Samsung VL351 Manuale utente

Tipo
Manuale utente

Questo manuale è adatto anche per

FULL MANUAL
A
Regulatory Compliance Statements
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
This symbol indicates that
high voltage is present inside.
It is dangerous to make any
kind of contact with any
internal part of this product.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE THE
COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
This symbol indicates that
this product has included
important literature
concerning operation and
maintenance.
Class II product : This symbol indicates that it does not require a safety connection
to electrical earth (ground).
AC voltage : This symbol indicates that the rated voltage marked with the symbol
is AC voltage.
DC voltage : This symbol indicates that the rated voltage marked with the symbol
is DC voltage.
Caution, Consult instructions for use : This symbol instructs the user to consult the
user manual for further safety related information.
WARNING
•
To reduce the risk of re or electric shock, do not expose this appliance to rain or moisture.
•
Do not expose this apparatus to dripping or splashing. Do not put objects lled with liquids,
such as vases on the apparatus.
•
To turn this apparatus off completely, you must pull the power plug out of the wall socket.
Consequently, the power plug must be easily and readily accessible at all times.
CAUTION
•
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
•
This apparatus shall always be connected to a AC outlet with a protective grounding
connection.
•
To disconnect the apparatus from the mains, the plug must be pulled out from the mains
socket, therefore the mains plug shall be readily operable.
Safety Information
ENG - ii
A
Safety precautions
Power Supply Precautions
•
Do not overload outlets or extension cords.
-
This may result in abnormal heat or re.
•
Do not plug in or unplug the power cord with wet hands.
•
Do not place the product near heating equipment.
•
To clean the power plug blades, remove the plug from the wall outlet and wipe the blades with
a dry cloth only.
•
Do not bend the power cord or pull it forcefully.
•
Do not put heavy objects on the power cord.
•
Do not plug the power cord into a loose or damaged outlet.
•
Fully insert the power cord's plug into the wall outlet so that the plug is rmly attached to the
outlet.
-
If the connection is unstable, there is a risk of re.
•
Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage
designation of the DC adaptor corresponds to the local electrical supply.
Installation Precautions
•
Do not install the product near equipment or objects that generate heat or produce re (candles,
mosquito coils, heaters, radiators, etc.). Do not install in direct sunlight.
•
When moving the product, turn off the power and disconnect all cords (include the power cord)
from the unit.
-
A damaged cord may cause a re and poses a risk of electric shock.
•
Installing the product in environments with high heat or humidity, dust, or extreme cold, can
lead to quality problems or cause the product to malfunction. Before you install the product in
an environment that is outside the norm, please contact a Samsung dealer or service centre for
additional information.
•
When placing the product on a shelf, cabinet, or desk, make sure the top panel faces upwards.
•
Do not place the product on an unstable surface (e.g. a shaky shelf, a tilted desk, etc.).
-
Dropping the product can cause it to malfunction and poses a risk of injury. Severe vibration
or impact can also cause the product to malfunction and lead to a re hazard.
ENG - iii
•
Install your product with enough space around it for ventilation.
-
Leave at least 10cm at the rear of the product and more than 5cm on each side of the
product.
•
Keep the plastic packing materials out of reach of your children.
-
Children playing with the plastic packing materials run the risk of sufcation.
Usage Precautions
•
Using for an extended time at high volume may cause serious damage to your hearing.
-
If you are exposed to sound louder than 85db for an extended time, you may adversely
affect your hearing. The louder the sound is, the more seriously damaged your hearing
may become. Note that an ordinary conversation is between 50 to 60 db and road noise is
approximately 80 db.
•
This product contains dangerous high voltage. Do not attempt to disassemble, repair, or modify
it yourself.
-
Contact a Samsung dealer or service centre when your product is in need of repair.
•
Do not place any container that contains liquid on the product (e.g. a vase, beverages,
cosmetics, chemicals, etc.). Do do not allow any metal objects (e.g. coins, hair clips, etc.) or
ammable material (e.g. paper, matches, etc.) to enter the product (through the air vents, I/O
ports, etc.).
-
If any harmful material or liquid enters the product, turn off the product immediately, unplug
the power cord, and then contact a Samsung dealer or service centre.
•
Do not drop the product. In case of a mechanical breakdown, disconnect the power cord and
contact a Samsung dealer or service centre.
-
There is a risk of re or electric shock.
•
Do not hold or pull the product by the power cord or the signal cable.
-
A damaged cable can cause the product to malfunction, cause a re, and poses a risk of
electric shock.
•
Do not use or keep ammable materials near the product.
•
If the product emits an abnormal sound or a burnt smell or smokes, unplug the power-cord
immediately and contact a Samsung dealer or service centre.
•
If you smell gas, ventilate the room immediately. Do not touch the power plug of the product.
Do not turn the product off or on.
•
Do not strike or subject the product to a sudden shock. Do not pierce the product with a sharp
object.
ENG - iv
•
This product can be moved and placed indoors.
•
This product is not waterproof or dustproof.
•
Be careful when moving the product to avoid dropping it and possibly damaging it.
Cleaning Precautions
•
Never use alcohol, solvents, waxes, benzene, thinners, air freshener, or lubricants to clean the
product, or spray insecticide on the product.
-
Using any of these materials can discolour the exterior coating or cause it to split or peel off,
or remove the labelling on the product.
•
To clean the product, unplug the power cord, and then wipe the product with a clean, dry, soft
cloth (Microber, cotton).
-
Avoid leaving dust on the product. Dust can scratch its surface.
ENG - v
Contents
Safety Information
Regulatory Compliance Statements ...........ii
WARNING ..........................................................ii
CAUTION ............................................................ ii
Safety precautions.............................................iii
Power Supply Precautions .........................iii
Installation Precautions ..............................iii
Usage Precautions ........................................iv
Cleaning Precautions ....................................v
Getting Started
Checking the Components .............................2
Product Overview ...............................................3
Top / Front / Right Side of the Speaker ..... 3
Rear of the Speaker........................................5
Using Dial Controller .........................................6
Top of the Dial Controller .............................6
Bottom of the Dial Controller ................... 8
Connecting between the Dial
Controller and Speaker .................................9
Connecting to Bluetooth
Connecting to Wi-Fi
Connecting to an External
Device
Connecting an external device via
the AUX cable ................................................ 13
Additional Functions
Using mobile device voice recognition ... 14
Using via Wi-Fi connection........................... 16
Using 2 units - Audio Group .................... 16
Using 2 units - Stereo (Dedicated for
VL350 / VL351) ..............................................17
Connecting with a Samsung Smart TV ....19
Connecting an Amazon product ............20
Installing the Wall Mount
Appendix
Troubleshooting ...............................................26
Open Source Licence Notice .......................29
Licences ...............................................................29
Specications .................................................... 29
Additional Information .................................. 31
About the Network Connection............. 31
Works with SmartThings ...................... 31
Copyright ............................................................ 31
ENG - vi
Getting Started
A
Checking the Components
Check the components supplied with your speakers.
VL350 / VL351
Speaker Dial Controller
AC/DC Adapter
AC Plug
Connect the AC plug to the
AC/DC Adapter until you hear a
“snapping” sound to ensure they
are securely fastened.
(Dedicated for VL350 / VL351)
Quick Setup Guide Regulatory Guide
The AC plug may look different or can be an integrated unit with the AC/DC adapter.
(Dedicated for VL350 / VL351)
The AC plug cannot be removed after assembly. (Dedicated for VL350 / VL351)
VL550 / VL551
Speaker Dial Controller
AC/DC Adapter
Power Cable Quick Setup Guide Regulatory Guide
Make sure to rest the AC/DC Adapter at on a table or the oor. If you place the AC/DC Adapter so that it is
hanging with the AC cord input facing upwards, water or other foreign substances could enter the Adapter
and cause the Adapter to malfunction.
To purchase additional components or optional cables, contact a Samsung Service Centre or Samsung
Customer Care.
CAUTION
9
Do not place any items on top off or sit on the main unit.
9
Handle the product with care as it has sharp edges.
9
See the speaker's bottom for important safety information.
ENG - 2
A
Product Overview
Top / Front / Right Side of the Speaker
Bluetooth
Wi-Fi
AUX
1
2
1
Volume
adjustment
(Turning the
Touch-wheel)
Touch and drag the touch wheel clockwise to
increase the volume.
Touch and drag the touch wheel anticlockwise to
decrease the volume.
Play / Pause Touch
p
to play or pause music.
ENG - 3
2
LED
Display
LED Status
Description
Operation Mode
White
On Connected / Normal operation -
Blinking
Booting -
Ready for connecting to Dial
Controller
-
Updating the rmware -
Ready for Wi-Fi connection Wi-Fi
Blue Blinking Waiting to connect the device Bluetooth
Red On Connection error -
Yellow Blink once When the volume is set to Min or Max -
Off Off Power saver -
If not used for more than 5 minutes, the mode is changed to Standby to decrease energy consumption.
The Bluetooth / Wi-Fi / AUX button activates one function at a time.
Play / Pause and Skip features are not available in AUX mode.
Press Bluetooth button for 5 seconds or more to set up Bluetooth connection.
Mute / unmute feature can be used with the Play / Pause button while in AUX mode or Bluetooth mode
(connected to a TV).
ENG - 4
Rear of the Speaker
AUX IN
AUX IN
AUX IN
AUX IN
AUX IN
AUX IN
AUX IN
AUX IN
AUX IN
DC 24V
SERVICE
AUX IN
LAN
POWER
NETWORK
(DC IN)
POWER
SERVICE
AUX IN
LAN
RESET
CONNECT
RESET
CONNECT
(DC IN)
POWER
DC 24V
SERVICE
AUX IN
LAN
POWER
NETWORK
(DC IN)
POWER
SERVICE
AUX IN
LAN
RESET
CONNECT
RESET
CONNECT
(DC IN)
POWER
DC 24V
SERVICE
AUX IN
LAN
POWER
NETWORK
(DC IN)
POWER
SERVICE
AUX IN
LAN
RESET
CONNECT
RESET
CONNECT
(DC IN)
POWER
1
RESET Button
2
3
4
5
1
POWER (DC IN)
Jack
1. Connect the power cord to the AC/DC adapter.
(Dedicated for VL550 / VL551)
2. Connect the AC/DC adapter output power cord (round plug) to the
POWER (DC IN) port on the speaker.
2
CONNECT
Button
Press : To disconnect from or reconnect with the Dial Controller.
Long press it for 5 seconds : To initiate Wi-Fi connection.
3
LAN Jack Used to connect the speaker to the wired network.
4
AUX IN Jack Connect it to the analogue output port on an external device.
5
SERVICE Jack Used to update the speaker rmware by a service engineer.
Use Cat 7 (*STP Type) cable for the connection. (* Shielded Twisted Pair)
The RESET button is for troubleshooting.
ENG - 5
A
Using Dial Controller
Top of the Dial Controller
1
Multi-Function Button
2
LED Display
3
Volume wheel
4
Voice MIC
1
X 1
Play / Pause Touch
X 1 to play or pause music.
X 2
Play the next
music
Touch
X 2 to play the next music.
X 3
Play the previous
music
Touch
X 3 to play the previous music.
2 Sec
Mobile
device voice
recognition
Press for 2 seconds to activate the
voice recognition service in your mobile
device.
It is available only in Bluetooth mode.
ENG - 6
2
LED Display The indicator blinks, lights, or changes the colour depending on the
speaker status.
LED Status
Description
Operation Battery
Off All Off Standby Battery discharged
White
On Normal operation Fully charged
Blinking
Waiting for connection to
the speaker
-
Cyan On
Mobile voice recognition
active (Dedicated for
Bluetooth)
-
Red On
Connection to the
speaker failure
-
In error
Yellow Blink once
When the volume is set
to Min or Max
-
Pink
Blink once
after key use
-
Battery less than
10 %
On Currently charging
3
Volume
adjustment
(Turning the volume wheel)
Turn the volume wheel clockwise to increase
the volume.
Turn the volume wheel anticlockwise to
decrease the volume.
4
Voice MIC MICs that are used for mobile device voice recognition.
Play / Pause and Skip features are not available in AUX mode.
ENG - 7
Bottom of the Dial Controller
1
Remove the cover at the bottom of Dial Controller and then turn on the power.
•
Charge your Dial Controller before turning the power on.
OPEN
OPEN
OPEN
OPEN
OPEN
CONNECT
DC 5V
IN
RESET
1
2
OPEN
OPEN
CONNECT
RESET
OPEN
RESET Button
1
DC 5V IN Jack Connect the Micro USB cable to charge the Dial Controller.
2
CONNECT
Button
Try connecting to a Speaker.
2
Check the LED status (blinking in pink). If the battery level is low, charge the Dial Controller by
connecting the Micro USB cable. (For more information about the LED display, see page 7.)
It takes approximately 3 hours to fully charge the battery. Fully charged battery can last up to 90 days.
Battery life is subject to use conditions and environment.
The RESET button is for troubleshooting.
ENG - 8
Connecting between the Dial Controller and Speaker
* Before use of the Dial Controller
Charge the Dial Controller until the LED lights.
(When fully charged, the LED changes to white.)
CONNECT
DC 5V
IN
RESET
Micro USB Cable
(not supplied)
1
Press the CONNECT button on
the rear of the speaker.
DC 24V
SERVICE
AUX IN
LAN
POWER
NETWORK
(DC IN)
POWER
SERVICE
AUX IN
LAN
RESET
CONNECT
RESET
CONNECT
(DC IN)
POWER
AUX IN
AUX IN
AUX IN
CONNECT
2
Press the CONNECT button on
the bottom of the Dial Controller.
OPEN
OPEN
OPEN
CONNECT
RESET
OPEN
CONNECT
DC 5V
IN
RESET
CONNECT
3
Once the Dial Controller and speaker
are connected, you can hear voice message,
"Pairing is complete.", from speaker.
ENG - 9
You can connect a mobile device via the Bluetooth, and then enjoy sound from the speaker.
* First time connection
1
Press the Bluetooth button on the right side of the speaker for 5 seconds or more.
5 Sec
2
Select the speaker from the Bluetooth list on your mobile device and connect it.
(e.g. [AV] Samsung AKG VL5)
Mobile device
“[AV] Samsung AKG VL*”
* Reconnection
Only Step 2 is required when reconnecting to mobile devices.
Bluetooth connection allows you to use voice recognition service in your mobile device.
Connecting to Bluetooth
ENG - 10
1
Press the Wi-Fi button on the right side of the speaker to switch to Wi-Fi mode.
2
Download the SmartThings app to your mobile device and then launch it.
•
You cannot congure the settings for the devices that are not supported by the
SmartThings app.
•
SmartThings requirements : Android 6.0 or newer version / iOS 10.0 or newer version
•
To use the SmartThings app, a Samsung Account is required.
Mobile device
Android iOS
SmartThings app
3
Follow the instructions on the SmartThings app screen to complete settings.
Standby to be
connected
ConnectedSelect the device
to connect
Touch “Add device”
Connecting to Wi-Fi
ENG - 11
4
Repeat steps 1-3 to connect all speakers to the same wireless router.
•
Spotify Premium users can enjoy music by using the Spotify app.
5-1
Follow the instruction below to reconnect or connect to a new wireless router.
The speaker generates a voice
message notifying that it is now
in standby mode.
DC 24V
SERVICE
AUX IN
LAN
POWER
NETWORK
(DC IN)
POWER
SERVICE
AUX IN
LAN
RESET
CONNECT
RESET
CONNECT
(DC IN)
POWER
CONNECT
Press the CONNECT button
for 5 seconds.
5 Sec
5-2
Repeat step 3.
* Deleting a device from SmartThings app
Touch in the top
right of the device
list
Touch next to
the device to
remove
Touch "Edit"
ENG - 12
Connecting an external device via the AUX cable
You can connect a mobile device via the AUX cable, and then enjoy sound from the speaker.
1
Press the AUX button on the right side of the speaker to switch to AUX mode.
2
Connect the AUX IN port on the rear of the speaker to an external device via the AUX cable
(not supplied).
DC 24V
SERVICE
AUX IN
LAN
POWER
NETWORK
(DC IN)
POWER
SERVICE
AUX IN
LAN
RESET
CONNECT
RESET
CONNECT
(DC IN)
POWER
DC 24V
SERVICE
AUX IN
LAN
POWER
NETWORK
(DC IN)
POWER
SERVICE
AUX IN
LAN
RESET
CONNECT
RESET
CONNECT
(DC IN)
POWER
AUX Cable
(not supplied)
Rear of the speaker
External Device
(e.g. Mobile device)
Connecting to an External Device
ENG - 13
A
Using mobile device voice recognition
Dedicated functions in Bluetooth mode
This function can be used only when a mobile device is connected via Bluetooth.
The operation may differ depending on the specication of the mobile device.
Mobile Device Voice Recognition Service
2 Sec
Depending on the voice recognition service provided by your mobile device (e.g. Bixby, Siri, Google Assistant,
etc.), its availability and usage may differ.
Function example Speaking example
Listening to music Play TOP 100
Sending messages Forward my most recent text message to mom
Additional Functions
ENG - 14
1
Press the Bluetooth button on the right side of the speaker to switch to Bluetooth mode.
1-1
If you have not already, set up Bluetooth connection between the speakers and your
mobile device.
•
To connect a mobile device, please see [Connecting to Bluetooth]
Click here.
.
Mobile device
2
Press and hold the Multi-Function button on Dial Controller until LED shows cyan.
(for 2 seconds or more)
2 Sec
3
LED colour turns cyan, indicating the device’s voice recognition is activated.
Speak directly to Dial Controller to use voice recognition service.
In case of S voice on Samsung Galaxy, be sure to release the lock pattern for use of the function.
CAUTION
9
Maintain at least 1.5 cm distance between your face and Dial Controller when using voice recognition service.
ENG - 15
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191

Samsung VL351 Manuale utente

Tipo
Manuale utente
Questo manuale è adatto anche per