Kenwood TYPE KVL85 Istruzioni per l'uso

TYPE KVC85

TYPE KVL85

Instructions

Istruzioni

Instrucciones

Bedienungsanleitungen

Gebruiksaanwijzing

Instrukcja obsługi

Instruções

English 2 - 13

Nederlands 14 - 26

Français 27 - 39

Deutsch 40 - 53

Italiano 54 - 66

Português 67 - 79

Español 80 - 91

Dansk 92 - 103

Svenska 104 - 115

Norsk 116 - 127

Suomi 128 - 139

Türkçe 140 - 151

Česky 152 - 163

Magyar 164 - 175

Polski 176 - 188

Eλληνικά 189 - 203

Slovenčina 204 - 215

Українська 216 - 228

ÝY

pqw - pp

5L

KVC85 Chef

11 – Bowls

KVL85 Chef XL

3.5L

7L

5L

10 – Easy weigh scales

b ca

13

11

12

2

3

414

15

16

18

17

19

5

1

9

10

7

6

8

A

B

C

D

A B C

D E F

G H I

J K L

To Use Your Stand Mixer

To Use the Weighing Function

V W X

To Assemble the Creaming Beater

M N O

To Fit And Use Your Splashguard Tool Adjustment

P Q R

To Fit and Remove the Head Cap

S T U

Know Your Kenwood Stand Mixer

Congratulations on buying a Kenwood. With such a wide range of attachments available,

it is more than just a mixer. It is a state-of-the-art Stand Mixer. We hope you will enjoy it.

Robust. Reliable. Versatile. Kenwood.

2

Safety

ORead these instructions carefully and retain for

future reference.

ORemove all packaging and any labels.

OIf the plug or cord is damaged it must, for safety

reasons, be replaced by Kenwood or an authorised

Kenwood repairer in order to avoid a hazard.

OTurn the speed control to ‘O’ OFF position

and unplug before fitting or removing tools/

attachments, after use and before cleaning.

O

Keep body parts, hair and jewellery and loose clothing

away from moving parts and fitted attachments.

ONever leave the Stand Mixer unattended when it is

operating.

ONever use a damaged appliance. Get it checked or

repaired: see ‘Service and Customer Care’ section.

ONever operate the Stand Mixer with the head in the

raised position.

ONever put your fingers into the hinge mechanism.

ONever let the cord hang down where a child could

grab it.

ONever let the power unit, cord or plug get wet.

ONever use an unauthorised attachment or more than

one attachment at once.

ONever exceed the quantities stated in the maximum

capacity chart

OWhen using an attachment, read and follow the

safety instructions that are supplied with it.

OTake care when lifting this appliance as it is heavy.

Ensure the head is correctly latched in the down

position and that the bowl, tools, outlet covers and

cord are secure before lifting.

OTake care when removing bowl tools after extended

use as they may get hot.

English

OChildren should be supervised to ensure that they

do not play with the appliance.

ODo not move or raise the mixer head with an

attachment fitted as the Stand Mixer could become

unstable.

OWhen moving the appliance always pick up by the

pedestal base and mixer head. Do not lift or carry

the appliance by the bowl handle.

ODo not operate your appliance near the edge or

overhanging the work surface or apply force to an

attachment when fitted, as this may cause the unit

to become unstable and tip over, which may result

in injury.

OThe short power-supply cord is used to reduce risk

resulting from becoming entangled in or tripping.

Extension cords may be used if care is exercised in

their use. If an extension cord is used: 1) The marked

electrical rating of the extension cord should be

at least as great as the electrical rating of the

appliance; and 2) The cord should be arranged so

that it will not drape over the countertop or tabletop

where it can be pulled on by children or tripped

over unintentionally. 3) The extension cord should

be an earthed-type 3-wire cord. The electrical rating

of the appliance is listed on the bottom of the unit.

OAppliances can be used by persons with reduced

physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given

supervision or instruction concerning use of the

appliance in a safe way and if they understand the

hazards involved.

OMisuse of your appliance can result in injury.

