ZyXEL WAP6804 Guida utente

User’s Guide

Default Login Details

WAP6804

Dual-band AC2100 Gigabit Wireless Bridge

Web Address http://zyxelsetup (Windows)

http://zyxelsetup.local (Mac)

LAN IP Address http://(DHCP-assigned IP)

OR

http://192.168.1.2 (AP)

http://192.168.1.5 (Repeater)

http://192.168.1.10 (Client)

Password (See the device label)

Version 1.00 Edition 1, 09/2017

WAP6804 User’s Guide

2

IMPORTANT!

READ CAREFULLY BEFORE USE.

KEEP THIS GUIDE FOR FUTURE REFERENCE.

Screenshots and graphics in this book may differ slightly from your product due to differences in your

product firmware or your computer operating system. Every effort has been made to ensure that the

information in this manual is accurate.

Related Documentation

•Quick Start Guide

The Quick Start Guide shows how to connect the WAP6804 and access the Web Configurator.

•More Information

Go to support.zyxel.com to find other information on the WAP6804

.

WAP6804 User’s Guide

3

Document Conventions

Warnings and Notes

These are how warnings and notes are shown in this guide.

Warnings tell you about things that could harm you or your device.

Note: Notes tell you other important information (for example, other things you may need to

configure or helpful tips) or recommendations.

Syntax Conventions

• The WAP6804 may be referred to as the “WAP” in this guide.

• Product labels, screen names, field labels and field choices are all in bold font.

• A right angle bracket ( > ) within a screen name denotes a mouse click. For example, Configuration >

Network > IP Setting means you first click Configuration in the navigation panel, then the Network sub

menu and finally the IP Setting tab to get to that screen.

Icons Used in Figures

Figures in this guide may use the following generic icons. The WAP6804 icon is not an exact

representation of your device.

WAP6804 Router Switch Internet

Server Desktop Laptop

Contents Overview

WAP3205 v3 User’s Guide

4

Contents Overview

User’s Guide ........................................................................................................................................9

Introduction ........................................................................................................................................... 10

The Web Configurator ......................................................................................................................... 15

Modes .................................................................................................................................................... 22

Easy Mode ............................................................................................................................................. 24

Access Point Mode .............................................................................................................................. 28

Repeater Mode .................................................................................................................................... 33

Client Mode .......................................................................................................................................... 39

Tutorials .................................................................................................................................................. 43

Technical Reference ........................................................................................................................49

Monitor ................................................................................................................................................... 50

Network ................................................................................................................................................. 57

Wireless LAN .......................................................................................................................................... 60

AP Connection ..................................................................................................................................... 69

Maintenance ........................................................................................................................................ 74

Troubleshooting .................................................................................................................................... 81

Table of Contents

WAP3205 v3 User’s Guide

5

Table of Contents

Document Conventions ......................................................................................................................3

Contents Overview .............................................................................................................................4

Table of Contents.................................................................................................................................5

Part I: User’s Guide............................................................................................9

Chapter 1

Introduction ........................................................................................................................................10

1.1 Overview ......................................................................................................................................... 10

1.2 Securing the WAP6804 ................................................................................................................... 10

1.3 Front Panel and LEDs ...................................................................................................................... 11

1.4 Rear Panel ....................................................................................................................................... 12

1.5 The WPS Button ............................................................................................................................... 13

1.5.1 Using the WPS Button ............................................................................................................ 14

1.6 The RESET Button ............................................................................................................................. 14

1.6.1 Using the RESET Button .......................................................................................................... 14

Chapter 2

The Web Configurator........................................................................................................................15

2.1 Overview ......................................................................................................................................... 15

2.2 Accessing the Web Configurator ................................................................................................. 15

2.3 Preparing your Computer to Access the Web Configurator .................................................... 16

2.3.1 Static IP Configuration in Microsoft Windows .................................................................... 17

2.3.2 Static IP Configuration in MAC OS X ................................................................................... 19

Chapter 3

Modes .................................................................................................................................................22

3.1 Overview ......................................................................................................................................... 22

3.1.1 Web Configurator Modes .................................................................................................... 22

3.1.2 Device Operating Modes .................................................................................................... 22

3.1.3 Changing Operating Mode ................................................................................................ 23

Chapter 4

Easy Mode..........................................................................................................................................24

4.1 Overview ......................................................................................................................................... 24

4.2 What You Can Do .......................................................................................................................... 25

Table of Contents

WAP3205 v3 User’s Guide

6

4.3 Navigation Panel ............................................................................................................................ 25

4.4 Network Map .................................................................................................................................. 26

4.5 Status Screen in Easy Mode .......................................................................................................... 26

Chapter 5

Access Point Mode............................................................................................................................28

5.1 Overview ......................................................................................................................................... 28

5.1.1 What You Can Do ................................................................................................................. 28

5.2 Setting your WAP6804 to AP Mode .............................................................................................. 28

5.2.1 Status Screen (AP Mode) ..................................................................................................... 29

5.2.2 AP Navigation Panel ............................................................................................................. 31

Chapter 6

Repeater Mode..................................................................................................................................33

6.1 Overview ......................................................................................................................................... 33

6.1.1 What You Can Do ................................................................................................................. 33

6.2 Setting your WAP6804 to Repeater Mode ................................................................................... 33

6.2.1 Status Screen (Repeater Mode) ......................................................................................... 34

6.2.2 Repeater Navigation Panel ................................................................................................. 37

Chapter 7

Client Mode........................................................................................................................................39

7.1 Overview ......................................................................................................................................... 39

7.1.1 What You Can Do ................................................................................................................. 39

7.2 Setting your WAP6804 to Client Mode ......................................................................................... 39

7.2.1 Status Screen (Client Mode) ................................................................................................ 40

7.2.2 Client Navigation Panel ....................................................................................................... 41

Chapter 8

Tutorials...............................................................................................................................................43

8.1 Overview ......................................................................................................................................... 43

8.2 Connecting to the Internet from an Access Point ..................................................................... 43

8.3 Connecting to the WAP6804’s Wireless Network Using WPS ..................................................... 43

8.3.1 Push Button Configuration (PBC) ........................................................................................ 44

8.3.2 PIN Configuration .................................................................................................................. 45

8.4 Connecting the WAP6804 (in Repeater or Client Mode) to an AP .......................................... 46

8.4.1 Selecting an AP from an Automatically Detected List ..................................................... 47

8.4.2 Selecting an AP by Manually Entering Security Information ............................................ 47

Part II: Technical Reference...........................................................................49

Table of Contents

WAP3205 v3 User’s Guide

7

Chapter 9

Monitor................................................................................................................................................50

9.1 Overview ......................................................................................................................................... 50

9.2 What You Can Do .......................................................................................................................... 50

9.3 Log .................................................................................................................................................... 50

9.4 Wireless Monitor .......................................................................................................................... 51

9.5 WDS Monitor .................................................................................................................................... 54

9.6 MBSS Monitor ................................................................................................................................... 55

9.7 Multicast Monitor ............................................................................................................................ 56

Chapter 10

Network...............................................................................................................................................57

10.1 Overview ....................................................................................................................................... 57

10.2 What You Can Do ........................................................................................................................ 57

10.3 What You Need To Know ............................................................................................................ 57

10.4 Networking Screen ....................................................................................................................... 58

Chapter 11

Wireless LAN .......................................................................................................................................60

11.1 Overview ....................................................................................................................................... 60

11.2 What You Can Do ........................................................................................................................ 61

11.3 What You Should Know ............................................................................................................... 61

11.3.1 Wireless Security Overview ................................................................................................. 61

11.3.2 MAC Address Filter .............................................................................................................. 61

11.3.3 Encryption ............................................................................................................................ 62

11.3.4 WPS ....................................................................................................................................... 62

11.3.5 WDS ....................................................................................................................................... 62

11.4 Basic Wireless Network Screen ................................................................................................... 62

11.5 Advanced Wireless Network Screen ..........................................................................................64

11.6 WPS Screen ................................................................................................................................... 65

11.7 MAC Filter ...................................................................................................................................... 66

11.8 WDS Screen ................................................................................................................................... 67

11.9 MBSS Screen .................................................................................................................................. 68

Chapter 12

AP Connection...................................................................................................................................69

12.1 Overview ....................................................................................................................................... 69

12.2 What You Can Do ........................................................................................................................ 69

12.3 Basic/Station Screen .................................................................................................................... 69

12.4 Advance AP Connection Screen ............................................................................................... 70

12.5 AP List Screen ................................................................................................................................ 71

12.6 WPS Screen ................................................................................................................................... 73

Table of Contents

WAP3205 v3 User’s Guide

8

Chapter 13

Maintenance......................................................................................................................................74

13.1 Overview ....................................................................................................................................... 74

13.2 What You Can Do ........................................................................................................................ 74

13.3 Password Screen .......................................................................................................................... 74

13.4 Time Screen ................................................................................................................................... 75

13.5 Firmware Upgrade Screen .......................................................................................................... 76

13.6 Telnet Screen ................................................................................................................................ 77

13.7 Restore Screen .............................................................................................................................. 78

13.7.1 Backup Configuration ........................................................................................................ 78

13.7.2 Restore Configuration ........................................................................................................ 79

13.7.3 Back to Factory Defaults .................................................................................................... 79

13.7.4 Restore but retain IP settings .............................................................................................. 79

13.8 Restart Screen ............................................................................................................................... 80

Chapter 14

Troubleshooting..................................................................................................................................81

14.1 Power, Hardware Connections, and LEDs ................................................................................. 81

14.2 WAP6804 Access and Login ........................................................................................................ 82

14.3 Internet Access ............................................................................................................................. 83

14.4 Resetting the WAP6804 to Its Factory Defaults ......................................................................... 84

14.5 Wireless Problems .......................................................................................................................... 84

Appendix A Wireless LANs ................................................................................................................ 85

Appendix B Customer Support ........................................................................................................ 98

Appendix C Legal Information ...................................................................................................... 104

Index.................................................................................................................................................112

9

PART I

User’s Guide

WAP6804 User’s Guide

10

CHAPTER 1

Introduction

1.1 Overview

The WAP6804 extends the range of your existing wired network without additional wiring, providing easy

network access to mobile users. The WAP6804 is able to function in both 2.4GHz and 5GHz networks at

the same time.

You can set up the WAP6804 with other IEEE 802.11a/b/g/n/ac/an compatible devices in one of the

following device modes:

• Access Point

•Repeater

• Client

If you connect the WAP6804 to a Zyxel WiFi router that supports Multy Pro, you can set up a Multy Pro

WiFi system. See the Quick Start Guide for more information.

Use a (supported) web browser to manage the WAP6804. Menus slightly vary according to which mode

you’re using. See Chapter 3 on page 22 for more information on these modes.

1.2 Securing the WAP6804

Do the following things regularly to make the WAP6804 more secure and to manage the WAP6804 more

effectively.

• Change the password. Use a password that’s not easy to guess and that consists of different types of

characters, such as numbers and letters.

• Write down the password and put it in a safe place.

Chapter 1 Introduction

WAP6804 User’s Guide

11

• Back up the configuration (and make sure you know how to restore it). Restoring an earlier working

configuration may be useful if the device becomes unstable or even crashes. If you forget your

password, you will have to reset the WAP6804 to its factory default settings. If you backed up an

earlier configuration file, you would not have to totally re-configure the WAP6804. You could simply

restore your last configuration.

1.3 Front Panel and LEDs

The following figure is the front panel of the WAP6804. Use the LEDs to determine if the WAP6804 is

behaving normally or if there are some problems on your network.

Figure 1 Front Panel

Chapter 1 Introduction

WAP6804 User’s Guide

12

The following table describes the LEDs .

1.4 Rear Panel

The following figure is the rear panel of the WAP6804. Use the CL/RP/AP switch to change the WAP6804’s

operating mode. See Section 3.1.2 on page 22 for more information.

Table 1 Front Panel LEDs

LED COLOR STATUS DESCRIPTION

WPS Green On WPS is enabled or the WPS process completed successfully.

Blinking The WAP6804 is negotiating a WPS connection with a wireless client.

Red On The WPS process fails.

Off WPS is disabled.

Mode Green On The WAP6804 is working in AP Mode.

Blinking The WAP6804 is working in Repeater Mode.

Amber On The WAP6804 is working in Client Mode.

Off The WAP6804 has no activity.

Link Quality Green On In AP mode, the LED is always on when the WAP6804 is set up

successfully in a Multy Pro WiFi system.

In Client or Repeater mode, the WAP6804 is connecting to an AP and

the RSSI (Received Signal Strength Indicator) value is between -50 and

-78.

Blinking In AP mode, the WAP6804 is connected to a regular router, or the

WAP6804 is connecting to a Multy Pro WiFi router but not configured.

Amber On In Client or Repeater mode, the WAP6804 is connecting to an AP and

the RSSI value exceeds the maximum threshold (-50).

Red On In Client or Repeater mode, the WAP6804 is connecting to an AP and

the RSSI value is below the minimum threshold (-78).

Blinking The WAP6804 has no wireless connection.

WLAN 5G/

2.4G

Green On The wireless interface of the WAP6804 is ready, but it is not sending/

receiving data through the wireless LAN.

Blinking The WAP6804 is sending/receiving data through the wireless LAN.

Off The wireless interface of the WAP6804 is not ready or has failed.

The 2.4 GHz wireless radio of the WAP6804 in client mode is disabled by

default.

LAN1-2 Green On The WAP6804 has a successful 10/1000 Mbps Ethernet connection.

Blinking The WAP6804 is sending or receiving packets to/from an Ethernet

network on this port.

Off There is no connection on this port.

POWER Green On The WAP6804 is receiving power and functioning properly.

Off The WAP6804 is not receiving power.

Chapter 1 Introduction

WAP6804 User’s Guide

13

Figure 2 Rear Panel

1.5 The WPS Button

Your WAP6804 supports WiFi Protected Setup (WPS), which is an easy way to set up a secure wireless

network. WPS is an industry standard specification, defined by the Wi-Fi Alliance.

WPS allows you to quickly set up a wireless network with strong security, without having to configure

security settings manually. Each WPS connection works between two devices. Both devices must

support WPS (check each device’s documentation to make sure).

Depending on the devices you have, you can either press a button (recommended) on the device

itself, or in its configuration utility or enter a PIN (a unique Personal Identification Number that allows one

device to authenticate the other) in each of the two devices. When WPS is activated on a device, it has

two minutes to find another device that also has WPS activated. Then, the two devices connect and set

up a secure network by themselves.

The WPS button is located at the back panel of the WAP6804.

Chapter 1 Introduction

WAP6804 User’s Guide

14

1.5.1 Using the WPS Button

1 Make sure the power LED is on (not blinking).

2 AP mode: Press the WPS button once. Press the WPS button on a WPS-aware client within range of the

WAP6804.

Client mode: Press the WPS button once. Press the WPS button on a WPS-aware AP or wireless router

within range of the WAP6804.

Repeater mode (Uplink): Press the WPS button once. Press the WPS button on a WPS-aware AP or

wireless router within range of the WAP6804.

Repeater mode (Downlink): Press the WPS button twice within three seconds. Press the WPS button on a

WPS-aware client within range of the WAP6804.

Note: You must activate WPS in the WAP6804 and in another wireless device within two

minutes of each other.

Note: With WPS, wireless clients can only connect to the 5GHz or 2.4GHz wireless network using

the first 5GHz or 2.4GHz SSID on the WAP6804 (in AP or repeater mode).

For more information on using WPS, see Section 8.3 on page 43.

1.6 The RESET Button

If you forget your password or IP address, or you cannot access the Web Configurator, you will need to

use the RESET button at the back of the WAP6804 to reload the factory-default configuration file. This

means that you will lose all configurations that you had previously saved, the password will be reset to

the default key on the device label. The WAP6804 will be reset to obtain an IP address from a DHCP

server.

1.6.1 Using the RESET Button

1 Make sure the power LED is on (not blinking).

2 Press the RESET button for one to five seconds to reboot the WAP6804.

3 Press the RESET button for longer than five seconds to set the WAP6804 back to its factory-default

configurations.

WAP6804 User’s Guide

15

CHAPTER 2

The Web Configurator

2.1 Overview

This chapter describes how to access the WAP6804 Web Configurator and provides an overview of its

screens.

The Web Configurator is an HTML-based management interface that allows easy setup and

management of the WAP6804 via Internet browser. Use Internet Explorer 8.0 and later versions, Mozilla

Firefox, Google Chrome or Safari. The recommended screen resolution is 1024 by 768 pixels.

In order to use the Web Configurator you need to allow:

• Web browser pop-up windows from your device.

• JavaScript (enabled by default).

• Java permissions (enabled by default).

Refer to Chapter 13 Troubleshooting to see how to make sure these functions are allowed in Internet

Explorer.

2.2 Accessing the Web Configurator

1 Make sure your WAP6804 hardware is properly connected and prepare your computer or computer

network to connect to the WAP6804 (refer to the Quick Start Guide).

2 Launch your web browser.

3 Type “http://zyxelsetup” (for Windows) or “http://zyxelsetup.local” (for Mac) as the website address to

access any of the modes.

The WAP6804 is a DHCP client by default. Alternatively, check the connected gateway for the

WAP6804's current IP address. Make sure your computer’s IP address is in the same subnet as the

WAP6804’s IP address. Type “http://(DHCP-assigned IP)” as the web address in your web browser.

If the WAP6804 is not connecting to a router or DHCP server, type the WAP6804’s default static IP

address. To access the AP mode, type “http://192.168.1.2”. To access the repeater mode, type “http://

192.168.1.5”. To access the client mode, type “http://192.168.1.10”. Your computer must be in the same

subnet in order to access this website address.You must give it a fixed IP address in the range between

192.168.1.11 and 192.168.1.254 (see Section 2.3 on page 16).

Note: Use the physical CL/RP/AP switch to change device operating mode before you

access its web configurator. See Chapter 3 on page 22 for more information.

4 Type the password on the device label (default) as the password and click Login.

Chapter 2 The Web Configurator

WAP6804 User’s Guide

16

Figure 3 Login Screen

5 You should see a screen asking you to change your password (highly recommended) as shown next.

Type a new password. Click Apply to save your changes. Click Ignore if you do not want to change the

password this time.

Figure 4 Change Password Screen

Right after you log in, the easy mode network map screen is displayed. See Chapter 3 on page 22 for

more information about the easy mode.

2.3 Preparing your Computer to Access the Web

Configurator

This section shows you how to assign a static IP address to your computer.

In order to access the web configurator your computer needs to be in the same subnet as the

WAP6804. Below you will find the steps to set a static IP on both Windows 7 (Section 2.3.1 on page 17)

and MAC OS X 10.11(Section 2.3.2 on page 19) operating systems. For other operating systems go to

Appendix C on page 108.

Chapter 2 The Web Configurator

WAP6804 User’s Guide

17

2.3.1 Static IP Configuration in Microsoft Windows

Follow these steps to change your computer’s IP address in Windows 7 operating system.

1 Click on the Network Icon located in the System Tray of your Task Bar. After you have clicked the

icon a small message window will appear, select Open Network and Sharing Center.

Note: You can also access the Network and Sharing Center by going to the Control Panel in

the Start Menu and clicking on Network and Sharing Center.

2 Once you have accessed the Network and Sharing Center, click on Local Area Connection to access

the adapter’s settings.

3 After accessing the connection’s general settings, click on the Properties button.

Chapter 2 The Web Configurator

WAP6804 User’s Guide

18

Note: You can also access the adapter’s settings by clicking on Change adapter settings

located on the left side bar. Then right-clicking on the Local Area Connection icon and

selecting Properties.

4 In the connection’s properties select the Internet Protocol Version 4 (TCP/IPv4) item, then click on the

Properties button.

5 Once you have accessed the Internet Protocol Version 4 (TCP/IPv4) properties, click on the Use the

following IP address radio button and type your new IP address. Your computer must be in the same

subnet in order to access this website address.You must give it a fixed IP address in the range between

192.168.1.3 and 192.168.1.254. Then type 255.255.255.0 as your subnet mask, click OK to close the

Internet Protocol Version 4 (TCP/IPv4) Properties window. Then click OK to close the Local Area

Connection

Chapter 2 The Web Configurator

WAP6804 User’s Guide

19

Note: After you have configured your WAP6804, you must remember to change your static IP

back to automatic to be able to access the Internet. If you want to change the IP

address to automatic (default) then repeat steps 1 to 4, for step 5 select the Obtain an

IP address automatically radio button, and click OK.

2.3.2 Static IP Configuration in MAC OS X

Follow these steps to change your computer’s IP address in MAC OS X 10.11 operating system.

1 Open your System Preferences, then click on Network.

2 Once the Network screen is open, it is recommended you click on Location > Edit Locations to create a

new profile. Use the + button to add a new profile, in this case it is called Static IP. This will easily help you

change from static IP address to automatic.

Chapter 2 The Web Configurator

WAP6804 User’s Guide

20

3 After creating your Static IP profile, make sure it is selected, then click on the Configure IPv4 scroll button

and select Manually. Then modify your IP Address, your computer must be in the same subnet in order to

access this website address.You must give it a fixed IP address in the range between 192.168.1.3 and

192.168.1.254. Then type 255.255.255.0 as your subnet mask, and click Apply to save your changes.

La pagina si sta caricando...

ZyXEL WAP6804 Guida utente

ZyXEL WAP6804 Guida utente

in altre lingue

Documenti correlati

Altri documenti