ProLights MOSAICOXL Manuale utente

Categoria
Proiettori
Tipo
Manuale utente
USER MANUAL
MANUALE UTENTE
MOSAICOXL
EN - IT
OUTDOOR LED PROJECTOR
All rights reserved by Music & Lights S.r.l. No part of this instruction manual may be
reproduced in any form or by any means for any commercial use.
In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the
characteristics stated in this instruction manual at any time and without prior notice.
All revisions and updates are available in the ‘manuals section on site www.musiclights.it
REV.01-07/19
1
MOSAICOXL
Packing content
MOSAICOXL
Power adapter cable
Signal adapter cable (2 pcs)
User manual
TABLE OF CONTENTS
Safety
General instructionsGeneral instructions
Warnings and installation precautionsWarnings and installation precautions
1 Introduction
1. 1 Description 1. 1 Description
1. 2 Technical specications1. 2 Technical specications
1. 3 Operating elements and connections1. 3 Operating elements and connections
2 Installation
2. 1 Mounting2. 1 Mounting
2. 2 Mounting with optional bracket2. 2 Mounting with optional bracket
3 Functions and settings
3. 1 Operation3. 1 Operation
3. 2 Basic3. 2 Basic
3. 3 Menu structure3. 3 Menu structure
3. 4 DMX Addressing 3. 4 DMX Addressing
3. 5 DMX Mode3. 5 DMX Mode
3. 6 Wireless3. 6 Wireless
3. 7 Screen3. 7 Screen
3. 8 Fixture settings3. 8 Fixture settings
3. 9 Auto test3. 9 Auto test
3. 10 Manual test3. 10 Manual test
3. 11 Advanced3. 11 Advanced
3. 12 Information on the device3. 12 Information on the device
3. 13 Operations in automatic mode3. 13 Operations in automatic mode
3. 14 DMX 5123. 14 DMX 512
3. 15 Color wheel and Rotating wheel3. 15 Color wheel and Rotating wheel
3. 16 DMX Control 3. 16 DMX Control
3. 17 Connection of the DMX lin3. 17 Connection of the DMX lin
3. 18 Construction of the DMX termination3. 18 Construction of the DMX termination
4 Maintenance
4. 1 Maintenance and cleaning the unit4. 1 Maintenance and cleaning the unit
4. 2 Trouble shooting4. 2 Trouble shooting
4. 3 Gobos replacement4. 3 Gobos replacement
2
2
3
3
5
6
7
8
8
9
16
16
17
17
18
18
18
19
19
19
23
25
26
31
31
32
32
33
MOSAICOXL
2
SAFETY
General instruction
The products referred to in this manual conform to the European Community Directives and are there-
fore marked with .
The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.
Never make any modications on the unit not described in this instruction manual, otherwise you will
risk an electric shock.
Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-
cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units
from indirect contact and/or shorting to earth by using appropriately sized residual current devices.
The connection to the main network of electric distribution must be carried out by a qualied electrical
installer. Check that the main frequency and voltage correspond to those for which the unit is designed
as given on the electrical data label.
This unit is not for home use, only professional applications.
Never use the xture under the following conditions:
- in places subject to vibrations or bumps;
- in places with a temperature of over 45 °C.
Make certain that no inammable liquids, water or metal objects enter the xture.
Do not dismantle or modify the xture.
All work must always be carried out by qualied technical personnel. Contact the nearest sales point for
an inspection or contact the manufacturer directly.
If the unit is to be put out of operation denitively, take it to a local recycling
plant for a disposal which is not harmful to the environment.
Warnings and installation precautions
If this device will be operated in any way dierent to the one described in this manual, it may suer
damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
short circuit, burns, electric shock, etc.
Before starting any maintenance work or cleaning the projector, cut o power from the main supply.
Always additionally secure the projector with the safety rope. When carrying out any work, always com-
ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country
in which the xture’s being used.
Keep any inammable material at a safe distance from the xture.
Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent
that their eectiveness is impaired.
The lamp (LED) shall be changed if it has become damaged or thermally deformed.
Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may
trigger epileptic seizures in photosensitive persons or persons with epilepsy.
Do not touch the product’s housing when operating because it may be very hot.