OThis appliance shall not be used by children. Keep

the appliance and its cord out of reach of children.

OThe maximum rating is based on the mini chopper/

mill attachment that draws the greatest load. Other

attachments may draw less power.

3

KVC85 only

ONever use the splashguard with the 3.5L bowl.

Splashguard only suitable for use with the 5L bowl

ODo not fit a bowl tool to the stand mixer when the

3.5L bowl is stacked in the 5L bowl.

OFor kneading bread dough use the 5L bowl only.

KVL85 only

ONever use the splashguard with the 5L bowl.

Splashguard only suitable for use with the 7L bowl

ODo not fit a bowl tool to the stand mixer when the

5L bowl is stacked in the 7L bowl.

OFor kneading bread dough use the 7L bowl only.

OOnly use the appliance for its intended domestic

use. Kenwood will not accept any liability if the

appliance is subject to improper use, or failure to

comply with these instructions.

Before plugging in

O Make sure your electricity supply is the same as the one shown on the underside of your

appliance.

O This appliance conforms to EC Regulation 1935/2004 on materials and articles intended

to come into contact with food.

Before Using For The First Time

O Wash the parts: see ‘Care and

Cleaning’ section.

Key

Attachment Outlets

1 High-speed outlet

2 Slow-speed outlet

3 Bowl tool socket

Mixer

4 High speed outlet cover

5 Mixer head

6 Mixer ready indicator light

7 Speed control dial

8 Head release lever

9 Power unit

10 Easyweigh scales

a display screen

b On/Zero button

c kg/lb button

11 Bowls

12 Slow speed outlet cover

13 Head Cover

14 K-beater

15 Whisk

16 Dough tool

17 Creaming beater

18 Spatula

19 Splashguard

Note: Spanner shown is for illustration

purposes only and is not supplied in

pack.

4

Optional Attachments

There are a range of optional

attachments available to use with

your Stand Mixer. See the attachment

leaflet included in your pack or visit

www.kenwoodworld.com to see the full

range and how to buy an attachment

not included in your pack.

Note: Slow Speed Outlet Attachments

The slow speed outlet on your Stand

Mixer model features the Twist

Connection System. It is designed

to accept Twist Connection System

attachments.

When purchasing new attachments for

the slow speed outlet you should check

compatibility with your Stand Mixer. All

Twist Connection System attachments

can be identified by the product code

which starts with KAX and also by

the Twist logo which is visible on

packaging. For more information visit

www.kenwoodworld.com/twist.

If you own attachments featuring the

Bar Connection System you will

need to use the KAT002ME adaptor to

connect these to the Twist Connection

System on your Stand Mixer.

For more information visit

www.kenwoodworld.com/twist.

To Use Your Stand Mixer

Refer to Illustrations A – I

1 Push the head-lift lever down and

raise the mixer head until it locks.

2 Fit the bowl, turn clockwise to lock.

3 Place the required tool into the

socket. Then push up and turn the

tool to lock into position.

Note: If the K-beater or Whisk are

not picking up ingredients from the

bottom of the bowl refer to the “Tool

Adjustment” section.

4 Lower the mixer head by pushing the

head release lever down and lower

the mixer head until it locks.

5 Plug into the power supply. Start

the machine by turning the speed

control to the desired speed setting.

Use the pulse (P) position for short

bursts of maximum speed.

6 After use, return the speed control

to ‘O’ OFF position and unplug your

Stand Mixer.

7 Release the tool by turning clockwise

to unlock from the tool socket and

then remove.

Hints

O The fold function can be used for

folding light ingredients into heavier

mixtures for example meringues,

mousses, fruit fools, Genoese

sponges and soufflés, and to slowly

incorporate flour and fruit into cake

mixtures. The mixer will operate at a

constant slow speed.

Important

Ensure that no bowl tools are fitted or

stored in the bowl when using other

outlets.

5

To Use The Weighing

Function

Refer to Illustrations J – L

1 Fit the bowl.

2 Press the on/zero button, the display

screen will flash ---- followed by 0.

3 Press the (kg/lb) button to select

either grams or ounces. The display

will default to kg/g when first

switched on.

* The unit weighs in 1g increments

and teaspoon/tablespoon measures

are recommended for weighing small

quantities.

* To zero press the on/zero button once.

4 Weigh the required ingredients

straight into the bowl.

Note: Always place the appliance on a

dry, flat, stable surface prior to weighing.

Do not apply pressure to the mixer or

bowl whilst weighing as this will affect

the accuracy of the scales. The weighing

function can be used with the mixer

head in either the down or up position.

Count up timer

O During operation the display screen

will automatically operate as a count

up timer.

O The timer will count up to 30

minutes and will pause (for up to 30

secs) when ever the speed control is

turned to the 'O' position.

O To reset the timer to zero when the

machine is running press the ON/

ZERO button.

6

Recommended Usage Chart

• This is for guidance only and will vary depending on the exact recipe and

ingredients being processed.

K-beater

For making cakes, biscuits, pastry, icing, ﬁllings, eclairs and mashed

potato.

Hints and Tips

• To avoid splashing of ingredients gradually increase the speed.

• To fully incorporate the ingredients, stop mixing and scrape down

the bowl with the spatula frequently.

• Use cold ingredients for pastry unless your recipe says otherwise.

Recipe/ Process

(Max) (Minutes)

KVC85 Chef

KVL85 Chef XL

3.5 L *5 L *5 L 7 L

Pastry &

Biscuits –

rubbing fat into

flour

Flour

Weight

340g

680g

500g 910g Min 12

All In one cake

mixes

Total

Weight

800g 2kg 2kg 4kg Min 145 – 60 secs

Creaming Beater

For creaming and mixing soft ingredients.

Hints and Tips

• To avoid splashing of ingredients gradually increase the speed.

• When creaming fat and sugar for cake mixes, always use the fat at

room temperature or soften it ﬁrst.

Recipe/ Process

(Max) (Minutes)

KVC85 Chef

KVL85 Chef XL

3.5 L *5 L *5 L 7 L

Creaming butter/

margarine and sugar

890g 2.6kg 1.8kg 4.5kg Min 

Max

4

Beating eggs into cake

mixes

Min 

Max

1 – 4

Folding in flour, fruit etc Min 130 – 60 secs

Eggs sizes used = medium sized (Weight 53 – 63g).

* Lower max capacity when using 5L bowl on KVL85 machine. This is due to using

smaller capacity bowl with the Chef XL size bowl tools.

7

Recommended Usage Chart

• This is for guidance only and will vary depending on the exact recipe and ingredients

being processed.

• For best results, always use soft room temperature butter and margarine when

making cakes.

Whisk

For eggs, cream and soufflés.

Important

• To avoid splashing of ingredients gradually increase the speed.

•

Do not use the whisk for heavy mixtures (all in one cakes and

creaming fat & sugar) as you could damage it.

• Best results achieved when eggs are at room temperature.

Before whisking egg whites, make sure there is no grease or egg yolk

on the whisk or the bowl.

Recipe/ Process

(Max) (Minutes)

KVC85 Chef KVL85 Chef XL

3.5 L *5 L *5 L 7 L

Egg Whites 6

(210g)

12

(420g)

8

(280g)

16

(560g) Min Max

1½ - 2

Fatless Sponge 620g 930g 620g 930g 4-6

Cream 0.35L 1L 0.5L 2L Min 4-6 1 ½ - 3

Mayonnaise

• For best results

scrape down the

bowl after the

addition of the

oil and run for a

further 10 secs at

max speed.

2 Egg Yolks

10g Mustard

200mls Vegetable Oil

Max 1 – 1 ½

Pancake Batter

• Add ﬂour to

the bowl ﬁrst,

followed by the wet

ingredients.

• Mix on minimum

speed to

incorporate

ingredients.

250g Flour

500g Milk

200g Eggs

‘Min’ speed

for 10

secs. Then

increase to

max speed

for 45 – 60

secs

1

Eggs sizes used = medium sized (Weight 53 – 63g).

