Remote control via GSM that works by sending and receiving SMS (configurable in 2 languages, Spanish /
English). Ability to operate powered 12V ideal photovoltaic installations.
TELKAN 1 GSM Telephonic Control Via GSM Code:19.077
Manual of installation and use
230V~ +10% -15% 50Hz max. 2VA
DESCRIPTION
Power supply
on Z in alarm
off Z Without alarm
LED´s
SIM card
Application (relay)
5A 250V~ SPST. Relay with free voltage-contact (operation as a switch)
Input for temperature probe
Connection for temperature probe PTC2000 (-40°C ... + 140°C). When the
probe detects that the temperature has crossed the threshold defined by
the user, the controller sends an SMS alarm only to phone number that has
been activate INFO function. (F. MEET, can activate the desired relay).
on Z relay connected
off Z relay disconnected
r1 (Relay)
External antenna connector
Connection for external antenna with magnetic base
Contact closure alarms
When open / close contact for more than 5 seconds generates an alarm
a1 (Alarm)
on Z in temperature alarm
off Z without temperature alarm
blinking Z Connection error
t1 (Probe)
Input for external battery
External input for a sealed lead battery of 12V and a
capacity of 1.2 to 20Ah.
on Z power supply by battery
off Z power supply by 230V~
on Z powered supply
off Z without power supply
on Z wiht signal GSM
off Z without signal GSM
blinking Z sending dates or
SMS received
on Z inserted and operational
off Z without card SIM
blinking Z the card has PIN
(take out of TELKAN & disabled the PIN)
b1 (Battery)
PWR (Power supply)
GSM (Signal)
SIM (Card)
Button ON / OFF
Connect / disconnect the relays manually without sending message.
R1
R2
A1
A2
T1
T2
C1
B1
BA
T
PWR
GSM
SIM
SIM
R1
R2
RELA
Y
ON/OFF
TELKAN
GSM
by Sonder
TELKAN
GSM
by Sonder
L
230V~
N
SIM
ANTENNA
L
N
Contact Alarm
Temperature Probe
PTC2000
T1
A1
+
-
Battery
B1
5A
R1
C
NO
SIM: Works with prepaid card or contract of any company, it is recommended the prepaid for save money. Before
purchasing the SIM, verify what company has the better coverage in the area. (SIM not included)
1 Input for external battery: When detecting a change of power (battery passes network or vice versa) sends
SMS warning of network failure and SMS of service restoration. (Battery not supplied, code: 7.190)
1 Relay 5A: You can activate/deactivate manually or by SMS, activate /deactivate timed and query the status of
the relay.
1 Input for T Probe: allows receive warnings of a temperature alarm, the relay can be linked to temperature
alarm and view the history of temperatures for the last 4 hours via SMS. (Probes not supplied, code: 4.343)
1 Alarm contact: When open / close contact for more than 5 seconds will generate an alarm.
IP65 Box: Box for surface mounting. (Box not supplied, code: 4.914)
Before giving the power to the control, remove the SIM card PIN and insert it into the TELKAN
START UP
333
111
- Measures: Rail-DIN box 4 modules (90x70x58 mm)
- Independent dispositive
- Free-voltage contact relay
- Wiring type: H05VV-F or H05RR-F
- Power supply: 230V~ +10% -15% 50/60Hz max. 2VA
2 2
- Minimum section for cable of: Relay Z 2,5 mm Power supply Z 1 mm
- According normative: EN 60730 / EN 301511 / EN 301489-1 / EN 301489-7
- Contamination degree: clean environment
- Software classe A - Action type 1.B
- Environment: Temperature Z 0°C to 45°C / Humidity Z 20% to 85%
TECHNICAL SPECIFICATIONS
Electrical drawing:
230V~
5 - Connect the control to the power supply 230V~
2 - Check with a mobile phone the SIM (which has no access PIN code, the credit,
sending and receiving SMS).
1 - Install the control away from contactors, motors ... etc. It may be the case with
some contactor with strong electromagnetic peaks need to install a relay
between the output of TELKAN and the contactor coil.
4 - make the rest of connections.
3 - Insert SIM in TELKAN.
444
BAT
PWR
GSM
SIM
BAT
PWR
GSM
SIM
BAT
PWR
GSM
SIM
555
IP20
If the installation was successful should light the LEDs: PWR, SIM and GSM
Cardholder to insert a MiniSIM that is
operational and any company. Does
not work with MiniSIM card or the
phone number doubled. Do not insert
or remove the SIM card with the
Sondertel powered.
OPERATING TEMPERATURE ALARM
30°C
31°C
29°C
Temperature
Device is out of alarm
Device is inside the alarm
Delays are very useful to discriminate when a temperature alarm of a product load in cold rooms where there are short peaks and temperature are controlled.
First off set the temperature for alarm for example 30°C ± 1°C (differential of activation) may also indicate the time that has to remain above or below to consider that is in alarm.
You can define two different values or the same for the delay time (Delay). Factory goes to 0 and alerts at the same time the temperature goes from temp alarm ± 1°C.
5 min.
Actives the alarm in case of being more than 5 minutes (time delay) above 31°C
(temperature alarm + differential) and does not disable the alarm until it is below of
29°C over 5 minutes (temperature alarm - differential)
0000 alarm t1 30
delays 5 minutes for activation and deactivation
Temperature for alarm: 30°C + fixed Dif.: ± 1°C
0000 delay t1 5
SMS
We decline any responsibility for damaged equipment result
- Equipment whose serial number has been damaged,
- Devices whose deterioration is the result of impact or liquid
Reserved the right to change without prior notice.
This device has 3 year warranty according to the date of manufacture,
it is limited to replacement of faulty part. Transport not included.
of poor handling. Not included in the warranty:
deleted or modified.
- Devices whose connection or use has not been executed
according to the instructions accompanying the appliance.
- Apparatus modified without the consent of the manufacturer.
or gaseous emanations.
For the rest of general conditions visit our web.
CONDITIONS OF GUARANTEE
SONDER
Cod.:7259 INGV4 ENE19
delay for activation 5 and 10 minutes for deactivation
0000 delay t1 5 10
- Send an wrong SMS to the TELKAN from a phone that had
previously made valid orders.
- The TELKAN saves the last 5 phone numbers that have given a correct order and if they make a lost call, the TELKAN sends an SMS of state, but the SMS that an alarm has
occurred only is sent to the numbers set in INFORM function.
- The temperature exceeds the limit set by the user
Alarm: T1
T1: 33.5C
A1: off
B1: MAIN
ERROR: invalid language. 0-Castellano, 1-English.
- If a request to change languages includes an invalid number
T1: 26.8C
A1: off
B1: MAIN
- Message received periodically according to set time with
the function Alive activated
IN CASE OF:
SMS received
- If the SMS received by the TELKAN not start with numeric digits and comes from an unknown telephone is interpreted as a message from the phone company:
• If the control is configured with the function PROMO in on, the SMS is forwarding to all phones set in Function Inofrm
• If the control is configured with the function PROMO in off, is deleted.
pwrd +
on - relay on
off - relay off
inform on - receive alarm
test - status
pass xxxx - change password
Probe set for alarm
Reading probe alarm
Disconnected alarm contact
Main power supply
Temperature read by probe T1
Alarm 1 off
Main power supply
Example:
Control device for DIN rail mounting and
connection via fixed pipeline.
Very important:
When installing control ensure you have good
coverage away from contactors and other
signals that may interfere.
Device designed for a situation of pollution
clean.
This control is not a safety device, and can not be
used as such, it is the installer responsibility
incorporate adequate protection to every type
of installation (HOMOLOGATED)
- Make a call to TELKAN from a phone that had previously
made valid orders.
R1: on
T1: 26.8C
A1: off
B1: BATT (11.799V)
Must comply with 2 factors: Temperature + Time Set
Password (set from factory to 0000) + followed by the command:
order - (meaning that order)
SMS Status query:
State relays
Current temperature read by probes
Alarm status
battery connected (value of charge)
Warning! The volatge of
the battery is very low.
BATT (9.112V)
- Message received when the control detects that the
battery power is low.
Warning low battery with charge value
OK
MiniSIM MicroSIM NanoSIM
Sonder Regulación, S.A.
