EnGenius ENH500 Manuale utente

WIRELESS ACCESS POINT / CLIENT BRIDGE

Model: ENH500

User Manual

Version: 1.0

Table of Contents

1 PRODUCT OVERVIEW ................................................ ......................................................................................................... 6

1.1 FEATURES.......................................................................................................................................................................... 6

1.2 BENEFITS .......................................................................................................................................................................... 8

1.3 PACKAGE CONTENTS ......................................................................................................................................................... 9

1.4 SYSTEM REQUIREMENT...................................................................................................................................................... 9

1.5 HARDWARE OVERVIEW ..................................................................................................................................................... 9

1.6 UNDERSTANDING THE ENH500 LEDS ............................................................................................................................ 10

2 INSTALLATION.................................................. ...................................................................................................................11

2.1 PRE-INSTALLATION GUIDELINES........................................................................................................................................11

2.2 INSTALLING THE ENH500................................................................................................................................................11

3 WIRELESS NETWORK MODES ............... ................................................................. ........................................................ 12

3.1 ACCESS POINT MODE ..................................................................................................................................................... 12

3.2 ACCESS POINT WITH WDS FUNCTION MODE.................................................................................................................. 13

3.3 CLIENT BRIDGE MODE .................................................................................................................................................... 14

3.4 WDS BRIDGE MODE ...................................................................................................................................................... 15

3.5 CLIENT ROUTER MODE ................................................................................................................................................... 16

4 CONFIGURING YOUR COMPUTER FOR TCP/IP.......................................................................................................... 18

4.1 CONFIGURING MICROSOFT WINDOWS 7......................................................................................................................... 18

4.2 CONFIGURING MICROSOFT WINDOWS VISTA .................................................................................................................. 20

4.3 CONFIGURING MICROSOFT WINDOWS XP ...................................................................................................................... 21

4.4 CONFIGURING APPLE MAC OS X .................................................................................................................................... 22

4.5 LOGGING INTO THE ENH500.......................................................................................................................................... 23

5 STATUS................................. .................................................................. ............................................................................... 25

5.1 SAVE / LOAD................................................................................................................................................................... 25

5.2 MAIN ............................................................................................................................................................................. 26

5.3 WIRELESS CLIENT LIST..................................................................................................................................................... 27

5.4 SYSTEM LOG................................................................................................................................................................... 27

5.5 CONNECTION STATUS ..................................................................................................................................................... 28

5.6 DHCP CLIENT TABLE ...................................................................................................................................................... 28

6 SYSTEM....................... ............................................................................................................................................... ........... 29

6.1 SWITCHING THE OPERATION MODE................................................................................................................................. 29

7 WIRELESS CONFIGURATION........................................................................................................... ................................ 30

7.1 WIRELESS SETTINGS........................................................................................................................................................ 30

7.1.1 Access Point Mode ....................................................... .................................................................................... 30

7.1.2 Client Bridge Mode ...................................................... .................................................................. .................. 33

7.1.3 WDS Bridge Mode............................................ ................................................................................................ 35

7.1.4 Client Router Mode.......................... ................................................................................................................ 37

7.2 WIRELESS SECURITY SETTINGS......................................................................................................................................... 39

7.2.1 WEP........................................................... .................................................................. ....................................... 39

7.2.2 WPA-PSK........................................................................................................................................................... 40

7.2.3 WPA2-PSK........................................... .............................................................................................................. 41

7.2.4 WPA-PSK Mixed ............................................................................................................................................... 42

7.2.5 WPA ........................................................ .................................................................. ......................... ................ 43

7.2.6 WPA2 ........................................ ................................................................. ........................................................ 44

7.2.7 WPA Mixed.............................................................................. .......................................................................... 45

7.3 WIRELESS ADVANCED SETTINGS...................................................................................................................................... 46

7.4 WIRELESS MAC FILTER ................................................................................................................................................... 48

7.5 WDS LINK SETTINGS ...................................................................................................................................................... 49

8 LAN SETUP............ ............................................................................................................................................................... 50

8.1 IP SETTINGS ................................................................................................................................................................... 50

8.2 SPANNING TREE SETTINGS .............................................................................................................................................. 51

9 ROUTER SETTINGS ............................................................................. ............................................................................. ..52

9.1 WAN SETTINGS.............................................................................................................................................................. 52

9.1.1 Static IP ................................................................ ............................................................................................. 52

9.1.2 DHCP (Dynamic IP) ............................................................ .................................................................. ........... 54

9.1.3 PPPoE (Point-to-Point Protocol over Ethernet) ............................................................................................ 56

9.1.4 PPTP (Point-to-Point Tunneling Protocol) ..... ............................................................................................... 58

9.2 LAN SETTINGS (ROUTER MODE)..................................................................................................................................... 60

9.3 VPN PASS THROUGH...................................................................................................................................................... 61

9.4 PORT FORWARDING ........................................................................................................................................................ 62

9.5 DMZ ............................................................................................................................................................................. 63

10 MANAGEMENT SETTINGS ............................................................... .............................................................................64

10.1 ADMINISTRATION ......................................................................................................................................................... 64

10.2 MANAGEMENT VLAN .................................................................................................................................................. 65

10.3 SNMP SETTINGS.......................................................................................................................................................... 66

10.4 BACKUP/RESTORE SETTINGS ......................................................................................................................................... 67

10.5 FIRMWARE UPGRADE .................................................................................................................................................... 67

10.6 TIME SETTINGS ............................................................................................................................................................. 68

10.7 LOG.............................................................................................................................................................................. 69

10.8 DIAGNOSTICS ............................................................................................................................................................... 70

11 NETWORK CONFIGURATION EXAMPLES....................... ...........................................................................................71

11.1 ACCESS POINT.............................................................................................................................................................. 71

11.2 CLIENT BRIDGE MODE .................................................................................................................................................. 72

11.3 WDS BRIDGE MODE .................................................................................................................................................... 73

11.4 CLIENT ROUTER MODE ................................................................................................................................................. 74

APPENDIX A – TROUBLESHOOTING ................................................................................................ ................................75

A.1 PROBLEM SOLVING......................................................................................................................................................... 75

A.2 CONTACTING TECHNICAL SUPPORT................................................................................................................................. 76

APPENDIX B – SPECIFICATIONS ............................................................................................................. ........................... 77

APPENDIX C – GLOSSARY ........................................................................... ........................................................................ 79

APPENDIX D – STATEMENTS OF CONFORMITY............................................................................................................ 84

D.1 – FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT........................................................................... 84

D.2 – INDUSTRY CANADA STATEMENT ................................................................................................................................... 85

D.3 – EUROPE DECLARATION OF CONFORMITY ...................................................................................................................... 86

About This Document

This document is written by EnGenius Inc. EnGenius Inc. the reserves the right to change this

document without notice and all rights are reserved. This document can only be used for the

configuration of EnGenius products.

This document is to characterize the EnGenius ENH500 Wireless Access Point & Client

Bridge. Please read the document carefully before setting up the ENH500. Any damage which

is caused by inappropriate use will not be covered under the warranty.

Formats

This document uses following symbols to indicate and highlight special messages.

Caution: This symbol represents a vital message and it is critical for the device

or settings.

Note: This symbol represents an important message for the settings.

Tip: This symbol represents an alternative choice that can save time or

resources.

Before you start__________________________________________________

The following equipment is required to setup the ENH500:

1. (1) Computer/Notebook and Internet access.

2. (2) Ethernet cables.

3. (1) EnGenius ENH500.

The equipment listed above is only for configuration of the ENH500, you will

need additional equipment to connect to the Internet and configuration will depend on your

current network infrastructure. Please refer to Chapter 2 for more information.

1 Product Overview

Thank you for using the ENH500. It is a powerful and enhanced business-class product with 4

multi-functions: Access Point, Client Bridge, WDS, and Client Router.

EnGenius’ ENH500 uses the latest wireless standard, 802.11n, which allows for faster wireless

throughput. The ENH500 affords a great advantage to minimize the time and cost which is

required to expand your network. It operates at 5GHz and is also backwards compatible with

802.11a networking equipment.

The ENH500 is easy to install almost anywhere with included proprietary Power over Ethernet

adapter for quick outdoor installation. In addition, the ENH500 can manage power level

control, and it features narrow bandwidth selection, traffic shaping and real-time RSSI

indication. The ENH500 fully supports wireless encryption including Wi-Fi Protected Access

(WPA-PSK/WPA2-PSK), (64/128/152)-bit WEP Encryption, and IEEE 802.1x with RADIUS.

Additionally, the ENH500 is an ideal choice to pair with the ENH500 in a Access Point – Client

Bridge or WDS Bridge – WDS Bridge topology.

The ENH500 utilizes a proprietary PoE adapter. Only use the supplied PoE

adapter. Damage may occur if another PoE adapter is used.

1.1 Features

The following list describes the design and scope of the ENH500 made possible through the

power and flexibility of wireless LANs:

a) Difficult-to-wire environments

There are many situations where wires cannot be laid easily. For example, historic

and older buildings as well as open areas and cross-street architectures make the

installation of LANs either impossible or very expensive.

b) Temporary workgroups

Consider situations in parks, athletic arenas, exhibition centers, disaster-recovery,

temporary offices and construction sites where one wants a temporary WLAN

established and removed at a future date. The ENH500 is easy to place into and

remove from production.

c) The ability to access real-time information

Doctors and nurses, point-of-sale employees, and warehouse workers can access

real-time information while dealing with patients, serving customers, and

processing information.

d) Frequently altered environments

Show rooms, meeting rooms, retail stores, and manufacturing sites are prime

examples where frequently rearranged workplaces are suited for wireless LANs.

e) Wireless extensions of Ethernet networks

Network managers in dynamic environments can minimize the overhead caused by

moves, extensions to networks, and other changes by utilizing wireless LANs.

f) Wired LAN backup

Network managers may implement wireless LANs to provide redundancy for

mission-critical applications which are implemented on wired networks.

g) Training and educational facilities

Training sites at corporations and students at universities use wireless connectivity

to afford access to information, information exchanges, and learning.

Features

High Speed Data Rate

Up to 300 Mbps

Capable of handling heavy data payloads such as HD video

streaming

High Output Power up

to 29 dBm

Extended range and excellent coverage

IEEE 802.11a/n

Compliant

Fully interoperable with IEEE 802.11 a/n compliant devices

Multi-Function Users can use different modes in various environments

Support RSSI

Indicator (CB mode)

Users can select the best signal to connect with AP efficiently

Power-over-Ethernet

Flexible Access Point locations and cost savings (Note: The

ENH500 includes a proprietary PoE adapter.)

Support Multi-SSID

function (4 SSID) in

AP mode

Allow clients to access different networks through a single

access point and assign different policies and functions for each

SSID

WPA2/WPA/ WEP/

IEEE 802.1x support

Full support for all types of current wireless security standards

MAC address filtering

in AP mode

Ensure secure network by enforcing network access control lists

PPPoE/PPTP function

support (AP

Router/CR mode)

Easy to access Internet via ISP service authentication

SNMP Remote

Configuration

Management

Allow administrators to remotely configure or manage the

Access Point.

QoS (WMM) support Enhance user performance and density

1.2 Benefits

Access Point Mode Use this feature to setup the access point’s configuration

information. It supports transmit power and channel adjustments.

Clients can access the network with different regulatory settings

and automatically change to the local regulations.

Client Bridge Mode Use this feature to connect to an Access Point, enabling WAN

sharing.

WDS Mode Use this feature to link multiple APs in a network; All associated

clients from any AP can communicate with each other like in

ad-hoc mode.

Client Router Mode Clients connect wirelessly to an AP and transmit data through AP

to access the Internet.

Multiple SSIDs ENH500 supports up to 4 SSIDs on your access point. The

following options can be set to each SSID:

- Public or private SSID

- Authentication

- VLAN identifier

- RADIUS accounting identifier

- Profile isolation for infrastructure network

VLAN Specify a VLAN number for each SSID to separate the services

among clients.

QoS Use this feature to limit the incoming or outgoing throughput.

Wi-Fi Protected Access Wi-Fi Protect Access is a standard-based interoperable security

enhancement that increases the level of data protection and

access control for existing and future wireless LAN systems. It is

compatible with IEEE 802.11i standard. WPA leverages TKIP and

802.1X for authenticated key management.

1.3 Package Contents

Open the package carefully, and make sure that none of the items listed below are missing.

Do not discard the packing materials; in case of return, the unit must be shipped in its original

packaging.

