Yamaha VX110 Sport WaveRunner 2006 Manuale utente

SERVICE MANUAL

VX110 Sport

WaveRunner

F1K-28197-1H-11LIT-18616-02-91

*LIT186160291*

VX110 Deluxe

E

NOTICE

This manual has been prepared by Yamaha primarily for use by Yamaha dealers and their trained

mechanics when performing maintenance procedures and repairs to Yamaha equipment. It has

been written to suit the needs of persons who have a basic understanding of the mechanical and

electrical concepts and procedures inherent in the work, for without such knowledge attempted

repairs or service to the equipment could render it unsafe or unfit for use.

Because Yamaha has a policy of continuously improving its products, models may differ in detail

from the descriptions and illustrations given in this publication. Use only the latest edition of this

manual. Authorized Yamaha dealers are notified periodically of modifications and significant

changes in specifications and procedures, and these are incorporated in successive editions of this

manual.

A10001-0*

WaveRunner

VX110 Sport, VX110 Deluxe

SERVICE MANUAL

1st Edition, January 2005

Any reprinting or unauthorized use

without the written permission of

Yamaha Motor Corporation, USA

is expressly prohibited.

Printed in USA

LIT-18616-02-91

E

HOW TO USE THIS MANUAL

MANUAL FORMAT

All of the procedures in this manual are organized in a sequential, step-by-step format. The informa-

tion has been compiled to provide the mechanic with an easy to read, handy reference that contains

comprehensive explanations of all disassembly, repair, assembly, and inspection operations.

In this revised format, the condition of a faulty component will precede an arrow symbol and the

course of action required will follow the symbol, e.g.,

• Bearings

Pitting/scratches → Replace.

To assist you in finding your way through this manual, the section title and major heading is given at

the top of every page.

ILLUSTRATIONS

The illustrations within this service manual represent all of the designated models.

CROSS REFERENCES

The cross references have been kept to a minimum. Cross references will direct you to the appropri-

ate section or chapter.

E

IMPORTANT INFORMATION

In this Service Manual particularly important information is distinguished in the following ways.

The Safety Alert Symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS

INVOLVED!

WARNING

Failure to follow WARNING instructions could result in severe injury or death to the machine

operator, passenger(s), a bystander, or a person inspecting or repairing the watercraft.

CAUTION:

A CAUTION indicates special precautions that must be taken to avoid damage to the water-

craft.

NOTE:

A NOTE provides key information to make procedures easier or clearer.

IMPORTANT:

This part has been subjected to change of specification during production.

E

HOW TO USE THIS MANUAL

1 To help identify parts and clarify procedure steps, there are exploded diagrams at the start of

each removal and disassembly section.

2 Numbers are given in the order of the jobs in the exploded diagram.

3 Symbols indicate parts to be lubricated or replaced (see “SYMBOLS”).

4 A job instruction chart accompanies the exploded diagram, providing the order of jobs, names of

parts, notes in jobs, etc.

5 Dimension figures and the number of parts, are provided for fasteners that require a tightening

torque.

Example:

Bolt or screw size : M10 (D) × 25 mm (L)

6 Jobs requiring more information (such as special tools and technical data) are described

sequentially.

10 × 25 mm

D

L

E

A50001-1-4

SYMBOLS

Symbols 1 to 9 are designed to indicate the

content of a chapter.

1

General Information

2

Specifications

3

Periodic Inspection and Adjustment

4

Fuel System

5

Power Unit

6

Jet Pump Unit

7

Electrical System

8

Hull and Hood

9

Trouble Analysis

Symbols 0 to E indicate specific data.

0

Special service tool

A

Specified oil or fluid

B

Specified engine speed

C

Specified tightening torque

D

Specified measurement

E

Specified electrical value

(resistance, voltage, electric current)

Symbols F to I in an exploded diagram indi-

cate the grade of lubricant and the lubrication

point.

F

Apply Yamaha 4-stroke motor oil

G

Apply water resistant grease

(Yamaha grease A, Yamaha marine grease)

H

Apply ThreeBond 1104J or ThreeBond 1280B

I

Apply molybdenum disulfide grease

Symbols J to N in an exploded diagram indi-

cate the type of sealant or locking agent and

the application point.

J

Apply Gasket Maker

K

Apply LOCTITE 271 (red)

L

Apply LOCTITE 242 (blue)

M

Apply LOCTITE 572

N

Apply silicone sealant

NOTE:

Additional symbols may be used in this man-

ual.

12

34

56

78

90

AB

CD

EF

GH

IJ

KL

MN

GEN

INFO

SPEC

INSP

ADJ

FUEL

POWR

JET

PUMP

–+

ELEC

HULL

HOOD

TRBL

ANLS

T

R

.

E

A

1280B1104J

M

GM

271

LT

242

LT

572

LT

SS

E

INDEX

GENERAL INFORMATION

1

GEN

INFO

SPECIFICATIONS

2

SPEC

PERIODIC INSPECTION AND

ADJUSTMENT

3

INSP

ADJ

FUEL SYSTEM

4

FUEL

POWER UNIT

5

POWR

JET PUMP UNIT

6

JET

PUMP

ELECTRICAL SYSTEM

7

ELEC

HULL AND HOOD

8

HULL

HOOD

TROUBLE ANALYSIS

9

TRBL

ANLS

– +

A30000-0

E

GEN

INFO

1

2

3

4

5

6

7

8

9

CHAPTER 1

GENERAL INFORMATION

IDENTIFICATION NUMBERS .........................................................................1-1

PRIMARY l.D. NUMBER ...........................................................................1-1

ENGINE SERIAL NUMBER ......................................................................1-1

JET PUMP UNIT SERIAL NUMBER .........................................................1-1

HULL IDENTIFICATION NUMBER (H.l.N.)...............................................1-1

SAFETY WHILE WORKING......................................................................1-2

FIRE PREVENTION ..................................................................................1-2

VENTILATION ...........................................................................................1-2

SELF-PROTECTION.................................................................................1-2

PARTS, LUBRICANTS, AND SEALANTS ................................................1-2

GOOD WORKING PRACTICES ...............................................................1-3

DISASSEMBLY AND ASSEMBLY ............................................................ 1-4

SPECIAL SERVICE TOOLS ........................................................................... 1-5

MEASURING.............................................................................................1-5

REMOVAL AND INSTALLATION..............................................................1-7

1-1

E

GEN

INFO

IDENTIFICATION NUMBERS

A60700-0*

IDENTIFICATION NUMBERS

PRIMARY l.D. NUMBER

The primary l.D. number is stamped on a label

attached to the inside of the engine compart-

ment.

Starting primary l.D. number:

F1K: 800101

ENGINE SERIAL NUMBER

The engine serial number is stamped on a

label attached to the engine unit.

Starting serial number:

6D3: 1000001

JET PUMP UNIT SERIAL NUMBER

The jet pump unit serial number is stamped on

a label attached to the intermediate housing.

HULL IDENTIFICATION NUMBER

(H.l.N.)

The H.l.N. is stamped on a plate attached to

the aft deck.

1-2

E

GEN

INFO

SAFETY WHILE WORKING

To prevent and accident or injury and to

ensure quality service, follow the safety proce-

dures provided below.

FIRE PREVENTION

Gasoline is highly flammable.

Keep gasoline and all flammable products

away from heat, sparks, and open flames.

VENTILATION

Gasoline vapor and exhaust gas are heavier

than air and extremely poisonous. If inhaled in

large quantities they may cause loss of con-

sciousness and death within a short time.

When test running an engine indoors (e.g., in a

water tank), be sure to do so where adequate

ventilation can be maintained.

