Eizo MS230W Manuale utente

Important

Please read PRECAUTIONS, this User’s Manual, and the Setup Manual

(separate volume) carefully to familiarize yourself with safe and

effective usage.

•Please refer to the Setup Manual for basic information ranging from

connection of the monitor to a PC to using the monitor.

•The latest User’s Manual is available for download from our web site:

http://www.eizo.com

Cover

2

Location of Caution Statement

This product has been adjusted specically for use in the region to which it was originally shipped. If operated

outside this region, the product may not perform as stated in the specications.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,

electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.

EIZO Corporation is under no obligation to hold any submitted material or information condential unless prior

arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every effort has been

made to ensure that this manual provides up-to-date information, please note that EIZO monitor specications are

subject to change without notice.

3



Notice for this monitor

This product is suited to clinical review. It does not support the display of mammography images for diagnosis.

This product has been adjusted specically for use in the region to which it was originally shipped. If the product is

used outside the region, it may not operate as specied in the specications.

This product may not be covered by warranty for uses other than those described in this manual.

The specications noted in this manual are only applicable when the following are used:

· Power cords provided with the product

· Signal cables specied by us

Only use optional products manufactured or specied by us with this product.

As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the monitor 30 minutes or more

after the monitor power has been turned on.

Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term use and maintain a

stable display.

When the screen image is changed after displaying the same image for extended periods of time, an afterimage may

appear. Use the screen saver or power save function to avoid displaying the same image for extended periods of time.

Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer to

“Cleaning” (page 4)).

The screen may have defective pixels or a small number of light dots on the screen. This is due to the characteristics of

the panel itself, and is not a malfunction of the product.

The backlight of the LCD panel has a xed life span. When the screen becomes dark or begins to icker, please contact

your dealer.

Do not press on the panel or edge of the frame strongly, as this may result in display malfunctions, such as interference

patterns, etc. If pressure is continually applied to the panel, it may deteriorate or damage your panel. (If the pressure

marks remain on the panel, leave the monitor with a black or white screen. The symptom may disappear.)

Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do not attempt

to brush with tissues as this may scratch the panel.

When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may

occur on the interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead wait until

the dew condensation disappears, otherwise it may cause some damage to the monitor.

4

Cleaning

Attention

• Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet or

panel, and also quality deterioration of the image.

• Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the cabinet or panel.

Note

• The optional ScreenCleaner is recommended for cleaning the cabinet and panel surface.

If necessary, the stains on the cabinet and panel surface can be removed by moistening part of a soft cloth

with water.

To use the monitor comfortably

• An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according

to the environmental conditions.

• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.

