Dymo LT-100T Manuale utente

Marca: Dymo

Modello: LT-100T

Categoria: Stampanti per etichette

Tipo: Manuale utente

Questo manuale è adatto anche per

LetraTag

LT-100T

www.dymo.co m

User Guide

LT Momentum AUS.indd 1 19-03-2007 09:12:46

LetraTag User Guide

≠

Label Exit

Memory Save

Memory Recall

∞

LCD Display

≤

Power Connector

≥

Power

Cutter

Insert

∂

Format

∑

Settings

∏

Clear

Space Bar

∫

Navigation

Cancel

Num Lock

CAPS

Back Space

≠ Æ ß ∞ ± ≤

≥

¥ ∫

µ ª

∂ º

∑ Ω

∏ ø

Figure 1 DYMO LetraTag Labelmaker

Cancel

Clear

LT Momentum AUS.indd 2 19-03-2007 09:12:47

About Your New Labelmaker

With your new DYMO LetraTag® labelmaker, you can create a wide

variety of high-quality, self-adhesive labels. You can choose to print

your labels in many different font sizes and styles. The labelmaker

uses DYMO LetraTag (LT)

12 mm

label cassettes. LT cassettes are

available in multiple colors of plastic and metallic tape, and in

white iron-on tape.

Visit www.dymo.com for information on obtaining labels and

accessories for your labelmaker.

Warranty Registration

Please complete the warranty registration card and return it to

the appropriate Customer Support address within seven days. Visit

www.dymo.com/registration for details or to register online.

Getting Started

Follow the instructions in this section to print your first label.

Connecting the Power

The labelmaker is powered by standard batteries or an AC power

adapter. To save power, the labelmaker will automatically turn off

after two minutes of inactivity.

LT Momentum AUS.indd 3 19-03-2007 09:12:47

Inserting the Batteries

The labelmaker uses four high-capacity AA alkaline batteries.

To insert the batteries

1. Remove the battery compartment

cover. See Figure 2.

2. Insert the batteries following the

polarity markings (+ and –).

3. Replace the cover.

Ç Remove the batteries if the

labelmaker will not be used for a long

period of time.

Figure 2

Connecting the Optional Power Adapter

An optional 9 Volt,1.5 A power adapter can also be used to power

the labelmaker. Connecting the AC adapter to the labelmaker

disconnects the batteries as a power source.

To connect the power adapter

1. Plug the power adapter into the power connector on the top of

the labelmaker.

2. Plug the other end of the power adapter into a power outlet.

LT Momentum AUS.indd 4 19-03-2007 09:12:48

Ç Make sure the labelmaker power is turned off before you

disconnect the power adapter from the main power source.

Otherwise, your most recent memory settings will be lost.

Inserting the Label Cassette

Your labelmaker comes with one

label cassette. Visit www.dymo.

com for information about purchasing

additional label cassettes.

Figure 3

To insert the label cassette

1. Lift the label cassette cover to open

the label compartment.

See Figure 3.

Ç Before using the labelmaker for

the first time, remove the protective

cardboard insert from label exit slot.

See Figure 4.

Figure 4

2. Insert the cassette with the label positioned

between the print head and pinch roller.

3. Press firmly until cassette clicks into place.

4. Close the label cassette cover and press

â to turn on the power.

LT Momentum AUS.indd 5 19-03-2007 09:12:50

Selecting a Language

The first time you turn on the power, you are asked to select your

desired language. By default, the language is set to English. The

language option you choose determines the character set that is

available.

To select a language

1. Press

ä.

2. Use the up or down arrow key to select Language and press

ã.

3. Use the up or down arrow key to select the language you want

and press ã.

Setting the Date and Time

You need to set the current date and time so that the date is correct

if you choose to automatically insert a date on your label.

To set the date and time

1. Press

ä.

2. Use the up or down arrow key to select Set Date and press

ã.

The default date is displayed.

3. Use the left or right arrow key to move the cursor over each

setting (month, day, and year) and use the up or down arrow

keys to increase or decrease the value.

LT Momentum AUS.indd 6 19-03-2007 09:13:36

4. When finished, press ã. The default time is displayed.

5. Use the left or right arrow key to move the cursor over each

setting (hours and minutes) and use the up or down arrow keys

to increase or decrease the value.

6. When finished, press

ã.

Printing Your First Label

You are now ready to print your first label.

To print a label

1. Enter text to create a simple label.

2. Press

å.

3. Press the cutter button to cut the label.

Congratulations! You printed your first label. Continue reading to

learn more about the options available for creating labels.

LT Momentum AUS.indd 7 19-03-2007 09:13:37

Getting to Know the Labelmaker

Become familiar with the location of the feature and function keys

on your labelmaker. Refer to Figure 1 on the inside front cover. The

following sections describe each feature in detail.

Power

The â button turns the power on and off. After two minutes of

no activity, the power is switched off automatically. The last label

created is remembered and displayed when the power is turned

back on. The previously selected style settings are also restored.

You can also press â to cancel printing and return to edit mode.

LCD Display

You can enter up to 100 characters and

spaces on a label; however, the display

will only show a small portion of the

characters. And, with DYMO’s exclusive

graphical display, any formatting you

add is visible instantly.

For example, the italics and rounded

border added to the text in Figure 5

are clearly displayed.

 ≠ Font size ß CAPS

Æ # lines ∞ Num Lock

Figure 5

Feature indicators appear along the top of the display to let you

know when a feature is selected.

LT Momentum AUS.indd 8 19-03-2007 09:13:39

CAPS Mode

The [ key toggles capitalization on or o. When CAPS mode is

turned on, the CAPS mode indicator is shown on the display and all

letters that you enter will be capitalized. The default setting is CAPS

mode on. When CAPS mode is o, all letters appear in lower case.

Num Lock

The ñ key provides access to the numbers located on some of

the alphabetic keys. When Num Lock mode is turned on, the Num

Lock indicator is shown on the display and the numbers 0 through

9 appear when you press the corresponding letter keys. Num Lock is

turned o by default.

Backspace

The ó key removes the character to the left of the cursor.

Clear

The î key clears all label text and formatting.

Navigation Keys

You can review and edit your label using the left and right arrow keys

on the Navigation key. You can navigate through menu selections

using the up and down arrow keys, and then press

to make a selection.

LT Momentum AUS.indd 9 19-03-2007 09:13:39

Cancel

The ú key allows you to exit from a menu without making a

selection or to cancel an action.

Format

The ô key displays the Size, Style, and Borders submenus. These

formatting features are described later in this User Guide.

Insert

The ò key allows you to insert symbols, a second line, or the

date on your label.

Settings

The ä key displays the Preview, Language, Set Date, and Set

Contrast submenus. These features are described later in this User

Guide.

Formatting Your Label

You can choose from a number of formatting options to enhance

the appearance of your labels.

Changing the Font Size

Five font sizes are available for your labels: Extra Small, Small, Medium,

Large, and Extra Large. When you select a size, that size

applies to all characters on a label.

LT Momentum AUS.indd 10 19-03-2007 09:13:39

To set the font size

1. Press the ô key.

2. Use the up or down arrow keys to select Size and press ã.

3. Use the up or down arrow keys to select the desired font size and

then press ã.

Adding Font Styles

You can choose from six di erent font styles:

AaAbCc Normal

AaAbCc Bold

AaAbCc Italic

Outline

Shadow

Vertical

When you select a style, that style applies to all characters. Styles

can be used with alphanumeric characters and some symbols.

To set the font style

1. Press ô.

2. Use the up or down arrow key to select Style and press ã.

3. Use the up or down arrow key to select a font style and press ã.

LT Momentum AUS.indd 11 19-03-2007 09:13:39

Creating Two-Line Labels

You can print a maximum of two lines on labels.

To create a two-line label

1. Type the text for the first line and press ò.

2. Use the arrow keys to select Second Line and press

ã. A multi-

line symbol is inserted at the end of the first line, but will not

print on the label.

3. Type the text for the second line.

Adding the Date

You can insert the date on your label. The date format is MMM DD,

YY (US) or DD MMM YY (Europe) depending upon the version of

your labelmaker.

To insert the date

1. Press

ò.

2. Select

Date and press ã.

LT Momentum AUS.indd 12 19-03-2007 09:13:39

Adding Box and Underline Styles

You can highlight your text by choosing a box or underline style.

Underline

Edged

Square

Train

Pointed

Sweet Hearts

Rounded

Flowers

Crocodile

A label can be underlined or enclosed in a box, but not both

together.

To add an underline or box style

1. Press

ô.

2. Select

Borders, and press ã.

3. Select underline or a box style and press

ã.

On two-line labels, both lines are underlined. In box style mode, all

the lines are enclosed in one box style.

LT Momentum AUS.indd 13 19-03-2007 09:13:40

Using Symbols and Special Characters

Symbols and other special characters can be added to your labels.

Adding Symbols

The labelmaker supports the extended symbol set shown below.

LT Momentum AUS.indd 14 19-03-2007 09:13:41

To insert a symbol

1. Press

ò, select Symbols, and press ã. The first row of

symbols shown in the table appears in the display.

2. Use the arrow keys to move to the desired symbol. The left and

right arrows move horizontally along a row of symbols. The

up and down arrow keys scroll vertically through the rows of

symbols.

3. When you locate the symbol, press

ã to add the symbol to your

label.

The labelmaker remembers the last symbol used. The next time

you choose to insert a symbol, the last symbol that you used is

automatically selected.

Adding International Characters

The labelmaker supports the extended Latin character set using

RACE technology. Similar to using a mobile phone keypad, when

you hold down a letter key for longer than one second, you will

scroll through variations on that letter. To insert the character,

release the key when the desired character appears.

For example, if French is selected as the language and you hold

down the letter a, you will see a à â æ and so on through all the

variations available. The character variations and the order in which

the variations appear depend on the language you have selected

to use.

LT Momentum AUS.indd 15 19-03-2007 09:13:41

Printing Options

You can preview your label and adjust the printing contrast.

Previewing Your Label

You can preview the text or format of your label prior to printing. A

two-line label is previewed as a single-line label with a line break

character between the two lines.

To preview your label

1. Press

ä.

2. Select Preview and press

ã.

The text of the label scrolls across the display.

Adjusting the Print Contrast

You can adjust the print contrast to fine tune the print quality of

your label.

To set the contrast

1. Press

ä.

2. Select

Set Contrast and press ã.

3. Use the arrow keys to select a contrast setting and press

ã.

LT Momentum AUS.indd 16 19-03-2007 09:13:41

Using Labelmaker Memory

The labelmaker has a powerful memory feature that allows you to

store the text of up to nine labels you use frequently.

Storing Label Text

You can store up to nine specific labels you use frequently.

To store the current label text

1. Press

ö. The first of the memory fields is displayed.

2. Use the arrow keys to move through the fields. You can store new

text in any of the memory locations.

3. Select a memory location and press

ã.

Your label text is saved and you are returned to the label.

Recalling Stored Labels

You can easily recall labels stored in memory to use at a later time.

To recall labels

1. Press

õ. The first memory location is displayed similar to

storing a label or format.

2. Use the arrow keys to select a label to recall and press

ã.

To clear a memory field, first recall a label and then press î.

LT Momentum AUS.indd 17 19-03-2007 09:13:41

Caring for Your Labelmaker

Your labelmaker is designed to give you long and trouble-free

service, while requiring very little maintenance. Clean your

labelmaker from time to time to keep it working properly. Clean the

cutter blade each time you replace the label cassette.

To clean the cutter blade

Press in and hold

1. Dampen a cotton ball with alcohol.

2. Remove the label cassette.

3. Place the tip of a ball-point pen or

pencil on the black post as shown in

Figure 6, and press the post down.

Print head

Figure 6

4. While holding down the post, press and

hold the cutter lever to expose the cutter blade.

5. Release the post and clean both sides of the blade with the

cotton ball.

6. Release the cutter lever.

Ç You can also follow this procedure if the cutter blade becomes

lodged in the forward position and will not move.

LT Momentum AUS.indd 18 19-03-2007 09:13:42

To clean the print head

1. Remove the label cassette.

2. Remove the cleaning tool from inside the label compartment

cover.

3. Gently wipe the padded side of the tool across the print head.

See Figure 6.

LT Momentum AUS.indd 19 19-03-2007 09:13:42

Troubleshooting

Review the following possible solutions if you encounter a problem

while using your labelmaker.

Problem/Error Message Solution

No display • Ensure the labelmaker is turned on.

• Replace discharged batteries.

Poor Print Quality • Replace batteries or attach power adapter.

• Ensure label cassette is installed properly.

• Clean the print head.

• Replace the label cassette.

Poor Cutter Performance

Clean the cutter blade. See Caring for Your

Labelmaker.

Printing

No action required.

Message disappears when printing is finished.

Too many characters

Exceeded maximum number of

characters in buffer.

Delete some or all of the buffer text.

Battery low

Batteries almost discharged.

Replace batteries or connect AC power adapter.

Tape Jam

Motor is stalled due to label jam.

• Remove jammed label; replace label cassette.

• Clean cutter blade.

If you still need assistance, contact DYMO Customer Support. See

Contacting Customer Support at the back of this User Guide to

locate the contact number for your country.

LT Momentum AUS.indd 20 19-03-2007 09:13:42

La pagina sta caricando ...

Dymo LT-100T Manuale utente

Marca: Dymo

Modello: LT-100T

Categoria: Stampanti per etichette

Tipo: Manuale utente

Questo manuale è adatto anche per

Scarica il pdf

rapporto

in altre lingue

English: Dymo LT-100T User manual

Dymo LT-100T Manuale utente

Questo manuale è adatto anche per

Dymo LT-100T Manuale utente

in altre lingue

Documenti correlati

Altri documenti