Yamaha ELB-02 Manuale del proprietario

Owner’s Manual

ELB-02

EN

Before using the instrument, be sure to read “PRECAUTIONS” on pages 4-5.

For information on assembling the instrument, refer to the instructions at the end of this manual.

2

ELB-02 Owner’s Manual

3

ELB-02 Owner’s Manual

4

ELB-02 Owner’s Manual

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the

following:

• Do not place the power cord near heat sources such as heaters or radiators.

Also, do not excessively bend or otherwise damage the cord, or place heavy

objects on it.

• Only use the voltage specified as correct for the instrument. The required

voltage is printed on the name plate of the instrument.

• Use only the supplied power cord/plug.

• Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it.

• This instrument contains no user-serviceable parts. Do not open the instrument

or attempt to disassemble or modify the internal components in any way. If it

should appear to be malfunctioning, discontinue use immediately and have it

inspected by qualified Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet

conditions, or place on it any containers (such as vases, bottles or glasses)

containing liquids which might spill into any openings. If any liquid such as

water seeps into the instrument, turn off the power immediately and unplug the

power cord from the AC outlet. Then have the instrument inspected by qualified

Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit. A burning item may fall

over and cause a fire.

• When one of the following problems occur, immediately turn off the power

switch and disconnect the electric plug from the outlet. Then have the device

inspected by Yamaha service personnel.

- The power cord or plug becomes frayed or damaged.

- It emits unusual smells or smoke.

- Some object has been dropped into the instrument.

- There is a sudden loss of sound during use of the instrument.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• Do not connect the instrument to an electrical outlet using a multiple-connector.

Doing so can result in lower sound quality, or possibly cause overheating in the

outlet.

• When removing the electric plug from the instrument or an outlet, always hold

the plug itself and not the cord. Pulling by the cord can damage it.

• Remove the electric plug from the outlet when the instrument is not to be used

for extended periods of time, or during electrical storms.

• Read carefully the attached documentation explaining the assembly process.

Failure to assemble the instrument in the proper sequence might result in

damage to the instrument or even injury.

• Do not place the instrument in an unstable position where it might accidentally

fall over.

• When transporting or moving the instrument, always use two or more people.

Attempting to lift the instrument by yourself may damage your back, result in

other injury, or cause damage to the instrument itself.

• Before moving the instrument, remove all connected cables, to prevent damage

to the cables or injury to anyone who might trip over them.

• When setting up the product, make sure that the AC outlet you are using is

easily accessible. If some trouble or malfunction occurs, immediately turn off

the power switch and disconnect the plug from the outlet. Even when the power

switch is turned off, electricity is still flowing to the product at the minimum

level. When you are not using the product for a long time, make sure to unplug

the power cord from the wall AC outlet.

Power supply/Power cord

Do not open

Water warning

Fire warning

If you notice any abnormality

Power supply/Power cord

Assembly

Location

DMI-5 1/2

5

ELB-02 Owner’s Manual

• Before connecting the instrument to other electronic components, turn off the

power for all components. Before turning the power on or off for all components,

set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum levels and

gradually raise the volume controls while playing the instrument to set the

desired listening level.

• Do not insert a finger or hand in any gaps on the instrument.

• Never insert or drop paper, metallic, or other objects into the gaps on the panel

or keyboard. This could cause physical injury to you or others, damage to the

instrument or other property, or operational failure.

• Do not rest your weight on, or place heavy objects on the instrument, and do not

use excessive force on the buttons, switches or connectors.

• Do not use the instrument/device or headphones for a long period of time at a

high or uncomfortable volume level, since this can cause permanent hearing

loss. If you experience any hearing loss or ringing in the ears, consult a

physician.

• Do not rest your legs or feet on the Expression Pedal or Pedal Box from the back

of the instrument, or climb on the instrument, or put excessive weight on it.

• Do not place the bench in an unstable position where it might accidentally fall

over.

• Do not play carelessly with or stand on the bench. Using it as a tool or

stepladder or for any other purpose might result in accident or injury.

