Datalogic Gryphon I GBT4400 Quick Reference Manual

Gryphon™

I GBT4400

General Purpose Handheld

Area Imager Bar Code Reader

with Bluetooth® Wireless Technology

Quick Reference Guide

Datalogic ADC, Inc.

959 Terry Street

Eugene, OR 97402

USA

Telephone: (541) 683-5700

Fax: (541) 345-7140

of this documentation or the procedures described therein may be

reproduced or transmitted in any form or by any means without

prior written permission of Datalogic ADC, Inc. or its subsidiaries or

affiliates ("Datalogic" or "Datalogic ADC"). Owners of Datalogic

products are hereby granted a non-exclusive, revocable license to

reproduce and transmit this documentation for the purchaser's

own internal business purposes. Purchaser shall not remove or

alter any proprietary notices, including copyright notices, con-

tained in this documentation and shall ensure that all notices

appear on any reproductions of the documentation.

Should future revisions of this manual be published, you can

acquire printed versions by contacting your Datalogic representa-

tive. Electronic versions may either be downloadable from the

Datalogic website (www.datalogic.com) or provided on appropriate

media. If you visit our website and would like to make comments

or suggestions about this or other Datalogic publications, please

let us know via the "Contact Datalogic" page.

Disclaimer

Datalogic has taken reasonable measures to provide information

in this manual that is complete and accurate, however, Datalogic

reserves the right to change any specification at any time without

prior notice.

Datalogic and the Datalogic logo are registered trademarks of Dat-

alogic S.p.A. in many countries, including the U.S.A. and the E.U. All

other brand and product names may be trademarks of their

respective owners.

Patents

This product is covered by one or more of the following patents:

Design Patents: EP000870787; EP001177943; USD599799;

USD606076; USD629003; ZL200830142386.5; ZL200930006852.1;

ZL201030175545.9

Utility Patents: EP0996284B1; EP0999514B1; EP1128315B1;

EP1172756B1; EP1396811B1; EP1413971B1; EP1828957B1;

JP4435343B2; US6478224; US6512218; US6513714; US6561427;

US6758403; US6808114; US6877664; US6997385; US7053954;

US7234641; US7387246; US7721966; US8245926; US8561906;

US8590795

Additional patents pending.

Table of Contents

END USER LICENSE AGREEMENT .............................................................i

Software Product Policy ............................................................................iv

Customers under Software Support ..........................................iv

Description .....................................................................................................1

Setting Up the Reader ................................................................................2

Positioning the Base Station .........................................................2

Changing the Base Station Position ................................ 2

Connecting the Base Station ....................................................................4

Securing the DC Power Cord (Optional) ........................ 5

System and Network Layout .........................................................7

Typical Setup with Cradle and Host................................. 7

Using the BC40xx™ Radio Base .....................................................8

Radio Base LEDs ...................................................................... 8

Cleaning ...........................................................................................................9

Charging the Batteries .............................................................................10

Battery Safety ...................................................................................10

Replacing the Batteries ................................................................12

Using the Gryphon™ I GBT4400 ...........................................................14

Linking the Reader ....................................................................................15

Link Datalogic RF Devices to Base................................. 15

Link Scanner to Bluetooth Adapter............................... 15

Power Off ......................................................................................................16

Selecting the Interface Type ..................................................................16

Interface Selection .........................................................................16

Configuring the Interface ................................................. 16

Keyboard Interface.............................................................. 19

Scancode Tables .................................................................. 21

Country Mode....................................................................... 21

Caps Lock State .................................................................... 26

Numlock.................................................................................. 27

Programming ..............................................................................................28

Using Programming Bar Codes .................................................28

Configure Other Settings .............................................................28

Resetting Standard Product Defaults ......................................28

Reading Parameters .................................................................................29

Aiming System ................................................................................29

Good Read Green Spot Duration ..............................................30

Scan Modes .................................................................................................31

Pick Mode ..........................................................................................33

Multiple Labels in a Volume .......................................................33

Technical Specifications ..........................................................................34

LED and Beeper Indications ...................................................................38

Error Codes ..................................................................................................41

Base Station Indications ..........................................................................42

Statement of Agency Compliance ......................................................43

FCC Class B Compliance Statement .........................................43

FCC RF Radiation Exposure Statement........................ 44

Canadian Notice ..............................................................................44

Power Supply ...................................................................................44

Imager Labeling ..............................................................................47

Aiming System...................................................................... 47

WEEE Statement ..............................................................................52

Datalogic ADC Limited Factory Warranty ..............................53

Ergonomic Recommendations .............................................................55

Services and Support ...............................................................................56

Quick Reference Guide i

Datalogic ADC, Inc.

GRYPHON™ PRODUCT SERIES

END USER LICENSE AGREEMENT

Notice to End User: The Datalogic Product you have acquired contains embedded

Software, which is integral to the product's operation. This Software is being provided

to you under license, subject to the terms and conditions of this Agreement. If you use

the Datalogic Product, you will be deemed to have accepted the terms and conditions

of this Agreement. If you do not intend to be bound to the terms of this Agreement,

Datalogic is not willing to license the Software to you, you may not use the Datalogic

Product or the Software, and you must contact the party from whom you acquired the

Datalogic Product for instructions.

This End User Software License Agreement ("Agreement") is a legally binding agree-

ment governing the licensing of the Software and Documentation by Datalogic ADC,

Inc. and its Affiliates ("Datalogic") to the entity or person who has purchased or other-

wise acquired a Datalogic Product ("End User"). For purposes of this Agreement, any

software that is associated with a separate end-user license agreement is licensed to

you under the terms of that license agreement. Datalogic and End User hereby agree

as follows:

1. Definitions.

1.1 "Affiliate" means a business entity currently existing or later acquired that con-

trols, is controlled by, or is under common control with Datalogic S.p.A.

1.2 "Documentation" means materials such as user's guides, program reference

guides, quick reference guides, manuals, or similar materials associated with or

related to the Datalogic Product, whether in printed, "online", or other form.

1.3 "Proprietary Information" means: (a) source code, object code, software, docu-

mentation, and any related internal design, system design, data base design,

algorithms, technology, technical data or information, implementation tech-

niques, and trade secrets related to the Software, (b) any other trade secrets

marked appropriately or identified as proprietary or confidential, and (c) any

information that End User, under the circumstances, should recognize as confi-

dential. Proprietary Information does not include any information that the

receiving party can establish was (1) in the public domain, (2) already in the

receiving party's possession or rightfully known prior to receipt, (3) rightfully

learned from a third party not in violation of any other's proprietary rights, or

(4) independently developed without access to Proprietary Information.

1.4 "Datalogic Product" means the Datalogic® Gryphon™ series scanner product,

including all embedded Software in and all Documentation related to such

product, which has been purchased or otherwise acquired by End User,

whether obtained directly or indirectly from Datalogic.

1.5 "Software" means any software or computer programs of Datalogic or its third

party licensors in machine readable form which is embedded in the Datalogic

Product, whether obtained directly or indirectly from Datalogic, including any

replacement, update, upgrade, enhancement or modification.

2. Scope Of License Granted.

2.1 Datalogic grants to End User a non-exclusive, non-transferable, perpetual

license to use the Software, solely on the Datalogic Product in which it is

embedded ("designated Datalogic Product"), in machine-readable form only,

solely for End User's internal business purposes. This Agreement does not con-

vey ownership of the Software to End User. Title to the Software shall be and

remain with Datalogic or the third party from whom Datalogic has obtained a

licensed right. As used in this Agreement, the term "purchase" or its equiva-

lents when applied to the Software shall mean "acquire under license." End

User is not entitled to receipt or use of the source code to any Software.

2.2 End User shall not copy, modify, decompile, disassemble, reverse engineer, or

otherwise reproduce or remanufacture the Software, whether modified or

unmodified, nor sell, assign, sublicense, distribute, lend, rent, give, or other-

wise transfer the Software to any other person or organization, for purposes

other than as expressly provided in this Agreement, without Datalogic's prior

written consent.

3. Transfers, Support.

3.1 Any copying, installing, reproduction, remanufacture, reverse engineering,

electronic transfer, or other use of the Software on other than the designated

END USER LICENSE AGREEMENT

ii Gryphon™ I GBT4400

Datalogic Product will be a material breach of this Agreement. However, Data-

logic may elect not to terminate this Agreement or the granted licenses, but

instead may elect to notify End User that End User is deemed to have ordered

and accepted a license for each breaching use. End User shall pay Datalogic

the applicable list price for such licenses as of the date of such breach.

3.2 End User shall not sell, assign, sublicense, distribute, lend, rent, give, or other-

wise transfer the Datalogic Product to any third party unless such third party

agrees with Datalogic in writing to be bound by the terms and conditions of

this Agreement. Any such transfer of the Datalogic Product absent such agree-

ment shall be null and void.

3.3 End User may obtain support for Software from Datalogic at Datalogic's stan-

dard support fees and under Datalogic's standard support terms and condi-

tions in effect at the time the support is requested.

4. Intellectual Property.

End User acknowledges that the Software constitutes valuable trade secrets of Data-

logic or Datalogic's third party licensors and that the Software is protected by intellec-

tual property laws and treaties. The license set forth in this Agreement does not transfer

to End User any ownership of Datalogic's or its third party licensors' copyrights, patents,

trademarks, service marks, trade secrets, or other intellectual property rights and End

User shall have no right to commence any legal actions to obtain such rights. End User

shall not remove, modify, or take any other action that would obscure any copyright,

trademark, patent marking, or other intellectual property notices contained in or on the

Datalogic Product.

5. Proprietary Information.

5.1 End User acknowledges that Proprietary Information is the confidential, pro-

prietary, and trade secret property of Datalogic and Datalogic's third party

licensors and End User acquires no right or interest in any Proprietary Informa-

tion.

5.2 End User shall not disclose, provide, or otherwise make available the Propri-

etary Information of Datalogic or its third party licensors to any person other

than End User's authorized employees or agents who are under confidentiality

agreement, and End User shall not use the Proprietary Information other than

in conjunction with use of the Datalogic Product exclusively for End User's

internal business purposes. End User shall take steps to protect the Proprietary

Information no less securely than if it were End User's own intellectual prop-

erty.

5.3 The provisions of this Proprietary Information Section shall survive and con-

tinue for five (5) years after the termination of this Agreement.

6. Limited Warranty.

6.1 Datalogic warrants that, under normal use and operation, the Datalogic Prod-

uct will conform substantially to the applicable Documentation for the period

specified in the Documentation. During this period, for all reproducible non-

conformities for which Datalogic has been given written notice, Datalogic will

use commercially reasonable efforts to remedy nonconformities verified by

Datalogic. End User agrees to supply Datalogic with all reasonably requested

information and assistance necessary to help Datalogic in remedying such

nonconformities. For all defects reported to Datalogic within the warranty

period, Datalogic's liability is limited to providing End User with one copy of

corrections or responding to End User's problem reports according to Data-

logic's standard assistance practices. Datalogic does not warrant that the prod-

uct will meet End User's requirements or that use of the product will be

uninterrupted or error free, or that Datalogic's remedial efforts will correct any

nonconformance. This limited warranty does not cover any product that have

been subjected to damage or abuse, whether intentionally, accidentally, or by

neglect, or to unauthorized repair or unauthorized installation, and shall be

void if End User modifies the product, uses the product in any manner other

than as established in the Documentation, or if End User breaches any of the

provisions of this Agreement.

6.2 EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DATALOGIC PRODUCT IS PRO-

VIDED "AS IS" AND DATALOGIC MAKES NO WARRANTIES OF ANY KIND,

EXPRESS OR IMPLIED, WRITTEN OR ORAL, WITH RESPECT TO THE PRODUCT,

AND SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABIL-

ITY AND FITNESS FOR A PARTICULAR PURPOSE.

END USER LICENSE AGREEMENT

Quick Reference Guide iii

7. Infringement.

7.1 Datalogic will defend End User against any claim in a lawsuit that the Datalogic

Product furnished hereunder infringe a United States patent or copyright of a

third party and Datalogic will pay any damages finally awarded against End

User by a court of competent jurisdiction that are attributable to such claim or

will pay End User's part of any settlement that is attributable to such claim,

provided, that 1) End User notifies Datalogic promptly in writing of the claim,

2) Datalogic controls the defense or settlement of the claim, and 3) End User

cooperates fully with Datalogic in such defense or settlement. All notices of a

claim should be sent to Datalogic ADC, Inc., Legal Department, 959 Terry

Street, Eugene, OR 97402.

7.2 In the defense or settlement of any such claim, Datalogic may, at its option, 1)

procure for End User the right to continue using the Datalogic Product, 2)

modify the Datalogic Product so that it becomes non-infringing, 3) replace the

Datalogic Product with an equivalent product not subject to such claim, or 4)

provide End User an opportunity to return the Datalogic Product and receive a

refund of the purchase price paid, less a reasonable allowance for use.

7.3 Datalogic shall have no liability to End User for claims of infringement based

upon 1) the use of any Datalogic Product in combination with any product

which Datalogic has not either furnished or authorized for use with such Data-

logic Product 2) the use of any Datalogic Product designed, manufactured, or

modified to the specifications of End User, or 3) End User's modification of the

Datalogic Product without written authorization from Datalogic.

7.4 THE FOREGOING STATES DATALOGIC'S COMPLETE AND ENTIRE OBLIGATION

CONCERNING CLAIMS OF PATENT, COPYRIGHT, OR OTHER INTELLECTUAL

PROPERTY INFRINGEMENT, CANCELS AND SUPERCEDES ANY PRIOR AGREE-

MENTS, WHETHER ORAL OR WRITTEN, BETWEEN THE PARTIES CONCERNING

SUCH CLAIMS, AND WILL NOT BE MODIFIED OR AMENDED BY ANY PAST, CON-

TEMPORANEOUS, OR FUTURE AGREEMENTS OR DEALINGS BETWEEN THE PAR-

TIES, WHETHER ORAL OR WRITTEN, EXCEPT AS SET FORTH IN A FUTURE

WRITING SIGNED BY BOTH PARTIES.

8. Limitation Of Liability.

EXCEPT AS PROVIDED IN SECTION 7, DATALOGIC SHALL NOT BE LIABLE FOR ANY CLAIMS

AGAINST END USER BY ANY OTHER PARTY. IN NO EVENT SHALL DATALOGIC'S LIABILITY

FOR DAMAGES, IF ANY, WHETHER BASED UPON CONTRACT, TORT (INCLUDING NEGLI-

GENCE), PRODUCT LIABILITY, STRICT LIABILITY, WARRANTY, OR ANY OTHER BASIS,

EXCEED THE PRICE OR FEE PAID BY END USER FOR THE DATALOGIC PRODUCT. UNDER NO

CIRCUMSTANCES SHALL DATALOGIC BE LIABLE TO END USER OR ANY THIRD PARTY FOR

LOST PROFITS, LOST DATA, INTERRUPTION OF BUSINESS OR SERVICE, OR FOR ANY OTHER

SPECIAL, CONSEQUENTIAL, CONTINGENT, INDIRECT, INCIDENTAL, PUNITIVE, EXEMPLARY,

OR OTHER SIMILAR DAMAGES, EVEN IF DATALOGIC HAS BEEN ADVISED OF THE POSSIBIL-

ITY OF SUCH DAMAGES.

9. Government Restricted Rights; International Use.

9.1 Use, duplication, or disclosure of the Software by the U.S. Government is sub-

ject to the restrictions for computer software developed at private expense as

set forth in the U.S. Federal Acquisition Regulations at FAR 52.227-14(g), or

52.227-19 or in the Rights in Technical Data and Computer Software clause at

DFARS 252.227-7013(c)(1)(ii), whichever is applicable.

9.2 If End User is using the Datalogic Product outside of the United States, End

User must comply with the applicable local laws of the country in which the

Datalogic Product is used, with U.S. export control laws, and with the English

language version of this Agreement. The provisions of the "United Nations

Convention on International Sale of Goods" shall not apply to this Agreement.

10. Termination.

10.1 Either party may terminate this Agreement or any license granted under this

Agreement at any time upon written notice if the other party breaches any

provision of this Agreement.

10.2 Upon termination of this Agreement, End User immediately shall cease using

any nonembedded software and shall return to Datalogic or destroy all non-

embedded software covered by this Agreement, and shall furnish Datalogic

with a certificate of compliance with this provision signed by an officer or

authorized representative of End User. For embedded software, End User

agrees to sign a waiver prepared by Datalogic concerning further use of the

embedded Software. End User's resumed or continued use of the embedded

Software after termination shall constitute End User's agreement to be bound

by the terms and conditions of this Agreement for such use.

Software Product Policy

iv Gryphon™ I GBT4400

11. General Provisions.

11.1 Entire Agreement; Amendment. This document contains the entire agreement

between the parties relating to the licensing of the Software and supersedes

all prior or contemporaneous agreements, written or oral, between the parties

concerning the licensing of the Software. This Agreement may not be

changed, amended, or modified except by written document signed by Data-

logic.

11.2 Notice. All notices required or authorized under this Agreement shall be given

in writing, and shall be effective when received, with evidence of receipt.

Notices to Datalogic shall be sent to the attention of Contract Administration,

Datalogic ADC, Inc., 959 Terry Street, Eugene, OR 97402, or such other address

as may be specified by Datalogic in writing.

11.3 Waiver. A party's failure to enforce any of the terms and conditions of this

Agreement shall not prevent the party's later enforcement of such terms and

conditions.

11.4 Governing Law; Venue: This Agreement and the rights of the parties hereun-

der shall be governed by and construed in accordance with the laws of the

State of Oregon U.S.A, without regard to the rules governing conflicts of law.

The state or federal courts of the State of Oregon located in either Multnomah

or Lane counties shall have exclusive jurisdiction over all matters regarding

this Agreement, except that Datalogic shall have the right, at its absolute dis-

cretion, to initiate proceedings in the courts of any other state, country, or ter-

ritory in which End User resides, or in which any of End User's assets are

located.

11.5 Attorneys' Fees. In the event an action is brought to enforce the terms and

conditions of this Agreement, the prevailing party shall be entitled to reason-

able attorneys' fees, both at trial and on appeal.

- END -

Software Product Policy

Datalogic reserves the right to ship its products with the latest version of software/

firmware available. This provides our customers with the very latest in Datalogic soft-

ware technology.

The only exception to this policy is when the buyer has a signed contract with Datalog-

ic that clearly defines the terms and conditions for making software/firmware changes

in products shipped to the buyer.

Customers under Software Support

Customers that elect to subscribe to Datalogic Software Maintenance and Support

Agreement will receive 30 days advance notification of: (1) the release of a new soft-

ware version; and/or (2) discontinuation of any prior software version that will no lon-

ger be supported. Datalogic will provide maintenance for a fee that will assist

customers in transitioning to the next software version. If a customer is currently using

the software version being discontinued, the customer may elect to transition to any

one of the newer versions, depending on the hardware in use.

To arrange for a Software Maintenance and Support Agreement please contact your

Datalogic sales person.

Quick Reference Guide 1

Gryphon™ I GBT4400

Description

With rich feature sets and extensive options, the Gryphon™

product series from Datalogic represents the premium level of

data collection equipment for general purpose applications.

The Gryphon GBT4400 readers have enhanced optics with

improved motion tolerance allowing codes placed on fast

moving objects to be easily and quickly captured, creating the

ideal reader for tasks requiring high throughput like those

found in retail and light industrial environments.

Omni-

Directional

Operation

To read a symbol or capture an image, simply aim

the reader and pull the trigger. The Gryphon™ I

GBT4400 is a powerful omni-directional reader, so

the orientation of the symbol is not important.

Datalogic’s exclusive patented ‘Green Spot’ for

good-read feedback helps to improve productiv-

ity in noisy environments or in situations where

silence is required. When using the product with

the cradle at a 45° position, the Green Spot can

work as an aiming system to aid in positioning

the bar code for quick and intuitive reading.

Decoding

Reliably decodes all standard 1D (linear) and 2D

bar codes, including GS1 DataBar™ linear codes,

Postal Codes (China Post), Stacked Codes (such as

GS1 DataBar Expanded Stacked, GS1 DataBar

Stacked, GS1 DataBar, Stacked Omnidirectional).

The data stream — acquired from decoding a

symbol — is rapidly sent to the host. The reader is

immediately available to read another symbol.

Imaging

The Gryphon™ I GBT4400 can also function as a

camera by capturing entire images or image por-

tions of labels, signatures, and other items.

Setting Up the Reader

2 Gryphon™ I GBT4400

Setting Up the Reader

Follow the steps below to connect and get your reader up and

communicating with its host.

1. Configure the Base Station starting on this page.

2. Charge the Batteries (see page 10).

3. Link to the Base Station (see page 15).

4. Select the Interface Type (see page 16).

5. Configure the Reader starting on page 28 (optional,

depends on settings needed).

Positioning the Base Station

The base station/charger may be set up in desk application to

hold the reader in two different positions, either a horizontal

or standing position, in order to provide the most comfortable

use depending on needs.

Changing the Base Station Position

The base station is configured by installing one of two sets of

mechanical parts that come with the cordless kit. The default

mounts (shown below) provide three options: vertical (wall)

mounting, standing (45°), or horizontal mounting with a

higher mechanical retention of the scanner. Use the other

mounts only for horizontal mounting, with lower retention of

the scanner. The different parts may be interchanged to cus-

tomize retention preferences.

A tool such as a rigid pen or a flat screwdriver can be used

to change the mounts. Do not allow it to touch the con-

tacts.

Standing

Horizontal

Setting Up the Reader

Quick Reference Guide 3

1. Insert the appropriate parts for the desired base station

position, as shown below.

2. Using your thumbs, push open the plastic tabs on the

bottom of the base to free the wing holders.

CAUTION

To ensure best contact and performance, do not intermix

the parts of the two different mount sets.

Standing,

Horizontal

or Vertical

Only

Tab

Connecting the Base Station

4 Gryphon™ I GBT4400

3. The stand can now be repositioned in either horizon-

tal or standing position.

Connecting the Base Station

Figure 1 on page 5

shows how to connect the Base Station to a

terminal, PC or other host device. Turn off the host before

connection and consult the manual for that equipment (if

necessary) before proceeding. Connect the interface cable be-

fore applying power to the Base Station.

Base Station Connection and Routing:

Fully insert the Power Ca-

ble and Interface (I/F) Cable connectors into their respective

ports in the underside of the Base Station (see

Figure 1

). Then

connect to an AC Adapter, and plug the AC power cord into

the (wall) outlet.

The Gryphon GBT44XX can also be Powered by the Terminal.

When powered by the Terminal, the battery charger is

automatically set as Slow charge.

For some specific interfaces or hosts or lengths of cable, the

use of an external power supply may be recommended for

full recharging capability (see

Technical Specifications

on page 34

for more details).

Horizontal

Standing

Connecting the Base Station

Quick Reference Guide 5

Figure 1. Connecting the Base Station

Securing the DC Power Cord (Optional)

The DC power cord for the adapter can be secured to the bot-

tom of the base in order to maximize the mechanical retention

of the cable itself. The routing of the power cord can be

changed to accommodate base station positioning: horizontal,

stand or wall mount. The cables can be looped around to the

front of the Base Station, or fed directly out the back of the

Base Station, as shown in

Figure 2

.

Figure 2. Options for routing the DC cord

Please refer to the arrows depicted on the bottom of the base

when placing the cables, detailed in

Figure 3

.

Base

Station

I/F Cable

AC/DC

Adapter

DC Power

Cord

Wall plug

Connector

Connecting the Base Station

6 Gryphon™ I GBT4400

Figure 3. Arrows showing routing

Host Connection:

Verify before connection that the reader’s ca-

ble type is compatible with your host equipment.

Most connections plug directly into the host device as shown

in

Figure 4

. Keyboard Wedge interface cables have a ‘Y’ connec-

tion where its female end mates with the male end of the cable

from the keyboard and the remaining end at the keyboard port

on the terminal/PC.

Figure 4. Connecting to the Host

The Gryphon I GBT4400 can be set up to require a PIN code

when connecting to the host. If you are adding new equip-

ment to a system that uses a custom security PIN, please

see the PRG for information before proceeding.

U

S

B

I

B

M

K

e

y

b

o

a

r

d

W

e

d

g

e

W

a

n

d

or...

Connecting the Base Station

Quick Reference Guide 7

Power Connection:

Plug the AC Adapter into an approved AC

wall socket with the cable facing downwards (as shown in

Fig-

ure 1

) to prevent undue strain on the socket.

Disconnecting the Cable:

To detach the cable, insert a paper clip

or similar object into the hole on the base, as shown.

Figure 5. Disconnecting the Cable

System and Network Layout

Typical Setup with Cradle and Host

Figure 6. Reader Layout

Insert

Paper Clip

Connecting the Base Station

8 Gryphon™ I GBT4400

Using the BC40xx™ Radio Base

Radio Base LEDs

LEDs on the Gryphon Base provide information about the

Base as well as battery charging status, as shown in

Figure 7

.

Figure 7. Gryphon Base LEDs

Table 1. Radio Base LEDs

The button can be used to force device connection via the Da-

talogic Aladdin Software tool, to force a BT disconnect, and

for paging the scanner when it is activated. Refer to the Gry-

phon I GBT4400 Product Reference Guide (PRG) for a more

detailed explanation.

LED STATUS

Power on /

Data

Yellow On = Base is powered

Yellow Blinking = Base receives data

and commands from the Host or the

Reader.

Charging Red On = the Battery is charging.

Charge com-

pleted

Green On = the Battery is completely

charged.

Charging +

Charge com-

pleted

Red and Green Blinking together = the

Reader is not correctly placed onto the

Base.

YELLOW LED

RED LED —

GREEN LED

BUTTON

Cleaning

Quick Reference Guide 9

Cleaning

Exterior surfaces and scan windows exposed to spills, smudges

or debris require periodic cleaning to ensure best performance

during scanning operations. Contacts on the scanner and the

base should also be cleaned as needed to ensure a good connec-

tion.

Use a soft, dry cloth to clean the product. If the product is very

soiled, clean it with a soft cloth moistened with a diluted non-

aggressive cleaning solution or diluted ethyl alcohol.

CAUTION

Do not use abrasive or aggressive cleansing agents or

abrasive pads to clean scan windows, contacts or plas-

tics.

Do not spray or pour liquids directly onto the unit.

Charging the Batteries

10 Gryphon™ I GBT4400

Charging the Batteries

To charge the battery, simply insert the Gryphon into the base.

When the scanner is fully seated in the cradle, it will sound a

“chirp” to indicate that the cradle has detected the scanner

connection.

The LEDs on the base (shown in

Table 1

) will indicate the sta-

tus of the battery.

Battery Safety

To install, charge and/or perform any other action on the bat-

tery, follow the instructions in this manual.

Before using the Battery, read “Battery Safety” in the follow-

ing section. Datalogic recommends annual replacement of

rechargeable battery packs to ensure maximum perfor-

mance.

WARNING

Do not discharge the battery using any device except for

the scanner. When the battery is used in devices other

than the designated product, it may damage the battery

or reduce its life expectancy. If the device causes an

abnormal current to flow, it may cause the battery to

become hot, explode or ignite and cause serious injury.