Whipping cream used = Fresh Whipping cream with minimum 38% Fat content.

* Lower max capacity when using 5L bowl on KVL85 machine. This is due to using smaller

capacity bowl with the Chef XL size bowl tools.

8

Recommended Usage Chart

• This is for guidance only and will vary depending on the exact recipe and ingredients

being processed.

Dough Tool

For yeasted dough mixes

Hints and Tips

Important

• Use the largest bowl supplied with your machine for kneading

dough.

KVC85 - 5L Bowl

KVL85 - 7L Bowl

• Never exceed the maximum capacities and speeds stated – you

may overload the machine.

• If you hear the machine labouring, switch o, remove half the dough

and do each half separately.

• The ingredients mix best if you put the liquid in ﬁrst.

Yeast

• Dried Yeast (the type that needs reconstituting): pour the warm

water into the bowl. Then add the yeast and sugar and leave to

stand for 10 minutes until frothy.

• Fresh yeast: crumble into the ﬂour

• Other types of yeast: follow the manufacturer’s instructions.

Put the dough into a greased polythene bag or a bowl covered with a

tea towel. Then leave somewhere warm until doubled in size.

Recipe/ Process

(Max) (Minutes)

KVC85 Chef

*5L Bowl

KVL85 Chef XL

7L Bowl

Min Max Min Max

Bread Dough

(stiff yeasted)

Warm Water 195g 755g 195g 895g Min

1

60 secs

3-4

Strong White

Bread Flour

350g 1.36kg 350g 1.6kg

Fast Action

Yeast

6g 22g 6g 25g

Lard 10g 27g 10g 30g

Salt 3g 14g 3g 16g

Total Weight 564g 2.18kg 564g 2.56kg Re-knead

Speed 1

60 secs

Soft yeasted

dough

(enriched with

butter and

eggs)

Flour Weight 250g 1.3kg 250g 1.6kg Min

1

60 secs

3-4

Total Weight 478g 2.5kg 478g 3.1kg

Re-knead

Speed 1

60 secs

Eggs sizes used = medium sized (Weight 53 – 63g).

9

To Fit And Use Your

Splashguard

Refer to Illustrations M – N

1 Raise the mixer head until it locks.

2 Fit the bowl onto the base.

3 Push the splashguard onto the

underside of the mixer head until fully

located. The hinged section should be

positioned as shown.

4 Insert required tool.

5 Lower the mixer head.

O During mixing, ingredients can be

added directly to the bowl via the

hinged section of the splashguard.

O You do not need to remove the

splashguard to change tools.

6 Remove the splashguard by raising

the mixer head and pushing it down.

Tool Adjustment

Refer to Illustrations O

K-beater & Whisk

The tools are set to the correct height

for the bowl supplied in the factory and

should not require adjustment.

However, if you wish to adjust the tool

use a suitable sized spanner:

TYPE KVC85 = 15mm

TYPE KVL85 = 19mm

Then follow the instructions below:

1 Unplug the appliance.

2 Raise the mixer head and insert the

whisk or beater.

3 Lower the mixer head. If the

clearance needs to be adjusted,

raise the mixer head and remove the

tool. Ideally the whisk and K-beater

should be almost touching the

bottom of the bowl.

4 Using a suitable spanner loosen the

nut sufficiently to allow adjustment

of the shaft. To lower the tool closer

to the bottom of the bowl, turn the

shaft anti-clockwise. To raise the tool

away from the bottom of the bowl

turn the shaft clockwise.

5 Re-tighten the nut.

6 Fit the tool to the mixer and lower

the mixer head. (Check its position

see points above).

7 Repeat the above steps as necessary

until the tool is set correctly. Once

this is acheived tighten the nut

securely.

O Note: Spanner shown is for

illustration purpose only.

Dough Tool

This tool is set at the factory and should

require no adjustment.

To Fit and Remove Head

Cover

Refer to Illustrations P – U

1 Remove the slow speed and high

speed outlet covers.

2 With the retention clip pressed in, lift

up the head cover and slide forward.

3 To fit an alternate head cover, insert

the pegs on the end of the head

cover into the two holes on the slow

speed outlet.

4 Whilst pressing the retention clip,

push the head cover down into place

on the mixer head.

5 Replace slow speed and high speed

outlet covers.

To Assemble The Creaming

Beater

Refer to Illustrations V – X

Fitting The Wiper Blade

O The wiper blade is supplied already

fitted and should always be removed

before cleaning.

1 Carefully fit the flexible wiper blade

onto the tool by locating the base

of the wiper blade into the slot then

fit one side into the groove before

gently hooking the end in place.

Repeat with the other side.

10

Care & Cleaning

l Always switch off and unplug before

cleaning.

l A little grease may appear at the

slow speed outlet 2 when you first

use it. This is normal – just wipe it off.

Power Unit, Outlet Covers and Head

Cover

l Wipe with a damp cloth, then dry.

l Never use abrasives or immerse in

water.

Bowls

l Wash by hand, then dry thoroughly

or wash in the dishwasher.

l Never use a wire brush, steel wool

or bleach to clean your stainless

steel bowl. Use vinegar to remove

limescale.

l Keep away from heat (cooker tops,

ovens, microwaves).

Tools & Splashguard

l Wash by hand, then dry thoroughly

or wash in the dishwasher.

Recipe

Prune Marinade

185g Clear Runny Honey

25g Soft Prunes

25ml Water

1 Place all ingredients into the mini

chopper/mill. Refrigerate overnight.

2 Fit the attachment to the Stand

mixer.

3 Switch to pulse for 6 seconds.

4 Use as required.

Service and Customer Care

l If you experience any problems with the operation of your appliance, before

requesting assistance refer to the ‘Troubleshooting Guide’ section in the manual or

visit www.kenwoodworld.com.

l Please note that your product is covered by a warranty, which complies with all legal

provisions concerning any existing warranty and consumer rights in the country where

the product was purchased.

l If your Kenwood product malfunctions or you find any defects, please send it or bring

it to an authorised KENWOOD Service Centre. To find up to date details of your

nearest authorised KENWOOD Service centre visit www.kenwoodworld.com or the

website specific to your Country.

l Designed and engineered by Kenwood in the UK.

l Made in China.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN

ACCORDANCE WITH THE EUROPEAN DIRECTIVE ON WASTE ELECTRICAL AND

ELECTRONIC EQUIPMENT (WEEE)

At the end of its working life, the product must not be disposed of as urban waste. It must

be taken to a special local authority differentiated waste collection centre or to a dealer

providing this service.

11

Troubleshooting Guide

Problem Cause Solution

The whisk, K-beater

knocks against the

bottom of the bowl

or not reaching the

ingredients in the

bottom of the bowl.

Tool at the wrong height

and needs adjusting.

Adjust the height using a

suitable spanner – see “Tool

Adjustment” section.

Slow speed attachment

cannot be fitted.

Check your attachment is

compatible for use with

your model.

Twist connection system

required (Model KAX)

Attachment must have the KAX

twist connection system to

fit the outlet.

If you own attachments

featuring the Bar Connection

System you will need to

use the KAT002ME adaptor

to connect these to the Twist

Connection System on your

Stand Mixer.

For more information visit

www.kenwoodworld.com/twist.

‘Mixer ready indicator

light’ flashing when

Stand Mixer first

plugged in.

Speed control not in the ‘O’

position.

Mixer head in the raised

position or not locked

down correctly.

Check and turn speed control to

the ‘O’ position.

Check Stand Mixer head is

locked down correctly.

The Stand Mixer stops

during operation.

Weighing display

shows error message

E26 or E27.

Overload protection or

overheat system activated.

Maximum capacity

exceeded.

Unplug and check for

obstruction or overloading.

Turn the speed control to “O”

and then restart.

If the machine will not operate,

remove some of the ingredients

to reduce the load and restart.

