyboard keys are

released.

Pedal Noise: adjusts the audio level of the noise generated by the Sustain pedal when pressed.

Natural Ribattuto (Rhod and Wurli): when playing in ribattuto the hammer does not always hit the tine or

the reed in the same position, as this still vibrates because of the previous percussions and this determines

that the notes rebated always have a differing timbre. With this parameter you can enhance or attenuate

this behavior.

Damper Res. (E.Grand): adjusts the amount of resonance of the strings while the Sustain pedal is pressed

and some strings are resonating in sympathy.

CLAVI timbre parameters

Clavi Model: Clavinet model selection.

Stretch Tuning: pitch curve along the keyboard extension. With a value of 0 the keyboard is in tune as in

the original instrument, then slightly lowered in the low end of the keyboard and slightly raised in the high

end. With positive values this effect is increased, while with negative values the pitch is attenuated.

Hammer: defines the characteristics of the hammer (tangent), thus modifying the intensity and timbre of the

sound. With positive values you increase the size of the Tangent that the larger it is, the more energy is

transferred to the pickup and the richer the sound produced. Negative values decrease the size of the

tangent, making the sound more muted.

Release Noise: adjusts the audio level of the noise generated by the wool damper when the keyboard keys

are released.

Pickup Position: sets the position of the pickup on which the sound character depends. With positive

values the pickup approaches the bridge, to the end of the string where the timbre is brighter, while with

negative values it is positioned toward the center of the string, and the sound becomes softer and more

muted.

Dynamic: adjusts the sensitivity to the force on the keys. With positive values the instrument is more

sensitive and you can reach the level and timbre of the signal normally generated by playing at high

dynamics even if you exert little force on the keys of the keyboard.

User Guide

Legend 70's Editor

Parameters of A.PIANO timbres

A.Piano Model: selection of the acoustic piano model.

Stretch Tuning: pitch curve along the keyboard extension. With a value of 0 the keyboard is in tune as in

the original instrument, then slightly lowered in the low end of the keyboard and slightly raised in the high

end. With positive values this effect is increased, while with negative values the pitch is attenuated.

Release Time: adjusts the decay time of the sound once a key is released.

Release Noise: adjusts the audio level of the noise generated by the dampers when the keys are released.

Pedal Noise: adjusts the audio level of the noise generated by the Sustain pedal.

Damper Res. adjusts the amount of strings resonance while using the Sustain pedal.

Layer Level (only dual-sound timbre, e.g. Piano&Choir): volume balance between the two timbres.

Selection of new models

Whenever Viscount releases new models for the E.Piano, Clavi or A.Piano modules, these can be listened to

and evaluated using the E.Piano Model, Clavi Model or A.Piano Model parameter and associated with one of

the positions of the Timbre selector. To select the new model, simply open the drop-down menu of this

parameter as shown in the following example screen:

By selecting one of the model in the drop-down menu, it is placed in the currently selected position of the timbre

selector as indicated in the timbre selection area. By clicking on the STORE button, the selected model is

permanently inserted in this position

Module timbre

selection area.

Drop-down menu for

model selection

La pagina sta caricando ...

Viscount Legend ‘70s Editor Manuale del proprietario

Questo manuale è adatto anche per

Viscount Legend ‘70s Editor Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti