Canon imageFORMULA DR-6030C Guida utente

User Manual

• Please read this manual before operating this

scanner.

• After you finish reading this manual, store it in a safe

place for future reference.

2

FCC REGULATIONS (For 120 V model)

Document Scanner, Model M111061

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the

equipment OFF and ON, the user is encouraged to try to correct the

interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with Class B limits in

Subpart B of Part 15 of FCC Rules.

Do not make any changes or modifications to the equipment unless

otherwise specified in the manual. If such changes or modifications

should be made, you could be required to stop operation of the

equipment.

Canon U.S.A. Inc.

ONE CANON PARK, MELVILLE, NY 11747, U.S.A.

Tel. No. (800)652-2666

RADIO INTERFERENCE REGULATIONS (For 120 V

models)

This digital apparatus does not exceed the Class B limits for radio

noise emissions from digital apparatus as set out in the interference-

causing equipment standard entitled “Digital Apparatus”, ICES-003 of

the Industry Canada.

RÈGLEMENT SUR LE BROUILLAGE RADIOÉLECTRIQUE

(For 120 V models)

Cet appareil numérique respecte les limites de bruits radioélectriques

applicables aux appareils numériques de Classe B prescrites dans la

norme sur le matériel brouilleur: “Appareils Numériques”, NMB-003

édictée par l’Industrie Canada.

ENERGY STAR

®

Office Equipment Program

This program is for U.S.A and Canada.

As an ENERGY STAR

®

Partner, CANON

ELECTRONICS INC. has determined that this

machine meets the ENERGY STAR

®

Program

guidelines for energy efficiency.

The ENERGY STAR

®

Office Equipment Program is

an international program that promotes energy saving through the use

of computers and other office equipment. The program backs the

development and dissemination of products with functions that

effectively reduce energy consumption. It is an open system in which

business proprietors can participate voluntarily. The targeted products

are office equipment, such as computers, monitors, printers, fax,

machine, copiers, and scanners. The standards and logos are uniform

among participating nations.

European Union (and EEA) only.

This symbol indicates that this product is not to be disposed

of with your household waste, according to the WEEE

Directive (2002/96/EC) and your national law. This product

should be handed over to a designated collection point,

e.g., on an authorized one-for-one basis when you buy a

new similar product or to an authorized collection site for recycling

waste electrical and electronic equipment (EEE). Improper handling of

this type of waste could have a possible negative impact on the

environment and human health due to potentially hazardous

substances that are generally associated with EEE. At the same time,

your cooperation in the correct disposal of this product will contribute

to the effective usage of natural resources. For more information

about where you can drop off your waste equipment for recycling,

please contact your local city office, waste authority, approved WEEE

scheme or your household waste disposal service. For more

information regarding return and recycling of WEEE products, please

visit www.canon-europe.com/environment

.

(EEA: Norway, Iceland and Liechtenstein)

3

Model Names

The following name may be provided for the safety regulations in each

sales region of the Document Scanner.

DR-6030C: Model M111061

Reproduction Warning

This device is designed to be used in a legal manner, in accordance

with all applicable laws, including, but not limited to, counterfeit and

copyright laws, as well as laws pertaining to national security.

Any person(s) found to have reproduced any of the following materials

(regardless of whether such reproduction was intentional or not) for

the purpose of misrepresenting such material as the original may be

prosecuted in accordance with the applicable laws and regulations.

• Paper money or bank notes (domestic and foreign)

• Postage stamps, revenue stamps, or other similar stamps

• Stock certificates, bond certificates, promissory notes, cheques, or

other valuable certificates

• Passports, licenses, or other certificates or documents issued by

government officials or agencies

This is not an exhaustive list.

Canon is not responsible for how this scanner is used by an individual.

Please note that certain intellectual property is protected by copyright

law, and copyrighted items may not be reproduced without the

express permission of the copyright holder except for personal or

household use under limited circumstances.

Trademarks

• Canon and the Canon logo are registered trademarks, of Canon Inc.

in the United States and may also be trademarks or registered

trademarks in other countries.

• imageFORMULA is a trademark of CANON ELECTRONICS INC.

• Microsoft, Windows, PowerPoint, and SharePoint are registered

trademarks or trademarks of Microsoft Corporation in the United

States and other countries.

• Microsoft product screen shot(s) reprinted with permission from

Microsoft Corporation.

• ISIS is a registered trademark of Open Text in the United States.

• Adobe, the Adobe logo, Acrobat, the Adobe PDF logo, and Adobe

Reader are either registered trademarks or trademarks of Adobe

Systems Incorporated in the United States and/or other countries.

• Other product and company names herein may be the trademarks

of their respective owners. However, the

TM

and

®

symbols are not

used in this document.

Copyright

No part of this publication may be reproduced or transmitted in any

form or by any means, electronic or mechanical, including

photocopying and recording, or by any information storage or retrieval

system without the prior written permission of CANON

ELECTRONICS INC.

Disclaimers

The information in this document is subject to change without notice.

CANON ELECTRONICS INC. MAKES NO WARRANTY OF ANY

KIND WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR

IMPLIED, EXPECT AS PROVIDED HERE IN, INCLUDING

WITHOUT LIMITATION, THERE OF, WARRANTIES AS TO

MARKETABILITY, MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE OF USE OR NON-INFRINGEMENT.

CANON ELECTRONICS INC. SHALL NOT BE LIABLE FOR ANY

DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY

NATURE, OR LOSSES OR EXPENSES RESULTING FROM THE

USE OF THIS MATERIAL.

4

Setup Guide

STEP 1 Checking the Accessories

If any of the items listed below are missing or damaged, contact your local authorized Canon dealer or service representative.

About the Setup Disc

The Canon DR-6030C scanner setup disc contains the software listed

below:

● DR-6030C Driver

Scanner driver for use with the DR-6030C scanner.

● CapturePerfect 3.1

ISIS-compatible application developed for Canon document

scanners.

Scanner USB Cable

Setup Guide Warranty Card

(U.S.A. and Canada only)

Setup Disc

Power Cord

Cleaning Cloth (1)

Document Eject Guide

• Items included in this manual are subject to change without notice.

• You must keep the machine’s packaging and packing materials for storing or transporting the machine.

• The shape of the power plug varies by country and region.

Please read first.

5

After taking the scanner out of the box, remove all the orange tape and the protective materials (▼) from the

scanner.

6

System requirements

To use the scanner, your computer must satisfy the following system

requirements.

Computer

CPU: Intel Core 2 Duo 1.66GHz or faster

Memory: 1GB or more

Hard disk: 3 GB or more available space required for

installation of all software

USB interface: Hi-Speed USB2.0

Monitor: Resolution of 1024 × 768 (XGA) or better

recommended.

Optical drive: Drive capable of reading CDs/DVDs.

Operating system

• Microsoft Windows 7 Service Pack 1 or later (32-bit and 64-bit

editions)

• Microsoft Windows 8.1 (32/64-bit version)

• Microsoft Windows 10 (32-bit and 64-bit editions)

• Microsoft Windows Server 2008 R2 Service Pack 1 or later

• Microsoft Windows Server 2012 R2

• Microsoft Windows Server 2016

• Microsoft Windows Server 2019

This is the environment as of December 2018.

For the latest software support information, go to the Products page

on the Canon website.

IMPORTANT

• Use the USB interface provided as standard with your computer.

However, normal operation is not guaranteed with all USB

interfaces, even if present as standard equipment on the computer.

For details, consult your local authorized Canon dealer.

• Scanning speeds are lower if your computer’s standard USB

interface is USB Full-Speed (equal to USB 1.1.)

• The USB cable you are using should be the one originally included

with the scanner.

• If the CPU, memory, interface card, and other specifications do not

satisfy the installation requirements, the scanning speed may be

greatly reduced and transmission may take a long time.

• Even if the computer satisfies the system requirements, the

scanning speed may vary, depending on the specification of the

computer and the environment.

• The scanner drivers provided with the scanner do not necessarily

operate on all ISIS or TWAIN-compatible applications. For details,

contact your application software retailer.

• In Windows 10 tablet mode, the software may disrupt the display.

Precautions for Use in 64-bit Operating Systems

• The ISIS/TWAIN driver supplied with this product supports

scanning with 32bit applications only.

• Even with 32-bit applications, not all ISIS/TWAIN compliant

applications are guaranteed to operate.

• Scanning speed may vary depending on the specifications of your

computer.

Installing the Software

Follow the installation procedure in the supplied manual to install the

software. When following the procedure, substitute any differences in

terminology with the user interface and folder names that are

appropriate for your operating system.

STEP 2 Installing the Software

7

Software Installation

IMPORTANT

• Install the software before connecting the scanner to the computer.

