Datalogic CHR-PM80 Quick Reference Manual

Datalogic
Marca
Datalogic
Modello
CHR-PM80
Tipo
Quick Reference Manual
Datalogic ADC, Inc.
959 Terry Street
Eugene, Oregon 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
©2007-2014 Datalogic, Inc.
An Unpublished Work - All rights reserved. No part of the contents of this documentation
or the procedures described therein may be reproduced or transmitted in any form or by
any means without prior written permission of Datalogic ADC, Inc. or its subsidiaries or
affiliates ("Datalogic" or “Datalogic ADC”). Owners of Datalogic products are hereby
granted a non-exclusive, revocable license to reproduce and transmit this documentation
for the purchaser's own internal business purposes. Purchaser shall not remove or alter
any proprietary notices, including copyright notices, contained in this documentation
and shall ensure that all notices appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by
contacting your Datalogic representative. Electronic versions may either be
downloadable from the Datalogic website (www.datalogic.com) or provided on
appropriate media. If you visit our website and would like to make comments or
suggestions about this or other Datalogic publications, please let us know via the
"Contact Datalogic" page.
DISCLAIMER
Datalogic has taken reasonable measures to provide information in this manual that is
complete and accurate, however, Datalogic reserves the right to change any specification
at any time without prior notice. Datalogic and the Datalogic logo are registered
trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. All
other brand and product names may be trademarks of their respective owners.
PATENTS
This product is covered by US Pat. 7,948,214 B2. Additional patents pending.
SERVICE AND SUPPORT
Datalogic provides several services as well as technical support through its website. Log
on to www.datalogic.com
and click on the links indicated for further information
including:
• PRODUCTS
Search through the links to arrive at your product page where you can download
specific Manuals and Software & Utilities including:
- Datalogic Aladdin™, a multi-platform utility program that allows device
configuration using a PC. It provides RS-232 interface configuration as well as
configuration barcode printing.
• SERVICE & SUPPORT
- Technical Support - Product documentation and programming guides and
Technical Support Department in the world
- Service Programs - Warranty Extensions and Maintenance Agreements
- Repair Services - Flat Rate Repairs and Return Material Authorization (RMA)
Repairs.
- Downloads – Manuals & Documentation, Data Sheets, Product Catalogues, etc.
• CONTACT US
Information Request Form and Sales & Service Network
UPDATES AND LANGUAGE AVAILABILITY
UK/US
The latest drivers and documentation updates for this product are available on the
Internet.
Log on to: www.datalogic.com
I
Su Internet sono disponibili le versioni aggiornate di driver e documentazione di questo
prodotto.
Collegarsi a: www.datalogic.com
D
Im Internet finden Sie die aktuellsten Versionen der Treiber und Dokumentation für
dieses Produkt.
Adresse : www.datalogic.com
F
Les versions mises à jour de drivers et documentation de ce produit sont disponibles sur
Internet.
Cliquez sur : www.datalogic.com
E
En Internet están disponibles las versiones actualizadas de los drivers y documentación
de este producto.
Dirección Internet : www.datalogic.com
CHR-PM80
BATTERY CHARGER
QUICK REFERENCE GUIDE
820042914 (Rev. C) February 2014
SYSTEM CONNECTIONS
Apply power to the CHR-PM80 by connecting a power supply unit to the connector
on the rear panel of the battery charger. CHR-PM80 is ready to charge
PowerScan™ M8300 laser readers.
SERIAL CONFIGURATION OPTIONS
In addition to the battery charge function, CHR-PM80 can be connected to a PC by
means of an RS-232/USB interface to send new configuration strings from the PC to
the scanner, to upgrade application software onto the PowerScan™ M8300 reader
or optionally when performing the copy configuration procedure.
To proceed with these operations, connect an RS-232 or USB cable between
CHR-PM80 and the PC. Connect the power supply to CHR-PM80. Insert the
PowerScan™ M8300 reader into the battery charger.
Connections should always be made with power off!
