Panasonic SCVK31 Istruzioni per l'uso

Marca: Panasonic

Modello: SCVK31

Categoria: Lettore CD

Tipo: Istruzioni per l'uso

CD Stereo System

Operating Instructions

Model No. SC-VK31

Before connecting, operating or adjusting this

product, please read these instructions completely.

Please keep this manual for future reference.

RQT7704-R

G0404CP0

En Ru

DOWN

VOLUME

RQT7704

Dear customer

Thank you for purchasing this product.

For optimum performance and safety, please read these instructions

carefully.

These operating instructions are applicable to the following system.

System SC-VK31

Main unit SA-VK31

Speakers SB-VK31

Safety precautions ................................................... 3

Supplied accessories .............................................. 3

Placement of speakers ............................................ 3

The remote control .................................................. 3

Set-up ....................................................................... 4

Front panel controls ................................................ 5

CDs ........................................................................... 6

How discs with MP3 differ from CDs ................... 10

The radio: manual tuning ...................................... 12

The radio: preset tuning........................................ 12

Cassettes ................................................................ 13

Sound quality/sound field ..................................... 13

Recording ............................................................... 13

Enjoying karaoke ................................................... 14

Optional antenna connections ............................. 15

External unit connections ..................................... 15

Using an external unit ........................................... 15

Turning the demo function on/off ........................ 16

Convenient functions ............................................ 16

Auto-off function .................................................... 16

Setting the time...................................................... 16

Using the timers .................................................... 17

Troubleshooting guide .......................................... 18

Maintenance ........................................................... 18

Specifications ........................................................ 19

Table of contents

The socket outlet shall be installed near the equipment and easily

accessible or the mains plug or an appliance coupler shall remain

readily operable.

This product may receive radio interference caused by mobile tele-

phones during use. If such interference is apparent, please increase

separation between the product and the mobile telephone.

THIS UNIT IS INTENDED FOR USE IN MODERATE

CLIMATES.

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORM-

ANCE OF PROCEDURES OTHER THAN THOSE SPECI-

FIED HEREIN MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOUR-

SELF. REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR

PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS

TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND

THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS

VASES, SHALL BE PLACED ON THE APPARATUS.

CAUTION!

•

DO NOT INSTALL OR PLACE THIS UNIT IN A

BOOKCASE, BUILT-IN CABINET OR IN ANOTHER

CONFINED SPACE. ENSURE THE UNIT IS WELL

VENTILATED. TO PREVENT RISK OF ELECTRIC

SHOCK OR FIRE HAZARD DUE TO OVERHEATING,

ENSURE THAT CURTAINS AND ANY OTHER

MATERIALS DO NOT OBSTRUCT THE VENTILATION

VENTS.

•

DO NOT OBSTRUCT THE UNIT’S VENTILATION

OPENINGS WITH NEWSPAPERS, TABLECLOTHS,

CURTAINS, AND SIMILAR ITEMS.

•

DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH

AS LIGHTED CANDLES, ON THE UNIT.

•

DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY

FRIENDLY MANNER.

Inside of product

RQT7704

Placement

Set the unit up on an even surface away from direct sunlight, high

temperatures, high humidity, and excessive vibration. These

conditions can damage the cabinet and other components, thereby

shortening the unit’s service life.

Do not place heavy items on the unit.

Voltage

Do not use high voltage power sources. This can overload the unit

and cause a fire.

Do not use a DC power source. Check the source carefully when

setting the unit up on a ship or other place where DC is used.

Power cord protection

Ensure the AC power cord is connected correctly and not damaged.

Poor connection and lead damage can cause fire or electric shock.

Do not pull, bend, or place heavy items on the cord.

Grasp the plug firmly when unplugging the cord. Pulling the AC

power cord can cause electric shock.

Do not handle the plug with wet hands. This can cause electric

shock.

Foreign matter

Do not let metal objects fall inside the unit. This can cause electric

shock or malfunction.

Do not let liquids get into the unit. This can cause electric shock or

malfunction. If this occurs, immediately disconnect the unit from the

power supply and contact your dealer.

Do not spray insecticides onto or into the unit. They contain

flammable gases which can ignite if sprayed into the unit.

Service

Do not attempt to repair this unit by yourself. If sound is interrupted,

indicators fail to light, smoke appears, or any other problem that is not

covered in these instructions occurs, disconnect the AC power cord

and contact your dealer or an authorized service center. Electric shock

or damage to the unit can occur if the unit is repaired, disassembled

or reconstructed by unqualified persons.

Extend operating life by disconnecting the unit from the power source

if it is not to be used for a long time.

Batteries

The remote control

•

Insert so the poles (+ and –) match those in the remote control.

•

Do not use rechargeable type batteries.

Do not:

•

mix old and new batteries.

•

use different types at the same time.

•

heat or expose to flame.

•

take apart or short-circuit.

•

attempt to recharge alkaline or manganese batteries.

•

use batteries if the covering has been peeled off.

•

keep together with metallic objects such as necklaces.

Mishandling of batteries can cause electrolyte leakage which can

damage items the fluid contacts and may cause a fire.

If electrolyte leaks from the batteries, consult your dealer.

Wash thoroughly with water if electrolyte comes in contact with any

part of your body.

Remove if the remote control is not going to be used for a long period

of time. Store in a cool, dark place.

Replace if the unit does not respond to the remote control even when

held close to the front panel.

Use

R6/LR6, AA, UM-3

Please check and identify the supplied accessories.

AC power supply cord ... 1 pc.

FM indoor antenna ........ 1 pc.

Video connection

cable .......................... 1 pc.

Supplied accessories

If irregular coloring occurs on your television

These speakers are designed to be used close to a television, but the

picture may be affected with some televisions and set-up combinations.

If this occurs, turn the television off for about 30 minutes.

The television’s demagnetizing function should correct the problem. If

it persists, move the speakers further away from the television.

Note

•

Keep your speakers at least 10 mm away from the system for proper

ventilation.

•

You cannot take the front net off the speakers.

Speakers are designed identically so that no left or right channel

orientation is necessary.

Safety precautions Placement of speakers

Remote control

signal sensor

Transmission

window

About 7 meters in front of

the signal sensor

Aim at the sensor, avoiding obstacles, at a maximum range of 7

meters directly in front of the unit.

•

Keep the transmission window and the unit’s sensor free from dust.

•

Operation can be affected by strong light sources, such as direct

sunlight, and the glass doors on cabinets.

Do not:

•

put heavy objects on the remote control.

•

take the remote control apart.

•

spill liquids onto the remote control.

AM loop antenna ........ 1 pc.

Batteries ................... 2 pcs.

Remote control

transmitter .................. 1 pc.

(N2QAJB000117)

RQT7704

Set-up

(L)

(R)

AM loop antenna

Stand the antenna up

on its base.

FM indoor antenna

Adhesive tape

Affix where

reception is

best.

Video connection cable

1. Connect the video connection cable from

the VIDEO OUT terminal of the rear panel of

this unit to the VIDEO IN terminal of the TV.

2. Set the VIDEO OUT switch according to the

television set to be connected.

PAL : When connecting a PAL system TV.

NTSC : When connecting an NTSC system TV.

For details, refer to the operating instructions of TV.

5 AC power supply cord 3 Speaker cords

Insertion of connector

Even when the connector is perfectly inserted, depending on

the type of inlet used, the front part of the connector may jut

out as shown in the drawing.

