Lenovo 41U3074 - Laser Mouse Manuale utente

Combined Mouse User’s Guid e

Second Edition (January 2007)

Portions © Copyright International Business Machines Corporation 2005.

U.S. GOVERNMENT USERS – RESTRICTED RIGHTS: Our products and/or services are provided with

RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to the GSA ADP Schedule

contract with Lenovo Group Limited, if any, or the standard terms of this commercial license, or if the agency is

unable to accept this Program under these terms, then we provide this Program under the provisions set forth in

Commercial Computer Software–Restricted Rights at FAR 52.227-19, when applicable, or under Rights in

Data-General, FAR 52.227.14 (Alternate III).

Contents

About this book . . . . . . . . . . .v

Chapter 1. Lenovo Laser Mouse . . . 1-1

Product Description . . . . . . . . . . . 1-1

Installing the Mouse Suite Software . . . . . . 1-1

Installing the Mouse . . . . . . . . . . . 1-1

Using the Mouse . . . . . . . . . . . . 1-2

Solving USB problems . . . . . . . . . . 1-3

Caring for the mouse . . . . . . . . . . . 1-4

Chapter 2. 800 DPI Optical 3-Button

ScrollPoint PS/2 and USB Mouse . . . 2-1

Product Description . . . . . . . . . . . 2-1

Installing the Mouse Suite Software . . . . . . 2-1

Installing the Mouse . . . . . . . . . . . 2-1

Using the Mouse . . . . . . . . . . . . 2-2

Solving USB problems . . . . . . . . . . 2-3

Caring for the mouse . . . . . . . . . . . 2-3

Chapter 3. 800 DPI Optical 3-Button

ScrollPoint Pro Mouse PS/2 and USB . 3-1

Product Description . . . . . . . . . . . 3-1

Installing the Mouse Suite software . . . . . 3-1

Using the mouse . . . . . . . . . . . . 3-2

Solving problems with USB connectivity . . . 3-3

Caring for the mouse . . . . . . . . . . . 3-3

Chapter 4. Optical 3-Button Travel

Wheel Mouse with 800 DPI for PS/2

and USB . . . . . . . . . . . . . . 4-1

Product Description . . . . . . . . . . . 4-1

Installing the Mouse Suite Software . . . . . 4-1

Installing the Mouse . . . . . . . . . . . 4-1

Using the mouse . . . . . . . . . . . . 4-2

Solving USB problems . . . . . . . . . 4-3

Chapter 5. USB Optical Wheel Mouse 5-1

Introduction . . . . . . . . . . . . . . 5-1

Installing the Mouse Suite Software . . . . . 5-1

Installing the Mouse . . . . . . . . . . . 5-1

Using the mouse . . . . . . . . . . . 5-2

Appendix A. Service and Support . . . A-1

Registering your option . . . . . . . . . .A-1

Online technical support . . . . . . . . .A-1

Telephone technical support . . . . . . . .A-1

Appendix B. Lenovo Statement of

Limited Warranty . . . . . . . . . . B-1

Warranty information . . . . . . . . . . . B-4

Guarantee supplement for Mexico . . . . . . B-5

Appendix C. Notices . . . . . . . . C-1

Recycling information . . . . . . . . . . C-2

Electronic emission notices . . . . . . . . . C-2

Federal Communications Commission (FCC)

Declaration of Conformity . . . . . . . . C-2

Trademarks . . . . . . . . . . . . . . C-4

iv Combined Mouse User’s Guide

About this book

This combination manual contains instructions for installing and using the Laser Mouse, 800 DPI Optical

3-Button ScrollPoint

®

PS/2 and USB Mouse, 800 DPI Optical 3-Button ScrollPoint Pro Mouse PS/2 and

USB, Optical 3-Button Travel Wheel Mouse with 800 DPI for PS/2 and USB, and the USB Optical Wheel

Mouse.

vi Combined Mouse User’s Guide

Chapter 1. Lenovo Laser Mouse

This Chapter contains installation, usage, and maintenance information for the Lenovo Laser Mouse.

Product Description

The Lenovo Laser Mouse includes a TiltWheel to control vertical and horizontal scrolling and other

functions. The mouse includes a PS/2 and USB connector and can be connected to any enabled USB port.

