Eizo FDS1721T Manuale utente

Important

Please read this “User’s Manual”, and “PRECAUTIONS” (separate

volume) carefully to familiarize yourself with safe and effective usage.

• Refer to the “Setup Guide” for information on the installation /

connection of the monitor.

• For the latest product information including the “User’s Manual”,

refer to our web site :

www.eizoglobal.com

Touch Panel Color LCD Monitor

User’s Manual

2

Location of Caution Statement

This product has been adjusted specically for use in the region to which it was originally shipped. If

operated outside this region, the product may not perform as stated in the specications.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by

any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.

EIZO Corporation is under no obligation to hold any submitted material or information condential unless

prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every

effort has been made to ensure that this manual provides up-to-date information, please note that EIZO

monitor specications are subject to change without notice.

3

Notice for this monitor

This product is suited to general purposes like creating documents, viewing multimedia content.

This product has been adjusted specically for use in the region to which it was originally shipped. If the

product is used outside the region, it may not operate as specied in the specications.

This product may not be covered by warranty for uses other than those described in this manual.

The specications noted in this manual are only applicable when the following are used:

• Power cords provided with the product

• Signal cables specied by us

Only use optional products manufactured or specied by us with this product.

If you place this product on a lacquer-coated desk, the color may adhere to the bottom of the stand due to

the composition of the rubber. Check the desk surface before use.

It takes about 30 minutes (under our measurement conditions) for the monitor display to stabilize. Please

wait 30 minutes or more after the monitor power has been turned on, and then adjust the monitor.

Monitors should be set to a lower brightness to prevent a loss in the screen quality caused by long-term use

and to maintain stable use.

When the screen image is changed after displaying the same image for extended periods of time, an

afterimage may appear. Use the screen saver or power save function to avoid displaying the same image for

extended periods of time. Depending on the image, an afterimage may appear even if it was displayed for

a short period of time. To remove such a phenomenon, change the image or keep the power turned off for

several hours.

If the monitor displays continuously over a long period of time, dark smudges or burn-in may appear. To

maximize the life of the monitor, we recommend the monitor be turned off periodically.

Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer

to “Cleaning” (page 4)).

The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels may

appear on the LCD panel, this is not a malfunction. Percentage of effective dots: 99.9994 % or higher.

The backlight of the LCD panel has a xed lifetime. Depending on the usage pattern, such as usage for

long continuous periods, the lifespan of the backlight may run out sooner, requiring replacement. When the

screen becomes dark or begins to icker, please contact your local EIZO representative.

Do not scratch or press on the LCD panel with any sharp objects, at this may result in damage to the LCD

panel. Do not attempt to brush with tissues as this may scratch the panel.

When the monitor is cold and brought into a room or the room temperature goes up quickly, dew

condensation may occur on the interior and exterior surfaces of the monitor. In that case, do not turn the

monitor on. Instead wait until the dew condensation disappears, otherwise it may cause some damage to the

monitor.

(Cautions for the Use of the Touch Panel)

During touch operation

Be careful of the following points. Otherwise, damage may occur to the monitor.

• Do not strongly press, scratch, or poke the panel.

• Do not touch the panel with hard objects such as ballpoint pens or metals.

4

Notice for this monitor

Cleaning

The stains on the cabinet and LCD panel surface can be removed by moistening part of a soft cloth with water.

Attention

• Do not allow liquid to enter the clearance between the panel and the panel frame.

• Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet

or LCD panel, and also quality deterioration of the image.

• Never use thinner, benzine, wax, or abrasive cleaner as they may damage the cabinet or LCD panel surface.

Note

• It is recommended that ScreenCleaner (available as an option) be used to clean the cabinet and LCD panel surface.

To use the monitor comfortably

• An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor

according to the environmental conditions.

• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.

5

CONTENTS

Notice for this monitor ......................................... 3

Cleaning .................................................................... 4

To use the monitor comfortably ............................. 4

CONTENTS ............................................................. 5

Chapter 1 Introduction ....................................... 6

1-1. Features ......................................................... 6

1-2. Controls and Functions ............................... 7

1-3. EIZO LCD Utility Disk.................................... 8

●

Disk contents and software overview ............. 8

●

To use touch panel driver ................................ 8

1-4. Supported Resolutions ................................ 9

●

Analog Signal (D-Sub) Input ........................... 9

●

Digital Signal (DVI-D) Input ............................. 9

1-5. Changing the Computer Display

Settings .........................................................10

●

Windows 10 ....................................................10

●

Windows 8.1 / Windows 7 ..............................10

●

macOS ...........................................................11

Chapter 2 Basic Adjustment/Setting .............. 12

2-1. Button Operation Method ...........................12

2-2. Switching Input Signals ..............................13

2-3.

Switching Display Modes (Color Modes)

...13

●

Display Modes ................................................13

2-4. Conserving Energy ......................................14

2-5. Adjusting Brightness ..................................16

2-6. Adjusting Volume.........................................16

Chapter 3 Advanced Adjustment/Setting ...... 17

3-1. Basic Operation of the Setting Menu ........17

3-2. Setting Menu Functions ..............................18

●

Color Adjustment ............................................18

●

Signal Settings ...............................................21

●

Preference Settings ...................................... 23

●

Language .......................................................24

●

Information .....................................................24

Chapter 4 Administrator Settings ................... 25

4-1. Basic Operation of the “Administrator

Settings” Menu ............................................ 25

4-2. Functions of the “Administrator

Settings” Menu ............................................ 26

Chapter 5 Troubleshooting .............................. 27

5-1. No Picture .................................................... 27

5-2. Imaging Problems (For Both Digital and

Analog) ......................................................... 28

5-3. Imaging Problems (For Analog Only) ....... 29

5-4. Touch Panel Problems ............................... 29

5-5. Other Problems ........................................... 30

Chapter 6 Reference ........................................ 31

6-1. Attaching the Optional Arm ........................ 31

6-2. Connecting Multiple PCs ........................... 32

6-3. Specications ............................................. 33

Appendix .............................................................. 35

Trademark ............................................................... 35

License .................................................................... 35

Information for Radio Interference ...................... 36

LIMITED WARRANTY ..............................................37

Recycling Information ............................................47

Chapter 1 Introduction

Thank you very much for choosing an EIZO color LCD monitor.

1-1.

Features

• 17" LCD

• Supports a resolution of 1280 x 1024

• LED backlight LCD panel

The LED backlight provides better power efciency and reduced power consumption compared to existing

uorescent backlight LCD panels. No mercury, a hazardous substance, is used.

• Touch Panel provided

- Surface Acoustic Wave technology

The touch panel provides high durability and is highly transmissible. The surface can also be

controlled while wearing hand gloves.

• Stereo speakers

• Power saving function

Suppressing the power consumption reduces the carbon dioxide emissions. This product is equipped with

various power saving functions.

- Auto EcoView function

The sensor on the front side of the monitor detects the environmental brightness to adjust the

screen brightness automatically and comfortably. Unnecessary high brightness is bad for the

environment because of the higher power consumption, and it increases strain on the eyes. You

can lower the brightness by using Auto EcoView.

See “2-4. Conserving Energy” (page 14).

6

Chapter 1 　Introduction

1-2.

Controls and Functions

1

9 10 118

7

6

5432

1

1. Speakers Outputs audio.

2. Ambient light sensor

Detects the ambient brightness. When Auto EcoView is used, the screen brightness is

automatically adjusted to the ambient brightness (page 14).

3. Control buttons Displays menus. Operate the buttons according to the operation guide (page 17).

4. Power button Turns the power on or off.

5. Power indicator

Indicates the monitor's operation status.

Blue: Normal operation mode

Orange: Power saving mode

OFF: Power off

6. Security lock slot Complies with Kensington's MicroSaver security system.

7. Stand Used to adjust the angle of the monitor screen.

8. Power connector Connects the power cord.

9. Input signal

connectors

Left: DVI-D connector / Right: D-Sub mini 15-pin connector

10. USB upstream port Connects the PC to the monitor with a USB cable.

11. Stereo mini jack

If you connect an external device using the stereo mini jack cable, external audio can be

output from the monitor.

7

Chapter 1 　Introduction

1-3.

EIZO LCD Utility Disk

An "EIZO LCD Utility Disk" (CD-ROM) is supplied with this product. The following table shows the disk

contents and the overview of the software programs.

● Disk contents and software overview

The disk includes adjustment software, touch panel software, and user's manuals. Refer to Readme.

txt le on the disk for software startup procedures or le access procedures.

Item Overview Windows Macintosh

A "Readme.txt" le √ √

Screen adjustment pattern les Used when adjusting the image of analog

signal input manually.

√ √

Touch Panel Driver Driver software required for operating the

touch panel monitor on Windows.

√ -

User's Manual of this monitor (PDF le) √ √

Installation Guide for Touch Panel Driver (PDF le) √ -

● To use touch panel driver

For information on the system requirements of the touch panel driver and how to install or operate

them, see the Installation Guide (on the CD-ROM).