• Only one person should sit on the bench at a time, in order to prevent the

possibility of accident or injury.

• If the bench screws become loose due to extensive long-term use, tighten them

periodically using the specified tool in order to prevent the possibility of

accident or injury.

• Keep special watch over any small children so that they don’t fall off the rear of

the bench. Since the bench does not have a backrest, unsupervised use may

result in accident or injury.

Always turn the power off when the instrument is not in use.

Even when the [ ] (Standby/On) switch is in standby status (display is off), electricity is still flowing to the instrument at the minimum level.

When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.

Connections

Handling caution

Using the bench (If included)

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.

The model number, serial number, power requirements, etc., may be

found on or near the name plate, which is at the bottom of the unit. You

should note this serial number in the space provided below and retain

this manual as a permanent record of your purchase to aid identification

in the event of theft.

Model No.

Serial No.

The name plate is

located on the bottom

of the unit.

(bottom_en_01)

DMI-5 2/2

6

ELB-02 Owner’s Manual

NOTICE

To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property,

follow the notices below.

 Handling

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices.

Otherwise, the instrument, TV, or radio may generate noise. When you use the instrument along with an application on

your iPad, iPhone or iPod touch, we recommend that you set “Airplane Mode” to “ON” on that device in order to avoid

noise caused by communication.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a

heater, or in a car during the day) to prevent the possibility of panel disfiguration, damage to the internal components or

unstable operation. (Verified operating temperature range: 5° – 40°C, or 41° – 104°F.)

• Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.

 Maintenance

• When cleaning the instrument, use a soft cloth. Do not use paint thinners, solvents, alcohol, cleaning fluids, or

chemical-impregnated wiping cloths.

• During extreme changes in temperature or humidity, condensation may occur and water may collect on the surface of

the instrument. If water is left, the wooden parts may absorb the water and be damaged. Make sure to wipe any water off

immediately with a soft cloth.

 Saving data

• Save your important Registration data onto the USB flash drive (page 116) since the Registration data memorized to the

instrument will be overwritten by certain operations, such as Song playback, etc. Before using a USB flash drive, make

sure to refer to page 132.

•A “” mark appears at the top left of the display indicating that the Registration data is currently being saved. Do not

turn the power off while the Registration is being saved, otherwise the data will be lost.

The Registration Shift settings and Keyboard Percussion settings will be automatically saved to the Registration data

when you switch to another display. While data is being saved, “” appears at the top left of the display indicating that

the Registration data is currently being saved. Do not turn the power off without switching to another display or while

“” is shown in the display, otherwise the data will be lost.

• To protect against data loss through USB flash drive damage, we recommend that you save your important data onto a

spare USB flash drive as backup data.

Information

 About copyrights

• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly

prohibited except for your personal use.

• This product incorporates and bundles contents in which Yamaha owns copyrights or with respect to which Yamaha has

license to use others' copyrights. Due to copyright laws and other relevant laws, you are NOT allowed to distribute

media in which these contents are saved or recorded and remain virtually the same or very similar to those in the

product.

* The contents described above include a computer program, Accompaniment Style data, MIDI data, WAVE data, voice recording data, a score,

score data, etc.

* You are allowed to distribute medium in which your performance or music production using these contents is recorded, and the permission of

Yamaha Corporation is not required in such cases.

7

ELB-02 Owner’s Manual

 About functions/data bundled with the instrument

• This device is capable of using various types/formats of music data by optimizing them to the proper format music data

for use with the device in advance. As a result, this device may not play them back precisely as their producers or

composers originally intended.

• The bitmap fonts used in this instrument have been provided by and are the property of Ricoh Co., Ltd.

 About this manual

• The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear

somewhat different from those on your instrument.

• iPhone, iPad and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

• Electone and STAGEA are the trademarks of Yamaha Corporation.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective

companies.