However there is no problem using the unit.

Note Note

The included AC power supply cord is for use with this unit

only. Do not use it with other equipment.

For your reference

Information you enter into the unit’s memory, except for time,

remains intact for up to a week after the AC power supply

cord is disconnected.

Connector

Appliance inlet

Approx. 6 mm

Caution

•

Use the speakers only with the recommended

system. Failure to do so may lead to damage

to the amplifier and/or the speakers, and may

result in the risk of fire. Consult a qualified

service person if damage has occurred or if

you experience a sudden change in

performance.

•

Do not attach these speakers to walls or

ceilings.

Use only the supplied speakers.

The combination of the main unit and speakers provide the best

sound. Using other speakers can damage the unit and sound quality

will be negatively affected.

Black (–)

Black

Grey

Blue

Blue (–)

Grey (+)

Connect the AC power supply cord only after all other

connections have been made.

Preparation

Twist and pull off the vinyl tip of the antenna wires and

speaker cords.

Red (+)

Red

Connect the left (L)

side in the same way.

RQT7704

1 AC supply indicator [AC IN]

This indicator lights when the unit is connected to the AC mains

supply.

2 Standby/on switch [

f/I]

Press to switch the unit from on to standby mode or vice versa. In

standby mode, the unit is still consuming a small amount of power.

3 Display

4 Deck select button [DECK 1/2] .............................................. 13

5 Record button [a REC] ......................................................... 14

6 Microphone volume control [MIC VOL] ............................... 14

7 Microphone jacks [MIC 1, 2] ..................................................14

8 Deck 1 cassette holder ......................................................... 13

9 Disc tray

! CD tray open/close button [c OPEN/CLOSE] ....................... 6

! CD direct play buttons [1–5] .................................................. 6

# Super sound EQ button [SUPER SOUND EQ] .................... 13

$ Built-in sound equalizer button [SOUND EQ] ......................13

% Headphones jack [PHONES] ................................................ 16

& Deck 2 cassette holder ......................................................... 13

Main unit

Center console

(

Tuner/band select button [TUNER, BAND] .......................... 12

) CD skip/search/previous/next, VCD slow advance, tape fast-

forward/rewind, tune/preset channel select, time adjust buttons

[g/REW/3, PREV, 4/FF/f, NEXT] ................... 7, 12, 13

~ Display, demonstration button [DISPLAY, –DEMO] ........... 16

+ Deck 1 open button [c DECK 1] .......................................... 13

, AUX button [AUX] .................................................................. 15

- Volume control [VOLUME DOWN, UP] ................................. 14

. CD play/pause, select button [:/J CD, SELECT] ................. 6

/ Stop/program clear, PBC on/off button [ L STOP, PBC] .... 6, 7, 13

: Deck 2 open button [c DECK 2] .......................................... 13

; Tape play/direction button [;: TAPE] ............................... 13

Remote control

Buttons such as 2 function in exactly the same way as the

buttons on the main unit.

< Sleep timer + Auto off button [SLEEP, –AUTO OFF] ....16, 17

= Multi screen button [MULTI-SCREEN] ................................... 9

> Disc button [DISC] .................................................................. 7

? Program button [PROGRAM] ..................................... 8, 11, 12

@ Time access button [TIME ACCESS] ..................................... 9

[ Play mode select button [PLAY MODE] ........................ 8, 11-14

\ Repeat button [REPEAT] ........................................................ 7

] On-screen display button [OSD] ............................................ 7

^ Tuner/band select, AUX button [TUNER/AUX] ..............12, 15

_ CD pause button [J PAUSE] .................................................. 6

{ Zoom button [ZOOM] .............................................................. 7

| CD display button [CD DISP] ........................................... 7, 10

} CD skip/search/previous/next, album skip, preset channel

select, time adjust buttons

[g f, ALBUM , PREV 3 NEXT 4] ....... 7-9, 11, 12, 16

V Shift button [SHIFT]

To use functions labeled in orange:

While pressing [SHIFT], press the corresponding button.

0 Muting button [MUTING] ....................................................... 16

1 Dimmer + Play timer/record timer button

[DIMMER, rPLAY/REC] ................................................... 16, 17

2 Clock/timer button [CLOCK/TIMER] ................................16, 17

3 Video index buttons [ V-INDEX ] ................................... 9

Resume play button [RESUME PLAY] ................................... 7

5 Return button [ ] .......................................................... 7, 10

6 Key control buttons [KEYCON, , ] ................................. 15

7 Numbered buttons [

10, 1–9, 0] .............................. 6-9, 11, 12

8 CD play, select button [: CD, SELECT] ........................... 6-10

9 Karaoke button [KARAOKE] ................................................ 14

! Cursor buttons [8, 9, ;, :]/Enter button [ENTER] .... 7, 10, 11, 13

Echo button [ECHO] ............................................................. 15

# Tape fast-forward/rewind, manual tuning, VCD slow

advance buttons [( ), REW FF] .............................. 7, 12

$ Built-in sound equalizer/manual EQ button

[SOUND EQ, –MANUAL EQ] .................................................. 13

Front panel controls

DECK 1 DECK 2

DOWN

STOP

REW

PREV NEXT

SELECT

DISPLAY

DEMO

PBC

AUX

TAP E

TUNER

BAND

RQT7704

CD selection

You can use menus displayed on the TV screen to control playback

when running interactive software.

Preparation:

Turn the television on, select video input with the television input switch.

1 Press [

c OPEN/CLOSE] to open the tray.

The unit comes on.

2 Set a CD in the tray. (Label must face upward.)

To continue loading CDs in the other trays

Press [1]–[5] to select the required tray and press [c OPEN/

CLOSE] to open the tray.

Press [c OPEN/CLOSE] to close the tray.

3 Press [1]–[5] to select the desired disc.

(Alternatively, you can press [:/J CD] if the current disc is your

desired CD.)

The track number and its elapsed playing time are shown.

The menu screen appears on the TV (with some discs, it may not

appear immediately). The menu screens that appear may differ

depending on the disc.

Some software may display the menu screen after animated or

still screens have been played.

4 Press the numbered buttons on the remote control to

select the menu item.

To select 1–9, press the corresponding numbered button.

To select a two-digit number, press [

10], and then the two numbers

you want.

For example:

Menu item 10 : [

10] ➞ [1] ➞ [0]

Menu item 25 : [

10] ➞ [2] ➞ [5]

A different menu is displayed or animated/still screens are played.

High-precision still screens are also automatically distinguished

and played.

Use the CD Play Mode function’s ALL-DISC mode to play CDs in

succession. ( A page 8) ( A page 11)

To stop

Press [L STOP].

The total number of tracks and total playing time are shown.

To pause

Main unit: Press [:/J CD] during play.

Remote Control: Press [J PAUSE]

during play.

Press [:/J CD] on the main set or [: CD] on the remote control to

resume play.

“ ” indication

It indicates current disc has 16 or more tracks.

One touch play

During standby mode and when a CD is loaded, press [:/J CD] or

[1]–[5].

The unit comes on and play starts.

This unit can play CD-DA (digital audio), MP3 and video CD format

CD-R and CD-RW that have been finalized (a process that enables

players to play CD-R and CD-RW) upon completion of recording.

It may not be able to play some CD-R or CD-RW due to the

condition of the recording.