5

CONTENTS

Cover ...................................................................... 1

Notice for this monitor ............................................ 3

CONTENTS ............................................................. 5

Chapter 1 Introduction ....................................... 7

1-1. Features ......................................................... 7

1-2. Basic Operations and Functions ................ 8

●BasicAdjustmentmenuoperations................ 8

●Functions......................................................... 9

Chapter 2 Adjusting Screens .......................... 10

2-1. Setting Screen Resolution ..........................10

●CompatibleResolutions/Frequencies............10

●SettingtheResolution....................................10

Windows8/Windows7..............................10

WindowsVista............................................10

WindowsXP................................................10

MacOSX....................................................10

2-2. Displaying Screen Correctly.......................11

●DigitalSignalInput.........................................11

●AnalogSignalInput........................................11

2-3. Adjusting Color ............................................15

●Toselectthedisplaymode(CALSwitch

mode).............................................................15

●Toperformadvancedadjustments................15

●Adjustablesettingsineachmode..................16

●Toadjustbrightness<Brightness>................16

●Toadjustcontrast<Contrast>........................17

●Toadjustcolortemperature<Temperature>..17

●Toadjustgamma<Gamma>..........................18

●Toadjustthecolorsaturation<Saturation>...18

●Toadjusthue<Hue>......................................18

●Toadjustgain<Gain>....................................19

●Tosetoverdriveintensity<Overdrive>..........19

2-4. Changing the Screen Size .......................... 20

●Tochangescreensize<ScreenSize>......... 20

●Tochangethebrightnessofthenon-

displayarea<BorderIntensity>.................... 20

Chapter 3 Setting Monitor ............................... 21

3-1. Adjusting Volume <Volume> ......................21

3-2. Switching sound source for DisplayPort

signal input <Source> .................................21

3-3. Setting Adjustment Menu Display ............ 22

●ChangingAdjustmentMenuDisplay

Size<MenuSize>......................................... 22

●ChangingAdjustmentMenuDisplay

Position<MenuPosition>............................. 22

●ChangingAdjustmentMenuDisplay

Time<MenuOffTimer>................................ 22

●ChangingTransparencyofAdjustment

MenuDisplay<Translucent>......................... 23

3-4. Locking Buttons .......................................... 23

3-5. Setting the EIZO Logo Display <Logo> .... 23

3-6. Setting Orientation <Orientation> ............ 24

3-7. Setting Language <Language> ................. 24

3-8. Enabling/Disabling DDC/CI

communication ........................................... 25

3-9. Resetting the Monitor to the Default

Settings <Reset> ......................................... 25

●Toresetthecoloradjustments...................... 25

●Toresetalladjustmentstothedefault

settings.......................................................... 25

Chapter 4 Power Saving Functions ................ 26

4-1. Setting Power Saving <Power Save> ........ 26

●Monitor.......................................................... 26

●AudioOutput................................................. 27

4-2. Setting Power Indicator <Power

Indicator> ..................................................... 27

4-3. Enabling/Disabling Automatic

Brightness Adjustment “Auto EcoView” . 27

4-4. Setting Indicator “EcoView Index” ........... 28

4-5. Shifting to the power saving mode when

a person leaves the monitor “EcoView

Sense” .......................................................... 29

4-6. Enabling/Disabling Auto Power-OFF

<Off Timer> .................................................. 30

Chapter 5 Troubleshooting .............................. 31

Chapter 6 Reference ........................................ 34

6-1. How to Attach the Optional Arm ............... 34

6-2. Attaching the FlexStand ............................. 36

6-3. Connecting Multiple PCs ............................37

●Toswitchamonginputsignals.......................37

●Tosetinputsignalselection<InputSignal>. 38

6-4. Displaying Monitor Information

<Information> .............................................. 38

6-5. Specications ............................................. 39

6-6. Glossary ....................................................... 42

6-7. Preset Timing .............................................. 44

Appendix .............................................................. 45

Trademark ............................................................... 45

FCC Declaration of Conformity ............................ 46

Hinweise zur Auswahl des richtigen

Schwenkarms für Ihren Monitor ......................47

Hinweis zur Ergonomie : ........................................47

LIMITED WARRANTY ............................................. 48

6CONTENTS

China Measures for RoHS Compliance in

ChinaRoHS ........................................................ 57

7

Chapter1Introduction

Chapter 1 Introduction

Thank you very much for choosing an EIZO color LCD monitor.

1-1. Features

• 23″ wide format LCD

• Applicable to the resolution of 1920 × 1080.

• Uses high-contrast panel (3000:1).

Enables the display of sharp images.

• VA panel with 89° horizontal and vertical viewing angles

• Applicable to DisplayPort (applicable to 8 bit)*

The image signal and audio signal can both be transmitted via a single DisplayPort cable.

* WhentransmittinganaudiosignalusingtheDisplayPortcable,thegraphicsboardmustbecompatible

withaudiooutput(See“6-5.Specications”(page39)).

• CAL Switch function for selecting an optimal calibration mode

See “To select the display mode (CAL Switch mode)” (page 15).

• Selectable DICOM (page 42) Part 14 complied screen.

• Frame Synchronous mode supported (59 - 61 Hz).

• Power saving function.

This product is equipped with various power saving functions.

- EcoView Sense function

The sensor on the front side of the monitor detects the movement of a person. When a person moves away from the

monitor, it shifts to the power saving mode automatically and does not display the images on the screen. Therefore,

the function reduces the power consumption.

