Celestron 21035 Manuale del proprietario

Categoria
Telescopi
Tipo
Manuale del proprietario

Questo manuale è adatto anche per

INSTRUCTION MANUAL
Models #21035 (70), #21038 (50)
ENGLISH
ENGLISH I 3
CONTENTS
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
SOLAR WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
WHAT’S IN THE BOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ASSEMBLING YOUR TELESCOPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Setting up the Tripod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Attaching the Telescope Tube to the Tripod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Moving the Travel Scope Manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing the Diagonal & Eyepiece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Installing the Finderscope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Aligning the Finderscope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
TELESCOPE BASICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Focusing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Calculating Magnification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Installing & Using the Barlow Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Determining Field of View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
General Observing Hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
ASTRONOMY BASICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
The Celestial Coordinate System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Motion of the Stars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
CELESTIAL OBSERVING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Observing the Moon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Observing the Planets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Observing the Sun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Observing Deep-Sky Objects. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Seeing Conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
TELESCOPE MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Care and Cleaning of the Optics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
TECHNICAL SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
CELESTRON TWO YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
4 I ENGLISH
ENGLISH I 5
Congratulations on your purchase of a Celestron Travel Scope. The Travel Scope is made of the highest quality materials
to ensure stability and durability. All this adds up to a telescope that gives you a lifetime of pleasure with a minimal amount
of maintenance.
This telescope was designed with traveling in mind offering exceptional value. The Travel Scope features a compact and
portable design with ample optical performance. Your Travel Scope is ideal for terrestrial as well as very casual astronomical
observation.
The Travel Scope carries a two year limited warranty. For details see our website at www.celestron.com
Some of the standard features of the Travel Scope include:
Coated glass optical elements for clear, crisp images.
Erect image diagonal so that your views are correctly oriented.
Smooth functioning altazimuth mount with easy pointing to located objects.
Preassembled aluminum full size photographic tripod ensures a stable platform.
Quick and easy no-tool set up.
The telescope and tripod fit inside the standard backpack for easy traveling.
Take time to read through this manual before embarking on your journey through the Universe. It may take a few observing
sessions to become familiar with your telescope, so you should keep this manual handy until you have fully mastered your
telescope’s operation. The manual gives detailed information regarding each step as well as needed reference material and
helpful hints to make your observing experience simple and pleasurable as possible.
Your telescope is designed to give you years of fun and rewarding observations. However, there are a few things to consider
before using your telescope that will ensure your safety and protect your equipment.
INTRODUCTION
Never look directly at the Sun with the naked eye or with a telescope unless you have the proper solar filter. Permanent and
irreversible eye damage may result.
Never use your telescope to project an image of the Sun onto any surface. Internal heat build-up can damage the
telescope and any accessories attached to it.
Never use an eyepiece solar filter or a Herschel wedge. Internal heat build-up inside the telescope can cause these devices
to crack or break, allowing unfiltered sunlight to pass through to the eye.
Do not leave the telescope unsupervised, either when children are present or adults unfamiliar with the correct operating
procedures of your telescope are present.
SOLAR WARNING
6 I ENGLISH
We recommend saving your telescope box so it can be used to store the telescope when it is not in use. Unpack the box
carefully as some parts are small. Use the parts list below to verify that all parts and accessories are present.
PARTS LIST
WHAT’S IN THE BOX
ASSEMBLING YOUR TELESCOPE
This section covers the assembly instructions for your Travel
Scope. Your telescope should be set up indoor the first time so
that it is easy to identify the various parts and familiarize yourself
with the correct assembly procedure before attempting it outdoor.
The Travel Scope 70 comes in one box. The pieces in the box
are – telescope optical tube, tripod, erect image diagonal, 20 mm
eyepiece, 10mm eyepiece, 5x24 finderscope with bracket (all packed
in the travel backpack) and a bonus Astronomy software download.
The Travel Scope 50 comes in one box. All items the same as
above except it has a 2x20 finderscope and 8 mm eyepiece
(instead of 10 mm). In addition, the Travel Scope 50 includes a 3x
Barlow Lens – 1.25”.