Compatible Format

“GM (General MIDI)” is one of the most common Voice allocation formats. “GM System Level 2” is a standard

specification that enhances the original “GM” and improves Song data compatibility. It provides for increased

polyphony, greater Voice selection, expanded Voice parameters, and integrated effect processing.

XG is a major enhancement of the GM System Level 1 format, and was developed by Yamaha specifically

to provide more Voices and variations, as well as greater expressive control over Voices and effects, and

to ensure compatibility of data well into the future.

GS was developed by the Roland Corporation. In the same way as Yamaha XG, GS is a major

enhancement of the GM specifically to provide more Voices and Drum kits and their variations, as well

as greater expressive control over Voices and effects.

8

ELB-02 Owner’s Manual

Included Accessories

 Owner’s Manual (this book)

 Playing the ELB-02 — Tutorial Guidebook

 Online Member Product Registration

The “PRODUCT ID” on the sheet will be needed when you fill out the User Registration form.

 Music Rest

 Dust Cover

 Power Cord

 Bench

Congratulations!

Thank you for purchasing this Yamaha Electone!

We recommend that you read this manual carefully so that you can fully take advantage

of the advanced and convenient functions of the instrument. We also recommend that

you keep this manual in a safe and handy place for future reference.

Insert the music rest into the slots as shown.

Dust Cover

9

ELB-02 Owner’s Manual

About the Manuals

This instrument has the following documents and instructional materials.



Included Documents

Owner’s Manual (this book)

Provides overall explanations of the Electone functions.

Playing the ELB-02 — Tutorial Guidebook

This useful book helps you familiarize yourself with the Electone, giving you basic information on

playing the instrument, including the proper playing posture, and providing helpful music scores

which get you started playing the Electone using the preset Registration menu. This book also includes

information on how to record your performance to the USB flash drive, and listen back to your

recorded performances.



Online Materials (PDF)

iPhone/iPad Connection Manual

Explains how to connect this instrument to the iPhone/iPad.

MIDI Reference

Contains MIDI related information such as MIDI Data Format and the MIDI Implementation Chart.

To obtain these manuals, access the Yamaha Downloads website, select your country, enter “ELB-02” in the

Model Name box, then click [Search].

Yamaha Downloads

http://download.yamaha.com/

10

ELB-02 Owner’s Manual

Contents

PRECAUTIONS.................................................................... 4

NOTICE ................................................................................ 6

Information............................................................................ 6

Congratulations! ................................................................... 8

Included Accessories............................................................ 8

About the Manuals................................................................ 9

Main Features..................................................................... 12

Panel Controls and Terminals 13

Overview............................................................................. 13

Front Panel ......................................................................... 14

Quick Introductory Guide 16

Power Supply ..................................................................... 16

Turning On/Off the Power................................................... 16

Adjusting the Volume ......................................................... 17

Adjusting the Contrast of the Display................................. 18

Using Headphones ............................................................ 19

1 Basic Operation 20

Registration Menu .............................................................. 20

Selecting Registrations from the Registration Menu.. 20

Registration Menu List ............................................... 22

Using the LCD display ....................................................... 25

Selecting from a list in the display ............................. 25

Selecting an item and changing its value.................. 25

Changing the Display Page ....................................... 26

Basic Operation.................................................................. 27

Selecting the Display Language................................ 27

Factory Set (Initializing the Electone)......................... 27

Confirming the Version of Your Electone ................... 28

2 Voices 29

Voices for Each Keyboard.................................................. 29

Voice Display...................................................................... 31

Selecting Voices with the Voice buttons ............................ 33

Selecting Voices for Voice section 1.......................... 33

Adjusting the Voice volume ....................................... 34

Selecting a Voice for Voice section 2................................. 36

Switching between Voice section 1 and Voice

section 2 .................................................................. 36

Selecting Voices for Voice Section 2 ......................... 37

Selecting Voices from the User buttons ............................. 39

Voice List............................................................................ 42