If this still does not resolve the

problem, unplug and allow to

stand for 15 minutes. Plug in

and reselect the speed.

If the machine does not restart

following the above procedure

contact “ customer care” for

further advice.

‘Mixer ready indicator

light’ o whilst machine

plugged in.

Stand Mixer has been left

plugged in for more than

30 minutes without being

operated and has

gone into Standby mode.

Turn the speed control to ‘min’

then return to ‘O’ to reset the

machine.

12

Troubleshooting Guide - Continued

Problem Cause Solution

Weighing Function

Display screen freezes

on [- - - -]

The display screen will

freeze during operation.

Display screen showing

a minus reading due to

display not ‘zeroed’ and

either ingredients or the

bowl has been removed.

Quantity weighed too

small.

Normal operation.

Either zero the screen or

replace the missing ingredients

or reﬁt the bowl.

Use teaspoon and tablespoon

measures for very small

quantities.

Weight changed on

display

Stand Mixer moved during

operation.

Always place the Stand Mixer

on a dry ﬂat surface prior to

weighing.

Do not move the Stand

Mixer during operation of the

weighing function.

Zero the display before

weighing next ingredients

Display screen turned

o

Stand Mixer unplugged.

The display screen will

turn o automatically if

the same weight reading is

shown after 5 minutes.

Plug appliance in.

Press the ON/ZERO button

once and the display screen will

light up.

Display showing

[0 – Ld]

Weighing function

overloaded

Excessive force applied to

Stand Mixer.

Do not exceed the maximum

weighing capacity of 6Kg.

Do not subject the Stand Mixer

to excessive force as this may

damage the weighing sensor.

13

Kennismaking met de Kenwood keukenmachine

U bent de gelukkige eigenaar van een Kenwood. Dankzij het grote assortiment

beschikbare hulpstukken, is deze machine veel meer dan zomaar een mixer. Het is een

geavanceerde keukenmachine. We hopen dat u er veel plezier van zult hebben.

Robuust. Betrouwbaar. Veelzijdig. Kenwood.

Nederlands

Veiligheid

O Lees deze instructies zorgvuldig door en bewaar ze

voor toekomstig gebruik.

O Verwijder alle verpakking en labels.

OAls de stekker of het snoer beschadigd is, moet het

om veiligheidsredenen door Kenwood of een door

Kenwood geautoriseerd reparatiebedrijf vervangen

worden, om gevaar te voorkomen.

O Zet de snelheidsregeling op ‘O’ (uit) en haal de

stekker uit het stopcontact voordat u hulpstukken

monteert of verwijdert, zowel na het gebruik als

voor de reiniging.

O Houd lichaamsdelen, haar, sieraden en loszittende

kleding uit de buurt van bewegende delen en

geïnstalleerde hulpstukken.

O Laat de keukenmachine nooit onbeheerd aan staan.

O Gebruik nooit een machine die beschadigd is. Laat

de machine controleren of repareren: raadpleeg het

deel ‘Onderhoud en klantenservice’.

O Zet de keukenmachine nooit aan als de kop omhoog

staat.

O

Steek uw vingers, enz. nooit in het scharniermechanisme.

O Laat het snoer nooit overhangen, zodat een kind

erbij kan.

O Zorg ervoor dat het motorgedeelte, het snoer en de

stekker nooit nat worden.

O Gebruik nooit een hulpstuk dat niet goedgekeurd is

en gebruik nooit meer dan één hulpstuk per keer.

O Overschrijd nooit de hoeveelheden die staan

vermeld op de tabel met de maximumcapaciteiten.

O Als u een hulpstuk gebruikt, dient u de

meegeleverde veiligheidsinstructies te lezen en op

te volgen.

Vouw de voorpagina a.u.b. uit voordat u begint te lezen.

Op deze manier zijn de afbeeldingen zichtbaar

14

O Wees voorzichtig wanneer u de machine optilt. Hij

is zwaar. Zorg ervoor dat de kop omlaag staat en

vergrendeld is, en dat de kom, de hulpstukken, de

contactdeksels en het snoer vast zitten, voordat u

de machine optilt.