CAUTION
RS-232/USB
Interface
Connector
Power Supply
COMPLIANCE
POWER SUPPLY
This device is intended to be supplied by a UL Listed/CSA Certified Power Unit
marked "Class 2" or LPS power source rated 10-30 V DC, minimum 1 A, which
supplies power directly to the device
.
FCC COMPLIANCE
Modifications or changes to this equipment without the expressed written approval
of Datalogic could void the authority to use the equipment.
This device complies with PART 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference which
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
WEEE COMPLIANCE
For information about the disposal of Waste Electrical and Electronic
Equipment (WEEE), please refer to the website at
www.datalogic.com.
TECHNICAL FEATURES
* Having a switching regulator inside, the CHR-PM80 draws the same power,
regardless of the supply voltage. I.e., as the input voltage increases, the current
drawn decreases.
Electrical Features
Supply voltage
External Power 10..30 VDC
Host Power 5 VDC ±10%
Power consumption
External Power
max. 10 W (charging) *
Host Power max. 500 mA (charging)
Indicators
Ext. Power/Data yellow LED
USB power/data yellow LED
Reader batt. state green/red LED
Spare batt. state green/red LED
beeper
Time of recharge
External Power max. 4 hours with 2150 mAh Li-Ion battery
Host Power max. 10 hours with 2150 mAh Li-Ion battery
Environmental Features
Working Temperature 0° to +40 °C / +32° to +104 °F
Storage Temperature -20° to +70 °C / -4° to +158 °F
Humidity 90% non condensing
Protection Class IP40
Mechanical Features
Weight 204 x 108 x 95 mm / 9.44 x 4.25 x 3.74 in
Cable Length 2 m (6 ft 6 in)
Material ABS
USING CHR-PM80 BATTERY CHARGER
CHR-PM80 is a battery charger for PowerScan™ M8300 laser readers.
The LEDs signal the CHR-PM80 status, as described in the following table:
• This LED refers to the accessory SBS-8000 Spare Battery Slot when
mounted to the CHR-PM80.
LED STATUS
Aux Yellow On = CHR-PM80 is powered through an external power supply.
Yellow Blinking = CHR-PM80 transmission occurs over the Host port.
Host Yellow On = CHR-PM80 is powered by the Host.
Yellow Blinking = CHR-PM80 transmission occurs over the Host port.
Reader Green On = the reader battery is completely charged.
Red On = the reader battery is charging.
Orange Blinking = reader battery fault – replace battery.
Red / Green Alternatively Blinking = charging error – see Ref. Manual
Spare* Green On = the spare battery is completely charged.
Red On = the spare battery is charging.
Orange Blinking = spare battery fault – replace battery.
Red / Green Alternatively Blinking = charging error – see Ref. Manual
Figure 1 – CHR-PM80 Overview Figure 2 – CHR-PM80 LEDs
China RoHS
ㇱઙฬ⒓
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
᦭Ქ᦭ኂ‛凝ᚗర⚛
PART
卋
ᳮ
叏
౐ચ卲
ᄙᄽ侶૖
ᄙᄽԲ૖ㅘ
Printed Circuit Board Assembly
⬉䏃ᵓ㒘ӊ
X O O O O O
Assy, Module
ܝᄺ㒘ӊ
X O O O O O
O
ઍ⴫ᱝẊㇱઙ⊛ᚲ᦭ဋ凝ޗறխࢬܶऱ具Ẋڶ੅ڶ୭ढ凝݁܅Պխ䦀Գا٥ࡉ㧺ॾஒ䣈䢓ຝᚲ咒ؒ⊛
ޝ䶣՗ॾஒ䣈঴խڶ੅ڶ୭ढ凝ऱૻၦ૞ޣρ(SJ/T 11363-2006) 億ࡳऱૻၦޕ
X:ઍ⴫
ᱝẊㇱઙᚲ↪⊛ဋ凝ޗறխ, ⥋ዋ᦭৻㮕᧚ᢱ౔ᚲ฽⊛᦭Ქ᦭ኂ‛凝೏Պխ䦀Գا٥ࡉ㧺ॾஒ䣈䢓ຝᚲ咒ؒ⊛
ޝ䶣՗ॾஒ䣈঴խڶ੅ڶ୭ढ凝ऱૻၦ૞ޣρ(SJ/T 11363-2006) 億ࡳऱૻ㊂
DATALOGIC ADC LIMITED FACTORY WARRANTY
Warranty Coverage
Datalogic warranties this product against defects in workmanship and materials, for a
period of 3 years from the date of shipment, provided that the product is operated under
normal and proper conditions.