3 Voice Controls and Effects 52

Selecting from the Voice Condition display ....................... 53

Rotary Speaker .......................................................... 60

Selecting from the panel .................................................... 61

Reverb........................................................................ 61

Sustain ....................................................................... 63

Effect List............................................................................ 64

4 Rhythm/Keyboard Percussion 68

Selecting rhythms with the Rhythm buttons ...................... 68

To select and play a rhythm...................................... 68

Operating the rhythm from the panel........................ 71

Adjusting the tempo .................................................. 73

Changing the rhythm volume/reverb......................... 74

Selecting rhythms from the User buttons .......................... 75

Rhythm List ........................................................................ 77

Accompaniment ................................................................ 79

Automatic Accompaniment—Auto Bass Chord (A.B.C.) .. 82

Melody On Chord (M.O.C.) ............................................... 85

Keyboard Percussion ........................................................ 88

Using the Preset Keyboard Percussion .................... 88

Preset Keyboard Percussion List .............................. 90

Assigning sounds to the User Keyboard Percussion

.............................................................................. 101

Recalling the User Keyboard Percussion ............... 104

Kit Assign List.......................................................... 105

5 Registration Memory 111

Storing Registrations ....................................................... 111

Selecting Registrations.................................................... 113

Storing Registrations to Another Bank............................. 116

Deleting Banks ................................................................ 117

Saving the Registration Data to USB Flash Drive............ 118

Initializing Registration Memory....................................... 120

Registration Shift.............................................................. 121

6 Music Data Recorder (MDR) 127

Calling Up the MDR Display............................................ 127

Using the MDR Display ................................................... 128

Song icons .............................................................. 130

Connecting a USB Device............................................... 132

Precautions when using the [USB TO DEVICE]

terminal ................................................................. 132

Using USB Flash Drives .......................................... 132

Formatting a USB Flash Drive ......................................... 133

Selecting a Song ............................................................. 134

Recording ........................................................................ 138

Recording................................................................ 138

Re-recording (Retry) ............................................... 140

Recording Each Part Separately............................. 140

Punch-in Recording ................................................ 143

Changing the Song/Folder Name.................................... 144

Saving Registrations........................................................ 147

Saving Two or More Registration Units to One Song

.............................................................................. 149

Overwriting Registration data to a Unit ................... 151

Deleting Registrations ............................................. 152

Next Unit Settings (using more than 80 Registrations

in one performance) ............................................. 153

Recalling Recorded Registrations................................... 154

Loading Registrations ............................................. 154

Playing Back a Song ....................................................... 155

Playing Back Selected Parts ................................... 157

Rewind, Fast Forward and Pause ........................... 157

11

ELB-02 Owner’s Manual

Changing the Tempo ............................................... 158

Repeat Playback...................................................... 159

Playing Back XG Songs ........................................... 160

Other Operations — Copy, Delete, etc. ........................... 161

Copy......................................................................... 161

Song Delete/Folder Delete....................................... 164

Creating folders ....................................................... 165

Converting to XG format .......................................... 166

Checking the Remaining Memory............................ 168

7 Audio 169

Recording Your Performance as Audio............................ 169

Playing Back Audio Files.................................................. 172

Rewind, Fast Forward and Pause ............................ 173

Changing the Volume, Tempo and Pitch ................. 174

Deleting the File / Changing the File Name ............. 176

8 Footswitches 177

Right Footswitch ............................................................... 177

Left Footswitch ................................................................. 177

9 Transpose and Pitch Controls 181

10 Connections 182

Accessory Jacks and Controls......................................... 182

Connection Examples — External Devices...................... 184

Playing the Sounds of the Electone Through

an External Audio System...................................... 184

Outputting the sound of an external device through

the built-in speakers of the Electone ..................... 184

Controlling External MIDI Devices from the Electone

............................................................................... 185

Controlling the Electone from an External Device ... 185

Connection with Computer............................................... 186

Using the [USB TO HOST] terminal ......................... 186

MIDI .................................................................................. 187

What is MIDI? ........................................................... 187

MIDI Messages of the Electone ............................... 188

MIDI Channels ......................................................... 189

MIDI Control ..................................................................... 190

