Philips PPX520 Guida utente

EN User Manual

FR Manuel utilisateur

DE Bedienungsanleitung

ES Manual de usuario

IT Manuale d’uso

NL Gebruiksaanwijzing

RU Руководство пользователя

TR Kullanım Kılavuzu

Register your product and get support at

www.philips.com/support

PPX520

PicoPix Max One

Portable projector

User Manual

Register your product and get support at

www.philips.com/support

PPX520

PicoPix Max One

Portable projector

Introduction ��3

Dear customer ...............................................................3

About this user manual ..............................................3

What’s in the box ..........................................................3

Customer service centre ............................................3

1 General safety information �� 4

Setting up the product .............................................. 4

Repairs ............................................................................ 4

Power supply .................................................................5

2 Overview ��5

Top view ...........................................................................5

Front view ........................................................................5

Rear view ........................................................................ 6

Remote control............................................................. 6

3 Connect ��7

HDMI connection for image projection ................7

USB-C connection for image projection ..............7

4 Operation �� 8

Place the projector...................................................... 8

Connect power supply .............................................. 8

Prepare the remote control ..................................... 8

Power on and set up .................................................. 9

Placement options .....................................................10

5 Other features ��11

Listen through external speakers or

headphones ..................................................................11

Charge a USB device .................................................12

Use easy link ................................................................12

6 Change settings �� 13

Language settings ...................................................... 13

Input source selection ..............................................13

Picture settings ............................................................13

Power control settings .............................................. 14

Restore default settings ........................................... 14

Other settings ..............................................................14

7 Service ��15

Built-in battery care ..................................................15

Cleaning ......................................................................... 15

Update software .........................................................15

Troubleshooting .......................................................... 16

8 Appendix ��18

Technical data .............................................................18

CE statement ...............................................................19

FCC statement .............................................................19

Canada regulatory compliance .............................19

Other notice .................................................................. 19

Table of contents

Introduction 3

Introduction

Dear customer

Thank you for purchasing this projector.

We hope you enjoy this product and the many

functions it offers!

About this user manual

The quick start guide supplied with this product

allows you to start using this product quickly

and easily. Detailed descriptions can be found

in the following sections of this user manual.

Read the entire user manual carefully. Follow

all safety instructions in order to ensure proper

operation of this product (see General safety

information, page 4). The manufacturer

accepts no liability if these instructions are not

followed.

Symbols used

Notice

Troubleshooting

This symbol indicates tips that will help

you in using this product more effectively

and easily.

DANGER!

Danger of personal injury!

This symbol gives warning of danger

of personal injury. Physical injury or

damage can result from improper

handling.

CAUTION!

Damage to the product or loss of data!

This symbol gives warning of damage

to the product and possible loss of

data. Damage can result from improper

handling.

What’s in the box

a Quick Start Guide

b PicoPix Max One projector (PPX520/INT)

c Transport bag

d 2x power plug adapter (UK, US)

e 2x AAA batteries

f 1x power adapter

g Remote control

d

c

e

f

g

b

a

Quick Start

Guide

Customer service centre

You can find the support hotline in the warranty

card or online:

Web: www.philips.com/support

Mail: philips.projector.eu@screeneo.com

International Phone: +41 215 391 665

Please ask your provider for international call

costs!

Access the electronic user manual at

https://support.philipsprojection.com

Access the community forum at

https://community.philipsprojection.com

4 Philips · PicoPix Max One

1 General safety

information

Take note of all warning and safety notes

indicated. Do not make any changes or settings

that are not described in this user manual.

Incorrect operation, and improper handling can

lead to physical injury, damage to the product

or loss of data.

Setting up the product

This product is for indoor use only. Place the

product securely on a stable, flat surface.

To help avoid possible injuries to persons or

damage to the product itself, position all cables

in such a way that no one will trip over them.

Do not operate the product in damp rooms.

Never touch the mains cable or the mains

connection with wet hands.

The product must have sufficient ventilation

and must not be covered. Do not put the

product in closed cabinets, boxes, or other

enclosures when in use. Do not cover the lens

during operation.

Protect the product from direct sunlight,

heat, intense temperature fluctuations and

moisture. Do not place the product in the

vicinity of heaters or air conditioners. Observe

the information on temperature listed in the

technical data (see Technical data, page 18).