The mouse works with computers that use the following operating systems:

v Microsoft

®

Windows

®

2000 Professional with Service Pack 4

v Microsoft Windows XP with Service Pack 2

v Microsoft Windows Vista

™

v Operating systems that support USB connectivity

This package contains:

v One Lenovo Laser Mouse.

v One CD-ROM containing installation software and an online User’s Manual

v One USB to PS/2 adapter

Installing the Mouse Suite Software

Included in your package is a CD-ROM containing installation software for the mouse. To install the

Mouse Suite Software:

1. Turn on the computer and start the operating system.

2. Insert the Device Driver CD into your CD-ROM drive. Click the Driver arrow. Follow the on-screen

instructions on your screen. If the setup program does not open, go to steps 3-6. If the setup program

opens, go to step 6.

3. Click Start.

4. Click Run.

5. In the command line, type X:/setup where X is the drive letter for your CD-ROM drive.

6. Click OK.

7. Follow the on-screen instructions to complete the Mouse Suite software installation.

Note: When you are prompted, click PS/2 if you will be connecting the mouse to the standard mouse

connector or click USB you will be using the mouse with a USB connector.

Installing the Mouse

This section contains information for installing the mouse in PS/2 mode and in USB mode.

If a PS/2 mouse is plugged into your computer, you must first turn off your computer prior to removing

this mouse. Plug in your mouse and restart your computer. If a message displays indicating that you do

not have a PS/2 mouse connected, ignore the message and continue.

Installing the mouse in PS/2 mode

To install the mouse using the Windows 2000, Windows XP, or Windows Vista operating system, do the

following:

1. Turn off your computer.

2. Remove any mouse that is connected to the PS/2 connector.

3. Insert the mouse with the PS/2 adapter into the mouse connector on the computer.

4. Restart the computer.

Installing the mouse in USB mode

To install the mouse using the USB connector in Microsoft Windows 2000 Professional, do the

following:

1. Insert the USB (rectangular) connector from the mouse into the USB connector on the computer.

2. In the Add New Hardware Wizard window, press the Enter key.

3. In the What do you want Windows to do? window, select Search for the best driver for your device.

4. Press the Enter key.

5. In the Windows will search for new drivers window, press the Enter key. Your computer will display

the location of the driver.

6. Press the Enter key. The Windows has finished installing the software that your new hardware device

requires window opens.

7. Press the Enter key to complete the installation.

See

“Using the mouse” for further information.

USB Installation (Windows XP)

To install the mouse in USB mode in a computer using Windows XP do the following:

Note: Do not connect the mouse to a USB connector on a ThinkPad

®

or other notebook computer until

you see the Windows XP desktop.

1. Connect the mouse USB connector to the computer USB connector.

2. The New Hardware Found window will open stating, Windows is installing the software for your

new hardware. Windows XP will automatically install the proper device drivers to operate your new

mouse.

Using the Mouse

The Lenovo Laser Mouse has multiple functions and features such as Zoom and Auto-scrolling, which

help you to increase your productivity. You can also change the mouse resolution or assign frequently

used functions or shortcuts to the mouse buttons by using the tabs in the Mouse Suite Software.

To start the Mouse Suite Software:

1. Click Start-->Settings-->Control Panel.

2. The Control Panel window opens. Double-click the Mouse icon. (If you have already enabled Show

Mouse Icon in the system tray option in the Mouse Suite properties of the Control Panel, double-click

the Mouse icon in the Windows System Tray located in the lower right-hand corner of your screen.)

By default the mouse buttons are assigned various functions, such as primary Mouse Button, Context

Menu, and Quick/Auto scroll. You can customize or change these button functions. To customize the

function of each button, do the following:

1.

Open the Mouse Suite Control Panel.

2. Click the Buttons tab.

3. On the Mouse Image, click the button you want to assign a new function, or select a button from the

Button list. The selected button will be displayed in the Button list and highlighted on the mouse

image.

4. Select a function from the Function list (at least one mouse button must be designated as the Primary

Mouse Button)

5. To reset your mouse buttons to the default setting, click Use Default.

1-2 Combined Mouse User’s Guide

6. To confirm your button settings, click Apply.

For further information on customizing the settings click the Help button located in the lower right

hand corner of the Mouse Suite software interface.

