Datalogic Megallan 2300HS? Quick Reference Manual

Categoria
Lettori di codici a barre
Tipo
Quick Reference Manual

Questo manuale è adatto anche per

Magellan
®
2300HS/2300HSΩ
Quick Reference Guide
Datalogic Scanning, Inc.
959 Terry Street
Eugene, Oregon 97402
Telephone: (541) 683-5700
Fax: (541) 345-7140
An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be repro-
duced or transmitted in any form or by any means without prior written permission of Datalogic Scanning, Inc. or its subsidiaries or affiliates
("Datalogic" or “Datalogic Scanning”). Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and
transmit this documentation for the purchaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices,
including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative. Electronic
versions may either be downloadable from the Datalogic website (www.scanning.datalogic.com) or provided on appropriate media. If you visit
our website and would like to make comments or suggestions about this or other Datalogic publications, please let us know via the "Contact Dat-
alogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic reserves the
right to change any specification at any time without prior notice.
Datalogic is a registered trademark of Datalogic S.p.A. and the Datalogic logo is a trademark of Datalogic S.p.A. all licensed to Datalogic Scan-
ning, Inc. All other trademarks and trade names referred to herein are property of their respective owners.
Magellan, FirstStrike and SurroundScan are registered trademarks of Datalogic Scanning, Inc. All-
Weighs, OmegaTek, Produce Rail, Productivity Index Reporting, SmartSentry and Any-Weighs are all
trademarks of Datalogic Scanning, Inc.
This product may be covered by one or more of the following patents: 4603262 • 4639606 • 4652750 • 4672215 • 4699447 • 4709369 • 4749879
• 4786798 • 4792666 • 4794240 • 4798943 • 4799164 • 4820911 • 4845349 • 4861972 • 4861973 • 4866257 • 4868836 • 4879456 • 4939355 •
4939356 • 4943127 • 4963719 • 4971176 • 4971177 • 4991692 • 5001406 • 5015831 • 5019697 • 5019698 • 5086879 • 5115120 • 5144118
5146463 • 5179270 • 5198649 • 5200597 • 5202784 • 5208449 • 5210397 • 5212371 • 5212372 • 5214270 • 5229590 • 5231293 • 5232185
5233169 • 5235168 • 5237161 • 5237162 • 5239165 • 5247161 • 5256864 • 5258604 • 5258699 • 5260554 • 5274219 • 5296689 • 5298728
5311000 • 5327451 • 5329103 • 5330370 • 5347113 • 5347121 • 5371361 • 5382783 • 5386105 • 5389917 • 5410108 • 5420410 • 5422472
5426507 • 5438187 • 5440110 • 5440111 • 5446271 • 5446749 • 5448050 • 5463211 • 5475206 • 5475207 • 5479011 • 5481098 • 5491328
5493108 • 5504350 • 5508505 • 5512740 • 5541397 • 5552593 • 5557095 • 5563402 • 5565668 • 5576531 • 5581707 • 5594231 • 5594441
5598070 • 5602376 • 5608201 • 5608399 • 5612529 • 5629510 • 5635699 • 5641958 • 5646391 • 5661435 • 5664231 • 5666045 • 5671374
5675138 • 5682028 • 5686716 • 5696370 • 5703347 • 5705802 • 5714750 • 5717194 • 5723852 • 5750976 • 5767502 • 5770847 • 5786581
5786585 • 5787103 • 5789732 • 5796222 • 5804809 • 5814803 • 5814804 • 5821721 • 5822343 • 5825009 • 5834708 • 5834750 • 5837983
5837988 • 5852286 • 5864129 • 5869827 • 5874722 • 5883370 • 5905249 • 5907147 • 5923023 • 5925868 • 5929421 • 5945670 • 5959284
5962838 • 5979769 • 6000619 • 6006991 • 6012639 • 6016135 • 6024284 • 6041374 • 6042012 • 6045044 • 6047889 • 6047894 • 6056198
6065676 • 6069696 • 6073849 • 6073851 • 6094288 • 6112993 • 6129279 • 6129282 • 6134039 • 6142376 • 6152368 • 6152372 • 6155488
6166375 • 6169614 • 6173894 • 6176429 • 6188500 • 6189784 • 6213397 • 6223986 • 6230975 • 6230976 • 6237852 • 6244510 • 6259545
6260763 • 6266175 • 6273336 • 6276605 • 6279829 • 6290134 • 6290135 • 6293467 • 6303927 • 6311895 • 6318634 • 6328216 • 6332576
6332577 • 6343741 • 6454168 • 6478224 • 6568598 • 6578765 • 6705527 • 6974084 • 6991169 •7051940 • AU703547 • D312631 • D313590
D320011 • D320012 • D323492 • D330707 • D330708 • D349109 • D350127 • D350735 • D351149 • D351150 • D352936 • D352937 • D352938
• D352939 • D358588 • D361565 • D372234 • D374630 • D374869 • D375493 • D376357 • D377345 • D377346 • D377347 • D377348 •
D388075 • D446524 • EP0256296 • EP0260155 • EP0260156 • EP0295936 • EP0325469 • EP0349770 • EP0368254 • EP0442215 •
EP0498366 • EP0531645 • EP0663643 • EP0698251 • GB2252333 • GB2284086 • GB2301691 • GB2304954 • GB2307093 • GB2308267 •
GB2308678 • GB2319103 • GB2333163 • GB2343079 • GB2344486 • GB2345568 • GB2354340 • ISR107546 • ISR118507 • ISR118508 •
JP1962823 • JP1971216 • JP2513442 • JP2732459 • JP2829331 • JP2953593 • JP2964278 • MEX185552 • MEX187245 • RE37166 • Other
Patents Pending
Quick Reference Guide i
DATALOGIC SCANNING, INC. MAGELLAN
®
END USER LICENSE
AGREEMENT
Notice to End User: The Datalogic Product you have acquired contains embedded Software, which is integral to the product's operation. This
Software is being provided to you under license, subject to the terms and conditions of this Agreement. If you use the Datalogic Product, you will
be deemed to have accepted the terms and conditions of this Agreement. If you do not intend to be bound to the terms of this Agreement, Data-
logic is not willing to license the Software to you, you may not use the Datalogic Product or the Software, and you must contact the party from
whom you acquired the Datalogic Product for instructions.