O Wees voorzichtig bij het verwijderen van de

komhulpstukken na langdurig gebruik, omdat ze

heet kunnen zijn.

O Kinderen mogen de machine alleen onder toezicht

gebruiken, om te voorkomen dat ze ermee spelen.

O Verplaats de machine niet en haal de Mixerkop niet

omhoog als een hulpstuk aangebracht is, omdat de

keukenmachine dan instabiel kan worden.

O Bij het verplaatsen van het apparaat altijd oppakken

bij de voet en de mengkop. Het apparaat NIET

optillen of dragen aan de komgreep.

O Gebruik uw apparaat niet in de buurt van de rand of

overhangend werkoppervlak en oefen geen kracht

uit op een vastgemaakte bevestiging, omdat dit

ertoe kan leiden dat het apparaat instabiel wordt en

kantelt, wat kan resulteren in verwondingen.

O Het snoer is kort om risico op verstrengeling of

struikelen te voorkomen. Een verlengsnoer kan

gebruikt worden, maar wees voorzichtig. Als u

een verlengsnoer gebruikt: 1) zorg ervoor dat

het aangegeven vermogen van het verlengsnoer

minstens gelijk is aan het vermogen van het

apparaat. 2) zorg ervoor dat het snoer niet over

het aanrecht of de tafel hangt waar kinderen

eraan kunnen trekken of over kunnen struikelen. 3)

het verlengsnoer moet geaard zijn en drie aders

hebben. Het vermogen staat onder op het apparaat

vermeld.

O Dit apparaat kan worden gebruikt door personen

met verminderde lichamelijke, sensorische of

geestelijke capaciteiten of gebrek aan ervaring en

kennis mits ze onder toezicht staan of instructie

hebben gekregen over het veilig gebruik van het

apparaat en de betrokken risico’s begrijpen.

O Misbruik van uw apparaat kan tot letsel leiden.

15

O Dit apparaat mag niet door kinderen worden

gebruikt. Houd het apparaat en het snoer buiten het

bereik van kinderen.

ODe maximale beoordeling is gebaseerd op de

mini-hakmolen / molenhulpstuk dat de grootste

belasting trekt. Andere hulpstukken kunnen minder

stroom verbruiken.

Alleen voor KVC85

O Gebruik het spatscherm nooit met de kom van 3,5

liter. Spatscherm is alleen geschikt voor de 5 liter

kom.

O Plaats geen komhulpstukken in de mixer als de

kleinere kom van 3,5 liter in de grotere kom van 5

liter zit.

O Voor het kneden van brooddeeg alleen de kom van

5 liter gebruiken.

Alleen voor KVL85

O Gebruik het spatscherm nooit met de kom van 5

liter. Spatscherm is alleen geschikt voor de 7 liter

kom.

O Plaats geen komhulpstukken in de mixer als de

kleinere kom van 5 liter in de grotere kom van 7 liter

zit.

O Voor het kneden van brooddeeg alleen de kom van

7 liter gebruiken.

O Gebruik het apparaat alleen voor het huishoudelijke

gebruik waarvoor het is bedoeld. Kenwood kan

niet aansprakelijk worden gesteld in het geval dat

het apparaat niet correct is gebruikt, of waar deze

instructies niet worden opgevolgd.

Voordat u de stekker in het stopcontact steekt

O Zorg dat de elektriciteitsvoorziening dezelfde spanning heeft als op de onderkant van het

apparaat wordt aangegeven.

O Dit apparaat voldoet aan EG Verordening 1935/2004 inzake materialen en voorwerpen

die bestemd zijn om met levensmiddelen in contact te komen.

Voordat u de machine voor het eerst gebruikt

O Lees het deel ‘Onderhoud en reiniging’, voordat u de onderdelen gaat schoonmaken.

16

La pagina sta caricando ...

Kenwood TYPE KVL85 Istruzioni per l'uso

Kenwood TYPE KVL85 Istruzioni per l'uso

in altre lingue

Documenti correlati