ProStart CT-4810D Manuale del proprietario

Marca: ProStart

Modello: CT-4810D

Categoria: Avviatori remoti

Tipo: Manuale del proprietario

OWNER’S GUIDE

GUIDE DE L'UTILISATEUR

MODEL

MODÈLE

CT4810D

500-10696 2016-09

ProStart is committed to delivering world

class quality products and services that

excite and delight our customers.

ProStart s’engage à offrir des produits et

services de qualité de classe mondiale qui

raviront nos clients.

www.prostartsystems.com

034-0839-6

Congratulations

Congratulations on the purchase of your state-of-the-art remote start

and keyless entry system. Reading this Owner’s Guide prior to using

your system will help maximize the use of your system and its many

features. For any additional questions please contact your authorized

Directed dealer or contact Directed at 1-800-361-7271.

Important information

Government Regulations and Safety information

Read the Government Regulations and Warning! Safety

First sections of this manual prior to operating this system.

Warning! Failure to heed this information can result in

death, personal injury or property damage and may also

result in the illegal use of the system beyond its intended

purpose.

Your Warranty

Your system comes with a warranty. The warranty terms are detailed at

the end of this guide. Make sure that you receive the proof of purchase

from your dealer, indicating the product was installed by an autho-

rized Directed dealer.

Replacement remote controls

Please see your authorized dealer to order additional remote controls.

Remote control part numbers are found on the back of the device.

500-10696-01 20161018

Contents

Getting Started .................................................................................................... 3

Keys to using this manual ...................................................................... 3

Remote Control Information .................................................................................. 4

Control Center .................................................................................................... 4

Using your System ............................................................................................... 5

Commanding the system ....................................................................... 5

Performing Commands ......................................................................... 5

Remote Control Command table ............................................................ 6

Fault Condition alerts ........................................................................... 6

Basic Commands (Direct Access) .......................................................................... 7

Lock ................................................................................................... 7

Unlock ................................................................................................ 7

Remote Start* ...................................................................................... 7

AUX/Trunk** ...................................................................................... 8

Advanced Commands: (Level 1) ........................................................................... 9

Silent Lock........................................................................................... 9

Runtime Reset ...................................................................................... 9

AUX 1 ................................................................................................ 9

Temperature Request ** ..................................................................... 10

Advanced Commands: (Level 2) ......................................................................... 11

Remote Valet .................................................................................... 11

Timer Start* ...................................................................................... 11

AUX 2** .......................................................................................... 11

Advanced Commands: (Level 3) ......................................................................... 13

Car finder ......................................................................................... 13

Smart Start* ...................................................................................... 13

AUX 3** .......................................................................................... 13

Runtime Remaining ............................................................................ 14

Advanced Commands: (Level 4) ......................................................................... 15

Defogger* ........................................................................................ 15

AUX 4* ............................................................................................ 15

Keypad Lock ..................................................................................... 16

Page Mode* ..................................................................................... 16

Car 2 ............................................................................................... 17

Remote Beep ..................................................................................... 17

Emergency Override ......................................................................................... 18

Remote Start Features ........................................................................................ 19

Key Takeover..................................................................................... 19

Remote Start Safe-lock ...................................................................... 19

Disabling Remote Start ..................................................................... 19

Advanced Start ................................................................................. 20

Temperature Reporting ........................................................................ 21

Remote Start Time-out Alert .................................................................. 21

Pit Stop Mode ................................................................................... 21

Manual Transmission Start (MTS mode) ................................................ 22

Remote Start Faults ............................................................................. 23

Remote and System Operations .......................................................................... 24

Passive Locking* ................................................................................ 24

Auto Re-locking* ............................................................................... 24

Valet Mode ....................................................................................... 25

Power Save ....................................................................................... 25

Rapid Resume ................................................................................... 25

Car Select ......................................................................................... 25

Out of Range .................................................................................... 26

No Remote Output ............................................................................. 26

System Expansion Options ................................................................................. 27

Battery Information ............................................................................................ 28

Low Battery ....................................................................................... 28

Battery Life ........................................................................................ 28

Battery Replacement ........................................................................... 29

Battery Disposal ................................................................................ 29

Glossary of Terms .............................................................................................. 30

Patent Information ............................................................................................. 30

Government Regulations .................................................................................... 31

Warning! Safety First ......................................................................................... 33

Installation ........................................................................................ 33

Remote Start Capable ........................................................................ 33

Manual Transmission Vehicles ............................................................. 33

Interference ....................................................................................... 35

Upgrades ......................................................................................... 35

Water/Heat Resistance ...................................................................... 35

Limited lifetime consumer warranty ..................................................................... 36

Getting Started

Keys to using this manual

Speciﬁc actions (in bold type) and style conventions are used consis-

tently throughout this manual, they are as follows:

• Press: implies pushing in and releasing a button.

• Hold: is used after Press actions when a button needs to be held

in position for an extended period of time, typically several sec-

onds.

• Italicized words denote section/sub headings in this guide and

can be located through the table of contents.

• An asterisk (*) when used after a word or phrase denotes that

additional details can be found in related sections usually noted

at the bottom of the page or end of the section.

• Conﬁrmation LED’s are identiﬁed by the command/function but-

ton they are associated with.

Remote Control Information

Feature Description

Internal Antenna Used for transmitting and receiving*information

Command buttons (4)

A U X

AUX

Used to perform locking, unlocking, auxiliary channel and

remote start commands

Function button

A U X

Used to access function levels for commands, configura-

tion menus for programming, Car Selection, and to request

reports.

Confirmation LED’s Each button has an associated LED next to it that are active

during related operations. These LED’s are labeled respec-

tively as:

Lock LED, Unlock LED, Remote Start LED, and Aux LED

*2-way communication is only applicable to the ProStart LED

remote control.

Control Center

The Control Center, typically located on the upper part of the front

windshield. It consists of:

• The In-vehicle system antenna.

• The Status LED, as a visual indicator of the system’s status.

• The Control button, for placing the system into Valet Mode* and

to perform the Emergency Override operation.

* See “Remote and System Operations” on page 24.

Using your System

Commanding the system

Commands, Basic or Advanced, are used to activate system features

and are performed by pressing one of the Command buttons. Basic

commands control the most often used keyless entry and remote start

features while Advanced commands control more specialized fea-

tures.

Conﬁrmations for Basic or Advanced commands are indicated

by horn honks* and parking light ﬂashes. A description of each fea-

ture conﬁrmation is found in the following Basic command and Ad-

vanced command sections.

Performing Commands

Perform Basic commands by pressing a Command button.

Perform Advanced Commands by ﬁrst accessing Levels 1-4 using the

AUX

button and then by pressing a Command button while within a

level.

Advanced command example: Silent Lock

1. Press the

AUX

button once to access Function Level 1.

2. Press the

AUX

button to perform the Silent Lock command.

3. The system will lock the doors and ﬂash the parking lights,

without horn honks.*

* The optional Horn Honk feature must be connected

Remote Control Command table

Basic

Commands

Advanced Commands

Button

Level

Direct Access

A U X

x 1

A U X

x 2

A U X

x 3

A U X

x 4

A U X

Lock Silent Lock

A U X

Unlock Silent Unlock Remote Valet Car Finder

A U X

Remote Start Reset Runtime Timer Start Smart Start Defogger

AUX

Aux/Trunk* AUX 1 AUX 2 AUX 3 AUX 4

A U X

Advance

Level, Change

Car (3 sec),

Enter program-

ming (8 sec)

Temperature

Check*

(2-way only)

Lock Status

(2-way only)

Runtime

Remaining

(2-way only)

*This is an optional feature. See your authorized ProStart dealer for details.

Fault Condition alerts

If, when performing a command, a condition exists that does not al-

low activation of the remote start feature* a fault tone plays to alert of

the fault condition.

* Remote Start feature not available when the Remote Start status is

incorrect upon receiving the command. (Example: Runtime reset com-

mand received when remote start is off)

Refer to the notes included in the command descriptions that address

these faults or go to Remote Start Faults under the Remote Start Fea-

tures section for more details.

Basic Commands (Direct Access)

No conﬁrmation LED’s on.

Lock

Press and release

AUX

Doors lock. The horn honks and the parking lights ﬂash. Lock LED turns

on with a beep.

To Lock and Panic

Press and hold

AUX

To lock the system, then activate Panic. For Panic to be effective,the

optional horn honk feature must be connected. Press the

AUX

button to stop Panic output.

Unlock

Press and release

AUX

The doors unlock. The horn honks and the parking lights ﬂash. Unlock

LED turns on and remote beeps.

Remote Start*

Press and release

AUX

Activates (or if On, deactivates) the remote starter. The engine turns

On, or the engine turns Off accordingly. The parking lights ﬂash.

Remote Start LED turns on, and plays tones.

If a Remote start conﬁguration issue prevents the engine from starting,

the parking lights ﬂash a Remote Start fault report to identify the fault.

AUX/Trunk**

Press and hold AUX.

The Aux LED turns on and tones play to conﬁrm. The Trunk opens (if

conﬁgured) when this button is pressed for 2 seconds.

* For Manual transmission vehicles see “Manual Transmission Start

(MTS mode)” on page 22 in the “Remote Start Features” sec-

tion for more details.

**This is an optional feature, see your authorized dealer for details.

Advanced Commands: (Level 1)

Press and release the

AUX

button 1 time ﬁrst, before pressing one of the

following command buttons.

Silent Lock

Press and release

AUX

The doors lock, without horn honks.* The Lock LED turns on to conﬁrm.

Silent Unlock

Press and release

AUX

Doors unlock, without horn honks. The parking lights ﬂash. The Unlock

LED turns on to conﬁrm.

Runtime Reset

Press and release

AUX

If more time is needed while remote start is active, runtime reset will

reset the runtime counter to the pre-programmed setting. The conﬁrma-

tion LED’s show the runtime and the remote start On tones play to

conﬁrm runtime reset.

Note

Remote Start must be On to use this feature.

AUX 1

Press and release

AUX

Activates (or if On, deactivates) the Aux 1 output. The Aux LED turns

on and tones play to conﬁrm.

See your authorized dealer for details about conﬁguring this button.

Temperature Request **

Press and hold the

AUX

button

Requests the vehicle’s interior temperature and displays it by illuminat-

ing the conﬁrmation LED’s; cold is 1 LED, cool (2), warm (3), warmer

(4)

* The optional Horn Honk feature must be connected.

**This is an optional feature, see your authorized dealer for details.

Advanced Commands: (Level 2)

Press and release the

AUX

button 2 times ﬁrst, before pressing one of

the following command buttons.

Remote Valet

Press and release

AUX

Enters (or if On, exits) Valet Mode. The Control Center LED turns on

and off accordingly, and prevents doors from locking passively. The

The Unlock LED and Valet beeps play (1 for on, 2 for off) to conﬁrm.

Timer Start*

Press and release

AUX

Activates (or if On, deactivates) Timer Start. The parking lights ﬂash

quickly four times for On and slowly four times for Off. The Remote

Start LED and beeps play (1 for on, 2 for off) to conﬁrm.

Note

System needs to be locked or Timer Start will not start the

engine.

AUX 2**

Press and release

AUX

Activates (or if On, deactivates) the Aux 2 output. The Aux LED and

On tones or Off tones play to conﬁrm.

See your authorized dealer for details about conﬁguring this button

Lock Status

Press and hold the

AUX

button.

The remote will generate an output using the LED’s and beeps/tones

to display the systems Lock Status since its last update message or

command operation. It will report status via conﬁrmation LED’s, beeps,

and tones as described in this section for Lock, Unlock, Valet mode

and Silent lock.

* See “Advanced Start” on page 20 for details.

** This feature must be turned on by an authorized ProStart dealer.

Advanced Commands: (Level 3)

Press and release the

AUX

button 3 times ﬁrst, before pressing one of

the following command buttons.

Car ﬁnder

Press and release

AUX

The horn emits one long honk and the parking lights ﬂash for 10 sec-

onds. The parking light ﬂashes stop if locked or unlocked while Car

Finder is in progress. Lock and Unlock cancels the parking light ﬂash.

Smart Start*

Press and release

AUX

Activates (or if On, deactivates) Smart Start. The parking lights ﬂash

quickly ﬁve times for On and slowly ﬁve times for Off. The Remote

Start LED and beeps play (1 for on, 2 for off) to conﬁrm.

Note

System needs to be locked or Smart Start will not start the

engine. This function is dependent on parameters that are

programmed by your dealer. Consult your authorized deal-

er for more information.

AUX 3**

Press and release

AUX

Activates (or if On, deactivates) the Aux 3 output. The Aux LED and

On tones or Off tones play to conﬁrm. See your authorized ProStart

dealer for details.

See your authorized dealer for details about conﬁguring this button.

Runtime Remaining

Press and hold the

AUX

button

Requests the remaining Remote start runtime and temporarily displays

it in 4 increments using the Conﬁrmation LED’s.

Example for 12 minute runtime:

• 3 LED’s: 6 to 9 minutes remaining (50 - 75% of time selected).

• 1 LED: less than 3 minutes remaining (<25% of time selected).

Note: Remote start must be On to use this feature.

*See “Advanced Start” under “Remote Start Features” for more de-

tails.

** This feature must be turned on by an authorized ProStart dealer.

Advanced Commands: (Level 4)

Press and release the

AUX

button 4 times ﬁrst, before pressing one of

the following command buttons.

Defogger*

Press and release

AUX

Activates the vehicle Defogger circuit (if connected) while Remote Start

is activated and the parking lights ﬂash 3 times. The Remote start LED

and 1 beep play to conﬁrm. For convenience, the Defogger circuit

will also automatically activate 10 seconds after remote starting if the

temperature is below 55°F.

Note

Remote Start must be active to use this feature.

AUX 4*

Press and release

AUX

Activates (or if On, deactivates) the Aux 4 output. The Aux LED and

On tones or Off tones play to conﬁrm.

* This feature must be installed/turned on by an authorized ProStart dealer.

The Defogger also requires the optional temperature sensor to automatically

trigger with temperature.

Keypad Lock

Options: Off, Auto

When Off, the buttons do not lock and always perform a command

when pressed. When set to Auto, the remote buttons lock after a 20

second lapse between button presses to prevent unintentional opera-

tions. If a button is pressed when locked the a fault tone plays as an

alert. The 1-way companion emits the fault tone only.

To unlock the buttons, press the

AUX

button followed by the

AUX

button.

The Conﬁrmation LEDs ﬂash and tones play to conﬁrm unlocking.

Auto unlocking

After turning the ignition off, a message to the ProStart LED will

unlock the keypad buttons until the next command is performed.

If Auto Unlocking is not desired this message can be turned off

by an authorized ProStart Dealer.

Page Mode*

Options: Power Save 1, Power Save 2, On, Off.

The ProStart LED remote monitors your system’s messages via Paging.

When Paging is On the remote wakes up every few seconds to detect

pages from the system. When Off the remote does not wake up to

receive pages from the system.

Power Save extends battery life by turning Paging Off after one week,

if the remote control is not used during this period. Just press any button

to resume system monitoring. See Battery Life.

* This option is not available with the 1- way companion remote.

Car 2

Options: Off, On

The remote controls can control two systems independently. When set

to Off, the Car Select feature is not available. When set to On the Car

Select feature is enabled.

See Car Select (under Remote and System Operations ) for detail on

using a remote with 2 systems.

Remote Beep

Options: On, Off

The ProStart LED will emit a beep as conﬁrmation of button presses

and command responses. When set to Off, beeps are not emitted for

any operations except programming.

For 1-way companion remote control, Off will delete all beeps except

when programming.

To save changes and exit the remote feature programming mode,

press the

AUX

button once and then press and hold, the transmit LED

shuts off conﬁrming exit.

La pagina sta caricando ...

ProStart CT-4810D Manuale del proprietario

Marca: ProStart

Modello: CT-4810D

Categoria: Avviatori remoti

Tipo: Manuale del proprietario

Scarica il pdf

rapporto

in altre lingue

English: ProStart CT-4810D Owner's manual

ProStart CT-4810D Manuale del proprietario

ProStart CT-4810D Manuale del proprietario

in altre lingue

Altri documenti