This product was designed and built strictly for the use indicated in this documentation. Any other use,
not expressly indicated here, could compromise the good condition/operation of the product and/or
be a source of danger.
We decline any liability deriving from improper use of the product.
WARNING! Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information about
the installation, usage and maintenance of the unit.
3
MOSAICOXL
- 1 - INTRODUCTION
1.1 DESCRIPTION
MOSAICOXL is an extremely powerful long-range outdoor LED xture for the projection of textures, im-
ages and logos onto buildings and landscapes. Built in a durable IP66 die-cast housing, the MOSAICO XL
oers a phenomenal output of 17’000 lumens and an extensive set of features including CMY colour mix-
ing system and prole to precisely shape the projection area. The exceptional zoom ranges from 5° to 50°
allowing this xture to be installed at any distance making it versatile in both near-eld and long-throw
installations.
1.2 TECHNICAL SPECIFICATIONS
LIGHT SOURCE
Source: 540W high-power white LED
CT: 6.000K
Luminous ux: (5°) 8’361lm - (50°) 17’042lm
Lux: (5°) 113’888lux - (50°) 3’640lx @3 m
Lux: (5°) 41’000lux - (50°) 1’310lx @5 m
Source life expectancy: >50.000 h
Other: TM-30-15RF/RG: 95/65 - TLCI: (5°) 44,2 - (50°) 42,8
OPTICS
Zoom: 5° - 50° motorised linear zoom
Lens diameter: 119mm
Lens type: high-quality glass lens optics
Focus: motorised
COLOUR SYSTEM
Colour mixing: linear CMY
CTC: linear 2600 K - 6000 K
Colour wheel: 6 dichroic lters + open
DYNAMIC EFFECTS
Shutter system: 4 shutter blades with position and ±30° angle adjustment, ±45° rotation of the com-
plete framing system
Animation wheel: animation wheel with CW and CCW rotation
Rotating gobos: 7 rotating gobos + open, interchangeable, indexing
Gobo size: gobo Ø 26,9 mm - img Ø 20,5 mm - 1,1 mm
Circular prism: 4f with bi-directional rotation, indexing
Frost: dual frost lter system, soft-edge linear frost lter, hard edge linear frost lter
Iris: 5 ~ 100% motorised linear iris
Special features: record scenes and create chases and shows throughout these scenes
BODY
Body: aluminiumdie-casting
Body colour: cool gray 6C
CONTROL
Protocols: DMX512, RDM, W-DMX
MOSAICOXL
4
DMX channels: 28 / 30 / 35channel
W-DMX: included, wireless solution receiver
RDM: RDM ready for xture remote monitor and settings
Display: black OLED touch display
Firmware upgrade: yes, via USB - DMX interface (UPBOX1) not included
Master/Slave: for synchronized operation of more units linked in a chain
ELECTRONICS
Dimmer: linear 0 ~ 100% electronic dimmer
Dimmer curves: 4 dierent dimming curves available
Strobe / shutter: 1 - 30 Hz, electronic
Battery backup: battery backup for user operation without connecting to the main power
Operating temperature: -20° ~ +45°
Flicker: icker free operation
ELECTRICAL
Power supply: 100-240 V – 50/60 Hz
Power consumption (at 230V): (static) 571 W - (dinamic) 587W
Power consumption (at 120V): (static): 592 W - (dinamic) 607W
Output (at 230V): 3 units on a single power line
Output (at 120V): 1 units on a single power line
Power factor: pF 0,97 @230 V- pF 0,99 @120 V
PHYSICAL
Cooling: forced air with IP low noise fan
Sospension and xing: hanging bracket suitable for safe hanging and positioning
Adaptors: XLR and Shuko 16A adaptors included
Signal connection: moulded IP signal IN/OUT connectors
Data connection: W-DMX receiver
Power connection: moulded IP power IN/OUT connectors
IP rating: 66 for outdoor installations
Dimensions (WxHxD): 403x462x565mm
Weight: 37kg
462
403
565
Fig.1Technical drawing
5
MOSAICOXL
1.3 OPERATING ELEMENTS AND CONNECTIONS
1. MOUNTING BRACKET
2. 2x HEXAGONAL HEAD SCREW SYSTEMS for
side, to tighten the bracket.