Prolonged operation of the product causes

the surface to become warm hot. In case of

overheating, the product automatically switches

to standby mode.

Do not allow liquids to leak into the product.

Turn off the product and disconnect it from the

mains supply if liquids or foreign substances

leaked into the product. Have the product

inspected by an authorised service centre.

Always handle the product with care. Avoid

touching the lens. Never place heavy or sharp

objects on the product or on the power cable.

If the product gets too hot or emits smoke,

shut it down immediately and unplug the

power cable. Have your product checked by

an authorised service centre. Keep the product

away from open flames (e.g. candles).

The product has built-in battery. Do not

dissemble and modify. The built-in battery

should be replaced by qualified service staff

only.

Do not try to replace the built-in battery

yourself. Incorrect handling of the battery or

using the wrong type of battery can cause

damage to the product or cause injury.

DANGER!

Risk of explosion with incorrect type

of batteries!

There is a risk of explosion if the wrong

battery type is used.

Do not expose the batteries (battery pack or

embedded batteries) to excessive heat such as

sunshine, or open fire.

Under the following conditions, a layer of

moisture can appear inside the product which

can lead to malfunctions:

• if the product is moved from a cold to a

warm area;

• after a cold room is heated;

• when the product is placed in a damp

room.

Proceed as follows to avoid any moisture

buildup:

1 Seal the product in a plastic bag before

moving it to another room, in order for it to

adapt to room conditions.

2 Wait one to two hours before you take the

product out of the plastic bag.

The product should not be used in a very dusty

environment. Dust particles and other foreign

objects may damage the product.

Do not expose the product to extreme

vibrations. This may damage the internal

components.

Do not allow children to handle the product

without supervision. The packing materials

should be kept out of the hands of children.

For your own safety, do not use the product

during thunderstorms with lightning.

Repairs

Do not repair the product yourself. Improper

maintenance can result in injuries or damage to

the product. The product must be repaired by

an authorised service centre.

Please find the details of authorised service

centres on the warranty card supplied with this

product.

Do not remove the type label from this product,

as this will void the warranty.

Overview 5

Power supply

Use only a power adapter which is certified for

this product (see Technical data, page 18).

Check whether the mains voltage of the power

supply matches the mains voltage available at

the setup location. This product complies with

the voltage type specified on the product.

The power outlet shall be installed near the

product and shall be easily accessible.

The capacity of the built-in battery diminishes

with time. If the product functions only with AC

power supply, the built-in battery is defective.

Contact an authorised service centre to replace

the built-in battery.

CAUTION!

Always use the button to turn the

projector off.

Turn off the product and unplug from the

power outlet before cleaning the surface

(see Cleaning, page 15). Use a soft, lint-

free cloth. Never use liquid, gaseous or easily

flammable cleaners (sprays, abrasives, polishes,

alcohol). Do not allow any moisture to reach

the interior of the product.

DANGER!

Risk of eye irritation!

This product is equipped with a high

power LED (Light Emitting Diode),

which emits very bright light. Do not

look directly into the projector lens

during operation. This could cause eye

irritation or damage.

2 Overview

Top view

a b c d d

Max One

OK

a LED indication

b

Return to a previous menu screen.

c

• Navigate menu options�

• Decrease volume.

d

• Navigate menu options�

• Increase volume.

e

• Access the settings menu.

• Confirm a selection or entry.

Front view

a

b

a Projection lens

b Focus camera

Adjust image sharpness.

6 Philips · PicoPix Max One

Rear view

HDMI USB DC

a b c d e f g

a

• Press and hold for one second to switch

the projector on or off.

• When the projector is switched on, the

LED turns white. When the projector is

switched off, the LED turns off.

• When charging the projector, the LED

turns red regardless of the projector

switching on or off.

b IR sensor

c HDMI port

Connect to the HDMI output on a playback

device.

d

3.5 mm audio output; connect to external

speakers or headphones.

e USB-A port

Connect to power USB devices like Amazon

Fire TV stick®, Roku® streaming stick (not

for mass storage or media player).

f USB-C

• Connect to the USB-C video output on

a playback device.

• Charge a USB-C device like a

smartphone.

g DC

Connect to the power supply.

Remote control

OK

a

d

e

b

c

f

g

h

a

• Quick access and select an input

source.

