Canon XA60 Manuale utente

Categoria
Videocamere
Tipo
Manuale utente
PUB.DIE-0566-000A
4K Camcorder
Instruction Manual
2
Trademark Acknowledgements
SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC.
Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
macOS is a trademark of Apple Inc., registered in the U.S. and other countries.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc. in the United States and other countries.
USB Type-C™ and USB-C™ are trademarks of USB Implementers Forum.
Other names and products not mentioned above may be trademarks or registered trademarks of their respective companies.
This device incorporates exFAT technology licensed from Microsoft.
“Full HD 1080” refers to Canon camcorders compliant with high-definition video composed of 1,080 vertical pixels
(scanning lines).
This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4
compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-
commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video. No license is
granted or implied for any other use for MPEG-4 standard.
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER
USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC
VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY
OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM
3
Highlights of the Camcorder
The Canon XA65 / XA60 4K Camcorder is a high-performance camcorder whose compact size
makes it ideal in a variety of situations. The following are just some of the many functions featured in
the camcorder.
4K Recording
CMOS sensor and DIGIC DV 6 image
processor
The camcorder is equipped with a
1/2.3-inch CMOS sensor that captures video
at an effective pixel count of approximately
8.29 megapixels (3840x2160). The video is
then processed by the DIGIC DV 6 image
processor. In addition to recording 4K video,
the camcorder employs oversampling to
record Full HD video.
XF-AVC and MP4 formats
You can choose the video format according to
your workflow needs. You can record in XF-
AVC format or MP4 format. Both formats use
the MPEG-4 AVC/H.264 codec, but XF-AVC
clips are recorded as Material eXchange
Format (MXF files), compatible with all major
non-linear (NLE) editing software.
Wide zoom lens and 8-bladed aperture
The zoom lens is equipped with 20x optical
zoom and has a focal length at full wide angle
of 29.3 mm* (35 mm equivalent), making the
camcorder versatile in a variety of shooting
situations. The 8-bladed aperture delivers a
pleasing out-of-focus blur (“bokeh”) to your
recordings.
* When the resolution is 3840x2160 and the
image stabilization is a setting other than
Dynamic IS. The focal length is 30.6 mm
when using Dynamic IS.
4K recording at 29.97P and HD
recording at 59.94P
The camcorder can record clips in MP4 or XF-
AVC format at 3840x2160 with a frame rate of
29.97P or 1920x1080 with a frame rate of
59.94P, giving you the freedom to choose the
video configuration that is most suitable for
your project. Furthermore, audio is recorded as
either 4-channel linear PCM or 2-channel AAC.
Convenience and Functionality
Recording for extended periods
With its two SD card slots, the camcorder
allows you to use dual recording (A 32) to
record the same clip on two SD cards, or relay
recording to automatically switch to the other
SD card when the one being used becomes
full. Dual recording is a convenient way to
create a backup of your recordings while relay
recording effectively extends the available
recording time.
Emphasis on versatility
This camcorder has features to make it usable
as a main camera but is also small enough to
be very portable. The advanced image
stabilization (A66), which stabilizes the
image along 5 axes, will let you shoot in a
variety of situations in the field. The handle unit
is removable so you can attach it to enjoy
additional audio options and infrared
functionality, or remove it when you need
improved portability. The LCD touch panel and
viewfinder can be angled in a variety of
positions, allowing for shooting in tight places,
for example.
Manual controls at your fingertips
The focus/zoom ring helps you achieve the
focus you are looking for. You can easily
change the ring's functionality so that you can
operate the zoom. You can also assign certain
frequently used functions to a customizable
button and adjust those functions with the
accompanying dial (A87). Additionally, the
camcorder also features 5 assignable buttons
on the camcorder and one onscreen
assignable touch button to which you can
assign a variety of functions to access them
with ease (A88).
4Face detection & tracking (A 64)
After detecting a subject's face, the camcorder
can focus on it and even track it. Furthermore,
the camcorder can be in manual focus but
switch to autofocus when a face is detected,
ensuring that important subjects are in focus.