VCD 1.1

VCD 2.0

VCD 1.1

VCD 2.0

MP3

VCD 1.1

VCD 1.1 CDVCD 2.0 MP3

Current disc indicator

CDVCD 1.1 MP3

CDs

Basic play

PBC (Playback control)

PBC is a signal recorded on version 2.0 CDs that enables you to

control playback. It makes video enjoyment more interesting by allowing

you to interact with the system via menus, search functions or other

typically computer-like operations.

Do not:

•

use irregularly shaped CDs.

•

attach extra labels and stickers.

•

use CDs with labels and stickers

that are coming off or with

adhesive exuding from under

labels and stickers.

•

attach scratch proof covers or

any other kind of accessory.

•

write anything on the CD.

•

clean CDs with liquids. (Wipe

with a soft, dry cloth.)

•

use CDs printed with label

printers available on the market.

To prevent damage

Always observe the following points:

•

Load only 1 CD on the tray.

•

Load CDs as shown in the figure.

An adaptor is not needed with 8

cm CDs (singles).

•

Set the system on a flat, level surface.

•

Always unload all CDs before moving the unit.

•

Always stop the changer before loading or changing CDs. You

cannot change CDs while a disc is playing.

Do not:

•

set the unit on top of magazines, inclined surfaces, etc.

•

move the unit while a tray is opening/closing, or when loaded.

•

put anything except a CD in the tray.

•

use cleaning CDs or CDs which are badly warped or cracked.

•

disconnect the AC power supply cord from the household AC outlet

during disc changing operation.

Disc type Logo Indication in these

operating instructions

Operated in the same way as audio

CDs, these CDs allow playback of

video pictures as well as sound, but

they are not equipped with PBC\.

Equipped with PBC\, these CDs allow

playback of menus on the TV screen

as well as high resolution still pictures.

You can use functions described for

video CD version 1.1 by turning

PBC off (see page 7)

Discs recorded with MP3

VCD 2.0

Video CD

(version 1.1)

Video CD

(version 2.0)

MP3

VCD 1.1

–

XXXX XXXX XXXXX XXXX XX

XXXX XXXX XXXXX

XXXX XXXX

cm CD

XXXXXX XXX XXXXXXX

XXXX XX XXXXX

XXXX XXXX XXXXX

XXXX XX XXXXX

XXXX XXXX XXXXX

SELECT

PREV,

PAUSE

PBC

SHIFT

REW,

RQT7704

Resume play

Remote control only

This function allows you to resume CD playback (A page 6) from the

point it was stopped at, even if the unit was turned off.

Press [SHIFT] + [RESUME PLAY] in the stop mode.

Note

Resume does not work if the tray is opened or changed, or during

program, 1-Disc Random or All-Disc Random modes.

Zoom function

Remote control only

Use the zoom function to expand a portion of the picture on your screen.

1 While paused

Press [ZOOM].

The screen will expand a portion of the picture.

2 Press [8, 9, ;, :] to view different portions of the picture.

To exit zoom function

Press [ZOOM].

Note

•

The search speed increases up to 4 steps.

•

The slow motion advance speed decreases up to 3 steps.

•

Sound may not be issued during use of the search function when

video CDs are played in menu operation.

•

When slide show-type (continuous changing of still screens) video

CD software is played in menu operation, fast-forwarding or

rewinding of the CD may not be possible.

•

During 1-RANDOM or A-RANDOM play (A page 8), you cannot

skip to tracks already played.

•

During program play, 1-RANDOM or A-RANDOM play (A page 8)

you can search only within the track.

Remote control only

1 Press [DISC] and (within 10 seconds) [1]–[5] to select the

disc.

2 Select the track with the numbered buttons.

To select track 10 or over, press [

10] then the two digits.

Play starts from the selected track.

Note

You cannot use this function with 1-RANDOM or A-RANDOM mode.

VCD 1.1 CD

Remote control only

OSD displays the CD operation, mode, and display information on a

television screen.

Press [OSD].

Every time you press the button:

OSD ON ↔ OSD OFF

Note

OSD indicators differ depending on video CD software.

CD display

Remote control only

You can display the remaining play time of the current track.

Press [CD DISP] during play or pause.

Every time you press the button:

Elapsed play time ↔ Remaining play time

Repeat play

Remote control only

Press [REPEAT] during play.

“ ” is displayed.

Note

You can use repeat mode with program play and CD play mode

functions.

(A page 8)

(A page 11)

To cancel repeat play

Press [REPEAT] to clear “ ”.

VCD 1.1

VCD 2.0

Direct access play

MP3

How to work with menus

Menus vary with the software. Press the buttons in response to what

appears on the TV and in accordance with the CD’s instructions.

(Example)

To select a menu Press the numbered buttons on the remote

item control to select the menu item.

To select track 10 or over, press [

10]

then the two digits.

To move to the Press [NEXT] or [PREV].

next/previous item

To make a selection Press [SELECT].

during PBC playback

(Depending on disc)

To return to the Press [SHIFT] + [ ] on the remote control.

previous menu

To quit menu play While in stop mode

Press [PBC]. “

PBC

OFF” appears on the display.

VCD 2.0

CD DISP

[1] – [5]

DISC

REPEAT

OSD

ZOOM

, , ,

RESUME PLAY

SHIFT

VCD 2.0 VCD 1.1

To advance in While paused

slow motion Hold down [4/FF/f] (Press [) FF] on the

remote control.)

VCD 2.0 VCD 1.1

To skip forward/ Press [g/REW/3] (backward) or

backward [4/FF/f] (forward) during play.

To search Hold down [g/REW/3] (backward) or

forward/ [4/FF/f] (forward) (Press [( REW] or

backward [) FF] on the remote control) during play.

VCD 1.1 CD MP3

VCD 2.0 VCD 1.1 CD

Television OSD indicators

(On Screen Display)

CDVCD 1.1 MP3

VCD 1.1

RQT7704

To listen to specific CDs and tracks

(CD Play Mode function)

Remote control only

Preparation: Press [: CD] and then [L CLEAR].

1 Press [PLAY MODE] to select the desired mode.

Every time you press the button:

ALL-DISC 1-RANDOM1-SONG

1-DISC

A-RANDOM

ALL-DISC: Plays all loaded discs in succession from the

selected disc to the final disc

1-SONG: Plays one selected track on the selected disc.

1-RANDOM: Plays one selected disc in random order.

A-RANDOM: Plays all loaded discs in random order.

1-DISC: Plays one selected disc.

(The original display is restored in about 2 seconds.)

Proceed to step 4 when you selected A-RANDOM in step 1.

2 Press [DISC] and (within 10 seconds) [1]–[5] to select the

disc.

The CD starts.

3 Only when you selected “1-SONG” in step 1

Select the track with the numbered buttons.

To select track 10 or over, press [

10] then the two digits.

Play starts from the selected track.

4 Only when you selected “A-RANDOM” in step 1

Press [: CD] to start play.

To stop play

Press [L CLEAR].

When playback ends

The current play mode will be retained.

Final disc

For example, if play starts from disc 4, disc 3 will be the “final disc”.

Order of progression: Disc 4

Program play

You can program up to 24 tracks.

Remote control only

Preparation: Press [

: CD] and then [L CLEAR].

1 Press [PROGRAM].

“PGM” appears.