Lenovo

Laser Mouse supports the mouse resolution adjustment from minimum 400 DPI to maximum

2000 DPI to provide various selections for different applications. By default the mouse resolution setting

at 800DPI, to change the setting, do the following:

1. Open the Mouse Suite Control Panel.

2. Click the Resolution tab.

3. Select the corresponding resolution setting radio button to preferred mouse resolution.

4. To confirm your setting, click Apply. For further information on mouse resolution settings click the

Help button located in the lower right hand corner of the Mouse Suite software interface.

Note:

Mouse resolution adjustment function only available when Lenovo Laser Mouse work under USB

mode. When use under PS/2 mode, the mouse resolution setting freezes at 800 DPI.

Solving USB problems

This section contains information on solving problems with USB connectivity.

Note: There have been some cases where a computer has USB connectors, but the BIOS does not support

them. Contact your computer manufacturer to find out how to upgrade the BIOS.

The Lenovo Laser Mouse does not respond.

v Make sure that your computer is turned on when you perform the installation. Try disconnecting, and

re-connecting the mouse.

v Be sure you are not running Microsoft Windows NT

®

. This operating system does not support USB

connectivity for this device.

v If you have Windows 2000, make sure that all the USB switches in the BIOS are enabled.

To

check whether all the USB connectors are enabled, do the following:

v Access your computer Setup program during startup. Press F1, F2, or the Delete Key during startup. If

you are unsure how to access the Setup program for your computer, see the documentation that came

with your computer, or contact the manufacturer.

v Check the USB connectors in the setup program to sure that all USB connectors are functioning

properly. If you are not sure how to use the Setup program for your computer, refer to the

documentation that came with your computer, or contact the manufacturer.

USB (Universal Serial BUS) Controller Re-detection

The USB (Universal Serial BUS) Controller might not be properly installed in your computer.

1. Double-click My Computer.

2. Double-click Control Panel.

3. Double-click System.

4. Using the left mouse button, click the Device Driver tab.

5. Scroll down until you find Universal Serial Bus Controllers. Then using the left mouse button click

the plus (+) sign to change it to a minus (-) sign.

6. Using the left mouse button, click the Remove button located on the lower right-hand corner of the

device manager. A warning you are about to remove this device from your system window opens.

7. Click OK.

8. Click the Refresh button so Windows is forced to re-detect the hardware.

Chapter 1. Lenovo Laser Mouse 1-3

Click the Refresh button so Windows is forced to re-detect the hardware. This procedure detects

both the USB Host Controller and the USB Root Hub. You might be asked to insert the Microsoft

Windows installation CD.

Caring for the mouse

Always disconnect the mouse before cleaning. Keep beverages away from the mouse working area and

avoid any spills. The maintenance of your Lenovo Laser Mouse will ensure longer life, and will

minimize the chances of causing damage to your mouse and computer. There are no user serviceable

parts.

1-4 Combined Mouse User’s Guide

Chapter 2. 800 DPI Optical 3-Button ScrollPoint PS/2 and USB

Mouse

This guide contains installation, usage, and maintenance information for the 800 DPI Optical 3-Button

ScrollPoint

®

PS/2 and USB Mouse.

Product Description

The 800 DPI Optical 3-Button ScrollPoint PS/2 and USB Mouse includes a ScrollPoint to control scrolling

and other functions. The mouse includes a PS/2 and USB connector and can be connected to any enabled

USB port.

The mouse works with computers that use the following operating systems:

v Microsoft

®

Windows

®

2000 Professional

v Microsoft Windows XP

v Microsoft Windows Vista

™

v Operating systems that support USB connectivity

v PS/2 ports on computers using the Microsoft Windows NT

®

Workstation operating system.

This package contains:

v One 800 DPI Optical 3-Button ScrollPoint PS/2 and USB Mouse.

v One CD-ROM containing installation software and an online User’s Manual

v One USB to PS/2 adapter

Installing the Mouse Suite Software

Included in your package is a CD-ROM containing installation software for the mouse. To install the

Mouse Suite Software:

1. Turn on the computer and start the operating system.

2. Insert the Device Driver CD into your CD-ROM drive. Click the Driver arrow. Follow the on-screen

instructions on your screen. If the setup program does not open, go to steps 3-6. If the setup program

opens, go to step 6.

3. Click Start.

4. Click Run.

5. In the command line, type X:/setup where X is the drive letter for your CD-ROM drive.

6. Click OK.

7. Follow the on-screen instructions to complete the Mouse Suite software installation.

Note: When you are prompted, click PS/2 if you will be connecting the mouse to the standard mouse

connector or click USB if you will be using the mouse with a USB connector.

Installing the Mouse

This section contains information for installing the mouse in PS/2 mode and in USB mode.

If a PS/2 mouse is plugged into your computer, you must first turn off your computer prior to removing

this mouse. Plug in your mouse and restart your computer. If a message displays indicating that you do

not have a PS/2 mouse connected, ignore the message and continue.

Installing the mouse in PS/2 mode

To install the mouse using the Windows NT Workstation operating system, do the following:

1. Turn off your computer.

2. Remove any mouse that is connected to the PS/2 connector.

3. Insert the mouse with the PS/2 adapter into the mouse connector on the computer.

4. Restart the computer.

Installing the mouse in USB mode

To install the mouse using the USB connector in Microsoft Windows 2000 Professional, do the

following:

1. Insert the USB (rectangular) connector from the mouse into the USB connector on the computer.

2. In the Add New Hardware Wizard window, press the Enter key.

3. In the What do you want Windows to do? window, select Search for the best driver for your device.

4. Press the Enter key.

5. In the Windows will search for new drivers window, press the Enter key. Your computer will display

the location of the driver.

6. Press the Enter key. The Windows has finished installing the software that your new hardware device

requires window opens.

7. Press the Enter key to complete the installation.

See

“Using the mouse” for further information.

USB Installation (Windows XP)

To install the mouse in USB mode in a computer using Windows XP do the following:

Note: Do not connect the mouse to a USB connector on a ThinkPad or other mobile computer until you

see the Windows XP desktop.

1. Connect the mouse USB connector to the computer USB connector.

2. The New Hardware Found window will open stating, Windows is installing the software for your

new hardware. Windows XP will automatically install the proper device drivers to operate your new

mouse.

Using the Mouse

The 800 DPI Optical 3-Button ScrollPoint PS/2 and USB Mouse has multiple functions and features such

as Zoom and Auto-scrolling, which help you to increase your productivity. You can also assign frequently

used functions or shortcuts to the mouse buttons by using the tabs in the Mouse Suite Software.

To start the Mouse Suite Software:

1. Click Start-->Settings-->Control Panel.

2. The Control Panel window opens. Double-click the Mouse icon. (If you have already enabled Show

Mouse Icon in the system tray option in the Mouse Suite properties of the Control Panel, double-click

the Mouse icon in the Windows System Tray located in the lower right-hand corner of your screen.)

By default the mouse buttons are assigned various functions, such as primary Mouse Button, Context

Menu, and Quick/Auto scroll. You can customize or change these button functions. To customize the

function of each button, do the following:

1. Open the Mouse Suite Control Panel.

2. Click the Buttons tab.

3. On the Mouse Image, click the button you want to assign a new function, or select a button from the

Button list. The selected button will be displayed in the Button list and highlighted on the mouse

image.

2-2 Combined Mouse User’s Guide

4. Select a function from the Function list (at least one mouse button must be designated as the Primary

Mouse Button).

5. To reset your mouse buttons to the default setting, click Use Default.

6. To confirm your button settings, click Apply.

For further information on customizing the settings click the Help button located in the lower right

hand corner of the Mouse Suite software interface.

Solving USB problems

This section contains information on solving problems with USB connectivity.

Note: There have been some cases where a computer has USB connectors, but the BIOS does not support

them. Contact your computer manufacturer to find out how to upgrade the BIOS.

The 800 DPI Optical 3-Button ScrollPoint PS/2 and USB Mouse does not respond.

v Make sure that your computer is turned on when you perform the installation. Try disconnecting, and

re-connecting the mouse.

v Be sure you are not running Microsoft Windows NT . This operating system does not support USB

connectivity for this device.

v If you have Windows 2000, make sure that all the USB switches in the BIOS are enabled.

To

check whether all the USB connectors are enabled, do the following:

v Access your computer Setup program during startup. Press F1, F2, or the Delete Key during startup. If

you are unsure how to access the Setup program for your computer, see the documentation that came

with your computer, or contact the manufacturer.

v Check the USB connectors in the setup program to sure that all USB connectors are functioning

properly.

If you are not sure how to use the Setup program for your computer, refer to the documentation that

came with your computer, or contact the manufacturer.

USB (Universal Serial BUS) Controller Re-detection

The USB (Universal Serial BUS) Controller might not be properly installed in your computer.

