Lexmark Monochrome Laser Manuale utente

Marca: Lexmark

Modello: Monochrome Laser

Tipo: Manuale utente

Forms and Bar Code Card

User's Guide

October 2008 www.lexmark.com

Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.

All other trademarks are the property of their respective owners.

740 West New Circle Road

Lexington, Kentucky 40550

Contents

Introduction........................................................................................5

Overview...................................................................................................................................................................................5

Installing the Forms and Bar Code Card .......................................................................................................................5

Supported fonts and bar codes......................................................7

Bar codes...................................................................................................................................................................................7

Fonts.........................................................................................................................................................................................10

SAP support.......................................................................................12

Installing SAP device types..............................................................................................................................................12

Modifying format and default settings........................................................................................................................12

Using the Visual Bar Code Designer..............................................14

Installing the Visual Bar Code Designer.......................................................................................................................14

Generating bar code data with Visual Bar Code Designer...................................................................................14

Creating and managing forms......................................................16

Forms overview....................................................................................................................................................................16

Forms menus.........................................................................................................................................................................17

Optional flash memory card or printer hard disk.....................................................................................................20

Capturing raw data for data mapping.........................................................................................................................20

Printing forms from a flash drive...................................................................................................................................20

Identifying the version of Forms on the Forms and Bar Code Card..................................................................21

Font limitations....................................................................................................................................................................21

Troubleshooting...............................................................................22

Ready message does not appear after installation.................................................................................................22

Make sure the Option Card is installed properly................................................................................................................. 22

Forms Manager does not see the printer...................................................................................................................22

Check the power............................................................................................................................................................................. 22

Is the printer connected to the network? .............................................................................................................................. 22

International fonts do not print as expected............................................................................................................22

Switch to one of the fonts available on the DLE card........................................................................................................ 22

Fonts in Forms Composer do not match those on the printed forms.............................................................22

Check the settings for both Lexmark Forms Composer and the printer.................................................................... 23

Check that font mapping has not been altered in Forms Composer .......................................................................... 23

Contents

Check that font mapping has not been altered for the printer .................................................................................... 23

Form did not merge as expected...................................................................................................................................23

Remove unnecessary characters from the beginning of the form............................................................................... 24

Page is plain text..................................................................................................................................................................24

Make sure to review the activation conditions in Forms Composer............................................................................ 24

Make sure the Forms merge function in the DLE is not deactivated by Forms Manager .................................... 24

Unable to fax or e-mail merged output.......................................................................................................................24

Check the settings for both Lexmark Forms Composer and the printer.................................................................... 24

Characters appear as boxes in PDFs viewed with Acrobat Reader...................................................................24

Use a different program to view PDFs .................................................................................................................................... 24

All forms are not listed.......................................................................................................................................................24

Data filters are not working.............................................................................................................................................25

Flash memory is full............................................................................................................................................................25

Is there any more space on the flash memory card? ......................................................................................................... 25

Is the flash memory fragmented?............................................................................................................................................. 25

Bar codes do not print as expected..............................................................................................................................25

Make sure the Option Card is compatible with the printer on which it is installed ...............................................25

Make sure that the Option Card is installed.......................................................................................................................... 25

When using a PCL 5 emulation printer driver, make sure that the escape sequence used to generate

the bar code is properly constructed................................................................................................................................. 25

Bar code will not generate when using certain PCL emulation printer drivers............................................25

Some printer drivers allow enhanced features to be disabled ...................................................................................... 26

Unexpected results after printing a bar code...........................................................................................................26

Make sure the PCL 5 emulation escape sequences are complete ................................................................................ 26

Make sure all parameters needed are fully specified......................................................................................................... 26

Printed bar code is unreadable......................................................................................................................................26

Make sure Print Quality settings are not too dark or too light....................................................................................... 26

Check the paper .............................................................................................................................................................................. 26

Notices................................................................................................27

Edition notice........................................................................................................................................................................27

European EC directives conformity statement for radio products....................................................................28

Index...................................................................................................31

Contents

Introduction

Overview

The Forms and Bar Code Card lets you print a wide variety of standard forms and bar codes. Using an algorithm, the

Forms and Bar Code Card can generate bar codes in either PCL 5 emulation or PostScript emulation.

Bar Code options include:

• OCR-A and OCR-B as bitmap and scalable fonts

• Independently scalable bar heights and widths

• RFID support

• Embedding text with selectable positioning

• Verifying data format, with error reporting

• Automatic bar code data compression, when required

• Automatic bar code checksum calculation and character placement, when required

• Automatic placement of special characters, when required

• Using PCL 5 emulation, the Forms and Bar Code Card:

– Is the functional equivalent of Hewlett Packard's Bar Codes & More font set.

