Segway-Ninebot KickScooter E Series (E22/E25/E45) Manuale del proprietario

Ninebot KickScooter

User Manual

Original Instructions

K014P0879-A0

www.segway.com

Producent zastrzega sobie prawo do wprowadzania zmian w produkcie, aktualizacji oprogramowania i aktualizacji tej

instrukcji obsługi w dowolnym momencie. Odwiedź stronę www.segway.com lub sprawdź aplikację, aby pobrać

najnowsze materiały użytkownika. Musisz zainstalować aplikację, aktywować swojego KickScootera i uzyskać

najnowsze aktualizacje i zasady bezpiecze stwa.

Thanks for choosing the Ninebot KickScooter (hereinafter referred to as KickScooter)!

Your KickScooter is a fashionable transportation device with mobile app, allowing you to connect with other riders.

Enjoy your ride and interact with riders worldwide!

This manual is applicable to the following models:

E22 series: E22 / E22D / E22E

E25 series: E25A / E25D / E25E

E45 series: E45 / E45D / E45E

Contents Thanks for choosing the Ninebot KickScooter!

4 Assembling Your KickScooter

5 Installing a Second Battery Pack (optional)

1 Riding Safety

2 Packing List

3 Diagram

6 First Ride

7 Charging

8 Learning to Ride

9 Warnings

11 Maintenance

13 Certiﬁcations

12 Speciﬁcations

10 Folding and Carrying

14 Trademark and Legal Statement

15 Contacts

02

04

05

06

07

08

09

11

15

17

15

20

23

WARNING!

Always use both electronic brake and foot brake for emergency stopping. Otherwise you risk falls and/or

collisions from not achieving the max. braking capability.

* The picture is for reference only. Please refer to the actual product for more details.

01

1 Riding Safety

1. The KickScooter is a recreational product. Before mastering riding skills, you need to practice. Neither Ninebot Inc. (means Ninebot

(Beijing)TechCo.,Ltd. and its subsidiaries and aﬃliates) nor Segway Inc. is responsible for any injuries or damage caused by a

rider's inexperience or failure to follow the instructions in this document.

2. Please understand that you can reduce the risk by following all the instructions and warnings in this manual, but you cannot

eliminate all the risks. Remember that whenever you ride the KickScooter you risk injury from loss of control, collisions, and falls.

When entering into public spaces always comply with the local laws and regulations. As with other vehicles, faster speeds require

longer braking distance. Sudden braking on low traction surfaces could lead to wheel slip, or falls. Be cautious and always keep a

safe distance between you and other people or vehicles when riding. Be alert and slow down when entering unfamiliar areas.

3. Always wear a helmet when riding. Use an approved bicycle or skateboard helmet that ﬁts properly with the chin strap in place, and

provides protection for the back of your head.

4. Do not attempt your ﬁrst ride in any area where you might encounter children, pedestrians, pets, vehicles, bicycles, or other

obstacles and potential hazards.

5. Respect pedestrians by always yielding the right of way. Pass on the left whenever possible. When approaching a pedestrian from

the front, stay to the right and slow down. Avoid startling pedestrians. When approaching from behind, announce yourself and slow

down to walking speed when passing. Please obey local traﬃc laws and regulations if situation is diﬀerent.

6. In places without laws, comply with the safety guidelines outlined in this manual. Neither Ninebot Inc. nor Segway Inc. is

responsible for any property damage, personal injury/death, accidents, or legal disputes caused by violations of the safety

instructions.

7. Do not allow anyone to ride your KickScooter on his/her own unless they have carefully read this manual and followed the New

Rider Tutorial in the App. The safety of new riders is your responsibility. Assist new riders until they are comfortable with the basic

operation of the KickScooter. Make sure each new rider wears a helmet and other protective gear.

8. Before each ride check for loose fasteners and damaged components. If the KickScooter makes abnormal sounds or signals an

alarm, immediately stop riding. Diagnose your KickScooter via the Segway-Ninebot App and call your dealer/distributor for service.

9. Be alert! Scan both far ahead and in front of your KickScooter — your eyes are your best tool for safely avoiding obstacles and low

traction surfaces (including, but not limited to, wet ground, loose sand, loose gravel, and ice).

10. To reduce risk of injury, you must read and follow all “CAUTION” and “WARNING” notices in this document. Do not ride at an unsafe

speed. Under no circumstance should you ride on roads with motor vehicles. The manufacturer recommends riders be 14+ years

old. Always follow these safety instructions:

A. People who should not ride the KickScooter include:

i. Anyone under the influence of alcohol or drugs.

ii. Anyone who suﬀers from disease that puts them at risk if they engage in strenuous physical activity.

iii. Anyone who has problems with balance or with motor skills that would interfere with their ability to maintain balance.

iv. Anyone whose weight is outside the stated limits (see Speciﬁcations).

v. Pregnant women.

B. Riders under the age of 18 years old should ride under adult supervision.

C. Comply with local laws and regulations when riding this product. Do not ride where prohibited by local laws.

D. To ride safely, you must be able to clearly see what is in front of you and you must be clearly visible to others.

E. Do not ride in the snow, in the rain, or on roads which are wet, muddy, icy, or that are slippery for any reason. Do not ride over

obstacles (sand, loose gravel, or sticks). Doing so could result in a loss of balance or traction and could cause a fall.

11. Do not attempt to charge your KickScooter if it, the charger, or the power outlet is wet.

12. As with any electronic device, use a surge protector when charging to help protect your KickScooter from damage due to power

surges and voltage spikes. Only use the Segway supplied charger. Do not use a charger from any other diﬀerent product models.

13. Use only Ninebot or Segway approved parts and accessories. Do not modify your KickScooter. Modiﬁcations to your KickScooter

could interfere with the operation of the KickScooter, result in serious injury and/or damage, and void the Limited Warranty.

14. Children should not play with the KickScooter or parts of it nor should cleaning or maintenance be done by children. The use of the

machine results in the transmission of vibrations throughout the driver's body.

15. Always place the KickScooter on its stand on a flat and stable surface. The KickScooter must be placed with the stand against the

slope to prevent it from tipping over. Never place the KickScooter with the front facing down the slope, as the stand may close and

tip the machine. Once the KickScooter is on its stand, check its stability to avoid any risk of falling (by slip, wind or slight jolt). Do

not park the KickScooter in a busy area, but rather along a wall. If possible, always choose to park your KickScooter on flat ground.

