DISCLAIMER AND SAFETY GUIDELINES
2017.10
V1.2
Contents
Safety At a Glance
2
NOTICE
4
Glossary
4
Pre-ight Checklist
4
Disclaimer and Warning
5
Before You Begin
7
Individual Parts
7
Regarding Genuine and Functional Parts 7
Remote Controller 7
Camera 8
Gimbal 8
Compass 8
Propulsion Systems 9
DJI GO 4 App 9
Firmware 10
Product Care
10
Storage and Transportation 10
Maintenance and Upkeep 11
Flight Condition Requirements
11
Weather Conditions and Surrounding Environment 11
Interference with Communications 11
Operating the Aircraft Responsibly 12
Flight Modes, Functions and Warnings
12
Flight Modes 12
Failsafe and Return-to-Home 13
Low Battery 13
Vision System and Infrared Sensing System 14
TapFly 15
ActiveTrack 15
Compliance with Regulations & No Fly Zones
16
Regulations 16
No Fly Zones 16
Compliance Information
17
2
©
2017 DJI All Rights Reserved.
Safety At a Glance
1. Environmental Consideration
• Always y at locations that are clear of building and other obstacles.
• DO NOT y above or near large crowds.
• Avoid ying at altitudes above 400 feet (120 m).*
• Be very careful when ying 19,600 feet (6,000 m) or more above
sea level.
• Fly in moderate weather conditions with temperatures between 32°
to 104° F (0° to 40° C).
• Please take additional caution while ying indoors because the
aircraft stabilization features may be interfered.
• DO NOT y when the wind speeds exceeding 10 m/s or 22 mph.
2. Pre-ight Checklist
• Ensure the remote controller and aircraft batteries are fully charged.
• Ensure the propellers are in good condition and securely tightened before each ight.
• Ensure there is nothing obstructing the motors.
• Only calibrate the compass when the DJI GO™ 4 app or the status indicator prompt you to do so.
• Check that the camera lens is clean and free of stains.
• DO NOT temper (cover or otherwise interfere) with onboard sensors.
• Altering or modifying the aircraft may impact its stability.
3. Operation
• Stay away from the rotating propellers and motors.
• Maintain visual line of sight of your aircraft at all times. .
• DO NOT pull the left stick to the bottom inside corner and press the Return-to-Home (RTH) button at the same time
when the aircraft is airborne unless in an emergency situation.
• DO NOT answer incoming calls, text messages or do anything that may distract you from operating the smart
device to control the aircraft during ight.
• DO NOT y under the inuence of alcohols or drugs.
• During the Return-to-Home procedure, you can adjust the altitude to avoid obstacles.
• DO NOT y closely above reective surfaces such as water or snow, as these terrain may affect the performance
of the Vision Positioning System.
• In the instance of a Low Battery Warning, land the aircraft at a safe location.
• After landing, rst stop the motor, then turn off the Intelligent Flight Battery, and then turn off the remote controller.
• When using TapFly
TM
and ActiveTrack
TM
features, be prepared to take control of the aircraft by pushing the sticks.
However, the aircraft is still in the advanced mode at that time. Press the STOP button on the remote controller or
on the screen to exit the advanced mode completely.
• While with advanced technology, the pilot’s sound discretion is required during the ight. Safety and ight
assistance features such as obstacle avoidance and precise landing are designed to assist your operation, not to
replace it.
• Environmental conditions including lighting and obstacle’s texture may impact the performance of the Vision
System.
• The aircraft is not able to automatically break and stop at a safe distance from an obstacle if the aircraft speed
exceeds 14m/s (31.3 mph).
• The binocular sensor contrary to the ight direction and the infrared modules** are disabled in certain situations.
Please refer to the User Manual for more information.
• Please set the Return to Home ight height higher than surrounding obstacles.
• The RTH feature does not enable the aircraft to automatically return to a moving home point.
The DJI
TM
PHANTOM
TM
4 Series
is NOT a toy and is NOT suitable
for children under the age of 18.
Note that ‘Safety at a Glance’ only provides
a quick overview of the safety tips.
Make sure you read and understand the
remaining sections of the Phantom 4 Series
Disclaimer and Safety Guidelines.
* The ying altitude limit varies in different nations. Always y at the altitudes outlined in your local laws and regulations.
** DJI Phantom 4, Phantom 4 Advanced and Phantom 4 Advanced+ do not have Rear Vision System and Infrared Sensing System. All the
content about Rear Vision System and Infrared Sensing System herein should only be applicable to DJI Phantom 4 Pro, Phantom 4 Pro+.
©
2017 DJI All Rights Reserved.
3
4. Maintenance and Upkeep
• DO NOT use aged, chipped or broken propellers.
• Recommended storage temperature: between 71° and 82° F (22° and 28° C).
• Refer to the
Phantom 4 Series Intelligent Flight Battery Safety Guidelines
for more information about the safe use of
the battery.
5. Observe Local Laws and Regulations
• DO NOT y in the No Fly Zones. You can nd a complete list of these areas at http://ysafe.dji.com/
• The DJI No Fly Zone is not a replacement for local government regulations or good judgment.
• Avoid ying in areas where rescue teams are actively using the airspace.
Fly in Open Areas Strong GPS Signal Maintain Line of Sight Fly Below
400 feet (120 m)
Avoid ying over or near obstacles, crowds, high voltage power lines, trees or bodies of water.
DO NOT y near strong electromagnetic sources such as power lines and base stations as it may affect the onboard compass.
Stay away from the rotating propellers and motors.
No Fly Zone
Learn more at:
http://ysafe.dji.com/no-y
DO NOT use the aircraft in adverse weather conditions such as rain, snow, fog and wind speeds
exceeding 10 m/s or 22 mph.