– Is an alternative to an HP LaserJet with JetCAPS BarDIMM Pro (version 3.3A), including the FREESCAPE

alternative code feature.

– Provides custom device types for printing with SAPscript in SAP R/3 applications.

Forms options include:

• Storing and printing forms from an optional flash drive or optional/standard printer hard disk drive

• Built-in RFID support

• Creating electronic forms to be merged with data

• Sending merged output via fax and e-mail

Notes:

– Forms Composer and Forms Manager are required to create and manage forms.

– The forms files on the card will have the file extensions .LFM and .LFF.

– See the documentation that came with the printer, as well as the documentation that came with Forms

Composer, to find out more about using RFID when printing forms.

Installing the Forms and Bar Code Card

1 Print a Menu Settings page; keep it for later use.

Note: See the documentation that came with the printer for instructions on printing a Menu Settings page.

2 Turn off and unplug the printer.

3 Install the Forms and Bar Code Card.

Note: For more information on installing optional cards, see the documentation that came with the printer.

Introduction

4 Turn the printer on.

5 Print another Menu Settings page.

6 Verify the new card is listed as an installed option in the Printer Information section.

Note: If the card is not listed, turn off the printer, remove the card, and start again at step 2 on page 5.

7 Launch the CD.

8 Print a Menu Settings page.

9 Compare the settings listed to those from the page printed in step 1 on page 5.

10 Make changes as necessary.

Introduction

Supported fonts and bar codes

Bar codes

Supported bar codes

Type

Availability on Forms and Bar Code Card

PCL and PS Bar Codes Forms Merge Bar Codes

One-dimensional bar codes

Australian Post 4-state bar code (37-

CUST)

X X

Australian Post 4-state bar code (52-

FF-MET)

X X

Australian Post 4-state bar code (67-

FF-MET)

X X

British Royal Mail 4-state customer

code symbol (RM4SCC)

X X

Codabar (USD -4, NW -7, Monarch,

Code 2 of 7)

X X

Codabar with mod16 check digit

X X

Code 128 autoswitch

X X

Code 128 A X X

Code 128 B X X

Code 128 C X X

Code 3 of 9 X X

Code 3 of 9 with check digit

X X

Code 3 of 9 extended

X X

Code 3 of 9 extended with check digit

X X

Code 3 of 9 space encoding

Code 3 of 9 space encoding with

check digit

Code 93

X X

Code 93 extended

X X

Danish PTT 3 of 9

X X

Dutch Post 4-state bar code X X

EAN/JAN-8 X X

Supported fonts and bar codes

Type

Availability on Forms and Bar Code Card

PCL and PS Bar Codes Forms Merge Bar Codes

EAN/JAN-8 with 2-digit

supplemental

X X

EAN/JAN-8 with 5-digit

supplemental

X X

EAN/JAN-13

X X

EAN/JAN-13 with 2-digit

supplemental

X X

EAN/JAN-13 with 5-digit

supplemental

X X

EAN 128

X X

French Postal 3 of 9 A/R

X X

German Postal 2 of 5 Leitcode X X

German Postal 2 of 5 Identcode X X

HIBC 39/128 X X

Interleaved 2 of 5 X X

Interleaved 2 of 5 with check digit

X X

Industrial 2 of 5

X X

Industrial 2 of 5 with check digit

X X

ISBN

X X

ISBN+5

ISSN

X X

ISSN+2

ISSN+5 X

ITF-14 X

Japan Post 4-state bar code X X

Matrix 2 of 5 X X

Matrix 2 of 5 with check digit

X X

MSI

X X

MSI with mod10 check digit

X X

MSI with mod10 and mod10 check

digit

X X

MSI with mod11 and mod10 check

digit

X X

Singapore Post 4-state bar code

X X

Supported fonts and bar codes

Type

Availability on Forms and Bar Code Card

PCL and PS Bar Codes Forms Merge Bar Codes

Swiss Postal

X X

UCC 128

X X

UPC-A

X X

UPC-E

X X

UPC-A with 2-digit supplemental

X X

UPC-A with 5-digit supplemental

X X

UPC-E with 2-digit supplemental

X X

UPC-E with 5-digit supplemental X X

USPS PLANET bar code X X

USPS POSTNET 5-digit ZIP code X X

USPS POSTNET 9-digit ZIP with 4 code X X

USPS POSTNET 11-digit Delivery

Point Code

X X

USPS Expanded POSTNET

USPS Tray label, 10-digit 2 of 5

X X

USPS Sack label, 8-digit 2 of 5

X X

USPS Zebra code

X X

USPS FIM (Facing Identification

Marking)