Infrared recording
Record in darkness using infrared recording
(A82). With the built-in infrared light on the
handle unit, you can record nocturnal animals
in their natural environment or other such
scenes.
Creativity and Artistic Expression
Special recording modes (A40, 80)
When you make recordings, you can change
the recording frame rate to achieve a fast or
slow motion effect. Alternatively, you can use
pre-recording to record 3 seconds before you
decide to start recording, helping you capture
those hard-to-catch opportunities.
Looks (A54)
You can adjust various aspects of the picture,
such as the color depth, sharpness and
brightness, to create a desired “look”.
Custom picture settings (A90)
Select one of the preset color settings or set
the combination of gamma curve, color space
and color matrix that you wish to use. Then,
you can adjust a number of other image-
related parameters in detail.
Enhanced audio features (A 71)
The attachable handle unit offers expanded
audio options. It features two INPUT terminals
for external microphones (balanced input),
manual control over the audio recording level,
and control for supplying phantom power to an
external microphone
Other Features
• Menu settings file that can be saved in the
camcorder or on an SD card to restore all the
menu settings or replicate them on another
XA65 / XA60 camcorder (A98).
• Battery packs compatible with Intelligent
System give you an estimate (in minutes) of
the remaining recording time.
• Compatibility with the optional GP-E2 GPS
Receiver to geotag your recordings (A85).
• Compatibility with the optional RC-V100
Remote Controller (A83) when you need a
professional level of remote control.
5
1 Introduction 8
About this Manual 8
Conventions Used in this Manual 8
Supplied Accessories 10
Names of Parts 11
2 Preparations 16
Charging the Battery Pack 16
Using a Power Outlet 17
Preparing the Camcorder 19
Attaching the Microphone Holder
Unit 19
Attaching the Handle Unit 19
Using the Lens Hood 20
Adjusting the LCD Screen 20
Using the Viewfinder 21
Grip Belt and Straps 22
Basic Operation of the Camcorder 23
Turning the Camcorder On and Off 23
Setting the Camera Mode 24
Using the MENU Button and
Joystick 24
First Time Settings 25
Setting the Date and Time 25
Changing the Language 26
Changing the Time Zone 26
Using the Menus 27
Setup Menus 27
FUNC Menu 28
Using SD Cards 30
Compatible SD Cards 30
Inserting and Removing an SD Card 31
Initializing an SD Card 32
Selecting the SD Card for
Recordings 32
Dual Recording and Relay Recording 32
Recovering Clips 33
3 Recording 34
Recording Clips and Photos 34
Basic Recording 34
Reviewing the Latest Clip Recorded 36
Setting the File Name for XF-AVC
Clips 36
Video Configuration: Resolution, Bit Rate
and Frame Rate 38
Selecting the Video Format 38
Selecting the Resolution and Bit
Rate 38
Selecting the Frame Rate 38
Slow & Fast Motion Recording 40
Shooting Modes 42
Special Scene Modes 43
Exposure Adjustment 45
Manual Exposure (n)45
Momentary Automatic Aperture - Push
Auto Iris 46
Automatic Exposure 46
Touch Exposure 47
Exposure Lock (AE Lock) 48
Exposure Compensation 48
ND Filter 49
Using the Zebra Pattern 49
Backlight Correction 50
Automatic Gain Control (AGC) Limit 51
White Balance 52
Using Looks 54
Zooming 55
Using the Focus/Zoom Ring 55
Using the Zoom Rockers 56
Using the Touch Screen’s Zoom
Controls 58
Using an Optional Remote Controller 58
Soft Zoom Control 58
Digital Tele-Converter 59
Focus Adjustment 60
Manual Focus 60
Autofocus 63
Face Detection & Tracking 64
Image Stabilization 66
Dynamic IS or Standard IS 66
Setting the Time Code 67
