Panasonic sa-ht16 Manuale utente

Categoria
Ricevitori AV
Tipo
Manuale utente
POWER
INPUT SELECTOR
2
2
TUNE
MENU
%DIGITAL
%PL
H. BASS
DOWN
VOLUME
PHONES
UP
SC-HT17
PPCPP
RQT7949-1P
Dear customer
Thank you for purchasing this product.
Before connecting, operating or adjusting this product, please
read the instructions completely.
Please keep this manual for future reference.
SC-HT17 is used in the illustrations unless otherwise
mentioned.
SC-HT16 is only for the U.S.A.
For Canada only: The word "Participant" is used in 
place of the word "Partner".
Operating Instructions
Home Theater Audio System
Model No. SC-HT17
SC-HT16
SC-HT15
Table of contents
Before use
IMPORTANT SAFETY INSTRUCTIONS................. 2
Supplied accessories ............................................ 3
The remote control ................................................ 3
Step 1
Speaker setup
4
Step 2
Home theater
connections
8
Step 3
Other connections
10
Step 4
Settings
13
Operations
Basic operations.................................................. 15
Control guide........................................................ 16
The radio............................................................... 18
Other functions ....................................................19
Making a recording .............................................. 21
The RESET function ............................................21
Remote control operation guide......................... 22
Reference
Specifications.......................................................25
Listening caution ................................................ 26
Maintenance ........................................................ 26
Product service.................................................... 26
Warranty (U.S.A.)..................................................27
Troubleshooting guide .........................Back cover
SC-HT17PP-EN.fm Page 1 Thursday, March 17, 2005 9:56 AM
2
RQT7949
Before use
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety
instructions listed below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
Any unauthorized changes or modifications to this equipment
would void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PRODUCT DAMAGE, DO NOT
EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE PLACED ON
THE APPARATUS.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
The socket outlet shall be installed near the equipment and
easily accessible or the mains plug or an appliance coupler
shall remain readily operable.
SC-HT17PP-EN.fm Page 2 Thursday, March 17, 2005 9:56 AM
3
RQT7949
Before use
(K2CB2CB00006)
(EUR7722KK0)
SC-HT17
(EUR7722KH0)
SC-HT16 SC-HT15
(RSA0007-L)
(N1DAAAA00002)
(K1HA25HA0001)
(RQCA1029)
(RKA0072-KJ)
(RYQV0060)
(RYQV0059-S)
(REE1203A) (4 m x 1)
SC-HT17
(REE1203A) (4 m x 1)
(REE1203C) (10 m x 2)
SC-HT15SC-HT16
SC-HT17
SC-HT16
SC-HT15
SC-HT17
SC-HT15SC-HT16
SC-HT17
SC-HT16 SC-HT15
(XTN5+32FFN)
(XTN4+8FFN)
(XTN5+32FFN)
(XTN4+8FFN)
5
xxxxxx
xxx
5
xxxxxx
xxx
4
xxxxxx
xxx
4
xxxxxx
xxx
3
xxxxxx
xxx
3
xxxxxx
xxx
2
xxxxxx
xxx
2
xxxxxx
xxx
1
xxxxxx
xxx
1
xxxxxx
xxx
5
xxxxxx
xxx
5
xxxxxx
xxx
4
xxxxxx
xxx
4
xxxxxx
xxx
3
xxxxxx
xxx
3
xxxxxx
xxx
2
xxxxxx
xxx
2
xxxxxx
xxx
1
xxxxxx
xxx
1
xxxxxx
xxx
(x 4)
(x 2)
(x 2)
(K7CXJCA00001)
(RYQV0060A)
(x 2)
(x 2)
SC-HT17
SC-HT16
Please check and identify the supplied
accessories.
AC power supply cord
System cable
FM indoor antenna
Remote control transmitter
AM loop antenna
Batteries
Speaker cable(s)
Sticker sheet
Speaker stands
Stand bases
Screws
Speaker stands with long cables
(Large x 8)
(Small x 8)
(Large x 4)
(Small x 4)
Rubber pads
Optical fiber cable
Use the numbers indicated in parentheses when asking for
replacement parts. (As of January 2005)
In U.S.A. to order accessories, refer to “Accessory
Purchases” on page 27.
Supplied accessories
System SC-HT17 SC-HT16 SC-HT15
Main unit SA-HT17 SA-HT16 SA-HT15
Front speakers SB-FS930 SB-FS880 SB-FS880
Surround speakers SB-FS880 SB-FS15 SB-FS15
Center speaker SB-PC930 SB-PC15 SB-PC15
Subwoofer SB-WA17 SB-WA16 SB-WA15
3
2
2
1
R6/LR6, AA, UM-3
Insert so the poles (+ and –) match those in the remote
control.
Do not use rechargeable type batteries.
Aim at the sensor, avoiding obstacles, at a maximum range of
7 m (23 feet) directly in front of the unit.
Use
POWER
INPUT SELECTOR
2
2
TUNE
MENU
%DIGITAL
%PL
H. BASS
DOWN
VOLUME
PHONES
UP
Remote control signal sensor
Transmission window
7 meters (23 feet)
Note
Keep the transmission window and the unit’s sensor free from
dust.
Operation can be affected by strong light sources, such as
direct sunlight, and the glass doors on cabinets.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are trademarks
of Dolby Laboratories.
“DTS” and “DTS Digital Surround” are registered trademarks
of Digital Theater Systems, Inc.
The remote control
SC-HT17PP-EN.fm Page 3 Thursday, March 17, 2005 9:56 AM
4
RQT7949
Speaker setup Step 1
1
Speaker setup
Step
To prevent damage or scratches, lay a soft cloth and perform assembly on it.
For assembly, use a Phillips-head screwdriver.
Front and surround speaker assembly
1
1
3
2
Attach the pipe to the base.
Thread the speaker cable through the base.
Untie the cable before threading.
Secure the pipe to the base.
The supplied stands are specially designed for use with
this unit’s speakers.
Only use as indicated in this setup.
Small screws
(included)
Match the holes.
Insert the pipe.
Ensure the screws are securely fastened by lightly tightening
the left and right side screws alternately until fully tightened.
2
SC-HT17
Attach the stand to the speaker.
Ensure the stand is fastened on straight by lightly tightening the top and bottom
screws alternately until fully tightened.
There is no difference between the right and left speakers.
You can also attach to the upper rear of the speaker.
Speaker height
Front Speakers
Try to line up the middle of the
speakers with the middle of the
television.
Surround speakers
It is usually better to position the
surround speakers a little higher.
Large screws
(included)
Before attaching, check the speaker label.
SB-FS930: Use as front speakers. Attach the stands with the short cables.
SB-FS880: Use as surround speakers. Attach the stands with the long cables.
(x 2)
SC-HT17
SC-HT15SC-HT16
SC-HT17
SC-HT15SC-HT16
(x 2)(x 2)
(x 4)
(x 2)
SC-HT17
Supplied
accessories
Speaker stands with long cables
Stand bases
Speaker stands
SC-HT17PP-EN.fm Page 4 Thursday, March 17, 2005 9:56 AM
5
RQT7949
Speaker setup Step 1
3
1
2
3
Connect the speaker cables.
Connect the speaker cables.
Press the speaker cable into the groove.
Thread the excess cable.
Copper
Silver
4
Fasten the speaker cable to the base.
Slot
5
xxxxxx
xxx
5
xxxxxx
xxx
4
xxxxxx
xxx
4
xxxxxx
xxx
3
xxxxxx
xxx
3
xxxxxx
xxx
2
xxxxxx
xxx
2
xxxxxx
xxx
1
xxxxxx
xxx
1
xxxxxx
xxx
5
xxxxxx
xxx
5
xxxxxx
xxx
4
xxxxxx
xxx
4
xxxxxx
xxx
3
xxxxxx
xxx
3
xxxxxx
xxx
2
xxxxxx
xxx
2
xxxxxx
xxx
1
xxxxxx
xxx
1
xxxxxx
xxx
(x 4)
(x 8)
(x 4)
(x 8)
(4 m x 1)
(4 m x 1) (10 m x 2)
SC-HT17
SC-HT15SC-HT16
SC-HT17
SC-HT15SC-HT16
SC-HT17
SC-HT15SC-HT16
(x 1)
Sticker sheet
Small screws
Large screws
Speaker cable(s)
5
SC-HT17
5
xxxxxx
xxx
5
xxxxxx
xxx
4
xxxxxx
xxx
4
xxxxxx
xxx
3
xxxxxx
xxx
3
xxxxxx
xxx
2
xxxxxx
xxx
2
xxxxxx
xxx
1
xxxxxx
xxx
1
xxxxxx
xxx
5
xxxxxx
xxx
5
xxxxxx
xxx
4
xxxxxx
xxx
4
xxxxxx
xxx
3
xxxxxx
xxx
3
xxxxxx
xxx
2
xxxxxx
xxx
2
xxxxxx
xxx
1
xxxxxx
xxx
1
xxxxxx
xxx
5
CENTER
1
FRONT
Lch
5
CENTER
1
FRONT
Lch
3
SURROUND
Lch
3
SURROUND
Lch
1
2
3
4
5
1
FRONT
Lch
1
FRONT
Lch
SC-HT16 SC-HT15
Attach the stickers to the speaker cables.
Front and surround speakers
Use the speakers with long cables for the surround
speakers (SB-FS880).
About 10 cm (4”)
Front speaker (R)
About 10 cm (4”)
Front speaker (L)
Surround speaker (L)
Surround speaker (R)
Center speaker
Center speaker
About 10 cm (4”)
Surround and center speakers
Use the long speaker cables for the surround
speakers (SB-FS15).
Front speakers
About 10 cm (4”)
SC-HT17PP-EN.fm Page 5 Thursday, March 17, 2005 9:56 AM
6
RQT7949
Speaker setup Step 1
Speaker setup
Placement and connections of speakers
1
SC-HT16
SC-HT15
Place the speakers.
Center speaker
Front speaker (R)
Subwoofer
Front
speaker (L)
Surround
speaker (R)
Surround speaker
(L)
Positioning for best effect
How you set up your speakers can affect the
bass and the sound field.
Note the following points.
Attach the included rubber pads to the base
of the center speaker (SC-HT16 and
SC-HT15: center and surround speakers).
This prevents vibration from causing the
speakers to move or fall over. Use 4 pads
per speaker.
Place speakers on flat secure bases.
Placing speakers too close to floors, walls,
and corners can result in excessive bass.
Cover walls and windows with a thick
curtain.
e.g., SC-HT17
Surround speakers
Place on a shelf or
rack.
Front speakers (left, right)
Place on the left and right of the TV at seated ear height so that there is good
coherency between the picture and sound.
Center speaker
Place underneath or above the center of the TV. Aim the speaker at the seating
area.
Surround speakers (left, right)
Place on the side of or slightly behind the seating area, higher than ear level.
Subwoofer
The subwoofer can be placed in any position as long as it is at a reasonable
distance from the TV.
Note that some experimentation can yield the smoothest low frequency
performance. Placement near a corner can increase the apparent output level, but
can result in unnatural bass.
Note
Keep your speakers at least 10 mm (13/32")
away from the system for proper ventilation.
Rubber pads
Rubber pads
Bottom of center speaker
Bottom of surround speaker (SC-HT16 and
SC-HT15)
Attaching the rubber pads
Place the front, center, and surround speakers at approximately the same distance
from the seating position.
The angles in the diagram are approximate.
Preventing the speakers from falling over
Attach screw eyes (not included) to secure the speakers to a wall
(diagram on the right).
Obtain the screws appropriate to the walls and pillars to which they are
going to be fastened.
Consult with a qualified housing contractor concerning the appropriate
procedure when attaching to a concrete wall or a surface that may not
have strong enough support. Improper installation may result in
damage to the wall or speakers.
Wall
screw eyes
(not included)
Speaker
If irregular coloring occurs on your television
The supplied speakers are designed to be used close to a
television, but the picture may be affected with some televisions
and setup combinations.
If this occurs, turn the television off for about 30 minutes.
The television's demagnetizing function should correct the
problem. If it persists, move the speakers further away from the
television.
Caution
The main unit and supplied speakers are only to be
used as indicated in this manual. Failure to do so may
lead to damage to the receiver and/or the speakers,
and may result in the risk or fire. Consult a qualified
service person if damage has occurred or if you
experience a sudden change in performance.
Do not attempt to attach these speakers to walls using
methods other than those described in this manual.