X X

Two-dimensional bar codes

Aztec

Codablock F X X

Data Matrix X X

MaxiCode X X

MicroPDF417 X X

PDF417

X X

RSS-14

X X

RSS-14 Expanded

X X

RSS-14 Limited

X X

RSS-14 Stacked

X X

RSS-14 Truncated

X X

Composite bar codes

Supported fonts and bar codes

Type

Availability on Forms and Bar Code Card

PCL and PS Bar Codes Forms Merge Bar Codes

EAN-8

X X

EAN/JAN-8 with 2-digit

supplemental

X X

EAN/JAN-8 with 5-digit

supplemental

X X

EAN-13

X X

EAN/JAN-13 with 2-digit

supplemental

X X

EAN/JAN-13 with 5-digit

supplemental

X X

RSS-14 Expanded

X X

RSS-14 Limited X X

RSS-14 X X

RSS-14 Stacked X X

RSS-14 Truncated X X

UCC-128

X X

UPC-A

X X

UPC-E

X X

UPC-A with 2-digit supplemental

X X

UPC-A with 5-digit supplemental

X X

UPC-E with 2-digit supplemental

X X

UPC-E with 5-digit supplemental

X X

Fonts

Supported fonts

To obtain the PCL 5 escape sequences used to select these fonts, print the font list using the printer control panel.

For more information about the printer control panel, see the documentation that came with the printer.

Font Type Resides

Architext CMC7 Scalable On option card

CMC7 Scalable On option card

Code 3of9 4.69 Bitmap On option card

Code 3of9 8.11 Bitmap On option card

Supported fonts and bar codes

Font Type Resides

Electrical symbols Scalable On option card

Euro and other currency symbols Scalable On option card

Line Draw Bitmap On option card

Manufacturing symbols Scalable On option card

MICR Scalable On option card

OCR-A Bitmap On option card

OCR-A Scalable On option card

OCR-B Bitmap On option card

OCR-B* Scalable On option card

OCR-B in Bubbles Scalable On option card

Roman Pillar Scalable On option card

Roman Pillar Italic Scalable On option card

Roman Pillar Bold Scalable On option card

Roman Pillar Bold Italic Scalable On option card

Roman Pillar5 Scalable On option card

UPC 10mil Bitmap On option card

UPC 13mil Bitmap On option card

Installing fonts on the Forms and Bar Code Card

Forms created in Forms Composer may not match those printed using a printer with an installed Forms and Bar Code

Card. Generally, this is because the fonts used on the computer that hosts Forms Composer do not match those used

by the Forms and Bar Code Card.

To resolve this, you can change the fonts used in Forms Composer to match those used by the Forms and Bar Code

Card, or you can install matching fonts on the Forms and Bar Code Card. See the Forms Manager documentation for

instructions on installing new fonts on the Forms and Bar Code Card.

Supported fonts and bar codes

SAP support

When used in PCL 5 emulation mode, SAP ERP software has built-in support for many of the functions provided by

the Forms and Bar Code Card.

SAP systems support the following device types. These device types may already exist on the SAP system:

• LEXT622

• LEXW820

• ZLXFORM2

Installing SAP device types

You must be the SAP BASIS administrator to install SAP devices. To install these device types:

1 Start transaction SE38.

2 Execute report RSTXSCRP to load the device type ZLXFORM2.

3 Type the name of the device type in the Object Name field.

Note: Type only the device name, not the .PRI extension.

4 Select the IMPORT mode.

5 Press the EXECUTE button (F8).

6 Reset the SAPscript cache:

a Call transaction SE38.

b Execute the report RSTXDELL, using client = '*'.

7 Reset the character code cache:

a Start transaction SP12.

b Click character sets  Conf. buffer (CCC)  Invalidate CCC.

Note: The reset procedure is only valid on the actual instance, therefore you must connect on the instance on which

the spool work process is running.

8 Restart the spool work process.

a Highlight the spool work process SPO.

b Click Process  cancel without core.

Note: The spool work process should automatically restart after a few seconds or the next interrupt.

Modifying format and default settings

1 Start transaction SPAD.

2 Click Full Administration.

3 Click Device Types.

4 Double-click the device type.

SAP support

5 Click Format.

6 Double-click the format to modify.

7 Click Change.

8 Double-click Printer Initialization.

9 Remove the hash “#” from the beginning of each needed line.

10 Click Save.

11 Click Save again.

SAP support

Using the Visual Bar Code Designer

The Visual Bar Code Designer is a separate application that lets the user select the bar code symbology, enter data

to be encoded, and prompts the software to generate the bar code symbol.