• Log on to Windows as an Administrator.

• Close all other applications before installing the software.

1

Insert the Setup Disc into the disk drive of the computer.

The setup menu automatically starts up when you insert the disc

into the drive. (If the menu does not start up, execute setup.exe

from the disc.)

If the following screen appears, click [Yes] or [Permissions].

2

Click [Typical Installation].

Hint

If you want to reinstall only specific software that you have

previously uninstalled, select [Custom Installation] and specify

the software.

3

Click [Install].

8

4

Follow the instructions on the screen to complete

installation.

5

Click [Exit] to finish installing the software.

9

Connect the scanner to the computer and the power supply.

IMPORTANT

• Do not connect the scanner to the computer before installing the software.

• Before connecting the scanner to the computer, verify that the power of the scanner is OFF.

If the power is ON, turn it OFF.

Turn

OFF

STEP 3 Connecting to a Computer

10

The power of the scanner can be turned ON and OFF with the power

button on the front of the scanner.

1

Make sure that the scanner and computer are connected

properly.

2

Press the power button.

The power indicator lights green when the power turns ON.

Hint

A balloon message such as shown below appears on the task bar. If

you wait a while, automatic scanner recognition will end and the

scanner will become ready to use.



Turning Off the Power

Press and hold the power button until the power indicator goes out.

IMPORTANT

• After turning the scanner off, wait at least 10 seconds before turning

it back on.

• If you will not be using the scanner for an extended period, you

should disconnect the power cord from the AC outlet for safety.

Hint

The scanner’s auto power off setting is enabled by default, and the

scanner will turn off automatically if it is not operated for 4 hours. For

details on how to disable this setting, see “Auto Power Off Setting” on

p. 58.

STEP 4 Turning the Power ON

11

INTRODUCTION

Thank you for purchasing the Canon DR-6030C document scanner.

Please read this manual thoroughly before using the machine to

familiarize yourself with its capabilities, and to make the most of its

many functions. After reading this manual, store it in a safe place for

future reference.

Manuals for the Scanner

Documentation for this scanner consists of the following manuals.

● Setup Guide

This manual describes the procedure for removing the scanner

from its box through to setting up the scanner for scanning.

● User Manual (this manual)

This manual describes the basic operations for using the scanner,

performing routine maintenance, and troubleshooting, and provides

the scanner specifications.

● CapturePerfect 3.1 Operation Guide (PDF manual)

CapturePerfect 3.1 and its Operation Guide are both installed on

your computer with CapturePerfect 3.1 Operation Guide. (See

p. 30)

Hint

• The manual (User Manual) for this scanner is stored on the Setup

Disc as an electronic manual in PDF format.

• If you are using Windows, the User Manual (electronic manual) will

be registered to the following location when the software is installed.

Hint

In Windows 8.1, it is registered at the following location.

12

Symbols Used in This Manual

The following symbols are used in this manual to explain procedures,

restrictions, handling precautions, and instructions that should be

observed for safety.

WARNING

Indicates a warning concerning operations that may lead to death

or injury to persons if not performed correctly. To use the scanner

safely, always pay attention to these warnings.

CAUTION

Indicates a caution concerning operations that may lead to injury to

persons, or damage to property if not performed correctly. To use

the scanner safely, always pay attention to these cautions.

IMPORTANT

Indicates operational requirements and restrictions. Be sure to

read these items carefully to operate the scanner correctly, and

avoid damaging the scanner.

Hint

Indicates a clarification of an operation, or contains additional

explanations for a procedure. Reading these notes is highly

recommended.

13

Table of Contents

Setup Guide .........................................................................4

Turning Off the Power ........................................................... 10

INTRODUCTION.................................................................11

Symbols Used in This Manual.................................................... 12

Before Using the Scanner.......................... 14

Important Safety Instructions..................................... 14

Installation Location .............................................................. 14

Power.................................................................................... 14

Moving the Scanner .............................................................. 15

Handling................................................................................ 15

Disposal ................................................................................ 16

When sending the scanner for repairs .................................. 16

Features of the Scanner.............................................. 17

Names and Functions of Parts ................................... 19

Basic Operation ......................................... 21

Documents ................................................................... 21

How to Place Documents............................................ 22

Switching the Feed and Eject Methods................................. 22

Installing the Document Eject Guide ..................................... 23

Placing Documents ............................................................... 24