SC-HT17
SC-HT16
SC-HT15
Supplied
accessories
Rubber pads
SC-HT17PP-EN.fm Page 6 Thursday, March 17, 2005 9:56 AM
7
RQT7949
Speaker setup Step 1
7.5 -9.4 mm
SC-HT16 SC-HT15
3.0-4.0 mm
180 mm
(7-1/16”)
174 mm
(6-7/8”)
Screw
(not included)
Attaching to a wall
Wall or pillar
30 - 35 mm
(1-3/16” - 1-3/8”)
7 - 9 mm (9/32” - 11/32”)
Surround speakers
(19/64” - 3/8”)
(1/8” - 5/32”)
2
SC-HT17
SC-HT16 SC-HT15
CENTER
FRONT (R)
FRONT (L)
SURROUND
(L)
2 1 4 3 5
SURROUND
(R)
4
3
1
5
2
6
FRONT
4
CENTER
4
SURROUND
R L R L
Connect the speaker cables to the subwoofer.
Subwoofer
Copper
Silver
Note
Never short-circuit positive (+)
and negative (–) speaker wires.
Copper
Silver
Other speaker setup options
The wall or pillar on which the speakers are to be attached should be capable of
supporting 10 kg (22 lb.) per screw. Consult a qualified building contractor when
attaching the speakers to wall. Improper attachment may result in damage to the wall
and speakers.
When mounting the speakers to walls, use a string (not included) to prevent them
from falling (
è page 6).
(SC-HT17: front and surround speakers, SC-HT16 and SC-HT15: front speakers)
Use of optional speaker cables are recommended when mounting. (You can also
remove the speaker cables from the pipes supplied with this system.)
Fitting optional speaker stands
SC-HT16 SC-HT15
60 mm
(2-23/64”)
Plate thickness +7 to 10 mm
(9/32” - 25/64”)
Speaker
stands (not
included)
Surround speakers
Observe the diameter and length of the
screws and the distance between screws
as shown in the diagram.
The stands must be able to support over
10 kg (22 lb.).
The stands must be stable even if the
speakers are in a high position.
5 mm, Pitch 0.8 mm
SC-HT17PP-EN.fm Page 7 Thursday, March 17, 2005 9:56 AM
8
RQT7949
Home theater connections Step 2
DVR / VCR
TV DVD / DVD 6CH
TV
OUTIN
IN
L L L L L L
R R R R R R
FRONT
SURROUND
SUBWOOFER
DVR / VCR
DVD
OPT 1 OPT 2
COAXIAL
OUT ININ IN
(TV) IN (DVR) IN (DVD) IN
CENTER
MONITOR OUT
IN
IN
AUDIO VIDEO
DIGITAL IN
FM
A
NT
AM
ANT
LOOP
ANT
GND
GAME/AUX
GAME/AUX
S-VIDEO
MONITOR OUT
IN IN IN
TV
DVR / VCR
DVD
INOUT IN
TV MONITOR
DVR TV
COMPONENT VIDEO
B
P
R
P
R
P
R
P
B
P
B
Y Y Y
P
FRONT
(L, R)
SURROUND
(L, R)
SUBWOOFER
CENTER
AUDIO OUT
VIDEO
OUT
VIDEO
IN
DIGITAL
AUDIO
OUT
S-VIDEO
MONITOR OUT
IN IN IN
TV
DVR / VCR
DVD
S-VIDEO
IN
S-VIDEO
OUT
TV (Monitor)
Use this connection for better picture quality than with the VIDEO
terminals.
S-VIDEO terminals
DVD player
DVD Player
TV (Monitor)
SC-HT17
Stereo connection cable
(not included)
Video connection cable
(not included)
Left
Right
Other
accessories
Coaxial cable
(not included)
S-Video cable
(not included)
Turn off all components before making any connections.
To connect equipment, refer to the appropriate operating instructions.
2
Home theater connections
Step
SC-HT17PP-EN.fm Page 8 Thursday, March 17, 2005 9:56 AM
9
RQT7949
Home theater connections Step 2
FRONT (L, R)
AUDIO OUT
DIGITAL AUDIO
OUT
VIDEO OUT
OPT 1 OPT 2
COAXIAL
(TV) IN (DVR) IN (DVD) IN
DIGITAL IN
FM
ANT
AM
ANT
DVR / VCRTV
OUTININ IN
AUDIO
LOOP
ANT
GND
GAME/AUX
IN
DVD
L
R
L
R
L
R R
L
R
L
VIDEO IN
DVD player
DVD player
TV (Monitor)
Subwoofer and AC power supply cord
T
IN
L L
R R
TO SB-WA17
A
FM
ANT
AM
ANT
75
LOOP
EXT
L
O
A
N
G
GAME/AUX
AC IN
~
To SA-HT17
A
Subwoofer
To disconnect
Press the catch and pull out.
Catch
AC power supply cord (included)
Connect this cord after all other
cables are connected.
Household AC outlet
(AC 120 V/60 Hz)
System cable (included)
Connect the video cable
directly to the TV.
SC-HT15
SC-HT15
SC-HT16
Conserving power
The unit consumes a small amount of power
even when it is turned off with [8, POWER].
To save power when the unit is not to be used
for a long time, unplug it from the household
AC outlet. You will need to reset some
memory items after plugging in the unit.
SC-HT16
SC-HT17
Notes on digital input
This unit can decode the following signals:
Dolby Digital, DTS
PCM, including PCM with sampling frequencies of 96
or 88.2 kHz
It cannot decode:
Other digital signals, such as MPEG
Dolby Digital RF signals from a laser disc player
Changing the digital input settings
You can change the input settings for the digital terminals if
necessary. Note the equipment you have connected to the
terminals, then change the settings (
è page 13).
Note
The included AC power supply cord is for use with this unit
only. Do not use it with other equipment.
Do not use an AC power supply cord from any other type of
equipment with this unit.
Use digital connection to enjoy Dolby Digital or DTS.
