Makita UX01G Manuale utente

Categoria
Utensili elettrici
Tipo
Manuale utente
UX01G
EN Cordless Multi Function
Power Head INSTRUCTION MANUAL 6
FR Moteur Multi-Fonctions
Sans Fil MANUEL D’INSTRUCTIONS 18
DE Multifunktions-Antrieb BETRIEBSANLEITUNG 31
IT Testa motorizzata
multifunzione a batteria ISTRUZIONI PER L’USO 44
NL Multifunctioneel
accuaandrijfsysteem GEBRUIKSAANWIJZING 57
ES Herramienta Multifuncional
Inalámbrica
MANUAL DE
INSTRUCCIONES 70
PT
FERRAMENTA
MULTIFUNCIONAL A BATERIA
MANUAL DE INSTRUÇÕES 83
DA 
motorhoved BRUGSANVISNING 96
EL 
  108
TR 
Akülü Kafa KULLANMA KILAVUZU 122
2
Fig.1
Fig.2
12
1
2
3
4
5
11
10
9
8
Fig.3
2
1
7
3
6
4
5
8
10
911
12
Fig.4
3
2 3
1
1
Fig.5
1
Fig.6
1
2
Fig.7
1
Fig.8
2
1
Fig.9
2
1
Fig.10
2
1
Fig.11
4
1
1
2
3
4
5
Fig.12
1
2
Fig.13
1
Fig.14
1
2
3
Fig.15
1
Fig.16
Fig.12
3
1
2
Fig.17
1
2
Fig.18
1
2
3
2
Fig.19
5
Fig.20
1
Fig.21
1
2
Fig.22
1
Fig.23
6ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: UX01G
No load speed
(without attachment)
Low 0 - 5,700 min-1
Medium 0 - 8,200 min-1
High 0 - 9,700 min-1
Overall length (without battery cartridge) 1,001 mm
Rated voltage D.C. 36 V - 40 V max
Net weight 5.3 kg - 12.5 kg
Protection degree IPX4
 
without notice.
 
 -
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Type Battery cartridge
BL4020 BL4025 BL4040 BL4050F BL4080F
Brushcutter attachment Available Available Recom-
mended
Recom-
mended
Recom-
mended
String trimmer attachment Available Available Recom-
mended
Recom-
mended
Recom-
mended
Rotary scissors attachment Available Available Recom-
mended
Recom-
mended
Recom-
mended
Grass trimmer attachment Available Available Recom-
mended
Recom-
mended
Recom-
mended
Hedge trimmer attachment Available Recom-
mended
Recom-
mended
Recom-
mended
Recom-
mended
Ground trimmer attachment Available Recom-
mended
Recom-
mended
Recom-
mended
Recom-
mended
Pole saw attachment Available Available Recom-
mended
Recom-
mended
Recom-
mended
Cultivator attachment Available Available Recom-
mended
Recom-
mended
Recom-
mended
Edger attachment Available Recom-
mended
Recom-
mended
Recom-
mended
Recom-
mended
 Available Available Recom-
mended
Recom-
mended
Recom-
mended
Power brush attachment Available Available Recom-
mended
Recom-
mended
Recom-
mended
Power sweep attachment Available Available Recom-
mended
Recom-
mended
Recom-
mended
Blower attachment Available Available Recom-
mended
Recom-
mended
Recom-
mended
Charger DC40RA / DC40RB / DC40RC
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges

7ENGLISH
Recommended cord connected power source
Portable power pack PDC01 / PDC1200
The cord connected power source(s) listed above may not be available depending on your region of residence.
Before using the cord connected power source, read instruction and cautionary markings on them.
No load speed with attachment
Model Rotation speed
Low Medium High
EM401MP 0 - 4,200 min-1 0 - 6,000 min-1 0 - 7,100 min-1
EM404MP / EM406MP 0 - 3,500 min-1 0 - 5,000 min-1 0 - 6,000 min-1
EM407MP Upper blade 0 - 220 min-1 0 - 310 min-1 0 - 370 min-1
Lower blade 0 - 470 min-1 0 - 670 min-1 0 - 790 min-1
EM408MP / EM409MP 0 - 4,200 min-1 0 - 6,000 min-1 0 - 7,100 min-1
EN401MP / EN410MP / EN420MP
(Strokes per minute)
0 - 2,400 min-1 0 - 3,400 min-1 0 - 4,000 min-1
EY401MP (chain speed) 0 - 12 m/s 0 - 17 m/s 0 - 20 m/s
EY403MP (chain speed) 0 - 11 m/s 0 - 16 m/s 0 - 19 m/s
KR400MP 0 - 160 min-1 0 - 230 min-1 0 - 280 min-1
KR401MP 0 - 130 min-1 0 - 190 min-1 0 - 230 min-1
EE400MP 0 - 2,800 min-1 0 - 4,000 min-1 0 - 4,700 min-1
EJ400MP 0 - 1,600 min-1 0 - 2,300 min-1 0 - 2,800 min-1
BR400MP 0 - 130 min-1 0 - 190 min-1 0 - 230 min-1
SW400MP 0 - 130 min-1 0 - 190 min-1 0 - 230 min-1
UB400MP 0 - 5,650 min-1 0 - 7,800 min-1 0 - 9,450 min-1
UB401MP 0 - 5,650 min-1 0 - 7,800 min-1 0 - 9,450 min-1
Approved attachment
Type Model
Brushcutter attachment EM401MP / EM404MP
String trimmer attachment EM406MP
Rotary scissors attachment EM407MP
Grass trimmer attachment EM408MP / EM409MP
Hedge trimmer attachment EN401MP / EN410MP
Ground trimmer attachment EN420MP
Pole saw attachment EY401MP / EY403MP
Cultivator attachment KR400MP / KR401MP
Edger attachment EE400MP
 EJ400MP
Shaft extension attachment LE400MP
Power brush attachment BR400MP
Power sweep attachment SW400MP
Blower attachment UB400MP / UB401MP
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Take particular care and attention.
Do not expose to moisture.
8ENGLISH
Ni-MH
Li-ion
Only for EU countries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household waste!
In accordance with the European Directive on
waste electrical and electronic equipment and on
accumulators and batteries and waste accumu-
lators and batteries, as well as their adaptation to
national law, waste electrical equipment, batteries
and accumulators should be stored separately
and delivered to a separate collection point for
municipal waste, operating in accordance with the
regulations on environmental protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
Intended use
This cordless multi function power head is intended for
driving an approved attachment listed in the section
"SPECIFICATIONS" of this instruction manual. Never
use the unit for the other purpose.
WARNING: Read the instruction manual of
the attachment as well as this instruction manual
before using. Failure to follow the warnings and