Selecting the Time Code Mode 67
Selecting Drop Frame or Non-Drop
Frame 69
Overlaying the Time Code/Date/Time on
the Recorded Image 69
Setting the User Bit 70
Recording Audio 71
Selecting the Audio Recording Format for
MP4 Clips 71
Audio Settings and Recorded Audio
Channels 72
Connecting an External Microphone or
External Audio Input Source to the
Camcorder 73
Table of contents
6
Using Line Input or an External
Microphone Connected to an INPUT
Terminal 74
Adjusting the Microphone’s Sensitivity
(INPUT terminals) 74
Microphone Attenuator (INPUT
terminals) 75
Selecting the Built-in Microphone or an
External Microphone Connected to the
MIC Terminal 75
Audio Recording Level 75
Audio Level Adjustment Using the FUNC
Menu 76
Microphone Sensitivity (Built-in
Microphone) 77
Microphone Attenuator (Built-in
Microphone or MIC Terminal) 77
Low-Cut Filter (Built-in Microphone or
MIC Terminal) 77
Using Headphones 78
Color Bars/Audio Reference Signal 79
Recording Color Bars 79
Recording an Audio Reference
Signal 79
Pre-Recording 80
Onscreen Displays 81
Infrared Recording 82
Using the Optional RC-V100 Remote
Controller 83
Web Camera Function 84
Using the GP-E2 GPS Receiver 85
Connecting the GPS Receiver 85
4 Customization 87
CUSTOM Dial and Button 87
Assignable Buttons 88
Custom Picture Settings 90
Selecting Custom Picture Files 90
Preset Custom Picture 90
Editing a Custom Picture File’s
Settings 91
Protecting Custom Picture Files 91
Displaying the Current Custom Picture
File Settings 92
Saving a Custom Picture File 92
Available Custom Picture Settings 93
Saving and Loading Menu Settings 98
Saving Camcorder Settings 98
Loading Camcorder Settings 98
5 Playback 99
Basic Playback 99
Playback Controls 101
Adjusting the Volume 102
Displaying Clip Information 102
Clip and Photo Operations 103
Deleting Clips and Photos 103
Trimming MP4 Clips 104
6 External Connections 105
Video Output Configuration 105
Connecting to an External Monitor 108
Connection Diagram 108
Selecting the Terminal Used For
Output 108
Using the SDI OUT Terminal 109
Using the HDMI OUT Terminal 109
Audio Output 111
Selecting the Audio Channels for
Headphone or Speaker Output 111
Selecting the Audio Channels for HDMI
Output 111
7 Saving Clips 112
Working with Clips on a Computer 112
Saving MP4 Clips 112
Saving XF-AVC Clips 112
Copying Clips and Photos Between
Cards 114
8 Additional Information 115
Menu Options 115
FUNC Menu 115
Setup Menus 116
Appendix: Onscreen Icons and
Displays 125
Troubleshooting 130
List of Messages 134
Safety Instructions and Handling
Precautions 137
Camcorder 138
Battery Pack 139
SD Card 139
Built-in Rechargeable Lithium
Battery 140
Disposal 140
Maintenance/Others 141
Cleaning 141
7
Condensation 141
Viewing the Certification Logo 141
Using the Camcorder Abroad 142
Optional Accessories 143
Specifications 146
Reference Tables 149
Approximate recording times 149
Charging, Recording and Playback
Times 149
Index 152
About this Manual
8
Introduction
About this Manual
Thank you for purchasing the Canon XA65 / XA60. Please read this manual carefully before you use
the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer
to
Troub leshoo ting
(A130).
Conventions Used in this Manual
IMPORTANT: Precautions related to the camcorder’s operation.
NOTES: Additional topics that complement the basic operating procedures.
A: Reference page number within this manual.
: Used as an abbreviation for the model indicated in the icon. The icon refers to text and
illustrations that apply only to the indicated model.
The following terms are used in this manual:
“SD card” refers to an SD, SDHC or SDXC memory card.