Placing Cards........................................................................ 26

Setting the Long Document Mode......................................... 27

Detecting a document double feed ....................................... 28

Detecting Skewed Documents .............................................. 29

Scanning methods ..................................... 30

Scanning with CapturePerfect.................................... 30

Scanning with CapturePerfect............................................... 30

Starting CapturePerfect 3.1 with the Start Button ................. 31

Setting the Scanner Driver.......................................... 32

Configuration and Functions of the Scanner Driver .............. 32

Setting Basic Scanning Conditions ....................................... 33

More Advanced Scanning Methods

(Batch Separation)....................................................... 43

Batch separation using patch code sheets ........................... 43

Maintenance .............................................. 46

Daily Maintenance........................................................ 46

Cleaning the Scanner............................................................ 46

Cleaning the Inside of the Scanner ....................................... 46

Cleaning the Sensor Glass, Shading Boards,

and the Rollers ...................................................................... 46

Cleaning the Shading Boards................................................ 48

Replacing Consumable Parts...................................... 50

Sleep mode Setting............................................................... 57

Auto Power Off Setting.......................................................... 58

Troubleshooting ......................................... 60

Common Problems and Solutions.............................. 60

Software Troubleshooting........................................... 62

Useful tips..................................................................... 63

Clearing a Paper Jam................................................... 64

Uninstalling the Software ............................................ 66

Appendix .................................................... 67

Specifications............................................................... 67

Replacement parts ................................................................ 68

Options.................................................................................. 68

Dimensions............................................................................ 69

Index.............................................................................. 70

14

Before Using the Scanner

Important Safety Instructions

To ensure the safe operation of this scanner, be sure to read the

safety warnings and precautions described below.

Installation Location

The performance of this scanner is affected by the environment in

which it is installed. Make sure that the location where the scanner is

installed meets the following environmental requirements.

● Provide adequate space around the scanner for operation,

maintenance, and ventilation.

● If scanned documents are ejected to the back of the scanner,

provide adequate space behind the scanner for documents ejected

after being scanned.

● Avoid installing the machine in direct sunlight. If this is unavoidable,

use curtains to shade the scanner.

● Avoid locations where a considerable amount of dust accumulates

as dust may adversely affect the inside of the scanner.

● Avoid warm or humid locations, such as in the vicinity of a water

faucet, water heater, or humidifier. Avoid locations where ammonia

gas is emitted. Avoid locations near volatile or flammable materials,

such as alcohol or paint thinner.

● Avoid locations that are subject to vibration.

● Avoid exposing the scanner to rapid changes in temperature. If the

room in which the scanner is installed is cold but rapidly heated,

water droplets (condensation) may form inside the scanner. This

may result in a noticeable degradation in scanning quality. The

following conditions are recommended for optimal scanning

quality:

Room temperature: 10 °C to 32.5 °C (50 °F to 90.5 °F)

Humidity: 20% to 80% RH

● Avoid installing the scanner near equipment that generates a

magnetic field (e.g. speakers, televisions, or radios.)

Power

● Connect only to a power outlet of the rated voltage and power

supply frequency. (either 120 V, 60 Hz or 220-240 V, 50/60 Hz

depending on your region)

● Do not use a power supply that is not rated for the specified voltage.

Doing so might cause fire or electric shock.

● Do not connect other electrical equipment to the same power outlet

to which the scanner is connected. Also, when using an extension

cord, make sure that the extension cord is rated for the current

requirements of the scanner.

● The power cord may become damaged if they are often stepped on

or if heavy objects are placed on them. Continued use of a

damaged power cord can lead to an accident, such as a fire or

electrical shock.

● Do not use the power cord while it is coiled.

● Do not pull directly on the power cord. When disconnecting the

power cord, grasp the plug and remove it from the outlet.

● Keep the area around the power plug clear of objects so that the

power cord can be disconnected easily in an emergency.

100mm

(3.94")

100mm

(3.94")

100mm

(3.94")

15

● If you have any questions regarding the power supply, contact your

local authorized Canon dealer or service representative for further

information.

Moving the Scanner

● When moving the scanner, always hold it with both hands to avoid

dropping it. The scanner weighs approximately 21.8 lb (9.9 kg)

alone.

● Make sure to disconnect the interface cable and power cord. If the

scanner is transported with these items plugged in, the plugs and

connectors may be damaged due to physical shock.