3. PRESSURE COMPENSATION VALVE
4. POWER IN/ OUT: for connection to a socket
(100-240V~/50-60Hz) via the supplied mains
cable.
5. DMX IN/OUT (5-pole XLR): 1 = ground, 2 =
DMX-, 3 = DMX+, 4 N/C, 5 N/C.
6. ANTENNA
7. CONTROL PANEL with display and 4 button
used to access the control panel functions and
manage them.
Fig.2
Rear panel
3
1
2
2
4
4
7
5
5
6
MOSAICOXL
6
- 2 - INSTALLATION
2.1 MOUNTING
MOSAICOXL may be set up on a solid and even surface. The unit can also be mounted upside down to a
cross arm. For xing, stable mounting clips are required. The mounting place must be of sucient stability
and be able to support a weight of 10 times of the unit’s weight.
When carrying out any installation, always comply scrupulously with all the regulations (particularly re-
garding safety) currently in force in the country in which the xtures being used.
Install the projector at a suitable location by means of the mounting bracket (1).
Always additionally secure the projector with the safety rope from falling down. For this purpose, fas-
ten the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.
Adjust the projector and use the knob (2) to slightly release or tighten the locking mechanism of the
bracket if is necessary.
1
2
Fig.3
7
MOSAICOXL
Fig.4 - Example with poles with square cross-section of 150x150 mm
2.2 MOUNTING WITH OPTIONAL BRACKET
MOSAICOXL bracket for wall mounting and suspension on poles with square cross-section with diam-
eter from 50x50 mm to 150x150mm or circular cross-section with diameter from 50 mm to 150 mm.
Complete kit of nuts and bolts included.
Check that all accessories have been
supplied with the product before
installation. The manufacturer is not
responsible for any damage or loss
of accessories after opening the in-
ner packaging.
Do not use the product for purposes
other than those described.
When mounting / using the moun-
ting bracket, be sure to avoid dama-
ging the product and causing safety
hazards.
Do not mount the bracket on a ver-
tical support whose surface shows
deformations, injuries, crushing, etc.
Make sure all screws, bolts, nuts are
fully tightened.
Make sure that no external force is
applied to the installed product.
Locate the position of the optional
MOSUNIBRACKXL bracket at a suit-
able height..
Both the bracket and the MOSAI-
COXL must be secured with a safety
rope.
MOSAICOXL
8
- 3 - FUNCTIONS AND SETTINGS
3.1 OPERATION
Connect the supplied main cable to a socket (100-240V~/50-60Hz). Then the unit is ready for operation
and can be operated via a DMX controller or it independently performs its show program in succession.
To switch o, disconnect the mains plug from the socket. For a more convenient operation it is recom-
mended to connect the unit to a socket which can be switched on and o via a light switch.
3.2 BASIC
MOSAICOXL has a OLED display and 4 button used to access the control panel functions and manage
them (g.4). Remove the cover from the control panel so you can set up the xture using the control panel.
MENU
UP DOWN ENTER
Used to access the menu or
to return a previous menu
option
Navigates downwards through
the menu list and increases
the numeric value when in a
function
Navigates upwards through
the menu list and decreases
the numeric value when in
a function
Used to select and store the
current menu or conrm the
current function value or
option within a menu
Fig.4 - Functions of the buttons
Mode
Enter
Up
Down
9
MOSAICOXL
3.3 MENU STRUCTURE
MENU
1 CONNECT
ð
DMX Address
ð
Value (1-512)
Default: 1
DMX Mode
ð
28 CH
30 CH
35 CH
Default: 28CH
Wireless Receive On/O
ð
On/O
Default: O
Receive Reset
ð
Yes/No
Default: No
Wireless to DMX
ð
Yes/No
Default: No
2 SET UP
ð
Screen
ð
Backlight
ð
On
10s
20s
30s
Default: 10s
Flip Display
ð
Yes/No/Auto
Default: No
Warn Cue
ð
On/O
Default:On
Key Lock
ð
Yes/No
Default: No
Fixture
ð
Fan mode
ð
Auto/on/Silent
Default: Auto
Temperature unit
ð
°C/°F
Default: °C
Auto Test
ð
Auto Test
Manual Test
ð
Shutter
Dimmer
Color1
Cyan
Magenta
Yellow
CTO
Color
Gobo
RGobo
PrismRot
Frost1
Frost2
Focus
Zoom
Eect
REect
Iris
Fr.shutters Rot.