≥
10m/s
4
©
2017 DJI All Rights Reserved.
NOTICE
All instructions and other collateral documents are subject to change at the sole discretion of SZ DJI TECHNOLOGY
CO., LTD. For up-to-date product information, visit http://www.dji.com and click on the product page.
Glossary
The following terms are used throughout the product literature to indicate various levels of potential harm when
operating this product:
NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage AND a
little or no possibility of injury.
CAUTION: Procedures, which if not properly followed, create the probability of physical property damage
AND a possibility of serious injury.
WARNING: Procedures, which if not properly followed, create the probability of property damage, collateral
damage, and serious injury OR create a high probability of supercial injury.
Read the ENTIRE user manual to become familiar with the features of this
product before operating. Failure to operate the product correctly can result
in damage to the product or personal property and cause serious injury.
This is a sophisticated product. It must be operated with caution and common sense and requires some
basic mechanical ability. Failure to operate this product in a safe and responsible manner could result in
injury or damage to the product or other property. This product is not intended for use by children without
direct adult supervision. DO NOT use with incompatible components or alter this product in any way
outside of the documents provided by SZ DJI TECHNOLOGY CO., LTD. These Safety Guidelines contain
instructions for safety, operation and maintenance. It is essential to read and follow all of the instructions
and warnings in the user manual, prior to assembly, setup or use, in order to operate the product
correctly and avoid damage or serious injury. Before use, you fully understand DJI Phantom 4, Phantom 4
Advanced and Phantom 4 Advanced+ do not have Rear Vision System and Infrared Sensing System. All
the content about Rear Vision System and Infrared Sensing System herein should only be applicable to
DJI Phantom 4 Pro, Phantom 4 Pro+.
AGE RECOMMENDATION: NOT FOR CHILDREN UNDER THE AGE OF 18. THIS IS NOT A TOY.
Pre-ight Checklist
1. Ensure that you are using only genuine parts and that all parts are in mint condition.
2. Ensure the remote controller, Intelligent Flight Battery, and mobile device are fully charged.
3. Ensure that there is no foreign object stuck to the camera lens, the Micro SD card has been inserted into the
camera, and the gimbal can rotate freely before powering it on.
4. Ensure the propellers are securely mounted and tightened onto the motors, and the motors can start and function
normally.
5. Follow the on-screen instructions to calibrate the compass.
6. Ensure the app and aircraft's rmware have been upgraded to the latest version.
7. Ensure that your ight area is outside the No Fly Zones and ight conditions are suitable for ying the aircraft.
8. Be sure that you are NOT ying under the inuence of alcohol, drugs or any substance that may impair your
cognitive abilities.
9. Be familiar with the selected ight mode and understand all safety functions and warnings.
10. Be sure to observe all local regulations, obtain appropriate authorizations, and understand the risks. REMEMBER:
It is solely your responsibility to comply with all ight regulations.
11. Please MAIN
TAIN LINE OF SIGHT (WITH YOUR EYES) OF YOUR AIRCRAFT AT ALL TIMES . Please do not only
rely on rst person view camera to control your aircraft.
12. Ensure the DJI GO 4 app is properly launched to assist your operation of the aircraft. WITHOUT THE FLIGHT
DATA R
ECORDED BY THE DJI GO 4 App, IN CERTAIN SITUATIONS (INCLUDING THE LOSS OF YOUR
AIRCRAFT) DJI MAY NOT BE ABLE TO PROVIDE AFTERSALES SUPPORT TO YOU OR ASSUME LIABILITY.
©
2017 DJI All Rights Reserved.
5
Disclaimer and Warning
This product is NOT a toy and is not suitable for children under the age of 18. Adults should keep the aircraft out of the
reach of children and exercise caution when operating this aircraft in the presence of children.
While the product adopts advanced technology, inappropriate use of the Product could result in personal injury or property
damages. Please read the materials associated with the product before your rst use of the product. These documents are
included in the product package and are also available online on the DJI product page at http://www.dji.com.
This product is a ying camera that offers easy ight when in good working order as set forth below. Visit http://www.
dji.com for the most current instructions and warnings and http://knowbeforeyouy.org/ for more information about ight
safety and compliance.
The information in this document affects your safety and your legal rights and responsibilities. Read this entire document
carefully to ensure proper conguration before use. Failure to read and follow the instructions and warnings in this
document may result in product loss, serious injury to you, or damage to your aircraft.
By using this product, you hereby signify that you have read this disclaimer carefully and that you understand and agree
to abide by the terms and conditions herein. EXCEPT AS EXPRESSLY PROVIDED IN DJI LIMITED WARRANTY (POLICY
AVAILABLE AT (HTTP://WWW.DJI.COM/SERVICE), THE PRODUCT AND ALL MATERIALS, AND CONTENT AVAILABLE
THROUGH THE PRODUCT ARE PROVIDED “AS IS” AND ON AN “AS AVAILABLE” BASIS, WITHOUT WARRANTY
OR CONDITION OF ANY KIND, EITHER EXPRESS OR IMPLIED. DJI DISCLAIMS ALL WARRANTIES OF ANY KIND,
EXCEPT AS EXPRESSLY PROVIDED IN DJI LIMITED WARRANTY, WHETHER EXPRESS OR IMPLIED, RELATING TO
THE PRODUCT, PRODUCT ACCESSORIES, AND ALL MATERIALS, INCLUDING: (A) ANY IMPLIED WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, QUIET ENJOYMENT, OR NON-INFRINGEMENT;
AND (B) ANY WARRANTY ARISING OUT OF COURSE OF DEALING, USAGE, OR TRADE. DJI DOES NOT WARRANT,
EXCEPT AS EXPRESSLY PROVIDED IN DJI LIMITED WARRANTY, THAT THE PRODUCT, PRODUCT ACCESSORIES,
OR ANY PORTION OF THE PRODUCT, OR ANY MATERIALS, WILL BE UNINTERRUPTED, SECURE, OR FREE OF
ERRORS, VIRUSES, OR OTHER HARMFUL COMPONENTS, AND DO NOT WARRANT THAT ANY OF THOSE ISSUES
WILL BE CORRECTED.
NO ADVICE OR INFORMATION, WHETHER ORAL OR WRITTEN, OBTAINED BY YOU FROM THE PRODUCT,
PRODUCT ACCESSORIES, OR ANY MATERIALS WILL CREATE ANY WARRANTY REGARDING DJI OR THE PRODUCT
THAT IS NOT EXPRESSLY STATED IN THESE TERMS. YOU ASSUME ALL RISK FOR ANY DAMAGE THAT MAY
RESULT FROM YOUR USE OF OR ACCESS TO THE PRODUCT, PRODUCT ACCESSORIES, AND ANY MATERIALS.
YOU UNDERSTAND AND AGREE THAT YOU USE THE PRODUCT AT YOUR OWN DISCRETION AND RISK, AND THAT
YOU ARE SOLELY RESPONSIBLE FOR ANY PERSONAL INJURY, DEATH, DAMAGE TO YOUR PROPERTY (INCLUDING
YOUR COMPUTER SYSTEM OR MOBILE DEVICE OR DJI HARDWARE USED IN CONNECTION WITH THE PRODUCT)
OR THIRD PARTY PROPERTY, OR THE LOSS OF DATA THAT RESULTS FROM YOUR USE OF OR INABILITY TO USE
THE PRODUCT.
SOME JURISDICTIONS MAY PROHIBIT A DISCLAIMER OF WARRANTIES AND YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM JURISDICTION TO JURISDICTION.
DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this
product. The user shall observe safe and lawful practices including, but not limited to, those set forth in these Safety
Guidelines.
Data Storage and Usage
When you use our mobile app or our products or other software, data regarding the use and operation of the product,
such as ight telemetry data (e.g., speed, altitude, battery life, and information about the gimbal and camera) and
operations records, may be automatically or manually uploaded to and maintained on a DJI-designated server. The
internal storage device incorporated into the product stores various types of data, including ight telemetry data. You
may also provide ight telemetry data and other data to us when you manually transmit that information from the internal
storage device to us.
6
©
2017 DJI All Rights Reserved.
The information that is automatically uploaded or manually uploaded to us include personal data, such as your user
name, may become associated with, used to identify, or tagged to such uploaded information when we store it. We
separately describe how we use your user name and other personal data on our privacy policy at http://www.dji.com/
policy. By using the product, the mobile app or other software we distribute, or by manually providing data to us, you
consent to the following:
• Our storage of any ight telemetry data and other data uploaded or provided to us, including in combination with your
user name;
• Our use of any such data uploaded or provided (including your user name) in connection providing support and
services to you and to improve our products;
• Our disclosure of such data uploaded or provided (including your user name) to our agents and/or contractors who
may use it on our behalf or in connection with their relationship with us; and
• Our disclosure of such uploaded or provided data (including your user name) as required by law, in a matter of public
safety or policy, as needed in connection with the transfer of our business assets, or if we believe in good faith that
sharing the data is necessary to protect our rights or property.
DJI reserves the right to update this disclaimer and the safety guidelines. Please visit www.dji.com and check your email periodically for the
latest version. This disclaimer is made in various language versions; in the event of divergence among different versions, the English version
shall prevail.
©
2017 DJI All Rights Reserved.
7
Before You Begin
The following documents have been produced to help you safely operate and make full use of your aircraft:
In the Box
Disclaimer and Safety Guidelines
Intelligent Flight Battery Safety Guidelines
Quick Start Guide
User Manual
Check all of the included parts listed in the
In the Box
document and read the
Disclaimer and Safety Guidelines
before
ight. Then prepare for your rst ight by using the
Quick Start Guide
and watching all of the tutorial videos on DJI’s
official website (http://www.dji.com). If you have questions, refer to the
User Manual
in the app or on DJI’s official
website for more comprehensive information. Make sure you fully understand the functionality of each individual part,
the ight condition requirements, the key contingency warning functions/systems, and all government regulations before
each ight. If you have any questions or problems during the assembly, maintenance or use of this product, please
contact DJI or a DJI authorized dealer.
Individual Parts
Regarding Genuine and Functional Parts
To avoid component malfunction, serious injury, and property damage, observe the following rules:
1. Use only genuine DJI parts or parts certified by DJI. Unauthorized parts or parts from non-DJI certified
manufacturers may cause system malfunctions and compromise safety.
2. Ensure there are no foreign objects (such as water, oil, soil, sand, etc.) inside of the aircraft or its components.
3. Ensure the aircraft and its components – including but not limited to the remote controller, camera, gimbal,
compass, propulsion system, and battery – are all in good working order, damage-free, and functioning well.
Refer to the remaining sections in this document for more details on how to ensure the functionality of these
components.
4. DO NOT modify or alter the aircraft, its components, and parts. Unauthorized modification may cause
malfunctions and affect the aircraft’s functionality and safety.
Remote Controller
1. Ensure the remote controller is fully charged before each ight.
2. If the remote controller is powered on and has NOT been used for 5 minutes, it will sound an alert. After 6 minutes
it will automatically power off. Move the sticks or perform some other action to cancel the alert.
3. Adjust the clamp of the mobile device holder to allow a rm grip on your mobile device.
4. Ensure the mobile device holder is rmly in place and does not slip.
5. Ensure the antennas of the remote controller are unfolded and adjusted to the proper position to achieve optimal
transmission quality.
6. Repair or replace the remote controller if damaged. A damaged remote controller antenna will greatly decrease
performance.
7. Linking is required if you wish to replace your remote controller or receiver or add a new remote controller. Refer
to the User Manual for details.
8. Make Sure that you rst switch off the aircraft (after it is safe to do so), then switch off the Remote Controller.
Otherwise it may cause the lost of control of the aircraft.
9. Fully charge the battery at least once every three months to maintain battery health.
8
©
2017 DJI All Rights Reserved.
Camera
To avoid possible serious injury and property damage, observe the following rule:
1. DO NOT block any ventilation holes on the camera as the heat generated may hurt you and damage the device.
1. Check camera settings before use to make sure you can adjust them to t your needs.
2. Test the camera by shooting a few test images and check that it is operating correctly before shooting important
pictures or videos.
3. DO NOT remove the Micro SD card from the camera when it is powered on.
4. Photos or videos cannot be transmitted or copied from the camera if the Intelligent Flight Battery is powered off.
5. Be sure to power off the Intelligent Flight Battery correctly, otherwise your camera parameters will NOT be saved
and any recorded videos may be damaged. NOTE: Regardless of the reason, DJI will not be responsible for any
failure of an image or video to be recorded or having been recorded in a way that is not machine readable.
Gimbal
1. Precision elements in the gimbal may be damaged in a collision or impact, which may cause the gimbal to function
abnormally.
2. DO NOT apply external force to the gimbal after the gimbal is powered on.
3. DO NOT add any payloads to the gimbal, as this may cause the gimbal to function abnormally or even lead to
motor damage.
4. Remove the gimbal clamp before powering on the gimbal. Re-install the gimbal clamp to secure the gimbal’s
position if you are going to store the aircraft for an extended period.
Compass
To avoid possible serious injury and property damage, observe the following rule:
1. Land immediately when obvious drifting occurs in ight, i.e., the aircraft does NOT y in straight lines.
Only calibrate the compass when the DJI GO 4 app or the status indicator prompt you to do so. Observe the following
rules when calibrating your compass:
1. DO NOT calibrate your compass where there is a chance of strong magnetic interference, such as magnetite,
parking structures, and steel reinforcements underground.
2. DO NOT carry ferromagnetic materials with you during calibration such as cellular phones.
3. The DJI GO 4 app will prompt you to resolve the compass issue if the compass is affected by strong interference
after calibration is complete. Follow the prompted instructions to resolve the compass issue.
©
2017 DJI All Rights Reserved.
9
Propulsion Systems
To avoid serious injury to yourself or others, which may be caused by the rotating propellers and
motors, observe the following rules:
Propellers
1. DO NOT use aged, chipped, or broken propellers.
2. Always power off the aircraft before touching the propellers.
3. Be aware of the sharp edges of the propellers when mounting or removing the propellers. Wear gloves or take
other protective measures when touching the propellers.
4. Whenever necessary, use tools (e.g., wrench, screwdriver, pliers, etc.) to remove or install the propellers.
5. Ensure the propellers are securely mounted and tightened to prevent them from falling off the motors.
6. DO NOT turn on the motors when propellers are mounted and there are other people or animals in the
immediate vicinity.
7. Using third-party propellers may compromise the aerodynamics of the aircraft. For a better and safer ight
experience, we recommend you to use original DJI propellers only.
Motors
1. Ensure the motors are securely mounted and rotating smoothly.
2. DO NOT attempt to modify the structure of the motors.
3. DO NOT touch or let your hands or body come in contact with the motors after ight as they may be hot.
To avoid possible serious injury and property damage, observe the following rules
:
1. DO NOT block any of the ventilation holes on the motors.
2. DO NOT block any of the ventilation holes on the body of the aircraft.
Motors
1. Keep the motors free of dust.
2. If a motor is stuck and unable to rotate freely, execute the CSC (Combination Stick Command) to stop the motors
immediately.
Electronic Speed Controllers
1. Ensure the ESCs sound normal when powered on.
DJI GO 4 App
1. Be sure to fully charge your tablet or mobile device before launching the app (DJI GO 4 App). A tablet is
recommended for a better user experience.
2. Mobile cellular data is required when use DJI GO 4 app. Please contact your local operator for data charges.
3. If you are using a phone as your mobile display device, be sure to continue ying safely when the phone receives
an incoming call. DO NOT accept phone calls or use the texting features during ight.
4. Read all prompted safety tips, warning messages, and disclaimers carefully. Be familiar with the related
regulations in your area. You are solely responsible for being aware of all relevant regulations and ying in a way
that is compliant.
a. Read and understand the warning messages before using the Auto-take off and Auto-landing features.
b. Read and understand the warning message and disclaimer before setting the altitude beyond the default limit.
c. Read and understand the warning messages and disclaimer before switching between ight modes.
10
©
2017 DJI All Rights Reserved.
5. Land your aircraft immediately if there is an alert shown on the app.
6. Examine and check all warning messages on the checklist displayed in the app prior to each ight.
7. Use the in-app simulator to practice your ight skills if you have never operated the aircraft or if you do not have
sufcient experience to be comfortable operating the aircraft.
8. Beginner Mode is enabled by default when you launch the app for the rst time. The aircraft’s altitude and ight
distance is restricted when ying in Beginner Mode. We recommend you y in Beginner Mode to perfect your ight
skills. Operate the actual aircraft only after you are condent that you have mastered adequate ight skills.
9. Cache the map data of the area where you intend to y the aircraft by connecting to the Internet before each ight.
10. The ap
p is designed to assist your operation. Please use your sound discretion and DO NOT rely on the
app to control your aircr
aft.
11. Your u
se of the app is subject to the DJI GO 4 app Terms of Use and DJI Privacy Policy. Please read
them carefully in the app.
Firmware
To avoid serious injury to children and animals, observe the following rule:
1.
Keep children and animals at a safe distance during any rmware upgrade, system calibration, and
parameter setting procedures.
1. For safety, always update the rmware to the latest version when an upgrade notication is shown in the app.
2. Firmware upgrade notications will prompt you to proceed with an update immediately or to update the rmware
within three days. If you choose to ignore the current rmware update, you are required to accept the prompted
disclaimer. You further understand and agree that the data including but not limited to user selection records may
be uploaded to and maintained on a DJI-designated server.
3. Be sure to download the rmware package le from the ofcial DJI website. Verify the rmware package le’s
integrity before upgrading.
4. Be sure to update the remote controller’s rmware to the latest version after you update the aircraft’s rmware.
5. The remote controller may become unlinked from the aircraft after updating. Re-link the remote controller and
aircraft.
6. Be sure to check all connections and remove the propellers from the motors before performing the firmware
update.
Product Care
Storage and Transportation
To avoid serious injury to children and animals, observe the following rule:
1. Small parts, such as cables and straps, are dangerous if swallowed. Keep all parts out of reach of children
and animals.
1. Store the Intelligent Flight Battery and remote controller in a cool, dry place away from direct sunlight to ensure the
built-in LiPo battery does NOT overheat. Recommended storage temperature: between 71° and 82° F (22° and 28°
C) for storage periods of more than three months. Never store in environments outside the temperature range of
32° to 113° F (0° to 45° C).
2. DO NOT allow the camera to come into contact with, or become immersed in, water or other liquids. If it gets
©
2017 DJI All Rights Reserved.
11
wet, wipe dry with a soft, absorbent cloth. Turning on an aircraft that has fallen into water may cause permanent
component damage. DO NOT use substances containing alcohol, benzene, thinners or other flammable
substances to clean or maintain the camera. DO NOT store the camera in humid or dusty areas.
3. DO NOT connect this product to any USB interface that is older than version 2.0. DO NOT connect this product to
any "power USB" or similar devices.
Maintenance and Upkeep
1. Check every part of the aircraft after any crash or violent impact. If you have any problems or questions, please
contact a DJI authorized dealer.
2. Please refer to the Phantom 4 series Intelligent Flight Battery Safety Guidelines for more information on battery
maintenance and upkeep.
Flight Condition Requirements
Weather Conditions and Surrounding Environment
The aircraft is designed to operate in good to moderate weather conditions. To avoid collision, serious injury
and property damage, observe the following rules:
1. DO NOT use the aircraft in severe weather conditions. These include wind speeds exceeding 10 m/s (22.4
mph) , snow, rain, smog, heavy wind, hail, lightning, tornadoes or hurricanes.
2. Keep the aircraft at least 10 meters (30 feet) away from obstacles, people, animals, buildings, public
infrastructure, trees, and bodies of water when in ight. As the aircraft’s altitude increases, keep an even
further distance away from the aforementioned objects or obstacles.
3. Be EXTRA cautious when operating the aircraft indoors. Some features of the aircraft, especially the
stabilization feature, may be impacted.
1. Aircraft and battery performance is subject to environmental factors such as air density and temperature.
a. Be very careful when flying 20,000 feet (6,000 meters) or more above sea level as battery and aircraft
performance may be reduced.
2. DO NOT use the aircraft near accidents, re, explosions, oods, tsunamis, avalanches, landslides, earthquakes,
dust, or sandstorms.
Interference with Communications
1. Fly in open areas. Tall buildings, steel structures, mountains, rocks or even trees may affect the accuracy of the
on-board compass and block the GPS signal.
2. Avoid interference from other wireless equipment, because it may affect the remote controller. Make sure to turn
off the Wi-Fi on your mobile device.
3. DO NOT y near areas with magnetic or radio interference. These include but are NOT limited to: high voltage
lines, large scale power transmission stations or mobile base stations and broadcasting towers. Failing to do so
may compromise the transmission quality of this product or cause remote controller and video transmission errors
which may affect ight orientation and location accuracy. The aircraft may behave abnormally or go out of control
in areas with too much interference.
12
©
2017 DJI All Rights Reserved.
Operating the Aircraft Responsibly
To avoid serious injury and property damage, observe the following rules:
1. Make sure you are NOT drunk, taking drugs, under the inuence of anesthesia, or suffering from dizziness,
fatigue, nausea or any other conditions, whether physical or mental, that could impair your ability to operate
the aircraft safely.
2. Pulling the left stick to the bottom inside corners and pressing the RTH button at the same time will stop
the motor when the aircraft is airborne. The landing function of the aircraft will not be triggered. DO NOT
perform the aforementioned combination command unless in an emergency situation. You may turn off this
combination command feature via the DJI GO 4 App.
3. Upon landing, power off the aircraft rst, then switch off the remote controller.
4. DO NOT drop, launch, re or otherwise project any dangerous payloads on or at any buildings, persons or
animals, or which could cause personal injury or property damage.
5. DO NOT use the aircraft that has been crashed or accidently hit, or the aircraft that is not in good condition.
1. Make sure you have been sufciently trained and have contingency plans for emergency situations or for when
accidents occur.
2. Make sure you have a ight plan and never y the aircraft recklessly.
3. Respect the privacy of others when using the camera. Make sure you comply with local privacy laws, regulations,
and moral standards.
4. DO NOT use this product for any reason other than general personal use. DO NOT use it for any illegal or
inappropriate purpose (such as spying, military operations, or unauthorized investigations).
5. DO NOT use this product to defame, abuse, harass, stalk, threaten or otherwise violate the legal rights (such as
the right of privacy and publicity) of others.
6. DO NOT trespass onto private property of others.
Flight Modes, Functions and Warnings
Flight Modes
To avoid serious injury and property damage, observe the following rule:
DO NOT switch from P-mode to either A-mode or S-mode unless you are sufciently familiar with the aircraft’s
behavior for each ight mode, since disabling GPS may result in being unable to land the aircraft safely.
The aircraft will enter A-mode in the following two instances:
1. Passive: When there is weak GPS signal or when the compass experiences interference where the Vision
System is unavailable.
2. Active: Users toggle the ight mode switch to A-mode.
In A-mode, the Vision System and some advanced features are disabled. Therefore, the aircraft cannot
position or auto-brake in this mode and is easily affected by its surroundings, which may result in
horizontal shifting. Use the remote controller to position the aircraft.
Maneuvering the aircraft in A-mode can be difcult. Before switching the aircraft into A-mode, make sure
you are comfortable ying in this mode. DO NOT y the aircraft too far away as you might lose control and
cause a potential hazard.
Avoid ying in areas where GPS signal is weak, or in conned spaces. The aircraft will otherwise be forced
to enter A-mode, leading to potential ight hazards, please land it in a safe place as soon as possible.
©
2017 DJI All Rights Reserved.
13
P-mode or S-mode is preferred for most flight scenarios. Users can switch to A-mode if P-mode or S-mode is
unavailable. When ying in A-mode, take EXTRA precautions because some features are NOT available in A-mode.
1. P-mode (Positioning): P-mode works best when the GPS signal is strong. The aircraft utilizes the GPS and Vision
System to automatically stabilize itself, navigate between obstacles or track a moving object. Advanced features
such as TapFly and ActiveTrack are enabled in this mode.
2. S-mode (Sports): S-mode is identical to P-mode in terms of ight controller settings, except that the handling gain
values of the aircraft are adjusted in order to enhance the maneuverability of the aircraft. The maximum ight
speed of the aircraft is increased in this mode.
3. A-mode (Attitude): When neither the GPS nor the Vision System is available, the aircraft will only use its barometer
for positioning to control the altitude.
If you intend to switch to modes that disable GPS assistance (e.g., Atti mode), you are required to accept the
prompted disclaimer to enable this function. If this function is enabled, you further understand and agree that data
including but not limited to function records could be uploaded to and maintained on a DJI designated server.
Failsafe and Return-to-Home
1. The Return-to-Home feature will NOT work if the GPS signal is insufcient or if GPS is not active.
2. Press the RTH (Return-to-Home) Button on the remote controller to bring the aircraft back to the Home Point. DO
NOT resort to turning off the remote controller to force the aircraft to return to Home Point.
3. Tall buildings may adversely affect the Failsafe function. Please adjust the aircraft location, altitude and speed
while returning home to avoid obstacles.
4. Make sure to always y the aircraft within the transmission range of the remote controller.
5. Only use the Failsafe and Return-to-Home functions in emergency cases, as they may be affected by the weather,
the environment, or any nearby magnetic elds.
6. The aircraft cannot avoid obstacles during the Failsafe RTH when lighting condition is not ideal, or if the Visual
System is otherwise disabled. Therefore, it is important to set an appropriate Failsafe altitude before each ight.
7. When ying indoors, the aircraft cannot perform precision hovering when ying above certain surfaces . Refer to the
“Vision System and Infrared Sensing System” section for complete indoor ying criteria.
8. During the Failsafe RTH, the pilot may regain control of the aircraft if the remote controller signal is re-established.
Moving the left stick when the aircraft reaches 20 meters (65 feet) altitudes or beyond will cancel the ascending
process and command the aircraft to return to the home point immediately. Pressing the RTH button once during
the Failsafe RTH will cancel the RTH process immediately.
9. If the battery life so allows, the aircraft may rst return to the last position where it had connection with the remote
controller during the Failsafe RTH. As a result, you may observe the aircraft first flying away from you, then
returning to the home point.
Low Battery
1. When the Critical Battery Level Warning activates and the aircraft is descending automatically, you may push the
throttle up to maintain the aircraft's altitude and navigate it to a more appropriate location for landing.
2. When battery warnings are triggered, promptly bring the aircraft back to the Home Point or land to avoid losing
power during ight and causing damage to the aircraft, property, animals, and people.
14
©
2017 DJI All Rights Reserved.
Vision System and Infrared Sensing System*
1. The Vision System cannot work properly over surfaces that do NOT have clear pattern variations. The Vision
System is only effective when the aircraft is at altitudes of 0.3 to 10 meters.
2. The Vision System may NOT function properly when the aircraft is ying over water or snow-covered areas.
3. Keep your pets away from the aircraft when the Vision System is activated, as the sonar sensors emit a high
frequency sound that is only audible to some pets.
4. Note that the Vision System may NOT function properly when the aircraft is ying too fast or too low.
5. Operate the aircraft cautiously when in any of the following situations:
a. Flying over monochrome surfaces (e.g., pure black, pure white, pure red, pure green).
b. Flying over highly reective surfaces;
c. Flying at high speeds (over 10m/s (32.8 feet/s) at 2 meters (6.6 feet) or over 5m/s (16.4 feet) at 1 meter (3.3 feet);
d. Flying over water or transparent surfaces;
e. Flying over moving surfaces or objects;
f. Flying in an area where the lighting changes frequently or drastically;
g. Flying over extremely dark (< 10 lux) or bright (> 10,000 lux) surfaces;
h. Flying over surfaces that can absorb sound waves (e.g., thick carpet).
i. Flying over surfaces without clear patterns or texture;
j. Flying over surfaces with identical repeating patterns or textures (e.g. tiles with same design);
k. Flying over inclined surfaces that will deect sound waves away from the aircraft.
l. Flying over obstacles with too small effective infrared reective surface.