 (1) Wireless Access Point / Client Bridge (ENH500)

 (1) 24V/1.0A Power Adapter

 (1) PoE Injector (EPE-24R)

 (1) Mounting Kit with Mast-Mount Strap Special Screw Set

 (1) QIG

 (1) CD (User Manual)

Using a power adapter other than the one included with the ENH500 may

cause damage to the device.

1.4 System Requirement

The following conditions are the minimum system requirements.

 A computer with an Ethernet interface and operating under Windows XP, Vista, 7 or

Linux.

 An Internet browser that supports HTTP and JavaScript.

1.5 Hardware Overview

Physical Interface - 1 x 10/100 LAN Port with PoE support

- 1 x 10/100 LAN port

- 1 x Reset button

Maximum Wireless Data rate - 300 Mbps

LEDs status - Power Status

- LAN (10/100Mbps)

- WLAN (Wireless is enabled)

- 3 x Link Quality (Client Bridge mode)

1.6 Understanding the ENH500 LEDs

The rear of the ENH500 has two groups of LEDs. One group, labeled INDICATORS, shows the

status of the device. The second group, LINK QUALITY, shows the strength of the link

between the ENH500 and the network. The following table describes the ENH500 LEDs.

LED Color Mode Status

Power Green OFF= ENH500 is not receiving power.

ON= ENH500 is receiving power.

LAN Green OFF = ENH500 is not connected to the network.

ON = ENH500 is connected to the network, but not sending or

receiving data.

Blink = ENH500 is sending or receiving data.

WLAN Green Access Point

or Client

Bridge

Mode

OFF = ENH500 radio is off and the device is not

sending or receiving data over the wireless LAN.

ON = ENH500 radio is on, and the device is not

sending or receiving data over the wireless LAN.

Blink = ENH500 radio is on, and the device is

sending or receiving data over the wireless LAN.

Link Quality See Status column Access Point

or Client

Bridge

Mode

Shows the strength of the link between the

ENH500 and the network.

G = good quality (green).

Y = medium quality (yellow).

R = poor or no link (red).

2 Installation

This chapter describes how to install the ENH500.

Only experienced installation professionals who are familiar with local building and

safety codes and, wherever applicable, are licensed by the appropriate government regulatory

authorities should install the ENH500.

2.1 Pre-installation Guidelines

Select the optimal locations for the equipment using the following guidelines:

- The ENH500 should be mounted on a 1"- 4" pole. Its location should enable easy access

to the unit and its connectors for installation and testing.

- The higher the placement of the antenna, the better the achievable link quality.

- The antenna should be installed to provide a direct or near line of sight link with the base

station antenna. The antenna should be aligned to face the general direction of the base

station.

2.2 Installing the ENH500

To install the ENH500, use the following procedure to mount the device on a pole and refer to

the figure below.

1. The bottom of the ENH500 is a removable cover. Grab the cover and push down

slightly while pulling it backward to remove the cover.

2. Insert a standard Ethernet cable into the RJ-45 port labeled MAIN LAN.

3. Slide the cover back to seal the bottom of the ENH500.

4. Remove the power cord and PoE injector from the box and plug the power cord

into the DC port of the PoE injector.

Only use the power adapter supplied with the ENH500. Using a different power

adapter might damage the ENH500.

5. Plug the other side of the Ethernet cable in Step 3 into the PoE port of the PoE

injector. When you finish Step 5, the installation will resemble the following picture.

6. Turn over the ENH500. Then insert the mast strap through the middle hole of the

ENH500. Use a screwdriver to unlock the pole-mounting ring putting it through the

ENH500.

7. Mount the ENH500 securely to the pole by locking the strap tightly.

This completes the installation procedure.

3 Wireless Network Modes

3.1 Access Point Mode

In the Access Point Mode, the ENH500 functions like a central connection for any stations or

clients that support the IEEE 802.11a/n standards. Stations and clients must utilize the same

SSID and Security Password to associate while within range. The most suitable topology for

this mode is to have one ENH500 as an AP and the second one as a Client-Bridge – when

necessary a third Client-Bridge can be place within the directional antenna’s path. One

advantage of using the ENH500 to create point-to-point outdoor wireless links is when the

environment is prone to radio interference on 2.4GHz band. Running the network on 5GHz

can avoid the interference, thus providing higher stability to the network.