The latest software and installation guide are available for download from our web site.

www.eizoglobal.com

8

Chapter 1 　Introduction

1-4.

Supported Resolutions

The monitor supports the following resolutions.

● Analog Signal (D-Sub) Input

Resolution Vertical Scan Frequency

640 × 480 60Hz

720 × 400 70Hz

800 × 600 56 / 60Hz

1024 × 768 60Hz

1280 × 800 60Hz

1280 × 960 60Hz

1280 × 1024

*1

60Hz

*1 Recommended resolution

● Digital Signal (DVI-D) Input

Resolution Vertical Scan Frequency

640 × 480 60Hz

720 × 400 70Hz

800 × 600 60Hz

1024 × 768 60Hz

1280 × 800 60Hz

1280 × 960 60Hz

1280 × 1024

*1

60Hz

*1 Recommended resolution

9

Chapter 1 　Introduction

1-5.

Changing the Computer Display Settings

If the image is not displayed properly after connecting the monitor to a PC, follow the procedure below to

change the display settings on the computer.

● Windows 10

1. Right-click the mouse anywhere on the desktop except on icons. A menu is displayed.

2. From the displayed menu, click "Display Settings". The "Settings" screen is displayed.

3. If multiple monitors, including notebook PC screens, are connected to the computer, select

"Extend these displays" in the "Multiple displays" menu, and then click "Keep changes" on the

conrmation screen. After changing the settings, select a monitor in the "Select and rearrange

displays" menu.

4. Select the "Make this my main display" option in the "Multiple displays" menu. This enables the

monitor to display images properly.

5. Conrm that the recommended resolution for the monitor is set in the "Resolution" menu.

("(Recommended)" is displayed after the resolution.)

6. To change the size of text and icons, select a magnication in the menu of zoom percentages

according to personal preference.

7. If a message prompting you to sign out is displayed after changing the settings, sign out and then

sign in again.

● Windows 8.1 / Windows 7

* For Windows 8.1, click the "Desktop" tile on the Start Screen to display the desktop.

1. Right-click the mouse anywhere on the desktop except on icons. A menu is displayed.

2. From the displayed menu, click "Screen resolution". The settings screen is displayed.

3. If multiple monitors, including notebook PC screens, are connected to the computer, select

"Extend these displays" in the "Multiple displays" menu, and then click "Apply". Click "Keep

changes" on the conrmation screen.

4. Select a monitor in the "Display" menu, and then select the "Make this my main display" option

and click "Apply". This enables the monitor to display images properly.

5. Conrm that the recommended resolution for the monitor is set in the "Resolution" menu.

("(Recommended)" is displayed after the resolution.)

6. To change the size of text and icons, click "Make text and other items larger or smaller", select a

size according to personal preference on the settings screen, and then click "Apply".

7. If a message prompting you to sign out/log off is displayed after changing the settings, sign out/

log off and then sign in/log in again.

10

Chapter 1 　Introduction

● macOS

1. Select "System Preferences" from the Apple menu.

2. When the "System Preferences" panel is displayed, click "Displays".

3. If multiple monitors, including notebook PC screens, are connected to the computer, make sure

that "Mirror Displays" is not selected on the "Arrangement" tab. If it is selected, remove the check

mark.

4. Select the "Display" tab, and make sure that "Default for display" is selected for "Resolution". If

it is not selected, add a check mark. The correct resolution has now been set for your display.

Close the "System Preferences" panel. If multiple monitors, including notebook PC screens, are

connected to the computer, congure these settings in "Display" on each monitor.

5. To select a resolution according to personal preference, select "Scaled" and then select a

resolution (either from a list or icons), and then close the panel.

11

Chapter 1 　Introduction

12

Chapter 2

Basic Adjustment/Setting

Chapter 2 Basic Adjustment/Setting

This product enables users to change the brightness according to personal preference or to suit the usage

environment and reduce power consumption to conserve energy.

This chapter describes the basic functions that can be adjusted and set using the buttons on the front of the

monitor.

For advanced adjustment and setting procedures using the Setting menu, see “Chapter 3 Advanced

Adjustment/Setting” (page 17).

2-1. Button Operation Method

1.

Displaying the operation guide

1. Press any button (except ).

The operation guide appears on the screen.

2.

Adjusting/setting

1. Press a button for adjustment/setting.

The Adjustment/Setting menu appears.

(A submenu may also be displayed. In this case, select the item for adjustment/setting using

and

select

.)

2. Perform adjustment/setting with the buttons and select to accept the changes.

3.

Exiting

1. Select to exit the menu.

13

Chapter 2

Basic Adjustment/Setting

2-2. Switching Input Signals

When a monitor has multiple signal inputs, the signal to display on-screen can be changed.

