AirLive WL-5470POE Manuale utente

W

L-5470POE

54Mbps PoE Multi-Function

Wireless AP

User’s Manual

Clause Description

■ EN 300 328 v1.7.1

Electromagnetic compatibility and Radio spectrum Matters (ERM);

(2006-10) Wideband transmission equipment operating in the 2.4GHz ISM band

And using spread spectrum modulation techniques; Part 1：technical

Characteristics and test conditions Part2：Harmonized EN covering

Essential requirements under article 3.2 of the R&TTE Directive

■ EN 301 489-1 V1.6.1 Electromagnetic compatibility and Radio spectrum Matters (ERM);

(2005-09) Electromagnetic compatibility(EMC) standard for radio equipment and

■ EN 301 489-17 V1.2.1 Services; Part 17：Specific conditions for wideband data and

(2002-08) HIPERLAN equipmen

t

■ EN 50371:2002 Generic standard to demonstrate the compliance of low power

Electronic and electrical apparatus with the basic restrictions related

to human exposure to electromagnetic field (10MHz – 300GHz)

-General public

■ EN 50392:2004 Generic standard to demonstrate the compliance of electronic and

electrical apparatus with the basic restrictions related to human

exposure to electromagnetic fields (0Hz – 300GHz )

■ EN 60950-1:2001+A1

1

Safety for information technology equipment including electrical

:2004

b

usiness equipment

■ CE markin

g

Signature ：

Name ： Albert Yeh

Position/ Title： Vice President

(Stamp) Date： 2008/10/15

AirLive WL-5470POE

is in conformity with

In accordance with 89/336/EC Directive and 1999/5 EC-R & TTE Directive

Manufacturer/Importer

Hsin-Tien Cit

y

, Taipei Count

y

, Taiwan

Declare that the product

802.11b/g Multi-Function Wireless Access Point

Declaration of Conformity

We, Manufacturer/Importer

OvisLink Corp.

5F., NO.6, Lane 130, Min-Chuan Rd.,

AirLive WL-5470POE CE Declaration Statement

Country Declaration Country Declaration

cs

Česky [Czech]

OvisLink Corp. tímto prohlašuje, že tento AirLive

WL-5470POE je ve shodě se základními

požadavky a dalšími příslušnými ustanoveními

směrnice 1999/5/ES.

lt

Lietuvių

[Lithuanian]

Šiuo OvisLink Corp. deklaruoja, kad šis AirLive

WL-5470POE atitinka esminius reikalavimus ir kitas

1999/5/EB Direktyvos nuostatas.

da

Dansk [Danish]

Undertegnede OvisLink Corp. erklærer herved, at

følgende udstyr AirLive WL-5470POE overholder

de væsentlige krav og øvrige relevante krav i

direktiv 1999/5/EF.

nl

Nederlands [Dutch

Hierbij verklaart OvisLink Corp. dat het toestel AirLive

WL-5470POE in overeenstemming is met de

essentiële eisen en de andere relevante bepalingen

van richtlijn 1999/5/EG.

de

Deutsch

[German]

Hiermit erklärt OvisLink Corp., dass sich das

Gerät AirLive WL-5470POE in Übereinstimmung

mit den grundlegenden Anforderungen und den

übrigen einschlägigen Bestimmungen der

Richtlinie 1999/5/EG befindet.

mt

Malti [Maltese]

Hawnhekk, OvisLink Corp, jiddikjara li dan AirLive

WL-5470POE jikkonforma mal-ħtiġijiet essenzjali u

ma provvedimenti oħrajn relevanti li hemm

fid-Dirrettiva 1999/5/EC.

et

Eesti [Estonian]

Käesolevaga kinnitab OvisLink Corp. seadme

AirLive WL-5470POE vastavust direktiivi

1999/5/EÜ põhinõuetele ja nimetatud direktiivist

tulenevatele teistele asjakohastele sätetele.

hu

Magyar

[Hungarian]

Az OvisLink Corporation kijelenti, hogy az AirLive

WL-5470POE megfelel az 1999/05/CE irányelv

alapvető követelményeinek és egyéb vonatkozó

rendelkezéseinek.

en

English

Hereby, OvisLink Corp., declares that this AirLive

WL-5470POE is in compliance with the essential

requirements and other relevant provisions of

Directive 1999/5/EC.

pl

Polski [Polish]

Niniejszym OvisLink Corp oświadcza, że AirLive

WL-5470POE jest zgodny z zasadniczymi wymogami

oraz pozostałymi stosownymi postanowieniami

Dyrektywy 1999/5/EC.

es

Español

[Spanish]

Por medio de la presente OvisLink Corp. declara

que el AirLive WL-5470POE cumple con los

requisitos esenciales y cualesquiera otras

disposiciones aplicables o exigibles de la

Directiva 1999/5/CE.

pt

Português

[Portuguese]

OvisLink Corp declara que este AirLive WL-5470POE

está conforme com os requisitos essenciais e outras

disposições da Directiva 1999/5/CE.

el

Ελληνική [Greek]

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ OvisLink Corp. ΔΗΛΩΝΕΙ

ΟΤΙ AirLive WL-5470POE ΣΥΜΜΟΡΦΩΝΕΤΑΙ

ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ

ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ

1999/5/ΕΚ.

sl

Slovensko

[Slovenian]

OvisLink Corp izjavlja, da je ta AirLive WL-5470POE v

skladu z bistvenimi zahtevami in ostalimi relevantnimi

določili direktive 1999/5/ES.

fr

Français [French]

Par la présente OvisLink Corp. déclare que

l'appareil AirLive WL-5470POE est conforme aux

exigences essentielles et aux autres dispositions

pertinentes de la directive 1999/5/CE

sk

Slovensky [Slovak]

OvisLink Corp týmto vyhlasuje, že AirLive

WL-5470POE spĺňa základné požiadavky a všetky

príslušné ustanovenia Smernice 1999/5/ES.

it

Italiano [Italian]

Con la presente OvisLink Corp. dichiara che

questo AirLive WL-5470POE è conforme ai

requisiti essenziali ed alle altre disposizioni

pertinenti stabilite dalla direttiva 1999/5/CE.

fi

Suomi [Finnish]

OvisLink Corp vakuuttaa täten että AirLive

WL-5470POE tyyppinen laite on direktiivin 1999

/

5/EY

oleellisten vaatimusten ja sitä koskevien direktiivin

muiden ehtojen mukainen

lv

Latviski [Latvian]

Ar šo OvisLink Corp. deklarē, ka AirLive

WL-5470POE atbilst Direktīvas 1999/5/EK

būtiskajām prasībām un citiem ar to saistītajiem

noteikumiem.

Íslenska [Icelandic]

Hér með lýsir OvisLink Corp yfir því að AirLive

WL-5470POE er í samræmi við grunnkröfur og aðrar

kröfur, sem gerðar eru í tilskipun 1999/5/EC.

sv

Svenska

[Swedish]

Härmed intygar OvisLink Corp. att denna AirLive

WL-5470POE står I överensstämmelse med de

väsentliga egenskapskrav och övriga relevanta

bestämmelser som framgår av direktiv

1999/5/EG.

no

Norsk [Norwegian]

OvisLink Corp erklærer herved at utstyret AirLive

WL-5470POE er i samsvar med de grunnleggende

krav og øvrige relevante krav i direktiv 1999/5/EF.

A copy of the full CE report can be obtained from the following address:

OvisLink Corp.

5F, No.6 Lane 130,

Min-Chuan Rd, Hsin-Tien City,

Taipei, Taiwan, R.O.C.