(x 1)
(x 1)
Supplied
accessories
System cable AC power supply cord
SC-HT17PP-EN.fm Page 9 Thursday, March 17, 2005 9:56 AM
10
RQT7949
Other connections Step 3
3
Other connections
Step
Stereo connection cable
(not included)
Video connection cable
(not included)
Left
Right
Other
accessories
Optical fiber cable
(not included)
S-Video cable
(not included)
DVD recorder or VCR
DVR / VCR
TV DVD / DVD 6CH
TV
OUTIN
IN
L L L L L L
R R R R R R
FRONT
SURROUND
SUBWOOFER
DVR / VCR
DVD
OPT 1 OPT 2
COAXIAL
OUT ININ IN
(TV) IN (DVR) IN (DVD) IN
CENTER
MONITOR OUT
IN
IN
AUDIO VIDEO
DIGITAL IN
TO SB-WA17
A
FM
ANT
AM
ANT
75
LOOP
EXT
LOOP
ANT
GND
GAME/AUX
GAME/AUX
S-VIDEO
MONITOR OUT
IN IN IN
TV
DVR / VCR
DVD
INOUT IN
TV MONITOR
DVR TV
COMPONENT VIDEO
B
P
R
P
R
P
R
P
B
P
B
Y Y Y
P
VIDEO OUT
VIDEO IN
AUDIO OUT
AUDIO IN
DIGITAL AUDIO
OUT
S-VIDEO
MONITOR OUT
IN IN IN
TV
DVR / VCR
DVD
S-VIDEO OUT
S-VIDEO IN
INOUT IN
TV MONITOR
DVR TV
COMPONENT VIDEO
B
P
R
P
R
P
R
P
B
P
B
Y Y Y
P
COMPONENT
VIDEO OUT
P
R
Y
B
P
COMPONENT
VIDEO IN
P
R
Y
B
P
OPT 1 OPT 2
COAXIAL
(TV) IN (DVR) IN (DVD) IN
DIGITAL IN
FM
ANT
AM
ANT
75
LOOP
EXT
DVR / VCRTV
OUTININ IN
AUDIO
TO SB-WA15
A
LOOP
ANT
GND
GAME/AUX
IN
DVD
L
R
L
R
L
R R
L
R
L
DIGITAL AUDIO
OUT
AUDIO OUT
AUDIO IN
VIDEO OUT
VIDEO IN
DVD recorder or VCR
Use this connection for better picture quality
than with the VIDEO terminals.
TV (Monitor)
S-VIDEO terminals
DVD recorder or VCR
DVD recorder or VCR
Connect the video cable directly
to the TV.
TV (Monitor)
SC-HT15
COMPONENT VIDEO terminals
This connection provides high quality pictures by separating the color
(P
B and PR) and the luminance (Y) signals.
TV (Monitor)
SC-HT16
Refer to the SC-HT35R SETUP GUIDE when connecting a DMR-ES10 DVD recorder.
SC-HT16
SC-HT17
SC-HT17PP-EN.fm Page 10 Thursday, March 17, 2005 9:56 AM
11
RQT7949
Other connections Step 3
Changing the digital input settings
You can change the input settings for the digital terminals if
necessary. Note the equipment you have connected to the
terminals, then change the settings (
è page 13).
Note
Use digital connection to enjoy Dolby Digital or DTS.
Do not bend the optical fiber cable.
TV (Input source)
OPT 1 OPT 2
COAXIAL
(TV) IN (DVR) IN (DVD) IN
DIGITAL IN
FM
ANT
AM
ANT
75
LOOP
EXT
DVR / VCRTV
OUTININ IN
AUDIO
TO SB-WA15
A
LOOP
ANT
GND
GAME/AUX
IN
DVD
L
R
L
R
L
R R
L
R
L
AUDIO
OUT
DIGITAL AUDIO
OUT
DVR / VCR
TV DVD / DVD 6CH
TV
OUTIN
IN
L L L L L L
R R R R R R
FRONT
SURROUND
SUBWOOFER
DVR / VCR
DVD
OPT 1 OPT 2
COAXIAL
OUT ININ IN
(TV) IN (DVR) IN (DVD) IN
CENTER
MONITOR OUT
IN
IN
AUDIO VIDEO
DIGITAL IN
TO SB-WA17
A
FM
ANT
AM
ANT
75
LOOP
EXT
LOOP
ANT
GND
GAME/AUX
GAME/AUX
S-VIDEO
MONITOR OUT
IN IN IN
TV
DVR / VCR
DVD
INOUT IN
TV MONITOR
DVR TV
COMPONENT VIDEO
B
P
R
P
R
P
R
P
B
P
B
Y Y Y
P
VIDEO OUT
VIDEO IN
AUDIO
OUT
DIGITAL AUDIO
OUT
S-VIDEO
MONITOR OUT
IN IN IN
TV
DVR / VCR
DVD
S-VIDEO OUT
S-VIDEO IN
INOUT IN
TV MONITOR
DVR TV
COMPONENT VIDEO
B
P
R
P
R
P
R
P
B
P
B
Y Y Y
P
COMPONENT
VIDEO OUT
P
R
Y
B
P
COMPONENT
VIDEO IN
P
R
Y
B
P
Use this connection for better picture quality
than with the VIDEO terminals.
S-VIDEO terminals
TV (Input source)
TV
OPT 1 OPT 2
COAXIAL
(TV) IN (DVR) IN (DVD) IN
DIGITAL IN
FM
ANT
AM
ANT
75
LOOP
EXT
DVR / VCRTV
OUTININ IN
AUDIO
TO SB-WA15
A
LOOP
ANT
GND
GAME/AUX
IN
DVD
L
R
L
R
L
R R
L
R
L
AUDIO
OUT
DIGITAL AUDIO
OUT
TV
COMPONENT VIDEO terminals
This connection provides high quality pictures by separating the color
(P
B and PR) and the luminance (Y) signals.
SC-HT15SC-HT16
SC-HT17
SC-HT17PP-EN.fm Page 11 Thursday, March 17, 2005 9:56 AM
12
RQT7949
Other connections Step 3
DVR / VCRTV DVD / DVD 6CH
TV
OUTIN
IN
L L L L L L
R R R R R R
FRONT
SURROUND
SUBWOOFER
DVR / VCR
DVD
OUT ININ IN
CENTER
MONITOR OUT
IN
IN
AUDIO VIDEO
TO SB-WA17
A
FM
ANT
AM
ANT
75
LOOP
EXT
LOOP
ANT
GND
GAME/AUX
GAME/AUX
OUT IN
TV MONITOR
DVR
COMPONENT VIDE
B
P
R
P
R
P
R
P
B
P
B
Y Y Y
P
FM
ANT
AM
ANT
75
LOOP
EXT
LOOP
ANT
GND
2
3
1
2
1
FM indoor antenna
(included)
AM loop antenna
(included)
Adhesive tape
Fix the end of the antenna
where reception is best.
For best reception
FM outdoor antenna (not included)
Disconnect the FM indoor antenna.
The antenna should be installed by a
competent technician.
75
coaxial cable
Keep the antenna cord away from DVD players and other cords.
FM outdoor antenna
Red
Antenna plug
Click!