SELF-PROTECTION

Protect your eyes by wearing safety glasses or

safety goggles during all operation involving

drilling and grinding, or when using an air com-

pressor.

Protect your hands and feet by wearing protec-

tive gloves or safety shoes when necessary.

PARTS, LUBRICANTS, AND

SEALANTS

Use only genuine Yamaha parts, lubricants,

and sealants or those recommended by

Yamaha, when servicing or repairing the

watercraft.

1-3

E

GEN

INFO

SAFETY WHILE WORKING

Under normal conditions, the lubricants men-

tioned in this manual should not harm or be

hazardous to your skin. However, you should

follow these precautions to minimize any risk

when working with lubricants.

1. Maintain good standards of personal and

industrial hygiene.

2. Change and wash clothing as soon as

possible if soiled with lubricants.

3. Avoid contact with skin. Do not, for exam-

ple, place a soiled rag in your pocket.

4. Wash hands and any other part of the

body thoroughly with soap and hot water

after contact with a lubricant or lubricant

soiled clothing has been made.

5. To protect your skin, apply a protective

cream to your hands before working on the

watercraft.

6. Keep a supply of clean, lint-free cloths for

wiping up spills, etc.

GOOD WORKING PRACTICES

1.

The right tools

Use the recommended special service

tools to protect parts from damage. Use

the right tool in the right manner—do not

improvise.

2.

Tightening torques

Follow the tightening torque specifications

provided throughout the manual. When

tightening nuts, bolts, and screws, tighten

the large sizes first, and tighten fasteners

starting in the center and moving outward.

1-4

E

GEN

INFO

SAFETY WHILE WORKING

3.

Non-reusable parts

Always use new gaskets, seals, O-rings,

oil seals, cotter pins, circlips, etc., when

installing or assembling parts.

DISASSEMBLY AND ASSEMBLY

1. Use compressed air to remove dust and

dirt during disassembly.

2. Apply engine oil to the contact surfaces of

moving parts during assembly.

3. Install bearings with the manufacture iden-

tification mark in the direction indication in

the installation procedure. In addition, be

sure to lubricate the bearings liberally.

4. Apply a thin coat of water-resistant grease

to the lip and periphery of an oil seal

before installation.

5. Check that moving parts operate normally

after assembly.

1-5

E

GEN

INFO

SPECIAL SERVICE TOOLS

Using the correct special service tools recom-

mended by Yamaha, will aid the work and

enable accurate assembly and tune-up. Impro-

visations and using improper tools can dam-

age the equipment.

NOTE:

• For U.S.A. and Canada, use part numbers

starting with “J-”, “YB-”, “YM-”, “YS-”, “YU-” or

“YW-”.

• For other countries, use part numbers start-

ing with “90890-”.

MEASURING

1

Dial gauge stand

P/N. 90890-06583

2

Dial gauge needle

P/N. 90890-06584

3

Dial gauge stand set

P/N. YB-06585

90890-06585

4

Dial indicator gauge

P/N. YU-03097

Dial gauge set

P/N. 90890-01252

5

Pocket tester

P/N. YU-03112

90890-03112

6

Digital multimeter

P/N. YU-34899-A

7

Digital circuit tester

P/N. 90890-03174

8

Fuel pressure gauge adapter

P/N. YW-06842

90890-06842

9

Fuel pressure gauge

P/N. YB-06766

90890-06786

4

12

3

5

YU-03097 90890-01252

90890-06583 90890-06584

YB-06585

90890-06585

YU-03112

90890-03112

8

YW-06842

90890-06842

7

90890-03174

6

YU-34899-A

9

YB-06766 90890-06786

1-6

E

GEN

INFO

SPECIAL SERVICE TOOLS

0

Compression gauge extension

P/N. 90890-06582

A

Cylinder gauge set

P/N. YU-03017

90890-06759

B

Compression gauge

P/N. YU-33223-1

90890-03160

C

Peak voltage adapter

P/N. YU-39991

D

Peak voltage adapter B

P/N. 90890-03172

E

Spark checker

P/N. YM-34487

Ignition tester

P/N. 90890-06754

F

Test harness (2 pins)