Connecting to an iPhone/iPad.......................................... 192

Wireless LAN settings .............................................. 192

Wireless LAN Detailed Settings ............................... 198

Initialize the wireless LAN settings........................... 200

Glossary of Terms .................................................... 201

11 Appendix 202

Assembly Instructions ...................................................... 202

Troubleshooting................................................................ 206

Specifications ................................................................... 209

Index................................................................................. 211

1

2

3

4

5

6

7

8

9

10

11

Quick Introductory

Guide

Basic Operation

Voices

Voice Controls

and Effects

Rhythm/Keyboard

Percussion

Registration

Memory

Music Data

Recorder (MDR)

Audio

Footswitches

Transpose and

Pitch Controls

Connections

Appendix

12

ELB-02 Owner’s Manual

Main Features

The Registration Menu buttons feature a total of 601 Registrations, allowing you to instantly set up the

Electone for playing your favorite type of music. The Registrations in Registration Menu are divided into six

basic categories for ease of selection. Moreover, you can edit any of the Registrations and customize them to fit

your own performance needs.

The ELB-02 contains a huge amount of exceptionally high-quality Voices—540 altogether—created with the

AWM (Advanced Wave Memory) tone generation system, including special Super Articulation Voices, which

realistically recreate characteristic instrument sounds. With highly playable keyboards featuring authentic

touch response—with Initial Touch and After Touch functions—you can play these Voices with all the

expressiveness and control of an actual acoustic instrument. What’s more, there is a wide variety of effect types

that you can apply to each Voice section—letting you enhance and even completely change the character of the

Voic es.

The exceptionally wide selection of various rhythms lets you choose exactly the rhythm you need in your

performance. Each rhythm contains 15 variations (sections) —such as Main, Fill In, Intro, Ending, and

Break—that you can easily switch while you play, to make your performance even more dynamic and

professional. Each rhythm has its own matching accompaniment divided into five instrument parts, providing

basic backing as well as embellishments.

This powerful feature allows you to play drum and percussion sounds from the keyboard. A wide range of

sounds and drum/percussion kits are available, for performing rhythms in real time. Each sound is assigned to

its own key, and the sounds include everything from conventional kicks and snares to a wide variety of ethnic

and Latin instruments, as well as special sound effects, such as thunder, laughing, animal cries and more.

The Electone also features a Music Data Recorder (MDR) for recording your Registrations and performances

to a USB flash drive, and playing back those performances using the sounds of the Electone. In addition, the

MDR allows you to copy a Song from one USB flash drive to another, letting you archive your important

recordings and Registration data.

You can record your performances as audio data (.WAV) to a USB flash drive. Since the data is saved in stereo

WAV format of normal CD quality resolution (44.1kHz/16bit), it can be transmitted to and played on portable

music players by using a computer, allowing you to share your recordings with your friends, and make your

own CDs to enjoy as well.

Wide Variety of Registration Menus

page 20

Richly textured, AWM Voices, Touch functions and High Quality

Digital Effects

pages 29, 52

Dynamic, Contemporary Rhythms and Auto Accompaniment

page 68

Keyboard Percussion

page 88

Versatile Functions of the Music Data Recorder

page 127

Audio Recording

page 169

13

ELB-02 Owner’s Manual

Panel Controls and Terminals

Overview

Music Rest

page 8

Front Panel

[AUX IN] jack

page 182

AUX OUT [L/L+R]/

[R] jack

page 182

[PHONES] jack

page 182

Speaker

Upper Keyboard

page 29

[USB TO DEVICE] terminal

page 183

Lower Keyboard

page 29

MIDI terminals

page 183

[USB TO DEVICE] terminal

page 183

[USB TO HOST] terminal

page 183

[AC IN] jack

For connecting a power

cord. page 16

Right Footswitch

page 121

Left Footswitch

page 177

Expression Pedal

page 17

Pedalboard

page 29

14

ELB-02 Owner’s Manual

Front Panel

Panel Setup (Panel Settings)

By using the controls on the panel, you can make various settings such as selecting a Voice or Style, tuning the pitch, and so on. These settings

of the instrument are together referred to as “panel setup” or “panel settings” in this manual.