Avda. La Llana, 93
08191 RUBÍ
(Barcelona) Spain
www.sonder.es
The programming is done via SMS messages through a mobile phone. It is imperative to introduce exactly the same characters as they are written in the description. Phones
with call in hidden number identification can only send orders and can not receive confirmation messages.
When TELKAN receives the order, it returns an SMS to the sender with confirmation of the new configuration, if you want to override this SMS (saving money card that
manages the TELKAN) must only add an asterisk (*) at the end of each order (not for relay status query and History temperatures).
To turns relay ON (*)
acces code rNo relay on
È È
0000 on
Turns the relay on and returns a status message to the sender
acces code rNo relay on No minutes
È È È
0000 on 15
Turns the relay on for the number of minutes specified in the message and then switches it OFF. (Adjustable: 1
...64 800 minutes.) This command returns two status messages to the sender: the first to confirming receipt of
the command, and a second message when the relay status changes to OFF.
To turns relay OFF (*)
acces code rNo relé off
È È
0000 off
Turns the relay off and returns a message to the sender indicating the new status.
Exemple of SMS
= 1 space
È
Timed relay activation (*)
Log telephone number for receiving SMS (*) To receive SMS alarm must register the phone number with the function inform on
acces code inform on
È È
0000 inform on
Save the phone number that sent this order to send SMS alarm to occur. Save up to 4 phone numbers, then
you have to clear before sending a new one.
Timed relay deactivation (*)
Reset all phone numbers in memory for receiving SMS (*)
acces code inform reset
È È
0000 inform reset
Deletes ALL the phone numbers stored in memory for alarm notification via SMS.
Operative status (*)
acces code alive No days
È È
0000 alive 1
Sends a test message every number of hours configurated to communicate that status of device is operative (SIM
has money and works correctly). If programmed to 0, the function is off. Range: 0 (off) ... 45 days.
USE SMS MESSAGES TO CHANGES SETTINGS
acces code = 0000 (from factory, change by personal code)
acces code rNo relay off No minutes
È È È
0000 off 15
Turns the relay OFF for the number of minutes specified in the message and then switches it ON. (Adjustable: 1
...64800 minutes.) This command returns two status messages to the sender: the first to confirming receipt of
the command,and a second message when the relay status changes to ON.
Change of acces code
acces code pass new code
È È
0000 pass 1234
Changes the access code (from the factory default of 0000) and returns a confirmation message to the sender
Relays behaviors, MEET (*) You can link any of the relays to any of the inputs (temperature sensor, contact closure alarm, battery)
acces code meet
È
0000 meet
It returns a message with the status of the function on/off and device is connected as the operation of the relay
acces code meet rNo relay a1
È È
È
0000 meet r1 a1
When it detects an contacts alarm relay activates permanently until there is a forced manual or by SMS.
acces code meet rNo relay b1
È È
È
0000 meet r1 b1
When it detects a change in power supply (battery to grid / network battery) activates the relay permanently
until there is a forced manual or by SMS.
Remove phone numbers for receiving SMS (*)
acces code inform off
È È
0000 inform off
Delete the phone number you sent the order for receiving sms alarm.
List of number of phones that receive SMS
acces code inform
È
Returns an SMS to the sender reporting phone numbers that will send the SMS at alarm temperature, contacts,
failure of power supply in net
0000 inform
acces code meet rNo relay t1
È È
È
0000 meet r1 t1
When it detects an temperature alarm (rising or falling humidity) activates the relay permanently until there is a
forced manual or by SMS.
Battery: b1
Relay: r1 Temperature probe: t1
Contact Alarm: a1
IMPORTANT: to receive SMS alarm, alive and other than shipping immediately has to register the phone number on control with the function inform.
acces code alive
È
0000 alive
Sends a SMS with the time remaining for the next send of sms alive
SMS estructure
acces code meet rNo relay off
È È
È
0000 meet r1 off
The relay operation is independent. The relay is activated by SMS or manually pressing the front button TELKAN
(*) It means that this order has the option to override the confirmation message by adding an asterisk at the end of the message
Programm the sending of test message without SMS of confirmation
Example of order without return SMS of confirmation (adding * at the end of the SMS order)
0000 alive 1*
acces code alive No days*
È È
Status Query If you missed a call the number on the SIM, SMS returns a test
acces code test
È
0000 test
Send an SMS to the sender reporting the status of the relay, the time it is connected (if
programmed), status of the GSM signal TELKAN and current temperature.
Version
acces code version
È
0000 version
Send an SMS to the sender informing the program version, modem type, modem signal, voltage for
the power supply (values of battery charge or electric network) & status of PROMO function.
Alarm Settings Query
acces code alarm
È
Returns a text message informing the sender of the setting, on / off and values of the alarms for
temperature, contacts failure of power supply in net..
Checking recent temperatures & readings
acces code avg t1
È È
0000 avg t1
Returns an SMS with the current temperature and the average temperature for the past 1 min, 4
mins, 15 mins, 1 hr and 4 hrs.
0000 alarm
Alarm deactivation (*)
acces code alarm a1 off
È È È
0000 alarm a1 off
Deactivates the alarm function and returns an SMS to confirm the new status.
Alarm activation (*)
acces code alarm a1 on
È È È
0000 alarm a1 on
Activates the contact alarm function and returns an SMS to confirm the new status. If you also
want to alert you when the alarm occurs it is necessary to send the order to inform on.
Alarm activation/deactivation delay (*)
acces code delay a1 minutes minutes
È È È È
0000 delay a1 2 5
Delays on / off contacts alarm (default 0, disabled = reported immediately). You can set a common
value for activation and deactivation (0000 delay 5) or different in each case, two values of
minutes: 0000 delay 5 10). Range (0 ... 240 minutes).
acces code delay b1 minutes minutes
È È È È
0000 delay b1 2 5
Delays on / off failure of power supply alarm (default 0, disabled = reported immediately). The same
operation as the previous order.
acces code delay t1 minutes minutes
È È È È
0000 delay t1 2 5
Delays on / off temperature alarm (default 0, disabled = reported immediately). The same operation
as the previous order.
acces code delay
È
0000 delay
Returns an SMS to the sender informing of delays programmed to alarm temperature. for each of
type alarm, temperature, contacts, failure of power supply...
Alarm contact
Alarm failure of power supply
Alarm temperature
acces code alarm b1 off
È È È
0000 alarm b1 off
Deactivates the alarm function for failure of power supply and returns an SMS to confirm the new
status.
acces code alarm t1 off
È È È
0000 alarm t1 off
Deactivates the alarm function for temperature and returns an SMS to confirm the new status.
acces code alarm b1 on
È È È
0000 alarm b1 on
Activates the alarm function for failure of power supply and returns an SMS to confirm the new
status. If you also want to alert you when the alarm occurs it is necessary to send the order to inform
on.
acces code alarm t1 temperaturE °C
È È È
0000 alarm t1 45
Activates the Temperature alarm function, sets the temperature limit to that sent by the user and
returns an SMS to confirm the new status. If you also want to alert you when the alarm occurs it is
necessary to send the order to inform on.
To change SMS language
acces code lang No new language
È È
0000 lang 0
Changes the language setting (default Spanish) to the selected language No: 0=Spanish, 1=English
Exemple of SMS
Receiving messages Commercials (*) from factory setting in off
acces code promo off
È È
0000 promo off
Sets the control to delete all commercials messages received
acces code promo on
È È
0000 promo on
The control sends at the telephone number registered in function inform, all received messages
that start with text.
Calibration temperature probe t1
acces code cal t1 value to subtract or add
È È È
0000 cal t1 -0.3
Allows you to adjust the probe reading. Using a precision pattern thermometer, look at the current
temperature reading and then adjust the probe reading to the reading of the standard
thermometer. Scale: -10.0 to 10.0, factory set to 0.0.
-
1
-
2
Sonder TELKAN 1 GSM Manual Of Installation And Use
- Tipo
- Manual Of Installation And Use
- Questo manuale è adatto anche per
in altre lingue
- English: Sonder TELKAN 1 GSM
Altri documenti
-
Extraflame GSM Module Manuale del proprietario
-
Moxa OnCell G3101-HSPA Series Manuale utente
-
Woodward easYgen-1800 Manuale utente
-
-
Siemens Cell Phone C60 Manuale utente
-
Pantech PP4GA-160C Manuale utente
-
-
NGM Soap Evo Manuale del proprietario
-
ACI Farfisa PL11G Manuale del proprietario
-