Datalogic PowerScan PBT9500 Manuale del proprietario

Categoria
Lettori di codici a barre
Tipo
Manuale del proprietario

Questo manuale è adatto anche per

PowerScan™ BT9500 Family
Industrial Cordless Handheld
Area Imager Bar Code Reader
Quick Reference Guide
Datalogic ADC, Inc.
959 Terry Street
Eugene, OR 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
©2013 Datalogic, Inc.
An Unpublished Work - All rights reserved. No part of the con-
tents of this documentation or the procedures described
therein may be reproduced or transmitted in any form or by
any means without prior written permission of Datalogic ADC,
Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic
ADC”). Owners of Datalogic products are hereby granted a
non-exclusive, revocable license to reproduce and transmit
this documentation for the purchaser's own internal business
purposes. Purchaser shall not remove or alter any proprietary
notices, including copyright notices, contained in this docu-
mentation and shall ensure that all notices appear on any
reproductions of the documentation.
Should future revisions of this manual be published, you can
acquire printed versions by contacting your Datalogic repre-
sentative. Electronic versions may either be downloadable
from the Datalogic website (www.datalogic.com) or provided
on appropriate media. If you visit our website and would like
to make comments or suggestions about this or other Data-
logic publications, please let us know via the "Contact Data-
logic" page.
DISCLAIMER
Datalogic has taken reasonable measures to provide informa-
tion in this manual that is complete and accurate, however,
Datalogic reserves the right to change any specification at any
time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of
Datalogic S.p.A. in many countries, including the U.S.A. and
the E.U. All other brand and product names may be trade-
marks of their respective owners.
PATENTS
This product may be covered by one or more of the following pat-
ents:
Design Patents: AU344427; AU344428; AU344429; EP1970237;
USD682277; ZL 201230284676.X
Utility Patents: EP996284; EP999514; EP1128315; EP1172756;
EP1396811; EP1413971; EP1828957; JP4435343; US5481098;
US6478224; US6512218; US6513714; US6561427; US6808114;
US6877664; US6997385; US7053954; US7234641; US7387246;
US7721966.
Quick Reference Guide i
Table of Contents
END USER LICENSE AGREEMENT ................................................ iii
Software Product Policy ............................................................... vii
Customers Under Software Support .................................. vii
Description .......................................................................................1
General Features ....................................................................1
Using the PowerScan™ PBT9500 ...................................................2
Installing the Battery Pack ............................................................3
Charging the Batteries ..........................................................6
Changing the Batteries ................................................ 6
Programming ...................................................................................7
Using Programming Bar Codes ............................................7
Configure Other Settings .......................................................7
Resetting Product Defaults ..................................................7
Set Date and Time ..........................................................................8
Linking the Reader ..........................................................................9
Link Datalogic RF Devices to Base.............................. 9
Linking to a Bluetooth Adapter in Serial Port Profile
(Slave) Mode .................................................................. 9
Linking to a Bluetooth Adapter in HID mode........... 10
Variable PIN Code ....................................................... 11
HID Country Mode .........................................................................12
HID Caps Lock State ......................................................................16
HID Alt Mode ..................................................................................17
Power Off .......................................................................................17
Operating Mode .............................................................................18
Scan Mode ............................................................................18
Motion Aiming Control ........................................................19
Pick Mode .......................................................................................20
Multiple Label Reading ........................................................20
Technical Specifications ...............................................................21
LED and Beeper Indications .........................................................25
Error Codes ....................................................................................28
Cleaning ..........................................................................................29
Regulatory Information ................................................................30
Statement of Agency Compliance ......................................30
Imager Labeling ....................................................................33
WEEE Statement ..................................................................38
Datalogic ADC Limited Factory Warranty ...................................39
Ergonomic Recommendations ....................................................41
Services and Support ....................................................................42
Hex-Numeric Keypad ....................................................................43
For HID Variable Pin Code only.................................. 45
ii PowerScan™ PBT9500
NOTES
Quick Reference Guide iii
Datalogic ADC, Inc.
PowerScan™ 9500 PRODUCT SERIES
END USER LICENSE AGREEMENT
Notice to End User: The Datalogic Product you have acquired contains
embedded Software, which is integral to the product's operation. This
Software is being provided to you under license, subject to the terms
and conditions of this Agreement. If you use the Datalogic Product, you
will be deemed to have accepted the terms and conditions of this
Agreement. If you do not intend to be bound to the terms of this
Agreement, Datalogic is not willing to license the Software to you, you
may not use the Datalogic Product or the Software, and you must con-
tact the party from whom you acquired the Datalogic Product for
instructions.