C1 D1 E1 F1 G1 A1 B1 C2 D2 E2 F2 G2 A2 B2 C3

C2 D2 E2 F2 G2 A2 B2 C3

MUSIC DATA RECORDER (MDR)

Allows recording and playback of

your keyboard performances, and

lets you store Registration data for

future recall (page 127).

[VOICE SECTION 2]

button

Switches between Voice

sections 1 and 2 (page 33).

UPPER KEYBOARD

VOICE

Selects the Voices

for Upper Keyboard

(page 29).

LEAD VOICE

Selects the Lead Voices for Upper Keyboard

(page 29). Also available on the Lower

Keyboard while “To Lower” function is on.

REGISTRATION MENU

Selects convenient Registrations,

which let you instantly reconfigure

all relevant settings, allowing you

to start playing with all appropriate

sounds pre-selected (page 20).

LCD display

Shows the current

settings of the

Electone (page 25).

SUSTAIN buttons

(page 63)

REVERB buttons

(page 61)

TEMPO buttons

Adjusts the speed

of the rhythm

(page 73).

KEYBOARD

PERCUSSION

Turns Keyboard

Percussion On or

Off (page 88).

RHYTHM

Sets the rhythm

(page 68).

RHYTHM CONTROL

Starts and stops the

rhythm, and adds

changes to the

rhythm (page 71).

Tempo, Bar/Beat

display

Shows the current

tempo or position in the

measure (page 73).

LOWER

KEYBOARD VOICE

Selects the Voices

for Lower Keyboard

(page 30).

PEDAL VOICE

Selects the Voices for Pedalboard

(page 30). Also available on the

Lower Keyboard while “To Lower”

function is on.

15

ELB-02 Owner’s Manual

D3 E3 F3 G3 A3 B3 C4 D4 E4 F4 G4 A4 B4 C5

D3 E3 F3 G3 A3 B3 C4 D4 E4 F4 G4 A4 B4 C5 D5 E5 F5 G5 A5 B5 C6

Display Select

[VOICE DISPLAY] button

(page 31)

[A.B.C./M.O.C.] button

(page 82)

[FOOTSWITCH] button

(page 177)

[MDR] button (page 127)

[AUDIO] button

(page 169)

[UTILITY] button

(page 27)

Page buttons

Selects the Page

of the display

(page 26).

DATA CONTROL dial

Selects the setting or

value in the display

(page 25).

Data Control [A] –

[D] buttons

Selects items and

changes the values/

settings in the

display (page 25).

[9-16] button

(page 112)

[MEMORY] button

(page 111)

REGISTRATION

MEMORY buttons

For registering and

recalling panel

setups (page 111).

[DISABLE] button

(page 114)

MASTER VOLUME

dial

Adjusts the overall

volume (page 17).

[USB TO DEVICE]

terminal

For connecting a

USB flash drive

(page 183).

[] (Standby/On)

switch

Turns the

instrument’s power

on or sets it to

standby (page 16).

16

ELB-02 Owner’s Manual

Quick Introductory Guide

Connect the plugs of the power cord in the order shown in the illustration.

1

Turn down the [MASTER VOLUME] dial counter-clockwise.

2 Press the [ ] (Standby/On) switch to turn the power on.

1

Power Supply

1

2

[AC IN] jack

(page 13)

AC Outlet

The shape of the

plug and outlet

differs depending

on your locale.

WARNING

Use only the supplied

power cord.

CAUTION

When setting up the

product, make sure that

the AC outlet you are using

is easily accessible. If

some trouble or

malfunction occurs,

immediately turn off the

power switch and

disconnect the plug from

the outlet.