16. For a better driving experience, it is recommended to conduct a regular maintenance of the product.

17. Please read the user manual before charging the battery.

18. Do not touch the brake system, it could cause injuries.

19. The A-weighted emission sound pressure level is less than 70 dB(A). The mechanical vibrations transmitted by the KickScooter are

less than 2,5 m/s2.

02 03

3 Diagram

Rear fender/Foot brake

Insurance plate area*

* For E22D, E25D and E45D.

Magnetic Brake*

* For E25 and E45 series.

Folding pedal

Dashboard & Power button

Electronic throttle

Kickstand

Stem (battery cabin)

Hub motor

Reflector*

* For E22D, E22E, E25 and E45 series.

Headlight

Dashboard & Power button

Speedometer: Indicates the current speed. Also displays error codes when faults are detected.

Battery level: Indicates the remaining battery level with 5 bars. Each bar equates to approximately 20% power level.

Power mode:

—Red "S" icon: Sport mode (maximum power/speed).

—White "S" icon: Standard mode (moderate power/speed).

—No "S" icon: Speed limit mode (minimum power/speed).

Bluetooth: A blinking Bluetooth icon indicates that the vehicle is ready to connect. A solid Bluetooth icon indicates that the vehicle is

connected to a mobile device.

Power button: Short press to power on. Long press to power oﬀ. When powered on, press to turn on/oﬀ the headlight. Double-press to

change power mode.

Overheat tip: The thermometer icon always on indicates that the battery temperature has reached 122°F (50°C). At this point, the vehicle

cannot accelerate normally and may not be charged. Do not use it until the temperature is restored to normal range.

Error display: The lit wrench icon indicates the scooter error.

Electronic brake

Folding latch

Second Battery Pack*

* For E45 series.

Charge port

Reflector*

* For E22D, E22E,

E25 and E45 series.

Second battery port

2 Packing List

Handlebar Mainframe

When unboxing your KickScooter, please verify that the above items are included in the package. If any components are missing, please

contact your dealer/distributor or nearest service center (see Contacts in the user manual). After verifying that all components are

present and in good condition, you can assemble your new KickScooter.

Please retain the box and packaging materials in case you need to ship your KickScooter in the future.

Remember to power oﬀ your KickScooter and unplug the charge cable before assembling, mounting accessories, or cleaning the

mainframe.

Accessories

M5 Flathead Screw x 7

(one extra)

3mm Hex Wrench Battery Charger

User Materials

Second Battery Pack

QUICK STARTUSER MANUAL LIMITED WARRANTY

E22 series E25 series E45 series

Included

Sold separately

04 05

Bell

Power button

(multi-functional)

Bluetooth

Speedometer

Power mode

Overheat tip

Power level

Error display

4 Assembling Your KickScooter

3. Install six screws (two on each side) with the

included hex wrench.

4. Verify that your KickScooter powers on and oﬀ.

2. Firmly connect the wires inside the handlebar

and the stem. Slide the handlebar onto the

stem. Be aware of the correct orientation.

1. Unfold the stem and push it until you hear a

click. Flip up the folding pedal. Then unfold

the kickstand to support the scooter.

Note: Conﬁrm that the latching axis on the

folding mechanism is secured correctly.

3. Install the external battery on the rail and ﬁx it with the M4 (20mm)

screws (2 pcs) and M3 screw (1 pcs), provided with this product.

After they are properly installed, block the screw holes with the

rubber stopper.

2. Install the rail with the M4 (10mm) screws (3

pcs), provided with this product. Please make

sure it is properly ﬁxed.

4. Verify that your KickScooter powers on and oﬀ.

1. Remove the three screws on the stem. Then remove the

cover near the charge port and remove the M3 screw.

5 Installing a Second Battery Pack (optional)

06 07

Warning: please use the screws provided with

this product only.

Headlight

facing front

Latching Axis

7 Charging

8 Learning to Ride

Wear an approved helmet and other protective gear

to minimize any possible injury.

1. Power on the scooter and check the power

level. Charge the scooter if the battery level

is low.

6 First Ride There are safety risks when learning to ride the KickScooter. You must read the Riding

Safety via the App before your ﬁrst ride.

For your safety, your new KickScooter is not activated and will beep occasionally after

POWER ON.

Until activated, the KickScooter maintains a very low riding speed, and can not perform with

full function. Install the Segway-Ninebot App on your mobile device (with Bluetooth 4.0 and

above), connect to the KickScooter with Bluetooth, and follow the App instructions to

activate your KickScooter and enjoy the full performance.

Scan the QR code to download the App (iOS 9.0 and above, Android™ 4.3 and above).

Your KickScooter is fully charged when the LED on the charger changes from red (charging) to green (trickle charge).

Close the charge port cover when not charging.

2

1Install the Segway-Ninebot App and register/login.

3

4

Click “Vehicle” “Search vehicle” to connect to your

KickScooter.

The KickScooter will beep when it has successfully

connected.. The Bluetooth icon will stop blinking and

remain illuminated.

Follow the App instructions to activate the KickScooter and learn how to ride safely.

You can now start to use your KickScooter, check the status with the App, and interact with other users. Have fun!

WARNING

Do not connect the charger if the charge port or charge cable is wet. Do not charge or use your battery if it is damaged

or see trace of water.

Close the charge

port cover when

ﬁnished.

Open the charge

port cover.

Insert the

charge plug.

Charge port

Charging steps:

08 09

Power on the KickScooter. A blinking Bluetooth icon

indicates the KickScooter is ready to connect.

Charge port

(When used with

second battery)

Vehicle Fans Moments MeDiscover

Segway-Ninebot App

WARNING

When braking rapidly, you risk serious injury due to loss of traction and falls. Maintain a moderate speed and look out

for potential hazards.

3. Put your other foot on the foot deck to keep both

feet stable. Press the throttle to speed up when you

are balanced.

Note: For your safety, the motor will not engage

until the scooter reachs 2.5 mph (4 km/h)

4. Slow down by releasing the throttle. Squeeze

the electronic brake and stamp the rear

fender with foot at the same time for a

sudden brake.

2. Stand on the foot deck with one foot and

push oﬀ with another foot to start gliding.

5. To turn, shift your body and turn the

handlebar slightly.