This equipment may be used in AT, BE, CY, CZ, DK, EE, FI, FR, DE, GR, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, SK,

SI, ES, SE, GB, IS, LI, NO, CH, BG, RO, TR

WL-5470 POE User’s Manual

1

Regulatory Information

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, (example - use only shielded interface

cables when connecting to computer or peripheral devices) any changes or modifications

not expressly approved by the party responsible for compliance could void the user’s

authority to operate this equipment. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

IMPORTANT NOTE

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance

20cm between the radiator & your body.

This transmitter must not be co-located or operating in conjunction with any other antenna

or transmitter.

Copyright Statement

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in

any form or by any means, whether electronic, mechanical, photocopying, recording or

otherwise without the written consent of OvisLink Corp.

Windows

™

95/98 and Windows

™

2000 are trademarks of Microsoft

®

Corp.

Pentium is trademark of Intel.

All copyright reserved.

WL-5470 POE User’s Manual

2

Table of Contents

1. Introduction...........................................................................................................................4

1.1 Overview.....................................................................................................................4

1.2 Firmware Features .....................................................................................................6

1.3 Installing WL-5470POE..............................................................................................9

1.3.1 Package Content..............................................................................................9

1.3.2 Hardware Presentation ....................................................................................9

1.3.3 Configuration Setups .................................................................................... 10

1.3.4 Hardware Connection ................................................................................... 11

2. Operation Mode ................................................................................................................ 13

2.0 Change Operation Mode......................................................................................... 14

2.1 About the Operation Modes .................................................................................... 14

2.1 About the Operation Modes .................................................................................... 15

2.1.1 Access Point Mode ....................................................................................... 15

2.1.2 Client Mode ................................................................................................... 16

2.1.3 Bridge Mode.................................................................................................. 17

2.1.4 WDS Repeater .............................................................................................. 18

2.1.5 Universal Repeater ....................................................................................... 19

2.1.6 WISP (Client Router) mode .......................................................................... 20

2.1.7 WISP + Universal Repeater mode ............................................................... 21

2.1.8 Gateway (AP + Router)................................................................................. 22

3. Wireless Settings .............................................................................................................. 23

3.1 Access Point Mode Settings.................................................................................... 23

3.2 Client Mode Settings ............................................................................................... 25

3.3 Bridge Mode Settings .............................................................................................. 27

3.4 WDS Repeater Mode Settings................................................................................ 29

3.5 Universal Repeater Mode Settings ......................................................................... 32

3.6 WISP Mode Settings ............................................................................................... 34

3.7 WISP + Universal Mode Settings............................................................................ 38

3.8 Gateway Mode (AP + Router) Settings .................................................................. 42

3.9 Wireless Security..................................................................................................... 47

3.10 Advanced Wireless Settings ................................................................................. 51

3.11 Access Control....................................................................................................... 53

3.12 QoS Traffic Control................................................................................................ 54

4. System Management........................................................................................................ 62

4.1 LAN Interface Setup ................................................................................................ 62

4.2 Upgrade Firmware................................................................................................... 64

4.3 Save / Reload Settings............................................................................................ 65

4.4 Change Password ................................................................................................... 66

4.5 Enable System Log ................................................................................................. 67

WL-5470 POE User’s Manual

3

4.6 NTP Settings............................................................................................................ 68

5. System Status ................................................................................................................... 69

5.1 System Data ............................................................................................................ 69

5.2 Statistics................................................................................................................... 70

Active Clients ................................................................................................................. 70

6 System Recovery............................................................................................................... 71

7. Specification ...................................................................................................................... 72

Appendix Command Line Management............................................................................... 74

WL-5470 POE User’s Manual

4

1. Introduction

1.1 Overview

AirLive WL-5470POE is an IEEE802.11b/g compliant 11 Mbps & 54 Mbps Ethernet Wireless Access Point.

The Wireless Access Point is equipped with two 10/100 M Auto-sensing Ethernet ports for connecting to LAN

and also for cascading to next Wireless Access Point.