“Screen” refers to the LCD screen and the viewfinder screen.
“Clip” refers to one movie unit from the point you press the START/STOP button to start recording
until you press again to pause the recording.
The photos included in this manual are simulated pictures taken with a still camera. Unless indicated
otherwise, illustrations and menu icons refer to the .
Some screenshots in this manual have been simplified to show only relevant icons.
Before Using the Camcorder
Before making important recordings for the first time, make test recordings using the video
configuration(s) you plan to use to check that the camcorder operates correctly. Should it fail to
operate correctly, refer to
Troubleshooting
(A130).
Copyright notice: Unauthorized recording of copyrighted materials may infringe on the rights of
copyright owners and be contrary to copyright laws.
Notes on privacy and publicity rights regarding the use of video: When using the camcorder, exercise
proper caution in order to protect privacy and avoid any violation of publicity rights.
About the LCD screen and viewfinder: The screen is produced using extremely high-precision
manufacturing techniques, with more than 99.99% of the pixels operating to specification. Very
rarely, pixels may misfire or light up permanently. This has no effect on the recorded image and
does not constitute a malfunction.
About the access indicator: Observe the following precautions while the ACCESS indicator (A31)
is illuminated or flashing in red. Failing to do so may result in permanent data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not open the card compartment cover.
- Do not change the camcorder’s operating mode.
- When a USB cable is connected to the camcorder, do not disconnect the USB cable.
1Introduction
About this Manual
9
Brackets [ ] are used to
refer to onscreen buttons
and menu options you will
select and to other
onscreen messages and
displays.
These icons indicate the camcorder’s operating mode and whether a function is available in that
mode.
: Indicates whether the
camcorder is in shooting (CAMERA) or
playback (MEDIA) mode. In this example, the
function is available only in mode. For
details, refer to
Turning the Camcorder On
and Off
(A23).
: Indicates the camera mode. For
details, refer to
Setting the Camera Mode
(A24).
The > arrow is used to abbreviate menu
selections. For details on how to use the
menus, refer to
Using the Menus
(A27).
For a summary of available menu options
and settings, refer to the appendix
Menu
Options
(A115).
Supplied Accessories
10
Supplied Accessories
The following accessories are supplied with the camcorder:
PD-E1 USB Power Adapter Cable Clamp
(comes pre-attached to the
camcorder)
BP-820 Battery Pack
Microphone holder unit
(incl. screws)
Handle unit (incl. screws) Lens hood with lens barrier
Lens cap Quick Guide
Names of Parts
11
Names of Parts
1 Lens barrier switch (A34)
2SD card slot 2 (A30)
3SD card slot 3 (A30)
4u (review recording) button (A36)/
Assignable button 5 (A88)
5Lens hood (A20)
6 Focus/Zoom ring (A55, 60)
7 CUSTOM (customizable) dial (A87)
8 CUSTOM (customizable) button
(A87)
9 INFRARED switch (A 82)
10 SD card compartment cover
11 DISP (onscreen display) button
(A81)/BATT. INFO (battery
information) button (A17)
32
4
119108765
1
Left side view
Names of Parts
12
1 Built-in speaker (A102)
2MIC terminal (A71)
3 HDMI OUT terminal (A108, 109)
4 REMOTE terminal (A83)
For connecting commercially
available remote controllers.
5 SDI OUT terminal (A109)
6×(headphones) terminal (A78)
7USB terminal (A85)
8DC IN terminal (A16)
9 Cable clamp (A17)
10 Grip belt (A22)
26
73
4
5
10
1
8
9
Right side view
Names of Parts
13
1 Instant AF sensor (A63, 141)
2 AF/MF button (A60)/
Assignable button 1 (A88)
3 PRE REC (pre-recording) button
(A80)/
Assignable button 2 (A88)
4LCD touch screen (A20)
5 Focus/Zoom ring switch (A55, 60)
6 Viewfinder (A21)
7 Dioptric adjustment lever (A21)
8 Joystick/SET button (A24)
9Strap mount (A22)
10 Assignable button 3 (A88)
11 Assignable button 4 (A88)
12 Battery attachment unit (A16)
13 START/STOP button (A34)
14 MENU button (A27)
15 Serial number
1
45
6
7
8
9
14
15
13121110
3
2
Front view
Back view
Names of Parts
14
1 Power switch (A23)
2 POWER / CHG (battery charging)
indicator (A16)
3 Built-in stereo microphone
(A71)
4 Accessory shoe
5 Camera mode switch (A24)
6 Grip zoom rocker (A56)
7 ACCESS indicator (A34)
8 Handle unit mount (A19)
9 Lens hood mount index mark
10 Tripod socket
For mounting the camcorder on a
tripod with a mounting screw 6.2 mm
(0.24 in.) or shorter (A138).
11 BATTERY RELEASE switch (A17)
12 Eye cup (A21)
3
4
5
6
7
8
1
2
9
10
11
12
Top view Bottom view
Names of Parts
15
Handle unit
1 Microphone holder unit (A71)
2 Microphone lock screw (A71)
3 Accessory shoe
4 Handle zoom rocker (A56)
5START/STOP lock (C) lever (A35)
6 START/STOP button (A34)
7 Sensitivity selection switches for
INPUT 1 and INPUT 2 (A74)
8 INPUT terminal ON/OFF switch
(A75)
9 Audio level switches for CH1 and
CH2 (A75)
10 Audio level dials for CH1 and CH2
(A75)
11 Microphone cable clamp (A73)
12 INPUT 1 and INPUT 2 terminals
(collectively referred to as "INPUT
terminals") (A74)
13 Infrared light (A82)
14 Tally lamp (A34)
15 Handle unit front screw (A19)
16 Handle unit rear screws (A19)
23 4 5 6 7 8 9 10
161514131211
1
Charging the Battery Pack
16
Preparations
Charging the Battery Pack
The camcorder can be powered with a battery pack or directly using the PD-E1 USB Power Adapter.
1 Connect the USB power adapter to the camcorder
and plug the power cord into a power outlet.
2 Attach the battery pack to the camcorder.
Press the battery pack softly into the battery attachment
unit and slide it forward until it clicks in place.
3 Charging will start when the camcorder is turned off.
If the camcorder was on, the green POWER/CHG indicator
will go out when you turn off the camcorder. After a
moment, the POWER/CHG indicator will turn on in red
(battery pack charging). The red POWER/CHG indicator will
go out when the battery pack is fully charged.
If the indicator flashes, refer to
Troubleshooting
(A132).
DC IN terminal
POWER/CHG (battery charging) indicator
2Preparations
Charging the Battery Pack
17
To remove the battery pack
1 Slide the BATTERY RELEASE switch in the direction of the
arrow and hold it pressed down ().
2 Slide the battery pack and then pull it out ().
Checking the Remaining Battery Charge
With the camcorder turned off, press the BATT. INFO button to display for about 5 seconds a screen
showing the approximate battery charge level. Note that if the battery charge is too low, the battery
information screen may not appear.
Using a Power Outlet
You can power the camcorder directly from a power outlet
using the USB power adapter.
1 Plug the USB power adapter into a power outlet.
2 Attach the cable clamp to the grip belt and use it to
secure the cable.
The ferrite core should be placed between the USB plug
and the cable clamp.
3 Connect the USB plug to the DC IN terminal.
[DC IN] will be displayed when you turn on the
camcorder.
Charging the Battery Pack
18
IMPORTANT
Do not connect to the USB power adapter any electrical equipment that is not expressly
recommended for use with this camcorder.
Turn off the camcorder before connecting or disconnecting the USB power adapter. After you turn
off the camcorder, important data is updated on the SD card. Be sure to wait until the green
POWER/CHG indicator goes out.
When using the USB power adapter, do not fix it permanently to one place as this may cause a
malfunction.