Watch your head when passing

through doorways.

Watch your speed when traveling downhill. Use both

brakes together when traveling at high speed.

Keep your speed between 3.1–6.2 mph (5–10 km/h) when you ride

through speed bumps, elevator door stills, bumpy roads or other

uneven surfaces. Slightly bend your knee to better adjust

mentioned surfaces.

9 Warnings

DO NOT ride the

scooter in the rain.

WARNING

Failure to follow these instructions could lead to serious injury.

10 11

DO NOT rotate the handlebar violently

while driving at high speed.

DO NOT ride on public roads,

motorways, or highways.

Do not ride through puddles or any

other (water) obstacles. In such a case

please lower your speed and bypass

the obstacle.

The KickScooter is for one rider only.

Do not ride with another person. Do not

carry a child.

DO NOT press the throttle when walking

with the scooter.

DO NOT carry heavy objects on the

handlebar.

DO NOT ride the scooter with

only one foot.

Avoid contacting obstacles with the

tire/wheel.

12 13

11 Maintenance

Cleaning and Storage

Use a soft, wet cloth to wipe the mainframe clean. Hard to remove dirt can be scrubbed with a toothbrush and toothpaste, then cleaned

with a soft, wet cloth.

NOTE

Do not wash your KickScooter with alcohol, gasoline, acetone, or other corrosive/volatile solvents. These substances may damage the

appearance and internal structure of your KickScooter. Do not wash your KickScooter with a power washer or hose.

WARNING

Make sure the KickScooter is powered OFF, the charging cable is unplugged, and the rubber cap on the charge port is tightly sealed before

cleaning; otherwise you may damage the electronic components.

Store your KickScooter in a cool, dry place. Do not store it outdoors for extended periods of time. Exposure to sunlight and temperature

extremes (both hot and cold) will accelerate the aging process of the plastic components and may reduce battery life.

10 Folding and Carrying

Folding

Step on the folding pedal while pushing

the handlebar forward slightly.

Then fold the handlebar down

until it locks into the rear

fender.

When your KickScooter is

folded up, simply lift it by the

stem to carry.

DO NOT take your hands oﬀ the

handlebar while riding. Do not ride with

one hand only.

DO NOT ride up and down stairs or jump

over obstacles.

DO NOT touch the hub motor after riding

because it can get hot.

DO NOT step on the folding

pedal while riding.

WARNING

Always keep both hands on the handlebar or you risk serious injury due to loss of balance and falls.

14 15

Maintenance and removal of the battery

Do not remove the battery. Removing the battery is complicated and can alter the operation of the machine: You can contact an

authorized repairer if the product is still guaranteed. If the product is not guaranteed you can contact any specialized repairer of your

choice.You can ask for the list of the authorized repairers to the customer service available at www.segway.com. For any further question,

you can contact the customer service available at www.segway.com.

Do not store or charge the battery at temperatures outside the stated limits (see Speciﬁcations). Do not puncture the battery. Refer to

your local laws and regulations regarding battery recycling and/or disposal.A well maintained battery can perform well even after many

miles of riding. Charge the battery after each ride and avoid draining the battery completely.When used at room temperature (70°F

[22°C]) the battery range and performance is at its best; whereas using it at temperatures below 32°F (0°C) can decrease range and

performance. Typically, at -4°F (-20°C) range can be half that of the same battery at 70°F (22°C). Battery range will recover when

temperature rises. More details are available in the App.

Replace the Tires

Tires supplied with the product are to be mounted on the wheel by a professional repairer. Removing the wheels is complicated and

incorrect assembly can lead to instability and malfunctions:

– Please contact an authorized repairer if the product is still under manufacturer guarantee. You can ask for the list of the authorized

repairers to the customer service available at www.segway.com.

– If the product is no longer under guaranteed you can contact any specialized repairer of your choice.

– Should you have questions, you can contact customer service available at www.segway.com.

NOTE

Typically, a fully charged battery should retain charge for 120-180 days in Standby Mode. A low-power battery should retain charge for

30-60 days in Standby Mode. Remember to charge the battery after each use. Completely draining the battery may cause permanent

damage to the battery. Electronics inside the battery record the charge-discharge condition of the battery; damage caused by

over-discharge or under-discharge will not be covered by the Limited Warranty.

WARNING

Do not charge or use your battery if it is damaged or see trace of water. Do not attempt to disassemble the battery. Risk of ﬁre. No user

serviceable parts.

WARNING

Do not ride when the ambient temperature is outside the machine operation temperature (see Speciﬁcations) because low/high

temperature will limit the maximum power/torque. Doing so could cause personal injury or property damage due to slips or falls.

Others

The external flexible cable of this transformer cannot be replaced; if the cord is damaged, the transformer must be discarded and

replaced by a new one. Should you have questions, you can contact customer service available at www.segway.com.

In case of accident or breakdown: Please contact an authorized repairer if the product is still under guarantee. If not, you can contact any

specialized repairer of your choice.You can ask for the list of the authorized repairers to the customer service available at

www.segway.com. For any question, please contact customer service available at www.segway.com.

Eﬀorts have been made to simplify wording in the user manual for users.Where an action appears too complicated for a user, he is

advised to contact an authorized or a specialized repairer or customer service.

Cleaning and Storage

Use a soft, wet cloth to wipe the mainframe clean. Hard to remove dirt can be scrubbed with a toothbrush and toothpaste, then cleaned

with a soft, wet cloth.

NOTE

Do not wash your KickScooter with alcohol, gasoline, acetone, or other corrosive/volatile solvents. These substances may damage the

appearance and internal structure of your KickScooter. Do not wash your KickScooter with a power washer or hose.

WARNING

Make sure the KickScooter is powered OFF, the charging cable is unplugged, and the rubber cap on the charge port is tightly sealed before

cleaning; otherwise you may damage the electronic components.

Store your KickScooter in a cool, dry place. Do not store it outdoors for extended periods of time. Exposure to sunlight and temperature

extremes (both hot and cold) will accelerate the aging process of the plastic components and may reduce battery life.

[1] Typical Range: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 60% of max. speed on average on pavement.

* Some of the factors that aﬀect range include: speed, number of starts and stops, ambient temperature, etc.

[2] All KickScooter models could install the second battery. Some of the parameters would change in this case.