This End User Software License Agreement ("Agreement") is a legally binding agreement governing the licensing of the Software and Documentation by Dat-
alogic,Scanning Holdings, Inc. and its subsidiaries and affiliates ("Datalogic") to the entity or person who has purchased or otherwise acquired a Datalogic
Product ("End User"). For purposes of this Agreement, any software that is associated with a separate end-user license agreement is licensed to you under
the terms of that license agreement. Datalogic and End User hereby agree as follows:
1. Definitions.
1.1 "Documentation" means materials such as user's guides, program reference guides, quick reference guides, manuals, or similar materials associated
with or related to the Datalogic Product, whether in printed, "online", or other form.
1.2 "Proprietary Information" means: (a) source code, object code, software, documentation, and any related internal design, system design, data base
design, algorithms, technology, technical data or information, implementation techniques, and trade secrets related to the Software, (b) any other trade
secrets marked appropriately or identified as proprietary or confidential, and (c) any information that End User, under the circumstances, should recog-
nize as confidential. Proprietary Information does not include any information that the receiving party can establish was (1) in the public domain, (2)
already in the receiving party's possession or rightfully known prior to receipt, (3) rightfully learned from a third party not in violation of any other's pro-
prietary rights, or (4) independently developed without access to Proprietary Information.
1.3 "Datalogic Product" means the Datalogic Magellan® 1000i series, Magellan® 1400i series, Magellan® 8100 series, Magellan® 8200 series, Magel-
lan® 8300 series, Magellan® 8400 series, Magellan® 8500 series, Magellan® 9500 series, and/or Magellan SL® series scanner and/or scanner/scale
product, including all embedded Software in and all Documentation related to such product, which has been purchased or otherwise acquired by End
User, whether obtained directly or indirectly from Datalogic.
1.4 "Software" means any software or computer programs of Datalogic or its third party licensors in machine readable form which is embedded in the Dat-
alogic Product, whether obtained directly or indirectly from Datalogic, including any replacement, update, upgrade, enhancement or modification.
2. Scope Of License Granted.
2.1 Datalogic grants to End User a non-exclusive, non-transferable, perpetual license to use the Software, solely on the Datalogic Product in which it is
embedded ("designated Datalogic Product"), in machine-readable form only, solely for End User's internal business purposes. This Agreement does
not convey ownership of the Software to End User. Title to the Software shall be and remain with Datalogic or the third party from whom Datalogic has
obtained a licensed right. As used in this Agreement, the term "purchase" or its equivalents when applied to the Software shall mean "acquire under
license." End User is not entitled to receipt or use of the source code to any Software.
2.2 End User shall not copy, modify, decompile, disassemble, reverse engineer, or otherwise reproduce or remanufacture the Software, whether modified
or unmodified, nor sell, assign, sublicense, distribute, lend, rent, give, or otherwise transfer the Software to any other person or organization, for pur-
poses other than as expressly provided in this Agreement, without Datalogic's prior written consent.
3. Transfers, Support.
3.1 Any copying, installing, reproduction, remanufacture, reverse engineering, electronic transfer, or other use of the Software on other than the desig-
nated Datalogic Product will be a material breach of this Agreement. However, Datalogic may elect not to terminate this Agreement or the granted
licenses, but instead may elect to notify End User that End User is deemed to have ordered and accepted a license for each breaching use. End User
shall pay Datalogic the applicable list price for such licenses as of the date of such breach.
3.2 End User shall not sell, assign, sublicense, distribute, lend, rent, give, or otherwise transfer the Datalogic Product to any third party unless such third
party agrees with Datalogic in writing to be bound by the terms and conditions of this Agreement. Any such transfer of the Datalogic Product absent
such agreement shall be null and void.
3.3 End User may obtain support for Software from Datalogic at Datalogic's standard support fees and under Datalogic's standard support terms and con-
ditions in effect at the time the support is requested.
4. Intellectual Property.
End User acknowledges that the Software constitutes valuable trade secrets of Datalogic or Datalogic's third party licensors and that the Software is pro-
tected by intellectual property laws and treaties. The license set forth in this Agreement does not transfer to End User any ownership of Datalogic's or its third
party licensors' copyrights, patents, trademarks, service marks, trade secrets, or other intellectual property rights and End User shall have no right to com-
mence any legal actions to obtain such rights. End User shall not remove, modify, or take any other action that would obscure any copyright, trademark,
patent marking, or other intellectual property notices contained in or on the Datalogic Product.