Noise
Attachment Sound pressure level
average
Sound power level
average
Applicable
standard
LpA (dB (A))
Uncertainty
K (dB (A))
LWA (dB (A))
Uncertainty
K (dB (A))
EM401MP (as a brushcutter) 79.8 1.2 94.8 2.5
ISO22868
(ISO11806-1)
EM401MP (as a string trimmer) Nylon cutting head 80.1 1.0 94.3 2.0
ISO22868
(ISO11806-1)/
EN50636-2-91
Plastic blade 79.4 1.0 91.4 2.1
ISO22868
(ISO11806-1)/
EN50636-2-91
EM404MP (as a brushcutter) 79.4 1.4 92.0 1.0
ISO22868
(ISO11806-1)
EM404MP (as a string trimmer) Nylon cutting head 80.7 1.3 91.9 1.4
ISO22868
(ISO11806-1)/
EN50636-2-91
Plastic blade 78.6 0.7 87.8 0.4
ISO22868
(ISO11806-1)/
EN50636-2-91
EM406MP Nylon cutting head 81.3 0.6 93.4 2.1
ISO22868
(ISO11806-1)/
EN50636-2-91
Plastic blade 78.8 0.4 87.9 0.6
ISO22868
(ISO11806-1)/
EN50636-2-91
EM407MP 84.7 1.7 99.0 1.3
ISO22868
(ISO11806-1)
EM408MP Metal blade 80.7 1.7 94.7 3.0
ISO22868
(ISO11806-1)
Nylon cutting head 79.5 1.3 92.8 2.7
ISO22868
(ISO11806-1)/
EN50636-2-91
Plastic blade 80.5 1.1 92.2 2.8
ISO22868
(ISO11806-1)/
EN50636-2-91
EM409MP Nylon cutting head 80.6 1.2 93.4 2.3
ISO22868
(ISO11806-1)/
EN50636-2-91
Plastic blade 81.0 1.4 91.9 2.4
ISO22868
(ISO11806-1)/
EN50636-2-91
EN401MP 84 395 3
EN62841-4-2
EN401MP + LE400MP 85 396 3
EN62841-4-2
9ENGLISH
Attachment Sound pressure level
average
Sound power level
average
Applicable
standard
LpA (dB (A))
Uncertainty
K (dB (A))
LWA (dB (A))
Uncertainty
K (dB (A))
EN410MP 80 391 3
EN62841-4-2
EN410MP + LE400MP 80 391 3
EN62841-4-2
EN420MP 83 394 3
EN62841-4-2
EY401MP 94 3103 3
ISO22868
(ISO11680-1)
EY401MP + LE400MP 85 3103 3
ISO22868
(ISO11680-1)
EY403MP 95 3102 3
ISO22868
(ISO11680-1)
EY403MP+LE400MP 95 3102 3
ISO22868
(ISO11680-1)
KR400MP 77.8 0.7 86.6 1.2 EN709
KR401MP 77.7 0.3 86.7 2.0 EN709
EE400MP 76.1 1.7 88.2 2.3 ISO11789 /
2000/14/EC
EJ400MP 82.9 0.6 94.4 1.5
ISO22868
(ISO11806-1)
EJ400MP + LE400MP 79.7 1.4 94.0 0.7
ISO22868
(ISO11806-1)
BR400MP 80.2 1.0 88.9 0.8
EN60335-2-72
SW400MP 80.3 0.2 88.3 0.6
EN60335-2-72
UB400MP 92.1 1.6 104.1 1.3
EN50636-2-100
UB401MP 85.6 2.1 97.1 1.0
EN50636-2-100
Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB
(A). Wear ear protection.
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING: Wear ear protection.
WARNING: -
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the