• Access the settings menu.

b

Confirm a selection or entry.

c

Activate focus adjustment.

d

Access the settings menu.

e Volume control

Increase, decrease or mute volume.

f

Return to a previous menu screen.

g Navigation buttons

Navigate menu options.

h

Press and hold for one second to switch the

projector on or off.

Connect 7

3 Connect

Notice

You need to connect the projector to

an HDMI or USB-C device, so that the

projection screen can show images.

Make sure all devices are disconnected

from the power outlet before establishing

or changing any connections.

HDMI connection for image

projection

Connect a playback device (e.g. a Blu-ray

player, gaming console, camcorder, digital

camera or PC) to the projector through HDMI

connection. With this connection, images are

shown on the projection screen, and audio is

played on the projector.

1 Using an HDMI cable, connect the HDMI

connector on the projector to the HDMI

output on the playback device.

HDMI USB DC

2 The projector automatically switches to

HDMI input when HDMI connection is

made. The projection screen shows images.

• If the projection screen does not show

images, select HDMI input manually. Press

on the remote control to access input

source list, then select HDMI.

USB-C connection for

image projection

Connect a USB-C device (e.g. a mobile phone,

tablet or laptop) to the projector through USB-C

connection. With this connection, images are

shown on the projection screen, and audio is

played on the projector.

1 Using a USB-C cable, connect the

connector on the projector to the USB-C

port on the playback device.

HDMI USB DC

2 The projector automatically switches to

USB-C input when USB-C connection is

made. The projection screen shows images.

• If the projection screen does not show

images, select USB-C input manually. Press

on the remote control to access input

source list, then select USB-C.

Notice

The projector supports stereo audio

format only. If no audio from the

playback device is heard on the

projector, check that the audio output

format is set to stereo on the playback

device.

8 Philips · PicoPix Max One

4 Operation

Notice

You need to connect the projector to

an HDMI or USB-C device, so that the

projection screen can show images (see

Connect, page 7).

Place the projector

Place the projector on a flat surface in front of

the projection surface.

You can also install the projector in different

configurations (see Placement options, page

10).

Connect power supply

The projector can be operated by either

external power or built-in battery.

CAUTION!

Always use the button to turn the

projector on and off.

Operation by external power

• Connect the supplied power adapter to the

socket on the projector, and then to the

wall outlet.

HDMI USB DC

a

b

If needed, select an appropriate power plug

for connecting to the wall outlet.

To attach a supplied power plug to the

power adapter, align the slots on the

power plug with the two pins of the power

adapter, then slide the power plug in.

Operation by built-in battery

The projector can be also operated on built-in

battery for portability.

Charge the projector

Charge the projector for 1.5 hours before first

use.

Charge the projector when the low battery icon

appears in the projection screen.

• To charge the projector, connect the

projector to an external power supply as

described in the section of “Operation by

external power”.

• When charging, the LED on the projector

turns red. When fully charged, the red LED

turns off.

• When powered on, the external power

will be used first to run the projector and

unused power will charge the battery.

• For faster charging, charge while the

projector is powered off.

Notice

The capacity of the built-in battery

diminishes with time. If the projector

functions only with external power

supply, the built-in battery is defective.

Contact an authorised service centre to

replace the built-in battery.

Prepare the remote control

CAUTION!

The improper use of batteries can lead

to overheating, explosion, risk of fire and

injury. Leaking batteries can possibly

damage the remote control.

Never expose the remote control to

direct sunlight.

Avoid deforming, dismantling or charging

the batteries.

Avoid exposure to open fire and water.

Replace empty batteries immediately.

Remove the batteries from the remote

control if not in use for long periods of

time.

1 Press and hold the battery compartment

cover, and simultaneously slide it open to

access the battery compartment.

2 Insert the supplied batteries (type AAA)

with correct polarity (+/- ) indicated.

3 Close the battery compartment.

Notice

Operation 9

When using the remote control, point the

remote control at the IR sensor located

on the back of the projector, and make

sure there is no obstacle between the

remote control and the IR sensor.

Power on and set up

1 Press and hold on the projector (or on

the remote control) for 1 second to switch

the projector on or off.

• When the projector is switched on, the

LED on the projector turns white if the

projector is not being charged.

• When charging, the LED on the

projector turns red regardless of the

projector switching on or off.

Set up the language

1 Press on the remote control to access

the settings menu, then navigate to select

Language, and press OK.