P/N. New: YB-06867

Current: YB-06767

Test harness FWY-2 (2 pins)

P/N. New: 90890-06867

Current: 90890-06767

G

Test harness (3 pins)

P/N. New: YB-06870

Current: YB-06770

Test harness SMT250-3 (3 pins)

P/N. New: 90890-06870

Current: 90890-06770

H

Test harness (6 pins)

P/N. YB-06848

Test harness FSW-6A (6 pins)

P/N. 90890-06848

I

Test harness (3 pins)

P/N. New: YB-06877

Current: YB-06777

Test harness HM090-3 (3 pins)

P/N. New: 90890-06877

Current: 90890-06777

J

Lower unit pressure/vacuum tester

P/N. YB-35956-A

Vacuum/pressure pump gauge set

P/N. 90890-06756

0A

B

C

EF

GH

90890-06582 YU-03017

90890-06759

YU-33223-1 90890-03160

YU-39991 90890-03172

YM-34487

90890-06754

YB-06867 (-06767)

90890-06867 (-06767)

YB-06870 (-06770)

90890-06870 (-06770)

YB-06848

90890-06848

D

IJ

YB-06877 (-06777)

90890-06877 (-06777)

YB-35956-A

90890-06756

1-7

E

GEN

INFO

SPECIAL SERVICE TOOLS

K

Yamaha diagnostic system

P/N. 60V-85300-02-00

L

Yamaha diagnostic system

P/N. 60V-WS853-03

L

60V-WS853-03

K

60V-85300-02-00

REMOVAL AND INSTALLATION

1

Oil filter wrench

P/N. YB-01426

90890-01426

2

Coupler wrench

P/N. YW-06551

90890-06551

3

Sheave holder

P/N. YS-01880-A

90890-01701

4

Rotor puller

P/N. YM-01082

90890-01080

5

Universal magneto and rotor holder

P/N. YU-01235

Rotor holder

P/N. 90890-01235

6

Bearing housing needle bearing installer

(reduction drive gear)

P/N. YB-06111

12

34

YB-01426

90890-01426

YW-06551

90890-06551

YS-01880-A

90890-01701

YM-01082

90890-01080

56

YU-01235

90890-01235

YB-06111

1-8

E

GEN

INFO

SPECIAL SERVICE TOOLS

7

Forward gear bearing cup installer

(reduction drive gear)

P/N. YB-06276-B

8

Ball bearing attachment

(reduction drive gear)

P/N. 90890-06657

9

Valve spring compressor

P/N. YM-01253

90890-04019

0

Valve spring compressor attachment

P/N. YM-04114 (ø19 mm)

90890-04114 (ø19 mm)

YM-04108 (ø22 mm)

90890-04108 (ø22 mm)

A

Valve guide remover

P/N. YM-04111 (ø4.0 mm)

90890-04111 (ø4.0 mm)

YM-04116 (ø4.5 mm)

90890-04116 (ø4.5 mm)

B

Valve guide installer

P/N. YM-04112 (ø4.0 mm)

90890-04112 (ø4.0 mm)

YM-04117 (ø4.5 mm)

90890-04117 (ø4.5 mm)

C

Valve guide reamer

P/N. YM-04113 (ø4.0 mm)

90890-04113 (ø4.0 mm)

YM-04118 (ø4.5 mm)

90890-04118 (ø4.5 mm)

D

Valve seat cutter

Intake

P/N. 90890-06813 (60°)

90890-06814 (45°)

90890-06815 (30°)

Exhaust

P/N. 90890-06315 (60°)

90890-06312 (45°)

90890-06328 (30°)

0

A

YM-04114 (ø19 mm)