6. Camera calibration is required if the aircraft suffers from crashing. Calibrate the front cameras if the DJI GO 4 app
prompts you to do so.
7. Keep the sensors clean and at all times. DO NOT temper with the sensors.
8. The Vision System may not be able to recognize pattern on the ground in low light conditions (less than 100 lux).
9. Do not use other ultrasonic devices with frequency of 40 KHz when Vision System is in operation.
10. Infrared Sensing System is enabled only in the Beginner mode and Tripod Mode.
11. Binocular sensor contrary to the ight direction is enabled only in the P-mode, Tapy, and ActiveTrack mode
when the aircraft speed is less than 6m/s (13.4 mph).
12. The Vision System and Infrared Sensing System are not able to brake and stop the aircraft at a safe distance from
an obstacle if the aircraft speed exceeds 14m/s (31.3 mph).
13. Please be mindful of blind spots of the Vision System and Infrared Sensing System. The blind spots of Phantom 4
series differ, please refer the illustrations below (Grey for blind spots)
0.7m
7m
6.8m
7m
6.8m
0.7m
13.1cm
0.7m
12.8cm
Phantom 4 Phantom 4 Pro / Phantom 4 Pro+
* Rear Vision System and Infrared Sensing System are not applicable to Phantom 4, Phantom 4 Advanced and Phantom 4 Advanced+.
©
2017 DJI All Rights Reserved.
15
TapFly
To prevent serious injury or property damage, observe the following guidelines:
1. DO NOT instruct the aircraft to y towards people, animals, small and ne objects (e.g. tree branches and power
lines) or transparent objects (e.g. glass and water).
2. Watch out for potential obstacles in your surrounding area (especially on the rear, left, and right sides of the
aircraft) and stay clear of them to avoid accidents.
3. Be prepared to take control of the aircraft by pushing the sticks on the remote controller, or press the STOP button
on the remote controller or on the screen to exit TapFly in case of an emergency.
1. There may be deviations between the expected and actual paths for your TapFly selection.
2. The selectable range on the screen is limited. You cannot make TapFly selections near the upper or lower edges
of the screen.
3. The TapFly mode may NOT function properly when the aircraft is ying over water or snow covered area.
4. Be extra cautious when ying in extremely dark (< 300 lux) or bright (> 10,000 lux) environments.
ActiveTrack
To prevent serious injury and property damage, observe the following guidelines:
1. Ensure there are no people, animals, small and ne objects (e.g. tree branches and power lines) or transparent
objects (e.g. glass and water) along the desired tracking path.
2. Watch out for potential obstacles in your surrounding area (especially on the rear, left, and right sides of the
aircraft) and stay clear of them to avoid accidents.
3. Be prepared to take control of the aircraft by pushing the sticks on the remote controller, or press the STOP button
on the remote controller or on the screen to exit ActiveTrack in case of an emergency.
4. Ensure there are no obstacles behind the aircraft when it performs ActiveTrack in the reverse direction.
1. Be extra cautious when using ActiveTrack in any of the following situations:
a. The movement of the tracked subject is not on a level plane;
0.7m
13.1cm
Phantom 4 Advanced / Phantom 4 Advanced+ Phantom 4 Series
16
©
2017 DJI All Rights Reserved.
b. The tracked subject changes shape drastically while moving;
c. The tracked subject could be blocked or out of sight for a long time;
d. When the tracked object is in a snow-covered area;
e. The lighting is extremely low (< 300 lux) or high (> 10,000 lux); and
f . The tracked subject has a similar color or pattern as the surrounding environment.
2. You must follow local privacy laws and regulations when using ActiveTrack.
Compliance with Regulations & No Fly Zones
Regulations
To avoid non-compliant behavior, serious injury and property damage, observe the following rules:
1. DO NOT operate in the vicinity of manned aircraft, regardless of altitude. (Land immediately if necessary)
2. DO NOT y the aircraft in densely populated areas, including cities, sporting events, exhibitions, performances, etc.
3. DO NOT y the aircraft above the authorized altitude. Remain well clear of and DO NOT interfere with manned
aircraft operations. Be aware of and avoid other aircraft and obstacles at all times.
To avoid non-compliant behavior, serious injury and property damage, observe the following rules:
1. DO NOT fly the aircraft near or inside no fly zones specified by local laws and regulations. The no fly zone
list includes: airports, borders between two sovereign countries or regions, major cities/regions, etc., and is
continuously updated. DO NOT fly around sensitive infrastructure or property such as power stations, water
treatment facilities, correctional facilities, heavily traveled roadways, government facilities, military zones, etc.
2. DO NOT y the aircraft above the authorized altitude
3. ALWAYS keep your aircraft within visual line of sight (VLOS), and use an observer to assist if needed.
4. NEVER use the aircraft to carry illegal or dangerous goods/payloads.
1. Make sure you understand the nature/type of your ight operation (such as for recreation, for public use, or for commercial use) and
have obtained corresponding approval and clearance from the related government agencies before ight. Consult with your
local regulators for comprehensive denitions and specic requirements. For users operating their aircraft in the United
States, please rst visit http://www.knowbeforeyouy.org/ and take the most appropriate action that suits your
circumstances.
2. Please note that remote controlled aircraft may be banned from conducting commercial activities in certain
countries and regions. Check and follow all local laws and ordinances before ying as those rules may differ from
those stated here.