5. Proprietary Information.
5.1 End User acknowledges that Proprietary Information is the confidential, proprietary, and trade secret property of Datalogic and Datalogic's third party
licensors and End User acquires no right or interest in any Proprietary Information.
5.2 End User shall not disclose, provide, or otherwise make available the Proprietary Information of Datalogic or its third party licensors to any person
other than End User's authorized employees or agents who are under confidentiality agreement, and End User shall not use the Proprietary Informa-
tion other than in conjunction with use of the Datalogic Product exclusively for End User's internal business purposes. End User shall take steps to
protect the Proprietary Information no less securely than if it were End User's own intellectual property.
5.3 The provisions of this Proprietary Information Section shall survive and continue for five (5) years after the termination of this Agreement.
6. Limited Warranty.
6.1 Datalogic warrants that, under normal use and operation, the Datalogic Product will conform substantially to the applicable Documentation for the
period specified in the Documentation. During this period, for all reproducible nonconformities for which Datalogic has been given written notice, Data-
logic will use commercially reasonable efforts to remedy nonconformities verified by Datalogic. End User agrees to supply Datalogic with all reasonably
ii Magellan
®
2300HS/2300HSΩ
requested information and assistance necessary to help Datalogic in remedying such nonconformities. For all defects reported to Datalogic within the
warranty period, Datalogic's liability is limited to providing End User with one copy of corrections or responding to End User's problem reports accord-
ing to Datalogic's standard assistance practices. Datalogic does not warrant that the product will meet End User's requirements or that use of the prod-
uct will be uninterrupted or error free, or that Datalogic's remedial efforts will correct any nonconformance. This limited warranty does not cover any
product that has been subjected to damage or abuse, whether intentionally, accidentally, or by neglect, or to unauthorized repair or unauthorized instal-
lation, and shall be void if End User modifies the product, uses the product in any manner other than as established in the Documentation, or if End
User breaches any of the provisions of this Agreement.
6.2 EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DATALOGIC PRODUCT IS PROVIDED "AS IS" AND DATALOGIC MAKES NO WARRANTIES
OF ANY KIND, EXPRESS OR IMPLIED, WRITTEN OR ORAL, WITH RESPECT TO THE PRODUCT, AND SPECIFICALLY DISCLAIMS THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
7. Infringement.
7.1 Datalogic will defend End User against any claim in a lawsuit that the Datalogic Product furnished hereunder infringe a United States patent or copy-
right of a third party and Datalogic will pay any damages finally awarded against End User by a court of competent jurisdiction that are attributable to
such claim or will pay End User's part of any settlement that is attributable to such claim, provided, that 1) End User notifies Datalogic promptly in writ-
ing of the claim, 2) Datalogic controls the defense or settlement of the claim, and 3) End User cooperates fully with Datalogic in such defense or settle-
ment. All notices of a claim should be sent to Datalogic Scanning Holdings, Inc., Legal Department, 959 Terry Street, Eugene, OR 97402.
7.2 In the defense or settlement of any such claim, Datalogic may, at its option, 1) procure for End User the right to continue using the Datalogic Product,
2) modify the Datalogic Product so that it becomes non-infringing, 3) replace the Datalogic Product with an equivalent product not subject to such
claim, or 4) provide End User an opportunity to return the Datalogic Product and receive a refund of the purchase price paid, less a reasonable allow-
ance for use.
7.3 Datalogic shall have no liability to End User for claims of infringement based upon 1) the use of any Datalogic Product in combination with any product
which Datalogic has not either furnished or authorized for use with such Datalogic Product 2) the use of any Datalogic Product designed, manufac-
tured, or modified to the specifications of End User, or 3) End User's modification of the Datalogic Product without written authorization from Datalogic.
7.4 THE FOREGOING STATES DATALOGIC'S COMPLETE AND ENTIRE OBLIGATION CONCERNING CLAIMS OF PATENT, COPYRIGHT, OR OTHER
INTELLECTUAL PROPERTY INFRINGEMENT, CANCELS AND SUPERSEDES ANY PRIOR AGREEMENTS, WHETHER ORAL OR WRITTEN,
BETWEEN THE PARTIES CONCERNING SUCH CLAIMS, AND WILL NOT BE MODIFIED OR AMENDED BY ANY PAST, CONTEMPORANEOUS,
OR FUTURE AGREEMENTS OR DEALINGS BETWEEN THE PARTIES, WHETHER ORAL OR WRITTEN, EXCEPT AS SET FORTH IN A FUTURE
WRITING SIGNED BY BOTH PARTIES.
8. Limitation Of Liability.
EXCEPT AS PROVIDED IN SECTION 7, DATALOGIC SHALL NOT BE LIABLE FOR ANY CLAIMS AGAINST END USER BY ANY OTHER PARTY. IN NO
EVENT SHALL DATALOGIC'S LIABILITY FOR DAMAGES, IF ANY, WHETHER BASED UPON CONTRACT, TORT (INCLUDING NEGLIGENCE), PROD-
UCT LIABILITY, STRICT LIABILITY, WARRANTY, OR ANY OTHER BASIS, EXCEED THE PRICE OR FEE PAID BY END USER FOR THE DATALOGIC
PRODUCT. UNDER NO CIRCUMSTANCES SHALL DATALOGIC BE LIABLE TO END USER OR ANY THIRD PARTY FOR LOST PROFITS, LOST DATA,
INTERRUPTION OF BUSINESS OR SERVICE, OR FOR ANY OTHER SPECIAL, CONSEQUENTIAL, CONTINGENT, INDIRECT, INCIDENTAL, PUNITIVE,
EXEMPLARY, OR OTHER SIMILAR DAMAGES, EVEN IF DATALOGIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
9. Government Restricted Rights; International Use.
9.1 Use, duplication, or disclosure of the Software by the U.S. Government is subject to the restrictions for computer software developed at private
expense as set forth in the U.S. Federal Acquisition Regulations at FAR 52.227-14(g), or 52.227-19 or in the Rights in Technical Data and Computer
Software clause at DFARS 252.227-7013(c)(1)(ii), whichever is applicable.
9.2 If End User is using the Datalogic Product outside of the United States, End User must comply with the applicable local laws of the country in which the
Datalogic Product is used, with U.S. export control laws, and with the English language version of this Agreement. The provisions of the "United
Nations Convention on International Sale of Goods" shall not apply to this Agreement.
10. Termination.
10.1 Either party may terminate this Agreement or any license granted under this Agreement at any time upon written notice if the other party breaches any
provision of this Agreement.
10.2 Upon termination of this Agreement, End User immediately shall cease using any non-embedded software and shall return to Datalogic or destroy all
non-embedded software covered by this Agreement, and shall furnish Datalogic with a certificate of compliance with this provision signed by an officer
or authorized representative of End User. For embedded software, End User agrees to sign a waiver prepared by Datalogic concerning further use of
the embedded Software. End User's resumed or continued use of the embedded Software after termination shall constitute End User's agreement to
be bound by the terms and conditions of this Agreement for such use.
11. General Provisions.
11.1 Entire Agreement; Amendment
. This document contains the entire agreement between the parties relating to the licensing of the Software and super-
sedes all prior or contemporaneous agreements, written or oral, between the parties concerning the licensing of the Software. This Agreement may not
be changed, amended, or modified except by written document signed by Datalogic.
11.2 Notice
. All notices required or authorized under this Agreement shall be given in writing, and shall be effective when received, with evidence of receipt.
Notices to Datalogic shall be sent to the attention of Contract Administration, Datalogic Scanning Holdings, Inc., 959 Terry Street, Eugene, OR 97402,
or such other address as may be specified by Datalogic in writing.
11.3 Waiver. A party's failure to enforce any of the terms and conditions of this Agreement shall not prevent the party's later enforcement of such terms and
conditions.
11.4 Governing Law; Venue: This Agreement and the rights of the parties hereunder shall be governed by and construed in accordance with the laws of the
State of Oregon U.S.A, without regard to the rules governing conflicts of law. The state or federal courts of the State of Oregon located in either Mult-
nomah or Lane counties shall have exclusive jurisdiction over all matters regarding this Agreement, except that Datalogic shall have the right, at its
absolute discretion, to initiate proceedings in the courts of any other state, country, or territory in which End User resides, or in which any of End User's
assets are located.
11.5 Attorneys’ Fees. In the event an action is brought to enforce the terms and conditions of this Agreement, the prevailing party shall be entitled to reason-
able attorneys' fees, both at trial and on appeal.
- END -
Quick Reference Guide iii
CONTENTS
English .......................................................................................................................................1
Francais .....................................................................................................................................5
Deutsch ......................................................................................................................................9
Italiano .....................................................................................................................................13
Español ....................................................................................................................................17
Portugues ................................................................................................................................21
Chinese ....................................................................................................................................25
Appendix A — Product Labeling ...........................................................................................29
Appendix B — Productivity Index Reporting Option ..........................................................30
Appendix C — Laser Safety ...................................................................................................32
Appendix D — Warranty .........................................................................................................38
iv Magellan
®
8500/8500
Ω
NOTES
Quick Reference Guide 1
Quick Reference Guide
Introduction
This guide offers a summary of basic scanner operation for first time users. Install-
ers, system managers and other technical personnel can find installation, program-
ming and further advanced information in the Product Reference Guide. Up-to-
date revisions of publications can be viewed, printed and downloaded from the
website listed on the back cover of this manual. Printed manuals can also be
ordered from your dealer/distributor.
Connection
For your convenience, Figure 1 shows scanner connections and their functions.
Figure 1. Connections
POS TERMINAL AUXILIARY PORT POWER
Connection to this port is Optional
· DC Brick Input· Label Data
· Application Download
(where appropriate)
· Test Port
· On Screen
Programming (OSP)
· Application Download
· RS-232 Handheld Scanner Input
· Auxiliary RS-232 Label Data Output
EAS Connection
Connection to this port is Optional
· Electronic Article Surveillance
Connection
Power
EAS Opening
Aux. PortScanner Host
2 Magellan
®
2300HS/2300HSΩ
Operation
Scanning Items
The scanner is mounted so its scan window is flush with the countertop. This
allows for maximum working space, and also permits the user to slide items over its
surface without having to grasp or pick them up. Bar codes are effortlessly scanned
when swept through the zone projected from the substantial scan window as
shown in
Figure 2a.
With FirstStrike
TM
decoding software, the scanner can read most hard-to-read
codes quickly and without excess orientation.
Figure 2. Operating the Scanner
NOTE
Facing bar code labels in the direction of scanning, or toward the scan
window will optimize the scan rate. The arrow on the scanner’s top
cover indicates the direction scanned items should be moved (see
Figure 2b).
S
canne
r
Item
Bar
Code
Items are
pushed or
slid past
scanner
Pr
oduct
Flow
Scan Volume
G
reen LE
D
Volume
/
Tone Push Butto
n
a
c
b
d
Quick Reference Guide 3
Volume/Tone Push Button
The Volume/Tone Push Button (Figure 2d — accessed by removing the Top
Cover
Figure 2c) also performs multiple functions depending upon the duration
of time it is pressed:
NOTE
Volume changes made using the Volume/Tone Push Button are lost
when the scanner is powered-down and are reset to the configured set-
ting. If you wish to permanently change the volume, use the special
programming labels in the Product Reference Guide.
Table 1. Volume/Tone Push Button Functions
PRESS
DURATION
FUNCTION COMMENT
Momentary (when
scanner is asleep)
Wakes scanner from Sleep
Mode
Alternatively, the scanner can be awakened by:
- Moving an object through the scan zone.
- Scanning with an attached auxiliary scanner.
Momentary (when
scanner is awake)
Increments volume
Press the push button momentarily to increase speaker vol-
ume. When the loudest volume is reached, a repeated press
of the push button cycles volume back to the lowest setting,
then volume increases on subsequent press(es). Four volume
levels are available.
Hold, then release
when the beeper
sounds
Increments tone
Press the push button for approximately 2 seconds, then
release. Each time this is done, the beeper will sound at one
of three tones. Stop when the desired tone (high, medium or
low) is sounded.
4 Seconds
Scanner Diagnostics Mode
a
This mode allows system support personnel to troubleshoot
problems with the scanner and is used to determine if it can
read bar codes. Press the button for eight seconds or cycle
power to exit Scanner Diagnostics Mode and reset the scan-
ner.
8 Seconds
Resets Scanner
b
Only system support personnel should perform a reset.
a. By standard default, this function is normally disabled to prevent accidental activation by users.
b. Users should not perform scanner resets except under the direction of trained systems support person-
nel.
4 Magellan
®
2300HS/2300HSΩ
Green LED Indicator
The green LED (Figure 2d) indicates scanner status as shown in the table below.
Table 2. Green LED Indications
LED
INDICATION
DURATION COMMENT
Scanner Active
a
(Normal Mode)
Scanner (Green) LED on steady and dim
The scanner is ready for operation. Scanning is immedi-
ately available.
Good Read Indi-
cation
a
Scanner (Green) LED - bright flash
Indicates a bar code has been read and decoded.
Program Mode
Indication
Scanner (Green) LED - Continuous flash-
ing
Indicates the scanner is in Label Programming Mode.
Cycle power to exit Programming Mode.
Sleep Mode Indi-
cation
Scanner (Green) LED flashes slowly
The scanner motor and/or laser have automatically
switched off and the unit has entered Sleep Mode due
to extended inactivity.
Host Disabled
Scanner (Green) LED 1-second off, 1/10-
second on
Host has disabled scanning.
Field Replace-
able Unit (FRU)
Warning (Error
Mode)
Audible low tone 1 second. LED flashes
continuously.
Serves notice that a fatal FRU failure has been
detected. Call systems support for service.
FRU Indication
Scanner (Green) LED flashes a coded
sequence in concert with the speaker.
Occurs ONLY upon Volume/Tone button push following
a FRU warning. Enables service technicians to identify
FRU failures.
a. Certain functions of the LED are selectable to be enabled or disabled. Your scanner may not be pro-
grammed to display all indications.
Quick Reference Guide 5
Introduction
Ce guide présente une synthèse du fonctionnement de base du scanner à l'atten-
tion des utilisateurs novices. Les installateurs, les administrateurs de système et
autres personnels techniques pourront obtenir des informations sur l'installation,
la programmation ainsi que d'autres indications plus avancées dans le Guide de
référence du produit. Il est possible de consulter, d'imprimer et télécharger des
mises à jour des publications à partir du site de Datalogic à l'adresse reportée sur la
couverture postérieure de ce manuel. Il est également possible de commander des
manuels imprimés auprès de votre vendeur/distributeur.
Raccordement
Pour vous aider, consulter la Figure 3 qui illustre les raccordements et les fonctions
du scanner
Figure 3. Raccordement
Port auxiliaire Alimentation
Le raccordement à ce port est
facultatif
· Entrée Brick CC
· Données étiquette
· Téléchargement de
l'application (le cas
échéant)
· Port d'essai
· Affichage de la programmation (OSP)
· Téléchargement de l'application
· Entrée scanner à main RS-232
· Sortie auxiliaire RS-232 données
étiquette
Raccordement EAS
Le raccordement à ce port est
facultatif
· Système de surveillance
électronique d'articles (EAS)
Raccordement
Power
EAS Opening
Aux. PortScanner Host
Terminal
d'encaissement (POS)
6 Magellan
®
2300HS/2300HSΩ
Fonctionnement
Lecture d’articles
Le scanner est installé de manière à positionner sa fenêtre de lecture au même
niveau que le comptoir. Cette procédure permet d'obtenir un espace de travail
maximum et permet à l'utilisateur de faire glisser les articles sur la surface sans
devoir les saisir ou les soulever. Les codes à barres sont numérisés sans aucun effort
lorsqu'ils sont passés à travers la zone projetée à partir de la grande fenêtre de lec-
ture illustrée à la
Figure 4a.
Grâce au logiciel de décodage FirstStrike™, le scanner peut capturer rapidement et
avec une orientation minime la plupart des codes de lecture difficile.
Figure 4. Mode de lecture " Transfert " et " Présentation "
NOTA
La position en face des étiquettes des codes à barres dans la direction
de lecture ou face à la fenêtre de lecture optimisera le taux de lectures
réussies. La flèche présente sur le couvercle supérieur du scanner
indique la direction de déplacement à suivre pour numériser les arti-
cles (voir Figure 4b).
S
canne
r
C
irculatio
n
des produits
V
Volume
de lecture
vo
y
ant DEL ver
t
Bouton-
p
oussoir volume/tonali
t
é
a
c
b
d
Code
à barres
de l'article
Les articles
sont poussés
ou glissés
devant le
scanner
Quick Reference Guide 7
Bouton-poussoir volume/tonalité
Le bouton-poussoir volume/tonalité exécute également des fonctions
multiples selon la durée de son activation :
NOTA
Les changements de volume rendent l'utilisation du Bouton de réglage
du Volume/Tonalité difficile lorsque le scanner est hors tension et est
réinitiliasé au paramètre configuré. Si vous désirez changer définitive-
ment le volume, utilisez les étiquettes spéciales de programmation
dans le Guide de référence du produit.
Tableau 3. Fonctions du bouton-poussoir Volume/tonalité
DURÉE
D'ACTIVATION
FONCTION COMMENTAIRE
Momentané (lorsque
le scanner est en
mode de veille)
Réveille le scanner du mode de
veille
En alternative, le scanner peut être réveillé par :
- déplacement d'un objet à travers la zone de balayage.
- un changement de poids sur la balance.
- Lecture avec un scanner auxiliaire attaché
Momentané (lorsque
le scanner est en
mode d'éveil)
Augmente le volume
Pressez le bouton-poussoir momentanément pour augmenter
le volume du haut-parleur. Après avoir atteint le volume le
plus élevé, une pression répétée du bouton-poussoir reporte
progressivement le volume au niveau le plus bas, le volume
augmente ensuite en fonction des pressions successives.
Cinq niveaux de volume sont disponibles.
Maintenez la touche
enfoncée et relâchez-
la lorsque l'avertis-
seur sonore retentit
Augmente la tonalité
Pressez le bouton-poussoir pendant approximativement 2
secondes, puis relâchez. A chaque pression, l'avertisseur
retentira selon une des trois tonalités. Arrêtez lorsque la
tonalité désirée (élevée, moyenne ou faible) est obtenue.
4 secondes
Mode de diagnostic du scan-
ner
a
Ce mode permet au personnel chargé de l'assistance du
système de remédier aux problèmes du scanner. Les diag-
nostics sont généralement lancés après la notification d'une
alarme du module interchangeable (voir Tableau 1).
Débranchez et rebranchez l'alimentation pour sortir du mode
diagnostic.
8 secondes
Remet le scanner à l'état initia
b
Seul le personnel chargé de l'assistance du système est
autorisé à exécuter la remise à l'état initial.
a. Par défaut, cette fonction est neutralisée pour empêcher l'activation accidentelle par des utilisateurs.
b. Les utilisateurs ne devraient pas procéder à la remise à l'état initial du scanner sauf sous la direction de
personnel agréé chargé de l'assistance des systèmes.
8 Magellan
®
2300HS/2300HSΩ
Fonctions des voyant DEL Vert
Le voyant DEL vert (Figure 4d) indique l'état du scanner au Tableau 4 ci-des-
sous.
Tableau 4. Green LED Indications
LED
INDICATION
DURATION COMMENT
Scanner Actif
a
(Mode normal)
Voyant DEL vert en mode veille fixe
Le scanner est prêt à fonctionner. Le balayage est
immédiatement disponible.
Lecture correcte
de l'indication
a
Voyant DEL vert - clignotement lumineux
Indique la lecture et le décodage du code à barres.
Indication du
mode programme
Voyant DEL vert - Clignotement continu
Indique que le scanner est en mode de programmation
Étiquette. Débranchez et rebranchez l'alimentation pour
sortir du mode de programmation.
Indication du
mode de veille
Le voyant DEL vert clignote lentement
Le moteur du scanner et/ou le laser sont mis automa-
tiquement hors tension et l'unité passe en mode de
veille à cause de l'inactivité prolongée.
Système invalide
1 seconde éteint, 1/10è de seconde
allumé
Système invalide scanner.
Alarme de mod-
ule interchange-
able(Mode
d'erreur)
Signal sonore bas 1 seconde. Voyant DEL
vert/jaune alternatif clignote de manière
continue.
Indique qu'une erreur fatale du module interchangeable
a été détectée.
Indication de
module inter-
changeable
Le voyant DEL vert clignote selon une
séquence codée en combinaison avec le
haut-parleur.