2 Press [DISC] and (within 10 seconds) [1]–[5] to select the

disc.

3 Select the tracks with the numbered buttons.

To select track 10 or over, press [

10] then the two digits.

Repeat steps 2 and 3 to program other tracks.

4 Press [: CD] to start play.

To exit program mode

Press [PROGRAM] in the stop mode. (You can replay your program

by pressing [PROGRAM] then [: CD].)

To cancel

Press [L CLEAR] in the stop mode. “CLEAR” is displayed.

To check program contents

Press [g 3] or [f 4] while “P” is displayed.

Every time you press the button, the track number and program order

are displayed.

To add to the program

Do steps 2 and 3 while “P” is displayed.

VCD 1.1

CDs

RQT7704

To find a particular scene using a video

index number

Remote control only

A particular scene in a track you want to watch can be located by

selecting a video index number.

Check the user’s manual or other material for information on whether

video CD software contains video index numbers.

Press [SHIFT] + [V-INDEX ( ) or ( )] in the play mode to

select the video index number.

Play starts at the video index selected.

Note

With some discs, it may not be possible to make a video index search

with the motion picture.

To find a particular scene using the

time (TIME ACCESS)

This function allows you to specify a time in the current track and

begin play from that point.

Remote control only

Preparation:

Make sure OSD is on (A page 7).

1 Press the numbered buttons to select the desired track

number.

That track will start playing.

2 Press [SHIFT] + [TIME ACCESS].

The track duration appears on the TV screen.

3 Press the numbered buttons to enter the time of the

desired part.

Example:

22:40 : [2] ➞ [2] ➞ [4] ➞ [0]

00:25 : [0] ➞ [0] ➞ [2] ➞ [5]

Play starts from the selected time.

Note

The time to be entered should be a portion of the current track

time. If, for example, you are playing track 2, and you enter

“0:25”, play begins from 25 seconds into track 2.

To cancel this function

Press [SHIFT] + [TIME ACCESS] again.

Note

You cannot use time access in program, 1-Disc Random and All-Disc

Random modes.

VCD 1.1

Multi screen functions

Remote control only

There are two multi-screen modes:

DISC MULTI-SCREEN and TRACK MULTI-SCREEN.

Disc multi screen

This function divides the screen up into several parts and displays the

picture from each of the tracks. You can select the track you want

from the various pictures on the screen.

Preparation:

Make sure OSD is on (A page 7).

1 (While playback is stopped)

Press [SHIFT] + [MULTI-SCREEN].

Track 1 will first be played back for a few seconds, then will be

displayed as a still picture. The same will then happen for the

following tracks. Up to 9 tracks will be displayed on the screen at

a time.

To display subsequent tracks:

Press [f 4].

To display previous tracks:

Press [g 3].

To cancel the multi-screen mode:

Press [L CLEAR].

2 Press the numbered buttons to select the desired track

number.

That track will start playing. The number of the selected track is

displayed on the unit’s display.

For your reference:

If you press [: CD] or press [SHIFT] + [MULTI-SCREEN] as a track

is being displayed as in step 1, that track will start playing.

Note

You cannot use disc multi screen in program, 1-Disc Random and

All-Disc Random modes.

Track multi screen

A track is divided into 9 sections and those sections are shown on the

multi screen. Playback can then be started from the section of your

choice.

(During playback)

1 Press [SHIFT] + [MULTI-SCREEN].

The beginning five second segment of the track is played back,

then the last frame of the segment is displayed on the multi screen.

To cancel the multi-screen mode:

Press [L CLEAR].

2 Press the numbered buttons to select the desired

section of the track.

Playback begins from that section.

For your reference:

If you press [: CD] or press [SHIFT] + [MULTI-SCREEN] as a track

is being displayed, playback begins from that section.

Note

You cannot use track multi screen in program, 1-Disc Random and

All-Disc Random modes.

VCD 1.1

RQT7704

How discs with MP3 differ from CDs

This unit can play MP3 files recorded on CD-R/RW with a computer.

Files are treated as tracks and folders are treated as albums.

This unit can access up to 999 tracks, 195 albums and 20 sessions.

When making MP3 files to play on this unit

Disc format

Discs must conform to ISO9660 level 1 or 2 (except for extended

formats).

File format

MP3 files must have the extension “.MP3” or “.mp3”.

To play in a certain order

Prefix the folder and file names with 3-digit

numbers in the order you want to play them.

Files may not be recorded in numbered order if

the prefixes have different numbers of digits.

For example: 1????.mp3, 2????.mp3, 10????.mp3.

However, some writing software may also

cause recording to occur in a different order.

MPEG Layer-3 audio decoding technology

licensed from Fraunhofer IIS and Thomson

multimedia.

Limitations on MP3 play

•

This unit is not compatible with packet-write format.

•

When both MP3 and CD-DA data is recorded on the disc over a

number of sessions:

•

If the first session contains MP3 recordings, the unit will play from

the MP3 made in that session till the session before the first CD-DA

recordings.

•

If the first session contains CD-DA recordings, the unit will play only

the recordings made in that session. The subsequent sessions will

be ignored.

•

Maximum number of displayable characters:

Album/track title: 21

ID3 title/artist name: 24

Text data that the unit doesn’t support cannot be displayed.

(ID3 is a tag embedded in MP3 track to provide information about

the track.)

•

You cannot use 1-RANDOM play, A-RANDOM play, search function,

and time access function.

•

Some MP3 may not be played due to the condition of the disc or

recording.

•

Recordings will not necessarily be played in the order you recorded

them.

File format indicator

“.MP3”: Indicates the disc contains MP3 files

CD display for MP3

Remote control only

During play or pause

Press [CD DISP] to select a desired CD display mode.

Every time you press the button:

Album Name

Elapsed Time

Track Name

If you press the button when the track or album name

is scrolling : The next display will be shown.

ends scrolling : The current display will be shown again.

Using menus to play MP3 discs

Remote control only

Preparation:

1. Turn the television on, select the video input with the television

input switch.

2. Select the desired disc (A page 6).

1 An album list appears.

Press [8 , 9] to select an album and press [ENTER].

2 A track list appears.

Press [8 , 9] to select a track and press [: CD].

Play starts.

To stop play

Press [L CLEAR].

To return to album list while in track list

Press [SHIFT] G [ ].

SHIFT

CD DISP

root

001

001.mp3

002.mp3

003.mp3

001.mp3

002.mp3

003.mp3

002

Example:

001 ENG POP

002 ENG JAZZ

003 ENG RNB

004 ENG MUSICAL

005 ENG SOUNDTRACK

ROOT

PAGE 01/12

001 CRY ME A RIVER

002 EAST OF THE SUN

003 I'VE GOT YOU

004 HEAVEN

005 RAINBOW

002 ENG JAZZ

PAGE 01/07

002 ENG JAZZ

RAINBOW

JAMES HENSON

001 CRY ME A RIVER

002 EAST OF THE SUN

003 I'VE GOT YOU

004 HEAVEN

005 RAINBOW

PAGE 01/07

Album name

Track name

ID3 artist

name

Current album

name

ID3 title name

RQT7704

CD play mode function for MP3

Remote control only

Preparation: Press [: CD] and then [L CLEAR].

1 Press [PLAY MODE] to select the desired mode.

Every time you press the button:

ALL-DISC 1-DISC1-SONG

→→

↑

ALL-DISC: Plays all loaded discs in succession from the

selected disc to the final disc

1-SONG: Plays one selected track on the selected disc.