Vibration
Attachment Left handle (Front grip)
Right handle (Rear grip)
Applicable
standard
ah (m/s2)
Uncertainty
K (m/s2)
ah (m/s2)
Uncertainty
K (m/s2)
EM401MP (as a brushcutter) 2.5 or less 1.5 2.5 or less 1.5
ISO22867
(ISO11806-1)
EM401MP (as a string trimmer) Nylon cutting head 3.7 1.5 3.0 1.5
ISO22867
(ISO11806-1)
Plastic blade 2.5 or less 1.5 2.5 or less 1.5
ISO22867
(ISO11806-1)
EM404MP (as a brushcutter) 2.5 or less 1.5 2.5 or less 1.5
ISO22867
(ISO11806-1)
EM404MP (as a string trimmer) Nylon cutting head 2.5 or less 1.5 2.5 or less 1.5
ISO22867
(ISO11806-1)
Plastic blade 2.5 or less 1.5 2.5 or less 1.5
ISO22867
(ISO11806-1)
10 ENGLISH
Attachment Left handle (Front grip)
Right handle (Rear grip)
Applicable
standard
ah (m/s2)
Uncertainty
K (m/s2)
ah (m/s2)
Uncertainty
K (m/s2)
EM406MP Nylon cutting head 2.5 or less 1.5 2.5 or less 1.5
ISO22867
(ISO11806-1)
Plastic blade 2.5 or less 1.5 2.5 or less 1.5
ISO22867
(ISO11806-1)
EM407MP 2.5 or less 1.5 2.5 or less 1.5
ISO22867
(ISO11806-1)
EM408MP Metal blade 2.5 or less 1.5 2.5 or less 1.5
ISO22867
(ISO11806-1)
Nylon cutting head 2.5 or less 1.5 2.5 or less 1.5
ISO22867
(ISO11806-1)
Plastic blade 2.5 or less 1.5 2.5 or less 1.5
ISO22867
(ISO11806-1)
EM409MP Nylon cutting head 2.5 or less 1.5 2.5 or less 1.5
ISO22867
(ISO11806-1)
Plastic blade 2.5 or less 1.5 2.5 or less 1.5
ISO22867
(ISO11806-1)
EN401MP 3.4 1.5 2.5 or less 1.5
EN62841-4-2
EN401MP + LE400MP 5.4 1.5 2.7 1.5
EN62841-4-2
EN410MP 2.8 1.5 2.5 or less 1.5
EN62841-4-2
EN410MP + LE400MP 4.4 1.5 2.5 or less 1.5
EN62841-4-2
EN420MP 2.9 1.5 2.5 or less 1.5
EN62841-4-2
EY401MP 2.5 or less 1.5 2.5 or less 1.5
ISO22867
(ISO11680-1)
EY401MP + LE400MP 2.5 or less 1.5 2.5 or less 1.5
ISO22867
(ISO11680-1)
EY403MP 4.0 1.5 2.5 or less 1.5
ISO22867
(ISO11680-1)
EY403MP+LE400MP 3.2 1.5 2.5 or less 1.5
ISO22867
(ISO11680-1)
KR400MP 2.5 or less 1.5 2.5 or less 1.5 EN709
KR401MP 2.5 or less 1.5 2.5 or less 1.5 EN709
EE400MP 2.5 or less 1.5 2.5 or less 1.5 ISO11789
EJ400MP 3.5 1.5 3.9 1.5
ISO22867
(ISO11806-1)
EJ400MP + LE400MP 4.8 1.5 2.6 1.5
ISO22867
(ISO11806-1)
BR400MP 2.5 or less 1.5 2.5 or less 1.5
EN60335-2-72
SW400MP 2.5 1.5 2.5 or less 1.5
EN60335-2-72
UB400MP 4.6 1.5 2.5 or less 2.5
EN50636-2-100
UB401MP 2.5 or less 1.7 2.5 or less 1.5
EN50636-2-100
NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.
WARNING: 
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the

EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
11 ENGLISH
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-

with this power tool. Failure to follow all instructions


Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Additional safety instructions
Personal protective equipment
Fig.1
1. Wear safety helmet, protective goggles and
protective gloves to protect yourself from

2. -
vent hearing loss.
3. Wear proper clothing and shoes for safe
operation, such as a work overall and sturdy,
non-slip shoes. Do not wear loose clothing or
jewelry.
caught in moving parts.
4.
When touching the cutting blade, wear protective
gloves. Cutting blades can cut bare hands severely.
Work area safety
1. Before operation, examine the work area for
stones or other solid objects. They can be
thrown or cause dangerous kickback and result in

Electrical and battery safety
1. Avoid dangerous environment. Don't use the
tool in dump or wet locations or expose it to
rain. Water entering the tool will increase the risk
of electric shock.
2. 
The cell may explode. Check with local codes for
possible special disposal instructions.
3.
Do not open or mutilate the battery(ies). Released
electrolyte is corrosive and may cause damage to
the eyes or skin. It may be toxic if swallowed.
4.
Do not charge battery in rain, or in wet locations.
5. Do not replace the battery with wet hands.
6. Do not replace the battery in the rain.
7. Do not wet the terminal of battery with liquid
such as water, or submerge the battery. Do not
leave the battery in the rain, nor charge, use,
or store the battery in a damp or wet place. If
the terminal gets wet or liquid enters inside of bat-
tery, the battery may be short circuited and there is

8. After removing the battery from the tool or
charger, be sure to attach the battery cover to
the battery and store it in a dry place.
9. If the battery cartridge gets wet, drain the
water inside and then wipe it with a dry cloth.
Dry the battery cartridge completely in a dry
place before use.
Putting into operation
1. The cutting tool has to be equipped with the
guard. Never run the tool with damaged guards
or without guards in place!
2. Make sure there are no electrical cables, water
pipes, gas pipes etc. that could cause a hazard
if damaged by use of the tool.
Operation
1. Always keep your hands, face, and clothes
away from the cutting tool when it is rotating.