2-3. Switching Display Modes (Color Modes)

This product is preinstalled with color modes for various display purposes.

Switch the mode according to the purpose and content for display. This allows the monitor to display

images in a manner appropriate to the display content.

●

Display Modes

Color Mode Purpose

User1

User2

Select either of these modes to set a user-dened display mode.

sRGB

This mode is suitable for matching color reproduction with peripheral devices that

support sRGB, such as when printing photos taken using a digital camera.

Paper

This mode uses color tones and contrast similar to that of paper to produce a printed

paper effect. It is suitable for displaying images from media such as books and

documents.

Note

• In Paper mode, the amount of blue light emitted from the screen is reduced by changing the color tone and

controlling the brightness.

14

Chapter 2

Basic Adjustment/Setting

2-4. Conserving Energy

This monitor is equipped with EcoView functions to enable users to conserve energy.

You can use this function to curtail unnecessary power consumption and save on electricity expenses.

Saving power also reduces carbon dioxide emissions.

Note

• The power saving level (Power Reduction, CO

2

Reduction, and Eco Performance Level) can be checked on the

“EcoView Settings” menu. The more indicators that light up representing the Eco Performance Level, the higher

the power saving level attained.

- Power Reduction: the reduction in the backlight’s power consumption as a result of the adjusted brightness

value.

- CO

2

Reduction: converted from the “Power Reduction” value, this is an estimate of the quantity of CO

2

emissions reduced when using the monitor for 1 hour.

• The numeric value is a result of calculation based on a default setting (0.000555t-CO2/kWh) determined by a

Japanese ministerial ordinance (2006, Ministry of Economy, Trade and Industry, Ministry of Environment, civil

code article 3) and may differ depending on country and year.

15

Chapter 2

Basic Adjustment/Setting

Function Description

Auto EcoView The ambient light sensor on the front of the monitor detects the

ambient brightness to automatically adjust the screen brightness

to a comfortable level using the Auto EcoView function. The power

consumption of the backlight can be curtailed by adjusting the

brightness to an appropriate level.

This function can also mitigate eye strain and tiredness caused by a

screen that is too bright or too dark.

Use the “Advanced Settings” to set the automatic adjustment range to

suit the monitor’s usage environment or personal preference.

Setting Value: On, Off

Note

• Be careful not to block the ambient light sensor on the lower side

of the monitor when using the Auto EcoView function.

• Even when the Auto EcoView setting is “On”, the operation button

(

) on the front of the monitor or color adjustment can be used

to change the “Brightness” to suit your personal preference.

Moreover, the manner in which the Auto EcoView function changes

brightness also differs according to the changed value.

Advanced

Settings

Maximum

Minimum

Brightness

Set the range for automatic brightness adjustment.

By setting the maximum value and minimum value of the adjustment

range in advance, the brightness will be adjusted automatically within

the set range.

Setting Value: 0 to 100

Note

• The maximum and minimum brightness values cannot be set to

the same value.

Ambient Light

Using the default setting is recommended.

(Default setting: “Bright” for maximum value, “Dark” for minimum value)

Setting Value: Bright, Dark, Standard

Note

• For details on the “Ambient Light” setting, refer to our web site

(www.eizoglobal.com).

Reset Return the advanced settings to their default values.

16

Chapter 2

Basic Adjustment/Setting

2-5. Adjusting Brightness

The brightness of the screen can be adjusted to suit the installation environment or personal preference.

The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD

back panel).

Setting Value

0 to 100

Note

• When Auto EcoView is set to “On”, the adjustment range is restricted as follows. (For details on Auto EcoView,

see “Auto EcoView” (page 15).)

- The brightness setting cannot be increased or decreased past the maximum and minimum brightness values

specied in the advanced settings of Auto EcoView.

- Brightness may not be adjusted when the installation environment of the monitor is excessively bright or dark.

2-6. Adjusting Volume

The volume of each speaker can be set.

Setting Value

0 to 30

17

Chapter 3

Advanced Adjustment/Setting

Chapter 3 Advanced Adjustment/Setting

This chapter describes the advanced monitor adjustment and setting procedures using the Setting menu.

For basic functions, see “Chapter 2 Basic Adjustment/Setting” (page 12).

3-1. Basic Operation of the Setting Menu

1.

Menu display

1. Press any button (except ).

The operation guide appears.

2. Select .

The Setting menu appears.

2.

Adjusting/setting

1. Select a menu to adjust/set with and select .

The Sub menu appears.

2. Select an item to adjust/set with and select .

The Adjustment/Setting menu appears.