This End User Software License Agreement ("Agreement") is a legally
binding agreement governing the licensing of the Software and Docu-
mentation by Datalogic ADC, Inc. and its Affiliates ("Datalogic") to the
entity or person who has purchased or otherwise acquired a Datalogic
Product ("End User"). For purposes of this Agreement, any software
that is associated with a separate end-user license agreement is
licensed to you under the terms of that license agreement. Datalogic
and End User hereby agree as follows:
1. Definitions
1.1 "Affiliate" means a business entity currently existing or later
acquired that controls, is controlled by, or is under common control
with Datalogic S.p.A.
1.2 "Documentation" means materials such as user's guides, program
reference guides, quick reference guides, manuals, or similar mate-
rials associated with or related to the Datalogic Product, whether in
printed, "online", or other form.
1.3 "Proprietary Information" means: (a) source code, object code, soft-
ware, documentation, and any related internal design, system
design, data base design, algorithms, technology, technical data or
information, implementation techniques, and trade secrets related
to the Software, (b) any other trade secrets marked appropriately
or identified as proprietary or confidential, and (c) any information
that End User, under the circumstances, should recognize as confi-
dential. Proprietary Information does not include any information
that the receiving party can establish was (1) in the public domain,
(2) already in the receiving party's possession or rightfully known
prior to receipt, (3) rightfully learned from a third party not in viola-
tion of any other's proprietary rights, or (4) independently devel-
oped without access to Proprietary Information.
1.4 "Datalogic Product" means the Datalogic® Powerscan™ series scan-
ner product, including all embedded Software in and all Documen-
tation related to such product, which has been purchased or
otherwise acquired by End User, whether obtained directly or indi-
rectly from Datalogic.
1.5 "Software" means any software or computer programs of Datalogic
or its third party licensors in machine readable form which is
embedded in the Datalogic Product, whether obtained directly or
indirectly from Datalogic, including any replacement, update,
upgrade, enhancement or modification.
2. Scope Of License Granted
2.1 Datalogic grants to End User a non-exclusive, non-transferable,
perpetual license to use the Software, solely on the Datalogic Prod-
uct in which it is embedded ("designated Datalogic Product"), in
machine-readable form only, solely for End User's internal busi-
ness purposes. This Agreement does not convey ownership of the
Software to End User. Title to the Software shall be and remain
END USER LICENSE AGREEMENT
iv PowerScan™ PBT9500
with Datalogic or the third party from whom Datalogic has
obtained a licensed right. As used in this Agreement, the term
"purchase" or its equivalents when applied to the Software shall
mean "acquire under license." End User is not entitled to receipt or
use of the source code to any Software.
2.2 End User shall not copy, modify, decompile, disassemble, reverse
engineer, or otherwise reproduce or remanufacture the Software,
whether modified or unmodified, nor sell, assign, sublicense, dis-
tribute, lend, rent, give, or otherwise transfer the Software to any
other person or organization, for purposes other than as expressly
provided in this Agreement, without Datalogic's prior written con-
sent.
3. Transfers, Support
3.1 Any copying, installing, reproduction, remanufacture, reverse engi-
neering, electronic transfer, or other use of the Software on other
than the designated Datalogic Product will be a material breach of
this Agreement. However, Datalogic may elect not to terminate
this Agreement or the granted licenses, but instead may elect to
notify End User that End User is deemed to have ordered and
accepted a license for each breaching use. End User shall pay Data-
logic the applicable list price for such licenses as of the date of such
breach.
3.2 End User shall not sell, assign, sublicense, distribute, lend, rent,
give, or otherwise transfer the Datalogic Product to any third party
unless such third party agrees with Datalogic in writing to be
bound by the terms and conditions of this Agreement. Any such
transfer of the Datalogic Product absent such agreement shall be
null and void.
3.3 End User may obtain support for Software from Datalogic at Data-
logic's standard support fees and under Datalogic's standard sup-
port terms and conditions in effect at the time the support is
requested.