See “4-5. Shifting to the power saving mode when a person leaves the monitor “EcoView Sense”” (page 29).

- EcoView Index function

The green indicator shows the power consumption ratio responding to the brightness of the monitor. You can

realize the power consumption reduction by taking consideration in the ratio of power saving.

See “4-4. Setting Indicator “EcoView Index”” (page 28).

• Portrait/Landscape display available.

• HDCP (High-bandwidth Digital Content Protection)

• Built-in speakers and headphone jack

Note

• This monitor supports the Portrait/Landscape display. This function allows you to change the orientation of

the Adjustment menu when using the monitor screen in vertical display position (See “3-6. Setting Orientation

<Orientation>” (page 24)).

• For using the monitor with “Portrait” position, the graphics board supporting portrait display is required. When

placing the monitor in a “Portrait” position, settings of your graphics board need to be changed. Refer to the manual

of the graphics board for details.

• The stand of the unit can be replaced with an arm or another stand (See “6-1. How to Attach the Optional Arm” (page

34))..

8Chapter1Introduction

1-2. Basic Operations and Functions

● Basic Adjustment menu operations

1. Displaying Adjustment Menu

1. Press . The adjustment menu appears.

2.

Adjusting/Setting

1. Choose a menu to adjust/set with , , , , and then press . The Sub menu appears.

2. Choose an item to adjust/set with , , , , and then press . The adjustment/ setting menu appears.

3. Adjust/set the selected item with , , , , and then press .

3.

Exiting

1. Choose <Return> from the Sub menu and press . The Main menu appears.

2. Choose <Exit> from the Main menu and press . The Adjustment menu exits.

Note

• The Adjustment menu can also be exited by pressing twice quickly.

• <Exit> or <Return> can also be selected by pressing twice or three times in the Main menu or Sub menu.

9

Chapter1Introduction

● Functions

The following table shows all the Adjustment menu’s adjustment and setting menus.

Main menu Setting Reference

AutoAdjustment*1 Screen “2-2.DisplayingScreenCorrectly”

(page11)

Range

Screen Clock*1

Phase*1

Position*1

Smoothing

Return

Color*2 Brightness “2-3.AdjustingColor”(page15)

Contrast

Temperature

Gamma

Saturation

Hue

Gain

Overdrive

Reset

Sound Volume “3-1.AdjustingVolume<Volume>”

(page21)

Source*3 “3-2.Switchingsoundsourcefor

DisplayPortsignalinput<Source>”

(page21)

PowerSave “4-1.SettingPowerSaving<Power

Save>”(page26)

PowerManager PowerSave

OffTimer “4-6.Enabling/DisablingAuto

Power-OFF<OffTimer>”(page30)

Others ScreenSize “2-4.ChangingtheScreenSize”

(page20)

BorderIntensity

InputSignal “Tosetinputsignalselection<Input

Signal>”(page38)

Menu

Settings

MenuSize “3-3.SettingAdjustmentMenu

Display”(page22)

MenuPosition

MenuOffTimer

Translucent

Orientation “3-6.SettingOrientation

<Orientation>”(page24)

Powerindicator “4-2.SettingPowerIndicator

<PowerIndicator>”(page27)

Reset “3-9.ResettingtheMonitortothe

DefaultSettings<Reset>”(page25)

Information “6-4.DisplayingMonitorInformation

<Information>”(page38)

Language “3-7.SettingLanguage

<Language>”(page24)

*1Analogsignalinputonly

*2Theadjustment/settingsavailableonthe<Color>menudependontheselectedColormode.Theabove

tableshowsthesubmenuswhenthe“Custom”modeisselected.

*3ThisfunctionisavailablewithDisplayPortinput.

10 Chapter2AdjustingScreens

Chapter 2 Adjusting Screens

2-1. Setting Screen Resolution

● Compatible Resolutions/Frequencies

For details on compatible resolutions, refer to “Compatible Resolutions/Frequencies” in the Setup Manual.