Handling

WARNING

Note the following precautions whenever using the scanner. Failure to

do so may result in a fire or electric shock.

■ Never use alcohol, benzene, paint thinner, aerosol sprays, or any

other highly flammable substance near the scanner.

■ Do not cut, damage, or modify the power cord. Do not place heavy

objects on the power cord, and do not pull or excessively bend the

power cord.

■ Never connect the power cord when your hands are wet.

■ Do not connect the scanner to a multi plug power strip.

■ Do not knot or coil the power cord as this may result in a fire or

electric shock. When connecting the power cord, make sure that the

power plug is securely and completely inserted into the power

outlet.

■ The supplied power cord set is intended for use with this scanner

only. Do not use it with other electronic equipment. In addition, do

not use power cord sets other than the one supplied with the

scanner. Doing so may result in fire or electric shock.

■ Do not take the scanner apart or modify it.

■ Never try to take the scanner apart or modify it in any way, as this

is dangerous and may lead to a fire or electric shock.

■ Do not use flammable spray near the scanner.

■ When cleaning the scanner, push the power button to turn it OFF

and disconnect the power cord from the power supply.

■ Clean the scanner using a slightly dampened cloth which has been

well wrung out. Never use alcohol, benzene, paint thinner, or any

other flammable substances.

■ If the scanner makes strange noises, or gives off smoke, heat, or

strange odors, or the scanner does not function or other

abnormalities occur when you use the machine, immediately push

the power button to turn it off, and disconnect the power plug from

the power outlet. Then, contact your local authorized Canon dealer

or service representative to have the unit serviced.

■ Do not drop the scanner, or subject it to impact or strong shock.

Should the scanner ever become damaged, immediately push the

power button to turn it OFF, and disconnect the power plug from the

power outlet. Then, contact your local authorized Canon dealer or

service representative to have the unit serviced.

■ Before moving the scanner, be sure to push the power button to turn

it OFF, and disconnect the power plug from the power outlet.

■ To customers with cardiac pacemakers

The scanner generates a weak magnetic field. If customers using

cardiac pacemakers experience any abnormalities, move away

from the scanner and consult a physician.

16

CAUTION

■ Do not install the scanner on a surface that is unstable or tilted, or

in an area subject to excessive vibrations, as this may cause the

scanner to fall, resulting in personal injury or damage to the

scanner.

■ Do not block ventilation openings. Doing so could case the scanner

to overheat, creating a risk of fire.

■ Never place small metal objects such as staples, paper clips, or

jewelry on the scanner. These items may fall into the scanner, and

cause a fire or electric shock. Should such objects ever fall inside

the scanner, immediately push the power button to turn it OFF, and

disconnect the power plug from the power outlet. Then, contact

your local authorized Canon dealer or service representative to

have the unit serviced.

■ Do not locate the scanner in a humid or dusty location. Doing so

might cause fire or electric shock.

■ Do not place objects on top of the scanner. Such objects may tip or

fall over, resulting in personal injury.

■ When unplugging the power cord, grasp it firmly by its plug. Do not

pull directly on the power cord, as this may damage or expose the

cord’s internal wiring, resulting in a fire or electric shock.

■ Leave sufficient space around the power plug so that it can be

unplugged easily. If objects are placed around the power plug, you

will be unable to unplug it in an emergency.

■ Do not allow water or flammable substances (alcohol, paint thinner,

benzene, etc.) to spill into the scanner, as this may result in a fire or

electric shock.

■ Turn OFF the power switch for safety when not using the scanner

for a long period of time, such as overnight. Also, turn OFF the

power switch, and disconnect the power cord from the power outlet

for safety when the machine will not be used for an extended period

of time, such as during consecutive holidays.

■ Do not wear loose clothing or jewelry that may get caught in the

scanner while you are using it. This may result in personal injury. Be

extra careful of neckties and long hair. If anything becomes caught

in the scanner, immediately disconnect the power cord to stop the

scanner.

■ Be careful when placing paper in the scanner and when removing

jammed paper. It is possible to cut your hand on the edge of a sheet

of paper.

Disposal

When disposing of this scanner, be sure to follow all local ordinances

and laws or consult with the retailer who sold you the scanner.

When sending the scanner for repairs

When a request is made for repairs, the scanner needs to be sent to

the specified address. When sending the scanner, use the packing

box in which it came. Firmly secure the scanner with packaging

material when you place it in the packing box.