3. Respect the privacy of others when using the camera. DO NOT conduct surveillance operations such as
image capture or video recording on any person, entity, event, performance, exhibition, and property without
authorization or where there is an expectation of privacy, even if the image or video is captured for personal use.
4. Please be advised that in certain areas, the recording of images and videos from events, performances,
exhibitions, or commercial properties by means of a camera may contravene copyright or other legal rights, even
if the image or video was shot for personal use.
No Fly Zones
DJI always stresses safety during ight, and has therefore developed various aids to help users comply with local
rules and regulations while ying. We strongly recommend that you update the rmware to the latest version to ensure
the following features are fully updated:
©
2017 DJI All Rights Reserved.
17
No Fly Zones
1. No Fly Zones include but are not limited to major airports around world, borders between two sovereign countries
or regions, major cities/regions, etc.
2. The complete list of No Fly Zones is listed on the ofcial DJI website at http://ysafe.dji.com/no-y and is subject to
periodic updates in line with the latest regulatory requirements without prior notice.
3. Some No Fly Zones are comprised of several zones. Each zone features circles of various sizes. The aircraft will
NOT be able to take off in the inner most zone of the No Fly Zone, and will descend to the specied altitude when
it approaches the edge of the inner most zone. Ground station functionality is disabled when the aircraft is within a
No Fly Zone.
4. Users are NOT able to set up waypoints within No Fly Zones.
Altitude Limit
1. Fly NO higher than 120 meters (400 feet) above ground level and stay away from any surrounding obstacles.
2. If you intend to y above the default altitude limit, you are required to accept the prompted disclaimer to enable the
new altitude limit. If a new altitude limit is set, you further understand and agree that data including but not limited to
ight telemetry data and altitude limit changes could be uploaded to and maintained on a DJI-designated server.
Compliance Information
FCC Compliance Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) This device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid
the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less
than 20cm during normal operation.
IC RSS Warning
This device complies with Industry Canada licence-exempt RSS standard (s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
IC Radiation Exposure Statement:
This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter
18
©
2017 DJI All Rights Reserved.
must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
Any Changes or modications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
KCC Warning Message
“해당무선설비는 운용 중 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니다 .”
“해당 무선설비는 운용 중 전파혼신 가능성이 있음”
NCC Warning Message
低功率電波輻射性電機管理辦法
第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原
設計之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應改善至無干擾時方得繼續
使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻
射性電機設備之干擾。
EU Compliance Statement:
SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device is in compliance with
the essential requirements and other relevant provisions of the Directive 2014/53/EU.
A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance
EU contact address: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
Declaración de cumplimiento UE:
SZ DJI TECHNOLOGY CO., LTD. por la presente declara que este dispositivo
cumple los requisitos básicos y el resto de provisiones relevantes de la Directiva 2014/53/EU.
Hay disponible online una copia de la Declaración de conformidad UE en www.dji.com/euro-compliance
Dirección de contacto de la UE: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
EU-verklaring van overeenstemming:
SZ DJI TECHNOLOGY CO., LTD. verklaart hierbij dat dit apparaat voldoet aan
de essentiële vereisten en andere relevante bepalingen van Richtlijn 2014/53/EU.
De EU-verklaring van overeenstemming is online beschikbaar op www.dji.com/euro-compliance
Contactadres EU: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
Declaração de conformidade da UE:
A SZ DJI TECHNOLOGY CO., LTD. declara, através deste documento, que este
dispositivo está em conformidade com os requisitos essenciais e outras disposições relevantes da Diretiva 2014/53/EU.
Existe uma cópia da Declaração de conformidade da UE disponível online em www.dji.com/euro-compliance
Endereço de contacto na UE: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
Dichiarazione di conformità UE:
SZ DJI TECHNOLOGY CO., LTD. dichiara che il presente dispositivo è conforme ai
requisiti essenziali e alle altre disposizioni rilevanti della direttiva 2014/53/EU.
Una copia della dichiarazione di conformità UE è disponibile online all'indirizzo Web www.dji.com/euro-compliance
Indirizzo di contatto UE: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
Déclaration de conformité UE:
Par la présente, SZ DJI TECHNOLOGY CO., LTD déclare que cet appareil est
conforme aux principales exigences et autres clauses pertinentes de la directive européenne 2014/53/EU.
Une copie de la déclaration de conformité UE est disponible sur le site www.dji.com/euro-compliance
Adresse de contact pour l'UE : DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
EU-Compliance:
Hiermit erklärt SZ DJI TECHNOLOGY CO., LTD., dass dieses Gerät den wesentlichen Anforderungen
und anderen einschlägigen Bestimmungen der EU-Richtlinie 2014/53/EU entspricht.
Eine Kopie der EU-Konformitätserklärung nden Sie online auf www.dji.com/euro-compliance.
Kontaktadresse innerhalb der EU: DJI GmbH, Industriestrasse. 12, 97618, Niederlauer, Germany
©
2017 DJI All Rights Reserved.
19
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of
separately. The disposal at the communal collecting point via private persons is for free. The owner of old
appliances is responsible to bring the appliances to these collecting points or to similar collection points. With
this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.
Thailand Warning message
เครื่องโทรคมนาคมและอุปกรณ์นี้ มีความสอดคล้องตามข้อกำาหนดของ กทช.
Mexico Warning message
“La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo
no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la
que pueda causar su operación no deseada.”
Brazil Warning message
Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial,
mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário
La pagina si sta caricando...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
dji Phantom 4 Pro Guida utente
- Tipo
- Guida utente
- Questo manuale è adatto anche per
in altre lingue
- English: dji Phantom 4 Pro User guide