● Setting the Resolution

When you connect the monitor to the PC and nd that the resolution is improper, or when you want to change

the resolution, follow the procedure below.

Windows 8 / Windows 7

1. For Windows 8, click the “Desktop” tile on the Start Screen to display the desktop.

2. Right-click the mouse anywhere on the desktop except for icons.

3. From the displayed menu, click “Screen resolution”.

4. On the “Screen Resolution” dialog box, select the monitor.

5. Click “Resolution” to select the desired resolution.

6. Click the [OK] button.

7. When a conrmation dialog box is displayed, click [Keep changes].

Windows Vista

1. Right-click the mouse anywhere on the desktop except for icons.

2. From the displayed menu, click “Personalize”.

3. On the “Personalization” window, click “Display Settings”.

4. On the “Display Settings” dialog box, select the “Monitor” tab and select desired resolution in the

“Resolution” eld.

5. Click the [OK] button.

6. When a conrmation dialog box is displayed, click [Yes].

Windows XP

1. Right-click the mouse anywhere on the desktop except for icons.

2. From the displayed menu, click “Properties”.

3. When the “Display Properties” dialog box is displayed, click the “Settings” tab and select desired

resolution for “Screen resolution” under “Display”.

4. Click the [OK] button to close the dialog box.

Mac OS X

1. Select “System Preferences” from the Apple menu.

2. When the “System Preferences” dialog box is displayed, click “Displays” for “Hardware”.

3. On the displayed dialog box, select the “Display” tab and select desired resolution in the “Resolutions”

eld.

4. Your selection will be reected immediately. When you are satised with the selected resolution, close

the window.

11

Chapter2AdjustingScreens

2-2. Displaying Screen Correctly

● Digital Signal Input

When digital signals are input, images are displayed correctly based on the preset data of the monitor, but if

characters and/or lines appear blurred, go to “6. Modify blurred characters or lines.” (page 14).

When performing more advanced adjustment, see “2-3. Adjusting Color” (page 15) and subsequent pages.

● Analog Signal Input

Attention

• The monitor will take about 30 minutes before its internal electric components stabilize. Wait 30 minutes or more

after turning the monitor power on before starting adjustment.

• The Self Adjust (automatic screen adjustment) function does not work for the images under the resolution of 800 ×

600 (SVGA).

The monitor screen adjustment is used to suppress ickering of the screen or adjust screen position and

screen size correctly according to the PC to be used.

Note

• The Self Adjust function works when all of the following conditions are satised:

- When a signal is input into the monitor for the rst time or when a resolution or vertical/horizontal scan frequency

not used before is set

If the screen is not displayed correctly even after performing the Self Adjust operation, adjust the screen

according to the procedures on the following pages to use the monitor comfortably.

Setting Procedures

1. Perform the auto adjustment.

● To adjust ickering, screen position, and screen size automatically <Screen>

Procedure

1. Choose <Auto Adjustment> from the Adjustment menu, and press .

2. Choose <Screen> from the <Auto Adjustment> menu, and press .

The <Auto Adjustment> menu appears.

3. Select <Execute> with or , and press .

Flickering, screen position, and screen size are corrected by the auto-adjustment function.

Attention

• This function works correctly when an image is fully displayed over the Windows or Macintosh display area. It does

not work properly when an image is displayed only on a part of the screen (command prompt window, for example)

or when a black background (wallpaper, etc.) is in use.

• This function does not work correctly with some graphics boards.

Ifthescreenisnotdisplayedcorrectlyevenafterperforming“1.Performtheautoadjustment.”(page11),

performtheadjustmentsaccordingtotheproceduresonthefollowingpages.Ifthescreenisdisplayed

correctly,goto“5.Adjustingcolorgradation.”(page14).

12 Chapter2AdjustingScreens

2.

Prepare to use analog screen adjustment patterns.

Download the “Screen adjustment pattern les” from our site: http://www.eizo.com.

Note

• For details and instructions on opening the “Screen adjustment pattern les”, refer to the Readme.txt le.

3.

Perform the auto adjustment again with the analog screen adjustment pattern

displayed.