17

Features of the Scanner

The main features of the DR-6030C document scanner are described

below.

●

The scanner can scan a maximum of 60 documents per minute in

a range of sizes from business cards to A3 size. (Scanning

conditions: Black and white, LTR/A4 size portrait, two sided, 200

dpi.)

●

The scanner supports USB interface that was provided as standard

on your computer.

●

Documents can be scanned in 24-bit color or 256-level grayscale.

●

The scanner supports the following scanning modes, depending on

the document type:

•

●

Documents are fed and ejected from the front of the scanner.

●

Documents are ejected to the back of the scanner. Note, the ejected

documents are stacked in reverse order to how they were fed.

●

The scanner automatically detects the size of a scanned document

and eliminates any unnecessary space around the edges of the

image when storing it, even when storing a document of irregular

size.

●

The scanner stops feeding documents after detecting more than

one document being fed at the same time.

●

The scanner stops feeding documents after detecting skewed

document hitting the edges of the document feed opening.

●

The scanner straightens an image after detecting an image on a

document that was loaded askew.

●

The scanner detects whether the scanned document is in color or

black-andwhite, and save the image accordingly.

●

It is possible to scan business card.

●

Identifies the orientation of characters in a document, and rotates

the image so the orientation of the scanned characters is straight.

●

The scanner is equipped with an Advanced Text Enhancement

Mode to enhance the text of documents with dark or uneven

backgrounds, and an Advanced Text Enhancement II mode to

enhance the text when both the text and background are light.

*These modes may not work, depending on the type of document.

●

The scanner is equipped with a Dropout Color function that allows

you to specify a color for the scanner to omit from scanned images.

●

The scanner is equipped with an Auto Start function that

automatically initiates scanning when a document is placed in the

document feed tray.

●

The scanner is equipped with a Skip Blank Page function that

allows it to scan a document regardless of whether every document

is two-sided or onesided.

●

The scanner is equipped with a Prescan function that allows you to

adjust the contrast and brightness of a prescanned image and then

send the adjusted image to the application software, without

needing to scan the document again.

18

●

The scanner supports MultiStream, which, according to the

application, can create two images with different scanning

conditions from one image.

However, this function can only be used when the software

supports MultiStream.

●

Deletes black spots left when scanning documents that have had

holes punched in them to be stored in a binder.

●

You can scan documents that are a maximum of 118.1 inches

(3000 mm) long by setting the scanner in the Long document mode.

●

The scanner is able to scan carbonless duplicating paper.

●

This scanner is designed to save power by using the energy saving

feature except when scanning is being performed.

Hint

Some functions may not be available depending on the software you

are using.

19

Names and Functions of Parts

Front (Feed Tray Open)

A Document Feed Tray

Place the document to be scanned here.

B Document Guides

Adjust them to align with the width of the document.(See p. 25)

C Document Feed Tray

Extension Pull this tray out if the document hangs over the edge of

the main tray.(See p. 24)

D Document Eject Tray Extension

Open if the document extends beyond the edge of the eject

tray.(See p. 23)

E Document Eject Guide

Attach it to prevent thin or long documents from jamming when

being scanned.(See p. 23)

F Document Eject Tray

Scanned documents are ejected here.

G Document Guides 2

Adjust them to align with the width of the document.(See p. 25)

Controls

A Stop Button

Push it to stop scanning.

B Start Button

Push it to start scanning.

C Power Indicator

This indicator lights when the scanner is turned ON.

D Feed Selection Lever

Use it to change the way the documents are fed.

Move it up to continuously feed documents (Standard feeding).

(See p. 22)

Move it down to feed documents one at a time or to feed

documents that are fastened together, such as invoices, without

separating them (Non Separation feeding). (See p. 22)

E Document Stoppers

Moves up and down according to the paper feed switch lever.

F Power button

This switch is used to turn the scanner on.



























20

Rear

A Straight Path Tray

Switch the direction documents are eject by opening or closing this

tray. (See p. 22)

B USB Connector

Connect the USB cable.

C Ventilation Openings

D Power Connector

Connect to the power cord.

E Ventilation Openings

CAUTION

Do not block the ventilation openings. Doing so could cause the

scanner to overheat, creating a risk of fire.











La pagina sta caricando ...

Canon imageFORMULA DR-6030C Guida utente

Canon imageFORMULA DR-6030C Guida utente

in altre lingue

Documenti correlati

Altri documenti