KINGSLIM D1 Manuale utente

USER MANUAL

KINGSLIM D1 Dual Dash Cam

v1.0

01 - 14English

15 - 29Deutsch

30 - 43Español

44 - 58Français

59 - 72Italiano

73 - 86

What’s in the Box

Camera Overview

Product Operation

Installation

Formatting the microSD Card

Recording

Icon Introduction

Setup Menu

Download the GPS Player

Troubleshooting

Caution

Contact Us

2

3

4

8

9

10

13

14

CONTENTS

1

EN

WHAT'S IN THE BOX

2

D1 Dual Dash Cam * 1 Waterproof

Rear Camera * 1

Car Charger with

External GPS * 1

23ft Rear Camera

Extension Cable * 1

Bracket * 1

Screws * 2 Pry Tool * 1

Cable Clips * 5 Quick Start Guide * 1

Quick Start Guide

KingSlim D1 Dash Cam

V1.0

Double-Sided Adhesive Tape

for Rear Camera * 1

32GB microSD Card * 1

EN

3

CAMERA OVERVIEW

Mini USB Power Port

microSD Card Slot

Power Button

Bracket Slot Rear Camera In

Lens

ScreenWorking Indicator

EN

4

1. Power Button

Function 1: Press to wake up/turn oﬀ the screen.

Function 2: Long press to turn the camera on/oﬀ.

2. Menu Button

Function 1: Long press to enter the set-up menu.

Function 2: Press to switch the shooting mode/playback mode/recording mode.

Function 3: Press the menu button to lock the video during recording. Press the

menu button again to unlock.

Function 4: Press to exit the set-up menu.

3. OK Button

Function 1: Press to start/stop recording.

Function 2: In the shooting mode, press the OK button to shoot a photo.

Function 3: In the playback mode, press the OK button to start/stop videos.

Reset

Menu Button

Down Button

OK Button

Up Button

Microphone

PRODUCT OPERATION

EN

5

INSTALLATION

1. Insert the microSD card.

Tip: A Class 10 or higher microSD card is highly recommended for the dash cam.

The dash cam supports a microSD card up to 64GB. Please format your card in

the camera before using it in the dash cam.

4. Up Button

Function 1: In the set-up menu, press the up button to view the setting options.

Function 2: In the recording mode, press the up button to view the display modes.

Function 3: After pause recording, long press the up button to display the GPS

information.

5. Down Button

Function 1: In the set-up menu, press the down button to view the setting options.

Function 2: When recording, press the down button to turn audio on/oﬀ.

6. Working Indicator

Standby: The red and blue lights are on.

Recording during charging: The red light is on and the blue light is ﬂashing.

Recording when fully charged: The blue light is ﬂashing and the red light is oﬀ.

microSD

EN

6

3. Install the dash cam on the windshield.

First, clean the windshield with a dry cloth. Second, take the ﬁlm oﬀ the suction

cup and press the suction cup onto the windshield to make sure there is no air

inside the suction cup, and then rotate to secure the bracket.

4. Adjust the view angle of the dash cam to ensure a good view.

2. Insert the bracket into the bracket slot.

EN

7

5. Connect the USB power cable into the USB power port of the dash cam, then

plug the car charger into the cigarette lighter socket.

Cable clip

A-Pillar

GPS

6. Connect the rear camera to the dash cam with the extension cable to check

that the rear camera works well.

7. Install the rear camera.

Position 1: Install the rear camera on the rear windshield. This installation is easier.

EN

8

Position 2: Install the rear camera near the license plate. Position 2 is highly

recommended. The rear image is crisp and clear for both rear viewing and as a

back-up camera.

Note:

Pay attention to the connector position when connecting the rear camera with

the extension cable; please refer to the photo below.

Clean the area to ensure the optimum adhesion before installing the rear

camera.

If you choose position 1, clean the rear windshield regularly to ensure the image

quality.

If you choose position 2, install the rear camera with the included adhesive

stickers or screws.

8. Use the pry tool to hide the cables.

EN

9

FORMATTING THE MICROSD CARD

Use a high-speed microSD card of Class10 or higher. Format your microSD card in

the camera before putting it into the dash cam.