Datalogic ADC ("Datalogic") hardware products are warranted against defects in material
and workmanship under normal and proper use. The liability of Datalogic under this war-
ranty is limited to furnishing the labor and parts necessary to remedy any defect covered
by this warranty and restore the product to its normal operating condition. Repair or
replacement of product during the warranty does not extend the original warranty term.
Products are sold on the basis of specifications applicable at the time of manufacture and
Datalogic has no obligation to modify or update products once sold.
If Datalogic determines that a product has defects in material or workmanship, Datalogic
shall, at its sole option repair or replace the product without additional charge for parts
and labor, or credit or refund the defective products duly returned to Datalogic. To per-
form repairs, Datalogic may use new or reconditioned parts, components, subassemblies
or products that have been tested as meeting applicable specifications for equivalent new
material and products. Customer will allow Datalogic to scrap all parts removed from the
repaired product. The warranty period shall extend from the date of shipment from Data-
logic for the duration published by Datalogic for the product at the time of purchase (War-
ranty period). Datalogic warrants repaired hardware devices against defects in
workmanship and materials on the repaired assembly for a 90 day period starting from the
date of shipment of the repaired product from Datalogic or until the expiration of the orig-
inal warranty period, whichever is longer. Datalogic does not guarantee, and it is not
responsible for, the maintenance of, damage to, or loss of configurations, data, and appli-
cations on the repaired units and at its sole discretion can return the units in the "factory
default" configuration or with any software or firmware update available at the time of the
repair (other than the firmware or software installed during the manufacture of the prod-
uct). Customer accepts responsibility to maintain a back up copy of its software and data.
Warranty Claims Process
In order to obtain service under the Factory Warranty, Customer must notify Datalogic of
the claimed defect before the expiration of the applicable Warranty period and obtain
from Datalogic a return authorization number (RMA) for return of the product to a desig-
nated Datalogic service center. If Datalogic determines Customer's claim is valid, Datalogic
will repair or replace product without additional charge for parts and labor. Customer shall
be responsible for packaging and shipping the product to the designated Datalogic ser-
vice center, with shipping charges prepaid. Datalogic shall pay for the return of the prod-
uct to Customer if the shipment is to a location within the country in which the Datalogic
service center is located. Customer shall be responsible for paying all shipping charges,
duties, taxes, and any other charges for products returned to any other locations. Failure
to follow the applicable RMA policy, may result in a processing fee. Customer shall be
responsible for return shipment expenses for products which Datalogic, at its sole discre-
tion, determines are not defective or eligible for warranty repair.
Warranty Exclusions
The Datalogic Factory Warranty shall not apply to:
(i) any product which has been damaged, modified, altered, repaired or upgraded
by other than Datalogic service personnel or its authorized representatives;
(ii) any claimed defect, failure or damage which Datalogic determines was caused
by faulty operations, improper use, abuse, misuse, wear and tear, negligence,
improper storage or use of parts or accessories not approved or supplied by
Datalogic;
(iii) any claimed defect or damage caused by the use of product with any other
instrument, equipment or apparatus;
(iv) any claimed defect or damage caused by the failure to provide proper
maintenance, including but not limited to cleaning the upper window in
accordance with product manual;
(v) any defect or damage caused by natural or man-made disaster such as but not
limited to fire, water damage, floods, other natural disasters, vandalism or
abusive events that would cause internal and external component damage or
destruction of the whole unit, consumable items;
(vi) any damage or malfunctioning caused by non-restoring action as for example
firmware or software upgrades, software or hardware reconfigurations etc.;
(vii) the replacement of upper window/cartridge due to scratching, stains or other
degradation and/or
(viii) any consumable or equivalent (e.g., cables, power supply, batteries, keypads,
touch screen, triggers etc.).