Installing the Visual Bar Code Designer

The Visual Bar Code Designer provides support for the following operating systems:

• Windows Vista

• Windows XP

• Windows 2000

• Windows NT 4.0

• Windows 98

• Windows 95

To install the Visual Bar Code Designer:

1 Insert the CD in the computer.

2 Run Setup.exe from the Designer subdirectory.

3 Review and accept the License agreement.

4 Select the folder to install the Visual Bar Code Designer.

Generating bar code data with Visual Bar Code

Designer

The Visual Bar Code Designer generates the PCL escape sequences, PCL HEX, or PostScript command sequences for

bar codes. This data can be then be used within an application, SAP device type, or as a file to test print the bar code

using the Forms and Bar Code Card.

1 Do one of the following:

• In Windows Vista, click .

• In Windows XP and earlier, click Start.

2 Click Programs or All Programs.

3 Click Visual Bar Code Designer.

4 Double-click the desired bar code symbology from the Barcode list window.

The bar code dialog appears.

5 Modify the bar code settings as desired.

6 From the Edit menu, copy the desired data stream to the clipboard, and then paste the text string to your

application.

Using the Visual Bar Code Designer

Notes:

• Once the bar code data is generated, the test bar code can be printed by clicking the Print icon on the toolbar.

The image of the bar code will print on any printer, including those without a Forms and Bar Code Card installed.

As a result, the test bar code may be suitable for scanning.

• For additional information, click the Visual Bar Code Designer Help menu, or consult the Forms and Bar Code

Card Technical Reference Manual.

Using the Visual Bar Code Designer

Creating and managing forms

Forms overview

Electronic forms solutions integrate both electronic and hardcopy documents, and give the user the ability to create

custom forms to create a dynamic document workflow for any business. The forms can either be printer-based or

server-based. You can quickly design electronic forms, store them on a printer, automatically merge with text files

and print, fax, e-mail, and/or archive the output.

The electronic forms solutions contain different modules that automate your workflow processes. These modules

include Forms Composer and Forms Manager.

Note: Forms Composer and Forms Manager are required software programs that are purchased separately.

Forms Composer is a design tool that offers the following features:

• Easy-to-use GUI interface to create forms and map data onto the forms

• Import existing PDF-based documents for compatibility

• Create documents for printer-based and server-based technologies

Forms composer provides an easy-to-use interface to create forms. The data pane of Forms Composer allows mapping

variable data that comes from the host system. You can set the paper size and input text before downloading the

form to the printer’s flash or optional/standard printer hard disk. Once a form is designed and is in the printer, data

can be sent directly from your host computer over a TCP/IP network, through a USB connection to the printer, through

a parallel card to the printer, or through a serial card to the printer. The Forms and Bar Code Card then merges the

data with the correct form using pre-defined activation conditions. Activation conditions are defined as triggers that

allow you to select the correct formset that has been uploaded on the printer’s memory or a hard drive. You define

activation conditions when designing your form in Forms Composer or by creating a Forms Directive. Every time you

create a new form for a dataset, you are creating a project, which you will upload to a printer with both userflash and

Forms and Bar Code Card installed.

Forms Manager downloads and manages formsets on printers with the Forms and Bar Code Card. You can add

formsets to printers, retrieve printer information, and view saved files on the printer. Using Forms Manager, you can

also upgrade the Forms and Bar Code Card firmware on the printer.

The Forms and Bar Code Card has firmware that automatically merges the data with the correct form design (formset)

and prints the completed form. The host data stream can be SAP RDI, ASCII or double byte data encoded in GBK,

UTF-8, or UTF-16. The Forms and Bar Code Card uses TrueType fonts Adobe Font Manager (AFM) fonts to generate

PDF output.

Creating and managing forms

Forms menus

Once a Forms and Barcode Card is installed, additional menu items are added to the standard printer menus. These

menu items can be found in the Forms Card menu.

Menu item Description

Data Filter

Disabled

NULL

OFIS

OFIS+NULL

AS400

PCL

ZPL

ZPL-F

If a data filter is enabled, the incoming forms job is run through

that filter before processing by the DLE.

Notes:

• Disabled—Indicates that all data filters are off.

• NULL—Removes all NULL characters.

• OFIS—Removes all Optra Forms

Initialization strings.

• OFIS+NULL—Removes all NULL characters and all Optra

Forms initialization strings.

• AS400—Removes extraneous lines of data due to AS400

formatting.

• PCL—Removes all PCL escape sequences and leaves plain

text.

• ZPL—Removes Zebra Printer Language directives.

• ZPL-F—The same as ZPL, except it uses @ as the escape

character instead of ^.