Lithium-ion battery packs may get hot, explode or ignite

and cause serious injury if exposed to abusive conditions.

Be sure to follow the safety warnings listed on the follow-

ing page.

WARNING

• Do not place the battery pack in fire or heat.

• Do not connect the positive terminal and negative

terminal of the battery pack to each other with any

metal object (such as wire).

• Do not carry or store the battery pack together with

metal objects.

• Do not pierce the battery pack with nails, strike it

with a hammer, step on it or otherwise subject it to

strong impacts or shocks.

• Do not solder directly onto the battery pack.

• Do not expose the battery pack to liquids, or allow

the battery to get wet.

• Do not apply voltages to the battery pack contacts.

Charging the Batteries

Quick Reference Guide 11

As with other battery types, Lithium-Ion (LI) batteries will

lose capacity over time. Capacity deterioration is noticeable af-

ter one year of service whether the battery is in use or not. It is

difficult to precisely predict the finite life of a LI battery, but

cell manufacturers rate them at 500 charge cycles. In other

words, the batteries should be expected to take 500 full dis-

charge/charge cycles before needing replacement. This num-

ber is higher if partial discharging/recharging is adhered to

rather than full/deep discharging.

WARNING

In the event the battery pack leaks and the fluid gets into

your eye, do not rub the eye. Rinse well with water and

immediately seek medical care. If left untreated, the bat-

tery fluid could cause damage to the eye.

CAUTION

Always charge the battery at 32° – 104°F (0° - 40°C) tem-

perature range.

Use only the authorized power supplies, battery pack,

chargers, and docks supplied by your Datalogic reseller.

The use of any other power supplies can damage the

device and void your warranty.

Do not disassemble or modify the battery. The battery

contains safety and protection devices, which, if dam-

aged, may cause the battery to generate heat, explode or

ignite.

CAUTION

Do not place the battery in or near fire, on stoves or other

high temperature locations.

Do not place the battery in direct sunlight, or use or store

the battery inside cars in hot weather. Doing so may cause

the battery to generate heat, explode or ignite. Using the

battery in this manner may also result in a loss of perfor-

mance and a shortened life expectancy.

CAUTION

Do not place the battery in microwave ovens, high-pres-

sure containers or on induction cookware.

Immediately discontinue use of the battery if, while

using, charging or storing the battery, the battery emits

an unusual smell, feels hot, changes color or shape, or

appears abnormal in any other way.

Do not replace the battery pack when the device is turned

on.

Do not remove or damage the battery pack’s label.

Do not use the battery pack if it is damaged in any part.

Battery pack usage by children should be supervised.

Charging the Batteries

12 Gryphon™ I GBT4400

The useful life of LI batteries depends on usage and number

of charges, etc., after which they should be removed from ser-

vice, especially in mission critical applications. Do not contin-

ue to use a battery showing excessive loss of capacity, it should

be properly recycled / disposed of and replaced.

Collect and recycle waste batteries separately from the device

to comply with European Directive 2006/66/EC, 2011/65/

EU, 2002/96/EC and and 2012/19/EU, and subsequent

modifications, US and China regulatory and other laws and

regulations about the environment.

Replacing the Batteries

Use the following procedure to change the reader’s battery:

1. With a screwdriver, unscrew the battery cover screw.

CAUTION

Storage of batteries for long time at fully charged status or at

fully discharged status should be avoided.

CAUTION

Only in case of long storage, to avoid deep discharge of the

battery it is recommended to partially recharge the battery

every three months to keep the charge status at a medium

level.

As a reference, run a fast recharge for 20 minutes every three

months on unused products to avoid any performance deteri-

oration of the cell.

Before proceeding, read “Battery Safety” on the preced-

ing pages. Datalogic recommends annual replacement of

rechargeable battery packs to ensure maximum perfor-

mance.

La pagina sta caricando ...

Datalogic Gryphon I GBT4400 Quick Reference Manual

Datalogic Gryphon I GBT4400 Quick Reference Manual

in altre lingue

Documenti correlati

Altri documenti