2. During operation, keep bystanders or animals
at least 15 m away from the tool. Stop the tool
as soon as someone approaches.
3. During operation, never stand on an unstable
or slippery surface or a steep slope. During
the cold season, beware of ice and snow and
always ensure secure footing.
4. Never work on a ladder or tree to avoid loss of
control.
5. When you leave the tool, even if it is a short
time, always remove the battery cartridge. The
unattended tool with the battery cartridge installed
may be used by unauthorized person and cause
serious accident.
6. Before starting the tool, be sure that the cut-
ting tool is not touching the ground and other
obstacles such as a tree.
7. Check the cutting attachment frequently
during operation for cracks or damages.
Before the inspection, remove the battery
cartridge and wait until the cutting attachment
stops completely. Replace damaged cutting
attachment immediately, even if it has only

8. Do not operate the tool in bad weather or if
there is a risk of lightning.
9. During operation always hold the tool with
both hands. Never hold the tool with one hand
during use.
10. During operation, use the shoulder harness.

11. Do not touch the gear case during and imme-
diately after the operation. The gear case
becomes hot during operation and can cause burn

12. Take a rest to prevent loss of control caused
by fatigue. We recommend taking a 10 to 20-min-
ute rest every hour.
13. When you use the tool on muddy ground, wet
slope, or slippery place, pay attention to your
footing.
14. Avoid working in poor environment where
increased user fatigue is expected.
12 ENGLISH
15. Do not use the tool in bad weather where visi-
bility is limited. Failure to do so may cause fall or
incorrect operation due to low visibility.
16. Do not submerge the tool into a puddle.
17. Do not leave the tool unattended outdoors in
the rain.
18. When wet leaves or dirt adhere to the suc-
tion mouth (ventilation window) due to rain,
remove them.
19. Do not use the tool in the snow.
Cutting tools
1. When using cutting blades, avoid kickback
and always prepare for an accidental kickback.
See the section for Kickback.
2. When not in use, attach the blade cover onto
the blade. Remove the cover before operation.
Kickback (Blade thrust)
1. Kickback (blade thrust) is a sudden reaction
to a caught or bound cutting blade. Once it
occurs, the tool is thrown sideway or toward
the operator at great force and it may cause
serious injury.
2. Kickback occurs particularly when applying
the blade segment between 12 and 2 o'clock
to solids, bushes and trees with 3 cm or larger
diameter.
Fig.2
3. To avoid kickback:
1. Apply the segment between 8 and 11
o'clock.
2. Never apply the segment between 12 and
2 o'clock.
3. Never apply the segment between 11 and
12 o'clock and between 2 and 5 o'clock,
unless the operator is well trained and
experienced and does it at his/her own
risk.
4. Never use cutting blades close to solids,
such as fences, walls, tree trunks and
stones.
5. Never use cutting blades vertically, for
such operations as edging and trimming
hedges.
Fig.3
Vibration
1. People with poor circulation who are exposed
to excessive vibration may experience injury
to blood vessels or the nervous system.
Vibration may cause the following symptoms

asleep" (numbness), tingling, pain, stabbing sen-
sation, alteration of skin color or of the skin. If any
of these symptoms occur, see a physician!
2. 
keep your hands warm during operation and
well maintain the tool and accessories.
Transport
1. 
remove the battery cartridge. Attach the cover
to the cutting blade.
Maintenance
1. Before doing any maintenance or repair work

remove the battery cartridge.
2. When handling a cutter blade, always wear
gloves and put the blade cover on the blade.
3. Keep handles dry, clean and free from oil and
grease. Keep all cooling air inlets clear of
debris.
4. Do not wash the tool with high pressure water.
5. When washing the tool, do not let water enter
the electrical mechanism such as battery,
motor, and terminals.
6. Perform inspection or maintenance in a place
where rain can be avoided.
7. After using the tool, remove the adhered dirt
and dry the tool completely before storing.
Depending on the season or the area, there is a
risk of malfunction due to freezing.
Storage
1. Before storing the tool, perform full cleaning
and maintenance. Remove the battery car-
tridge. Attach the cover to the cutting blade.
2. Store the tool in a dry and high or locked loca-
tion out of reach of children.
3. When storing the tool, avoid direct sunlight
and rain, and store it in a place where it does
not get hot or humid.
Important safety instructions for
battery cartridge
1.
Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery char-
ger, (2) battery, and (3) product using battery.
2. Do not disassemble or tamper with the battery
cartridge.
or explosion.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them
out with clear water and seek medical atten-
tion right away. It may result in loss of your
eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any con-
ductive material.
(2) Avoid storing battery cartridge in a con-
tainer with other metal objects such as
nails, coins, etc.
(3) Do not expose battery cartridge to water
or rain.
A battery short can cause a large current

breakdown.
13 ENGLISH
6. Do not store and use the tool and battery car-
tridge in locations where the temperature may
reach or exceed 50 °C (122 °F).
7. Do not incinerate the battery cartridge even if
it is severely damaged or is completely worn

8. Do not nail, cut, crush, throw, drop the battery
cartridge, or hit against a hard object to the
battery cartridge. Such conduct may result in a