No Assignment
Customer may not assign or otherwise transfer its rights or obligations under this warranty
except to a purchaser or transferee of product. No attempted assignment or transfer in vio-
lation of this provision shall be valid or binding upon Datalogic
DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, ORAL OR WRITTEN, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITA-
TION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PUR-
POSE, OR NONINFRINGEMENT. DATALOGIC SHALL NOT BE LIABLE FOR ANY DAMAGES
SUSTAINED BY CUSTOMER ARISING FROM DELAY
S IN THE REPLACEMENT OR REPAIR OF
PRODUCTS UNDER THE ABOVE. THE REMEDY SET FORTH IN THIS WARRANTY STATEMENT
IS THE CUSTOMER'S SOLE AND EXCLUSIVE REMEDY FOR WARRANTY CLAIMS. UNDER NO
CIRCUMSTANCES WILL DATALOGIC BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR
ANY LOST PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL IN-DIRECT, SPECIAL OR CON-
TINGENT DAMAGES REGARDLESS OF WHETHER DATALOGIC HAD ADVANCE NOTICE OF
THE POSSIBILITY OF SUCH DAMAGES.
Risk of Loss
Customer shall bear risk of loss or damage for product in transit to Datalogic. Datalogic
shall assume risk of loss or damage for product in Datalogic's possession. In the absence of
specific written instructions for the return of product to Customer, Datalogic will select the
carrier, but Datalogic shall not thereby assume any liability in connection with the return
shipment.
DECLARATION OF CONFORMITY
La presente dichiarazione di conformità è rilasciata sotto la responsabilità esclusiva di Datalogic ADC Srl per:
This Declaration of Conformity is issued under the sole responsibility of Datalogic ADC Srl for:
Cette déclaration de conformité est établie sous la seule responsabilité de Datalogic Srl pour:
Diese Konformitätserklärung wird unter der alleinigen Verantwortung des Datalogic ADC Srl erteilt für:
Esta declaración de conformidad se expide bajo la exclusiva responsabilidad de Datalogic ADC Srl para:
CHR-PM80 ; Charger Only Base
sono conformi alle Direttive del Consiglio Europeo sottoelencate:
are in conformity with the requirements of the European Council Directives listed below:
sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:
den nachstehenden angeführten Direktiven des Europäischen Rats:
cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:
2004/108/EC - EMC Directive
2011/65/EU - RoHS Directive
Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla sicurezza dei
prodotti.
On the approximation of the laws of Member States relating to electromagnetic compatibility and product
safety.
Basée sur la législation des Etats membres relative à la compatibilité électromagnétique et à la sécurité des
produits.
Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische Verträglichkeit und
Produktsicherheit entsprechen.
Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad electromagnética y
las Medidas de seguridad relativas al producto.
Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:
This declaration is based upon compliance of the products to the following standards:
Cette déclaration repose sur la conformité des produits aux normes suivantes:
Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:
Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:
Datalogic ADC Srl, Via S. Vitalino, 13
Lippo di Calderara di Reno (BO) 40012 Italy
EC-104
Rev.: 0
Pag.: 1 di 1
e tutti i suoi modelli
and all its models
et tous ses modèles
und seine Modelle
y todos sus modelos
EN 55022 (C
LASS
B ITE ),
S
EPTEMBER
2006:
A
MMENDMENT
A1: O
CTOBER
2007:
L
IMITS
AND
METHODS
OF
MEASUREMENTS
OF
RADIO
DISTURBANCE
CHARACTERISTICS
OF
INFORMATION
TECHNOLOGY
EQUIPMENT
EN 55024, SEPTEMBER 1998:
AMENDMENT A1:2001+A2:2003:
I
NFORMATION
TECHNOLOGY
EQUIPMENT
- I
MMUNITY
C
HARACTERISTICS
L
IMITS
AND
M
ETHODS
OF
M
EA
-
SUREMENT
EN 50581, S
EPTEMBER
2012:
T
ECHNICAL
D
OCUMENTATION
FOR
THE
A
SSESSMENT
OF
E
LECTRICAL
AND
E
LECTRONIC
P
RODUCTS
WITH
R
ESPECT
TO
THE
R
ESTRICTION
OF
H
AZARDOUS
S
UB
-
STANCES
Lippo di Calderara, March29th , 2013
Ruggero Cacioppo
Quality & Reliability Manager - Europe
www.datalogic.com
INSTALLATION
The CHR-PM80 can be mounted for portable or fixed desktop usage, or it can be
fixed to a wall. The horizontal base allows portable and fixed desktop usage, while
the inclined base provides desktop and wall mounting guaranteeing a comfortable
handling of the PowerScan™ M8300 reader.