● To adjust ickering, screen position, and screen size automatically <Screen>

Procedure

1. Display Pattern 1 in full screen on the monitor using the “Screen adjustment pattern les”.

2. Choose <Auto Adjustment> from the Adjustment menu, and press .

3. Choose <Screen> from the <Auto Adjustment> menu, and press .

The <Auto Adjustment> menu appears.

4. Select <Execute> with or , and press .

Flickering, screen position, and screen size are corrected by the auto-adjustment function.

Ifthescreenisnotdisplayedcorrectlyevenafterperforming“3.Performtheautoadjustmentagain

withtheanalogscreenadjustmentpatterndisplayed.”(page12),performtheadjustmentsaccordingto

theproceduresonthefollowingpages.Ifthescreenisdisplayedcorrectly,goto“5.Adjustingcolor

gradation.”(page14).

4.

Choose <Screen> from the Adjustment menu to perform advanced

adjustments.

Adjust the clock, phase and position, in this order.

● To eliminate vertical bars <Clock>

Procedure

1. Choose <Clock> from the <Screen> menu, and press .

The <Clock> menu appears.

2. Adjust the clock with or to eliminate vertical bars.

Press or slowly so as not to miss the adjustment point.

3. Press to exit the adjustment.

When blurring, ickering or bars appear on the screen after adjustment, proceed to “Phase” to remove ickering or

blurring.

13

Chapter2AdjustingScreens

● To remove ickering or blurring <Phase>

Procedure

1. Choose <Phase> from the <Screen> menu, and press .

The <Phase> menu appears.

2. Adjust the phase with or to minimize ickering or blurring.

3. Press to exit the adjustment.

When vertical bars appear on the screen after adjustment, go back to “To eliminate vertical bars <Clock>”.

(Clock → Phase → Position)

Attention

• Flickering or blurring may not be eliminated depending on your PC or graphics board.

● To correct the screen position <Position>

Note

• Since the number of pixels and the pixel positions are xed on the LCD monitor, only one position is provided to

display images correctly. The position adjustment is made to shift an image to the correct position.

Procedure

1. Choose <Position> from the <Screen> menu, and press .

The <Position> menu appears.

2. Adjust the position with / / / .

3. Press to exit the adjustment.

4. Close Pattern 1.

14 Chapter2AdjustingScreens

5.

Adjusting color gradation.

● To adjust color gradation automatically <Range>

Every color gradation (0 to 255) can be displayed by adjusting the signal output level.

Procedure

1. Display Pattern 2 in full screen on the monitor using the “Screen adjustment pattern les”.

2. Choose <Auto Adjustment> from the Adjustment menu, and press .

3. Choose <Range> from the <Auto Adjustment> menu, and press .

The <Range> menu appears.

4. Select <Execute> with or , and press .

The output range is set automatically.

5. Close Pattern 2.

6.

Modify blurred characters or lines.

● To modify blurred characters/lines <Smoothing>

When an image is displayed with a resolution other than recommended, the characters or lines of the

displayed image may blur.

Attention

• Smoothing setting may not be required depending on the display resolution. (You cannot choose the smoothing icon.)

Adjustable range

1 to 5

Procedure

1. Choose <Screen> from the Adjustment menu, and press .

2. Choose <Smoothing> from the <Screen> menu, and press .

The <Smoothing> menu appears.

3. Use or for adjustment.

4. Press to exit the adjustment.

15

Chapter2AdjustingScreens

2-3. Adjusting Color

● To select the display mode (CAL Switch mode)

This function allows easy selection of a desired mode according to monitor application.

Display Modes

Mode Purpose

Custom Availableformakingdesiredsetting.

sRGB SuitableforcolormatchingwithsRGBcompatibleperipherals.

Text Suitablefordisplayingtextsforwordprocessingorspreadsheets.

DICOM AvailabletodisplayinDICOMmode.

Movie Suitableforplayingbackanimatedimages.

Displaysthecurrentmode.

Procedure

1. Press or .

A mode name appears at the lower left of the screen.