Creating and managing forms

Menu item Description

Print All Forms When this option is selected, the printer will print all formset

information found on the Forms and Bar Code Card. The

information printed for each formset includes:

• Form name

• Thumbnail picture of the first page of the formset (if

available)

• Formset location—for example, whether it is located on

the userflash, printer hard disk, or on a USB flash drive

• Page size

• Orientation

• When the formset was last modified

• Datamap file name

• Paper tray the form will print from

• Output bin the form will be collected in

• Project activation condition(s)

• Subform(s) information, including:

– Subform(s) used

– Subform name(s)

– Subform datamap file name(s)

– When subform(s) was/were last modified

Note: If a .ppf file exists for the formset, then the paper try

and output bin information is read from the .ppf file and

listed under the .ppf file name.

• Printer-specific information, including:

– FM code version number

– Total size of the printer hard disk and/or the userflash

– Available size of the printer hard disk and/or userflash,

as well as remaining free space

– Local port timeout

Note: If both a printer hard disk and userflash are installed,

then both total size and available size for the userflash will

be displayed. Only the forms on the userflash will be

accessible.

Creating and managing forms

Menu item Description

Print Port Setting

Off

This setting allows Formsmerge to be turned on or off for the

selected port(s). Formsmerge is on for all ports by default.

Possible ports are:

• Network Port

• USB Port

• Parallel Port

• Serial Port

Note: If a port is on, then all data sent to that port is processed

by the Formsmerge code. If a port is off, however, then all data

sent to that port is processed by the printer as if the

Formsmerge is not installed. Specifically, the data file is printed

as determined by the basic Printer Language Setting.

Error Page Print

Off

On prints an error page when an error is encountered by the

DLE.

Alt Esc Code

Off

Specifies whether to allow the use of an alternate escape

character when processing PCL escape sequences. This is a Bar

Code DLE function.

Notes:

• On uses an alternate escape code character in addition to

the default escape code character.

• Off uses the default escape code character.

Alt Esc Code Char

126 (~)

34 (“)

35 (#)

36 ($)

47 (/)

63 (?)

92 (\)

123 ({)

124 (|)

125 (})

When Alt Esc Code is On, uses the selected character in

addition to the default escape character.

Local Port Timeout

This option allows users to select a timeout value (between 1

and 100 seconds) for forms jobs that come in on any of the

local ports (serial, USB, or parallel). This setting does not apply

to jobs sent to the network ports. The default value is 4

seconds.

When Formsmerge is active on a local port, then a job will

timeout when triggered by the Local Port Timeout or the

Printer Timeout—whichever is smallest. This will terminate the

current job as if an End of Form character has been reached.

Creating and managing forms

Optional flash memory card or printer hard disk

In order to store forms on the printer, an optional flash memory card or printer hard disk must be installed. Once

installed, use Forms Manager to interact with the optional flash memory card drive or printer hard disk.

Use Forms Manager to:

• Store forms on the flash memory card or printer hard disk.

• Erase all forms from the flash memory card or printer hard disk.

• View all forms currently stored on the printer.

Note: The printer may have a standard printer hard disk installed. If not, an optional printer hard disk must be installed

in order to store forms.

Capturing raw data for data mapping

Capturing raw data is necessary in order to properly map data to forms. For additional information on capturing raw

data, see the documentation that came with Forms Manager.

To capture raw data:

1 In Forms Manager, go to Printer Properties and set the Printer to Data Capture mode.

2 Send the data file to the printer.

3 Refresh the printer in Forms Manager.

The data file is now listed, and you can select to retrieve it.

Printing forms from a flash drive

The Create Flash File option in Forms Manager is used to add one or more Formsets to printers that are not attached

to the network. The Flash file allows Forms Manager to communicate with these printers. The Flash file that is created

contains everything needed to add the Formset(s) to the printer. Once created, the file can be saved to a flash drive

and then accessed through the USB port on the printer.

See the Forms Manager documentation for more information on creating Flash files.

Notes:

• If formsets on the flash drive and in the printer memory or hard disk contain the same activation conditions, then

the formsets on the flash drive will be used when those conditions are met.

• This function is supported only by devices with a port for a flash drive.

Creating and managing forms

La pagina sta caricando ...

Lexmark Monochrome Laser Manuale utente

Marca: Lexmark

Modello: Monochrome Laser

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: Lexmark Monochrome Laser User manual

Documenti correlati

Lexmark 2490 - Forms Printer B/W Dot-matrix Manuale utente

Lexmark Monochrome Laser Manuale utente

Lexmark Monochrome Laser Manuale utente

in altre lingue

Documenti correlati

Altri documenti