The cradle package contains the following items:
DESKTOP MOUNTING
Figure 3 - Horizontal Base Front and Bottom View
Figure 4 - Inclined Base Front and Bottom View
Portable Desktop Use
1. Correctly position the CHR-PM80 onto the base by sliding it along the
mounting tabs until aligned.
2. Carefully clean the rubber foot seats of the base to remove any impurities
that could reduce adhesion.
3. Remove the protective plastic from the rubber feet and stick them onto the
bottom surface of the base.
Fixed Desktop Use
For fixed desktop installation, use the adhesive strips or fixing screws (not
provided) according to your needs.
For mounting with adhesive strips:
1. Position the cradle onto the base by sliding it along the mounting tabs until
aligned.
2. Carefully clean the adhesive strip seats of the base to remove any impurities
that could reduce adhesion.
3. Remove the protective plastic from one side of the adhesive strips and stick
them onto the base surface.
4. Position the cables to be connected to the C-8000 cradle along the
dedicated channels.
5. Remove the plastic from the other side of the strips and affix the base to the
table.
CHR-PM80 1 horizontal base
CHR-PM80 Quick Reference Guide 1 inclined base
2 adhesive strips 2 wall-mounting lock hinges
4 rubber feet
Rubber Foot Seat (4)
Cable Channels
Mounting Holes (4)
Mounting Tabs (4)
Mounting Tabs (4)
Mounting Holes (2)
Adhesive Strip Seat (2)
Cable Channels
Rubber
Foot Seat (4)
1
2
1
2
For mounting with screws:
1. Position the cables to be connected to the C-8000 cradle along the
dedicated channels.
2. Position the base on the table and affix it by means of the screws (not
provided).
3. Position the cradle on the base by sliding it along the mounting tabs until
aligned.
WALL MOUNTING
1.
Remove the yellow caps and insert the two wall mounting lock hinges
provided with your cradle.
2. Position the cables to be connected to the C-8000 cradle along the
dedicated channels.
Inclined Base Wall-mounting
6. Attach the cradle onto the base by sliding it along the mounting tabs until
aligned.
If using the adhesive strips:
If using the mounting screws:
3. Carefully clean the adhesive strip
seats of the base to remove any
impurities that could reduce
adhesion.
3. Using the mounting holes on the
base as a pattern, mark the wall
where you desire to mount the
CHR-PM80.
4. Remove the protective plastic
from one side of the adhesive
strips and stick them onto the
base surface.
4. Drill the appropriate size holes and
insert the threaded dowels (not pro-
vided) into the holes.
5. Remove the plastic from the other
side of the strips and affix the
base to the wall as indicated in
the figure below.
5. Position the base on the wall as
indicated in the figure below and
affix it by means of the screws (not
provided).
©2007-2013 Datalogic, Inc. • All rights reserved.
Datalogic and the Datalogic logo are registered trademarks of
Datalogic S.p.A. in many countries, including the U.S.A. and the
E.U.
Adhesive Strip Seat (2)
  • Page 1 1
  • Page 2 2

Datalogic CHR-PM80 Quick Reference Manual

Datalogic
Marca
Datalogic
Modello
CHR-PM80
Tipo
Quick Reference Manual
Scarica il pdf
rapporto

in altre lingue

Documenti correlati