90890-04114 (ø19 mm)

YM-04108 (ø22 mm)

90890-04108 (ø22 mm)

YM-04111 (ø4.0 mm)

90890-04111 (ø4.0 mm)

YM-04116 (ø4.5 mm)

90890-04116 (ø4.5 mm)

7

YB-06276-B

8

9

90890-06657

YM-01253

90890-04019

B

C

YM-04112 (ø4.0 mm)

90890-04112 (ø4.0 mm)

YM-04117 (ø4.5 mm)

90890-04117 (ø4.5 mm)

YM-04113 (ø4.0 mm)

90890-04113 (ø4.0 mm)

YM-04118 (ø4.5 mm)

90890-04118 (ø4.5 mm)

90890-06315 (60°)

90890-06312 (45°)

90890-06328 (30°)

D

90890-06813 (60°)

90890-06814 (45°)

90890-06815 (30°)

1-9

E

GEN

INFO

SPECIAL SERVICE TOOLS

E

Valve seat cutter holder

P/N. 90890-06811 (ø4.0 mm)

90890-06812 (ø4.5 mm)

F

Neway valve seat cutter kit

P/N. YM-91044

G

Piston ring compressor

P/N. YM-08037

90890-05158

H

Drive shaft holder (impeller)

P/N. YB-06151

Drive shaft holder 5 (impeller)

P/N. 90890-06519

I

Slide hammer and adapters

(jet pump bearing and reduction drive

gear)

P/N. YB-06096

J

Stopper guide plate (jet pump bearing)

P/N. 90890-06501

K

Bearing puller assembly

(jet pump bearing and reduction drive

gear)

P/N. 90890-06535

L

Stopper guide stand

(jet pump bearing and reduction drive

gear)

P/N. 90890-06538

M

Driver rod L3

(jet pump bearing and reduction drive

gear)

P/N. 90890-06652

N

Bearing housing needle bearing remover

(jet pump bearing)

P/N. YB-06112

O

Needle bearing attachment

(jet pump bearing, oil seal, and reduction

drive gear)

P/N. 90890-06614, 90890-06653

Ball bearing attachment

(jet pump oil seal)

P/N. 90890-06634

YM-08037 90890-05158

YB-06096

90890-06501 90890-06535

E

G

HI

JK

90890-06811 (ø4.0 mm)

90890-06812 (ø4.5 mm)

YB-06151

90890-06519

YM-91044

F

90890-06538 90890-06652

LM

YB-06112 90890-06614

NO

90890-06653

90890-06634

1-10

E

GEN

INFO

SPECIAL SERVICE TOOLS

P

Outer race installer—forward gear

(jet pump oil seal and reduction drive gear)

P/N. YB-06085

Q

Ball bearing attachment

(jet pump oil seal and reduction drive gear)

P/N. 90890-06631

R

Driver handle—large

(intermediate shaft, jet pump, and

reduction drive gear)

P/N. YB-06071

S

Driver rod LS

(intermediate shaft, jet pump, and

reduction drive gear)

P/N. 90890-06606

T

Crankshaft holder (intermediate shaft)

P/N. YB-06552

Crankshaft holder 20 (intermediate shaft)

P/N. 90890-06552

U

Bearing outer race attachment

(intermediate shaft and reduction drive

gear)

P/N. 90890-06624, 90890-06628

V

Roller bearing installer/remover

(intermediate shaft bearing and oil seals)

P/N. YB-06432

YB-06071 90890-06606

RS

YB-06552

90890-06552

T

YB-06085

P

90890-06631

Q

90890-06624YB-06156

U

90890-06626

YB-06432

V

La pagina sta caricando ...

Yamaha VX110 Sport WaveRunner 2006 Manuale utente

Questo manuale è adatto anche per

Yamaha VX110 Sport WaveRunner 2006 Manuale utente

in altre lingue

Documenti correlati

Altri documenti