Fr.shutter 1 Move.
Fr.shutter 1 Swiv.
Fr.shutter 2 Move.
Fr.shutter 2 Swiv.
Fr.shutter 3 Move.
Fr.shutter 3 Swiv.
Fr.shutter 4 Move.
Fr.shutter 4 Swiv.
ð
Value (000-255) for each
function
Default:
Dimmer=255
Shutter = 255
MOSAICOXL
10
3 ADVANCED
ð
Reset
ð
All
Cyan
Magenta
Yellow
CTO
Color
Gobo
Prism
Eect
Focus
Zoom
Frost
Iris
Fr.shutters Rot.
Fr.shutter 1 M1
Fr.shutter 1 M2
Fr.shutter 2 M1
Fr.shutter 2 M2
Fr.shutter 3 M1
Fr.shutter 3 M2
Fr.shutter 4 M1
Fr.shutter 4 M2
ð
Yes/No
Adjust
(password: 050)
ð
Cyan
Magenta
Yellow
CTO
Color
Gobo
RGobo
Prism
Rot Prism
Eect
Focus
Zoom
Frost 1
Frost 2
Iris
Fr.shutters Rot.
Fr.shutter 1 M1
Fr.shutter 1 M2
Fr.shutter 2 M1
Fr.shutter 2 M2
Fr.shutter 3 M1
Fr.shutter 3 M2
Fr.shutter 4 M1
Fr.shutter 4 M2
ð
Value (000-255) for each function
Factory Reload
ð
Yes/No
4 INFORMATION
ð
Fixture Time
ð
0-9999
Default: 0
Temperature
ð
** °C
Fans Speed
ð
**%
11
MOSAICOXL
Software
Version
ð
DISP1: V1.0
DISP2: V1.0
FPGA: V2.0
CTR1:V1.0
CTR2:V1.0
CTR3:V1.0
UID
ð
15D0******
View
5 STAND ALONE
ð
Play
ð
O Default:O
Show
ð
Show 1
Show 2
Show 3
Default: Show 1
Chase
ð
Chase 1
...
Chase 8
Default: Chase 1
Scene
ð
Scene 1
Scene 32
Default: Scene 1
Edit Show
ð
Edit Show 1
Edit Show 2
Edit Show 3
ð
Chase 1(On-O) - Chase 8(On-O)
Chase 1(On-O) - Chase 8(On-O)
Chase 1(On-O) - Chase 8(On-O)
Default: O
Edit Chase
ð
Edit Chase 1
Edit Chase 2
Edit Chase 3
Edit Chase 4
Edit Chase 5
Edit Chase 6
Edit Chase 7
Edit Chase 8
ð
Step 1-16
Step 1-16
Step 1-16
Step 1-16
Step 1-16
Step 1-16
Step 1-16
Step 1-16
O - Scenes1-32
O - Scenes1-32
O - Scenes1-32
O - Scenes1-32
O - Scenes1-32
O - Scenes1-32
O - Scenes1-32
O - Scenes1-32
Default: O
Edit Scenes
ð
Edit Scenes 01
Edit Scenes 02
Edit Scenes 03
......
Edit Scenes 30
Edit Scenes 31
Edit Scenes 32
ð
New/Edit scene
ð
Shutter/Dimmer/
Cyan/Magenta/
Yellow...
Shutter/Dimmer/
Cyan/Magenta/
Yellow...
Shutter/Dimmer/
Cyan/Magenta/
Yellow...
Shutter/Dimmer/
Cyan/Magenta/
Yellow...
Shutter/Dimmer/
Cyan/Magenta/
Yellow...
Shutter/Dimmer/
Cyan/Magenta/
Yellow...
Shutter/Dimmer/
Cyan/Magenta/
Yellow...