4. Intellectual Property
End User acknowledges that the Software constitutes valuable trade
secrets of Datalogic or Datalogic's third party licensors and that the
Software is protected by intellectual property laws and treaties. The
license set forth in this Agreement does not transfer to End User any
ownership of Datalogic's or its third party licensors' copyrights, patents,
trademarks, service marks, trade secrets, or other intellectual property
rights and End User shall have no right to commence any legal actions
to obtain such rights. End User shall not remove, modify, or take any
other action that would obscure any copyright, trademark, patent
marking, or other intellectual property notices contained in or on the
Datalogic Product.
5. Proprietary Information
5.1 End User acknowledges that Proprietary Information is the confi-
dential, proprietary, and trade secret property of Datalogic and Dat-
alogic's third party licensors and End User acquires no right or
interest in any Proprietary Information.
5.2 End User shall not disclose, provide, or otherwise make available
the Proprietary Information of Datalogic or its third party licensors
to any person other than End User's authorized employees or
agents who are under confidentiality agreement, and End User
shall not use the Proprietary Information other than in conjunction
with use of the Datalogic Product exclusively for End User's internal
business purposes. End User shall take steps to protect the Propri-
etary Information no less securely than if it were End User's own
intellectual property.
5.3 The provisions of this Proprietary Information Section shall survive
END USER LICENSE AGREEMENT
Quick Reference Guide v
and continue for five (5) years after the termination of this Agree-
ment.
6. Limited Warranty
6.1 Datalogic warrants that, under normal use and operation, the Dat-
alogic Product will conform substantially to the applicable Docu-
mentation for the period specified in the Documentation. During
this period, for all reproducible nonconformities for which Datalogic
has been given written notice, Datalogic will use commercially rea-
sonable efforts to remedy nonconformities verified by Datalogic.
End User agrees to supply Datalogic with all reasonably requested
information and assistance necessary to help Datalogic in remedy-
ing such nonconformities. For all defects reported to Datalogic
within the warranty period, Datalogic's liability is limited to provid-
ing End User with one copy of corrections or responding to End
User's problem reports according to Datalogic's standard assis-
tance practices. Datalogic does not warrant that the product will
meet End User's requirements or that use of the product will be
uninterrupted or error free, or that Datalogic's remedial efforts will
correct any nonconformance. This limited warranty does not cover
any product that have been subjected to damage or abuse,
whether intentionally, accidentally, or by neglect, or to unautho-
rized repair or unauthorized installation, and shall be void if End
User modifies the product, uses the product in any manner other
than as established in the Documentation, or if End User breaches
any of the provisions of this Agreement.
6.2 EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DATALOGIC
PRODUCT IS PROVIDED "AS IS" AND DATALOGIC MAKES NO WAR-
RANTIES OF ANY KIND, EXPRESS OR IMPLIED, WRITTEN OR ORAL,
WITH RESPECT TO THE PRODUCT, AND SPECIFICALLY DISCLAIMS
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
7. Infringement
7.1 Datalogic will defend End User against any claim in a lawsuit that
the Datalogic Product furnished hereunder infringe a United States
patent or copyright of a third party and Datalogic will pay any dam-
ages finally awarded against End User by a court of competent
jurisdiction that are attributable to such claim or will pay End
User's part of any settlement that is attributable to such claim,
provided, that 1) End User notifies Datalogic promptly in writing of
the claim, 2) Datalogic controls the defense or settlement of the
claim, and 3) End User cooperates fully with Datalogic in such
defense or settlement. All notices of a claim should be sent to Dat-
alogic ADC, Inc., Legal Department, 959 Terry Street, Eugene, OR
97402.
7.2 In the defense or settlement of any such claim, Datalogic may, at
its option, 1) procure for End User the right to continue using the
Datalogic Product, 2) modify the Datalogic Product so that it
becomes non-infringing, 3) replace the Datalogic Product with an
equivalent product not subject to such claim, or 4) provide End User
an opportunity to return the Datalogic Product and receive a refund
of the purchase price paid, less a reasonable allowance for use.
7.3 Datalogic shall have no liability to End User for claims of infringe-
ment based upon 1) the use of any Datalogic Product in combina-
tion with any product which Datalogic has not either furnished or
authorized for use with such Datalogic Product 2) the use of any
Datalogic Product designed, manufactured, or modified to the
specifications of End User, or 3) End User's modification of the Dat-
alogic Product without written authorization from Datalogic.