1-DISC: Plays one selected disc.

(The original display is restored in about 2 seconds.)

2 Press [DISC] and (within 10 seconds) [1]–[5] to select the

disc.

The CD starts.

3 When you selected “1-SONG” in step 1

Press [SHIFT] µ [ALBUM ( or )] to select the album.

Play starts from the first track of the selected album.

4 When you selected “1-SONG” in step 1

Press [f 4] or [

g 3] to select a track and press

[: CD].

Play starts.

To stop play

Press [L CLEAR].

When playback ends

The current play mode will be retained in memory until it is changed

even if the unit is turned off.

Final disc

For example, if play starts from disc 4, disc 3 will be the “final disc”.

Order of progression: Disc 4z5z1z2z3

Note

You cannot use program mode together with CD Play Mode function.

Program play for MP3

You can program up to 24 tracks.

Remote control only

Preparation:

1. Turn the television on, select the video input with the television

input switch.

2. Select the desired disc (A page 6)

3. Press [L CLEAR].

1 An album list appears.

Press [PROGRAM].

2 Press [8 , 9] to select an album and press [ENTER].

3 A track list appears.

Press [8 , 9] to select a track and press [ENTER] to

add it to the program.

Repeat this step to program other tracks.

To program from another album

1. Press [SHIFT] + [ ].

2. Do steps 2~3.

4 Press [: CD] to start play.

To exit program mode

Press [PROGRAM] in the stop mode. You can replay your

program by pressing [PROGRAM] then [: CD].

You can do the following while “P” is displayed

•

To check program contents

Press [f 4] or [

g 3].

Every time you press the button, the track number and program

order are displayed.

•

To add to the program

While checking program contents

Press [ENTER].

Do steps 2-3.

• To clear all tracks

Press [L CLEAR].

Note

•

You cannot program more than one disc for MP3.

•

You cannot program CD-DA tracks together with MP3 tracks.

•

The program memory is cleared when you change a disc or open

the CD tray.

SHIFT

RQT7704

The radio: manual tuning

Preparation:

Press [TUNER/AUX] to select “FM” or “AM”.

Automatic presetting

Do the following once each for FM and AM.

Preparation: Tune to the frequency where pre-setting is to begin.

Hold down [PROGRAM] until the frequency changes.

The tuner presets all the stations it can receive into the channels in

ascending order. When finished, the last station memorized is tuned in.

Manual presetting

Pre-set the stations one at a time.

1 Press [PROGRAM] then press [( REW] or [) FF] to tune

to the desired station.

2 Press [PROGRAM] then press [g 3] or [f 4] to select

a channel.

3 Press [PROGRAM].

The station occupying a channel is erased if another station is preset

in that channel.

Sele

cting channels

Press the numbered buttons to select the channel.

To enter channel 10 or over, press [>10], then the two digits.

1 Press [PLAY MODE] to select “PRESET”.

2 Press [g 3] or [f 4] to select the channel.

The radio: preset tuning

Remote control only

There are two methods of pre-setting stations.

Automatic presetting : All the stations the tuner can receive are

preset.

Manual presetting : You can select the stations to preset and the

order they are preset in.

Up to 15 stations each can be set in the FM and AM bands.

1 Press [TUNER, BAND] to select band.

The unit comes on.

Every time you press the button:

FM ↔ AM

2 Press [PLAY MODE] on the remote control to select

“MANUAL”.

Every time you press the button:

MANUAL ↔ PRESET

3 Hold down [

g/REW/

3] or [

4/FF/

f] for a moment

to search for a station.

The frequency stops when it finds a clear station.

To stop during the process, press [g/REW/3] or [4/FF/f].

Under excessive interference, a station may not be found.

Press [g/REW/3] or [4/FF/f] repeatedly to tune step-by-

step.

“TUNED” is displayed when a radio station is tuned.

“ST” is displayed when a stereo FM broadcast is being received.

If noise is excessive in FM

Remote control only

Hold down [PLAY MODE] to display “MONO”.

Monaural sound is selected and noise reduces when reception is

weak.

Hold down [PLAY MODE] again to cancel the mode.

“MONO” is also cancelled if the frequency is changed.

RQT7704

You can use either deck 1 or deck 2 for tape playback.

Use normal position tapes.

High position and metal position tapes can be played, but the unit will

not be able to do full justice to the characteristics of these tapes.

1 Press [;: TAPE].

The unit comes on.

If a cassette was loaded, play starts automatically (One touch play).

2 Press [c DECK 1] or [c DECK 2] and insert the cassette.

Insert with the side to be played

facing towards you and the

exposed tape facing down.

Close the holder by hand.

3 Press and hold [PLAY MODE] on the

remote control to select the reverse mode.

Every time you press and hold the button:

: One side is played.

: Both sides are played.

: Both sides are played repeatedly until [L STOP] is pressed.

To listen to 2 tapes consecutively

Load a tape into each deck and select “ ”. Both tapes will be

played repeatedly until [L STOP] is pressed.

4 Press [;: TAPE] to start playback.

Every time you press the button: ; R

↔

F :

F : : The forward (front side) will play.

; R : The reverse side will play.

To stop tape playback

Press [L STOP].

To fast-forward or rewind

Press [4/FF/f] (fast-forward) or [g/REW/3] (rewind).

To select between loaded decks

Press [DECK 1/2] (remote control: [PLAY MODE]).

Note

•

Tape playback is momentarily interrupted if you open the other deck.

•

Tapes exceeding 100 minutes are thin and can break or get caught

in the mechanism.

•

Tape slack can get caught up in the mechanism and should be

taken up before the tape is played.

•

Endless tapes can get caught up in the deck’s moving parts if used

incorrectly. Use tapes appropriate to this unit’s auto-reverse mechanism.

Selection of tapes for recording

Use normal position tapes.

High position and metal position tapes can be used, but this unit will

not be able to record or erase them correctly.

Preparation:

Wind up the leader tape so recording can begin immediately.

1 Press [c DECK 2] and insert the cassette to be recorded.

Insert with the side to be recorded facing towards you and the

exposed tape facing down.

The tape direction is automatically set to “F :”.

To record on the reverse side

Press [;: TAPE] twice, then press [L STOP].

2 Press and hold [PLAY MODE] on the remote control to

select the reverse mode.

Every time you press and hold the button:

: One side only records.

: Both sides record (forward A reverse).

“ ” is automatically changed to “ ” when [a REC] is

pressed.

3 Select source to be recorded.

Radio recording:

Tune in the station. (A page 12)

CD recording:

1 Insert the CD(s) you want to record.

Press [:/J CD] and then [L STOP].

(Continued on next page)

Cassettes

Recording

Using the built-in sound equalizer

HEAVY (sound quality) : Adds punch to rock.

SOFT (sound quality) : For background music.

CLEAR (sound quality): Clarifies higher sounds.

DISCO (sound field) : Produces sound with the same kind of

lengthy reverberations heard at a disco.

LIVE (sound field) : Makes vocals more alive.

HALL (sound field) : Adds an expansiveness to the sound to

produce the atmosphere of a great concert

hall.

Press [SOUND EQ] to select a setting.

Each time you press the button:

HEAVY SOFT CLEAR

EQ-OFF

(cancelled)

DISCO LIVE HALL

Note

You cannot use the built-in sound equalizer together with “MANUAL

EQ”.