To prevent equipment breakdowns and excessive heating, do not connect the USB power adapter
to voltage converters for overseas travels or special power sources such as those on aircraft and
ships, DC-AC inverters, etc.
NOTES
We recommend charging the battery pack in temperatures between 10 °C and 30 °C (50 °F and
86 °F). If either the ambient temperature or the battery pack’s temperature is outside the range of
approx. 0 °C to 40 °C (32 °F to 104 °F), charging will not start.
The battery pack will be charged only when the camcorder is off.
If the power supply was disconnected while charging a battery pack, make sure the POWER/CHG
indicator has gone out before restoring the power supply.
If remaining battery time is an issue, you can power the camcorder using the USB power adapter so
the battery pack will not be consumed.
While recording, it is recommended to attach a battery pack to the camcorder even when the USB
power adapter is connected. This will prevent the camcorder from turning off in case of a power
outage or an accidental disconnection of the cable.
Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or
the day before, to ensure a full charge.
The first time you use a battery pack, fully charge it and then use the camcorder until the battery
pack is completely depleted. Doing so will ensure that the remaining recording time will be displayed
accurately.
The camcorder's power consumption may vary depending on the usage conditions. When
recording, it is recommended to prepare a battery charge level that allows for a longer recording
time than planned (2 to 3 times).
For handling precautions regarding the battery pack, refer to
Safety Instructions and Handling
Precautions
(A137).
For charging times and approximate usage times, refer to
Reference Tables
(A149).
Preparing the Camcorder
19
Preparing the Camcorder
This section covers the basic preparations for the camcorder such as attaching the supplied handle
unit and lens hood, and adjusting the viewfinder and LCD screen.
IMPORTANT
Be careful not to drop the camcorder when attaching, removing or adjusting the various
accessories. Using a table or other stable surface is recommended.
Attaching the Microphone Holder Unit
Use the supplied screws to attach the microphone holder unit to
the handle unit.
Attaching the Handle Unit
1 Turn off the camcorder and make sure the POWER/CHG indicator has gone out (A23).
2 Slide the front of the handle unit into the accessory
shoe, as shown in the illustration. Then, slide the handle
unit forward all the way.
Make sure the front and rear screws are raised when you
slide the handle unit.
3 Turn the front screw and two rear screws to secure the
handle unit.
NOTES
The camcorder is functional even if you remove the handle
unit. However, some audio options (A71), the infrared light
(A82) and tally lamp will not be available.
Preparing the Camcorder
20
Using the Lens Hood
While recording, the supplied lens hood with lens barrier is
effective for reducing stray light that can be the cause of lens
flare and ghost images. Additionally, closing the lens barrier
can help prevent fingerprints and dirt accumulation on the
lens.
1 Remove the lens cap.
2 Align the mark on the lens hood with the lens hood
mount index mark on the bottom of the camcorder
(), and then turn the lens hood clockwise until it
stops with a click ().
Be careful not to deform the lens hood.
Make sure that the lens hood is aligned with the thread.
To remove the lens hood, turn it counterclockwise.
NOTES
About the lens cap:
Use the supplied lens cap when carrying the camcorder or storing it after use.
Note that the lens cap and the lens hood with lens barrier cannot be used simultaneously.
Adjusting the LCD Screen
Open the LCD panel 90 degrees.
You can rotate the panel downward or toward the lens.
NOTES
You can adjust the brightness and the backlight level of the LCD screen with the > [£
Display Setup] > [LCD Brightness] or [LCD Backlight] setting respectively. Also, you can hold the
DISP button pressed down for more than 2 seconds to open the [LCD Backlight] setup menu.
Adjusting the brightness does not affect the brightness of recordings.
Using a brighter LCD backlight setting will shorten the effective usage time of the battery pack.
Subject can monitor the LCD screen
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157

Canon XA60 Manuale utente

Categoria
Videocamere
Tipo
Manuale utente

in altre lingue