3. Perform adjustment/setting with or and select to accept the changes.

The Sub menu appears.

Selecting

during adjustment/setting will cancel the adjustment/setting and restore the state prior to

making changes.

3.

Exiting

1. Selecting several times will terminate the Setting menu.

18

Chapter 3

Advanced Adjustment/Setting

3-2. Setting Menu Functions

●

Color Adjustment

The color mode setting status can be adjusted according to personal preference.

Attention

• It takes about 30 minutes for the display of the monitor to stabilize. Please wait 30 minutes or more after

power to the monitor has been turned on before adjusting the monitor.

• The same image may be observed in different colors on multiple monitors due to monitor-specic

characteristics. Make ne color adjustments visually when matching colors across multiple monitors.

Functions that can be adjusted differ depending on the color mode.

√: Adjustable -: Not adjustable

Function

Color Mode

Description

User1

User2

sRGB Paper

Color Mode √ √ √ Select the desired mode according to the monitor

application.

The color mode setting status can also be adjusted

according to personal preference. Select the mode

for adjustment and perform adjustment using the

relevant functions.

Setting Value: User1, User2, sRGB, Paper

Note

• For details on the adjustment status of each

mode, see “2-3. Switching Display Modes

(Color Modes)” (page 13).

Brightness √ √ √

The screen brightness is adjusted by changing the

brightness of the backlight (light source from the

LCD back panel).

Setting Value: 0 to 100

Note

• If the screen is too dark even when the

brightness is set to 100 or too bright even when

it is set to 0, adjust the contrast.

19

Chapter 3

Advanced Adjustment/Setting

√: Adjustable -: Not adjustable

Function

Color Mode

Description

User1

User2

sRGB Paper

Contrast √ - - The brightness of the screen is adjusted by varying

the video signal level.

Setting Value: 0 to 100

Note

• A contrast of 50 displays every color gradation.

• When adjusting the monitor, it is recommended

to perform brightness adjustment, which does

not lose gradation characteristics, prior to

contrast adjustment.

• Perform contrast adjustment in the following

cases.

- If the image is too dark even when the

brightness is set to 100 (Set the contrast to

higher than 50.)

- If the image is too bright even when the

brightness is set to 0. (Set the contrast to

lower than 50.)

Temperature √ - √

Adjust the color temperature.

The color temperature is normally used to express

the hue of “White” and/or “Black” with a numerical

value. The value is expressed in degrees “K”

(Kelvin).

The screen becomes reddish at low color

temperatures and bluish at high color temperatures,

similar to the temperatures of a ame. A gain

preset value is set for each color temperature

setting value.

Setting Value: Off, 4000 K to 10000 K (in

increments of 500 K. 9300 K is included.)

Note

• The value shown in “K” is available only as a

reference.

• “Gain” allows you to perform more advanced

adjustment.

• If set to “Off”, the image is displayed in the

preset color of the LCD panel (Gain: 100 for

each RGB channel).

• When the gain is changed, the color

temperature setting changes to “Off”.

Gamma √ - -

Adjust the gamma.

While the brightness of the monitor varies

depending on the input signal, the variation rate is

not proportional to the input signal. Maintaining the

balance between the input signal and brightness of

the monitor is referred to as “Gamma correction”.

Setting Value: 1.8, 2.0, 2.2, 2.4

Note

• If “Paper” is selected for the color mode,

“Paper” is displayed for the gamma value.

20

Chapter 3

Advanced Adjustment/Setting

√: Adjustable -: Not adjustable

Function

Color Mode

Description

User1

User2

sRGB Paper

Advanced

Settings

Hue √ - - Adjust the hue.

Setting Value: -50 to 50

Note

• Using this function may prevent some color

gradations from being able to be displayed.

Saturation √ - -

Adjust the color saturation.

Setting Value: -50 to 50

Note

• Using this function may prevent some color

gradations from being able to be displayed.

• The minimum value (-50) changes the screen

to monochrome.

Gain √ - -

The brightness of each red, green, and blue color

component is referred to as “Gain”. The hue of

“white” can be changed by adjusting the gain.

Setting Value: 0 to 100

Note

• Using this function may prevent some color

gradations from being able to be displayed.

• The gain value changes according to the color

temperature.

• When the gain is changed, the color

temperature setting changes to “Off”.

Reset √ √ √ Reset any color adjustments for the currently

selected color mode back to the default settings.

La pagina si sta caricando...

Eizo FDS1721T Manuale utente

Eizo FDS1721T Manuale utente

in altre lingue

Documenti correlati

Altri documenti