2
1
1. Objective Lens
2. Telescope Optical Tube
3. Tripod Head Platform
4. Azimuth Locking Knob
5. Central Column Locking Knob
6. Tripod
7. Finderscope
8. Erect Image Diagonal
9. Eyepiece
10. Focus Knob
11. Pan Handle
7
3
4
6
8
9
10
11
5
Fig. 2
Fig. 1 Travel Scope 70 (Similar to Travel Scope 50)
ENGLISH I 7
SETTING UP THE TRIPOD
1. The tripod comes preassembled so that the set up is very easy.
2. Stand the tripod upright and pull the tripod legs outward until
each leg is fully extended (Figure 3).
3.
You can raise the tripod legs to the height you desire. At the
lowest level the height is about 16” (41 cm) and extends to
about 49” (125 cm).
4. To raise the height of the tripod, you unlock the tripod leg lock
clamps at the bottom of each tripod leg (Figure 4) by opening the
clamp for each section by pulling outward. Once a clamp is
unlocked, then pull the tripod leg out as far as it will go and then
close the leg lock to secure it. Continue doing this for each
tripod leg and each section to raise the height to the level you
desire. A fully extended tripod looks similar to the image in Figure
5. With all the legs raised up on all sections, the height will be
about 42” (107 cm).
5. If you want to raise the tripod height up further you must use the
central column locking knob which is the knob located at the
bottom left in Figure 6. Turn the locking knob counterclockwise
until loose. Then, pull up on the head of the tripod and the
central column will move up. Continue pulling to the height you
desire and then tighten the locking knob. When the central
column is raised up as far as it will go, then the maximum height
possible is achieved – 49” (125 cm).
Fig. 3
Fig. 4
Fig. 5
Fig. 6
8 I ENGLISH
ATTACHING THE TELESCOPE TUBE TO THE TRIPOD
The telescope optical tube attaches to the tripod by using the mounting bracket on the bottom of the optical tube and the
mounting platform of the tripod. Before starting make sure all of the knobs on the tripod are locked.
1. Remove the protective paper covering the optical tube.
2. Loosen the top right knob (figure 7) by turning it counterclockwise.
This allows you to tilt the tripod platform up 90° as shown in
figure 8. After tilting the platform up, tighten the knob to secure
it in place.
3. Figure 9 shows the bottom of the optical tube, the tripod
platform, and where they will attach to each other.
4. Under the center of the tripod platform, you will see a knob
(figure 9) that contains a ¼ x 20 screw to attach the platform to
the telescope optical tube.
5. You can put the ¼ x 20 screw into the threaded holes of the
Travel Scope 70 (it doesn’t matter which one you use) in the
mounting bracket of the telescope optical tube whereas the
Travel Scope 50 has only one threaded hole. Hold the optical
tube with one hand while threading the screw clockwise until
tight with the other hand. Now the assembly will look like
Figure 10.
6. Lastly, loosen the knob for the tripod platform and lower the
platform down to the level position. Then, tighten the knob
securely.
Fig. 7
Fig. 8
Fig. 9
Fig. 10
MOVING THE TRAVEL SCOPE MANUALLY
The Travel Scope is easy to move wherever you want to point it. The up and down (altitude) is controlled by the Pan Handle
Control Knob (figure 1). The side-to-side (azimuth) is controlled by the Azimuth Locking Knob (top left knob in Figure 7). Both
knobs are loosened when turned counterclockwise and tightened when turned clockwise. When both knobs are loose you
can find your objects easily (through the finderscope which is discussed shortly) and then lock the controls.
ENGLISH I 9
INSTALLING THE DIAGONAL AND EYEPIECE
The diagonal is a prism that diverts the light at a right angle to the light path of the telescope. This allows you to observe
in a position that is more comfortable than if you had to look straight through. The Travel Scope diagonal is an erect image
model that corrects the image to be right side up and oriented correctly left-to-right which is much easier to use for terrestrial
observing. Also, the diagonal can be rotated to any position which is most favorable for you. To install the diagonal and
eyepiece:
1. Make sure the two thumbscrews on the rear of the telescope
tube do not protrude into the opening before installation, the
plug up cap is removed from the opening at the rear of the
telescope tube, and the caps are removed from the barrels on
the diagonal. Insert the small barrel of the diagonal all the way
into the rear opening of the telescope tube (Figure 11). Then
tighten the two thumbscrews.
2. Put the chrome barrel end of one of the eyepieces into the
diagonal and tighten the thumb screw. When doing this make
sure the thumbscrew is not protruding into the diagonal before
inserting the eyepiece.
3.
The eyepieces can be changed to other focal lengths by
reversing the procedure in step 2 above.
Fig. 11
INSTALLING THE FINDERSCOPE (TRAVEL SCOPE 70 ONLY)
1. Locate the finderscope (it will be mounted in the finderscope
bracket).
2. Remove the knurled nuts on the threaded posts on the
telescope tube (Figure 12).
3. Mount the finderscope bracket by placing it over the posts
protruding from the optical tube and then holding it in place
thread on the knurled nuts and tightening them down.
4. Note that the finderscope should be oriented so that the larger
diameter lens is facing toward the front of the telescope tube.
5. Remove the lens caps from both ends of the finderscope.
ALIGNING THE FINDERSCOPE
1. Locate a distant daytime object and center it in the low power (20 mm) eyepiece in the main telescope.
2. Look through the finderscope (the eyepiece end of the finderscope) and take notice of the position of the same object.
3. Without moving the main telescope, turn the adjustment thumbscrews (figure 12) located around the finderscope bracket
until the crosshairs of the finderscope are centered on the object chosen with the main telescope.
4. If the image through the finderscope is out of focus, rotate the eyepiece of the finderscope for a clear view.
Note: Objects viewed through a finderscope are upside down and backwards which is normal.
Fig. 12
Finderscope
Bracket
Finderscope
Eyepiece
Adjustment
Screws
Knurled
Nuts
Objective Lens
10 I ENGLISH
TELESCOPE BASICS
FOCUSING
To focus your Travel Scope turn the focus knob located near the rear of the telescope (see Figure 1). Turning the
knob counterclockwise allows you to focus on an object that is farther than the one you are currently observing.
Turning the knob clockwise from you allows you to focus on an object closer than the one you are currently observing.
Note: Remove the front lens cap of the Travel Scope optical tube prior to attempting your observation.
Note: If you wear corrective lenses (specifically glasses), you may want to remove them when observing with an eyepiece
attached to the telescope. If you have astigmatism, corrective lenses should be worn at all times.
Focal length of Telescope (mm)
Magnification =
_____________________________
Focal length of Eyepiece (mm)
INSTALLING AND USING THE BARLOW LENS (TRAVEL SCOPE 50 ONLY)
Let’s say, for example, you are using the 20mm eyepiece that came with your Travel Scope 70 telescope. To determine the
magnification you divide the focal length of your telescope (the Travel Scope for this example has a focal length of 400mm)
by the focal length of the eyepiece, 20mm. Dividing 400 by 20 yields a magnification of 20x.
Although the power is variable, every telescope under average skies has a limit to the highest useful magnification. The
general rule is that 60 power can be used for every inch of aperture. For example, the Travel Scope 70 is 2.8” inches in
diameter. Multiplying 2.8 by 60 gives a maximum useful magnification of 168 power. Although this is the maximum useful
magnification, most of your observing will be done at low powers which generate brighter and sharper images.
Note on Using High Powers– Higher powers are used mainly for lunar and sometimes planetary observing where you can
greatly enlarge the image, but remember that the contrast and brightness will be very low due to the high magnification.
When using the 8mm eyepiece together with the 3x Barlow lens with the Travel Scope 50 gives extremely high power and
can be used on rare occasions – you will achieve the power but the image will be dark with low contrast because you have
magnified it to the maximum possible. For the brightest images with the highest contrast levels, use lower powers.
You can purchase optional eyepieces to give you a range of powers you can observe with. Visit the Celestron website to see
what is available.
Your telescope also comes with a 3x Barlow Lens
which triples the magnifying power of each eyepiece.
However, the greatly magnified images should only
be used under ideal conditions – see the Calculating
Magnification section of this manual. To use the
Barlow lens remove the diagonal and insert the
Barlow directly into the focuser tube. You then insert
an eyepiece into the Barlow lens for viewing.
Note: Start by using a low power eyepiece as it will
be easier to focus.
CALCULATING MAGNIFICATION
You can change the power of your telescope just by changing the eyepiece (ocular). To determine the magnification of your
telescope, simply divide the focal length of the telescope by the focal length of the eyepiece used. In equation format, the
formula looks like this:
3x Barlow Lens
Fig. 13
ENGLISH I 11
DETERMINING FIELD OF VIEW
Determining the field of view is important if you want to get an idea of the angular size of the object you are observing. To
calculate the actual field of view, divide the apparent field of the eyepiece (supplied by the eyepiece manufacturer) by the
magnification. In equation format, the formula looks like this:
Apparent Field of of Eyepiece
True Angular Field =
________________________________
Magnification
As you can see, before determining the field of view, you must calculate the magnification. Using the example in the previous
section, we can determine the field of view using the same 20 mm eyepiece that is supplied standard with the Travel Scope
70. The 20 mm eyepiece has an apparent field of view of 50°. Divide the 50° by the magnification, which is 20 power. This
yields an actual (true) field of 2.5°.
To convert degrees to feet at 1,000 yards (which is more useful for terrestrial observing) multiply by 52.5. Multiply the
angular field of 2.5° by 52.5. This produces a linear field width of 131 feet at a distance of one thousand yards.
GENERAL OBSERVING HINTS
When using any optical instrument, there are a few things to remember to ensure you get the best possible image.
Never look through window glass. Glass found in household windows is optically imperfect, and as a result, may vary in
thickness from one part of a window to the next. This inconsistency can and will affect the ability to focus your telescope. In
most cases you will not be able to achieve a truly sharp image, while in some cases you may actually see a double image.
Never look across or over objects that are producing heat waves. This includes asphalt parking lots on hot summer days or
building rooftops.
Hazy skies, fog, and mist can also make it difficult to focus when viewing terrestrially. The amount of detail seen under these
conditions is greatly reduced.
Note: Your telescope was designed for terrestrial observation. Knowing how to use it for this purpose has been described
already as it is quite simple and straightforward. Your telescope can also be used for casual astronomical observing
which will be discussed in the next sections.
ASTRONOMY BASICS
Up to this point, this manual covered the assembly and basic operation of your telescope. However, to understand your
telescope more thoroughly, you need to know a little about the night sky. This section deals with observational astronomy in
general and includes information on the night sky.
THE CELESTIAL COORDINATE SYSTEM
To help find objects in the sky, astronomers use a celestial coordinate system that is similar to our geographical coordinate system
here on Earth. The celestial coordinate system has poles, lines of longitude and latitude, and an equator. For the most part, these
remain fixed against the background stars.
12 I ENGLISH
The celestial equator runs 360 degrees around the Earth and separates the northern celestial hemisphere from the southern.
Like the Earth’s equator, it bears a reading of zero degrees. On Earth this would be latitude. However, in the sky this is referred
to as declination, or DEC for short. Lines of declination are named for their angular distance above and below the celestial
equator. The lines are broken down into degrees, minutes of arc, and seconds of arc. Declination readings south of the equator
carry a minus sign (-) in front of the coordinate and those north of the celestial equator are either blank (i.e., no designation) or
preceded by a plus sign (+).
The celestial equivalent of longitude is called Right Ascension or R.A. for short. Like the Earth’s lines of longitude, they run from
pole to pole and are evenly spaced 15 degrees apart. Although the longitude lines are separated by an angular distance, they
are also a measure of time. Each line of longitude is one hour apart from the next. Since the Earth rotates once every 24 hours,
there are 24 lines total. As a result, the R.A. coordinates are marked off in units of time. It begins with an arbitrary point in the
constellation of Pisces designated as 0 hours, 0 minutes, 0 seconds. All other points are designated by how far (i.e., how long)
they lag behind this coordinate after it passes overhead moving toward the west.
MOTION OF THE STARS
The daily motion of the Sun across the sky is familiar to even the most casual observer. This daily trek is not the Sun moving as
early astronomers thought, but the result of the Earth’s rotation. The Earth’s rotation also causes the stars to do the same, scribing
out a large circle as the Earth completes one rotation. The size of the circular path a star follows depends on where it is in the sky.
Stars near the celestial equator form the largest circles rising in the east and setting in the west. Moving toward the north celestial
pole, the point around which the stars in the northern hemisphere appear to rotate, these circles become smaller. Stars in the
mid-celestial latitudes rise in the northeast and set in the northwest. Stars at high celestial latitudes are always above the horizon,
and are said to be circumpolar because they never rise and never set. You will never see the stars complete one circle because
the sunlight during the day washes out the starlight. However, part of this circular motion of stars in this region of the sky can be
seen by setting up a camera on a tripod and opening the shutter for a couple hours. The timed exposure will reveal semicircles
that revolve around the pole. (This description of stellar motions also applies to the southern hemisphere except all stars south of
the celestial equator move around the south celestial pole.)
Stars seen near the north celestial pole Stars seen near the celestial equator Stars seen looking in the opposite direction
of the north celestial pole
Fig. 15
All stars appear to rotate around the celestial poles. However, the appearance of this motion varies depending on where you are looking in the sky. Near
the north celestial pole the stars scribe out recognizable circles centered on the pole (1). Stars near the celestial equator also follow circular paths around
the pole. But, the complete path is interrupted by the horizon. These appear to rise in the east and set in the west (2). Looking toward the opposite pole,
stars curve or arc in the opposite direction scribing a circle around the opposite pole (3).
Fig. 14
The celestial sphere seen from the
outside showing R.A. and DEC.
ENGLISH I 13
CELESTIAL OBSERVING
With your telescope set up, you are ready to use it for observing. This section covers visual observing hints for solar system and
deep sky objects as well as general observing conditions which will affect your ability to observe.
OBSERVING THE MOON
With your telescope set up, you are ready to use it for observing. This section covers visual observing hints for solar system and
deep sky objects as well as general observing conditions which will affect your ability to observe.
Often, it is tempting to look at the Moon when it is full. At this time, the face
we see is fully illuminated and its light can be overpowering. In addition,
little or no contrast can be seen during this phase. One of the best times
to observe the Moon is during its partial phases (around the time of first or
third quarter). Long shadows reveal a great amount of detail on the lunar
surface. At low power you will be able to see most of the lunar disk at
one time. Change to optional eyepieces for higher power (magnification) to
focus in on a smaller area.
Lunar Observing Hints
To increase contrast and bring out detail on the lunar surface, use optional
filters. A yellow filter works well at improving contrast while a neutral density
or polarizing filter will reduce overall surface brightness and glare.
OBSERVING THE PLANETS
Other fascinating targets include the five naked eye planets. You can see Venus go through its lunar-like phases. Mars can reveal
a host of surface detail and one, if not both, of its polar caps. You may be able to see the cloud belts of Jupiter and the great Red
Spot (if it is visible at the time you are observing). In addition, you will also
be able to see the moons of Jupiter as they orbit the giant planet. Saturn,
with its beautiful rings, is e visible at moderate power.
Planetary Observing Hints
Remember that atmospheric conditions are usually the limiting factor on
how much planetary detail will be visible. So, avoid observing the planets
when they are low on the horizon or when they are directly over a source
of radiating heat, such as a rooftop or chimney. See the “Seeing
Conditions” section later in this section.
To increase contrast and bring out detail on the planetary surface, try
using Celestron eyepiece filters.
OBSERVING THE SUN
Although overlooked by many amateur astronomers, solar observation is both rewarding and fun. However, because the Sun is so
bright, special precautions must be taken when observing our star so as not to damage your eyes or your telescope.
For safe solar viewing, use a proper solar filter that reduces the intensity of the Sun’s light, making it safe to view. With a filter you
can see sunspots as they move across the solar disk and faculae, which are bright patches seen near the Sun’s edge.
The best time to observe the Sun is in the early morning or late afternoon when the air is cooler.
To center the Sun without looking into the eyepiece, watch the shadow of the telescope tube until it forms a circular shadow.
14 I ENGLISH
OBSERVING DEEP-SKY OBJECTS
Deep-sky objects are simply those objects outside the boundaries of our solar system. They include star clusters, planetary
nebulae, diffuse nebulae, double stars and other galaxies outside our own Milky Way. Most deep-sky objects have a large
angular size. Therefore, low-to-moderate power is all you need to see them. Visually, they are too faint to reveal any of the
color seen in long exposure photographs. Instead, they appear black and white. And, because of their low surface brightness,
they should be observed from a dark-sky location. Light pollution around large urban areas washes out most nebulae making
them difficult, if not impossible, to observe. Light Pollution Reduction filters help reduce the background sky brightness, thus
increasing contrast.
Star Hopping
One convenient way to find deep-sky objects is by star hopping. Star hopping is done by using bright stars to “guide” you to an
object. For successful star hopping, it is helpful to know the field of view of you telescope. If you’re using the standard 20 mm
eyepiece with the Travel Scope 70, your field of view is approximately 2.5º or so. If you know an object is 3º away from your present
location, then you just need to move a little more than one field of view. If you’re using another eyepiece, then consult the section
on determining field of view. Listed below are directions for locating two popular objects.
The Andromeda Galaxy (Figure 16), also known as M31, is an easy target. To find M3:
1. Locate the constellation of Pegasus, a large square visible in the fall (in the eastern sky, moving toward the point overhead)
and winter months (overhead, moving toward the west).
2. Start at the star in the northeast corner—Alpha (α ) Andromedae.
3. Move northeast approximately 7°. There you will find two stars of equal brightness—Delta (δ) and Pi (π) Andromeda—about
3° apart.
4. Continue in the same direction another 8°. There you will find two stars—Beta (β) and Mu (μ) Andromedae —also about
3° apart.
5. Move 3° northwest—the same distance between the two stars—to the Andromeda galaxy.
Star hopping to the Andromeda Galaxy (M31) is a snap, since all the stars needed to do so are visible to the naked eye.
Fig. 16
Andromeda Galaxy
ENGLISH I 15
Star hopping will take some getting used to and objects that don’t have stars near them that are visible to the naked eye are
challenging. One such object is M57 (Figure 17), the famed Ring Nebula. Here’s how to find it:
1. Find the constellation of Lyra, a small parallelogram visible in the summer and fall months. Lyra is easy to pick out because
it contains the bright star Vega.
2. Start at the star Vega—Alpha (α ) Lyrae—and move a few degrees southeast to find the parallelogram. The four stars that
make up this geometric shape are all similar in brightness, making them easy to see.
3. Locate the two southernmost stars that make up the parallelogram—Beta (β) and Gamma (γ ) Lyra.
4. Point about halfway between these two stars.
5. Move about ½° toward Beta (β) Lyra, while remaining on a line connecting the two stars.
6. Look through the telescope and the Ring Nebula should be in your field of view. The Ring Nebula’s angular size is quite
small and difficult to see.
7. Because the Ring Nebula is rather faint, you may need to use “averted vision” to see it. “Averted vision” is a technique of
looking slightly away from the object you’re observing. So, if you are observing the Ring Nebula, center it in your field of
view and then look off toward the side. This causes light from the object viewed to fall on the black and white sensitive
rods of your eyes, rather than your eyes color sensitive cones. (Remember that when observing faint objects, it’s important
to try to observe from a dark location, away from street and city lights. The average eye takes about 20 minutes to fully
adapt to the darkness. So always use a red-filtered flashlight to preserve your dark-adapted night vision).
These two examples should give you an idea of how to star hop to deep-sky objects. To use this method on other objects,
consult a star atlas, then star hop to the object of your choice using “naked eye” stars.
Fig. 17
Ring Nebula
16 I ENGLISH
SEEING CONDITIONS
Viewing conditions affect what you can see through your telescope during an observing session. Conditions include
transparency, sky illumination, and seeing. Understanding viewing conditions and the effect they have on observing will help
you get the most out of your telescope.
Transparency
Transparency is the clarity of the atmosphere which is affected by clouds, moisture, and other airborne particles. Thick cumulus
clouds are completely opaque while cirrus can be thin, allowing the light from the brightest stars through. Hazy skies absorb more
light than clear skies making fainter objects harder to see and reducing contrast on brighter objects. Aerosols ejected into the
upper atmosphere from volcanic eruptions also affect transparency. Ideal conditions are when the night sky is inky black.
Sky Illumination
General sky brightening caused by the Moon, aurorae, natural airglow, and light pollution greatly affect transparency. While not
a problem for the brighter stars and planets, bright skies reduce the contrast of extended nebulae making them difficult, if not
impossible to see. To maximize your observing, limit deep sky viewing to moonless nights far from the light polluted skies found
around major urban areas. LPR filters enhance deep sky viewing from light polluted areas by blocking unwanted light while
transmitting light from certain deep sky objects. You can, on the other hand, observe planets and stars from light polluted areas
or when the Moon is out.
Seeing
Seeing conditions refers to the stability of the atmosphere and directly affects the amount of fine detail seen in extended
objects. The air in our atmosphere acts as a lens which bends and distorts incoming light rays. The amount of bending depends
on air density. Varying temperature layers have different densities and, therefore, bend light differently. Light rays from the same
object arrive slightly displaced creating an imperfect or smeared image. These atmospheric disturbances vary from time-to-time
and place-to-place. The size of the air parcels compared to your aperture determines the “seeing” quality. Under good seeing
conditions, fine detail is visible on the brighter planets like Jupiter and Mars, and stars are pinpoint images. Under poor seeing
conditions, images are blurred and stars appear as blobs.
The conditions described here apply to both visual and photographic observations.
Fig. 18
Seeing conditions directly affect image quality. These drawings represent a point source (i.e., star) under bad
seeing conditions (left) to excellent conditions (right). Most often, seeing conditions produce images that lie
some where between these two extremes.
ENGLISH I 17
TELESCOPE MAINTENANCE
While your telescope requires little maintenance, there are a few things to remember that will ensure your telescope
performs at its best.
CARE AND CLEANING OF THE OPTICS
Occasionally, dust and/or moisture may build up on the objective lens of your telescope. Special care should be taken when
cleaning any instrument so as not to damage the optics.
If dust has built up on the optics, remove it with a brush (made of camel’s hair) or a can of pressurized air. Spray at an angle
to the glass surface for approximately two to four seconds. Then, use an optical cleaning solution and white tissue paper to
remove any remaining debris. Apply the solution to the tissue and then apply the tissue paper to the optics. Low pressure
strokes should go from the center of the lens (or mirror) to the outer portion. Do NOT rub in circles!
You can use a commercially made lens cleaner or mix your own. A good cleaning solution is isopropyl alcohol mixed with
distilled water. The solution should be 60% isopropyl alcohol and 40% distilled water. Or, liquid dish soap diluted with water
(a couple of drops per one quart of water) can be used.
Occasionally, you may experience dew build-up on the optics of your telescope during an observing session. If you want to
continue observing, the dew must be removed, either with a hair dryer (on low setting) or by pointing the telescope at the
ground until the dew has evaporated.
If moisture condenses on the inside of the optics, remove the accessories from the telescope. Place the telescope in a dust-
free environment and point it down. This will remove the moisture from the telescope tube.
To minimize the need to clean your telescope, replace all lens covers once you have finished using it. Since the cells are NOT
sealed, the covers should be placed over the openings when not in use. This will prevent contaminants from entering the
optical tube.
Internal adjustments and cleaning should be done only by the Celestron repair department. If your telescope is in need of
internal cleaning, please call the factory for a return authorization number and price quote.
18 I ENGLISH
TECHNICAL
SPECIFICATIONS
Model # 21035
Travel Scope 70
Model # 21038
Travel Scope 50
Optical Design Refractor Refractor
Aperture 70 mm (2.8") 50 mm (2.0”)
Focal Length 400 mm 360 mm
Focal Ratio f/5.7 f/7.2
Optical Coatings Fully Coated Coated
Finderscope 5x24 2x20
Diagonal Erect Image - 45° 1.25" Erect Image .96” to 1.25” - 45°
Eyepieces 20 mm 1.25" (20x) 20 mm 1.25” (18x)
10 mm 1.25" (40x) 8 mm 1.25” (45x)
Barlow Lens – 3x 1.25” N/A Yes (60x & 135x)
Apparent Field of View 20 mm @ 50° 20 mm @ 32°
10 mm @ 50° 8 mm @ 30°
Angular Field of View 20 mm @ 2.5° 20 mm @ 1.6°
10 mm @ 1.3° 8 mm @ 0.7°
Linear Field of View --
ft/1000 yards 20 mm @ 131/44 20 mm @ 84/28
m/1000 meters 10 mm @ 67/22 8 mm @ 37/13
Near Focus w/20 mm Eyepiece 19’ (5.8 m) 15’ (4.5 m)
Mount Altazimuth (Photo Tripod) Altazimuth (Photo Tripod)
Altitude Locking Knob Yes Yes
Azimuth Locking Knob No No
Astronomy Software Download Yes Yes
Highest Useful Magnification 168x 120x
Limiting Stellar Magnitude 11.7 11.1
Resolution -- Raleigh (arc seconds) 1.98 2.66
Resolution -- Dawes Limit “ “ 1.66 2.28
Light Gathering Power 100x 51x
Optical Tube Length 17” (43 cm) 12” (30 cm)
Telescope Weight 3.3# (1.5 kg) 2.2# (1.0 kg)
Note: Specifications are subject to change without notice or obligation.