1. Long press the menu button to access the set-up menu.

2. Press the down button to view "format", then press the OK button.

3. Select "Conﬁrm" and then press the OK button.

RECORDING

1. After ﬁnishing formatting, connect a car charger and start the car engine.

The device will automatically turn on and begin recording.

2. Press the power button to turn on the device. Press the OK button to start

recording.

3. Every time you exit from the setting menu or playback menu, press the

OK button to start recording.

ICON INTRODUCTION

The Main Interface

Recording Resolution

GPS

Motion Detection

Gravity Sensor Indicator

Microphone Indicator

microSD Card Indicator

Power Status

Speed

Video Time

Date/Time

1

2

3

4

5

6

7

8

9

①

00 : 00 : 32 2021/01/20 08 : 02 : 30

1080FHD

70KM/H

1

2 3 4 6 7

8

910

EN

5

10

SETUP MENU

• Long press the menu button to enter the dash camera set-up menu.

• Press the up/down button to view the setting options. Select a setting option by

using the OK button.

• Press the menu button again to exit the set-up menu.

1. Resolution

Select "Resolution" and press the OK button to select the front camera recording

resolution of "1080FHD 1920×1080" or "720P 1280×720". The default setting is

"1080FHD 1920×1080". The rear camera recording resolution is "720P".

2. Loop Recording

When the microSD card is full, the new ﬁles will cover the old one if loop recording

is on. If it is oﬀ, the camera will not record anymore when the card is full. You will

then need to format the microSD card or change to a new one.

Options: Oﬀ/1 minute/3 minutes/5 minutes

Default Setting: 3 minutes

3. Photo Resolution

Set the photo resolution.

Options: 2M 1920×1080/5M 2592×1944/8M 3264×2448/12M 4032×3024

Default Setting: 2M 1920×1080

4. Video Audio

Sound will be recorded simultaneously with video.

Options: On and Oﬀ

Default Setting: On

5. Key Tone

Options: On and Oﬀ

Default Setting: On

EN

11

6. Date/Time

Set the date and time manually.

7. Date Stamp

Turn on the date stamp; recorded videos will show the time stamp.

Options: On and Oﬀ

Default Setting: On

8. Language Settings

Options: English/繁體中文/简体中文/日本語/Français/Deutsch/Polskie/ไทย/

Tiếng Việt/русский/Español/Italiana

Default Setting: English

9. Gravity Sensor

When the mode is turned on, it will automatically start recording and save content

if an impact or sudden braking is detected. The videos will be locked and will never

be overwritten by new ﬁles. The higher the sensitivity level, the easier it is to trigger

the emergency recording.

Options: Oﬀ/Low/Medium/High

Default Setting: Medium

10. Parking Monitoring

The camera will automatically turn on, begin the 22s recording, and lock if there is

an impact to the car during parking.

Options: On and Oﬀ

Default Setting: Oﬀ

11. UTC

Choose the time zone manually. The device will then display the time in the

selected time zone.

Default Setting: UTC-5

After changing the time zone, restart your dash cam and make sure the time and

date are now correct.

EN

12

12. Speed Unit

You can set the speed unit that you prefer.

Options: KM/H and MP/H

Default Setting: KM/H

13. Motion Detection

In standby mode, it will automatically start recording when motion is detected.

Options: On and Oﬀ

Default Setting: Oﬀ

14. License Plate Setting

Enter your license plate number.

Options: On and Oﬀ

Default Setting: Oﬀ

15. Screen Saver

The display screen will turn oﬀ automatically after the set duration of inactivity.

Options: On and Oﬀ

Default Setting: On

16. Auto Power Oﬀ

The dash cam will be turned oﬀ automatically after the time you set.

Options: Oﬀ/1 minute/3 minutes/5 minutes

Default Setting: Oﬀ

17. Source Frequency

Choose the right frequency to avoid ﬂickering. This should be based on your local

AC parameters.

Options: 60Hz/50Hz

Default Setting: 50Hz

EN

13

18. Format

Format the microSD card.

Note:

All data will be deleted. Before formatting your microSD card, please remember

to back up your important data on another device.

Before the microSD card is inserted for the ﬁrst time, please format it in the

camera to ensure that the card is compatible with the camera.

19. Reset

The dash cam will be reset to factory settings.

20. Version Number

Use this to check the version of the dash camera.

TROUBLESHOOTING

1. The dash cam is not recording.

• Check whether your microSD card has enough space. Back up any important

data to another device ﬁrst, and then format the microSD card.

• Check if the loop recording in the settings menu is set to OFF.

Set "Loop Record" to 3 minutes.

2. The dash cam stops during recording.

During recording, a large amount of high-deﬁnition video data is processed.

Please use a high-speed microSD card of Class 10 or higher.

3. A "File Error" prompt appears when playing back pictures and videos.

Use a genuine microSD card, and be sure to format it.

DOWNLOAD THE GPS PLAYER

Download the GPS player: www.kingslim.net/player

EN

14

CONTACT US

For any inquiries with KingSlim products, please feel free to contact us, we will

respond within 24 hours.

Email: [email protected]

Tel: 888-811-1140 (US) Mon-Fri (except holidays) 9am-5pm (EST)

Oﬃcial website: www.kingslim.net

CAUTION!

1. Please place your device in a secure location and protect the lens from

scratches and dirt.

2. Do not expose the device to rain, moisture, or water under any circumstances.

3. Avoid leaving the device in direct sunlight for extended periods of time.

4. Do not remove or expose the internal battery.

The microSD, microSDHC, microSDXC and SD marks and logos are trademarks

of SD-3C, LLC.

4. The image is misty.

Ensure there are no ﬁngerprints or other marks on the camera lens. Use a soft,

dry cloth to clean the lens. Clean the front windshield.

5. Crashing

If your device crashes, use a sharp object to press the reset button to restart the

device.

6. No sound on the video.

Ensure the audio recording mode is on.

7. The camera keeps turning on and oﬀ automatically.

Charge the camera with the included car charger. Do not charge the battery via

the USB data cable with other adapters.

EN

Verpackungsinhalt

Kameraübersicht

Produktbetrieb

Installation

Formatieren Sie die MikroSD-Karte

Aufzeichnung

Symboleinführung

Einstellmenü

Gps-abspielprogramm Herunterladen

Fehlersuche

Achtung!

Uns Kontaktieren

15

17

18

19

22

23

10

27

28

29

INHALT

15

DE

VERPACKUNGSINHALT

16

D1 Duale Dashcam * 1 Wasserfeste

Heckkamera * 1

Autoladegerät mit

externem GPS * 1

7m Verlängerungskabel

für Heckkamera * 1

Klammer * 1

Schrauben * 2

Hebelwerkzeug * 1Kabelschellen * 5

Schnellstartanleitung * 1

Quick Start Guide

KingSlim D1 Dash Cam

V1.0

Doppelseitiges Klebeband

für Heckkamera * 1

DE

17

KAMERAÜBERSICHT

Mini-USB-Stromanschluss

MikroSD-Karteneinschub

Hauptschalter

Klammern Heckkameraeingang

Linse

BildschirmBetriebsanzeige

DE

18

1. Hauptschalter

Funktion 1: Drücken Sie zum Aufwecken/Bildschirm einschalten.

Funktion 2: Drücken Sie langzeitig zum Ein- und Ausschalten der Kamera.

2. Menütaste

Funktion 1: Drücken Sie langzeitig, um das Einstellmenü aufzurufen.

Funktion 2: Drücken Sie zum Umschalten in den Aufnahme-/Wiedergabe-/

Aufzeichnungsmodus.

Funktion 3: Drücken Sie zum Sperren des Videos während der Aufzeichnung.

Drücken Sie nochmals die Menütaste zum Entsperren.

Funktion 4: Drücken Sie zum Verlassen des Einstellmenüs.

3. Bestätigungstaste

Funktion 1: Drücken Sie zum Aufzeichnungsstart/-stop.

Funktion 2: Drücken Sie im Aufnahmemodus die Bestätigungstaste, um ein Foto

aufzunehmen.

Funktion 3: Drücken Sie im Wiedergabemodus die Bestätigungstaste, um Videos

zu starten/anzuhalten.

Rückstelltaste

Menütaste

Abwärtstaste

Bestätigungstaste

Aufwärtstaste

Mikrofon

PRODUKTBETRIEB

DE

La pagina sta caricando ...

KINGSLIM D1 Manuale utente

KINGSLIM D1 Manuale utente

in altre lingue

Documenti correlati

Altri documenti