NOTE

When disconnecting the

power cord, first turn off the

power, then follow this

procedure in reverse order.

2

Turning On/Off the Power

NOTICE

Do not press any keys or

buttons while turning the

power on. Doing so may

cause the Electone to

malfunction or data loss.

17

ELB-02 Owner’s Manual

Quick Introductory Guide

When you turn on the Electone, the following displays will appear one after the

other on the LCD display:

This last display, Voice Display, shows you the currently assigned voice settings

for each Voice section (page 31).

3 Press and hold the [] (Standby/On) switch for about a second to

turn the power off.

1

Set the MASTER VOLUME control.

The MASTER VOLUME control is an overall control that affects the volume of

the entire instrument.

2 Press the Expression pedal down with your foot.

Once you have set the MASTER VOLUME control to a suitable level, you can

use the Expression pedal to change the volume with your foot as you play.

CAUTION

Even when the []

(Standby/On) switch is in

standby status, electricity

is still flowing to the

instrument at the minimum

level. Remove the electric

plug from the outlet when

the instrument is not to be

used for extended periods

of time, or during electrical

storms.

3

Adjusting the Volume

CAUTION

Do not use the instrument

for a long period of time at

a high or uncomfortable

volume level, since this

can cause permanent

hearing loss.

Decreases the volume Increases the volume

Maximum volume Minimum volume

18

ELB-02 Owner’s Manual

Quick Introductory Guide

You can adjust the contrast of the display.

1

Press the [UTILITY] button on the panel to call up the Utility display.

Since the contrast setting is set in Utility display Page 1, select Page 1 with the

page buttons if another page is shown.

2 Press the [C] button corresponding to “LCD CONTRAST.”

“LCD CONTRAST” is selected and highlighted.

3 Adjust the LCD contrast with the DATA CONTROL dial or by

successively pressing the corresponding button.

You can set the value between -5 – +5.

4

Adjusting the Contrast of the Display

NOTICE

The LCD contrast setting is

automatically saved when

another display is called

up. Make sure to switch to

another display before

turning the power off.

19

ELB-02 Owner’s Manual

Quick Introductory Guide

To use headphones, connect them to the PHONES jack (standard stereo phone jack).

5

Using Headphones

CAUTION

Do not use the

headphones for a long

period of time at a high or

uncomfortable volume

level, since this can cause

permanent hearing loss.

Standard stereo phone plug

20

ELB-02 Owner’s Manual

Basic Operation

The Registration Menu is a simple, highly convenient way to instantly change all the

Electone settings for playing in specific music styles. A Registration consists of panel

settings including the selected Upper Keyboard Voices, Lower Keyboard Voices,

Pedal Voices, the assigned rhythm and so on. Registration Menu button [0] includes

a variety of basic Registrations, especially for practicing, and the other buttons [1] –

[5] include Registrations in various music genres for playing your favorite types of

music. These give you a wide palette of Registrations to choose from, both for

practice purposes and for freely playing in virtually any music style or genre.



Selecting Registrations from the Registration Menu

1 Press one of the REGISTRATION MENU buttons.

Each button has different Registrations for different music genres. For example,

if you want to play Jazz, press the [4] button. For details on the Registration

Menu, see page 22.

2 From this main category, select the specific Registration you want

to use.

Each Registration Menu button actually contains many Registrations. Select the

desired Registrations in sequence by turning the DATA CONTROL dial. You

can also select Registration by using the [A] and [D] buttons located at the

immediate right side of the LCD.

1

Registration Menu

NOTE

Additional basic

Registrations are preset on

the Registration Memory

locations from 1 to 16. See

page 116 for details.

Basic

Page 01 Kids

Page 02 Simple

Pages 01, 02 Pops & Rock

Pages 01, 02 Dance & Ballad

Pages 01, 02 Jazz & Latin

Pages 01, 02 Symphony & World

1

La pagina sta caricando ...

Yamaha ELB-02 Manuale del proprietario

Yamaha ELB-02 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti