ProLights MOSAICOXL Manuale utente

USER MANUAL

MANUALE UTENTE

MOSAICOXL

EN - IT

OUTDOOR LED PROJECTOR

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the

characteristics stated in this instruction manual at any time and without prior notice.

All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it

REV.02-10/20

1

MOSAICOXL

Packing content

• MOSAICOXL

• Power adapter cable

• Signal adapter cable (2 pcs)

• User manual

TABLE OF CONTENTS

Safety

General instructionsGeneral instructions

Warnings and installation precautionsWarnings and installation precautions

1 Introduction

1. 1 Technical drawing 1. 1 Technical drawing

1. 2 Operating elements and connections1. 2 Operating elements and connections

2 Installation

2. 1 Mounting2. 1 Mounting

2. 2 Mounting with optional bracket2. 2 Mounting with optional bracket

3 Functions and settings

3. 1 Operation3. 1 Operation

3. 2 Basic3. 2 Basic

3. 3 Menu structure3. 3 Menu structure

3. 4 DMX Addressing 3. 4 DMX Addressing

3. 5 DMX Mode3. 5 DMX Mode

3. 6 Wireless3. 6 Wireless

3. 7 Screen3. 7 Screen

3. 8 Fixture settings3. 8 Fixture settings

3. 9 Auto test3. 9 Auto test

3. 10 Manual test3. 10 Manual test

3. 11 Advanced3. 11 Advanced

3. 12 Information on the device3. 12 Information on the device

3. 13 Operations in automatic mode3. 13 Operations in automatic mode

3. 14 DMX 5123. 14 DMX 512

3. 15 Color wheel and Rotating wheel3. 15 Color wheel and Rotating wheel

3. 16 DMX Control 3. 16 DMX Control

3. 17 Connection of the DMX lin3. 17 Connection of the DMX lin

3. 18 Construction of the DMX termination3. 18 Construction of the DMX termination

4 Maintenance

4. 1 Maintenance and cleaning the unit4. 1 Maintenance and cleaning the unit

4. 2 Trouble shooting4. 2 Trouble shooting

4. 3 Gobos replacement4. 3 Gobos replacement

2

3

4

5

6

7

8

15

16

17

18

22

24

25

31

32

33

MOSAICOXL

2

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with .

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.

Never make any modications on the unit not described in this instruction manual, otherwise you will

risk an electric shock.

• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualied electrical

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Never use the xture under the following conditions:

- in places subject to vibrations or bumps;

- in places with a temperature of over 45 °C.

• Make certain that no inammable liquids, water or metal objects enter the xture.

• Do not dismantle or modify the xture.

• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for

an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation denitively, take it to a local recycling

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• If this device will be operated in any way dierent to the one described in this manual, it may suer

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.

• Always additionally secure the projector with the safety rope. When carrying out any work, always com-

ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country

in which the xture’s being used.

• Keep any inammable material at a safe distance from the xture.

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

that their eectiveness is impaired.

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

• Do not touch the product’s housing when operating because it may be very hot.

• This product was designed and built strictly for the use indicated in this documentation. Any other use,

not expressly indicated here, could compromise the good condition/operation of the product and/or

be a source of danger.

• We decline any liability deriving from improper use of the product.

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

3

MOSAICOXL

- 1 - INTRODUCTION

1.1 TECHNICAL DRAWING

Fig.1Technical drawing

MOSAICOXL

4

1.2 OPERATING ELEMENTS AND CONNECTIONS

1. MOUNTING BRACKET

2. 2x HEXAGONAL HEAD SCREW SYSTEMS for

side, to tighten the bracket.

3. PRESSURE COMPENSATION VALVE

4. POWER IN/ OUT: for connection to a socket

(100-240V~/50-60Hz) via the supplied mains

cable.

5. DMX IN/OUT (5-pole XLR): 1 = ground, 2 =

DMX-, 3 = DMX+, 4 N/C, 5 N/C.

6. ANTENNA

7. CONTROL PANEL with display and 4 button

used to access the control panel functions and

manage them.

Fig.2

Rear panel

3

1

2

4

7

5

6

5

MOSAICOXL

- 2 - INSTALLATION

2.1 MOUNTING

MOSAICOXL may be set up on a solid and even surface. The unit can also be mounted upside down to a

cross arm. For xing, stable mounting clips are required. The mounting place must be of sucient stability

and be able to support a weight of 10 times of the unit’s weight.