Default:
Dimmer: 255
Shutter: 255
Focus: 128
Zoom: 128
Fr.shutter 1
Move:128
Fr.shutter 1 Swiv:128
Fr.shutter 2
Move:128
Fr.shutter 2 Swiv:128
Fr.shutter 3
Move:128
Fr.shutter 3 Swiv:128
Fr.shutter 4
Move:128
Fr.shutter 4 Swiv:128
All others at 0
Copy scene
ð
O
Scenes 01
Scenes 02
Scenes 03
...
Scenes 30
Scenes 31
Scenes 32
MOSAICOXL
12
Scenes Record
ð
Scenes 01
Scenes 02
Scenes 03
......
Scenes 30
Scenes 31
Scenes 32
ð
*
DMX - Scenes Record
Slave setup
ð
Edit Scenes 01
Edit Scenes 02
......
Edit Scenes 30
Edit Scenes 32
ð
RGobo/ Focus/Zoom/RShutter
RGobo/ Focus/Zoom/RShutter
RGobo/ Focus/Zoom/RShutter
......
RGobo/ Focus/Zoom/RShutter
RGobo/ Focus/Zoom/RShutter
RGobo/ Focus/Zoom/RShutter
Default:
RGobo: 0
Focus: 128
Zoom: 128
RShutter:0
Scenes Time
ð
Scene 01 Time
Scene 02 Time
Scene 03 Time
......
Scene 30 Time
Scene 31 Time
Scene 32 Time
ð
Fade in Time
Hold Time
Fade Out Time
ð
0000.0 -
3600.0
Default: 0000:0s
0001:0s
0000:0s
Chase Time
ð
Chase 1 Time
Chase 2 Time
Chase 3 Time
Chase 4 Time
Chase 5 Time
Chase 6 Time
Chase 7 Time
Chase 8 Time
ð
0000.0 - 3600.0 Default: 0001.0s
Move blackout
ð
Scene 01
Scene 02
Scene 03
......
Scene 30
Scene 31
Scene 32
ð
O-On Default: O
6 DMX 512
MODE
ð
O/On O-On
ð
Edit
ð
Erase DMX
Show
ð
Dmx Show 1
Dmx Show 2
Dmx Show 3
Dmx Show 4
Dmx Show 5
Dmx Show 6
Dmx Show 7
Dmx Show 8
Dmx Show 9
Dmx Show 10
Dmx Show 11
Dmx Show 12
Dmx Show 13
Dmx Show 14
Dmx Show 15
Dmx Show 16
ð
No/Yes
13
MOSAICOXL
DMX Show
Record
ð
Dmx Show 1
Dmx Show 2
Dmx Show 3
Dmx Show 4
Dmx Show 5
Dmx Show 6
Dmx Show 7
Dmx Show 8
Dmx Show 9
Dmx Show 10
Dmx Show 11
Dmx Show 12
Dmx Show 13
Dmx Show 14
Dmx Show 15
Dmx Show 16
ð
No/Yes
Snapshot
ð
Snapshot1
Snapshot2
Snapshot3
Snapshot4
Snapshot5
Snapshot6
Snapshot7
Snapshot8
Snapshot9
Snapshot10
Snapshot11
Snapshot12
Snapshot13
Snapshot14
Snapshot15
Snapshot16
ð
No/Yes
Play
ð
Dmx Show
ð
Dmx Show 1
Dmx Show 2
Dmx Show 3
Dmx Show 4
Dmx Show 5
Dmx Show 6
Dmx Show 7
Dmx Show 8
Dmx Show 9
Dmx Show 10
Dmx Show 11
Dmx Show 12
Dmx Show 13
Dmx Show 14
Dmx Show 15
Dmx Show 16
ð
000-255 ms
MOSAICOXL
14
ð
Snapshot
ð
Snapshot1
Snapshot2
Snapshot3
Snapshot4
Snapshot5
Snapshot6
Snapshot7
Snapshot8
Snapshot9
Snapshot10
Snapshot11
Snapshot12
Snapshot13
Snapshot14
Snapshot15
Snapshot16
Clock Setting
ð
Current Time
2018/12/19 14:20
Clock Setting
2018/12/19 14:20
Schedule Show
ð
Schedule Show 1
Schedule Show 2
Schedule Show 3
Schedule Show 4
Schedule Show 5
Schedule Show 6
Schedule Show 7
Schedule Show 8
Schedule Show 9
Schedule Show 10
Schedule Show 11
Schedule Show 12
Schedule Show 13
Schedule Show 14
Schedule Show 15
Schedule Show 16
ð
O/On
Snapshot1
Snapshot2
Snapshot3
Snapshot4
Snapshot5
Snapshot6
Snapshot7
Snapshot8
Snapshot9
Snapshot10
Snapshot11
Snapshot12
Snapshot13
Snapshot14
Snapshot15
Snapshot16
Dmx Show 1
Dmx Show 2
Dmx Show 3
Dmx Show 4
Dmx Show 5
Dmx Show 6
Dmx Show 7
Dmx Show 8
Dmx Show 9
Dmx Show 10
ð
Week
ð
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Everyday
Time
ð
00:00~23:59
15
MOSAICOXL
ð
Dmx Show 11
Dmx Show 12
Dmx Show 13
Dmx Show 14
Dmx Show 15
Dmx Show 16
MOSAICOXL
16
3.4 DMX ADDRESSING
To enter the DMX mode, follow these steps:
Press the MENU button to access the main menu.