2 Press / to select a language.

Change screen size

The projection screen size (or size of images) is

determined by the distance between the lens

of the projector and the projection surface.

• The projection distance needs to be 1.2 times

the width of your desired screen size.

• You can also use the digital zoom to reduce

the screen size up to 50%. Press on the

remote control to access the settings menu,

then navigate to select Digital Zoom, and

press OK. Then press / to adjust image

size.

Image focus adjustment

Press on the remote control to turn focus

adjustment on, then press / on the remote

control to adjust image clearness. After

adjusting image clearness, press to turn

focus adjustment off.

Image shape correction

Auto correction (vertical keystone)

The projector can automatically correct the

image to be rectangular when you tilt the

projector upwards or downwards.

To enable auto vertical keystone correction,

press on remote control to access the

settings menu, then navigate to select Auto

Keystone - On.

Manual keystone (4-corner correction)

You can manually adjust the image shape by

re-positioning four corners of the projection

image. This also lets you correct for left or right

position of the projector.

1 Make sure you have selected Auto Keystone

- Off to enable this function. Press on

the remote control to access the settings

menu, then navigate to select Manual

Keystone.

2 In the 4-corner correction interface, press

OK to select an image corner, then press

and hold / on the remote control to

adjust the horizontal positioning values,

and / on the remote control to adjust

the vertical positioning values. Repeat the

same step to adjust positioning values of

the other image corners if desired.

10 Philips · PicoPix Max One

Manual horizontal correction

You can manually correct keystone or distorted

images in the horizontal orientation.

1 Make sure you have selected Auto Keystone

- Off to enable this function. Press on

the remote control to access the settings

menu, then navigate to select Manual

Horiz. Keyst.

2 Press / to adjust the image shape.

Calibration

Correct the image to be rectangular when the

projector is placed level, or if the auto keystone

correction does not correct the image ideally.

Perform image shape calibration as follows.

1 Make sure you have selected Auto Keystone

- Off to enable this function. Place the

projector on the floor, or a straight (level)

surface.

2 Press on the remote control to access

the settings menu, then navigate to select

Keystone Calibration.

Placement options

You can install the projector in the following

configurations. Follow the guidelines below for

different projector placement.

Notice

For overhead mounting on ceiling,

purchase a projector mount

recommended by an installation

professional and follow the instructions

that come with the mount.

Before mounting on the ceiling, make

sure the ceiling can support the weight

of the projector and mounting kit.

For ceiling installation, this product

must be securely attached to the ceiling

in accordance with the installation

instructions. An improper ceiling

installation may result in accident, injury

or damage.

Front table

1 Place the projector on a table in front of the

projection screen. This is the most common

way to position the projector for quick

setup and portability.

2 To adjust projection to the correct position,

press on remote control to access the

settings menu, then navigate to select Proj.

Direc. - Front proj., then press OK.

Front ceiling

1 Mount the projector on the ceiling with

upside up in front of the projection screen.

A projector mount is required to mount the

projector on ceiling.

Other features 11

2 To adjust projection to the correct position,

press on remote control to access the

settings menu, then navigate to select Proj.

Direc. - Rev. front proj., then press OK.

Rear table

1 Place the projector on a table behind the

projection screen. A special rear projection

screen is required.

2 To adjust projection to the correct position,

press on remote control to access the

settings menu, then navigate to select Proj.

Direc. - Rear proj., then press OK.

Rear ceiling

1 Mount the projector on ceiling with upside

up behind the projection screen. To mount

the projector on ceiling behind the screen,

a projector mount and a special rear

projection screen is required.

2 To adjust projection to the correct position,

press on remote control to access the

settings menu, then navigate to select Proj.

Direc. - Rev. rear proj., then press OK.

5

Other features

Listen through external

speakers or headphones

Connect external speakers or headphones to

the projector. With this connection, audio from

the projector is played through the external

speakers or headphones.

DANGER!

Danger of hearing damage!

Before connecting the headphones,

turn down the volume on the projector.

Do not use the projector over a longer

time at high volume – especially when

using headphones. This could lead to

hearing damage.

1 Using a 3.5 mm audio cable, connect the

connector on the projector to the analogue

audio input (3.5 mm jack, or red and white

jacks) on the external speakers.

Or connect the connector on the

projector to your headphones.

• The speakers of the projector are

deactivated automatically when the

external speakers or headphones are

connected to the projector.

HDMI USB DC

When connecting to the headphones, use the

volume control on the remote control (or on the

projector) to adjust the volume to a comfortable

level.

12 Philips · PicoPix Max One

Charge a USB device

You can charge a USB device (e.g. smartphone,

MP3 player or other mobile device).

Charge via USB-A port

1 Using a USB-A cable, connect your USB

device to the USB port on the projector.

2 Turn on the projector. The USB device starts

to charge automatically.

• USB-A connection can also power a

USB device like Amazon Fire TV stick®,

Roku®streaming stick (not for mass storage

or media player).

Charge via USB-C port

1 Using a USB-C cable, connect your USB-C

device to the USB-C port on the projector.

2 Turn on the projector. Make sure USB-C

device charing function is activated. Press

on remote control to access the settings

menu, then navigate to select USB-C

Charger - On.

The USB-C device starts to charge

automatically.

To deactivate charging of a USB-C device,

select USB-C Charger - Off.

Use easy link

This projector supports easy link which uses

the HDMI CEC (Consumer Electronics Control)

protocol. You can use a single remote control

to turn on or off the easy link compliant

devices that are connected through HDMI.

The manufacturer does not guarantee 100%

interoperability with all HDMI CEC devices.

1 Make sure the projector is connected to an

HDMI device which supports HDMI CEC

function (see HDMI connection for image

projection, page 7).

2 To activate easy link function on this

projector, press on remote control to

access the settings menu, then navigate to

select CEC - On.

Change settings 13

6 Change settings

This section helps you change the settings of

the projector.

1 When the projector is turned on, press

or on the remote control (or on the

projector) to access the settings menu.

2 Use the Navigation buttons and OK to

select and change settings.

Language settings

Select your desired language for on-screen

menu.

• Navigate to Language, and press OK, then

press / to select a language.

Input source selection

Navigate to Input Source to access the

following settings.

• Auto: Automatically switch to the correct

input source when an HDMI or USB-C

device is connected.

• HDMI: Select it when an HDMI device is

connected.

• USB-C: Select it when a USB-C device is

connected.

You need to select a correct input source,

so that the projection screen can show

images.

Picture settings

You can access the following picture settings.

• Keystone Correction: Select an option to

correct keystone or distorted images to be

rectangular or square.

• Auto Keystone: Enable or disable

auto correction of the image shape

when tilting the projector upwards or

downwards. When Auto Keystone is

activated, all the other image correction

options will be deactivated.

• Manual Keystone: Manually adjust four

corners of the image.

• Manual Horiz. Keyst.: Manually correct

keystone or distorted images in the

horizontal orientation.

• Keystone Calibration: Perform this

function if the auto keystone correction

does not correct the image shape

ideally.

• Proj. Direc.: Adjust the projection to

the correct position based on different

installation of the projector.

• Digital Zoom: Scale the projection image

within the range from 50% to 100%.

• Picture Preset: Select a predefined color

brightness setting for picture and video

display.

• Picture Adj.: Adjust Brightness/Contrast/

Saturation/Toneburst/Sharpness with the

values from 0 to 100.

14 Philips · PicoPix Max One

• Color Temp.: Set to Warm to enhance hotter

colors such as red; set to Cool to make

picture bluish; set to User to customize

color values in RGB mode.

Power control settings

Go to the following menu options to control

power consumption.

• Sleep Timer: Select a time option which

enables the projector to automatically turn

off at a specified period of time.

• Brightness Mode: Select a screen brightness

mode.

Restore default settings

If the projector does not function normally,

reset the projector to the default settings. It will

delete all the current settings.

• Navigate to Full Reset, and press OK, then

follow on-screen instructions to complete

resetting.

Other settings

You can also access the following options.

• Volume: Adjust volume of the projector.

• CEC: Activate or deactivate easy link

between the devices through HDMI

connection (see Use easy link, page 12).

• USB-C Charger: Enable or disable charging

of the connected USB-C device.

• Position: Re-position the settings menu on

the projection screen when it appears.

• SW Version: Display the current software

version of the projector.

• Soft. Update: Upgrade system software via

a USB device (see Update software, page

15).

Service 15

7 Service

Built-in battery care

The capacity of the built-in battery diminishes

with time. You can prolong the life of the

battery if you observe the following points:

• Without a power supply, the projector

operates on the built-in battery. When the

battery does not have sufficient power, the

projector turns off. In this case connect the

projector to the power supply.

• Charge the battery regularly. Don’t store

the projector with a completely discharged

battery.

• If the projector is not used for several

weeks, discharge the battery a little by

using the projector before storing it.

• Keep the projector and the battery away

from sources of heat.

• If the projector cannot be charged after

connecting to the power supply, use a small

pin to press the reset key (a small hole)

located on the side panel of the projector.

Note about deep discharge of battery

When the built-in battery is in deep discharge,

it may take longer for the actual charging

process to start. In this case, charge the

projector for at least five hours before using it.

DANGER!

Risk of explosion with incorrect type

of batteries!

Do not try to replace the built-in

battery yourself.

Cleaning

DANGER!

Instructions for cleaning!

Use a soft, lint-free cloth. Never use

liquid or easily flammable cleansers

(sprays, abrasives, polishes, alcohol,

etc.). Do not allow any moisture to

reach the interior of the projector.

Do not spray the projector with any

cleaning fluids.

Wipe over the surfaces gently. Be

careful that you do not scratch the

surfaces.

Cleaning the lens

Use a soft brush or lens cleaning paper for

cleaning the lens of the projector.

DANGER!

Do not use any liquid cleaning agents!

Do not use any liquid cleaning

agents for cleaning the lens, to avoid

damaging the coating film on the lens.

Update software

The latest software of the projector can be

found on www.philips.com/support for you

to get the best features and support from the

projector.

Before you update the software of the

projector, check the current software version:

• Press on the remote control to access the

settings menu then navigate to SW Version.

CAUTION!

Do not turn off the projector or remove

the USB flash drive during the update.

Update software through USB

1 Check the latest software version on www.

philips.com/support. Find your product

(model number: PPX520/INT), and locate

‘Software and drivers’.

2 Download the zipped software file and

save it in the root directory of the USB flash

drive.

3 Connect the USB flash drive to the USB

port on the projector.

• Recommend to use an external power

for software update to ensure enough

power supply.

4 Press on the remote control to access

the settings menu and navigate to Soft.

Update, then press OK.

5 Follow the on-screen instructions to

complete the update.

16 Philips · PicoPix Max One

Troubleshooting

Power cycling

If a problem occurs that cannot be corrected

with the instructions in this user manual, follow

the steps given here.

1 Turn the projector off by holding down

for 1 second.

2 Wait at least ten seconds.

3 Turn the projector on again by holding

down for 1 second.

4 If the problem persists, please contact our

technical service centre or your dealer.

Problems Solutions

The projector cannot be turned on or

powered.

• Disconnect and reconnect the power cable, and

try to turn the projector on again.

• Low battery power. Connect the projector to an

external power supply.

• Use the original power adapter.

The projection screen does not show

images.

• You need to connect the projector to an HDMI

device or USB-C device, so that the projection

screen can show images

(see Connect, page 7).

• Select the correct input source. Press on the

remote control to access the input source list for

input source selection.

• Check if the video output of the external device is

turned on.

The projector is charged slowly. • When powered on, the external power will be

used first to run the projector and unused power

will charge the battery.

• For faster charging, charge while the projector is

powered off.

The projector turns itself off. • Low battery power.

• When the projector is running for a long period

of time, the surface becomes hot. Ventilate the

projector properly, with at least 30 cm clearness

around all the sides of the projector.

• Check that the power cable is connected correctly.

The projector cannot be turned off. • Press and hold longer than 30 seconds.

No image from the external HDMI device. • Disconnect the HDMI cable or switch off the

HDMI device.

• Wait three seconds.

• Reconnect the HDMI cable or switch on the HDMI

device again.

No sound from the external connected

device.

• Check the cables to the external device.

• Check that the sound is activated on the external

device.

• Only the original cables from the device

manufacturer may function.

No sound from external HDMI output

device.

• On the HDMI output device, set the audio setting

to Stereo (PCM).

Service 17

Problems Solutions

No sound when you connect your

computer via HDMI cable.

• Check that the sound is activated on the computer

and set to output to the projector.

The projector does not react to remote

control commands.

• Check the batteries of the remote control.

The temperature of the projector’s surface

is warm.

• For this projector it is normal to generate

moderate heat during operation.

What to do if the projector does not work

when connecting to a notebook PC?