ENGLISH I 19
NOTES
© 2017 Celestron • All rights reserved
www.celestron.com
2835 Columbia Street • Torrance, CA 90503 U.S.A.
Telephone: 800.421.9649
CELESTRON TWO YEAR LIMITED WARRANTY
A. Celestron warrants your telescope to be free from defects in materials and workmanship for two years. Celestron will repair or replace
such product or part thereof which, upon inspection by Celestron, is found to be defective in materials or workmanship. As a condition to
the obligation of Celestron to repair or replace such product, the product must be returned to Celestron together with proof-of-purchase
satisfactory to Celestron.
B. The Proper Return Authorization Number must be obtained from Celestron in advance of return. Call Celestron at (310) 328-9560 to receive
the number to be displayed on the outside of your shipping container.
All returns must be accompanied by a written statement setting forth the name, address, and daytime telephone number of the owner, together
with a brief description of any claimed defects. Parts or product for which replacement is made shall become the property of Celestron.
The customer shall be responsible for all costs of transportation and insurance, both to and from the factory of Celestron, and shall be required
to prepay such costs.
Celestron shall use reasonable efforts to repair or replace any telescope covered by this warranty within thirty days of receipt. In the event repair
or replacement shall require more than thirty days, Celestron shall notify the customer accordingly. Celestron reserves the right to replace any
product which has been discontinued from its product line with a new product of comparable value and function.
This warranty shall be void and of no force of effect in the event a covered product has been modified in design or function, or subjected
to abuse, misuse, mishandling or unauthorized repair. Further, product malfunction or deterioration due to normal wear is not covered by
this warranty.
CELESTRON DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WHETHER OF MERCHANTABILITY OF FITNESS FOR A PARTICULAR USE, EXCEPT AS EXPRESSLY SET FORTH HEREIN. THE SOLE
OBLIGATION OF CELESTRON UNDER THIS LIMITED WARRANTY SHALL BE TO REPAIR OR REPLACE THE COVERED PRODUCT, IN ACCORDANCE WITH THE TERMS SET FORTH HEREIN. CELESTRON
EXPRESSLY DISCLAIMS ANY LOST PROFITS, GENERAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHICH MAY RESULT FROM BREACH OF ANY WARRANTY, OR ARISING OUT OF THE USE
OR INABILITY TO USE ANY CELESTRON PRODUCT. ANY WARRANTIES WHICH ARE IMPLIED AND WHICH CANNOT BE DISCLAIMED SHALL BE LIMITED IN DURATION TO A TERM OF TWO YEARS
FROM THE DATE OF ORIGINAL RETAIL PURCHASE.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation on how long an implied warranty lasts,
so the above limitations and exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Celestron reserves the right to modify or discontinue, without prior notice to you, any model or style telescope.
If warranty problems arise, or if you need assistance in using your telescope contact: Celestron - 800.421.9649
NOTE: This warranty is valid to U.S.A. and Canadian customers who have purchased this product from an authorized Celestron dealer in the U.S.A. or Canada. Warranty outside the U.S.A. and Canada
is valid only to customers who purchased from a Celestron’s International Distributor or Authorized Celestron Dealer in the specific country. Please contact them for any warranty service.
FCC NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Product design and specifications are subject to change without prior notification.
This product is designed and intended for use by those 14 years of age and older.
04-17
Printed in China
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100

Celestron 21035 Manuale del proprietario

Categoria
Telescopi
Tipo
Manuale del proprietario
Questo manuale è adatto anche per