2. Change the mode by pressing or while the mode name is displayed.

→Custom←→sRGB←→Text←→DICOM←→Movie←

Note

• The Adjustment menu cannot be displayed when a mode name appears.

● To perform advanced adjustments

The <Color> menu of the Adjustment menu allows you to congure and save a separate set of color settings

for each mode.

Attention

• The monitor will take about 30 minutes before its internal electric components stabilize. Wait 30 minutes or more

after turning the monitor power on before starting adjustment.

• Perform the range adjustment rst when adjusting color for analog signals (see “To adjust color gradation

automatically <Range>” (page 14)).

• The same image may be seen in different colors on multiple monitors due to their monitor-specic characteristics.

Make ne color adjustment visually when matching colors on multiple monitors.

Note

• The values shown in “%” or “K” are available only as reference.

16 Chapter2AdjustingScreens

● Adjustable settings in each mode

The adjustable settings depend on the mode. (You cannot select any non-adjustable or non-settable function.)

√: Adjustable -: Not adjustable

Icon Function CAL Switch mode

Custom sRGB Text DICOM Movie

Brightness √ √ √ - √

Contrast √-√-√

Temperature √-√-√

Gamma √-√--

Saturation √-√-√

Hue √-√-√

Gain √----

Overdrive √----

Reset √ √ √ - √

● To adjust brightness <Brightness>

The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD

back panel).

Adjustable range

0 to 100%

Procedure

1. Choose <Color> from the Adjustment menu, and press .

2. Choose <Brightness> from the <Color> menu, and press .

The <Brightness> menu appears.

3. Use or for adjustment.

4. Press to exit the adjustment.

Note

• You can use or to display the Brightness adjustment menu to adjust it.

• If you feel that the image is too bright even if the brightness is set to 0% or that the image is too dark even if the

brightness is set to 100%, adjust the contrast.

17

Chapter2AdjustingScreens

● To adjust contrast <Contrast>

The brightness of the screen is adjusted by varying the video signal level.

Adjustable range

0 to 100%

Procedure

1. Choose <Color> from the Adjustment menu, and press .

2. Choose <Contrast> from the <Color> menu, and press .

The <Contrast> menu appears.

3. Use or for adjustment.

4. Press to exit the adjustment.

Note

• In the contrast of 50%, every color gradation is displayed.

• When adjusting the monitor, it is recommended to perform the brightness adjustment which may not lose the

gradation characteristics, prior to the contrast adjustment.

• Perform the contrast adjustment in the following cases.

- When you feel the image is too dark even if the brightness is set to 100% (Set the contrast to higher than 50%.)

- When you feel the image is too bright even if the brightness is set to 0% (Set the contrast to lower than 50%.)

● To adjust color temperature <Temperature>

Color temperature can be adjusted.

The color temperature is normally used to express the hue of “White” and/or “Black” by a numerical value.

The value is expressed in degrees “K” (Kelvin).

The screen becomes reddish at a low color temperature, and bluish at a high color temperature, like the ame

temperature. A gain preset value is set for each color temperature setting value.

Adjustable range

Off, 4000K-10000K (specied by every 500K unit, including 9300K)

Procedure

1. Choose <Color> from the Adjustment menu, and press .

2. Choose <Temperature> from the <Color> menu, and press .

The <Temperature> menu appears.

3. Use or for adjustment.

4. Press to exit the adjustment.

Note

• <Gain> allows you to perform more advanced adjustment (see “To adjust gain <Gain>” (page 19)).

• If you set to “Off”, the image is displayed in the preset color of the monitor (Gain: 100% for each RGB).

• When gain is changed, the color temperature is changed to “Off”.

18 Chapter2AdjustingScreens

● To adjust gamma <Gamma>

Gamma can be adjusted. The brightness of the monitor varies depending on the input signal, however, the

variation rate is not proportional to the input signal. To keep the balance between the input signal and the

brightness of the monitor is called as “Gamma correction”.

Adjustable range

1.8, 2.0, 2.2

Procedure

1. Choose <Color> from the Adjustment menu, and press .

2. Choose <Gamma> from the <Color> menu, and press .

The <Gamma> menu appears.

3. Use or for adjustment.

4. Press to exit the adjustment.

● To adjust the color saturation <Saturation>

This function allows you to adjust color saturation.

Adjustable range

-128 to 127

Procedure

1. Choose <Color> from the Adjustment menu, and press .

2. Choose <Saturation> from the <Color> menu, and press .

The <Saturation> menu appears.

3. Use or for adjustment.

4. Press to exit the adjustment.

Attention

• Using this function may make some color gradations unavailable for display.

Note

• The minimum value (-128) changes the screen to monochrome.

● To adjust hue <Hue>

This function allows you to adjust hue.

Adjustable range

-32 to 32

Procedure

1. Choose <Color> from the Adjustment menu, and press .

2. Choose <Hue> from the <Color> menu, and press .

The <Hue> menu appears.

3. Use or for adjustment.

4. Press to exit the adjustment.

Attention

• Using this function may make some color gradations unavailable for display.

19

Chapter2AdjustingScreens

● To adjust gain <Gain>

The brightness of each color component red, green, and blue is called “Gain”. You can change the hue of

“white” by adjusting gain.

Adjustable range

0 to 100%

Procedure

1. Choose <Color> from the Adjustment menu, and press .

2. Choose <Gain> from the <Color> menu, and press .

The <Gain> menu appears.

3. Adjust gain with or for each of red, green, and blue.

4. Press to exit the adjustment.

Attention

• Using this function may make some color gradations unavailable for display.

Note

• The value of gain changes with that of color temperature.

• When gain is changed, the color temperature is changed to “Off”.

● To set overdrive intensity <Overdrive>

This function allows you to set overdrive intensity based on the use of the monitor. You can reduce Image

lags by setting it to “Enhanced” when displaying animated images.

Adjustable range

Enhanced, Standard, Off

Procedure

1. Choose <Color> from the Adjustment menu, and press .

2. Choose <Overdrive> from the <Color> menu, and press .

The <Overdrive> menu appears.

3. Use or for adjustment.

4. Press to exit the adjustment.

Attention

• The overdrive function is disabled in the following cases:

- The vertical scan frequency of input signals is more than 60 Hz.

- Select “Normal” during <Screen Size> (excluding the case that display resolution is 1920 × 1080).

20 Chapter2AdjustingScreens

2-4. Changing the Screen Size

● To change screen size <Screen Size>

If a resolution other than recommended is used, the image displayed in full screen automatically. You can

change the screen size by using <Screen Size> from <Others> menu.

Setting Function

FullScreen Displaysanimageinfullscreen.Imagesaredistortedinsomecasesbecausethe

verticalrateisnotequaltothehorizontalrate.

Enlarged Displaysanimageinfullscreen.Insomecases,ablankhorizontalorverticalborder

appearstoequalizetheverticalrateandthehorizontalrate.

Normal Displaysimageswiththespeciedresolution.

Example: Image size 1024 × 768

FullScreen Enlarged Normal

(1920×1080) (1440×1080) (1024×768)

Procedure

1. Choose <Others> from the Adjustment menu, and press .

2. Choose <Screen Size> from the <Others> menu, and press .

The Screen Size menu appears.

3. Select “Full Screen,” “Enlarged,” or “Normal” with or .

4. Press to exit the adjustment.

Attention

• Selecting “Normal” may make some color gradations unavailable for display.

● To change the brightness of the non-display area <Border Intensity>

A border (black area with no image) around the image appears in the “Normal” or “Enlarged” mode.

Border

Procedure

1. Choose <Others> from the Adjustment menu, and press .

2. Choose <Border Intensity> from the <Others> menu, and press .

The <Border Intensity> menu appears.

3. Use or for adjustment.

4. Press to exit the adjustment.

La pagina sta caricando ...

Eizo MS230W Manuale utente

Eizo MS230W Manuale utente

in altre lingue

Documenti correlati