12 Speciﬁcations

16 17

Maintenance and removal of the battery

Do not remove the battery. Removing the battery is complicated and can alter the operation of the machine: You can contact an

authorized repairer if the product is still guaranteed. If the product is not guaranteed you can contact any specialized repairer of your

choice. You can ask for the list of the authorized repairers to the customer service available at www.segway.com. For any further question,

you can contact the customer service available at www.segway.com.

Do not store or charge the battery at temperatures outside the stated limits (see Speciﬁcations). Do not puncture the battery. Refer to

your local laws and regulations regarding battery recycling and/or disposal. A well maintained battery can perform well even after many

miles of riding. Charge the battery after each ride and avoid draining the battery completely. When used at room temperature (70°F

[22°C]) the battery range and performance is at its best; whereas using it at temperatures below 32°F (0°C) can decrease range and

performance. Typically, at -4°F (-20°C) range can be half that of the same battery at 70°F (22°C). Battery range will recover when

temperature rises. More details are available in the App.

Replace the Tires

Tires supplied with the product are to be mounted on the wheel by a professional repairer. Removing the wheels is complicated and

incorrect assembly can lead to instability and malfunctions:

– Please contact an authorized repairer if the product is still under manufacturer guarantee. You can ask for the list of the authorized

repairers to the customer service available at www.segway.com.

– If the product is no longer under guaranteed you can contact any specialized repairer of your choice.

– Should you have questions, you can contact customer service available at www.segway.com.

NOTE

Typically, a fully charged battery should retain charge for 120-180 days in Standby Mode. A low-power battery should retain charge for

30-60 days in Standby Mode. Remember to charge the battery after each use. Completely draining the battery may cause permanent

damage to the battery. Electronics inside the battery record the charge-discharge condition of the battery; damage caused by

over-discharge or under-discharge will not be covered by the Limited Warranty.

WARNING

Do not charge or use your battery if it is damaged or see trace of water. Do not attempt to disassemble the battery. Risk of ﬁre. No user

serviceable parts.

WARNING

Do not ride when the ambient temperature is outside the machine operation temperature (see Speciﬁcations) because low/high

temperature will limit the maximum power/torque. Doing so could cause personal injury or property damage due to slips or falls.

Others

The external flexible cable of this transformer cannot be replaced; if the cord is damaged, the transformer must be discarded and

replaced by a new one. Should you have questions, you can contact customer service available at www.segway.com.

In case of accident or breakdown: Please contact an authorized repairer if the product is still under guarantee. If not, you can contact any

specialized repairer of your choice. You can ask for the list of the authorized repairers to the customer service available at

www.segway.com. For any question, please contact customer service available at www.segway.com.

Eﬀorts have been made to simplify wording in the user manual for users. Where an action appears too complicated for a user, he is

advised to contact an authorized or a specialized repairer or customer service.

Item

Dimensions

Weight

Parameters

Battery

Motor

Charger

Features

Tire

Brake Light

Length x Width x Height

folded: Length x Width x Height

Payload

Rider Recommended Age

Required Height

Max. Speed

Typical Range [1]

Max. Slope

Operating Temperature

Storage Temperature

IP Rating

Duration of Charging

Traversable Terrain

Max. Charging Voltage

Charging Temperature 32–104°F (0–40°C)

Nominal Capacity

Battery Management System

Input Voltage

Output Voltage

Output Current

Nominal Voltage

Output Power

43.7 × 16.5 × 44.1 in (111 × 42 × 112 cm) 42.9 × 16.5 × 44.1 in (109 × 42 × 112 cm)

44.5 × 16.5 × 14.2 in (113 × 42 × 36 cm)44.9 × 16.5 × 14.2 in (114 × 42 × 36 cm)

55–220 lbs (25–100 kg)

13.7 miles (22 km)

15%

36 V

14–104°F (-10–40°C)

-4–122°F (-20–50°C)

42 V

184 Wh

Nominal Power 300 W, 0.3 kW

Over-heating, short circuit, over-current, over-discharge and over-charge protection

Number of Batteries [2] 1

100–240 V~

42 V

1.7 A

71 W, 0.071 kW

14+ years

3’11”–6’6” (120–200 cm)

IPX4

Approx. 3.5 h

asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)

12.4 mph (20 km/h)

LED rear light

Riding Modes

Tires

Speed limit mode, Standard mode and Sport mode

Material: non-pneumatic tires. synthetic rubber. Size: 9 inches

Net Weight Approx. 29.8 lbs (13.5kg)

E22E/E22D E22

[1] Typical Range: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 60% of max. speed on average on pavement.

* Some of the factors that aﬀect range include: speed, number of starts and stops, ambient temperature, etc.

[2] All KickScooter models could install the second battery. Some of the parameters would change in this case.

18 19

Item

Dimensions

Weight

Parameters

Battery

Motor

Charger

Features

Tire

Brake Light

Length x Width x Height

folded: Length x Width x Height

Payload

Rider Recommended Age

Required Height

Max. Speed

Typical Range [1]

Max. Slope

Operating Temperature

Storage Temperature

IP Rating

Duration of Charging

Traversable Terrain

Max. Charging Voltage

Charging Temperature 32–104°F (0–40°C)

Nominal Energy

Battery Management System

Input Voltage

Output Voltage

Output Current

Nominal Voltage

Output Power

45.7 × 16.5 × 46.1 in (116 × 42 × 117 cm)

46.9 × 16.5 × 14.2 in (119 × 42 × 36 cm)

55–220 lbs (25–100 kg)

15.5 miles (25 km)

15%

36 V

14–104°F (-10–40°C)

-4–122°F (-20–50°C)

42 V

215 Wh

Nominal Capacity 5960 mAh

Nominal Power 300 W, 0.3 kW

Over-heating, short circuit, over-current, over-discharge and over-charge protection

Number of Batteries [2] 1

100–240 V~

42 V

1.7 A

71 W, 0.071 kW

14+ years

3’11”–6’6” (120–200 cm)

IPX4

Approx. 4 h

asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)

12.4 mph (20 km/h)

LED rear light

Riding Modes

Tires

Speed limit mode, Standard mode and Sport mode

Ambient Light /

Shock Absorber Front

Material: non-pneumatic tires. synthetic rubber. Size: 9 inches

Net Weight 31.5 lbs (14.3 kg)