UNIQUEMENT au cas où le bouton Volume/tonalité
serait activé suite à une alarme d’un module inter-
changeable. Ceci permet aux techniciens d'identifier les
défaillances du module interchangeable.
a. Il est possible de sélectionner certaines fonctions des voyants DEL vert et jaune afin de les activer ou
désactiver. Il n'est pas possible de programmer votre scanner pour afficher toutes les indications.
Quick Reference Guide 9
Einleitung
Diese Anleitung bietet eine Zusammenfassung der grundlegenden Scanner-Bedie-
nung für neue Benutzer. Systemmanager, Installations- und anderes technisches
Personal finden Informationen zu Installation, Programmierung und weitere Ang-
aben im Produktreferenzhandbuch. Aktuelle Änderungen der Publikationen fin-
den Sie auf der Datalogic-Homepage; diese können Sie drucken und
herunterladen. Die Internet-Adresse finden Sie auf der Rückseite dieses Hand-
buchs. Gedruckte Handbücher können Sie auch bei Ihrem Händler/Vertreter
bestellen.
Anschliessen
Abbildung 5 zeigt die Scanner-Anschlüsse und ihre Funktionen.
Abbildung 5. Anschlüsse
POS-Terminal Zusätzlicher Port Stromversorgung
Anschluß an diesen Port ist optional
· Gleichstrom-
Brickeingang
· Kennsatzdaten
· Applikations-Download
(falls zutreffend)
· Test-Port
· On Screen Programming (OSP)
· Applikations-Download
· Eingang für RS-232 Handheld Scanner
· Zusätzlicher RS-232 Kennsatz-
Datenausgang
EAS-Anschluß
Anschluß an diesen Port ist optional
· Elektronische Artikelüberwachung
(EAS) Anschluß
Power
EAS Opening
Aux. PortScanner Host
10 Magellan
®
2300HS/2300HSΩ
Bedienung
Scannen von Produkten
Der Scanner wird so installiert, dass das Scanfenster mit der Ladentheke bündig
ist. So erhält man eine maximale Arbeitsfläche, und der Benutzer kann die Artikel
über diese Oberfläche schieben, ohne sie greifen oder aufheben zu müssen. Bar-
codes werden leicht gescannt, wenn sie durch die von dem großen Scanfenster pro-
jizierte Zone bewegt werden (siehe
Abbildung 6a).
Mit Hilfe der FirstStrikeTM Decodierungssoftware kann der Scanner die meisten
schwer lesbaren Codes schnell und ohne übermäßige Ausrichtung lesen.
Abbildung 6. Bedienung des Scanner
BEACHTEN SIE
Ausrichten der Barcode-Aufkleber in Scanrichtung oder zum Scanfen-
ster erhöht die Scanrate. Der Pfeil auf der oberen Abdeckung des
Scanners zeigt die Richtung an, in der die Artikel bewegt werden
sollten (siehe Abbildung 6b).
S
canne
r
Artikel werden
an dem Scanner
vorbeigeschoben
W
a
r
e
nfl
u
ß
S
Scan-Volumen
Gr
ü
n
e
LE
D
L
au
t
st
ä
rke
/
Tonschalte
r
a
c
b
d
Artikel-
Barcode
Quick Reference Guide 11
Lautstärke/Tonschalter
BEACHTEN SIE
Änderungen der Lautstärke, die über die Drucktaste "Volume/Tone"
erfolgt sind, werden beim Herunterfahren des Scanners gelöscht, und
es erfolgt ein Zurücksetzen auf die Werkseinstellungen. Eine dauer-
hafte Änderung der Lautstärke kann mit Hilfe der speziellen Program-
mierkenndaten im Produktreferenzhandbuch vorgenommen werden.
Tabelle 5. Lautstärke/Tonschalter-Funktionen
Betätigungsdauer Funktion Bemerkung
kurz (wenn der Scan-
ner im Bereitschafts-
modus ist)
versetzt den Scanner vom Bereit-
schafts- in den Betriebsmodus
Der Scanner kann in den Bereitschaftsmodus versetzt wer-
den entweder durch:
- Bewegen eines Objektes durch den Scanbereich
- eine Gewichtsänderung auf der Waage
- Scannen mit einem extern angeschlossenen Handscanner
kurz (wenn sich der
Scanner im Betriebs-
modus befindet)
Erhöhung der Lautstärke
Durch kurzzeitiges Betätigen des Schalters wird die
Lautstärke erhöht. Wenn die höchste Stufe erreicht ist, wird
durch erneutes Betätigen die Lautstärke auf die niedrigste
Stufe zurückgesetzt. Danach steigt die Lautstärke wieder an.
Fünf Lautstärken können eingestellt werden.
Halten und beim
Hören des Signals
Erhöhung der Tonhöhe
Betätigen Sie den Schalter für ca. 2 Sekunden und lassen Sie
ihn dann los. Dadurch können die drei möglichen Tonhöhen
(hoch, mittel und tief) eingestellt werden.
4 Sekunden
Scannerdiagnosemodus
a
Dieser Modus erlaubt dem technischen Personal die Identi-
fikation von Problemen, die beim Scanner aufgetreten sind.
Drücken Sie den Schalter für 8 Sekunden oder schalten Sie
zum Verlassen des Scannerdiagnosemodus' den Scanner
aus und ein und starten den Scanner neu.