Sound quality/sound field

Adjusting the bass and treble with

manual equalizer

1 Hold down [–MANUAL EQ] until

“MANUAL EQ” is displayed.

2 Press [;, :] to select “BASS”

“MID” or “TREBL”.

3 While displaying “BASS”, “MID” or

“TREBL”

Press [8, 9] to adjust the level

(-3 to +3).

Sound quality/sound field

S.SOUND EQ

SOUND EQ

Enhancing the sound quality

You can enhance the bass and treble effect of the sound.

Press [S.SOUND EQ] (Main unit: [SUPER SOUND EQ]).

The button light comes on.

Press the button again to cancel.

The button light goes out.

Note

You cannot use “SUPER SOUND EQ” together with the built-in sound

equalizer/“MANUAL EQ”.

1 4

DECK 1/2

Front side

RQT7704

Recording Enjoying karaoke

Side A

Tab for side B Tab for side A

Adhesive tape

Enjoying karaoke

Erasure prevention

Use a screwdriver or similar

object to break out the tab.

To re-record on a protected cassette

Cover the hole with adhesive tape.

To erase a tape

1. Disconnect the microphones.

2. Press [;: TAPE] and then [L STOP].

3. Insert the recorded tape into deck 2.

Ensure there is no tape in deck 1.

4. Press and hold [PLAY MODE] on the remote control to select

reverse mode.

5. Press [a REC].

MP3

VCD 1.1

MP3

2 Prepare the desired CD recording mode.

Remote control only

•

To record programmed tracks (A do steps 1–3 on page 8

for : “Program play” or steps 1–3 on page 11

for : “Program play for MP3”).

•

To record specific CDs/tracks

1. For , do steps 1 to 2 on page 8: “To listen

to specific CDs and tracks (CD Play Mode function)”.

Ensure CD is stopped.

For , do steps 1 to 2 on page 11: “CD play mode

function for MP3”.

2. Only for 1-SONG mode: Press [SHIFT] µ [ALBUM

( or )] to select the album.

3. Only for 1-SONG mode: Press [g

3] or [f 4] to select the track.

Tape-to-tape recording:

1 Press [;: TAPE] and then [L STOP].

2 Press [c DECK 1] and insert the cassette you want to record.

4 Press [a REC] to start recording.

To stop recording

Press [L STOP].

If the tape finishes before the CD

The CD continues playing. Press [L STOP] to stop it.

Reducing noise when recording AM

Remote control only

Hold down [PLAY MODE] while recording.

Every time you hold down the button: BP1 ↔ BP2

Choose the setting with the least noise.

Note

•

Changes to volume and sound/field quality do not affect recording.

•

You cannot open deck 1 while recording.

•

You cannot fast-forward or rewind one deck while recording with

the other.

•

When recording an AM broadcast, sound is momentarily interrupted

when you start and stop the recording.

•

While recording in reverse mode, if a track is cut off in the

middle at the end of the front side, it is re-recorded from the

beginning, on the reverse side.

At the end of the reverse side, recording stops and the current track

will be interrupted.

MP3CD

VCD 1.1

You can enjoy karaoke while watching the TV screen which displays

the motion picture and words of a song.

Soft-

ware

KARAOKE

Video CDs /

Sound multiplex

(Tape, CD)

Voice

modes

Stereo

(Tape, CD)

Non-

KARAOKE

(off) (Background \ (For singing

music+Voice) along)

V.MUTE — — \

MONO L (Background — —

music)

MONO R

——

(Voice)

Preparation:

1. Turn the television on, select the video input with the television

input switch.

2. Select the desired disc (A page 6)

1 Lower the volume with [MIC VOL], then connect the

microphone(s) (not included).

Plug type: 3.5 mm monaural

2 Press [KARAOKE] on the remote control to select the

voice mode.

Every time you press the button:

V.MUTE MONO RMONO L

(off)

Voice mode selection

If you want to play with the karaoke function, check first whether

or not your software is formatted for karaoke and then select the

voice mode as indicated below.

_: Appropriate

a: For practice, etc.

Note

A bar is indicated in the above table when the voice mode is least

effective. It is better to avoid using the mode in such cases.

V.MUTE function:

The voice portion of the track is blocked out but not the back-

ground music.

You need software recorded in stereo sound if you want to use

the voice mute function. Voice and/or static may be reproduced

with the following types of software.

•

Software recorded monaural

•

Classical music, or works performed by a limited number of

instruments

•

Chorus works or duets

3 Start the source (CD, etc.).

4 Adjust volume with [VOLUME] and [MIC VOL] and sing

along.

To cancel karaoke

Press [KARAOKE] on the remote control to select “(off)” mode.

Note

•

If strange noise (squealing or howling) is emitted during use, move

the microphone further away from the speakers, or turn down the

microphone volume.

•

When you are not using the microphone, disconnect it from the

MIC jack, and turn down the microphone volume level to MIN.

•

Sound quality and sound field can be adjusted when using karaoke

but recording will not be affected.

REC

SHIFT

ECHO

RQT7704

Changing the key

This function is available only when the “CD” input source is selected.

Remote control only

1 Press [SHIFT] + [KEYCON].

2 To raise the key by a halftone:

Press [SHIFT] + [ ].

(–7 to +7)

To lower the key by a halftone:

Press [SHIFT] + [ ].

(+7 to –7)

To cancel the key control function

Press [SHIFT] + [KEYCON] once again.

Using the echo effect

Remote control only

Press [ECHO].

Every time you press the button:

ECHO 1 ECHO 2 ECHO 4ECHO 3

OFF

Enjoying karaoke

Use outdoor antenna if radio reception is poor.

FM outdoor antenna

Optional antenna connections

To record your “karaoke” performance

Preparations:

•

Do steps 1 and 2 on page 13: “Recording”.

•

Do steps 1 and 2 on page 14: “Enjoying karaoke”.

•

When singing along with CDs

Insert the desired discs (A page 6).

•

When singing along with tape

Insert the desired tape into deck 1. (A page 13).

Press [a REC] and start karaoke performance.

To stop recording

Press [L STOP].

Note

•

To playback the recorded tape, be sure to press [KARAOKE] on

the remote control to select the “(off)” mode.

•

You cannot play or record karaoke with radio backing.

To record your voice

Preparation: Do steps 1 and 2 on page 13: “Recording”.

1. First, lower volume with [MIC VOL], then connect the microphone(s).

2. Press [a REC] to start recording.

3. Speak through the microphone and adjust volume with [VOLUME]

and [MIC VOL].

AM outdoor antenna

Run a piece of vinyl wire horizontally across a window or other

convenient location.

Leave the loop antenna connected.

Note

Disconnect the outdoor antenna when the unit is not in use.

Do not use the outdoor antenna during a lightning storm.

Optional antenna connections

External unit connections

•

An analog player with a built-in phono equalizer can be connected.

•

A video cassette recorder (VCR), or other recording equipment, can

also be connected.

•

For details, refer to the instruction manual of the units which are to

be connected.

•

When units other than those described above are to be connected,

please consult your audio dealer.

Using an external unit

Listening/Recording an external source

(See above for external unit connection)

1. Press [AUX].

The unit comes on.

2. For listening : Proceed to step 3.

For recording : Press [aREC] (recording starts).

3. Start playback from the external source. (For details, refer to the

external unit’s instruction manual.)

Recording to an external unit

1. Turn on the VCR or other recording equipment and make all

necessary settings.

2. Start recording on the VCR (or other recording equipment) and

then start playing the source to be recorded.

REC

AUX

75∞ coaxial cable (not included)

AM outdoor antenna (not included)

AM loop

antenna

(included)

Analog player

(not included)

(L)

(R)

Rear panel of this unit

VCR (not included)

LINE

OUT

AUX

(L)

(R)

(L)

(R)

Rear panel of this unit

AUDIO IN

AUDIO

OUT

•

Disconnect the FM indoor antenna.

•

The antenna should be installed by a competent technician.

5 -12

FM outdoor antenna

(not included)

RQT7704

Auto-off function

Setting the time

Remote control only

Turning the demo function on/off

To dim the display panel

Remote control only

Press [SHIFT] + [DIMMER].

The display is dimmed and the indicators are turned off.

(The AC supply indicator remains on.)

Press [SHIFT] o [DIMMER] again to restore the display.

Switching displays

Press [DISPLAY] to select the desired spectrum analyzer.

Every time you press the button:

Normal AuroraPeak hold

(OFF)

To mute the volume

Remote control only

Press [MUTING].

Press the button again to cancel.

“MUTING” goes out.

To cancel from the unit, turn [VOLUME] to minimum (--dB), then raise

it to the required level.

Muting is also cancelled when the unit is turned off.

Using headphones (not included)

Reduce the volume level and connect the headphones to the

[PHONES] jack.

Plug type: 3.5

mm stereo

Note

Avoid listening for prolonged periods of time to prevent hearing damage.

When CD or tape is selected as the source

To save power, the unit turns off if it is left unused for ten minutes.

This function does not work if the source is tuner or AUX.

Hold down [–AUTO OFF].

“AUTO OFF” is shown on the display.

The setting is maintained even if the unit is turned off.

If you select tuner or AUX as the source, “AUTO OFF” goes out. It

comes on again when you select CD or tape.

To cancel

Hold down [–AUTO OFF] again.

This is a 24-hour clock.

1 Switch on the unit.

2 Press [CLOCK/TIMER] to select “CLOCK”.

Every time you press the button:

CLOCK RECPLAY

Previous display

3 (within 7 seconds or so)

Press [g 3] or [f 4] to set the time.

4 Press [CLOCK/TIMER] to finish setting the time.

The display will return to whatever was displayed before you set

the time.

To display the time

Press [CLOCK/TIMER] once when the unit is on or at standby mode.

The time is shown for about 5 seconds.

Note

Reset the clock regularly to maintain accuracy.

Remote control only

DISPLAY

SHIFT

PHONES

AUTO OFF

Convenient functions

When the unit is first plugged in, a demonstration of its functions may

be shown on the display.

If the demo setting is off, you can show a demonstration by selecting

“DEMO ON”.

Press and hold [–DEMO].

The display changes each time the button is held down.

NO DEMO (off) ↔ DEMO ON (on)

While in the standby mode, select “NO DEMO” to reduce power

consumption.

Note

DEMO function cannot be turned on when Dimmer is on.

RQT7704

Using the timers

To cancel the timer

Press [rPLAY/REC] to clear the timer indicator from the display.

(The timer comes on at the set time everyday if the timer is on.)

To change the settings (when the unit is on)

To change the play/record times

Do steps 1, 2, 3 and 5.

To change the source or volume

1. Press [rPLAY/REC] to clear the timer indicator from the display.

2. Make changes to the source or volume.

3. Do steps 4 to 5.

To change the timer

Press [rPLAY/REC] to select the desired timer.

Every time the button is pressed:

RECPLAY

(off)

To check the settings

Press [CLOCK/TIMER] while the unit is on to select “rPLAY” or

“rREC”.

The settings are shown in the following order:

Play timer: start time→finish time→source→volume

Record timer: start time→finish time→source

To check the settings while the unit is off, press [CLOCK/TIMER]

twice.

If you use the unit after the timers are set

After using, check that the correct tape/CD are loaded before turning

the unit off.

Notes

•

If you turn the unit off and on again while a timer is functioning, the

finish time setting will not be activated.

•

If you selected AUX as the source, when the timer comes on, the

unit turns on and engages “AUX” as the source. If you want to

playback or record from a connected unit, set that unit’s timer to the

same time. (See the connected unit’s instruction manual.)

Using the sleep timer

Remote control only

This timer turns the unit off after a set time.

While enjoying the desired source:

Press [SLEEP] to select the time (minutes).

Every time you press the button:

SLEEP 90 SLEEP 120SLEEP 60SLEEP 30

SLEEP OFF

To cancel the sleep timer

Press [SLEEP] to select “SLEEP OFF”.

To confirm the remaining time

Press [SLEEP] once.

The remaining time is shown for about 5 seconds.

To change the setting

Press [SLEEP] to select the new setting.

You can use the sleep timer in combination with the play/record timer.

Make sure the unit is off before the play/record timer’s start time.

Note

The sleep timer will be turned off when you start recording from a CD.

Using the play/record timer

Remote control only

You can set the timer to come on at a certain time to wake you up

(play timer) or to record a radio station or from the aux source (record

timer).

The play and record timers cannot be used together.

Preparations:

•

Turn the unit on and set the clock (A page 16).

•

For the play timer, prepare the desired music source (tape/CD/

radio/aux), and set the volume.

•

For the record timer, check the cassette’s erasure prevention tabs

(A page 14) and insert the tape in deck 2 (A page 13). Tune to the

radio station (A page 12) or select the aux source (A page 15).

1 Press [CLOCK/TIMER] to select the timer function.

Every time you press the button:

CLOCK RECPLAY

Previous display

rPLAY: to set the play timer

rREC: to set the record timer

2 ON time setting

1 (Within 8 seconds or so)

Press [f 4] or [g 3] to set the start time.

2 Press [CLOCK/TIMER].

3 OFF time setting

1 Press [f 4] or [g 3] to set the finish time.

2 Press [CLOCK/TIMER].

The start and finish times are now set.

4 Press [rPLAY/REC] to display the timer indicator.

Every time you press the button:

RECPLAY

(off)

rPLAY: to turn the play timer on

rREC: to turn the record timer on

(The indicator doesn’t appear if the start and finish times or the

clock hasn’t been set.)

5 Press [

f] to turn the unit off.

The unit must be off for the timers to operate.

•

Play timer: Play will start in the set condition at the set time

with volume increasing gradually to the set level.

•

Record timer: The unit comes on 30 seconds before the set

time with the volume muted.

RQT7704

Before requesting service, make the checks below. If you can’t fix the system as described below, or if something not listed here occurs, refer to the

enclosed directory to locate an Authorized Service Center convenient to you or contact your dealer.

Reference pages are shown as black circled numbers ^.

Common Problems

Listening to the radio

Noise is heard.

The stereo indicator flickers

or doesn’t light.

Sound is distorted.

A beat sound is heard.

A low hum is heard during

AM broadcasts.

Use an outdoor antenna. %

Turn the TV off or separate it from the unit.

Separate the antenna from other cables and cords.

Using the cassette deck

Poor quality sound.

Recording is not possible.

The disc may be upside down. 6

Wipe the disc.