E25D

15.5 mph (25 km/h)

Customizable colour

E25E

17.4 mph (28 km/h)

Customizable colour

E25A Item

Dimensions

Weight

Parameters

Battery

Motor

Charger

Features

Tire

Brake Light

Length x Width x Height

folded: Length x Width x Height

Payload

Rider Recommended Age

Required Height

Max. Speed

Typical Range [1]

Max. Slope

Operating Temperature

Storage Temperature

IP Rating

Duration of Charging

Traversable Terrain

Max. Charging Voltage

Charging Temperature 32–104°F (0–40°C)

Nominal Energy

Battery Management System

Input Voltage

Output Voltage

Output Current

Nominal Voltage

Output Power

45.7 × 16.5 × 46.1 in (116 × 42 × 117 cm)

46.9 × 16.5 × 14.2 in (119 × 42 × 36 cm)

55–220 lbs (25–100 kg)

28.0 miles (45 km)

20%

36 V

14–104°F (-10–40°C)

-4–122°F (-20–50°C)

42 V

368 Wh

Nominal Capacity 10.2 Ah

Nominal Power 300 W, 0.3 kW

Over-heating, short circuit, over-current, over-discharge and over-charge protection

Number of Batteries 2

100–240 V~

42 V

1.7 A

71 W, 0.071 kW

14+ years

3’11”–6’6” (120–200 cm)

IPX4

Approx. 7.5 h

asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)

18.6 mph (30 km/h)

LED rear light

Riding Modes

Tires

Speed limit mode, Standard mode and Sport mode

Ambient light Customizable colour

Shock Absorber Front

Material: non-pneumatic tires. synthetic rubber. Size: 9 inches

Net Weight 33.1 lbs (15.0 kg)

E45

[1] Typical Range: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 60% of max. speed on average on pavement.

* Some of the factors that aﬀect range include: speed, number of starts and stops, ambient temperature, etc.

12.4 mph (20 km/h)

/

E45D

15.5 mph (25 km/h)

Customizable colour

E45E

For Model: E22D, E22E,E25D, E25E, E45D, E45E

This product is certiﬁed to ANSI/CAN/UL-2272 by CSA.

The battery complies with UN/DOT 38.3.

European Union Compliance Statement

Important WEEE information

WEEE Disposal and Recycling Information Correct Disposal of this product. This marking indicates that this product should not be

disposal with other household wastes throughout the EU.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsible to promote the

sustainable reuse of materials resources. To return your used device, please use the return and collection systems or contact the retailer

where the product was purchased. They can take this product for environmen-tal safe recycling.

Battery recycling information for the European Union

Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC and amendment 2013/56/EU

concerning batteries and accumulators and waste batteries and accumulators. The Directive determines the framework for the return and

recycling of used batteries and accumulators as applicable throughout the European Union. This label is applied to various batteries to

indicate that the battery is not to be thrown away, but rather reclaimed upon end of life per this Directive.

In accordance with the European Directive 2006/66/EC and amendment 2013/56/EU, batteries and accumulators are labeled to indicate

that they are to be collected separately and recycled at end of life. The label on the battery may also include a chemical symbol for the

metal concerned in the battery (Pb for lead, Hg for mercury, and Cd for cadmium). Users of batteries and accumulators must not dispose

of batteries and accumulators as unsorted municipal waste, but use the collection framework available to customers for the return,

recycling, and treatment of batteries and accumulators. Customer participation is important to minimize any potential eﬀects of batteries

and accumulators on the environment and human health due to the potential presence of hazardous substances.

Before placing electrical and electronic equipment (EEE) in the waste collection stream or in waste collection facilities, the end user of

equipment containing batteries and/or accumulators must remove those batteries and accumulators for separate collection.

Restriction of Hazardous Substances (RoHS) Directive

This Ninebot (Changzhou) Tech Co., Ltd. product, with included parts (cables, cords, and so on) meets the requirements of Directive

2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("RoHS recast" or "RoHS 2").

For Model: E22, E25A, E45

This product is certiﬁed to ANSI/CAN/UL-2272 by CSA.

The battery complies with UN/DOT 38.3.

Federal Communications Commission (FCC) Compliance Statement for USA

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired

operation.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment.

Industry Canada (IC) Compliance Statement for Canada

This device complies with Industry Canada license-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this

device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired

operation of the device.

CAN ICES-3 (B)/NMB-3(B)

Neither Segway Inc. nor Ninebot is responsible for any changes or modiﬁcations not expressly approved by Segway Inc. or Ninebot. Such

modiﬁcations could void the user's authority to operate the equipment.

13 Certiﬁcations

20 21

FCC ID: 2ALS8-KS0001

IC: 22636-KS0001

E45

FCC ID: 2ALS8-KS0003

IC: 22636-KS0003

E25A

FCC ID: 2ALS8-NT9529

IC: 22636-NT9529

E22

Ninebot is the registered trademark of Ninebot (Tianjin) Tech. Co., Ltd; Segway and the Rider Design are the registered trademarks of

Segway Inc.; Android, Google Play are trademarks of Google Inc., App Store is a service mark of Apple Inc., The respective owners reserve

the rights of their trademarks referred to in this manual.

The KickScooter is covered by relevant patents. For patent information go to http://www.segway.com.

We have attempted to include descriptions and instructions for all the functions of the KickScooter at the time of printing. However, due

to constant improvement of product features and changes of design, your KickScooter may diﬀer slightly from the one shown in this

document. Visit the Apple App Store (iOS) or the Google Play Store (Android) to download and install the App.

Please note that there are multiple Segway and Ninebot models with diﬀerent functions, and some of the functions mentioned herein may

not be applicable to your unit. The manufacturer reserves the right to change the design and functionality of the KickScooter product and

documentation without prior notice.

Radio Equipment Directive

The company “Segway Europe BV” hereby declares that this device complies with the essential requirements and other relevant provisions

of the RED directive 2014/53/EU, the machine directive 2006/42/EC and the RoHS directive 2011/65/EU.

The declaration of conformity can be viewed at the following address: http://eu-en.segway.com/support-instructions

Segway Europe B.V.

EU Contact Address for regulatory topics only: Hogehilweg 8, 1101CC Amsterdam, The Netherlands.