AirLive WL-5470POE provides 64/128bit WEP encryption, WPA and IEEE802.1x which ensures a high level

of security to protect users’ data and privacy. The MAC Address filter prevents the unauthorized MAC

Addresses from accessing your Wireless LAN. Your network security is therefore double assured.

The web-based management utility is provided for easy configuration that your wireless network connection is

ensured to be always solid and hassle free.

Wireless Client Isolation

The WL-5470POE features the new Wireless Client Isolation function previous available only in more

expensive APs. When you enable this function, the wireless clients will not be able to see each other.

Therefore, it is an important function for office and Hotspot operator to protect the security between different

wireless users.

ACK Timeout and TX Power Regulation

The WL-5470POE features ACK timeout function to let you adjust the timeout value for long distance

operation. In addition, 5-level TX power adjustment let you match different antennas for law compliance. The

ability to set lower TX output power is also crucial if you want to match the AP with external power amplifier.

Extended Security Features

The WL-5470POE supports WEP, WPA and WPA2 security functions. In addition, WPA enterprise for 802.1x

authenticator are featured for AP and WDS mode. The combination of Encryption, Hide SSID and Access

Control ensures your wireless network is completely secured from intruder.

Whether it's for office or home environment, the AirLive 802.11g family bring you the maximum performance

and security for today's high speed wireless network.

WL-5470 POE User’s Manual

5

Application

Example 1

Example 2

WL-5470 POE User’s Manual

6

1.2 Firmware Features

AirLive Wireless AP Firmware Features

The Most Powerful AP Firmware Ever!

WL-5470POE

As the leading global WISP solution provider, AirLive understands the application environments of WISP

operators. As a result, we are constantly upgrading our AP’s firmware to meet the changing demand of

WISP operators. The firmware adds high end features not commonly found in the AP of this class. The

AirLive multi-function Access Points not only work for long distance application, they work much better than

the competitions.

8 Wireless Operation Modes

The AirLive WL-5470POE can operate

in 8 different wireless modes. It can

work as a Wireless Router, AP, Client,

Repeater, Bridge, and much more.

Whether it is for home, office, or WISP;

the AirLive AP has a solution for you.

Up to 400mW of Output Power*

AirLive’s high quality hardware let the

AP expand its RF output power up to

26dBm using South American

firmware. That’s 4 times the output

power of regular AP! It means much

greater distance and coverage.

* For South America only. Not available for other regions.

WL-5470 POE User’s Manual

7

Traffic Control QoS Function

Traffic Control is a great tool to control the bandwidth

of the WISP subscribers. Therefore, the WISP

operators can offer different class of connection

speeds for different subscription fees - just like the

ADSL service! The AirLive advance Traffic Control

firmware can control the bandwidth by Interface or

IP/MAC.

Dynamic Signal Survey Function for Antenna Alignment

Having trouble align your antenna correctly to the other

outdoor AP? The AirLive Wireless Signal Survey

function tells you the receiving signal strength

dynamically as your antenna turns. It automatically

refreshes itself in the process, therefore, making antenna

alignment much simpler than before.

Wireless Site Survey Connection Wizard

During a new WISP service installation, the

installer will need to find out which outdoor AP

provide the best signal in the area for connection.

The AirLive wireless site survey function provides

one step setup for this process. First, the site

survey page shows which AP has the strongest the

signal. Then the installer performs antenna

alignment by using the signal survey function. At

last, the installer simply clicks on “connect” button

to establish connection. The site survey is

available even in AP mode, so the installer can

check the channels used by surrounding APs to

avoid interferences.

Telnet Function

Some WISP operators prefer to use CLI

command line for configurations. The firmware

provides full command line feature via Telnet.

WL-5470 POE User’s Manual

8

SSH login

WL-5470POE provides SSH secure connection for remote management. The program SSH (Secure Shell) is

a secure replacement for telnet. It provides an encrypted channel for logging into WL-5420POE over a

network, executing commands on WL-5470POE from your workstation. SSH provides strong host-to-host and

user authentication as well as secure encrypted communications over an insecure Internet.

Wireless Client Isolation

AirLive firmware’s Client Isolation function protects the

security and privacy of each individual subscriber. Therefore,

subscriber does not need to worry about hacker attacks in the

same wireless network.

Emergency Recovery

How many times your machine crashed and lost access

completely?

The AirLive’s Emergency web server function means you can

recover your AP even during if the machine failed during a

firmware upgrade. This greatly reduces the service loading

for WISP operators.

Power over Ethernet

For applications that require user to put a network device (such as AP)

in a place where there is no electrical outlet available, the Power over

Ethernet is the best solution. Power over Ethernet allows both data

and electricity to be transmitted over a Cat.5 UTP/STP cable at up to

100 meter of distance. This allows electronic devices to be placed in

the outdoor or difficult to reach places, while utilizing the power

source and the Ethernet network indoor.

WL-5470 POE User’s Manual

9

1.3 Installing WL-5470POE

This section describes the installation procedure for the WL-5470POE. It starts with a summary of the content

of the package you have purchased, followed by steps of how to power up and connect the WL-5470POE.

Finally, this section explains how to configure a Windows PC to communicate with the WL-5470POE.

1.3.1 Package Content

The WL-5470POE package contains the following items:

9 One WL-5470POE main unit

9 One 12V DC power adapter

9 Indoor detachable Omni Antenna x 1

9 One CD of the WL-5470POE

9 Quick Start Guide

1.3.2 Hardware Presentation

LED # Function Color Status Description

Power Power

indication

Green Solid Power is being applied to this product.

Status Firmware

executions

indicator

Green On and Off Turns solid green when the device is booting, after

boot successfully, the light turn off.

Solid Turns solid green when connected and associated to

at least a client station.

Link/Act LAN port

activity

Green

Blinking Receiving/Sending data

WEP/WPA Encryption

Status

Green Solid Turns solid orange when wireless security is

enabled.

MAC Ctrl MAC Ctril

Status

Green Solid Turns solid light when MAC Control is enabled.

Bridge /

Repeater

Bridge

Repeater

indicator

Green Solid Turn solid light when Bridge or Repeater is enabled.

LAN 1

LAN 2

Link activity Green Blinking An active station is connected to the corresponding

LAN port.

Table 1: LED Indicators

WL-5470 POE User’s Manual

10

Item # Function Description

A Power Adaptor 12V 1A power supply adaptor delivered with product.

B 1/PoE/WAN 802.3af PoE LAN port or WAN port(Gateway Mode only)

C LAN port 2 LAN port

D (Factory) Reset

Press over 3 seconds to reboot this device.

Press for over 10 seconds to restore factory settings.

Performing the Factory Reset will erase all previously entered device

settings.

Table 2: Connection Ports

1.3.3 Configuration Setups

The factory default settings of WL-5470POE are as following:

Settings Default Value

Device Name

WL-5470POE

Radio

802.11b/g

SSID

airlive

Channel

11

WEP

Disabled

IP Address

192.168.100.252

DHCP Server

¾ In AP, Client, Bridge, WDS Repeater and Universal Repeater mode, the

default DHCP Server is disabled, please set your PC's IP to the same

subnet as the AP to access the AP.

¾ In WISP, WISP + Universal Repeater and Gateway mode, the default

DHCP server is enabled. Please restart your PC to renew the IP address.

DHCP IP Range

192.168.100.100 ~ 192.168.100.200

Table 3: Default Setting

○

A

○

B

○

C

○

D

WL-5470 POE User’s Manual

11

1.3.4 Hardware Connection

Note: Before you starting hardware connection, you are advised to find an appropriate location to place the

Access Point. Usually, the best place for the Access Point is at the center of your wireless network, with line of

straight to all your wireless stations. Also, remember to adjust the antenna; usually the higher the antenna is

placed; the better will be the performance.