7.4 THE FOREGOING STATES DATALOGIC'S COMPLETE AND ENTIRE
OBLIGATION CONCERNING CLAIMS OF PATENT, COPYRIGHT, OR
OTHER INTELLECTUAL PROPERTY INFRINGEMENT, CANCELS AND
END USER LICENSE AGREEMENT
vi PowerScan™ PBT9500
SUPERCEDES ANY PRIOR AGREEMENTS, WHETHER ORAL OR
WRITTEN, BETWEEN THE PARTIES CONCERNING SUCH CLAIMS,
AND WILL NOT BE MODIFIED OR AMENDED BY ANY PAST, CON-
TEMPORANEOUS, OR FUTURE AGREEMENTS OR DEALINGS
BETWEEN THE PARTIES, WHETHER ORAL OR WRITTEN, EXCEPT AS
SET FORTH IN A FUTURE WRITING SIGNED BY BOTH PARTIES.
8. Limitation Of Liability
EXCEPT AS PROVIDED IN SECTION 7, DATALOGIC SHALL NOT BE LIABLE
FOR ANY CLAIMS AGAINST END USER BY ANY OTHER PARTY. IN NO
EVENT SHALL DATALOGIC'S LIABILITY FOR DAMAGES, IF ANY,
WHETHER BASED UPON CONTRACT, TORT (INCLUDING NEGLIGENCE),
PRODUCT LIABILITY, STRICT LIABILITY, WARRANTY, OR ANY OTHER
BASIS, EXCEED THE PRICE OR FEE PAID BY END USER FOR THE DATA-
LOGIC PRODUCT. UNDER NO CIRCUMSTANCES SHALL DATALOGIC BE
LIABLE TO END USER OR ANY THIRD PARTY FOR LOST PROFITS, LOST
DATA, INTERRUPTION OF BUSINESS OR SERVICE, OR FOR ANY OTHER
SPECIAL, CONSEQUENTIAL, CONTINGENT, INDIRECT, INCIDENTAL,
PUNITIVE, EXEMPLARY, OR OTHER SIMILAR DAMAGES, EVEN IF DATA-
LOGIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
9. Government Restricted Rights; International Use
9.1 Use, duplication, or disclosure of the Software by the U.S. Govern-
ment is subject to the restrictions for computer software devel-
oped at private expense as set forth in the U.S. Federal Acquisition
Regulations at FAR 52.227-14(g), or 52.227-19 or in the Rights in
Technical Data and Computer Software clause at DFARS 252.227-
7013(c)(1)(ii), whichever is applicable.
9.2 If End User is using the Datalogic Product outside of the United
States, End User must comply with the applicable local laws of the
country in which the Datalogic Product is used, with U.S. export
control laws, and with the English language version of this Agree-
ment. The provisions of the "United Nations Convention on Inter-
national Sale of Goods" shall not apply to this Agreement.
10. Termination
10.1Either party may terminate this Agreement or any license granted
under this Agreement at any time upon written notice if the other
party breaches any provision of this Agreement.
10.2Upon termination of this Agreement, End User immediately shall
cease using any nonembedded software and shall return to Data-
logic or destroy all non-embedded software covered by this Agree-
ment, and shall furnish Datalogic with a certificate of compliance
with this provision signed by an officer or authorized representa-
tive of End User. For embedded software, End User agrees to sign a
waiver prepared by Datalogic concerning further use of the embed-
ded Software. End User's resumed or continued use of the embed-
ded Software after termination shall constitute End User's
agreement to be bound by the terms and conditions of this Agree-
ment for such use.
11. General Provisions
11.1 Entire Agreement; Amendment. This document contains the
entire agreement between the parties relating to the licensing of
the Software and supersedes all prior or contemporaneous agree-
ments, written or oral, between the parties concerning the licens-
ing of the Software. This Agreement may not be changed,
amended, or modified except by written document signed by Data-
logic.
11.2 Notice. All notices required or authorized under this Agreement
shall be given in writing, and shall be effective when received, with
evidence of receipt. Notices to Datalogic shall be sent to the atten-
Software Product Policy
Quick Reference Guide vii
tion of Contract Administration, Datalogic ADC, Inc., 959 Terry
Street, Eugene, OR 97402, or such other address as may be speci-
fied by Datalogic in writing.
11.3 Waiver. A party's failure to enforce any of the terms and condi-
tions of this Agreement shall not prevent the party's later enforce-
ment of such terms and conditions.