• Check that the HDMI cable is plugged in correctly.

• Make sure that the notebook PC has been

switched to projector display.

18 Philips · PicoPix Max One

Package content

PicoPix Max One projector, remote control with

2 AAA batteries, AC adapter, power plugs (UK,

US), travel pouch, Quick Start Guide

8 Appendix

Technical data

Technology/optical

Display technology ..............................................DLP

Light source ................ LED RGB 4 LED Channels

Resolution ....................................1920 x 1080 pixel

Resolution supported ................................. 4K pixel

LED lifetime ...................... last over 30,000 hours

Contrast ratio ................................................. 10,000:1

Aspect ratio ............................................16:9 and 4:3

Throw ratio .............................................................. 1.2:1

Screen size (diagonal)..................................................

............................................. 75cm-305cm / 30”-120”

Screen distance ...............78cm-320cm / 31”-126”

Projection modes ...........front, back, ceiling, back

ceiling

Keystone correction ......................... auto (vertical)

Focus adjustment ........................................ electrical

4-corner correction ................................................ yes

Digital zoom ............................................................. yes

Touch keys ................................................................ yes

Operating system ............................................... Linux

Sound

Internal speaker ......................................................4 W

Connection

HDMI ........................................ x1 with ARC and CEC

USB-C ............................................................. x1 (video)

USB-A 2.0 ................................................x1 (charging)

Analog audio output (3.5mm) .............................. x1

DC jack ............... x1 (power supply and charging)

Power source

Power supply ..................................... power adapter

.............. Input: 100-240V~, 50-60Hz, 1.5 A (max)

...................................Output: DC 20 V, 3.25 A, 65 W

Built-in battery .................................... , mAh

.................................................... last up to 5 hours

Product details

Dimensions (W × D × H) ...........134 x 136 x 47 mm

....................................... 5.28 x 5.35 x 1.85 inches

Weight ..................................................850g / 1.87 lbs

Operating temperature.......................... 5 °C - 35 °C

Storage temperature ...................................... < 60 °C

Appendix 19

• Reorient or relocate the receiving antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet on

a circuit dierent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/

TV technician for help.

FCC ID: 2ASRT-PPX520/INT

Canada regulatory

compliance

This device complies with Industry Canada CAN

ICES-3 (B)/NMB-3(B)

RSS-Gen & RSS-247 statement: This device

complies with Industry Canada RSS standard(s).

Operation is subject to the following two

conditions:

1 This device may not cause interference, and

2 This device must accept any interference,

including interference that may cause

undesired operation of the device.

Other notice

Preservation of the environment as part

of a sustainable development plan is an

essential concern of Screeneo Innovation SA.

The desire of Screeneo Innovation SA is to

operate systems respecting the environment

and consequently it has decided to integrate

environmental performances in the life cycle

of these products, from manufacturing to

commissioning use and elimination.

Packaging: The presence of the logo (green

dot) means that a contribution is paid to an

approved national organisation to improve

package recovery and recycling infrastructures.

Please respect the sorting rules set up locally

for this kind of waste.

Batteries: If your product contains batteries,

they must be disposed of at an appropriate

collection point.

CE statement

• The product shall only be connected to a

USB interface of version USB 2.0 or higher.

• Adapter shall be installed near the

equipment and shall be easily accessible.

• The operating temperature of the EUT can’t

exceed 35°C and shouldn’t be lower than

5°C.

• The plug is considered as disconnect device

of adapter.

The Declaration of Compliance can be

consulted on the site www.philips.com.

FCC statement

15�19 Labeling requirements�

This device complies with part 15 of the FCC

Rules. Operation is subject to the following

two conditions: (1) This device may not cause

harmful interference, and (2) this device must

accept any interference received, including

interference that may cause undesired

operation.

15�21 Information to the user�

Any changes or modications not expressly

approved by the party responsible for

compliance could void the user’s authority to

operate the equipment.

15�105 Information to user�

This equipment has been tested and found

to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in

a residential installation. This equipment

generates, uses and can radiate radio

frequency energy and, if not installed and used

in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference

to radio or television reception, which can be

determined by turning the equipment o and

on, the user is encouraged to try to correct the

interference by one or more of the following

measures:

La pagina sta caricando ...

Philips PPX520 Guida utente

Philips PPX520 Guida utente

in altre lingue

Documenti correlati

Altri documenti