1. Connect to your local area network: connect an Ethernet cable to one of the Ethernet port (LAN1 or

LAN2) of this Wireless Access Point, and the other end to a hub, switch, router, or another wireless access

point.

2. Power on the device: connect the included AC power adapter to the Wireless Access Point’s power port

and the other end to a wall outlet.

Note: If you want to use PoE, please note that the PoE port is in port 1 and it is compatible with 802.3af

standard (48VDC).

802.3af Power over Ethernet port

WL-5470 POE User’s Manual

12

．Check the LED:

The Power and LAN # LED should be ON. LAN# LED will even blink if there is traffic.

The Link/Act LED will be on in static when associated with a station and blink whenever this AP receives data

packets in the air.

If the Status LED glows after self-test, it means the Wireless Access Point fails on self test. Please ask your

dealer for technical support.

1 Please make sure your computer IP is in the same subnet as the AP (i.e. 192.168.100.x).

2 Please make sure your computer has wireless network adapter installed.

3 Open the web browser and enter http://192.168.100.252/.

WL-5470 POE User’s Manual

13

2. Operation Mode

The WL-5470POE device provides all 8 modes of wireless operational applications with:

Mode Radio LAN 1 LAN 2

AP AP LAN LAN

Client Client LAN LAN

Bridge WDS LAN LAN

WDS Repeater WDS + AP LAN LAN

Universal Repeater AP + Client LAN LAN

WISP Client Router LAN LAN

WISP + Universal

Repeater

Client Router + AP LAN

LAN

Gateway AP+ Router WAN LAN

WL-5470 POE User’s Manual

14

2.0 Change Operation Mode

WL-5470POE is default in AP mode. If the mode had been changed, click the “Mode” button to change back.

To change operation Mode:

1. Click on “Mode“

2. Select Operation Mode in the main page

3. Reboot device

4. Click Setup for detail configuration

Select Operation

Mode and reboot

the system

After reboot, click

“Setup” for detail

configuration

WL-5470 POE User’s Manual

15

2.1 About the Operation Modes

This device provides four operational applications with Access Point, Bridge, Client (Ad-hoc) and Client

(Infrastructure) modes, which are mutually exclusive.

This device is shipped with configuration that is functional right out of the box. If you want to change the

settings in order to perform more advanced configuration or even change the mode of operation, you can use

the web-based utility provided by the manufacturer as described in the following sections.

2.1.1 Access Point Mode

When acting as an access point, this device connects all the stations (PC/notebook with wireless network

adapter) to a wired network. All stations can have the Internet access if only the Access Point has the Internet

connection.

See the sample application below.

To set the operation mode to Access Point, please go to “Mode” field and select the “AP” mode.

WL-5470 POE User’s Manual

16

2.1.2 Client Mode

If set to Client (Infrastructure) mode, this device can work like a wireless station when it’s connected to a

computer so that the computer can send packets from wired end to wireless interface.

Refer to the illustration below. This station (AP1 plus the connected computer 1) can associate to another

Access Point (AP2), and then can have the Internet access if the other Access Point (AP2) has the Internet

connection.

To set the operation mode to Client (Infrastructure), please go to “Mode”field and select the “Client” mode.

WL-5470 POE User’s Manual

17

2.1.3 Bridge Mode

The WDS (Wireless Distributed System) function let this access point acts as a wireless LAN access point

and repeater at the same time. Users can use this feature to build up a large wireless network in a large space

like airports, hotels and schools …etc. This feature is also useful when users want to bridge networks

between buildings where it is impossible to deploy network cable connections between these buildings.

To set the operation mode to Client (Infrastructure), please go to “Mode” field and select the “Bridge” mode.

La pagina sta caricando ...

AirLive WL-5470POE Manuale utente

AirLive WL-5470POE Manuale utente

in altre lingue

Documenti correlati

Altri documenti