Press the UP/DOWN button to scroll the menu, select Connect, then press the ENTER button to enter the
next menu.
Press the UP/DOWN button to scroll through the menu, select DMX Address and press the ENTER key.
Press the arrow keys to select the desired value (001-512).
Press the ENTER key to conrm the setting.
Press the MENU button repeatedly to exit the menu and save changes.
To able to operate the MOSAICOXL with a light controller, adjust the DMX start address for the rst a DMX
channel. If e. g. address 33 on the controller is provided for controlling the function of the rst DMX chan-
nel, adjust the start address 33 on the MOSAICOXL. The other functions of the light eect panel are then
automatically assigned to the following addresses.
An example with the start address 33 is shown below.
3.5 DMX MODE
The MOSAICOXL has 3 DMX channel congurations which can be accessed from the control panel.
Press the MENU button to access the main menu.
Press the UP/DOWN button to scroll the menu, select Connect, then press the ENTER button to enter the
next menu.
Press the UP/DOWN button to scroll through the menu, select DMX Mode and press the ENTER button to
enter the next menu.
Press the UP/DOWN button to scroll through the menu, select DMX Mode and press ENTER to conrm
your choice.
Use the UP/DOWN button to select the desired DMX channel conguration (28 CH, 30 CH,35 CH), then
press the ENTER button to conrm your choice.
Press the MENU button repeatedly to exit the menu and save changes.
NOTE: through the 35CH mode it is possible to edit or store scenes inside the projector.
Number
DMX channels
Address of
start (example)
Address of
start (example)
Next possible start address
for unit n ° 1
Next possible start address
for unit n ° 2
Next possible start address
for unit n ° 3
28 33 33-60 61 89 117
30 33 33-62 63 93 123
35 33 33-67 68 103 138
17
MOSAICOXL
3.6 WIRELESS
To enter the Wireless mode proceed in the following mode:
Press the MENU button to access the main menu.
Press the UP/DOWN button to scroll the menu, select Connect, then press the ENTER button to enter the
next menu.
Select the Wireless Receive function using the UP/DOWN buttons, then press the ENTER button.
To activate the Wireless Receive function, use the UP/DOWN buttons and select the On option.
Press the ENTER button to conrm the selection.
Press the MENU button to go back or wait a few seconds to exit the setup menu.
NOTE - Once you have performed these steps, you must synchronize with any WiFi unit with which you
want to communicate by pressing the sync button on it. At this point connect the DMX console to the
WiFi unit to open the communication with the MOSAICOXL.
To reset the unit, select the Receive Reset function using the UP/DOWN buttons, press the RIGHT button
until the display shows Connect, then select Receive Reset using the UP/DOWN buttons, then press the
ENTER button.
To activate the mode use the UP / DOWN keys and select the Yes option.
Press the ENTER button to conrm the selection.
Press the MENU button to go back or wait a few seconds to exit the setup menu.
To activate the Wireless to DMX function, use the UP / DOWN buttons to press the ENTER button until the
display shows Connect, then select Wireless to DMX, then press the RIGHT button.
To activate the mode use the UP/DOWN buttons and select the Yes option.
Press the ENTER button to conrm the selection.
Press the MENU button to go back or wait a few seconds to exit the setup menu.
3.7 SCREEN
It is possible to modify the following parameters, related to the display, following the same procedure:
Press the MENU button to access the main menu.
Press the UP/DOWN button to scroll through the menu, select Set Up, then press the ENTER button ac-
cess the next menu.
Press the UP/DOWN button to select Screen and press the ENTER button to proceed.
Select the proposed option with the UP/DOWN button and press the ENTER button to conrm.
DMX512 Controller
. . . . . . . . . . . .
Fig.5 - Example 28 DMX channels conguration
DMX Address: 33 DMX Address: 117DMX Address: 61 DMX Address: 89
MOSAICOXL
18
- Backlight - Auto O display backlight. This function allows you to switch o automatically the back-
lighting of the display after a certain time which can be set using the directional keys. To have the
display always on select On or set a value between those shown (10s, 20s, 30s) to turn o the display
once the chosen time has elapsed, after exiting the menu.
- Flip Display - Display orientation. This feature allows you to rotate the display by 180 ° to get a better
view of the display when the unit is hanging upside down. Select Yes to activate the function, No to
deactivate it or Auto.
- Warn Cue - Warning of error. Use the arrow keys to select O or On depending on whether or not the
display shows error warnings.
- Key lock - With this function, you can lock the keys on the control panel to prevent, for example, tam-
pering with the settings. If this function is activated, the keys are locked automatically. To disable or
temporarily disable or disable the key lock function, press the keys in the following order to regain
access to the menu commands: UP, DOWN, UP, DOWN, ENTER. Select Yes to activate the function or
No to deactivate it.
Press the ENTER button to conrm the selection.
Press the MENU button repeatedly to exit the menu and to save the changes made.
3.8 FIXTURE SETTINGS
You can change the parameters for the device by following these steps:
Press the button MENU to enter the menu mode.
Use the buttons UP/DOWN to select Set Up. Press the button ENTER to conrm.
Use the buttons UP/DOWN to select Fixture. Press the button ENTER to conrm.
Press the buttons UP/DOWN to select the desired option and press the button ENTER to conrm:
- Fan Mode - Fan speed. Select the desired fan speed Auto, Silent, High through the button UP/ DOWN.
- Temperature unit. Select Temperature unit function and then choose Celsius / Fahrenheit measurement unit
then press the ENTER button to conrm the selection.
Press the MENU button repeatedly to exit the menu and to save the changes made.
3.9 AUTO TEST
Allow checking the proper functioning of the unit. Start the automatic test in the following way:
Press the button MENU to enter the menu mode.
Use the buttons UP/DOWN to select the Set Up. Press the button ENTER to conrm.
Press the buttons UP/DOWN to select the Auto Test and press ENTER to conrm.
To conrm and start the automatic test press the MENU button.
3.10 MANUAL TEST
It allows to do adjustments on the eects through comands pannel to obtain a perfect balance between
the projectors.
Press the button MENU to enter the menu mode.
Press the buttons UP/DOWN to select the item Set Up. Then press the button ENTER.
Press the buttons UP/DOWN to select the Manual Test. Then press the button ENTER.
Select the eect you want change (Shutter, Dimmer, Color1, Cyan, Magenta, Yellow, CTO, Color, Gobo, RGobo, Prism-
Rot, Frost1, Frost2 Focus, Zoom, Eect, REect, White, Zoom, Iris, Fr.shutters Rot., Fr.shutter 1 Move., Fr.shutter 1 Swiv.,
Fr.shutter 2 Move., Fr.shutter 2 Swiv., Fr.shutter 3 Move., Fr.shutter 3 Swiv.,Fr.shutter 4 Move., Fr.shutter 4 Swiv.).Then
press the button ENTER to conrm.
Use the directional buttons to calibrate the eect setting a value between 0 - 255. Then press the button
ENTER to conrm.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72

ProLights MOSAICOXL Manuale utente

Categoria
Proiettori
Tipo
Manuale utente

in altre lingue