When carrying out any installation, always comply scrupulously with all the regulations (particularly re-

garding safety) currently in force in the country in which the xture’s being used.

• Install the projector at a suitable location by means of the mounting bracket (1).

• Always additionally secure the projector with the safety rope from falling down. For this purpose, fas-

ten the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.

• Adjust the projector and use the knob (2) to slightly release or tighten the locking mechanism of the

bracket if is necessary.

1

2

Fig.3

MOSAICOXL

6

Fig.4 - Example with poles with square cross-section of 150x150 mm

2.2 MOUNTING WITH OPTIONAL BRACKET

MOSAICOXL bracket for wall mounting and suspension on poles with square cross-section with diam-

eter from 50x50 mm to 150x150mm or circular cross-section with diameter from 50 mm to 150 mm.

Complete kit of nuts and bolts included.

• Check that all accessories have been

supplied with the product before

installation. The manufacturer is not

responsible for any damage or loss

of accessories after opening the in-

ner packaging.

• Do not use the product for purposes

other than those described.

• When mounting / using the moun-

ting bracket, be sure to avoid dama-

ging the product and causing safety

hazards.

• Do not mount the bracket on a ver-

tical support whose surface shows

deformations, injuries, crushing, etc.

• Make sure all screws, bolts, nuts are

fully tightened.

• Make sure that no external force is

applied to the installed product.

• Locate the position of the optional

MOSUNIBRACKXL bracket at a suit-

able height..

• Both the bracket and the MOSAI-

COXL must be secured with a safety

rope.

7

MOSAICOXL

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240V~/50-60Hz). Then the unit is ready for operation

and can be operated via a DMX controller or it independently performs its show program in succession.

To switch o, disconnect the mains plug from the socket. For a more convenient operation it is recom-

mended to connect the unit to a socket which can be switched on and o via a light switch.

3.2 BASIC

MOSAICOXL has a OLED display and 4 button used to access the control panel functions and manage

them (g.4). Remove the cover from the control panel so you can set up the xture using the control panel.

MENU

UP DOWN ENTER

Used to access the menu or

to return a previous menu

option

Navigates downwards through

the menu list and increases

the numeric value when in a

function

Navigates upwards through

the menu list and decreases

the numeric value when in

a function

Used to select and store the

current menu or conrm the

current function value or

option within a menu

Fig.4 - Functions of the buttons

Mode

Enter

Up

Down

MOSAICOXL

8

3.3 MENU STRUCTURE

MENU

1 CONNECT

ð

DMX Address

ð

Value (1-512)

Default: 1

DMX Mode

ð

28 CH

30 CH

35 CH

44 CH

Default: 28CH

Wireless Receive On/O

ð

On/O

Default: O

Receive Reset

ð

Yes/No

Default: No

Wireless to DMX

ð

Yes/No

Default: No

2 SET UP

ð

Screen

ð

Backlight

ð

On

10s

20s

30s

Default: 10s

Flip Display

ð

Yes/No/Auto

Default: No

Warn Cue

ð

On/O

Default:On

Key Lock

ð

Yes/No

Default: No

Fixture

ð

Fan mode

ð

Auto/on/Silent

Default: Auto

Temperature unit

ð

°C/°F

Default: °C

Auto Test

ð

Auto Test

Manual Test

ð

Shutter

Dimmer

Color1

Cyan

Magenta

Yellow

CTO

Color

Gobo

RGobo

PrismRot

Frost1

Frost2

Focus

Zoom

Eect

REect

Iris

Fr.shutters Rot.

Fr.shutter 1 Move.

Fr.shutter 1 Swiv.

Fr.shutter 2 Move.

Fr.shutter 2 Swiv.

Fr.shutter 3 Move.

Fr.shutter 3 Swiv.

Fr.shutter 4 Move.

Fr.shutter 4 Swiv.

ð

Value (000-255) for each

function

Default:

Dimmer=255

Shutter = 255

9

MOSAICOXL

3 ADVANCED

ð

Reset

ð

All

Cyan

Magenta

Yellow

CTO

Color

Gobo

Prism

Eect

Focus

Zoom

Frost

Iris

Fr.shutters Rot.

Fr.shutter 1 M1

Fr.shutter 1 M2

Fr.shutter 2 M1

Fr.shutter 2 M2

Fr.shutter 3 M1

Fr.shutter 3 M2

Fr.shutter 4 M1

Fr.shutter 4 M2

ð

Yes/No

Adjust

(password: 050)

ð

Cyan

Magenta

Yellow

CTO

Color

Gobo

RGobo

Prism

Rot Prism

Eect

Focus

Zoom

Frost 1

Frost 2

Iris

Fr.shutters Rot.

Fr.shutter 1 M1

Fr.shutter 1 M2

Fr.shutter 2 M1

Fr.shutter 2 M2

Fr.shutter 3 M1

Fr.shutter 3 M2

Fr.shutter 4 M1

Fr.shutter 4 M2

ð

Value (000-255) for each function

Factory Reload

ð

Yes/No

4 INFORMATION

ð

Fixture Time

ð

0-9999

Default: 0

Temperature

ð

** °C

Fans Speed

ð

**%

MOSAICOXL

10

Software

Version

ð

DISP1: V1.0

DISP2: V1.0

FPGA: V2.0

CTR1:V1.0

CTR2:V1.0

CTR3:V1.0

UID

ð

15D0******

View

5 STAND ALONE

ð

Play

ð

O Default:O

Show

ð

Show 1

Show 2

Show 3

Default: Show 1

Chase

ð

Chase 1

...

Chase 8

Default: Chase 1

Scene

ð

Scene 1

…

Scene 32

Default: Scene 1

Edit Show

ð

Edit Show 1

Edit Show 2

Edit Show 3

ð

Chase 1(On-O) - Chase 8(On-O)

Default: O

Edit Chase

ð

Edit Chase 1

Edit Chase 2

Edit Chase 3

Edit Chase 4

Edit Chase 5

Edit Chase 6

Edit Chase 7

Edit Chase 8

ð

Step 1-16

O - Scenes1-32

Default: O

Edit Scenes

ð

Edit Scenes 01

Edit Scenes 02

Edit Scenes 03

......

Edit Scenes 30

Edit Scenes 31

Edit Scenes 32

ð

New/Edit scene

ð

Shutter/Dimmer/

Cyan/Magenta/

Yellow...

Shutter/Dimmer/

Cyan/Magenta/

Yellow...

Shutter/Dimmer/

Cyan/Magenta/

Yellow...

Shutter/Dimmer/

Cyan/Magenta/

Yellow...

Shutter/Dimmer/

Cyan/Magenta/

Yellow...

Shutter/Dimmer/

Cyan/Magenta/

Yellow...

Shutter/Dimmer/

Cyan/Magenta/

Yellow...

Default:

Dimmer: 255

Shutter: 255

Focus: 128

Zoom: 128

Fr.shutter 1

Move:128

Fr.shutter 1 Swiv:128

Fr.shutter 2

Move:128

Fr.shutter 2 Swiv:128

Fr.shutter 3

Move:128

Fr.shutter 3 Swiv:128

Fr.shutter 4

Move:128

Fr.shutter 4 Swiv:128

All others at 0

Copy scene

ð

O

Scenes 01

Scenes 02

Scenes 03

...

Scenes 30

Scenes 31

Scenes 32

11

MOSAICOXL

Scenes Record

ð

Scenes 01

Scenes 02

Scenes 03

......

Scenes 30

Scenes 31

Scenes 32

ð

*

DMX - Scenes Record

Slave setup

ð

Edit Scenes 01

Edit Scenes 02

......

Edit Scenes 30

Edit Scenes 32

ð

RGobo/ Focus/Zoom/RShutter

......

RGobo/ Focus/Zoom/RShutter

Default:

RGobo: 0

Focus: 128

Zoom: 128

RShutter:0

Scenes Time

ð

Scene 01 Time

Scene 02 Time

Scene 03 Time

......

Scene 30 Time

Scene 31 Time

Scene 32 Time

ð

Fade in Time

Hold Time

Fade Out Time

ð

0000.0 -

3600.0

Default: 0000:0s

0001:0s

0000:0s

Chase Time

ð

Chase 1 Time

Chase 2 Time

Chase 3 Time

Chase 4 Time

Chase 5 Time

Chase 6 Time

Chase 7 Time

Chase 8 Time

ð

0000.0 - 3600.0 Default: 0001.0s

Move blackout

ð

Scene 01

Scene 02

Scene 03

......

Scene 30

Scene 31

Scene 32

ð

O-On Default: O

6 DMX 512

MODE

ð

O/On O-On

ð

Edit

ð

Erase DMX

Show

ð

Dmx Show 1

Dmx Show 2

Dmx Show 3

Dmx Show 4

Dmx Show 5

Dmx Show 6

Dmx Show 7

Dmx Show 8

Dmx Show 9

Dmx Show 10

Dmx Show 11

Dmx Show 12

Dmx Show 13

Dmx Show 14

Dmx Show 15

Dmx Show 16

ð

No/Yes

MOSAICOXL

12

DMX Show

Record

ð

Dmx Show 1

Dmx Show 2

Dmx Show 3

Dmx Show 4

Dmx Show 5

Dmx Show 6

Dmx Show 7

Dmx Show 8

Dmx Show 9

Dmx Show 10

Dmx Show 11

Dmx Show 12

Dmx Show 13

Dmx Show 14

Dmx Show 15

Dmx Show 16

ð

No/Yes

Snapshot

ð

Snapshot1

Snapshot2

Snapshot3

Snapshot4

Snapshot5

Snapshot6

Snapshot7

Snapshot8

Snapshot9

Snapshot10

Snapshot11

Snapshot12

Snapshot13

Snapshot14

Snapshot15

Snapshot16

ð

No/Yes

Play

ð

Dmx Show

ð

Dmx Show 1

Dmx Show 2

Dmx Show 3

Dmx Show 4

Dmx Show 5

Dmx Show 6

Dmx Show 7

Dmx Show 8

Dmx Show 9

Dmx Show 10

Dmx Show 11

Dmx Show 12

Dmx Show 13

Dmx Show 14

Dmx Show 15

Dmx Show 16

ð

000-255 ms

13

MOSAICOXL

ð

Snapshot

ð

Snapshot1

Snapshot2

Snapshot3

Snapshot4

Snapshot5

Snapshot6

Snapshot7

Snapshot8

Snapshot9

Snapshot10

Snapshot11

Snapshot12

Snapshot13

Snapshot14

Snapshot15

Snapshot16

Clock Setting

ð

Current Time

2018/12/19 14:20

Clock Setting

2018/12/19 14:20

Schedule Show

ð

Schedule Show 1

Schedule Show 2

Schedule Show 3

Schedule Show 4

Schedule Show 5

Schedule Show 6

Schedule Show 7

Schedule Show 8

Schedule Show 9

Schedule Show 10

Schedule Show 11

Schedule Show 12

Schedule Show 13

Schedule Show 14

Schedule Show 15

Schedule Show 16

ð

O/On

Snapshot1

Snapshot2

Snapshot3

Snapshot4

Snapshot5

Snapshot6

Snapshot7

Snapshot8

Snapshot9

Snapshot10

Snapshot11

Snapshot12

Snapshot13

Snapshot14

Snapshot15

Snapshot16

Dmx Show 1

Dmx Show 2

Dmx Show 3

Dmx Show 4

Dmx Show 5

Dmx Show 6

Dmx Show 7

Dmx Show 8

Dmx Show 9

Dmx Show 10

ð

Week

ð

Monday

Tuesday

Wednesday

Thursday

Friday

Saturday

Sunday

Everyday

Time

ð

00:00~23:59

MOSAICOXL

14

ð

Dmx Show 11

Dmx Show 12

Dmx Show 13

Dmx Show 14

Dmx Show 15

Dmx Show 16

15

MOSAICOXL

3.4 DMX ADDRESSING

To enter the DMX mode, follow these steps:

• Press the MENU button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select Connect, then press the ENTER button to enter the

next menu.

• Press the UP/DOWN button to scroll through the menu, select DMX Address and press the ENTER key.

• Press the arrow keys to select the desired value (001-512).

• Press the ENTER key to conrm the setting.

• Press the MENU button repeatedly to exit the menu and save changes.

To able to operate the MOSAICOXL with a light controller, adjust the DMX start address for the rst a DMX

channel. If e. g. address 33 on the controller is provided for controlling the function of the rst DMX chan-

nel, adjust the start address 33 on the MOSAICOXL. The other functions of the light eect panel are then

automatically assigned to the following addresses.

An example with the start address 33 is shown below.

3.5 DMX MODE

The MOSAICOXL has 4 DMX channel congurations which can be accessed from the control panel.

• Press the MENU button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select Connect, then press the ENTER button to enter the

next menu.

• Press the UP/DOWN button to scroll through the menu, select DMX Mode and press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select DMX Mode and press ENTER to conrm

your choice.

• Use the UP/DOWN button to select the desired DMX channel conguration (28 CH, 30 CH,35 CH, 44 CH),

then press the ENTER button to conrm your choice.

• Press the MENU button repeatedly to exit the menu and save changes.

NOTE: through the 35CH mode it is possible to edit or store scenes inside the projector.

Number

DMX channels

Address of

start (example)

Address of

start (example)

Next possible start address

for unit n ° 1

Next possible start address

for unit n ° 2

Next possible start address

for unit n ° 3

28 33 33-60 61 89 117

30 33 33-62 63 93 123

35 33 33-67 68 103 138

44 33 33-76 77 121 165

MOSAICOXL

16

3.6 WIRELESS

• To enter the Wireless mode proceed in the following mode:

• Press the MENU button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select Connect, then press the ENTER button to enter the

next menu.

• Select the Wireless Receive function using the UP/DOWN buttons, then press the ENTER button.

• To activate the Wireless Receive function, use the UP/DOWN buttons and select the On option.

• Press the ENTER button to conrm the selection.

• Press the MENU button to go back or wait a few seconds to exit the setup menu.

NOTE - Once you have performed these steps, you must synchronize with any WiFi unit with which you

want to communicate by pressing the sync button on it. At this point connect the DMX console to the

WiFi unit to open the communication with the MOSAICOXL.

• To reset the unit, select the Receive Reset function using the UP/DOWN buttons, press the RIGHT button

until the display shows Connect, then select Receive Reset using the UP/DOWN buttons, then press the

ENTER button.

• To activate the mode use the UP / DOWN keys and select the Yes option.

• Press the ENTER button to conrm the selection.

• Press the MENU button to go back or wait a few seconds to exit the setup menu.

• To activate the Wireless to DMX function, use the UP / DOWN buttons to press the ENTER button until the

display shows Connect, then select Wireless to DMX, then press the RIGHT button.

• To activate the mode use the UP/DOWN buttons and select the Yes option.

• Press the ENTER button to conrm the selection.

• Press the MENU button to go back or wait a few seconds to exit the setup menu.

3.7 SCREEN

It is possible to modify the following parameters, related to the display, following the same procedure:

• Press the MENU button to access the main menu.

• Press the UP/DOWN button to scroll through the menu, select Set Up, then press the ENTER button ac-

cess the next menu.

• Press the UP/DOWN button to select Screen and press the ENTER button to proceed.

• Select the proposed option with the UP/DOWN button and press the ENTER button to conrm.

DMX512 Controller

. . . . . . . . . . . .

Fig.5 - Example 28 DMX channels conguration

DMX Address: 33 DMX Address: 117DMX Address: 61 DMX Address: 89

17

MOSAICOXL

- Backlight - Auto O display backlight. This function allows you to switch o automatically the back-

lighting of the display after a certain time which can be set using the directional keys. To have the

display always on select On or set a value between those shown (10s, 20s, 30s) to turn o the display

once the chosen time has elapsed, after exiting the menu.

- Flip Display - Display orientation. This feature allows you to rotate the display by 180 ° to get a better

view of the display when the unit is hanging upside down. Select Yes to activate the function, No to

deactivate it or Auto.

- Warn Cue - Warning of error. Use the arrow keys to select O or On depending on whether or not the

display shows error warnings.

- Key lock - With this function, you can lock the keys on the control panel to prevent, for example, tam-

pering with the settings. If this function is activated, the keys are locked automatically. To disable or

temporarily disable or disable the key lock function, press the keys in the following order to regain

access to the menu commands: UP, DOWN, UP, DOWN, ENTER. Select Yes to activate the function or

No to deactivate it.

• Press the ENTER button to conrm the selection.

• Press the MENU button repeatedly to exit the menu and to save the changes made.

3.8 FIXTURE SETTINGS

You can change the parameters for the device by following these steps:

• Press the button MENU to enter the menu mode.

• Use the buttons UP/DOWN to select Set Up. Press the button ENTER to conrm.

• Use the buttons UP/DOWN to select Fixture. Press the button ENTER to conrm.

• Press the buttons UP/DOWN to select the desired option and press the button ENTER to conrm:

- Fan Mode - Fan speed. Select the desired fan speed Auto, Silent, High through the button UP/ DOWN.

- Temperature unit. Select Temperature unit function and then choose Celsius / Fahrenheit measurement unit

then press the ENTER button to conrm the selection.

• Press the MENU button repeatedly to exit the menu and to save the changes made.

3.9 AUTO TEST

Allow checking the proper functioning of the unit. Start the automatic test in the following way:

• Press the button MENU to enter the menu mode.

• Use the buttons UP/DOWN to select the Set Up. Press the button ENTER to conrm.

• Press the buttons UP/DOWN to select the Auto Test and press ENTER to conrm.

• To conrm and start the automatic test press the MENU button.

3.10 MANUAL TEST

It allows to do adjustments on the eects through comands pannel to obtain a perfect balance between

the projectors.

• Press the button MENU to enter the menu mode.

• Press the buttons UP/DOWN to select the item Set Up. Then press the button ENTER.

• Press the buttons UP/DOWN to select the Manual Test. Then press the button ENTER.

• Select the eect you want change (Shutter, Dimmer, Color1, Cyan, Magenta, Yellow, CTO, Color, Gobo, RGobo, Prism-

Rot, Frost1, Frost2 Focus, Zoom, Eect, REect, White, Zoom, Iris, Fr.shutters Rot., Fr.shutter 1 Move., Fr.shutter 1 Swiv.,

Fr.shutter 2 Move., Fr.shutter 2 Swiv., Fr.shutter 3 Move., Fr.shutter 3 Swiv.,Fr.shutter 4 Move., Fr.shutter 4 Swiv.).Then

press the button ENTER to conrm.

• Use the directional buttons to calibrate the eect setting a value between 0 - 255. Then press the button

ENTER to conrm.

MOSAICOXL

18

• Press repeatedly the button MENU to return the menu mode.

3.11 ADVANCED

It is possible to modify the following parameters following the same procedure:

• Press the MENU button to access the main menu.

• Press the UP/DOWN button to scroll through the menu, select Advanced, then press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to select one o the following parametres:

- Reset - To start a preset program to restore the selected function (All, Cyan, Magenta, Yellow, CTO, Color,

Gobo, Prism, Eect, Focus, Zoom, Frost, Iris, Fr.shutters Rot., Fr.shutter 1 M1, Fr.shutter 1 M2, Fr.shutter 2 M1, Fr.shutter

2 M2, Fr.shutter 3 M1, Fr.shutter 3 M2, Fr.shutter 4 M1, Fr.shutter 4 M2).

- Adjust - To allows you to change all parameters. Insert the password "050" to enter. Select the desired

function (Cyan, Magenta, Yellow, CTO, Color, Gobo, RGobo, Prism, Rot Prism, Eect, Focus, Zoom, Frost 1, Frost 2, Iris,

Fr.shutters Rot., Fr.shutter 1 M1,, Fr.shutter 1 M2, Fr.shutter 2 M1, Fr.shutter 2 M2, Fr.shutter 3 M1, Fr.shutter 3 M2,

Fr.shutter 4 M1, Fr.shutter 4 M2) and the choose the value (0 - 255).

- Factory Reload - To reset the unit. Select Yes or No and select ENTER to conrm.

• Press the ENTER button to conrm the selection and wait for the selected function to be restored.

• Press the MENU button repeatedly to exit the menu and to save the changes made.

3.12 INFORMATION ON THE DEVICE

To view all the information on the device, proceed as follows:

• Press the MENU button to access the main menu. Press the UP/DOWN button to select Information, then

press the ENTER button to access the next menu.

• Press the UP/DOWN button to scroll through the menu, then select one of the following information-

and press the ENTER button to display it.- Fixture Time - Through the Fixture Time function, the operat-

ing time of the projector can be shown on the display.

- Fixture Time - To view the operating time of the projector.

- Temperature - To view the temperature of the device in °C/°F on the display.

- Fans Speed - to view on the display the fan speed present near the lamp.

- Software Version - To view the rmware version will show on the display.

- UID - To view the identication ID for the RDM control.

- View - Select the View DMX function to display all DMX menu.

• Press the MENU button repeatedly to exit the menu and to save the changes made.

3.13 OPERATIONS IN AUTOMATIC MODE

Play Show

The unit independently runs through its show. Before you send an automatic program you need to set the

drive as Master/Alone:

• Press the MENU button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Stand Alone, then press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Play and press the ENTER button to enter

the next menu.

• Press the UP/DOWN button to scroll through the menu, select Show and press ENTER to conrm your

choice.

• Press the UP/DOWN button to select the mode of operation: Show 1, Show 2, Show 3.

• Press the ENTER button to conrm your choice.

La pagina sta caricando ...

ProLights MOSAICOXL Manuale utente

ProLights MOSAICOXL Manuale utente

in altre lingue

Documenti correlati

Altri documenti