8 Sekunden
Scanner-Reset
b
Nur das technische Personal sollte einen Reset durchführen.
a. In der Standardeinstellung ist diese Funktion ausgeschaltet, um versehentliche Aktivierung durch den
Benutzer vorzubeugen.
b. Anwender sollten keinen Scanner-Reset durchführen außer unter der Anweisung ausgebildeten Servi-
cepersonals.
12 Magellan
®
2300HS/2300HSΩ
Grüne LED Funktionen
Tabelle 6. Grüne LED Funktionen
LED Anzeige Dauer Bemerkung
Scanner ist aktiv
a
(Normalmodus)
a. Bestimmte LED-Funktionen können wahlweise aktiviert oder deaktiviert werden.
Die Grüne Anzeige ist dauerhaft an und
leuchtet schwach
Der Scanner ist betriebsbereit. Scannen ist sofort
möglich.
Optisches Sig-
nal, das erfolg-
reiches
Scannen anzeigt
a
Grüne Anzeige - helles Aufblinken
Zeigt das erfolgreiche Lesen und Decodieren eines Bar-
codes an.
Programmier-
modusanzeige
Grüne Anzeige - wiederholtes Blinken
Zeigt an, daß sich der Scanner im Barcode-Program-
miermodus befindet. Zum Verlassen des Programmier-
modus schalten Sie aus und ein.
Bereitschafts-
modusanzeige
Die grüne LED-Anzeige blinkt im 2-
Sekunden-Takt.
Der Scanner- oder Lasermotor hat sich nach längerer
Nichtbenutzung automatisch abgeschaltet und ist in den
Bereitschaftsmodus übergegangen..
Host außer
Betrieb
1 Sekunde aus, eine zehntel Sekunde an
Host ermöglicht kein Scannen.
Hardwarefehler-
warnung (Fehler-
modus)
Akustischer tiefer Ton 1 Sekunde und die
grüne/gelbe Anzeige blinkt fortwährend
Zeigt an, daß ein schwerer Hardwarefehler entdeckt
wurde.
Hardwarefehler-
Anzeige (Fehler-
Modus)
Grüne Anzeige blinkt in einer kodierten
Sequenz zusammen mit dem Lautspre-
cher.
Tritt NUR auf, wenn der Lautstärke/Tonknopf betätigt
wurde und eine Hardwarefehlerwarnung auftritt. Diese
Anzeige ermöglicht dem Techniker, den Hardwarefehler
zu identifizieren..
Quick Reference Guide 13
Introduzione
Questa guida offre un sommario delle operazioni principali dello scanner per
utenti inesperti. Installatori, amministratori di sistema e altro personale tecnico
possono trovare informazioni sull'installazione, programmazione ed altre questioni
avanzate nella guida di riferimento del prodotto. Revisioni aggiornate delle pubbli-
cazioni possono essere visualizzate, stampate e scaricate dal sito web Datalogic indi-
cato sulla copertina posteriore di questo manuale. È possibile anche ordinare i
manuali su carta dal proprio rivenditore/distributore.
Connessione
Per comodità, la Figura 7 mostra le connessioni dello scanner e le relative funzioni.
Figura 7. Connessioni
Terminale POS Porta ausiliaria Accensione
· Ingresso Brick CC· Dati etichetta
· Download
dell'applicazione
(dove appropriato)
· Porta di controllo
· Programmazione su schermo (OSP)
· Download applicazione
· Ingresso RS-232 per il lettore palmare
· Uscita ausiliaria RS-232 dati etichetta
Connessione EAS
La connessione su questa porta è
opzionale
La connessione su questa porta è
opzionale
· Sistemi per la sorveglianza
elettronica antitaccheggio
Connessione
Power
EAS Opening
Aux. PortScanner Host
14 Magellan
®
2300HS/2300HSΩ
Funzionamento
Utilizzo dello scanner
Lo scanner è montato in modo che la sua finestra di scansione si trovi sullo stesso
livello del piano di lavoro. Ciò mantiene libero il più possibile il piano di lavoro e
consente anche all'utente di spingere gli articoli sulla sua superficie senza doverli
afferrare o raccogliere. I codici a barre sono scansiti facilmente facendoli passare
nella zona di proiezione della finestra di scansione reale come mostrato in
Figura 8a.
Con il software di decodifica FirstStrike
TM
, lo scanner può leggere anche i codici
più difficili da interpretare in modo rapido e senza bisogno di orientare eccessiva-
mente l'articolo.
Figura 8. Funzionamento dello scanner
NOTA
Affacciando le etichette con il codice a barre nella direzione della scan-
sione, o verso la finestra di scansione, si ottimizzerà la velocità di let-
tura. La freccia posta sullo schermo superiore dello scanner indica la
direzione in cui far muovere gli articoli da scansire (vedere Figura 8b).
S
canne
r
Gli articoli
sono spinti
o fatti scivolare
oltre lo scanner
Dir
e
zi
o
n
e
del
p
rodott
o
V
s
e
Volume di
scansione
LED v
e
r
de
Tasto tono
/
volum
e
a
c
b
d
Codice
a barre
dell'articolo
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Datalogic Megallan 2300HS? Quick Reference Manual

Categoria
Lettori di codici a barre
Tipo
Quick Reference Manual
Questo manuale è adatto anche per