Whirlpool WIS 1150 PEL Guida utente

Marca: Whirlpool

Modello: WIS 1150 PEL

Categoria: Lavastoviglie

Tipo: Guida utente

INSTRUCTION FOR USE

ISTRUZIONI PER L’USO

MODE D’EMPLOI

INSTRUCCIONES DE USO

INSTRUÇÃO PARA USO

Instruction for use .................................................................................................................. 3

Instrucciones de uso ......................................................................................................... 16

Mode d’emploi ..................................................................................................................... 29

Istruzioni per l’uso ............................................................................................................... 42

Instrução para uso ............................................................................................................... 55

THANK YOU FOR PURCHASING A WHIRLPOOL PRODUCT.

To receive more comprehensive help and support, please register your product at:

www.whirlpool.eu/register

1 2 3 4 5 6 7 8 9 10

1. Upper rack

2. Cutlery rack

3. Foldable aps

4. Upper rack height adjuster

5. Upper sprayer arm

6. Lower rack

7. Power Clean support

8. Lower sprayer arm

9. Filter Assembly

10. Salt reservoir

11. Detergent and Rinse Aid dispensers

12. Rating plate

13. Control panel

1. ON-OFF button

2. CYCLES 6 buttons for direct access popular cycles

3. EXTRA CYCLES button. Access to other cycles

4. INFO button. Provide info for selected cycle

5. DISPLAY - Indicators area

6. DISPLAY - Information area

7. PREVIOUS button for options/settings

8. OK button. Select/change options and settings

9. NEXT button for options/settings

10. START button

PRODUCT DESCRIPTION

Before using the appliance carefully read Safety Instructions guide.

The control panel of this dishwasher activates pushing by ON/OFF button.

For energy saving the control panel deactivates automatically after 10 minutes if no cycle has started.

CONTROL PANEL

DISPLAY - Indicators

0000 000 00000

Service:

A. START DELAY

B. ECO CYCLE

C. MULTIZONE - Cutlery rack

D. CLOSED WATER TAP

E. ADD SALT

F. MULTIZONE - Upper Rack

G. MULTIZONE - Lower Rack

H. ADD RINSE AID

I. TABLET

A B C

I H G F

After connecting the appliance to the power supply for the rst time,

the display will guide you to set up the appliance for rst use.

1. The language selection

To select preferred language please

press button „<” or „>”.

Conrm by pressing „OK” button.

After language conrmation, the appliance will go through the rst time

use conguration menu.

2. Setting the water hardness

The water hardness is by default

set to level 3. To change water

hardness level press button „<” or „>”

repeatedly.

To conrm your choice press „OK”

button. The level must be set

according to the table below.

To allow the water softener to work in a perfect way, it is essential that

the water hardness setting is based on the actual water hardness in your

house. This information can be obtained from your local water supplier.

3. Filling the water softener

When water hardness is set, it is

required to ll water softener with

water and special regeneration salt.

Remove the lower rack and unscrew

the reservoir cap (anticlockwise)

As a rst step it is needed to ll

reservoir with water ( ~1.5 litres).

Once done, proceed to the next

step by pressing „OK” button.

Position the funnel (see gure) and ll the salt reservoir right up to its

edge (approximately 1 kg); it is not unusual for some water will spill out.

Remove the funnel and wipe any salt residue away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get

into the container during the wash program (this could damage the

water softener beyond repair).

Once done, proceed to the next step by pressing „OK” button.

Only use salt that has been specically designed for dishwashers.

4. Setting the brightness level

The brightness level is by default set

to level 5. To change brightness level

press button „<” or „>” repeatedly.

To conrm Uour choice press „OK”

button.

5. Detergent type operation

In this step it is very important to

choose what type of detergent will

be used (tablet/capsule or

gel/powder).

If you prefer to use All-in-one

detergent in tablet or capsule for

washing - press „OK”, then go to

step 7. Open tap operation on the

next page.

The symbol on display will be lit. If you prefer to use gel or

powder detergent for washing, press „<” or „>”, then go to step

6. Rinse aid operation.

6. Rinse aid operation*

*If All-in-one detergent was chosen in the previous step, this step will

be skipped by the appliance.

LANGUAGE: ENGLISH?

<> = CHANGE OK = YES

ENGLISH

SELECTED

WATER HARDNESS = 3

<> = CHANGE OK = YES

WATER HARDNESS

(1=MIN, 5=MAX)

Water Hardness Table

Level

°dH

German degrees

°fH

French degrees

°Clark

English degrees

1 Soft 0 - 6 0 - 10 0 - 7

2 Medium 7 - 11 11 - 20 8 - 14

3 Average 12 - 16 21 - 29 15 - 20

4 Hard 17 - 34 30 - 60 21 - 42

5 Very hard 35 - 50 61 - 90 43 - 62

POUR WATER

OPERATION

INSERT 1,5 LITER OF

OK = DONE

WATER IN THE

OK = DONE

WATER SOFTENER

OK = DONE

INSERT SALT

OPERATION

ADD 1KG OF SALT

OK = DONE

IN THE SALT DISPENSER

OK = DONE

ADJUST BRIGHTNESS

(1=MIN, 5=MAX)

BRIGHTNESS = 5

<> = CHANGE OK = YES

DETERGENT TYPE

OPERATION

DO YOU USE

<> = NO OK = YES

DETERGENT?

<> = NO OK = YES

“ALL IN ONE”

<> = NO OK = YES

RINSE AID

OPERATION

INSERT RINSE AID

OK = DONE

IN THE DISPENSER

OK = DONE

FIRST TIME USE

Whenever you need to add salt, it is mandatory to complete the pro-

cedure before the beginning of the washing cycle to avoid corrosion.

Residual saline solution or grains of salt can lead to corrosion,

irreparably damaging the stainless steel components.

The guarantee is not applicable if faults are caused by such

circumstances.

If the salt container is not lled, the water softener and the heating

element may be damaged as a result of limescale accumulation.

Using of Salt is recommended with any type of dishwasher detergent.

1. Open the dispenser B by pressing and pulling up the tab on the lid.

2. Carefully introduce the rinse aid as far as the maximum (110 ml) re-

ference notch of the lling space A - avoid spilling it. If this happens,

clean the spill immediately with a dry cloth.

3. Press the lid down until you hear a click to close it.

4. Conrm operation by pressing „OK” button.

NEVER pour the rinse aid directly into the tub.

Setting rinse aid level

(not necessary when using tablets/capsules)

The rinse aid dosage can be adjusted to the detergent used. The lower

the setting, the less rinse aid is dispensed. The factory setting is for (5)

level.

To change, follow instructions in section “SETTINGS / MENU”.

7. Open tap operation

Check water tap is open. If closed, open it then conrm by pressing

„OK” button.

8. First cycle operation

Before normal use of appliance it is

recommended to run Intensive cyc-

le rst, to calibrate the appliance.

Insert a detergent into dispenser

chamber D (see below), then press

„OK” button.

Intensive cycle will be selected

automaticly. Press „START”

button and close the appliance

door within 4 seconds..

This rst cycle can be up to 20

minutes longer as a result of the

automatic calibration process.

After this process the appliance is ready for normal use.

OPEN TAP

OPERATION

OPEN THE

OK = DONE

WATER TAP

OK = DONE

FIRST CYCLE

OPERATION

REMEMBER TO RUN THE

OK = EXIT

INTENSIVE CYCLE

OK = EXIT

WITH EMPTY BASKETS

OK = EXIT

TO COMPLETE

OK = EXIT

THE FIRST SET UP

OK = EXIT

ADDING A DETERGENT

To achieve the best washing and drying results, the combined use of

detergent, rinse aid liquid and rened salt is required.

We recommend using detergents that do not contain phosphates or

chlorine, as these products are harmful to the environment.

Good washing results also depend on the correct amount of deter-

gent being used.

Exceeding the stated amount does not result in a more eective wash

and increases environmental pollution.

The amount can be adjusted to the soil level. In the case of normally

soiled items, use approximately either 35g (powder detergent) or

35ml (liquid detergent) and additional tea spoon of detergent directly

inside the tub. If tablets are used, one tablet will be enough.

If the crockery is only lightly soiled or if it has been rinsed with water

before being placed in the dishwasher, reduce the amount of deter-

gent used accordingly (minimum 25 g/ml) e.g. skip the powder/gel

putted inside the tub.

To open the detergent dispenser,

press button C. Introduce the deter-

gent into the dry dispenser D only.

Place the amount of detergent for

pre-washing directly inside the tub.

1. When measuring out the detergent

refer to the mentioned earlier infor-

mation to add the proper quantity.

Inside the dispenser D there are

indications to help the detergent

dosing.

2. Remove detergent residues from the edges of the dispenser and

close the cover until it clicks.

3. Close the lid of the detergent dispenser by pulling it up until the

closing device is secured in place.

The detergent dispenser automatically opens up at the right time

according to the program.

If you are using a All-in-one detergents, we recommend that you add

salt in any case, especially if the water is hard or very hard (follow the

instructions given on the packaging).

Usage of detergent not designed for dishwashers may cause

malfunction or damage to the appliance.

ADVICE AND TIPS

LOADING THE RACKS

TIPS

Before loading the baskets, remove all food residues from the crockery

and empty the glasses. You do not need to rinse beforehand under

running water.

Arrange the crockery so that it is held in place rmly and does not tip

over; and arrange the containers with the openings facing downwards

and the concave/convex parts placed obliquely, thus allowing the

water to reach every surface and ow freely.

Warning: lids, handles, trays and frying pans do not prevent the spray-

er arms from rotating.

Place any small items in the cutlery basket.

Very soiled dishes and pans should be placed in the lower basket

because in this sector the water sprays are stronger and allow a higher

washing performance.

After loading the appliance, make sure that the sprayer arms can

cotate freely.

UNSUITABLE CROCKERY

• Wooden crockery and cutlery.

• Delicate decorated glasses, artistic handicraft and antique crockery.

Their decorations are not resistant.

• Parts in synthetic material which do not withstand high temperatures.

• Copper and tin crockery.

• Crockery soiled with ash, wax, lubricating grease or ink.

The colours of glass decorations and aluminium/silver pieces can

change and fade during the washing process. Some types of glass (e.g.

crystal objects) can become opaque after a number of wash cycles too.

DAMAGE TO GLASS AND CROCKERY

• Only use glasses and porcelain guaranteed by the manufacturer as

dishwasher safe.

• Use a delicate detergent suitable for crockery

• Collect glasses and cutlery from the dishwasher as soon as the wash

cycle is over.

TIPS ON ENERGY SAVING

• When the household dishwasher is used according to the manufac-

turer’s instructions, washing tableware in a dishwasher usually

consumes less energy and water than hand dishwashing.

• In order to maximize dishwasher eciency it is recommended to

initiate the wash cycle once dishwasher is fully loaded. Loading

the household dishwasher up to the capacity indicated by the man-

ufacturer will contribute to energy and water savings. Information

on correct loading of tableware can be found in Loading chapter.

In case of partial loading it is recommended to use dedicated wash

options if available (Half load/ Zone Wash, Multizone), illing up only

selected racks. Incorrect loading or overloading the dishwasher may

increase resources usage (such as water, energy and time, as well as

increase noise level), reducing cleaning and drying performance.

• Manual pre-rinsing of tableware items leads to increased water and

energy consumption and is not recommended.

HYGIENE

To avoid odour and sediment which can be accumulated in the

dishwasher please run a high temperature program at least once a

month. Use a tea spoon of detergent and run it without the loading to

clean your appliance.

CUTLERY RACK

The third rack was designed

tohouse the cutlery.

Arrange the cutlery as shown in

the gure.

A separate arrangement of the

cutlery makes collection easier

after washing and improves wa-

shing and drying performance.

Knives and other utensils with sharp edges must be positioned

with the blades facing downwards.

The geometry of the rack makes

it possible to place such small

items as coee cups in the area

in the middle.

The cutlery basket is equipped

with two sliding side trays to

make the most of the height of

the space below and enable the

loading of high items into upper

rack.

UPPER RACK

Load delicate and light dishes:

glasses, cups, saucers, low salad

bowls.

The upper rack has tip-up

supports which can be used in a

vertical position when arranging

tea/ dessert saucers or in a lower

position to load bowls and food

containers.

(loading example for the upper rack)

FOLDABLE FLAPS WITH ADJUSTABLE POSITION

The side foldable aps can be fold or

unfold to optimize the arrangement of

crockery inside the rack. Wine glasses

can be placed safely in the foldable

aps by inserting the stem of each

glass into the corresponding slots.

Depending on the model:

• to unfold the aps there is needed

to slide it up and rotate or release it

from the snaps and pull it down.

• to fold the aps there is needed

to rotate it and slide aps down or

pull it up and attach aps to the snaps.

ADJUSTING THE HEIGHT OF THE UPPER RACK

The height of the upper rack can be adjusted: high position to place

bulky crockery in the lower basket and low position to make the most

of the tip-up supports by creating more space upwards and avoid

collision with the items loaded into lower rack.

The upper rack is equipped with a Upper Rack

height adjuster (see gure), without pressing

the levers, lift it up by simply holding the rack

sides, as soon as the rack is stable in its upper

position.

To restore to the lower position, press the levers

A at the sides of the rack and move the basket

downwards.

We strongly recommend that you do not ad-

just the height of the rack when it is loaded.

NEVER raise or lower the basket on one side

only.

LOWER RACK

For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids

should ideally be placed at the sides to avoid interferences with the

spray arm.

The lower rack has tip-up supports which can be used in a vertical

position when arranging plates or in a horizontal position (lower) to

load pans and salad bowls easily.

(loading example for the lower rack)

GLASS CARE

Dedicated accessory that

allows you to safely store

dierent types of stem

glasses in the lower rack.

It enables cleaning &

drying results by allowing

an optimised and stable

positioning of the glasses.

POWER CLEAN IN LOWER RACK

Power Clean® uses the special water jets

in the rear of cavity to wash more inten-

sively the high dirty items.

Placing the pots/casseroles faced to the

Power Clean® component please activa-

te the POWER CLEAN on the panel.

The lower rack has a Power Clean, a special pull-out support in the rear

of the rack that can be used to support frying pans or baking pans in

upright position, thus taking up less space.

How to use Power Clean®:

1. Adjust the Power Clean® area (G)

folding down the rear plate holders

to load pots.

2. Load pots and casseroles inclined

vertically in Power Clean® area. Pots

have to be inclined towards the

power water jets.

SELECTING A CYCLE AND OPTIONS

The list of available cycles and options can be found in Cycles Table

on next page. Eco cycle is selected by default. If you want to have Last

Used cycle selected by default, you can change it in „Settings Menu”.

It is possible to select a cycle by pressing 1 of 6 cycles direct access

buttons or by pressing „Extra Cycles” button repeatedly. When the

last one is reached a further press goes back to the rst.

Press cycle button to choose cycle in accordance with the level

of soiling of the dishes and with Cycles Table. Information will be

shown on the display:

1. Indicators

2. Name of the selected cycle

3. Vertical bar showing the position of the extra cycle list only

4. Energy consumption of the selected cycle

5. Water consumption of the selected cycle

Three seconds after selecting a cycle, its

time and temperature will be displayed

(if available).

Press „INFO” button to display a brief description of the cycle and

its water / energy consumption.

During the selection phase the „START” LED blinks.

Additional options are available for most cycles (see „Options and

Settings” section). When any option is selected, its name is shown on

the display on the right.

If more than one option is selected one

bullet point for each option is displayed.

Each option name is displayed for 3 sec.

with its bullet point fulled.

When the cycle and option selection is complete, press „START”

button and close the door within 4 seconds to start chosen cycle.

After the cycle nishes, there is an acustic signal and the dispaly

shows:

On the display additional information can be shown:

• ADD SALT - rell salt reservoir.

• ADD RINSE AID - rell rinse aid.

• DEGREASE AND CLEAN MACHINE WE RECOMMEND WPRO - every 50

cycle, will be recommended to use the WPRO cleaner (according to

instruction on the consumable).

After 10 minutes the appliance switches o.

WATER SOFTENING SYSTEM

Water softener automatically reduces water hardness, consequently

preventing scale buildup on heater, contributing also to better cleaning

eciency.

This system regenerates itself with salt, therefore it is required to

rell salt container when empty.

Frequency of regeneration depends on water hardness level setting -

regeneration takes place once per 6 Eco cycles with water hardness

level set to 3.

Regeneration process starts in nal rinse and nishes in drying phase,

before cycle ends.

• Single regeneration consumes: ~3.5L of water;

• Takes up to 5 additional minutes for the cycle;

• Consumes below 0.005kWh of energy.

NORMALLY SOILED CROCKERY.

STANDARD PROGRAM,

WATER ENERGY

POWER

CLEAN

50° 3:20h

MODIFYING A RUNNING PROGRAM

If a wrong program was selected, it is possible to change it, provided

that it has only just begun: open the door, press and hold the

„ON/OFF” button, the machine will switch o.

Switch the machine back on using the „ON/OFF” button and

select the new wash cycle and any desired options; start the cycle by

pressing the „START” button and closing the door within 4 sec.

TO PAUSE THE CYCLE (ADDING EXTRA ITEMS)

Open the door and place the crockery inside the dishwasher,

(beware of HOT steam!). Press „START” button and close the

door within 4 sec. to resume the cycle from the point at which it was

interrupted.

ACCIDENTAL INTERRUPTIONS

If the door is opened during the wash cycle, or if there is a power

cut, the cycle stops. To resume the cycle from where it was interrup-

ted, press the „START” button and close the door within 4 sec.

CYCLE FINISHED

Open appliance door (beware of hot steam!) and unload the racks,

starting from the lower rack rst.

If it is needed to rell salt reservoir or rinse aid dispenser, it is recom-

mended to do this operations right before start of the next cycle.

POWER

CLEAN

50° 3:20h

ECO CYCLE

1 2 3

CYCLES TABLE

CYCLE Available options *

Drying

phase

Natural-

Dry

Duration of

wash cycle

(h:min)

Water

consumption

(l/cycle)

Energy

cosumption

(kWh/cycle)

ECO

50°

TABLET, START DELAY, POWER CLEAN

3:20 9.5 0.64

6TH SENSE

50-60°

TABLET, START DELAY, MULTIZONE,

POWER CLEAN, TURBO

1:25 - 3:00 7.0 - 14.0 0.90 - 1.40

INTENSIVE

65°

TABLET, START DELAY, MULTIZONE,

POWER CLEAN, TURBO

2:50 16.0 1.60

MIXED

60°

TABLET, START DELAY, MULTIZONE

2:30 16.0 1.30

FAST WASH&DRY

50°

TABLET, START DELAY, MULTIZONE

1:25 11.5 1.10

CRISTALS

45°

TABLET, START DELAY, MULTIZONE

1:40 11.5 1.20

EXTRA CYCLES - available by pressing button

RAPID 30’ 50°

TABLET, START DELAY, MULTIZONE

- - 0:30 9.0 0.50

SILENT 50°

TABLET, START DELAY

3:30 15.0 1.15

SANITIZING 65°

START DELAY

1:40 10.0 1.30

PRE-WASH cold

START DELAY, MULTIZONE

- - 0:12 4.5 0.01

SELF CLEAN 65°

START DELAY

- -

0:50 8.0 0.85

1. ECO - Eco programme is suitable to clean normally soiled tableware, that for this use, it is the most ecient programme in terms of its com-

bined energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.

2. 6TH SENSE - For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program accordingly.

3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).

4. MIXED - Mixed soil. For normally soiled dishes with dried food residues.

5. FAST WASH&DRY - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning performance in shorter time.

6. CRISTALS - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups..

EXTRA CYCLES

7. RAPID 30’ - Program to be used for half load of lightly-soiled dishes with no dried food residues. Does not include drying phase.

8. SILENT -

Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission.

9. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the dishwasher.

10. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program

11. SELF CLEAN - Program to be used to perform maintenance of the dishwasher, to be carried out only when the dishwasher is EMPTY using

specic detergents designed for dishwasher maintenance.

Notes:

Please note that cycle Rapid 30’ is dedicated for lightly soiled dishes.

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.

Note for Test Laboratories: for information on comparative EN testing conditions, please send an email to the following address: [email protected]

Pre-treatment of the dishes is not needed before any of the programs.

* Not all options can be used simultaneously.

** Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature

and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options

and sensor calibration. The sensor calibration can increase program duration up to 20 min.

OPTIONS AND SETTINGS

TABLET (All-in-one)

This setting allows you to optimise the performance of the cycle

according to the type of detergent used. Enable it if you use combined

detergents in tablet form (rinse aid, salt and detergent in 1 dose).

To set the Tablet, enter in the setting

menu by pressing „OK” button and

navigate with „< , >” until „TABLET”

is shown, then press „OK” button.

START DELAY

The start of the cycle may be delayed for a selected period of time.

To set a delay, enter in the setting menu by pressing „OK” button and na-

vigate with „< , >” until „START DELAY” is shown, then press „OK” button.

With each press of the button “>” or “<“, the delay start increases by:

• every 0:30 if selection below 4 hours,

• every 1:00 if selection is below 12 hours,

• every 2 hours if selection is above 12 hours.

Default value is OFF.

If delay is selected, the is lit.

Once „OK” button is pressed the

delay is conrmed and the machine

comes back to the cycle selection

screen with delay value visible.

Press „START” button and close the door within 4 sec. to start the delay.

To remove the delay, press „<” or „>” button until „OFF” is displayed.

MULTIZONE

If there are not many dishes to be washed it can be loaded in one rack

only. Using this option you can select which rack you want to wash.

To set the Multizone, enter in the setting menu by pressing „OK”

button and navigate with „< , >” until „MULTIZONE” is shown, then

press „OK” button.

By default the MULTIZONE is not

active and all racks icons are lit.

The multizone icon becomes lit.

Remember to load the upper or lower rack only, and to reduce

the amount of detergent accordingly.

If upper rack is removed, please apply detergent directly to tub

instead of detergent dispenser.

POWER CLEAN

Thanks to additional water jets this option provides a more intensive

and powerful wash in the specic area of lower rack.

Default value is OFF.

To set the Power Clean, enter in

the setting menu by pressing „OK

button and navigate with „< , >”

until „POWER CLEAN” is shown,

then press „OK” button.

TURBO

This option can be used to reduce the duration of the main cycles

while maintaining washing and drying performance levels.

To set the Turbo, enter in the setting

menu by pressing „OK” button and

navigate with „< , >” until „TURBO”

is shown, then press „OK” button.

With each press of the button

„>” or „<“ option will be ON or OFF.

Conrm by pressing „OK” button.

FLOOR LIGHT

A LED light projected on the oor indicates that the dishwasher is

working. The light stays on during the cycle and switches o at the

end of the cycle.

This feature is active by default, but it is possible to deactivate it in the

“SETTINGS MENU”.

TUB LIGHT

When the feature is active the LEDs in the tub are automatically

switched on/o as soon as the user open/close the door respectively.

If the door remains opened for more than 10 min, the LEDs in the

tub switch o (to turn them on again, the door has to be closed and

opened again).

This feature is active by default, but it is possible to deactivate it in the

“SETTINGS MENU”.

TABLET OFF

TABLET ON

START DELAY OFF

<STARTS IN h> OFF

<STARTS IN h> 4:00

MULTIZONE OK

POWER CLEAN OFF

POWER CLEAN ON

TURBO OFF

TURBO ON

With each cycle additional options can be used. A full list of available options working with specic cycles can be found in the Cycles Table on

the previous page. All active options are shown on the display.

To set an option press „OK” button. SET OPTIONS message is shown for a few seconds. Then use „<” or „>” button to navigate through the

option list. Press „OK” to select the option, in the setting menu the LED above „OK” button is lit.

If the option is not available, it will be still visible in its position but with „ ”

SETTINGS MENU

Language

To change language, enter in the

setting menu by pressing „OK”

button and navigate with „< , >”

until „LANGUAGE” is shown, then

press „OK” button.

First cycle

You can choose which cycle is

selected by default when switching

on the appliance: ECO or the LAST

USED one.

To change rst cycle, enter in the

setting menu by pressing „OK” but-

ton and navigate with „< , >” until

„FIRST CYCLE” is shown, then press

„OK” button.

Sounds

To change sounds, enter in the

setting menu by pressing „OK”

button and navigate with „< , >”

until „SOUNDS” is shown, then press

„OK” button.

Choose between 2 levels: High;

Low. Can be also OFF.

Water Hardness

To change water hardness level,

enter in the setting menu by

pressing „OK” button and navigate

with „< , >” until „WATER HARDNESS”

is shown, then press „OK” button.

To setup correct level according to water hardness, see table on page 4.

Screen Brightness

To change screen brightness

level, enter in the setting menu by

pressing „OK” button and navigate

with „< , >” until „SCREEN BRIGHT.” is

shown, then press „OK” button.

Choose between ve levels: 1, 2, 3, 4 and 5.

Floor Light

To change oor light, enter in the

setting menu by pressing „OK”

button and navigate with „< , >”

until „FLOOR LIGHT” is shown, then

press „OK” button.

Tub Light

To change tub light, enter in the

setting menu by pressing „SET”

button and navigate with „< , >”

until „TUB LIGHT” is shown, then

press „OK” button.

NaturalDry

To change tub light, enter in the

setting menu by pressing „SET”

button and navigate with „< , >”

until „NATURALDRY” is shown, then

press „OK” button.

NaturalDry is a convection drying system which automatically opens

the door during/after drying phase to ensure exceptional drying per-

formance every day. Door opens at the temperature that is safe to your

kitchen furniture, thus door will not be opened when the option of

TURBO is on.

As additional steam protection, special designed protection foil is added

together with the dishwasher. To see how to mount protection foil

please refer to (INSTALLATION GUIDE).

Rinse Aid level

To change rinse aid level, enter in

the setting menu by pressing „OK”

button and navigate with „< , >”

until „RINSE AID LEV.” is shown, then

press „OK” button.

Choose between ve levels: 1, 2, 3, 4 and 5.

If the rinse aid level is set to 1, no rinse aid will be supplied. The LOW

RINSE AID indicator light will not be lit if you run out of rinse aid.

The factory setting is for (5) level .

• If you see bluish streaks on the dishes, set a low number (2-3).

• If there are drops of water or limescale marks on the dishes, set

a high number (4-5).

Demo mode

To see to demo mode, enter in the

setting menu by pressing „OK”

button and navigate with „< , >”

until „DEMO MODE” is shown, then

press „OK” button.

Reset to factory default

To reset to factory default, enter in

the setting menu by pressing „OK”

button and navigate with „< , >”

until „RESET TO DEF.” is shown, then

press „OK” button.

Exit

To exit the setting menu, press any

cycle button or press „< , >” button

untill EXIT is shown, then press

„OK” button.

1.LANGUAGE OK

1.ENGLISH

1.ITALIANO < >

2.FIRST CYCLE OK

2.<ECO> < >

3.SOUNDS OK

3.<OFF>

3.<HIGH> < >

4.WATER HARDNESS 3

4.WATER HARDNESS 4

5.SCREEN BRIGHT. 5

5.SCREEN BRIGHT. 3

7.TUB LIGHT ON

7.TUB LIGHT OFF

8.NATURALDRY ON

8.NATURALDRY OFF

9.RINSE AID LEV. 5

9.RINSE AID LEV. 4

10.DEMO MODE SET

10.DEMO MODE OFF

11.RESET TO DEF. OK

11.OFF

11.ON < >

12.EXIT < >

To change machne settings you need to enter into the Settins Menu.

Press „OK” button and navigate with „< , >” until SETTINGS is shown, then press „OK” button.

To exit the setting menu, press any cycle button or press „< , >” button untill EXIT is shown, then press „OK” button.

2.<LAST USED>

6.FLOOR LIGHT ON

6.FLOOR LIGHT OFF

CARE AND MAINTENANCE

ATTENTION: Always unplug the appliance when cleaning it and when

performing maintenance work.Do not use ammable liquids to clean

the machine.

CLEANING THE DISHWASHER

Any marks on the inside of the appliance may be

removed using a cloth dampened with water and a

little vinegar.

The external surfaces of the machine and the control

panel can be cleaned using a non-abrasive cloth

which has been dampened with water. Do not use

solvents or abrasive products.

PREVENTING UNPLEASANT ODOURS

Always keep the door of the appliance ajar in order to avoid moisture

from forming and being trapped inside the machine.

Clean the seals around the door and detergent dispensers regularly

using a damp sponge. This will avoid food becoming trapped in the se-

als, which is the main cause behind the formation of unpleasant odours.

CHEKING THE WATER SUPPLY HOSE

Check the inlet hose regularly for brittleness and cracks. If damaged,

replace it by a new hose available through our After-Sales Service or

your specialist dealer. Depending on the hose type:

If the inlet hose has a transparent coating, periodically check if the

colour intensies locally. If yes, the hose may have a leak and should

be replaced.

For water stop hoses: check the small safety valve inspection window

(see arrow). If it is red, the water stop function was triggered, and the

hose must be replaced by a new one.

For unscrewing this hose, press the release button while unscrewing

the hose.

CLEANING THE WATER INLET HOSE

If the water hoses are new or have not been used for an extended

period of time, let the water run to make sure it is clear and free of im-

purities before performing the necessary connections. If this precau-

tion is not taken, the water inlet could become blocked and damage

the dishwasher.

CLEANING THE FILTER ASSEMBLY

Regularly clean the lter assembly so that the lters do not clog and

that the waste water ows away correctly.

Using dishwasher with clogged lters or foreign objects inside ltration

system or sprayarms may cause unit malfunction resulting in lose of

performance, noisy work or higher resources usage.

The lter assembly consists of three lters which remove food residues

from the washing water and then recirculate the water.

The dishwasher must not be used without lters or if the lter is

loose.

At least once per month or after each 30 cycles, check the lter assembly

and if necessary clean it thoroughly under running water, using a non-

-metallic brush and following the instructions below:

1. Turn the cylindrical lter A in an anti-clockwise direction and pull it

out (Fig 1).

2. Remove the cup lter B by exerting a slight pressure on the side

aps (Fig 2).

3. Slide out the stainless-steel plate lter C (Fig 3).

4. In case you nd foreign objects (such as broken glass, porcelain,

bones, fruit seeds etc.) please remove them carefully.

5. Inspect the trap and remove any food residues. NEVER REMOVE

the wash-cycle pump protection (black detail) (Fig 4).

After cleaning the lters, re-place the lter assembly and x it in po-

sition correctly; this is essential for maintaining the ecient operation

of the dishwasher.

CLEANING THE SPRAY ARMS

On occasions, food residue may be-

come encrusted onto the spray arms

and block the holes used to spray

the water. It is therefore recommen-

ded that you check the arms from

time to time and clean them with a

small non-metallic brush.

To remove the upper spray arm,

turn the plastic locking ring in an

anti-clockwise direction. The upper

spray arm should be replaced so that the side with the greater number

of holes is facing upwards.

The lower spray arm may be remo-

ved by pulling it upwards.

INSTALLATION

ATTENTION: If the appliance must be moved at any time, keep it in an

upright position; if absolutely necessary, it may be tilted onto its back.

CONNECTING THE WATER SUPPLY

Adaptation of the water supply for installation should only be perfor-

med by a qualied technician.

The water inlet and outlet hoses may be positioned towards the right

or the left in order to achieve the best possible installation.

Make sure the dishwasher does not bend or squash the hoses.

CONNECTING THE WATER INLET HOSE

• Run the water until it is perfectly clear.

• Screw the inlet hose tightly into position and turn on the tap.

If the inlet hose is not long enough, contact a specialist store or an

authorised technician.

The water pressure must be within the values indicated in the Techni-

cal Data table - otherwise the dishwasher may be function properly.

Make sure the hose is not bent or compressed.

SPECIFICATIONS FOR THE CONNECTION OF THE WATER SUPPLY HOSE:

CONNECTING THE WATER OUTLET HOSE

Connect the outlet hose to a drain duct with a minimum diameter of

2 cm A.

The outlet hose connection must be at a height ranging from 40 to

80 cm from the oor or surface where the dishwasher rests.

Before connecting the water outlet hose to the sink drain, remove the

plastic plug B.

ANTI-FLOODING PROTECTION

Anti-ooding protection. To ensure oods do not occur, the dishwasher:

- is provided with a special system which blocks the water supply in

the event of anomalies or leaks from inside the appliance.

Some models are also equipped with the supplementary safety device

New Aqua Stop, which guarantees anti-ooding protection even in

the event of a supply hose rupture.

Under no circumstances should the water inlet hose be cut as it conta-

ins live electrical parts.

ELECTRICAL CONNECTION

WARNING: Under no circumstances should the water inlet hose

be cut as it contains live electrical parts.

Before inserting the plug into the electrical socket, make sure that:

• The socket is earth and complies with current regulations;

• The socket can withstand the maximum load of the appliance as

shown on the data plate located on the inside of the door (see

PRODUCT DESCRIPTION).

• The power supply voltage falls within the values indicated on the

data plate on the inside of the door.

• The socket is compatible with the plug of the appliance.

If this is not the case, ask an authorised technician to replace the plug

(see AFTER-SALES SERVICE). Do not use extension cables or multiple

sockets. Once the appliance has been installed, the power supply

cable and the electrical socket should be easily accessible.

The cable should not be bent or compressed.

If the power supply cable is damaged, have it replaced by the ma-

nufacturer or its authorised Technical Assistance Service in order to

prevent all potential hazards.

The Company shall not be held responsible for any incidents, if these

regulations are not observed.

POSITIONING AND LEVELLING

1. Position the dishwasher on a level sturdy oor. If the oor is uneven,

the front feet of the appliance may be adjusted until it reaches

a horizontal position. If the appliance is levelled correctly, it will be

more stable and much less likely to move or cause vibrations and

noise while it is operating.

2. Before recessing the dishwasher, stick the adhesive transparent strip

under the wooden shelf in order to protect it from any condensation

which may form.

3. Place the dishwasher so that its sides or back panel are in contact

with the adjacent cabinets or the wall. This appliance can also be

recessed under a single worktop.

4. To adjust the height of the rear foot, turn the red hexagonal bushing

on the lower central part at the front of the dishwasher using a

hexagonal spanner with an opening of 8 mm. Turn the spanner in

a clockwise direction to increase the height and in an anticlockwise

direction to decrease it.

DIMENSIONS AND CAPACITY:

MIN 40 cm

MAX 80 cm

WATER SUPPLY cold or hot (max. 60°C)

WATER INTAKE 3/4”

POWER OF WATER PRESSURE

0,05 ÷ 1 MPa (0.5 ÷ 10 bar)

7,25 – 145 psi

WIDTH 598 mm

HEIGHT 820 mm

DEPTH 555 mm

CAPACITY 14 standard place-settings

TROUBLESHOOTING

PROBLEMS POSSIBLE CAUSES SOLUTIONS

Display shows:

CHECK SALT! or

ADD SALT

Salt reservoir is empty.

Rell reservoir with salt (see page 4).

Adjust water hardness (see page 4).

Display shows:

CHECK RINSE AID! or

ADD RINSE AID

Rinse aid dispenser is empty. Rell dispenser with rinse aid (see page 4).

... is not working / will not

start.

The appliance must be switched on. Check the household circuit fuse if there is no power supply.

The appliance door doesn’t close. Check if the appliance door is closed.

“Start Delay” option is ON.

Check whether the „Start Delay” option has been selected. If it has, the

appliance will start once the set time has elapsed. If necessary, Reset the

current cycle by switching OFF the dishwasher, then switch it on again,

select a new cycle, press START and close the door within 4 seconds

Display shows: F6

symbol on the display

indicators

Water pressure is too low.

The water tap must be fully open during water inlet (minimum capaci-

ty: 0.5 litres per minute).

Kinked water inlet hose or cloged

inlet lters.

The water inlet hose must not be kinked and the inlet lter in the water

tap connector must not be dirty or clogged.

Display shows: F3

Dirty lters. Clean the lters.

Kinked drain hose. The drain hose must not be kinked.

Syphon hose connection closed.

The closure disk of the syphon hose connection

must be removed.

Display shows: F2

Dirty lters or spray arms. Clean lters and spray arms.

Too little water in the appliance

system.

Concave items (e.g. bowls, cups) must be arranged

facing downwards in the rack.

Drain hose incorrectly tted.

The drain hose must be tted correctly (for high mounted appliances,

leave min. 200 - 400mm from the lower edge of the appliance) - see

Installation.

High level of foam inside.

Repeat without detergent or wait until foam

disappears..

Water pressure is too low.

The water tap must be fully open during water inlet (minimum capaci-

ty: 0.5 litres per minute).

Kinked water inlet hose or cloged

inlet lters.

The water inlet hose must not be kinked and the inlet lter in the water

tap connector must not be dirty or clogged.

Display shows:

PRESS START AND

CLOSE THE DOOR

Door is not closed within

4 seconds of button press.

Press again and close the appliance door within 4 seconds.

Display shows:

OPEN AND CLOSE

THE DOOR

The door was not open between

cycles.

Unload appliance (if not unloaded before), open and close the door.

Display shows: Fx

Appliance has technical defect.

Call customer service (state fault displayed).

Close the water tap.

In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list.

For other errors or issues please contact authorized After-sales Service which contact details can be found in the warranty booklet.

The manufacturer ensures the availability of spare parts for at least 10 years after production date of this appliance.

PROBLEMS POSSIBLE CAUSES SOLUTIONS

The door doesn’t

lock.

Racks are not t to the end. Verify that racks are t to the end.

The door is not lock. Vigorously push the door until you hear the “clack” sound.

The dishwasher

makes excessive

noise.

The dishes are rattling against each. Arrange the crockery correctly (see Loading the Racks).

An excessive amount of foam has been

produced.

The detergent has not been measured out correctly or it is not suitable for

use in dishwashers (see Filling the Detergent Dispenser). Reset the current

cycle by switching OFF the dishwasher, then switch it on again, select a

new program, press START and close the door

within 4 seconds

. Please do

not add any detergent.

The dishes have not

been dried.

The selected program hasn’t any drying

phase.

Verify on the programs table if the selected program has the drying phase.

The rinse aid has run out or the resolution

is not adequate.

Add the rinse aid or adjust the dosage levels higher (see Filling the Rinse

Aid Dispenser).

The dishes are made of non-stick or

plastic.

It is normal the presence of drops of water (see Tips).

The dishes are not

clean.

The crockery has not been arranged

properly.

Arrange the crockery correctly (see Loading the Racks).

The spray arms cannot rotate freely, being

hindered by the dishes.

Arrange the crockery correctly (see Loading the Racks).

The wash cycle is too gentle and/or deter-

gent eciency is low.

Select an appropriate wash cycle (see Programs Table).

An excessive amount of foam has been

produced (see AFTER-SALES SERVICE).

The detergent has not been measured out correctly or it is not suitable for

use in dishwashers (see Filling the Detergent Dispenser). Reset the current

cycle by switching OFF the dishwasher, then switch it on again, select a

new program, press START and close the door

within 4 seconds

. Please do

not add any detergent.

The cap on the rinse aid compartment has

not been shut correctly.

Make sure the cap of the rinse aid dispenser is closed.

The lter is soiled or clogged. Clean the lter assembly (see Care and Maintenance).

There is no salt. Fill the salt reservoir (see Filling the Salt Reservoir).

The dishes and glas-

ses show calcination

or a whitish lm.

The salt level is too low. Fill the salt reservoir (see Filling the Salt Reservoir).

The adjustment of the water hardness is

not adequate.

Increase the values (see Water Hardness Table).

The cap of the salt reservoir is not proper-

ly closed.

Check to have properly closed the salt reservoir cap.

The rinse aid is used up or the dosage is

insucient.

Add the rinse aid or adjust the dosage levels higher.

The dishes and

glasses are blue

streaked or have

a bluish tinge.

The rinse aid dosage is excessive. Adjust the dosage rates below.

Policy and standard documentation and additional product information can be found by:

• Visiting our website docs.whirlpool.eu

• Using QR Code

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet).

When contacting our After-sales Service, please state the codes provided on your product‘s

identication plate.

The model information can be retrieved using the QR-Code reported in the energy label.

The label also includes the model identier that can be used to consult the portal of the registry

at https://eprel.ec.europa.eu (available only on certain models).

IEC 436

GRACIAS POR COMPRAR UN PRODUCTO WHIRLPOOL.

Si desea recibir un servicio más completo, registre su aparato en:

www.whirlpool.eu/register

1. Cesta superior

2. Bandeja para cubiertos

3. Sujeciones plegables

4. Ajustador de altura de la bandeja superior

5. Brazo aspersor superior

6. Cesta inferior

7. Soporte Power Clean

8. Brazo aspersor inferior

9. Conjunto de ltrado

10. Depósito de sal

11. Dispensadores de detergente y abrillantador

12. Placa de características

13. Panel de control

DESCRIPCIÓN DEL PRODUCTO

Antes de usar el electrodoméstico, lea atentamente las Instrucciones de seguridad.

El panel de control de este lavavajillas se activa pulsando el botón de Encendido/Apagado.

Por razones de ahorro de energía, el panel de control se apaga automáticamente después de 10 minutos si no se

inicia un ciclo.

PANEL DE CONTROL

1. Botón Encendido/Apagado

2. 6 botones de CICLOS para acceder directamente a los ciclos más usados

3. Botón CICLO EXTRA. Acceso a otros ciclos

4. Botón INFO. Proporcionar información para el ciclo seleccionado.

5. PANTALLA - Zona de indicadores

6. PANTALLA - Zona de información

7. Botón ANTERIOR para opciones/ajustes

8. Botón OK. Seleccionar/cambiar opciones y ajustes

9. Botón SIGUIENTE para opciones/ajustes

10. Botón INICIO

PANTALLA - Indicadores

A. INICIO DIFERIDO

B. CICLO ECO

C. MULTIZONE - Bandeja para

cubiertos

D. VÁLVULA DE AGUA CERRADA

E. AÑADIR SAL

F. MULTIZONE - Cesta superior

G. MULTIZONE - Cesta inferior

H. VERTER ABRILLANTADOR

I. PASTILLA

0000 000 00000

Service:

A B C

I H G F

1 2 3 4 5 6 7 8 9 10

Una vez conectado el dispositivo al suministro eléctrico por primera vez,

la pantalla le guiará para congurar el dispositivo para su primer uso.

1. Selección del idioma

Para seleccionar el idioma preferi-

do, pulse el botón «<» o «>».

Conrme pulsando el botón «OK».

Después de conrmar el idioma, el dispositivo continuará con el menú

de conguración inicial.

2. Ajuste de la dureza del agua

La dureza del agua se ha ajusta-

do por defecto en el nivel 3. Para

cambiar el nivel de dureza del agua,

pulse el botón «<» o «>» repetida-

mente.

Para conrmar la selección, pulse el

botón «OK». El nivel se debe ajustar

según la siguiente tabla.

Para que el depósito de sal funcione a la perfección, es esencial que

los ajustes de la dureza del agua se basen en la dureza real del agua

de su casa. Su suministrador de agua local le puede proporcionar esta

información.

Tabla de dureza del agua

Nivel

°dH

Niveles

Alemanes

°fH

Niveles

Franceses

°Clark

Niveles

Ingleses

1 Blanda 0 - 6 0 - 10 0 - 7

2 Media 7 - 11 11 - 20 8 - 14

3 Normal 12 - 16 21 - 29 15 - 20

4 Dura 17 - 34 30 - 60 21 - 42

5 Muy dura 35 - 50 61 - 90 43 - 62

3. Llenar el depósito de sal

Al ajustar la dureza del agua, es ne-

cesario llenar el depósito de sal con

agua y sal regeneradora especial.

Retire la bandeja inferior y desen-

rosque el tapón del depósito (hacia

la izquierda).

Como primer paso es necesario

llenar el depósito con agua ( ~1,5

litros).

Una vez hecho esto, continúe con

el siguiente paso pulsando el

botón «OK».

Coloque el embudo (véase la gura) y llene el depósito de sal hasta el

borde (aproximadamente 1 kg); es posible que salpique un poco de agua.

Retire el embudo y limpie cualquier residuo de sal del oricio.

Asegúrese de que el tapón esté bien cerrado, de modo que el deter-

gente no pueda entrar en el depósito durante el programa de lavado

(esto podría estropear irremisiblemente el ablandador del agua).

Una vez hecho esto, continúe con el siguiente paso pulsando el botón

«OK».

Utilice solamente sal fabricada especícamente para lavavajillas.

Siempre que necesite añadir sal, es obligatorio completar el proce-

dimiento antes del inicio del ciclo de lavado para evitar la corrosión.

Los residuos de solución salina o de granos de sal pueden deri-

var en una corrosión que dañe irreparablemente los componen-

tes de acero inoxidable.

La garantía no es aplicable si se producen daños por esta causa.

Si el depósito de sal no se llena, el ablandador del agua y la re-

sistencia pueden sufrir daños como resultado de la acumulación

de incrustaciones de cal. Se recomienda utilizar sal con cualquier

tipo de detergente para lavavajillas.

4. Ajustar el nivel de brillo

El brillo está ajustado por defecto

en el nivel 5. Para cambiar el nivel

de brillo, pulse el botón «<» o «>»

repetidamente.

Para conrmar la selección, pulse el

botón «OK».

5. Tipo de detergente usado

En este paso es muy importante

seleccionar qué tipo de detergente

se va a utilizar (pastilla/cápsula o

gel/polvo).

Si preere utilizar el detergente

todo en uno en pastilla o cápsula

para el lavado, pulse «OK» y vaya al

paso 7. Abrir la válvula de agua

en funcionamiento en la siguiente

página.

El símbolo en la pantalla estará encendido. Si preere utilizar de-

tergente en gel o en polvo para el lavado, pulse«<» o «„>», y después

vaya al paso 6. Llenar abrillantador.

6. Llenar abrillantador*

*Si en el paso anterior se seleccionó detergente todo en uno, el dispo-

sitivo se saltará este paso.

LLENAR ABRILLANTADOR

VERTIR ABRILLANTADOR

OK = LISTO

EN EL DEPÓSITO

OK = LISTO

¿ELEGIR ESPAÑOL?

<> = CAMBIO OK = SÍ

ESPAÑOL

SELECCIONADO

DUREZA DEL AGUA = 3

<> = CAMBIO OK = SÍ

DUREZA DEL AGUA

1=MIN, 5=MAX

LLENAR DE AGUA

VERTIR 1,5L

OK = LISTO

DE AGUA EN

OK = LISTO

DEPÓSITO DE SAL

OK = LISTO

LLENAR DE SAL

ECHAR 1 KG DE SAL EN

OK = LISTO

DEPÓSITO DE SAL

OK = LISTO

BRILLO DE LA PANTALLA

1=MIN, 5=MAX

BRILLO = 5

<> = CAMBIO OK = SÍ

TIPO DE DETERGENTE

¿UTILIZA PASTILLAS

<> = NO OK = SÍ

TODO EN UNO?

<> = NO OK = SÍ

PASTILLAS

<> = NO OK = SÍ

USO DEL APARATO POR PRIMERA VEZ

1. Abra el dispensador B pulsando y subiendo la lengüeta de la cubierta.

2. Introduzca el abrillantador con cuidado como máximo hasta la

última marca (110 ml) de referencia del depósito A, evitando que se

derrame. Si se derrama, limpie el derrame inmediatamente con un

paño seco.

3. Pulse la cubierta hacia abajo hasta que oiga un «clic» para cerrarla.

4. Conrme pulsando el botón «OK».

NUNCA eche el abrillantador directamente en la cuba.

Ajuste del nivel de abrillantador

(no es necesario si se utilizan pastillas o cápsulas)

La dosis del abrillantador puede ajustarse al detergente que se usa.

Cuanto más bajo es el ajuste, menos cantidad de abrillantador se dis-

pensa. La conguración de fábrica está establecida para el nivel (5).

Para cambiarlo, siga las instrucciones del apartado «AJUSTES / MENÚ».

7. Abrir la válvula de agua

ABRIR VÁLVULA AGUA

ABRIR

OK = LISTO

LA VÁLVULA DE AGUA

OK = LISTO

Compruebe que la llave de paso está abierta. Si está cerrada, ábrala y

conrme pulsando el botón «OK».

8. Primer ciclo de lavado

Antes de empezar a usar el electro-

doméstico, se recomienda utilizar

en primer lugar el ciclo Intenso

para calibrar el electrodoméstico.

Añada el detergente en el dosica-

dor de detergente D (véase a conti-

nuación) y pulse el botón «OK».

El ciclo intensivo se seleccionará

automáticamente. Pulse el botón

«INICIO» y cierre la puerta del

dispositivo antes de que pasen 4

segundos.

Este primer ciclo puede durar hasta 20 minutos más como resultado

del proceso de calibración automático.

Después de este proceso el electrodoméstico puede utilizarse normalmente.

PRIMER CICLO DE LAVADO

INICIAR

OK = LISTO

EL CICLO INTENSIVO

OK = LISTO

SIN VAJILLA

OK = LISTO

PARA COMPLETAR

OK = LISTO

LA INSTALACIÓN

OK = LISTO

AÑADIR DETERGENTE

El uso de detergente no diseñado para lavavajillas puede provocar

fallos de funcionamiento o daños en el aparato.

Para conseguir los mejores resultados de lavado y secado, es necesario

el uso combinado de detergente, líquido abrillantador y sal renada.

Recomendamos utilizar detergentes que no contengan fosfatos ni clo-

ro, ya que estos productos son perjudiciales para el medio ambiente.

Unos buenos resultados de lavado también dependen de la utilización

de la cantidad correcta de detergente.

Exceder la cantidad indicada no produce un lavado más efectivo y

aumenta la contaminación medioambiental.

La cantidad se puede ajustar según el nivel de suciedad. Si se trata de

artículos con una suciedad normal, utilice aproximadamente o bien 35

g (detergente en polvo) o 35 ml (detergente líquido) y una cucharada

pequeña adicional de detergente directamente dentro de la cuba. Si

se utilizan pastillas, bastará con una.

Si la vajilla está poco sucia o si se ha aclarado con agua antes de

ponerla en el lavavajillas, le aconsejamos que reduzca la cantidad de

detergente utilizada (mínimo 25 g/ml) p. ej. no poniendo el polvo/gel

adicional dentro de la cuba.

Para abrir el dispensador de deter-

gente, pulse el botón C. Introduzca el

detergente solo en el dispensador D

seco. Eche la cantidad de detergente

para el prelavado directamente dentro

de la cuba.

1. Cuando dosique el detergente,

consulte la información mencio-

nada anteriormente para añadir la

cantidad correcta. Dentro del dis-

pensador D hay indicaciones sobre

la dosicación del detergente.

2. Retire los restos de detergente de los bordes del dispensador y

cierre la tapa hasta oír un clic.

3. Cierre la cubierta del dispensador de detergente tirando de este ha-

cia arriba hasta que el mecanismo de cierre quede jado en su sitio.

El dispensador de detergente se abre automáticamente en el momen-

to adecuado según el programa.

Si utiliza detergentes todo en uno, recomendamos añadir sal igual-

mente, especialmente si el agua es dura o muy dura (siga las instruc-

ciones del envase).

SUGERENCIAS Y CONSEJOS

LLENADO DEL LAVAVAJILLAS

CONSEJOS

Antes de cargar los cestos, elimine todos los residuos de comida de la

vajilla y vacíe los vasos. No es necesario aclarar previamente con agua

corriente.

Coloque la vajilla de tal modo que quede bien sujeta y no se vuelque;

y coloque los recipientes con las bocas hacia abajo y las partes cónca-

vas/convexas en posición oblicua, permitiendo que el agua llegue a

todas las supercies y uya libremente.

Advertencia: tapas, mangos, bandejas y sartenes no deben impedir

que los brazos aspersores giren.

Coloque cualquier objeto pequeño en el canastillo para cuchillería.

La vajilla y los utensilios muy sucios se deberían colocar en la bandeja

inferior porque en este sector los aspersores de agua son más resisten-

tes y permiten un rendimiento de lavado superior.

Una vez cargado el aparato, asegúrese de que los brazos aspersores

puedan girar libremente.

VAJILLA INADECUADA

• Vajilla y cubiertos de madera.

• Cristalería con adornos delicados, artesanía y vajilla antigua. Los

adornos no son resistentes.

• Partes de material sintético que no resistan altas temperaturas.

• Vajilla de cobre y latón.

• Vajilla sucia de ceniza, cera, grasa lubricante o tinta.

Los colores de los adornos del cristal y las piezas de aluminio/plata

pueden cambiar y descolorarse durante el proceso de lavado. Algunos

tipos de vidrios (p. ej. los objetos de cristal) también pueden volverse

opacos después de varios ciclos de lavado.

DAÑOS A LA CRISTALERÍA Y A LA VAJILLA

• Utilice solo cristalería y porcelana garantizadas por el fabricante

como aptas para lavavajillas.

• Utilice un detergente delicado adecuado para la vajilla.

• Saque la cristalería y la cubertería del lavavajillas inmediatamente

después de la nalización del ciclo de lavado.

CONSEJOS SOBRE AHORRO ENERGÉTICO

• Si el lavavajillas doméstico se utiliza siguiendo las instrucciones del

fabricante, lavar platos en el lavavajillas suele consumir MENOS

ENERGÍA y agua que el lavado a mano.

• Para maximizar la eciencia del lavavajillas, se recomienda iniciar

el ciclo de lavado cuando el lavavajillas esté totalmente carga-

do. Cargar el lavavajillas doméstico hasta la capacidad indicada por

el fabricante contribuirá a ahorrar energía y agua. Puede encontrar

información sobre la carga correcta de la vajilla en el capítulo CAR-

GA DE LAS CESTAS.

En caso de carga parcial, se recomienda utilizar las opciones de

lavado especícas si están disponibles (Media carga/ Zone Wash/

Multizonas), llenando solo las cestas seleccionadas. La carga incor-

recta o excesiva del lavavajillas puede aumentar el consumo de

recursos (como el agua, la energía y el tiempo, así como el nivel de

ruido), reduciendo el rendimiento de lavado y de secado.

• El preaclarado manual de la vajilla conlleva un mayor consumo de

agua y energía y no está recomendado.

HIGIENE

Para evitar malos olores y sedimentos que se pueden acumular en el

lavavajillas, ejecute un programa a alta temperatura al menos una vez

al mes. Utilice una cucharadita de café de detergente y ejecútelo sin

carga para limpiar el aparato.

BANDEJA PARA CUBIERTOS

La tercera bandeja está diseñada

para alojar los cubiertos.

Coloque los cubiertos tal como

se muestra en la gura.

La colocación por separado de

los cubiertos hace que sean más

fáciles de recoger después del

lavado y mejora el rendimiento

del lavado y el secado.

Los cuchillos y otros utensilios

con bordes alados deben

colocarse con las hojas hacia

abajo.

La geometría de la bandeja

hace posible colocar artículos

pequeños como las tazas de café

en la zona central.

El canastillo para cuchillería está

equipado con dos bandejas

laterales deslizantes para

aprovechar al máximo la altura

del espacio inferior y permitir la

carga de los artículos altos en la

bandeja superior.

CESTA SUPERIOR

Carga vajilla delicada y ligera:-

vasos, copas, platos, ensaladeras

bajas.

La bandeja superior tiene unos

soportes desplegables que se

pueden utilizar en posición ver-

tical cuando se coloquen platos

de te/postres o en una posición

más baja para cargar cuencos y

recipientes.

(ejemplo de carga para la bandeja superior)

SUJECIONES PLEGABLES CON POSICIÓN AJUSTABLE

Las sujeciones plegables laterales

se pueden plegar o desplegar para

optimizar la disposición de la vajilla

en el cesto. Las copas de vino quedan

bien aseguradas en las sujeciones

plegables insertando el tallo de cada

copa en las ranuras correspondientes.

Dependiendo del modelo:

– para desplegar las sujeciones,

deslícelas hacia arriba y gírelas o

suéltelas de los cierres y tire de

ellas hacia abajo.

– para plegar las sujeciones, gírelas y deslícelas hacia abajo o tire de

ellas hacia arriba y fíjelas en los cierres.

AJUSTE DE LA ALTURA DE LA BANDEJA SUPERIOR

La altura de la bandeja superior se puede ajustar: posición alta para

colocar vajilla voluminosa en la cesta inferior y posición baja para

aprovechar al máximo los soportes desplegables creando más espacio

hacia arriba y evitando que colisionen con los artículos cargados en la

bandeja inferior.

La bandeja superior está equipada con un

Ajustador de altura de la bandeja superior

(véase la gura), sin presionar las palancas,

levántelo simplemente sujetando los laterales

de la bandeja, en cuanto la bandeja esté estable

en su posición superior.

Para restablecerla en la posición inferior,

presione las palancas A de los laterales de la

bandeja y mueva la cesta hacia abajo.

Le recomendamos encarecidamente que no

ajuste la altura de la bandeja cuando esté cargada.

NUNCA suba o baje la cesta solo por un lado.

CESTA INFERIOR

Para ollas, tapas, platos, ensaladeras, cubiertos, etc. Los platos grandes

y las tapas deberían colocarse en los lados para evitar interferencias

con el brazo aspersor.

La bandeja inferior tiene unos soportes desplegables que se pueden

utilizar en posición vertical cuando se coloquen platos o en posición

horizontal (más baja) para cargar cacerolas y ensaladeras fácilmente.

(ejemplo de carga para la bandeja inferior)

CUIDADO DEL VIDRIO

Accesorio especíco que le

permite almacenar distintos

tipos de copas bien

aseguradas en la bandeja

interior.

Ofrece buenos resultados

de limpieza y secado

permitiendo posicionar las

copas de forma optimizada

y estable.

POWER CLEAN EN LA BANDEJA INFERIOR

Power Clean utiliza los chorros de agua

especiales de la parte posterior del in-

terior del lavavajillas para limpiar mejor

los utensilios muy sucios.

Hay que colocar las ollas/cacerolas

mirando el componente Power Clean® y

activar POWER CLEAN en el panel.

La bandeja inferior tiene un Power Clean, un soporte extensible

especial que se puede utilizar para mantener sartenes o moldes en

posición vertical, para que ocupen menos espacio.

Cómo utilizar Power Clean:

1. Ajuste el área de Power Clean (G)

plegando los soportes para platos

en la parte posterior para colocar

ollas.

2. Coloque las ollas y cazuelas

inclinadas verticalmente en el área

de Power Clean. Las ollas deben

estar inclinadas hacia los chorros

a presión.

La pagina sta caricando ...

Whirlpool WIS 1150 PEL Guida utente

Marca: Whirlpool

Modello: WIS 1150 PEL

Categoria: Lavastoviglie

Tipo: Guida utente

Scarica il pdf

rapporto

in altre lingue

English: Whirlpool WIS 1150 PEL User guide
français: Whirlpool WIS 1150 PEL Mode d'emploi
español: Whirlpool WIS 1150 PEL Guía del usuario
português: Whirlpool WIS 1150 PEL Guia de usuario

Whirlpool WIS 1150 PEL Guida utente

Whirlpool WIS 1150 PEL Guida utente

in altre lingue

Documenti correlati

Altri documenti