1. Double-click My Computer.

2. Double-click Control Panel.

3. Double-click System.

4. Using the left mouse button, click the Device Driver tab.

5. Scroll down until you find Universal Serial Bus Controllers. Then using the left mouse button click

the plus (+) sign to change it to a minus (-) sign.

6. Using the left mouse button, click the Remove button located on the lower right-hand corner of the

device manager. A Warning you are about to remove this device from your system window opens.

7. Click OK.

8. Click the Refresh button so Windows is forced to re-detect the hardware.

This procedure detects both the USB Host Controller and the USB Root Hub. You might be asked to

insert the Microsoft Windows installation CD.

Caring for the mouse

Always disconnect the mouse before cleaning. Keep beverages away from the mouse working area and

avoid any spills. The maintenance of your 800 DPI Optical 3-Button ScrollPoint PS/2 and USB Mouse

will ensure longer life, and will minimize the chances of causing damage to your mouse and computer.

There are no user serviceable parts.

Chapter 2. 800 DPI Optical 3-Button ScrollPoint PS/2 and USB Mouse 2-3

2-4 Combined Mouse User’s Guide

Chapter 3. 800 DPI Optical 3-Button ScrollPoint Pro Mouse

PS/2 and USB

This guide contains installation, usage, and maintenance information for the 800 DPI Optical 3-Button

ScrollPoint

®

Pro Mouse PS/2 and USB.

Product Description

The 800 DPI Optical 3-Button ScrollPoint Pro Mouse PS/2 and USB includes a ScrollPoint to control

scrolling and other functions. The mouse includes a PS/2 and USB connector and can be connected to

any enabled USB port.

The mouse works with computers that use the following operating systems:

v Microsoft

®

Windows

®

2000 Professional

v Microsoft Windows XP

v Microsoft Windows Vista

™

v Operating systems that support USB connectivity

v PS/2 ports on computers using the Microsoft Windows NT

®

Workstation operating system.

This package contains:

v An 800 DPI Optical 3-Button ScrollPoint Pro Mouse PS/2 with a USB connector

v CD-ROM containing installation software for the 800 DPI Optical 3-Button ScrollPoint Pro Mouse PS/2

and USB online User’s Manual

v A USB to PS/2 adapter

Installing the Mouse Suite software

Included in your package is a CD-ROM containing installation software for the mouse. To install the

Mouse Suite Software:

1. Turn on the computer and start Windows.

2. Insert the Device Driver CD into your CD-ROM drive. Click the Driver arrow. Follow the on-screen

instructions on your screen. If the setup program does not open, go to steps 3-6. If the setup program

opens, go to step 6.

3. Click Start.

4. Click Run.

5. In the command line, type X:/setup where X is the drive letter for your CD-ROM drive. For example,

if the letter of your CD-ROM drive is (E:)type E\:Setup.

6. Click OK.

7. Follow the onscreen instructions to complete the Mouse Suite software installation.

Note: When you are prompted to select an interface, click PS/2 if you will be connecting the mouse

to the standard mouse connector or click USB interface if you will be connecting the mouse to a USB

connector.

The Mouse Suite Software installation is complete. Go to Installing the Mouse.

Installing the Mouse

This section contains information installing the mouse in PS/2 mode and in USB mode.

Installing the mouse in PS/2 Mode

1. Turn off your computer.

2. Remove any mouse that is connected to the PS/2 connector.

3. Insert the mouse with the PS/2 adapter into the mouse connector on the computer.

4. Restart the computer.

Installing the mouse in USB mode

If you are currently using a PS/2 mouse, you must first turn off your computer prior to removing this

mouse. At this time you can plug in your mouse and restart your computer. If a message displays

indicating that you do not have a PS/2 mouse connected, ignore the message and continue.

Installing the mouse in USB mode using Windows 2000:

1. Plug the USB (rectangular) connector from the mouse into the USB connection on the computer. The

Found New Hardware window will open, followed by the Add New Hardware Wizard window.

2. Press The Enter key. The ″What do you want Windows to do″ window opens.

3. Select Search for the best driver for your device.

4. Press the Enter key. The Windows will search for new drivers window opens.

5. Press the Enter key. Your computer will display the location of the driver.

6. Press the Enter key. The Windows has finished installing the software that your new hardware device

requires window opens.