9. Do not use a damaged battery.
10. The contained lithium-ion batteries are subject
to the Dangerous Goods Legislation require-
ments.
For commercial transports e.g. by third parties,
forwarding agents, special requirement on pack-
aging and labeling must be observed.
For preparation of the item being shipped, consult-
ing an expert for hazardous material is required.
Please also observe possibly more detailed
national regulations.

battery in such a manner that it cannot move
around in the packaging.
11. When disposing the battery cartridge, remove
it from the tool and dispose of it in a safe
place. Follow your local regulations relating to
disposal of battery.
12. Use the batteries only with the products
 Installing the batteries to
-
sive heat, explosion, or leak of electrolyte.
13. If the tool is not used for a long period of time,
the battery must be removed from the tool.
14. During and after use, the battery cartridge may
take on heat which can cause burns or low
temperature burns. Pay attention to the han-
dling of hot battery cartridges.
15. Do not touch the terminal of the tool imme-
diately after use as it may get hot enough to
cause burns.
16. Do not allow chips, dust, or soil stuck into the
terminals, holes, and grooves of the battery
cartridge.
burst and malfunction of the tool or battery car-

17. Unless the tool supports the use near
high-voltage electrical power lines, do not use
the battery cartridge near a high-voltage elec-
trical power lines. It may result in a malfunction
or breakdown of the tool or battery cartridge.
18. Keep the battery away from children.
SAVE THESE INSTRUCTIONS.
CAUTION: Only use genuine Makita batteries.
Use of non-genuine Makita batteries, or batteries that
have been altered, may result in the battery bursting

also void the Makita warranty for the Makita tool and
charger.
Tips for maintaining maximum
battery life
1. Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
2. Never recharge a fully charged battery car-
tridge. Overcharging shortens the battery
service life.
3. Charge the battery cartridge with room tem-
perature at 10 °C - 40 °C (50 °F - 104 °F). Let
a hot battery cartridge cool down before
charging it.
4. When not using the battery cartridge, remove
it from the tool or the charger.
5. Charge the battery cartridge if you do not use
it for a long period (more than six months).
PARTS DESCRIPTION
Fig.4
1Battery cartridge 2 3Hanger 4Handle
5Release button 6Barrier 7Switch trigger 8Speed indicator
9Main power button 10 Caution lamp 11 Reverse button 12 Shoulder harness
14 ENGLISH
FUNCTIONAL
DESCRIPTION
WARNING: Always be sure that the tool is

before adjusting or checking function on the tool.


start-up.
Installing or removing battery
cartridge
CAUTION: 
installing or removing of the battery cartridge.
CAUTION: Hold the tool and the battery car-

cartridge. Failure to hold the tool and the battery

and result in damage to the tool and battery cartridge

Fig.5: 1. Red indicator 2. Button 3. Battery cartridge
To remove the battery cartridge, slide it from the tool
while sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator as

CAUTION: Always install the battery cartridge
fully until the red indicator cannot be seen. If not,

you or someone around you.
CAUTION: Do not install the battery cartridge
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
Tool / battery protection system
The tool is equipped with a tool/battery protection

the motor to extend tool and battery life. The tool will
automatically stop during operation if the tool is placed

Fig.6: 1. Caution lamp
Caution lamp Status
Color On Blinking
Green Overload
Red (tool) / (battery) Overheat
Red Over
discharge
Overload protection
If the tool or battery gets into one of the following situa-
tion, the tool automatically stops and the caution lamp

The tool is overloaded by entangled weeds or
other debris.
The cutting tool is locked or kicked back.
The main power button is turned on while the
switch trigger is being pulled.
In this situation, release the switch trigger and remove
entangled weeds or debris if necessary. After that, pull
the switch trigger again to resume.
CAUTION: If you need to remove the entan-
gled weeds on the tool or release the locked

start.
Overheat protection for tool or
battery
If the tool or battery cartridge is overheated, the tool
stops automatically. When the tool is overheated, the
caution lamp lights up in red. When the battery cartridge
is overheated, the caution lamp blinks in red. Let the
tool and/or battery cool down before turning the tool on
again.
Overdischarge protection
When the battery capacity becomes low, the tool stops
automatically and the caution lamp starts blinking in red.
If the tool does not operate even when the switches are
operated, remove the battery cartridge from the tool and
charge it.
Indicating the remaining battery
capacity
Press the check button on the battery cartridge to indi-
cate the remaining battery capacity. The indicator lamps
light up for a few seconds.
Fig.7: 1. Indicator lamps 2. Check button
Indicator lamps Remaining
capacity
Lighted  Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
The battery
may have
malfunctioned.
15 ENGLISH
NOTE: Depending on the conditions of use and the

from the actual capacity.
NOTE:
the battery protection system works.
Main power switch
WARNING: 
switch when not in use.
Press the main power button to turn on the tool. To turn


Fig.8: 1. Main power button
NOTE: The caution lamp brinks if the switch trigger
is pulled under unoperatable conditions. The caution
lamp blinks if you turn on the main power switch while

NOTE:
To avoid unintentional start up, the main power switch
will automatically shut down when the switch trigger
is not pulled for a certain period after the main power
switch is turned on.
Switch action
WARNING: For your safety, this tool is

tool from unintended starting. NEVER use the tool
if it runs when you simply pull the switch trigger

tool to our authorized service center for proper
repairs BEFORE further usage.
WARNING: NEVER tape down or defeat pur-