White
Black
Antennas
Other connections
(x 1)
(x 1)
Supplied
accessories
FM indoor antenna
AM loop antenna
Game machine or other AV equipment
DVR / VCR
TV DVD / DVD 6CH
TV
OUTIN
IN
L L L L L L
R R R R R R
FRONT
SURROUND
SUBWOOFER
DVR / VCR
DVD
OUT ININ IN
CENTER
MONITOR OUT
IN
IN
AUDIO VIDEO
-WA17
A
FM
ANT
AM
ANT
75
LOOP
EXT
LOOP
ANT
GND
GAME/AUX
GAME/AUX
INOUT IN
TV MONITOR
DVR TV
COMPONENT VIDEO
B
P
R
P
R
P
R
P
B
P
B
Y Y Y
P
VIDEO OUT
AUDIO OUT
Game machine
OPT 1 OPT 2
(TV) IN (DVR) I
N
DIGITAL I
N
FM
A
NT
AM
ANT
DVR / VCRTV
OUTININ IN
AUDIO
LOOP
ANT
GND
GAME/AUX
IN
DVD
L
R
L
R
L
R R
L
R
L
AUDIO OUT
VIDEO OUT
VIDEO IN
Game machine
TV (Monitor)
Connect the video cable
directly to the TV.
SC-HT16 SC-HT15
Stereo connection cable (not included) Video connection cable (not included)
Left
Right
Other
accessories
SC-HT17
SC-HT17PP-EN.fm Page 12 Thursday, March 17, 2005 9:56 AM
Settings
13
RQT7949
Step 4
4
Change the settings to suit your equipment to the environment in which you are using it. Before making any changes, read the
descriptions of the settings, note the factory settings and ranges, and refer to the equipment’s instructions.
POWER
INPUT SELECTOR
2
2
TUNE
MENU
%DIGITAL
%PL
H. BASS
DOWN
VOLUME
PHONES
UP
POWER
INPUT SELECTOR
2
2
TUNE
MENU
Enter the distance of the front, center and surround speakers
from the seating position.
The factory settings are:
DISTANCE
FRONT:
CENTER:
SURROUND:
10 FEET
10 FEET
5 FEET
Change the setting for the DIGITAL IN terminals (OPT1, OPT2,
COAXIAL) on the rear of the unit if the equipment you have
connected is different to that labeled.
The factory settings are:
Note
You can allocate only one piece of equipment per terminal. So
for example if you change “TV” from “OPT1” to “OPT2”, “DVR
will automatically switch to “OPT1”.
D-INPUT (digital input)
FRONT
COMPLETE
10 FEET
FRONT CENTER
SURROUND
3 FEET 30 FEET
D-INPUT
SETUP
DISTANCE
COMPLETE
SETUP
DISTANCE
D-INPUT
DR COMP
A/D ATT
TV
TV DVR DVD
OPT 1
OPT 1 OPT 2 COAX
1
2
3
4
55
4
3
2
1
DISTANCE
D-INPUT
DR COMP
A/D ATT
INPUT SELECTOR
2
2
TUNE
2
2
TUNE
2
2
TUNE
2
2
TUNE
2
2
TUNE
MENU
INPUT SELECTOR
2
2
TUNE
MENU
TV:
DVR:
DVD:
OPT1
OPT2
COAX
Press at the same time.
Press at the same time.
Press at the same time.
Enter the setup mode. Enter the setup mode.
Select “DISTANCE”.
Select the speaker.
Change the setting.
Exit the setup mode.
Select “D-INPUT”.
Select the input position.
Change the setting.
Exit the setup mode.
OR
Press at the same time.
OR
Settings
Switch on.
Repeat steps 3 and 4
Repeat steps 3 and 4
Step
DISTANCE è See below
D-INPUT è See below
DR COMP è See page 20
A/D ATT è See page 20
SC-HT17PP-EN.fm Page 13 Thursday, March 17, 2005 9:56 AM
14
RQT7949
Settings Step 4
Adjusting speaker output level
INPUT MODE
MUSIC
AV/MOVIE
SFC
EFFECT
TONE/
BALANCE
ENTER
DISC
CH
VOLUME
TOP MENU
FUNCTIONS
DIRECT NAVIGATOR
SUB MENU/
PLAY LIST
SUBWOOFER
TV/VIDEO
RETURN
DIRECT TUNING
123
7
0
89
10
45 6
>
=
u
i
MUTING
q
gh
%PL
TV VOL TV VOL
/L /R
ENTER
SKIP
SLOW/SEARCH
STOP PAUSE
PLAY
^^
AV SYSTEMRECEIVER
VCR
-
TUNER/
-
BAND
DVD
DVD
PLAYER
TV
SELECT
DRIVE
RECORDER
ANALOG 6CH
OFF
t
y
-
LEVEL/
-
TEST
-
H.BASS/
-
C.FOCUS
REC MODE
REC
DVD REC
TV
1 2 53 4
-
LEVEL/
-
TEST
-
LEVEL/
-
TEST
-
LEVEL/
-
TEST
VOLUME
/L /R
Output the
signal.
Adjust the main
volume.
Select the
speaker
channel.
Adjust the level.
Repeat steps 3 and 4
Stop the test
signal.
Press and hold
Press and hold
C (center), RS (right surround) and LS (left surround) can be adjusted between –10 dB and +10 dB, with 0 dB being the level of
the front speakers. Adjust center and surround output to the same apparent level of the front speakers.
For SW (subwoofer), you can select “- - -” so there is no output, “MIN” for minimum output, a level between 1 and 19, or “MAX” for
maximum output. Adjust subwoofer output so it is balanced with the front speakers.
Subwoofer output is easily influenced by the source. You can also change its level while playing something for better effect
(
è page 19).
Settings
SC-HT17PP-EN.fm Page 14 Thursday, March 17, 2005 9:56 AM
Operations
15
RQT7949
Basic operations
MOVIE
Use this mode when playing movie software, especially
videotapes, recorded in Dolby Surround.
MUSIC
Adds surround effects to stereo sources.
PANORAMA
Sound is spread out more so you feel like you are surrounded by
music.
LIVE
Brings you up close for “live” stage performance and smoother
vocals.
POP/ROCK
For pop, rock, and other music that has a punch to it.
VOCAL
For adding gloss to vocals.
JAZZ
Conveys the exciting and intimate atmosphere of a jazz club.
DANCE
For dance music and other sounds with a strong beat.
PART Y
This mode uses the front and surround speakers so that sound is in
stereo regardless of the direction you are facing.
DRAMA
For dramas and other material where dialog is important.
ACTION
For action movies and other material where impact is important.
SPORTS
To make you feel like you were in the stadium.
MUSICAL
For musicals and other material where music is important.
GAME
Enjoy gaming with more impact.
MONO
For monaural sound.