7. Press the Enter key to complete the installation.

USB Installation (Windows XP)

To install the mouse in USB mode in a computer using Windows XP do the following:

Note: Do not connect the mouse to a USB connector on a ThinkPad computer until the Windows XP

desktop displays.

1. Plug the mouse connector into the computer USB connector.

2. The New Hardware Found window will open stating, Windows is installing the software for your

new hardware. Windows XP will automatically install the proper device drivers to operate your new

mouse.

Using the mouse

The 800 DPI Optical 3-Button ScrollPoint Pro Mouse PS/2 and USB, has multiple functions and features

such as Zoom and Auto-scrolling, which help you to increase your productivity. You can also assign

frequently used functions or shortcuts to the mouse buttons by using the tabs in the Mouse Suite

Software.

To Launch the Mouse Suite Software:

1. Click Start-->Settings-->Control Panel.

2. The Control Panel window opens. Double-click the Mouse icon. (If you have already enabled Show

Mouse Icon in the system tray option in the Mouse Suite properties of the Control Panel, double-click

the Mouse icon in the Windows System Tray located in the lower right-hand corner of your screen.)

By

default the mouse buttons are assigned various functions, such as primary Mouse Button, Context

Menu, and Quick/Auto scroll. You can customize or change these button functions. To customize the

function of each button:

1. Open the Mouse Suite Control Panel.

2. Click the Buttons tab.

3. On the Mouse Image, click the button you want to assign a new function, or select a button from the

Button list. The selected button will be displayed in the Button list and highlighted on the mouse

image.

4. Select a function from the Function list (at least one mouse button must be designated as the Primary

Mouse Button).

3-2 Combined Mouse User’s Guide

5. To reset your mouse buttons to the default setting, click Use Default.

6. To confirm your button settings, click Apply.

For further information on customizing the settings click the Help button located in the lower right

hand corner of the Mouse Suite software interface.

Solving problems with USB connectivity

This section contains information on solving problems with USB connectivity.

Note: There have been some cases where a computer has the physical USB ports, but the BIOS does not

support them. You will need to contact your computer manufacturer to upgrade the BIOS.

The 800 DPI Optical 3-Button ScrollPoint Pro Mouse PS/2 and USB does not respond.

v Make sure that your computer is turned on. You might have connected your 800 DPI Optical 3-Button

ScrollPoint Pro Mouse PS/2 and USB while your computer was shut down. Try disconnecting, and

re-connecting the 800 DPI Optical 3-Button ScrollPoint Pro Mouse PS/2 and USB.

v Be sure you are not running Windows NT since these operating systems do not support USB.

v If you are using Windows 2000, make sure that all the USB switches in the BIOS are enabled. To enable

the USB port, you must run your computer Setup program by pressing one of the following during the

boot sequence: F1, F2, or the Delete key. If you are not sure how to run the Setup program for your

computer, refer to the documentation that came with your computer, or contact your computer’s

manufacturer.

USB (Universal Serial BUS) Controller Re-detection

The USB (Universal Serial BUS) Controller might not be properly installed in your computer.

1. Double-click My Computer.

2. Double-click Control Panel.

3. Double-click System.

4. Using the left mouse button, click the Device Driver tab.

5. Scroll down until you find Universal Serial Bus Controllers. Then using the left mouse button click

the plus (+) sign to change it to a minus (-) sign.

6. Using the left mouse button, click the Remove button located on the lower right-hand corner of the

device manager. A Warning you are about to remove this device from your system window opens.

7. Click OK.

8. Click the Refresh button so Windows is forced to re-detect the hardware.

This procedure detects both the USB Host Controller and the USB Root Hub. You might be asked to

insert the Microsoft Windows installation CD.

Caring for the mouse

Always disconnect the mouse before cleaning. Keep beverages away from the mouse working area and

avoid any spills. The maintenance of your 800 DPI Optical 3-Button ScrollPoint Pro Mouse PS/2 and

USB will ensure longer life, and will minimize the chances of causing damage to your mouse and

computer. There are no user serviceable parts.

Chapter 3. 800 DPI Optical 3-Button ScrollPoint Pro Mouse PS/2 and USB 3-3

3-4 Combined Mouse User’s Guide

La pagina si sta caricando...

Lenovo 41U3074 - Laser Mouse Manuale utente

Questo manuale è adatto anche per

Lenovo 41U3074 - Laser Mouse Manuale utente

in altre lingue

Documenti correlati

Altri documenti