Hereby, Ninebot (Changzhou) Tech Co., Ltd, declares that the wireless equipment listed in this section are in compliance with the essential

requirements and other relevant provisions of Directive 2014/53/EU.

Contact us if you experience issues relating to riding, maintenance and safety, or errors/faults with your KickScooter.

Americas:

Segway Inc.

14 Technology Drive, Bedford, NH 03110, USA

Tel: 1-603-222-6000

Fax: 1-603-222-6001

Toll Free: 1-866-473-4929

E-mail Sales: customeroperation@segway.com

E-mail Service: technicalsupport@segway.com

Website: www.segway.com

Europe, Middle East and Africa:

Segway Europe B.V.

Hogehilweg 8, 1101CC Amsterdam, The Netherlands

Website: www.segway.com

Have your KickScooter serial number on hand when contacting Segway.

You can ﬁnd your serial number on the underside of your KickScooter or Basic Information in the Segway-Ninebot App.

15 Contacts

14 Trademark and Legal Statement

22 23

Bluetooth Frequency Band(s)

Max. RF Power

2.4000-2.4835GHz

100mW

Ninebot KickScooter

Manuel utilisateur

Traduction des instructions originales

www.segway.com

The manufacturer reserves the right to make changes to the product, release ﬁrmware updates, and update this

manual at any time. Visit www.segway.com or check the App to download the latest user materials. You must install the

App, activate your KickScooter, and obtain the latest updates and safety instructions.

01

Nous vous remercions d'avoir choisi le Ninebot KickScooter (ci-après dénommé KickScooter)!

Votre KickScooter est un dispositif de transport élégant avec une application mobile vous permettant de vous

connecter à d'autres conducteurs.

Savourez le trajet et connectez-vous à des conducteurs à travers le monde!

Ce manuel s'applique aux modèles suivants :

Séries E22: E22 / E22D / E22E

Séries E25: E25A / E25D / E25E

Séries E45: E45 / E45D / E45E

Sommaire Nous vous remercions d'avoir choisi la série Ninebot KickScooter!

4 Assemblage de votre KickScooter

5 Installation d'une seconde batterie (en option)

1 Sécurité

2 Liste d'emballage

3 Diagramme

6 Première utilisation

7 Charge

8 Apprendre à conduire

9 Avertissements

11 Entretien

13 Certiﬁcations

12 Spéciﬁcations

10 Repliement et

14 Marque commerciale et déclaration juridique

15 Contacts

02

04

05

06

07

08

09

11

15

17

15

20

23

AVERTISSEMENT!

Utilisez toujours le frein électrique et la pédale de frein ensemble pour les arrêts d'urgence. Sinon, vous

n'atteindrez pas la capacité de freinage maximum ce qui pourrait provoquer une chute et/ou une collision.

* La photo est pour référence seulement. Veuillez vous référer au produit réel pour plus de détails.

02 03

1 Sécurité

1. Le KickScooter est un dispositif de transport conçu pour la récréation. En maîtriser la conduite demande de l'entraînement.

Ninebot Inc. et Segway Inc. déclinent toute responsabilité en cas de blessure ou dommage causé par le manque d'expérience d'un

conducteur ou par le non-respect des instructions contenues dans ce document.

2. Veuillez noter qu'il est possible de réduire les risques en suivant l'ensemble des instructions et avertissements contenus dans ce

manuel, mais qu'il n'est pas possible d'éliminer tous les risques. Rappelez-vous que lorsque vous utilisez le KickScooter, vous vous

exposez à un risque de blessure en cas de perte de contrôle, collision ou chute. Lorsque vous pénétrez des espaces publics,

conformez-vous toujours aux lois et règlements applicables. Comme pour les autres véhicules, la distance nécessaire au freinage

augmente avec la vitesse. Un freinage brusque sur des surfaces à faible adhérence peut entraîner un patinage des roues ou une

chute. Soyez prudents et conservez toujours une distance suﬃsante entre vous et les autres personnes ou véhicules lorsque vous

conduisez. Soyez attentifs et ralentissez lorsque vous pénétrez des lieux qui ne vous sont pas familiers.

3. Portez toujours un casque lorsque vous conduisez. Utilisez un casque homologué pour vélo ou skateboard, de taille adaptée, avec

la mentonnière en place, protégeant l'arrière de votre tête.

4. Ne réalisez pas votre premier essai dans un lieu où vous pourriez rencontrer des enfants, des piétons, des animaux de compagnie,

des véhicules, des cyclistes ou d'autres obstacles et dangers potentiels.

5. Respectez les piétons en leur laissant toujours la priorité. Doublez à gauche si possible. Lorsque vous approchez un piéton de

l'avant, restez à droite et ralentissez. Évitez de surprendre les piétons. Lorsque vous approchez par derrière, annoncez-vous et

ralentissez de sorte à atteindre une vitesse de marche pour doubler. Dans les autres situations, veuillez respecter les lois et

règlements concernant la circulation routière.

6. Dans les lieux où les lois ne s'appliquent pas, respectez les consignes de sécurité présentées dans ce manuel. Ninebot Inc. et

Segway Inc. déclinent toute responsabilité en cas de dommages matériels, dommages corporels/décès, accidents ou litiges

juridiques résultant de violations des consignes de sécurité.

7. Ne permettez à personne d'utiliser votre KickScooter seul à moins qu'il ou elle n'est lu attentivement ce manuel et suivi le tutoriel

Nouveau conducteur dans l'application. La sécurité des nouveaux utilisateurs relève de votre responsabilité. Aidez les nouveaux

utilisateurs jusqu'à ce qu'ils soient à l'aise avec le maniement de base du KickScooter. Assurez-vous que chaque nouvel utilisateur

porte un casque et d'autres équipements de protection.

8. Avant chaque utilisation, assurez-vous qu'il n'y ait pas ﬁxations desserrées et de composants endommagés. Si le KickScooter

produit des bruits anormaux ou émet une alarme, cessez immédiatement l'utilisation. Eﬀectuez un diagnostic de votre

KickScooter via l'application Segway-Ninebot et appelez votre revendeur-/-distributeur pour la réparation.

9. Soyez attentifs! Regardez au loin et devant votre KickScooter: vos yeux sont votre meilleur outil sécurité pour éviter les obstacles

et les surfaces à faible traction (y compris, mais sans s'y limiter, les sols mouillés, le sable, le gravier et le verglas).