CAUTION: Before installing the battery car-
tridge into the tool, always check to see that the
switch trigger actuates properly and returns to
the "OFF" position when released.
CAUTION: 
power button and switch trigger when carrying
the tool. The tool may start unintentionally and cause

NOTICE: Do not pull the switch trigger hard with-

switch breakage.
To prevent the switch trigger from being accidentally

Fig.9: 1.2. Switch trigger
To start the tool, turn on the main power switch and

grasp) and then pull the switch trigger. Tool speed is
increased by increasing the pressure on the switch
trigger. To stop the tool, release the switch trigger.
Speed adjusting
You can select the tool speed by tapping the main
power button. Each time you tap the main power button,
the level of speed will change.
Fig.10: 1. Speed indicator 2. Main power button
Speed indicator Mode
High
Medium
Low
Reverse button for debris removal
WARNING: 
the battery cartridge before you remove entan-
gled weeds or debris which the reverse rotation
function can not remove.
remove the battery cartridge may result in serious

This tool has a reverse button to change the direction of
rotation. It is only for removing weeds and debris entan-
gled in the tool.
To reverse the rotation, tap the reverse button and pull

when the cutting tool is stopped. The speed indicators
start blinking, and the cutting tool rotates in reverse
direction when you pull the switch trigger.
To return to regular rotation, release the trigger and wait
until the cutting tool stops.
Fig.11: 1. Speed indicator 2. Reverse button
NOTE: During the reverse rotation, the tool operates
only for a short period of time and then automatically
stops.
NOTE: Once the tool is stopped, the rotation returns
to regular direction when you start the tool again.
NOTE: If you tap the reverse button while the cutting
tool is still rotating, the tool comes to stop and to be
ready for reverse rotation.
Electronic torque control function
The tool electronically detects a sudden drop in the
rotation speed which may cause a kickback. In this
situation, the tool automatically stops to prevent further
rotation of cutting tool. To restart the tool, release the
switch trigger. Clear the cause of sudden drop in the
rotation speed and then turn the tool on.
NOTE: This function is not a preventive measure for
kickbacks.
16 ENGLISH
ASSEMBLY
WARNING: Always be sure that the tool is

before carrying out any work on the tool. Failure to


WARNING: Never start the tool unless it is
completely assembled. Operation of the tool in a
partially assembled state may result in serious per-

Mounting the handle
Attach the handle with supplied clamps and bolts. Make
sure that the handle is located between the spacer and
the arrow mark. Do not remove or shrink the spacer.
Fig.12: 1. Clamp 2. Hex socket bolt 3. Handle
4. Arrow mark 5. Spacer
When using the following attachments, be sure to attach
the barrier to the handle using the screw on the barrier.
Brushcutter attachment *
Rotary scissors attachment
Grass trimmer attachment *
Edger attachment
*. Only when metal blade is attached.
Fig.13: 1. Barrier 2. Screw
Mounting the attachment pipe
CAUTION: Always check that the attachment
pipe is secured after installation. Improper instal-


Mount the attachment pipe to the power unit.
1. Turn the lever of the power unit toward the attach-
ment side.
Fig.14: 1. Lever
2. Remove the cap of the attachment. Align the pin
with the arrow mark and insert the attachment pipe until
the release button pops up.
Fig.15: 1. Release button 2. Arrow mark 3. Pin
3. Turn the lever toward the power unit side.
Fig.16: 1. Lever
Make sure that the surface of the lever is parallel to the
pipe.
To remove the pipe, turn the lever toward the attach-
ment side and pull the pipe out while pressing down the
release button.
Fig.17: 1. Release button 2. Lever 3. Pipe
Adjusting the handle position
-
dling of the tool.
Loosen the hex socket head bolt on the handle. Move
the handle to a comfortable working position and then
tighten the bolt.
Fig.18: 1. Handle 2. Hex socket head bolt
Attaching the shoulder harness
WARNING: Be extremely careful to maintain
control of the tool at all times. Do not allow the

work vicinity. Failure to keep control of the tool

operator.
CAUTION: When you use the tool in combi-
nation of the backpack-type power supply such
as portable power pack, do not use the shoulder
harness included in the tool package, but use the
hanging band recommended by Makita.
If you put on the shoulder harness included in the
tool package and the shoulder harness of the back-
pack-type power supply at the same time, removing

case of an emergency, and it may cause an accident

Makita Authorized Service Centers.
CAUTION: Always use the shoulder harness
attached to the tool. Before operation, adjust the
shoulder harness according to the user size to
prevent fatigue.
CAUTION: Before operation, make sure that
the shoulder harness is properly attached to the
tool.
1. Clasp the hook on the shoulder harness to tool's
ring and hanger.
Fig.19: 1. Ring 2. Hook 3. Hanger
2. Put on the shoulder harness on your left shoulder.

position.
Fig.20
The shoulder harness features a means of quick
release.
Simply squeeze the sides of the buckle to release the
tool from the shoulder harness.
Fig.21: 1. Buckle
Hex wrench storage
CAUTION: Be careful not to leave the hex
wrench inserted in the tool head. It may cause

When not in use, store the hex wrench as illustrated to
keep it from being lost.
Fig.22: 1. Handle 2. Hex wrench
17 ENGLISH
MAINTENANCE
WARNING:
Always be sure that the tool is

attempting to perform inspection or maintenance on the
tool.

NOTICE: Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,

be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Cleaning the tool

a dry cloth or one dipped in soapy water and wrung out.
To avoid overheating of the tool, be sure to remove the

Battery guard
WARNING:
Do not remove the battery guard.
Do not use the tool with the battery guard removed
or damaged. Direct impact to the battery cartridge


contact your authorized service center for repairs.
Fig.23: 1. Battery guard
TROUBLESHOOTING

do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replace-
ment parts for repairs.
State of abnormality Probable cause (malfunction) Remedy
Motor does not run. Battery cartridge is not installed. Install the battery cartridge.
Battery problem (under voltage) 
replace battery.
The drive system does not work
correctly.
Ask your local authorized service center for repair.
Motor stops running after a little use. Rotation is in reverse. Change the direction of rotation with the reversing
switch.
Battery's charge level is low. 
replace battery.
Overheating. Stop using of tool to allow it to cool down.
It does not reach maximum RPM. Battery is installed improperly. Install the battery cartridge as described in this
manual.
Battery power is dropping. 
replace battery.
The drive system does not work
correctly.
Ask your local authorized service center for repair.
OPTIONAL ACCESSORIES
CAUTION: These accessories or attachments
are recommended for use with your Makita tool
 The use of any other
accessories or attachments might present a risk of

for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
Refer to "Approved attachment" section for the applica-
ble models for this tool.
Brushcutter attachment
String trimmer attachment
Rotary scissors attachment
Grass trimmer attachment
Hedge trimmer attachment
Ground trimmer attachment
Pole saw attachment
Cultivator attachment
Edger attachment
 
Shaft extension attachment
Power brush attachment
Power sweep attachment
Blower attachment
Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may

18 FRANÇAIS
FRANÇAIS (Instructions originales)
SPÉCIFICATIONS
Modèle : UX01G
Vitesse à vide
(sans accessoire)
Faible 0 - 5 700 min-1
Moyen 0 - 8 200 min-1
Élevé 0 - 9 700 min-1
Longueur totale (sans la batterie) 1 001 mm
Tension nominale 36 V - 40 V c.c. max.
Poids net 5,3 kg - 12,5 kg
Degré de protection IPX4
 

 
 
plus lourde, conformément à la procédure EPTA 01/2014, sont indiquées dans le tableau.
Batterie et chargeur applicables
Type Batterie
BL4020 BL4025 BL4040 BL4050F BL4080F
Tête Débroussailleuse Disponible Disponible
Recommandé Recommandé Recommandé
Tête Coupe Herbe Disponible Disponible
Recommandé Recommandé Recommandé
Outil Ciseaux rotatifs Disponible Disponible
Recommandé Recommandé Recommandé
Tête débroussailleuse Disponible Disponible
Recommandé Recommandé Recommandé
Tête Taille-Haie à Perche Disponible
Recommandé Recommandé Recommandé Recommandé
Tête Faucheuse Disponible
Recommandé Recommandé Recommandé Recommandé
Tête Élagueuse à Perche Disponible Disponible
Recommandé Recommandé Recommandé
Tête Moto-Bineuse Disponible Disponible
Recommandé Recommandé Recommandé
Tête dresse-bordures Disponible
Recommandé Recommandé Recommandé Recommandé
Tête Peigne Vibreur Pour Café Disponible Disponible
Recommandé Recommandé Recommandé
Outil Balai Brosse Disponible Disponible
Recommandé Recommandé Recommandé
Outil Balai Racleur Disponible Disponible
Recommandé Recommandé Recommandé
 Disponible Disponible
Recommandé Recommandé Recommandé
Chargeur DC40RA / DC40RB / DC40RC
Certains chargeurs et batteries répertoriés ci-dessus peuvent ne pas être disponibles selon la région où vous
résidez.
AVERTISSEMENT : N’utilisez que les batteries et les chargeurs répertoriés ci-dessus. L’utilisation
d’autres batteries et chargeurs peut provoquer des blessures et/ou un incendie.
Source d’alimentation connectée par cordon recommandée
Support d’alimentation portable PDC01 / PDC1200
La ou les sources d’alimentation connectées par cordon répertoriées ci-dessus peuvent ne pas être dispo-
nibles selon la région où vous résidez.
Avant d’utiliser la source d’alimentation connectée par cordon, lisez les instructions et les avertissements
inscrits dessus.
19 FRANÇAIS
Vitesse à vide avec accessoire
Modèle Vitesse de rotation
Faible Moyen Élevé
EM401MP 0 - 4 200 min-1 0 - 6 000 min-1 0 - 7 100 min-1
EM404MP / EM406MP 0 - 3 500 min-1 0 - 5 000 min-1 0 - 6 000 min-1
EM407MP Lame supérieure 0 - 220 min-1 0 - 310 min-1 0 - 370 min-1
Lame inférieure 0 - 470 min-1 0 - 670 min-1 0 - 790 min-1
EM408MP / EM409MP 0 - 4 200 min-1 0 - 6 000 min-1 0 - 7 100 min-1
EN401MP / EN410MP / EN420MP
(Nombre de courses par minute)
0 - 2 400 min-1 0 - 3 400 min-1 0 - 4 000 min-1
EY401MP (vitesse de chaîne) 0 - 12 m/s 0 - 17 m/s 0 - 20 m/s
EY403MP (vitesse de chaîne) 0 - 11 m/s 0 - 16 m/s 0 - 19 m/s
KR400MP 0 - 160 min-1 0 - 230 min-1 0 - 280 min-1
KR401MP 0 - 130 min-1 0 - 190 min-1 0 - 230 min-1
EE400MP 0 - 2 800 min-1 0 - 4 000 min-1 0 - 4 700 min-1
EJ400MP 0 - 1 600 min-1 0 - 2 300 min-1 0 - 2 800 min-1
BR400MP 0 - 130 min-1 0 - 190 min-1 0 - 230 min-1
SW400MP 0 - 130 min-1 0 - 190 min-1 0 - 230 min-1
UB400MP 0 - 5 650 min-1 0 - 7 800 min-1 0 - 9 450 min-1
UB401MP 0 - 5 650 min-1 0 - 7 800 min-1 0 - 9 450 min-1
Accessoire approuvé
Type Modèle
Tête Débroussailleuse EM401MP / EM404MP
Tête Coupe Herbe EM406MP
Outil Ciseaux rotatifs EM407MP
Tête débroussailleuse EM408MP / EM409MP
Tête Taille-Haie à Perche EN401MP / EN410MP
Tête Faucheuse EN420MP
Tête Élagueuse à Perche EY401MP / EY403MP
Tête Moto-Bineuse KR400MP / KR401MP
Tête Dresse-Bordures EE400MP
Tête Peigne Vibreur Pour Café EJ400MP
Rallonge d’Arbre LE400MP
Outil Balai Brosse BR400MP
Outil Balai Racleur SW400MP
 UB400MP / UB401MP
Symboles
Vous trouverez ci-dessous les symboles susceptibles
d’être utilisés pour l’appareil. Veillez à comprendre leur