Adding surround effects to stereo sources
POWER
INPUT SELECTOR
2
2
TUNE
MENU
%DIGITAL
%PL
H. BASS
DOWN
VOLUME
PHONES
UP
INPUT MODE
MUSIC
AV/MOVIE
SFC
EFFECT
TONE/
BALANCE
ENTER
SUB MENU/
PLAY LIST
SUBWOOFER
TV/VIDEO
RETURN
MUTING
%PL
TV VOL TV VOL
/L /R
OFF
-
LEVEL/
-
TEST
-
H.BASS/
-
C.FOCUS
REC MODE
REC
DVD REC
TV
%PL
MUSIC
AV/MOVIE
SFC
1 2 3 4
TUNER TVDVD
DVR/VCRGAME/AUX
OFF
POWER
INPUT SELECTOR
DOWN
VOLUME
UP
Switch on. Select input.
Start play of the
source.
The unit sets the
sound mode to suit
the input signal.
Adjust the
volume.
(SC-HT17) When playing video sources connected to DVD
The picture remains on the screen even if you select TUNER.
Dolby Pro LogicII processor works not only on
sources recorded with Dolby Surround, but also on
any stereo source.
Press to select a mode from the table at right.
To cancel, press [OFF].
You can make fine surround settings when in the
MUSIC or PANORAMA mode. (è page 21)
Enjoy an enhanced sound experience with greater
presence and spread by using these SFC modes
with PCM or analog stereo sources.
Press to select a mode from the tables at right.
To cancel, press [OFF].
You can adjust SFC effects.
(è page 21)
Note
Dolby Pro LogicII and SFC modes remain in
effect until you turn the mode off.
When input is PCM with sampling frequencies of
96 or 88.2 kHz, you cannot add surround effects
with Dolby Pro LogicII or SFC.
When input is Dolby Digital or DTS, you cannot
use SFC.
Using Dolby Pro LogicII
Using the Sound Field Control (SFC)
%PL
MUSIC
AV/MOVIE
%PL
MUSIC
AV/MOVIE
SFC
SC-HT17PP-EN.fm Page 15 Thursday, March 17, 2005 9:56 AM
Operations
16
RQT7949
Control guide
Main unit
Display
[DIGITAL INPUT]
Program format indicators
Show the channels contained in the digital
input signal.
They do not light when input is analog.
L: Front left channel
C: Center channel
R: Front right channel
LS: Surround left channel
S: If the surround channel is monaural.
RS: Surround right channel
LFE (Low Frequency Effects): Deep-bass
effect.
[TUNED, ST, MONO]
Radio indicators
TUNED: A station is tuned.
ST: A stereo FM broadcast
is tuned.
MONO: You have switched
to monaural mode to
improve reception.
[SLEEP]
Sleep timer indicator.
[M]
Flashes or lights
during presetting.
[C.FOCUS, 2CH MIX, SFC]
C.FOCUS: Appears when you are using
Center Focus
2CH MIX: Appears when you are listening to a
multi-channel source with headphones
SFC: Appears when you are using an SFC
mode
General display
Shows the input mode, radio
frequency and other general
information.
[kHz, MHz]
Frequency unit
indicators
kHz: AM, or PCM
sampling frequency
MHz: FM
Spectrum
analyzer display
TUNED
MONO
SLEEP
ST
kHz
MHz
DIGITAL INPUT
SFC
M
C.FOCUS
L
C
R
LS RS
S
LFE
100Hz
10kHz
2CH MIX
Standby indicator [^]
When the unit is connected to the AC
mains supply, this indicator lights up in
standby mode and goes out when the
unit is turned on.
[8, POWER]
Press to switch the unit from on to
standby mode or vice versa. In standby
mode, the unit is still consuming a small
amount of power.
[% DIGITAL, % PL II, dts]
Lights to indicate the source’s input signal
and decoding format used.
% DIGITAL: Dolby Digital sources
% PL II: Dolby Pro LogicII decoder is
being used
dts: DTS sources
[H.BASS]
For enhancing the bass sound.
The indicator lights when the feature
is on.
[INPUT SELECTOR]
For selecting input.
The display changes as
follows:
[2 TUNE 1]
For tuning the radio and
presetting channels.
[MENU]
For entering various
settings.
Press and hold to exit the
MENU mode.
[PHONES]
Headphone jack
Plug type: 3.5 mm (1/8") stereo
Sound does not come from the
speakers if you connect
headphones.
Avoid listening for prolonged
periods of time to prevent hearing
damage.
POWER
INPUT SELECTOR
2
2
TUNE
MENU
%DIGITAL
%PL
H. BASS
DOWN
VOLUME
PHONES
UP
Remote control
signal sensor
[VOLUME]
Volume control.
TUNER TVDVD
DVR/VCRGAME/AUX
SC-HT17PP-EN.fm Page 16 Thursday, March 17, 2005 9:56 AM
Operations
17
RQT7949
[DVD PLAYER, –ANALOG 6CH]
[TV] [DVD RECORDER] [VCR]
[DVD PLAYER] [TV]
[DVD RECORDER] [VCR]
Input mode and remote control mode
buttons.
[DVD PLAYER, –ANALOG 6CH]
(SC-HT17)
Press and hold and DVD input
switches between 6-channel and
2-channel.
[-TUNER/–BAND]
For selecting TUNER.
After selecting TUNER, press and
hold to switch between FM and AM.
[+, –, VOLUME]
To adjust the volume.
[MUTING]
To mute the volume.
[-LEVEL/–TEST]
Use when adjusting speaker level.
Press and hold to start the speaker
test signal.
[EFFECT]
Use when adjusting Dolby Pro LogicII
or SFC effects.
[–/L, +/R]
First select EFFECT, LEVEL, TONE
or BALANCE, then press [–/L] or [+/R]
to adjust.
[AC IN]
This indicator lights when the unit is
connected to the AC power supply.
Remote control and Subwoofer
This page describes the buttons used to control this unit.
See the guide starting page 22 for the buttons that control other units.
[^, RECEIVER]
Standby/on button.
[1, 2, 3, 4, 5, 6, 7, 8, 9, 0]
To enter radio frequencies and
channels.
[ 10, ENTER]
To enter two digit channels.
[DISC, DIRECT TUNING]
To enable selection of radio stations
by frequency.
[1, CH, 2]
For selecting preset radio channels.
[SUBWOOFER]
For selecting subwoofer level.
[-H.BASS/–C.FOCUS]
For enhancing the bass sound.
Press and hold to select center
focus mode.
[INPUT MODE]
For selecting AUTO, ANALOG or
DIGITAL.
[TONE/BALANCE]
To adjust the bass, treble and front
speaker balance.
[OFF]
To cancel surround effect.
[% PL II]
For selecting a Dolby Pro LogicII
mode: MOVIE, MUSIC or
PANORAMA.
[MUSIC]
For selecting SFC modes: LIVE, POP/
ROCK, VOCAL, JAZZ, DANCE or
PART Y.
[AV/MOVIE]
For selecting SFC modes: DRAMA,
ACTION, SPORTS, MUSICAL, GAME
or MONO.
INPUT MODE
MUSIC
AV/MOVIE
SFC
EFFECT
TONE/
BALANCE
ENTER
DISC
CH
VOLUME
TOP MENU
FUNCTIONS
DIRECT NAVIGATOR
SUB MENU/
PLAY LIST
SUBWOOFER
TV/VIDEO
RETURN
DIRECT TUNING
1
23
7
0
89
10
45 6
>
=
u
i
MUTING
q
gh
%PL
TV VOL TV VOL
/L /R
ENTER
SKIP
SLOW/SEARCH
STOP PAUSE
PLAY
^^
AV SYSTEMRECEIVER
VCR
-
TUNER/
-
BAND
DVD
DVD
PLAYER
TV
SELECT
DRIVE
RECORDER
ANALOG 6CH
OFF
t
y
-
LEVEL/
-
TEST
-
H.BASS/
-
C.FOCUS
REC MODE
REC
DVD REC
TV
SC-HT17SC-HT17
SC-HT16
(SC-HT17) When DVD ANALOG 6CH input is selected:
Set your DVD player speaker output to "small", provided it has a speaker output setting function.
SC-HT15
SC-HT17PP-EN.fm Page 17 Thursday, March 17, 2005 9:56 AM
Operations
18
RQT7949
The radio
Remote control
Input the frequency of the station.
1.Press [-TUNER/–BAND] to select “TUNER”.
2.Press and hold [-TUNER/–BAND] to select “FM” or
“AM”.
3.Press [DISC, DIRECT TUNING].
4.Press the numbered buttons to enter the frequency.
e.g. To select 107.9 MHz, press [1] [0] [7] [9]
If you do not press a button while the cursor is flashing, the
display returns to the frequency being received.
If the frequency has not been input correctly, “ERROR” will be
displayed.
The FM stations the unit can receive are preset in channels 1 to
30. The AM stations the unit can receive are preset in channels
21 to 30. (FM stations are replaced if any were preset in these
channels.)
Main unit
Preparation: Select “FM” or “AM”.
1.Press [MENU] to select “MEMORY”.
2.Press and hold [TUNE 2].
The tuner presets all the stations it can receive into the channels
in ascending order.
If you press and hold [TUNE 1], it starts from the current
frequency.
During automatic presetting, the memory indicator (M) flashes
and the frequency scrolls. The memory indicator and channel
numbers are displayed for a second when a station is preset.
The last station to be preset is displayed when presetting
finishes.
To cancel
Press and hold [MENU].
Direct tuning
Automatic presetting
Preset the stations one at a time.
Main unit
Preparation: Tune to the station you want to preset.
1.Press [MENU] to select “MEMORY”.
2.Press [TUNE 2 or 1] to select the channel.
3.Press [MENU] to store.
To can ce l
Press and hold [MENU].
For your reference
FM stations can also be preset in the MONO mode.
Remote control
Press [
1, CH, 2].
or
Press the numbered buttons.
For channels 1 to 9, press the corresponding number.
For channels 10 or over, press [
10, ENTER], then the two
digits.
e.g. To select channel 21: [
10, ENTER] [2] [1]
You can improve FM reception by switching reception to
Main unit
monaural.
1.Press [MENU] to select “FM MODE”.
2.Press [TUNE 2 or 1] to select “MONO”.
Select “AUTO” to cancel.
3.Press [MENU].
“MONO” lights.
Manual presetting
Selecting channels
FM mode
To switch between FM and AM on the main unit
1. Press [MENU] to select “BAND”.
2. Press [TUNE 2 or 1] to select “FM” or “AM”.
3. Press [MENU].
DISC
CH
DIRECT TUNING
1
23
7
0
89
10
45 6
>
=
ENTER
INPUT MODE
EFFECT
TONE/
C
ENTER
DISC
CH
VOLUME
TOP MENU
FUNCTIONS
DIRECT NAVIGATOR
SUB MENU/
PLAY LIST
SUBWOOFER
TV/VIDEO
RETURN
DIRECT TUNING
1
23
7
0
89
10
45 6
>
=
u
i
MUTING
q
gh
TV VOL TV VOL
/L /R
ENTER
SKIP
SLOW/SEARCH
STOP PAUSE
PLAY
^^
AV SYSTEMRECEIVER
VCR
-
TUNER/
-
BAND
DVD
DVD
PLAYER
TV
SELECT
DRIVE
RECORDER
ANALOG 6CH
t
y
-
LEVEL/
-
TEST
-
H.BASS/
-
C.FOCUS
REC MODE
REC
DVD REC
TV
POWER
INPUT SELECTOR
2
2
TUNE
MENU
%DIGITAL
%PL
H. BASS
DOWN
VOLUME
PHONES
UP
2 31
2
2
TUNE
MENU
-
TUNER/
-
BAND
-
TUNER/
-
BAND
Select “FM” or
“AM”.
Select the frequency.
Auto tuning starts if you press
and hold the button.
Press and hold
Select “TUNER”.
SC-HT17PP-EN.fm Page 18 Thursday, March 17, 2005 9:56 AM
Operations
19
RQT7949
Other functions
POWER
INPUT SELECTOR
2
2
TUNE
MENU
%DIGITAL
%PL
H. BASS
DOWN
VOLUME
PHONES
UP
INPUT MODE
MUSIC
AV/MOVIE
SFC
EFFECT
TONE/
BALANCE
ENTER
DISC
TOP MENU
FUNCTIONS
DIRECT NAVIGATOR
SUB MENU/
PLAY LIST
SUBWOOFER
TV/VIDEO
RETURN
DIRECT TUNING
7
0
89
10
>
=
u
i
MUTING
q
gh
%PL
TV VOL TV VOL
/L /R
ENTER
SKIP
SLOW/SEARCH
STOP PAUSE
PLAY
OFF
t
y
-
LEVEL/
-
TEST
-
H.BASS/
-
C.FOCUS
REC MODE
REC
DVD REC
TV
H. BASS
INPUT MODE
TONE/
BALANCE
SUBWOOFER
MUTING
/L /R
-
H.BASS/
-
C.FOCUS
This unit automatically detects whether input is digital or analog,
Remote control
but you can fix the input mode.
Press [INPUT MODE] to select "AUTO", "ANALOG" or
"DIGITAL".
Remote control
You can adjust the level of the bass and treble.
1.Press [TONE/BALANCE] to select “BASS” or
“TREBLE”.
2.Press [–/L] or [+/R] to adjust bass/treble.
Note
Input signals must be either analog or PCM, and Dolby Pro
LogicII and SFC must be off.
(SC-HT17) You cannot adjust the tone if DVD ANALOG 6CH
is selected.
Remote control
You can adjust the balance of the front speakers.
1.Press [TONE/BALANCE] to select “BALANCE”.
2.Press [–/L] or [+/R] to adjust.
Remote control
Press [SUBWOOFER].
Adjust the level in 5 steps:
SW MIN, SW 5, SW 10, SW 15, and SW MAX.
Select SW - - - to stop output.
Note
Sound can be distorted if you raise the volume while
subwoofer level is high. Reduce subwoofer level if this occurs.
(SC-HT17) You cannot adjust the subwoofer level if DVD
ANALOG 6CH is selected.
Input mode
Tone
Balance
Subwoofer level
You can enhance low-frequency sound so that heavy bass
sound can be heard clearly, even if the acoustics of your room
Remote control
are not optimal.
Main unit
Press [-H.BASS/–C.FOCUS].
Press [H.BASS].
The indicator lights.
To cancel
Press [-H.BASS/–C.FOCUS] or [H.BASS] again.
Note
You cannot use H.Bass when you are using headphones.
Actual effect depends on the disc.
(Disc where the dialogue is recorded in the center channel)
You can make the sound of the center speaker seem like it is
Remote control
coming from within the television.
Press and hold [-H.BASS/–C.FOCUS].
“C.FOCUS” lights.
The factory setting is off.
The center focus cannot be used in the following cases:
When input signal is PCM or analog stereo.
(SC-HT17) When DVD ANALOG 6CH is selected.
Remote control
Press [MUTING].
To cancel
Press [MUTING] again.
Muting is also canceled when the unit is turned off.
H.Bass
Center focus
Muting
SC-HT17PP-EN.fm Page 19 Thursday, March 17, 2005 9:56 AM
Operations
20
RQT7949
Other functions
POWER
INPUT SELECTOR
2
2
TUNE
MENU
%DIGITAL
%PL
H. BASS
DOWN
VOLUME
PHONES
UP
INPUT MODE
MUSIC
AV/MOVIE
SFC
EFFECT
TONE/
BALANCE
ENTER
TOP MENU
SUB MENU/
PLAY LIST
SUBWOOFER
TV/VIDEO
RETURN
MUTING
%PL
TV VOL TV VOL
/L /R
OFF
-
LEVEL/
-
TEST
-
H.BASS/
-
C.FOCUS
REC MODE
REC
DVD REC
TV
INPUT SELECTOR
2
2
TUNE
MENU
INPUT MODE
Turn the A/D attenuator on if “OVERFLOW” lights frequently
Main unit
when using 2-channel analog input.
1.Press [TUNE 2 and 1] at the same time to enter the
setup mode.
2.Press [INPUT SELECTOR] to select “A/D ATT”.
3.Press [TUNE 2 or 1] to select “ON” or “OFF”.
4.Press [TUNE 2 and
1] at the same time to exit the
setup mode.
Change this setting to listen to software recorded with Dolby
Digital at low volume (such as late at night) and maintain audio
clarity. It reduces the peak level in loud scenes without affecting
Main unit
the sound field.
1.Press [TUNE 2 and 1] at the same time to enter the
setup mode.
2.Press [INPUT SELECTOR] to select “DR COMP”.
3.Press [TUNE 2 or 1] to select “OFF”, “STANDARD”
or “MAX”.
4.Press [TUNE 2 and 1] at the same time to exit the
setup mode.
OFF:
The software is played with the original dynamic range (factory
setting).
STANDARD:
The level recommended by the producer of the software for
household viewing.
MAX:
The maximum allowable compression (recommended for night
viewing).
Main unit
Dim the display for better viewing in a darkened room.
1.Press [MENU] to select “DIMMER”.
2.Press [TUNE 2 or 1] to select “OFF” or “ON”.
3.Press [MENU].
A/D attenuator
Dynamic range compression
Dimmer
The SLEEP timer can turn the unit off after a set time.
Main unit
It does not control any other components.
1.Press [MENU] to select “SLEEP”.
2.Press [TUNE 2 or 1] to select the desired time.
The display changes as follows:
OFF
v SLEEP 30 v SLEEP 60 v SLEEP 90 v
SLEEP 120 (minutes)
3.Press [MENU].
The display dims even when the dimmer is “OFF”.
To check the setting
1. Press [MENU] to select “SLEEP”.
2. Press [TUNE 2 or 1] once. The time remaining appears.
3. Press [MENU].
To change a setting
Repeat the procedure from the beginning.
In rare cases, the unit may have trouble recognizing the digital
signals on discs.
With the PCM signals on CDs, this may cause the beginning
of a track to be cut off. Engage the PCM FIX mode if this
occurs.
With DTS, the signals may not be recognized at all. Engage
the DTS FIX mode if this occurs.
Remote control
While the input source is selected:
1.Press [INPUT MODE] to select “DIGITAL”
2.Press and hold [INPUT MODE] for four seconds.
The current mode is displayed. Press again to change the mode.
Each time you press the button:
AUTO PCM FIX DTS FIX
When a FIX mode is on, the unit cannot process other signals.
This may cause noise to be output. Select “AUTO” if this occurs.
The mode returns to AUTO when you switch the unit to standby.
For your reference
If you are playing a DTS CD that contains both DTS and PCM,
but it isn’t playing properly, then do the following after step 1
above:
On the Main unit
1. Press [MENU] to select “DTS-PCM”.
2. Press [TUNE 2 or 1] to select “ON”.
3. Press [MENU].
If this causes noise to occur, return the setting to “OFF”. (This
setting is effective for each digital source.)
Sleep timer
PCM/DTS fix mode
SC-HT17PP-EN.fm Page 20 Thursday, March 17, 2005 9:56 AM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

Panasonic sa-ht16 Manuale utente

Categoria
Ricevitori AV
Tipo
Manuale utente

in altre lingue