10. Pour réduire le risque de blessure, vous devez lire et suivre tous les avis «ATTENTION» et «AVERTISSEMENT» dans ce document.

Ne conduisez pas à une vitesse dangereuse. Vous ne devez conduire en aucune circonstance sur la route avec des véhicules

motorisés. L’âge recommandé par le fabricant est de 14+ ans. Suivez toujours les consignes de sécurité:

A. Les personnes devant s'abstenir de conduire le KickScooter incluent:

i. Toute personne se trouvant sous l'emprise de l'alcool ou de drogues.

ii. Toute personne souﬀrant d'une maladie qui la met en danger lorsqu'elle pratique une activité physique intense.

iii. Toute personne ayant des problèmes d'équilibre ou d'habileté motrice pouvant lui faire perdre l'équilibre.

iv. Toute personne dont le poids est en dehors des limites indiquées (voir Spéciﬁcations).

v. Les femmes enceintes.

B. Les conducteurs de moins de 18 ans doivent être supervisés par un adulte.

C. Conformez-vous aux lois et règlements applicables lorsque vous utilisez ce produit. Ne conduisez pas sur des sites interdits par

les lois applicables.

D. Pour conduire de manière sûre, vous devez être en mesure de voir clairement ce qui se trouve devant vous et vous devez être

clairement visible pour les autres.

E. Ne conduisez pas dans la neige ou sous la pluie ou sur des chaussées mouillées, boueuses, glacées ou glissantes, pour quelque raison

que ce soit. Ne conduisez pas sur des obstacles (sable, gravier ou bouts de bois). Cela pourrait causer une perte d'équilibre ou de

traction pouvant entraîner une chute.

11. N'essayez pas de charger votre KickScooter si ce dernier, le chargeur ou la prise de courant est mouillé(e).

12. Comme pour tout appareil électronique, utilisez un dispositif antisurtension lors de la charge pour protéger votre KickScooter de tout

dommage dû aux pics d'intensité et pointes de tension. Utilisez uniquement le chargeur fourni par Segway. N'utilisez pas de chargeur

conçu pour un modèle diﬀérent.

13. Utilisez uniquement des pièces et accessoires homologué(e)s par Ninebot ou Segway. Ne modiﬁez pas votre KickScooter. Le fait

d'apporter des modiﬁcations à votre KickScooter peut nuire au bon fonctionnement du KickScooter, peut entraîner des

blessures et/ou dommages graves et peut entraîner la révocation de la Garantie limitée.

14. Les enfants ne peuvent jouer avec la trottinette ou des parties de celle-ci. Le nettoyage ou l'entretien ne peut être eﬀectué par

des enfants. L'utilisation de la machine entraîne la transmission de vibrations dans l'ensemble du corps du conducteur.

15. Placez toujours la trottinette sur sa béquille sur une surface plane et stable. La trottinette doit être placée avec la béquille à

contre-pente aﬁn d’éviter tout basculement. Ne placez jamais la trottinette avec l'avant face à la pente, la béquille pourrait se

refermer et faire basculer la machine. Une fois la trottinette sur sa béquille, vériﬁez sa stabilité aﬁn d’éviter tout risque de chute

(par glissement, vent ou léger à-coup). Ne stationnez pas la trottinette dans un endroit passant mais privilégiez plutôt le long

d’un mur. Dans la mesure du possible, choisissez toujours de stationner sa trottinette sur un sol plat.

16. Pour une meilleure expérience de conduite, il est conseillé d'eﬀectuer l'entretien régulier du produit.

17. Veuillez lire le manuel d'utilisation avant de charger la batterie.

18. Ne touchez pas au système de freinage, cela peut entraîner des blessures.

19. Le niveau de pression acoustique d'émission pondéré A est inférieur à 70 dB (A). Les vibrations mécaniques transmises par le

KickScooter sont inférieures à 2,5 m/s2.

04 05

3 Diagramme

Aile arrière/pédale de frein

Plaque d'immatriculation*

* Pour E22D.

Pédale de repliement

Tableau de bord et Bouton

Accélérateur électronique

Béquille

Tronc (réceptacle de la batterie)

Moteur du moyeu

Réflecteur*

* Pour E22D et E22E.

Réflecteur*

* Pour E22D et E22E.

Phare avant

Tableau de bord et Bouton marche

Compteur de vitesse: Indique la vitesse actuelle. Aﬃche également les codes d'erreur lorsque des problèmes sont détectés.

Niveau de puissance: Indique le niveau de batterie restant avec 5 barres. Chaque barre correspond approximativement à un niveau de puissance de 20%.

Mode de puissance :

—Icône rouge «S»: Mode Sport (puissance/vitesse maximales).

—Icône blanche «S»: Mode Standard (puissance/vitesse).

—Pas d'icône «S»: Mode Vitesse limitée (puissance/vitesse minimales).

Bluetooth: Une icône Bluetooth clignotante indique que le véhicule est prêt à être connecté. Une icône Bluetooth ﬁxe indique que le véhicule est

connecté à un appareil mobile.

Bouton marche: Appuyez brièvement pour allumer. Appuyez longuement pour éteindre. Lorsque l'appareil est allumé, cliquez une fois pour

allumer/éteindre le phare avant. Double-cliquez pour modiﬁer le mode de puissance.

marche Frein électronique

Loquet de

repliement

Port de charge

Second port de batterie

2 Liste d'emballage

Manche Cadre central

Lorsque vous déballez votre KickScooter pour la première fois, veuillez vériﬁer que les articles ci-dessus sont inclus dans l'emballage. S'il vous

manque des composants, veuillez contacter votre revendeur/distributeur ou le centre de service le plus proche (voir la section Contacts du

manuel utilisateur). Après avoir vériﬁé que tous les composants sont présents et en bon état, vous pouvez assembler votre nouveau KickScooter.

Veuillez conserver la boîte et l'emballage au cas où vous auriez besoin de faire expédier votre KickScooter à l'avenir.

Rappelez-vous d'éteindre votre KickScooter et de débrancher le câble du chargeur avant l'assemblage, le montage des accessoires ou le nettoyage

de la pièce centrale.

Accessoires

Vis M5 Flathead x 7

(une de rechange)

Clé hexagonale 3mm Chargeur de batterie

Contenus utilisateur

Seconde batterie

DÉMARRAGE RAPIDEMANUEL UTILISATEUR GARANTIE LIMITÉE

E22E/E22/E22D

Vendu séparément

Cloche

Bouton marche

(multifonctions)

Bluetooth

Aﬃchage d'erreur

Compteur de vitesse

Mode de puissance

Pointe de surchauﬀe

Niveau de puissance

06 07

4 Assemblage de votre KickScooter

3. Installez quatre vis (deux de chaque côté)

avec la clé hexagonale incluse.

4. Vériﬁez que votre KickScooter s'allume et

s'éteigne.

2. Connectez fermement les câbles à l'intérieur

du manche et du tronc. Faites glisser le

manche dans le tronc. Assurez-vous de

l'orienter correctement.

Phare orienté

vers l'avant

1. Dépliez le tronc et poussez-le jusqu'à ce que vous

entendiez un déclic. Relevez la pédale de

repliement. Dépliez ensuite la béquille pour

soutenir le scooter.

Remarque: Vériﬁez que l'axe de verrouillage sur le

mécanisme de pliage est correctement ﬁxé.

3. Installez la batterie externe sur le port de batterie; ﬁxez-la

avec les 2 vis M4 de 20mm et vis M3 (1 pièce) pourvues à

cet eﬀet avec le produit. Après installation, bloquez les

trous de vis avec la protection en caoutchouc.

2. Installez le port de batterie avec les 3 vis M4 de

10mm pourvues à cet eﬀet avec votre produit.

Assurez-vous de la bonne ﬁxation.

4. Vériﬁez que votre KickScooter s'allume et

s'éteigne.

1. Retirez les trois vis sur le tronc, comme indiqué. Retirez

ensuite le cache situé près du port de chargeet retirer

la vis M3.

5 Installation d'une seconde batterie (en option) Attention : N'utilisez que les vis pourvues

à cet eﬀet dans l'emballage.

Axe de Verrouillage

08

09

7 Charge

8 Apprendre à conduire

Portez un casque homologué et d'autres équipements

de protection pour minimiser toute blessure possible.

1. Allumez le scooter et vériﬁez le témoin

d'indication du niveau de puissance. Chargez

le scooter si le niveau de batterie est faible.

6 Première utilisation Le fait d'apprendre à utiliser le KickScooter pose des risques de sécurité. Lisez les

consignes de sécurité dans l'application avant votre première utilisation.

Pour votre sécurité, votre KickScooter n'est pas activé et il émettra occasionnellement un

son après l'avoir mis sur ON.

Tant qu'il n'est pas activé, le KickScooter conserve une vitesse de marche très faible et ses

pleines fonctionnalités ne peuvent pas être utilisées. Installez l'application sur votre appareil

mobile (avec Bluetooth 4.0 ou ultérieur), connectez-le au KickScooter par Bluetooth, et

suivez les instructions de l'application pour activer votre KickScooter pour bénéﬁcier de la

pleine performance.

Scannez le code QR pour télécharger l'application (iOS 9.0 ou ultérieur, Android™ 4.3 ou ultérieur).

Votre KickScooter est pleinement chargé lorsque la LED sur le chargeur passe du rouge (en charge) au vert (charge de

maintien). Fermez le cache du port de charge lorsque le scooter n'est pas en charge.

21 Installez l'application et inscrivez-vous ou

identiﬁez-vous.

Allumez le KickScooter. Une icône Bluetooth

clignotante indique que le KickScooter est en

attente de connexion.

3

4

Cliquez sur «Rechercher un véhicule» pour vous

connecter à votre KickScooter. Le KickScooter émet un

son lorsque la connexion est réussie. L'icône Bluetooth

arrête de clignoter et reste illuminée.

Suivez les instructions de l'application pour activer le KickScooter et apprenez comment le manier avec prudence.

Vous pouvez maintenant commencer à utiliser votre KickScooter, vériﬁez le statut dans l'application et interagissez avec

les autres utilisateurs. Amusez-vous bien!

AVERTISSEMENT

Ne connectez pas le chargeur si le port de charge ou le câble du chargeur est mouillé. Ne chargez pas et n'utilisez pas

votre batterie si elle est endommagée ou si vous voyez des traces d'eau.

Port de charge

(Deuxième

batterie incluse)

Fermez le cache

du port de

charge

lorsque vous

avez terminé.

Ouvrez le

cache du port

de charge.

Insérez la

prise du

chargeur.

Port de charge

conseils pour l'étape de charge

Vehicle Fans Moments MeDiscover

Segway-Ninebot App

10 11

AVERTISSEMENT

Un freinage rapide peut poser un risque de blessures sérieuses dues à une perte de traction et une chute. Conservez

une vitesse modérée et faites attentions aux dangers potentiels.

3. Placez votre autre pied sur l'appui-pieds pour assurer

la stabilité des deux pieds. Appuyez sur l'accélérateur

de la main droite pour accélérer lorsque vous avez

trouvé votre équilibre.

Remarque: pour assurer votre sécurité, le moteur ne

s'embrayera pas jusqu'à ce que le scooter atteigne la

vitesse 4 km/h.

4. Ralentissez en lâchant l'accélérateur. Serrez le

frein électronique et tamponnez l'aile avec le

pied en même temps pour un freinage brusque.

2. Tenez-vous sur l'appui-pieds avec un pied et

poussez avec votre autre pied pour

commencer à glisser.

5. Pour tourner, déplacez le poids de votre corps

et tournez doucement le manche.

Faites attention à votre tête

lorsque vous passez sous une

porte.

Faites attention à votre vitesse lorsque vous roulez en

descente. Utilisez les deux freins en même temps

lorsque vous vous déplacez à grande vitesse.

Maintenez votre vitesse entre 5 et 10 km/h lorsque vous roulez sur

les dos d'âne, les seuils de portes d'ascenseur, les routes défoncées

ou autre surfaces irrégulières. Fléchissez légèrement le genou pour

une meilleure adaptation à ces surfaces.

9 Avertissements

Ne conduisez PAS le scoot-

er sous la pluie.

AVERTISSEMENT

Le fait de ne pas suivre ces instructions peut entraîner des blessures graves.

La pagina si sta caricando...

Segway-Ninebot KickScooter E Series (E22/E25/E45) Manuale del proprietario

Segway-Ninebot KickScooter E Series (E22/E25/E45) Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti