Clover Clover Flex Guida Rapida

Clover Flex

Starter Kit

Quick Start Guide

English

Deutsch

Español

Français

Italiano

Polski

1

12

24

36

48

60

1 Clover Flex Starter Kit Quick Start Guide

We are continuously

improving our software.

To see the latest version

of this guide, visit

help.clover.com/devices/ex

English 2

Clover Flex Starter Kit

Clover Flex

Power cord

(2 for Europe)

Charging cradle

Receipt paper

Screwdriver PIN Entry Aid

(Select regions)

Power brick

3 Clover Flex Starter Kit Quick Start Guide

Clover Flex Features

Contactless

payment reader

Power button

& fingerprint sensor

Microphone

Magnetic stripe

card reader

Anti-theft security slot

Audio jack

Barcode scanner

Barcode trigger

Receipt paper door

Charging pads

USB Type-C connector

Speaker

Chip card reader

English 4

Set Up your Clover Flex

A micro SIM card may be pre-installed in the device. See

page 9 for instructions on how to replace the SIM.

Plug the power brick into the charging cradle and press the

cord into the rubber base so that it is ush on the counter.

Attach the power cord to the power brick and plug the

power cord into a power source.

Place the device on the charging cradle. If it's properly

connected, a battery icon will briey appear on the screen.

While it charges, press and hold the power button until the

Clover logo appears on the screen.

Follow the on-screen instructions to continue setting up.

1

2

4

3

5

1

2

3

5

4

5 Clover Flex Starter Kit Quick Start Guide

Recommended Usage

Clover Flex should be held with the card reader facing toward

you and the printer pointed away from you.

Barcode Scanning

Point the scanner toward the barcode on the item or the receipt

and hold down the barcode trigger. You will get the best results

by holding the device 4–10 in (10 cm–25 cm) from the item.

Barcode trigger

Hand Holding Position

English 6

Payment Methods

Magnetic Stripe Cards

Swipe the card with the

magnetic stripe facing

down. You can swipe the

card from right to left or

left to right.

Chip Cards

Insert the card with the

chip end first. Remove the

card when prompted by

the device, then follow the

on-screen instructions.

Contactless Payments

Tap chip cards with

contactless capabilities,

and phones and watches

with contactless payments

(including NFC, Apple Pay

and Android Pay) on the

contactless symbol.

7 Clover Flex Starter Kit Quick Start Guide

Secure PIN Entry and PIN Entry Aid

Front Back

The PIN Entry Aid can assist

cardholders with disabilities who

have diculty using a touchscreen

to enter their PIN. It also features

a privacy shield for added security

when entering a PIN.

For security purposes, contact us immediately if your PIN

Entry Aid does not match the images below.

English 8

Transactions with the PIN Entry Aid

Europe only. When taking a payment, tap Use Aid on

the Enter PIN screen and follow on-screen instructions to

securely place the aid over the screen and allow a customer

to enter their PIN. Remove the aid after the customer

removes their card.

Additional Accessibility Features

Clover Flex incorporates other native Android accessibility

features such as larger text and magnication gestures (not

available during secure PIN entry). These features can be

found in the Accessibility menu in your device Settings.

9 Clover Flex Starter Kit Quick Start Guide

SIM Installation

Power off the device by holding the power button until you see the

power off button on the screen, then tap it.

7-8

Open the receipt paper door and

locate the screws above the serial

number (S/N).

Use the screwdriver to turn the

screws counter-clockwise 7–8

times; the screws won’t fall out.

Use your fingernail or screwdriver

to pull down black ap.

Slide the SIM card into the tray

and align it with the angled corner.

Finally, close the ap, tighten the

screws, and power on the device.

Locate the left tray and remove the

current SIM card.

English 10

Applications

Clover comes with apps that take payments, run your front of

house, and manage your back of house. Go to App Market to

install more apps to meet your needs: clover.com/appmarket.

Sale

Enter an amount and take multiple payment types.

Refund

Refund a payment or an amount directly on a card.

Transactions

View, search, reprint, and refund transactions.

Setup

Personalize your Clover devices to suit your

business.

App Market

Add features to your devices based on your needs.

11 Clover Flex Starter Kit Quick Start Guide

Useful Resources

Web Access

Some apps can be accessed via your

web browser. We’ve put shortcuts to

these web pages at clover.com/home.

Please use Chrome, Safari, or Firefox.

In Europe, visit eu.clover.com/home.

Need Help?

Visit help.clover.com, use the Help app,

or call us anytime at the phone number

given in your welcome email.

Deutsch 12

Clover Flex-Startpaket

Kurzanleitung

Deutsch 12

13 Clover Flex-Startpaket Kurzanleitung

Wir entwickeln unsere

Software ständig weiter.

Die neueste Version dieser

Anleitung nden Sie auf

help.clover.com/devices/flex

Deutsch 14

Clover Flex-Startpaket

Netzkabel

(2 für Europa)

Ladestation

Belegrolle

Schraubendreher

PIN-Eingabehilfe

(Ausgewählte Regionen)

Netzteil

Clover Flex

15 Clover Flex-Startpaket Kurzanleitung

Funktionen von Clover Flex

Kontaktloser Leser

Ein/Aus-Taste und

Fingerabdrucksensor

Mikrofon

Magnetstreifenleser

Kensington-Buchse

Audio-Buchse

Barcode-Scanner

Barcode-Auslöser

Belegrollenklappe

Ladekontakte

USB-Typ-C-Anschluss

Lautsprecher

Chipkartenleser

Deutsch 16

Clover Flex einrichten

Eine microSIM-Karte ist möglicherweise bereits im Gerät

installiert. Anweisungen zum Ersetzen der SIM-Karte nden

Sie auf Seite 21.

Schließen Sie das Netzteil an der Ladestation an und

drücken Sie das Kabel in die Gummiführung, damit die

Ladestation ach auiegt.

Schließen Sie das Netzkabel am Netzteil an und stecken

Sie es in eine Steckdose.

Setzen Sie das Gerät auf die Ladestation. Wenn das Gerät

richtig positioniert ist, wird auf dem Display kurz ein

Batteriesymbol angezeigt.

Halten Sie während des Ladens die Ein/Aus-Taste gedrückt,

bis auf dem Display das Clover-Logo angezeigt wird.

Befolgen Sie zum Fortsetzen der Einrichtung die

Anweisungen auf dem Display.

1

2

4

3

5

1

2

3

5

4

17 Clover Flex-Startpaket Kurzanleitung

Empfehlungen für die Verwendung

Halten Sie Clover Flex mit dem Kartenleser zu sich gerichtet

und dem Drucker von sich weg gerichtet.

Barcode-Scanner

Richten Sie den Scanner auf den Barcode an einem Produkt

oder auf der Quittung und halten Sie den Barcode-Auslöser nach

unten. Die besten Ergebnisse erzielen Sie, wenn Sie das Gerät

10–25 cm vom Barcode entfernt halten.

Barcode-Auslöser

Halteposition

La pagina si sta caricando...

Clover Clover Flex Guida Rapida

Questo manuale è adatto anche per

Clover Clover Flex Guida Rapida

in altre lingue

Documenti correlati

Altri documenti