Lire le mode d’emploi.
Veuillez être prudent et rester attentif.
Ne pas exposer à l’eau.
Ni-MH
Li-ion
Pour les pays de l’Union européenne uniquement
En raison de la présence de composants dange-
reux dans l’équipement, les déchets d’équipe-
ments électriques et électroniques, les accumu-
lateurs et les batteries peuvent avoir un impact
négatif sur l’environnement et la santé humaine.
-

Conformément à la directive européenne relative aux
déchets d’équipements électriques et électroniques
et aux déchets d’accumulateurs et de batteries, ainsi
qu’à son adaptation à la législation nationale, les
déchets d’équipements électriques, les batteries et
les accumulateurs doivent être collectés séparément
et déposés dans un point de collecte distinct pour
déchets urbains, conformément aux réglementations

Cela est indiqué par le symbole de la pou-
belle à roulettes barrée sur l’équipement.
20 FRANÇAIS
Utilisations

entraîner un accessoire approuvé dans la section «
SPÉCIFICATIONS » de ce manuel d’instructions. Ne

AVERTISSEMENT : Lire le manuel d’instruc-
tions de l’accessoire, ainsi que ce manuel d’ins-
tructions avant toute utilisation. Le non-respect
des avertissements et des instructions peut entraîner
de graves blessures.
Bruit
Accessoire Niveau de pression
sonore moyenne
Niveau de puissance
sonore moyenne
Norme
applicable
LpA (dB (A))
Incertitude
K (dB (A))
LWA (dB (A))
Incertitude
K (dB (A))
EM401MP (comme débroussailleuse) 79,8 1,2 94,8 2,5
ISO22868
(ISO11806-1)
EM401MP (comme coupe herbe)
 80,1 1,0 94,3 2,0
ISO22868
(ISO11806-1)/
EN50636-2-91
Lame en plastique 79,4 1,0 91,4 2,1
ISO22868
(ISO11806-1)/
EN50636-2-91
EM404MP (comme débroussailleuse) 79,4 1,4 92,0 1,0
ISO22868
(ISO11806-1)
EM404MP (comme coupe herbe)
 80,7 1,3 91,9 1,4
ISO22868
(ISO11806-1)/
EN50636-2-91
Lame en plastique 78,6 0,7 87,8 0,4
ISO22868
(ISO11806-1)/
EN50636-2-91
EM406MP  81,3 0,6 93,4 2,1
ISO22868
(ISO11806-1)/
EN50636-2-91
Lame en plastique 78,8 0,4 87,9 0,6
ISO22868
(ISO11806-1)/
EN50636-2-91
EM407MP 84,7 1,7 99,0 1,3
ISO22868
(ISO11806-1)
EM408MP Lame métallique 80,7 1,7 94,7 3,0
ISO22868
(ISO11806-1)
 79,5 1,3 92,8 2,7
ISO22868
(ISO11806-1)/
EN50636-2-91
Lame en plastique 80,5 1,1 92,2 2,8
ISO22868
(ISO11806-1)/
EN50636-2-91
EM409MP  80,6 1,2 93,4 2,3
ISO22868
(ISO11806-1)/
EN50636-2-91
Lame en plastique 81,0 1,4 91,9 2,4
ISO22868
(ISO11806-1)/
EN50636-2-91
EN401MP 84 395 3
EN62841-4-2
EN401MP + LE400MP 85 396 3
EN62841-4-2
EN410MP 80 391 3
EN62841-4-2
EN410MP + LE400MP 80 391 3
EN62841-4-2
EN420MP 83 394 3
EN62841-4-2
EY401MP 94 3103 3
ISO22868
(ISO11680-1)
EY401MP + LE400MP 85 3103 3
ISO22868
(ISO11680-1)
EY403MP 95 3102 3
ISO22868
(ISO11680-1)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136

Makita UX01G Manuale utente

Categoria
Utensili elettrici
Tipo
Manuale utente