11.4 Governing Law; Venue: This Agreement and the rights of the par-
ties hereunder shall be governed by and construed in accordance
with the laws of the State of Oregon U.S.A, without regard to the
rules governing conflicts of law. The state or federal courts of the
State of Oregon located in either Multnomah or Lane counties shall
have exclusive jurisdiction over all matters regarding this Agree-
ment, except that Datalogic shall have the right, at its absolute dis-
cretion, to initiate proceedings in the courts of any other state,
country, or territory in which End User resides, or in which any of
End User's assets are located.
11.5 Attorneys' Fees. In the event an action is brought to enforce the
terms and conditions of this Agreement, the prevailing party shall
be entitled to reasonable attorneys' fees, both at trial and on
appeal.
- END -
Software Product Policy
Datalogic reserves the right to ship its products with the latest
version of software/firmware available. This provides our cus-
tomers with the very latest in Datalogic software technology.
The only exception to this policy is when the buyer has a signed
contract with Datalogic that clearly defines the terms and condi-
tions for making software/firmware changes in products shipped
to the buyer.
Customers Under Software Support
Customers that elect to subscribe to Datalogic Software Mainte-
nance and Support Agreement will receive 30 days advance notifi-
cation of: (1) the release of a new software version; and/or (2)
discontinuation of any prior software version that will no longer
be supported. Datalogic will provide maintenance for a fee that
will assist customers in transitioning to the next software ver-
sion. If a customer is currently using the software version being
discontinued, the customer may elect to transition to any one of
the newer versions, depending on the hardware in use.
To arrange for a Software Maintenance and Support Agreement
please contact your Datalogic sales person.
Software Product Policy
viii PowerScan™ PBT9500
NOTES
Quick Reference Guide 1
Powerscan™ PBT9500
Description
The PowerScan™ PBT9500 is a feature-rich and rugged
area imager reader. It is offered in several different mod-
els to better fit the different needs of each customer.
The table below shows the unique features of each model:
General Features
Model P/N Optical feature
PBT9500-XX Standard optic, standard and low density codes
PBT9500-HPXX
Autofocus optic, High, standard and low density
codes, wide angle
PBT9500-
DPMXX
High Density optic, high and medium density
codes, DPM (laser, ink jet and dot peen)
Omni-directional
Operating
To read a symbol or capture an image, you sim-
ply aim the reader and pull the trigger. Since
the PowerScan™ PBT9500 is a powerful omni-
directional reader, the orientation of the sym-
bol is not important.
Decoding
Thanks to powerful algorithms, PowerScan™
PBT9500 reliably decodes all major 1D (linear)
barcodes, 2D stacked codes (such as PDF417), 2D
matrix symbols (such as DataMatrix), postal
codes (such as POSTNET, PLANET). The data
stream — acquired from decoding a symbol — is
rapidly sent to the host. The reader is immedi-
ately available to read another symbol.
Formatting and
Concatenating
The string of a decoded code may be processed
according to either a simple or advanced data
formatting and be concatenated.
Imaging
PowerScan™ PBT9500 can also function as a
camera by capturing entire images (valid only
for RS-232 and USB-COM on the Base Station).
Using the PowerScan™ PBT9500
2PowerScan PBT9500
Using the PowerScan™ PBT9500
The PowerScan™ PBT9500 normally functions by captur-
ing and decoding bar codes. The reader is equipped with
an internal motion-sensing function which activates the
aiming system on device motion. The intelligent aiming
system indicates the field of view which should be posi-
tioned over the bar code:
Table 1. Aiming System
Autoscanning
An autoscan command causes the reader to
scan continuously and to monitor the central
zone of its reading area.
Flash Memory
Flash technology allows you to upgrade the
PowerScan™ PBT9500 reader as new symbolo-
gies are supported or as new features become
available.
USA Driver License
Parsing
The reader can be set up to select and output a
subset of data elements from USA Driver
License PDF417 barcodes. This feature can be
enabled using either Datalogic Aladdin™ or the
barcodes in the USA Driver License Parsing
Quick Reference Guide (QRG), available on the
Datalogic website.
Model P/N Aimer pattern
PBT9500/
PBT9500-DPM
PBT9500-HP
Installing the Battery Pack
Quick Reference Guide 3
The field of view indicated by the aiming system will be
smaller when the reader is closer to the bar code and
larger when it is farther from the code. Symbologies with
smaller bars or elements (mil size) should be read closer
to the unit. Symbologies with larger bars or elements (mil
size) should be read farther from the unit.
If the entire bar code is within the aiming field, you will get
a good read. Successful reading is signaled by an audible
tone plus a good-read green spot LED indicator.
Reference the PowerScan 9500 Product Reference Guide
(PRG) for more information about this feature and other
programmable settings.
Installing the Battery Pack
To install, charge and/or do any other action on the bat-
tery, follow the instructions in this manual.
To charge the Battery Pack, See “Charging
the Batteries” on page 6.
Datalogic recommends annual replacement
of rechargeable battery packs to ensure
maximum performance.
WARNING
Do not discharge the battery using any
device except for the scanner. When the bat-
tery is used in devices other than the desig-
nated product, it may damage the battery or
reduce its life expectancy. If the device
causes an abnormal current to flow, it may
cause the battery to become hot, explode or
ignite and cause serious injury.
Lithium-ion battery packs may get hot,
explode or ignite and cause serious injury if
exposed to abusive conditions. Be sure to
follow the safety warnings that follow:
• Do not place the battery pack in fire or heat.
• Do not connect the positive terminal and
negative terminal of the battery pack to each
other with any metal object (such as wire).
• Do not carry or store the battery pack
together with metal objects.
Installing the Battery Pack
4PowerScan PBT9500
WARNING
• Do not pierce the battery pack with nails,
strike it with a hammer, step on it or other-
wise subject it to strong impacts or shocks.
• Do not solder directly onto the battery pack.
• Do not expose the battery pack to liquids, or
allow the battery to get wet.
• Do not apply voltages to the battery pack
contacts.
In the event the battery pack leaks and the
fluid gets into your eye, do not rub the eye.
Rinse well with water and immediately seek
medical care. If left untreated, the battery
fluid could cause damage to the eye.
CAUTION
Always charge the battery at 32° – 113°F (0°
- 45°C) temperature range.
Use only the authorized power supplies, bat-
tery pack, chargers, and docks supplied by
your Datalogic reseller. The use of any other
power supplies can damage the device and
void your warranty.
Do not disassemble or modify the battery.
The battery contains safety and protection
devices, which, if damaged, may cause the
battery to generate heat, explode or ignite.
Do not place the battery in or near fire, on
stoves or other high temperature locations.
Do not place the battery in direct sunlight, or
use or store the battery inside cars in hot
weather. Doing so may cause the battery to
generate heat, explode or ignite. Using the
battery in this manner may also result in a
loss of performance and a shortened life
expectancy.
Do not place the battery in microwave ovens,
high-pressure containers or on induction
cookware.
Immediately discontinue use of the battery
if, while using, charging or storing the bat-
tery, the battery emits an unusual smell,
feels hot, changes color or shape, or appears
abnormal in any other way.
Installing the Battery Pack
Quick Reference Guide 5
As with other types of batteries, Lithium-Ion (LI) batteries
will lose capacity over time. Capacity deterioration is
noticeable after one year of service whether the battery is
in use or not. It is difficult to precisely predict the finite life
of a LI battery, but cell manufacturers rate them at 500
charge cycles. In other words, the batteries should be
expected to take 500 full discharge / charge cycles before
needing replacement. This number is higher if partial dis-
charging / recharging is adhered to rather than full / deep
discharging.
The typical manufacturer advertised useful life of LI bat-
teries is one to three years, depending on usage and num-
ber of charges, etc., after which they should be removed
from service, especially in mission critical applications. Do
not continue to use a battery that is showing excessive
loss of capacity, it should be properly recycled / disposed
of and replaced. For most applications, batteries should
be replaced after one year of service to maintain customer
satisfaction and minimize safety concerns.
Collect and recycle waste batteries separately from the
device in comply with European Directive 2006/66/EC,
2011/65/EU, 2002/96/EC and 2012/19/EU an
dsubse-
quent modifications, US and China regulatory and others
laws and regulations about the environment.
CAUTION
Do not replace the battery pack when the
device is turned on.
Do not remove or damage the battery pack’s
label.
Do not use the battery pack if it is damaged
in any part. Battery pack usage by children
should be supervised.
Installing the Battery Pack
6PowerScan PBT9500
Charging the Batteries
Once the BC 90x0-BT is powered, you can charge the
reader's batteries. Place the PowerScan
BT9500 into the
BC 90x0-BT cradle. The Reader LED on the cradle/battery
charger turns red.
The battery is completely charged when the Reader LED
on the cradle/battery charger turns green.
The battery can also be charged in the spare battery slot
(BC91xx models only) or using the Multi Battery Charger
accessory.
Changing the Batteries
1. Push the button at the bottom of the handle as
shown to release the battery.
2. Pull down to remove the battery.
Button
1
2
Programming
Quick Reference Guide 7
Programming
The reader is factory-configured with a set of standard
default features. Customize your reader through use of
the programming bar codes available in the PowerScan
PBT9500. Check the corresponding features section for
your interface, and also the Data Editing and Symbologies
chapters of the PRG.
Using Programming Bar Codes
This manual contains bar codes which allow you to recon-
figure your reader. Some programming bar code labels,
like the "Reset Default Settings" on page 8, require only
the scan of that single label to enact the change.
Other bar codes require the reader to be placed in Pro-
gramming Mode prior to scanning them. Scan an ENTER/
EXIT bar code once to enter Programming Mode; scan the
desired parameter settings; scan the ENTER/EXIT bar
code again to accept your changes, which exits Program-
ming Mode and returns the reader to normal operation.
Configure Other Settings
Additional programming bar codes are available in the
PRG to allow for customizing programming features. If
your installation requires different programming than the
standard factory default settings, refer to the PRG.
Resetting Product Defaults
If you aren’t sure what programming options are in your
reader, or you’ve changed some options and want your
custom factory settings restored, scan the bar code below
Do not incinerate, disassemble, short ter-
minals or expose to high temperature. Risk
of fire, explosion. Use specified charger
only. Risk of explosion if the battery is
replaced by an incorrect type. Dispose of
the batteries as required by the relevant
laws in force.
WARNING
Set Date and Time
8PowerScan PBT9500
to reset the reader to initial configuration. See the PRG for
other options, and a listing of standard factory settings.
Set Date and Time
1. Scan the Enter/Exit Programming barcode
below to set date and time.
ENTER/EXIT PROGRAMMING MODE
2. Scan the Set Date barcode + six digits for Year,
Month and Day (YYMMDD) from the Hex-
Numeric Keypad on page 43.
Set Date
3. Scan Set Time + six digits for Hours, Minutes and
Seconds (HHMMSS) from the Hex-Numeric Key-
pad on page 43.
Set Time
4. Scan the Enter/Exit Programming barcode to
complete.
Factory defaults are based on the interface
type. Be sure your reader is configured for the
correct interface before scanning this label.
Reset Default Settings
Linking the Reader
Quick Reference Guide 9
Linking the Reader
Link Datalogic RF Devices to Base
For RF devices, before configuring the interface it is nec-
essary to link the handheld with the base.
To link the handheld and the base, press the trigger to
wake up the handheld and mount it into the base. If the
reader was previously linked to another base, you must
first press and hold the button on the base (>5 seconds),
then scan the
Unlink
bar code before re-linking to the new
base.
Linking to a Bluetooth Adapter in Serial Port
Profile (Slave) Mode
1. Install any drivers provided with the Bluetooth
adapter.
2. Scan the
Enable RF Link to Server
label below to
make the scanner visible to the host computer.
3. Use the host computer’s Bluetooth manager to
“Discover new devices” and select "Datalogic
Scanner." If you receive an error message, it may
be necessary to disable security on the device.
4. Use an RS-232 terminal program to see incom-
ing data on the port designated by the com-
puter's Bluetooth manager.
Unlink
Enable RF Link to Server
Linking the Reader
10 PowerScan™ PBT9500
Linking to a Bluetooth Adapter in HID mode
1. Install any drivers provided with the Bluetooth
adapter.
2. Scan the
Link to PC in HID
label below..
3. Use the host computer’s Bluetooth manager to
“Discover new devices” and select "Datalogic
Scanner." If you receive an error message, it may
be necessary to disable security on the device.
4. Use a text editor to see incoming data on the
port designated by the computer's Bluetooth
manager..
The Powerscan BT9500 can be set up to require
a PIN code when connecting. If you want to set
up a PIN, or when adding new equipment to a
system that uses a custom security PIN, please
see the PRG for information.
Link to PC in HID
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60

Datalogic PowerScan PBT9500 Manuale del proprietario

Categoria
Lettori di codici a barre
Tipo
Manuale del proprietario
Questo manuale è adatto anche per