3.2 Access Point with WDS Function Mode

The ENH500 also supports WDS functionality while in Access Point Mode. Simply configure

other Access Points and the associated MAC addresses in order to enlarge the wireless area by

enabling WDS Link Settings. WDS functionality can support up to 8 different AP MAC

addresses. Please note that this mode is rarely used due to the nature of directional antennae.

Consequently, the wireless clients need to be located in the path of the ENH500’s directional

antenna and be within in the range to send signal back to the ENH500.

Not every Access Point supports WDS in Access Point Mode. It is

recommended to use ENH500s if you would like to utilize this functionality.

3.3 Client Bridge Mode

In the Client Bridge Mode, the ENH500 functions like a wireless client, connecting to an

Access Point wirelessly and enabling Internet connectivity wherever you want. Use Site Survey

function to scan all of the Access Points within range and configure the SSID and Security

Password to associate with it. With Client Bridge Mode, the ENH500 works as long range

5GHz wireless-Ethernet Bridge in order to provide a 5GHZ link between the access point and

networked clients.

3.4 WDS Bridge Mode

In the WDS Bridge Mode, the ENH500 can wirelessly connect different local area networks by

configuring each device’s MAC address and security settings. The WDS Bridge Mode can

bridge up to four local wired networks together as one logical network. Every computer on

this logical network can see each other, sharing files as if they are in the same location. With

600mW output power and MIMO antenna technology, the connection distance can extend

beyond 1000 feet with good performance, assuming the antenna are within line of sight. The

WDS bridge network is a MAC-based network that provides transparent bridging.

WDS Bridge Mode is unlike Access Point Mode. APs linked by WDS are

using the same wireless channel, and connecting excessive numbers of APs on the same

channel may result in lower throughput. Please be aware to avoid loop connections;

otherwise enable the Spanning Tree Function.

3.5 Client Router Mode

In Client Router Mode, the ENH500 provides two functions: 1) acting as a wireless-Ethernet

Bridge in order to relay signal from the access point; 2) acting as an active DHCP server that

allows WLAN clients to share the same wireless network connection. Ideally, have clients

wirelessly connect to an AP/WISP and connect to LANs via Ethernet. Client Router Mode is

different from the AP Router Mode. It is not a common application however useful when

connects to WISP AP.

4 Configuring Your Computer for TCP/IP

This chapter describes how to configure the TCP/IP settings on a computer that will be used

to configure the ENH500. Because the default operating mode is Client Bridge, an IP address

will not be assigned to the computer/notebook. Therefore, follow the steps below to assign

an IP address to a client’s Ethernet adapter.

4.1 Configuring Microsoft Windows 7

Use the following procedure to configure a computer running Microsoft Windows 7.

1. In the Start menu search box, type: ncpa.cpl

2. When the Network Connections List appears, right-click the Local Area Connection icon

and click Properties.

3. In the Networking tab, click Internet Protocol Version 4 (TCP/IPv4), and then click

Properties.

4. In the properties dialog box, click Use the following IP address: to configure your

computer for Static TCP/IP. Enter an IP address (i.e. 192.168.1.10), the subnet mask of the

ENH500, and the default gateway which is the ENH500’s IP address, 192.168.1.1. Note: the

subnet mask must match that of the ENH500 and the IP address must be on that subnet.

5. Click the OK button to save your changes and close the dialog box.

6. Click the OK button again to save your changes.

4.2 Configuring Microsoft Windows Vista

Use the following procedure to configure a computer running Microsoft Windows Vista with

the default Windows interface.

1. On the Windows taskbar, click Start, click Control Panel, and then select the Network

and Internet icon.

2. Click View Network Status and tasks and then click Manage Networks Connections.

3. Right-click the Local Area Connection icon and click Properties.

4. Click Continue. The Local Area Connection Properties dialog box appears.

5. In the Local Area Connection Properties dialog box, verify that Internet Protocol

(TCP/IPv4) is checked. Then select Internet Protocol (TCP/IPv4) and click the Properties

button. The Internet Protocol Version 4 Properties dialog box appears.

La pagina sta caricando ...

EnGenius ENH500 Manuale utente

EnGenius ENH500 Manuale utente

in altre lingue

Documenti correlati

Altri documenti