Replace the disc if it is scratched, warped, or non-standard.

Condensation may have formed inside the unit due to a sudden change in temperature. Wait about an hour

for it to clear and try again.

The disc may be scratched, or its data may be defective. Replace the disc.

The disc was incompletely formatted. Use the recording equipment to fully format the disc before recording.

There is a problem with the disc mechanism. (A power failure may have occurred.)

The tray will open automatically. Remove the disc from the tray, and after ensuring there is no disc in the tray,

close it. The unit will make the disc changing noises for a few moments and then it should operate normally.

It is possible that the setting of the video format selector of the unit’s rear panel does not agree with the TV.

Set the video format selector on the unit’s rear panel to the appropriate position. 4

Note

Depending on the TV set used, the picture may shrink vertically and black bars may appear both at the top

and bottom of the screen. This is not an indication of malfunction.

The video connection cable is not connected. Connect the video connection cable. 4

The TV is not set to video input mode. Set the TV to video input mode.

Playing discs

The display is wrong or play

won’t start.

There is a loss of picture

information or the picture is

distorted.

The total number of tracks

displayed differs each time

the same disc is inserted.

Unusual sound is heard.

CD-RW cannot be read.

“TAKE OUT/DISC” appears

on the display.

Picture is smaller than screen.

Picture appears too wide.

Picture appears in

monochrome.

The picture of the video CD

does not appear on TV.

When there is a television set nearby

Remote control

Remote control doesn’t

work.

Check if the batteries are inserted correctly. 3

Replace the batteries if they are worn.

If the surfaces are dirty

To clean this unit, wipe with a soft, dry cloth.

•

Never use alcohol, paint thinner or benzine to clean this unit.

•

Before using a chemically treated cloth, read the instructions that

came with the cloth carefully.

For a cleaner, crisper sound

Clean the heads regularly to assure good quality playback and

recording.

Use a cleaning tape (not included).

Clean the heads. See below

If the erasure prevention tabs have been removed, cover the holes with adhesive tape. $

Although the unit is in

standby mode, the display

lights up and changes

continuously.

No sound.

Sound stops.

Sound is unfixed, reversed or

comes from one speaker

only.

Humming heard during play.

“ERROR” is displayed.

“– –:– –” appears on the

display at standby mode.

“F61” is displayed.

Turn off the demo function. ^

If you set the clock, demo function will be turned off automatically. ^

Turn the volume up.

Switch off the unit, determine and correct the cause, then switch the unit on. Causes include shorting of

the positive and negative speaker wires, straining of the speakers through excessive volume or power,

and using the unit in a hot environment.

Check the speaker connections. 4

An AC power supply cord or fluorescent light is near the cables. Keep other appliances and cords away

from this unit’s cables.

Incorrect operation performed. Read the instructions and try again.

You plugged the AC power supply cord in for the first time or there was a power failure recently. Set the

time. ^

Check and correct the speaker cord connections. 4

If this does not fix the problem, there is a power supply problem. Consult the dealer.

The picture on the TV

disappears or stripes

appear on the screen.

The location and orientation of the antenna are incorrect. If you are using an indoor antenna, change to

an outdoor antenna.

The TV antenna wire is too close to the unit. Separate the antenna wire of the TV set from the unit.

Troubleshooting guide

Maintenance

RQT7704

Specifications

AMPLIFIER SECTION

RMS power output

THD 10% both channel driven

1 kHz (Low channel)

75 W per channel (6 Ω)

10 kHz (High channel)

75 W per channel (6 Ω)

Total Bi-Amp power

150 W per channel

Phone jack

Terminal Stereo, 3.5 mm jack

Aux

Input sensitivity 250 mV

Input impedance 13.3 kΩ

Mic jack

Sensitivity 0.7 mV, 680 Ω

Terminal Mono, 3.5 mm jack

(2 system)

FM TUNER SECTION

Frequency range

87.50 – 108.00 MHz (50 kHz steps)

Sensitivity 1.8 ØV (IHF)

S/N 26 dB 1.5 ØV

Antenna terminal(s) 75 Ω (unbalanced)

AM TUNER SECTION

Frequency range

522 – 1629 kHz (9 kHz steps)

Sensitivity

S/N 20 dB (at 999 kHz) 560 ØV/m

SPEAKER SECTION

Type

2 way, 2 speaker system (Bass reflex)

Speaker(s)

Woofer 16 cm cone type

Tweeter 6 cm cone type

Impedance

HIGH 6 Ω

LOW 6 Ω

Input power (IEC)

HIGH 75 W (MAX)

LOW 75 W (MAX)

Output sound pressure level

85 dB/W (1.0 m)

Cross over frequency 3 kHz

Frequency range 39 Hz–21 kHz (–16 dB)

52 Hz–20 kHz (–10 dB)

Dimensions (WxHxD) 220 x 330 x 237 mm

Mass 3.4 kg

GENERAL

Power supply AC 230–240 V, 50 Hz

Power consumption 251 W

Dimensions (WxHxD) 250 x 330 x 358 mm

Mass 7.9 kg

Power consumption in standby mode:

0.85 W

Note:

1. Specifications are subject to change

without notice.

Mass and dimensions are approximate.

2. Total harmonic distortion is measured by

the digital spectrum analyzer.

3. HIGH stands for High Frequency.

LOW stands for Low Frequency.

CASSETTE DECK SECTION

Track system 4 track, 2 channel

Heads

Record/playback Solid permalloy head

Erasure Double gap ferrite head

Motor DC servo motor

Recording system AC bias 100 kHz

Erasing system AC erase 100 kHz

Tape speed 4.8 cm/s

Overall frequency response

(+3 dB, –6 dB at DECK OUT)

NORMAL (TYPE I) 35 Hz – 14 kHz

S/N 50 dB (A-weighted)

Wow and flutter 0.18% (WRMS)

Fast forward and rewind time

Approx. 120 seconds with

C-60 cassette tape

CD SECTION

Discs played [8 cm or 12 cm]

(1) CD-Audio (CD-DA)

(2) Video CD

(3) CD-R/RW (CD-DA, Video CD,

MP3 formatted disc)

(4) MP3

Sampling frequency 44.1 kHz

Decoding 16 bit linear

Pickup

Beam source/wavelength

Semiconductor laser/ 780 nm

Number of channels Stereo

Frequency response

20 Hz–20 kHz (+1, –2 dB)

Wow and flutter Below measurable limit

Digital filter 8 fs

D/A converter MASH (1 bit DAC)

Video

Video signal system

PAL625/50, PAL525/60, NTSC

Output level

Composite video, 1 Vp-p, 75 Ω

Terminal Pin jack (1 system)

MP3

Bit rate 32 kbps – 320 kbps

Sampling frequency

32 kHz, 44.1 kHz, 48 kHz

Matsushita Electric Industrial Co., Ltd.

Web Site: http://www.panasonic.co.jp/global/

RQT7704

La pagina sta caricando ...

Panasonic SCVK31 Istruzioni per l'uso

Marca: Panasonic

Modello: SCVK31

Categoria: Lettore CD

Tipo: Istruzioni per l'uso

Scarica il pdf

rapporto

in altre lingue

English: Panasonic SCVK31 Operating instructions

Panasonic SCVK31 Istruzioni per l'uso

Panasonic SCVK31 Istruzioni per l'uso

in altre lingue

Documenti correlati

Altri documenti